Ruby.py revision 8638:e8a093d1e131 
1# Copyright (c) 2006-2007 The Regents of The University of Michigan
2# Copyright (c) 2009 Advanced Micro Devices, Inc.
3# All rights reserved.
4#
5# Redistribution and use in source and binary forms, with or without
6# modification, are permitted provided that the following conditions are
7# met: redistributions of source code must retain the above copyright
8# notice, this list of conditions and the following disclaimer;
9# redistributions in binary form must reproduce the above copyright
10# notice, this list of conditions and the following disclaimer in the
11# documentation and/or other materials provided with the distribution;
12# neither the name of the copyright holders nor the names of its
13# contributors may be used to endorse or promote products derived from
14# this software without specific prior written permission.
15#
16# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27#
28# Authors: Brad Beckmann
29
30import math
31import m5
32from m5.objects import *
33from m5.defines import buildEnv
34
35def define_options(parser):
36    # ruby network options
37    parser.add_option("--topology", type="string", default="Crossbar",
38                 help="check src/mem/ruby/network/topologies for complete set")
39    parser.add_option("--mesh-rows", type="int", default=1,
40                      help="the number of rows in the mesh topology")
41    parser.add_option("--garnet-network", type="string", default=None,
42                      help="'fixed'|'flexible'")
43    parser.add_option("--network-fault-model", action="store_true", default=False,
44                      help="enable network fault model: see src/mem/ruby/network/fault_model/")
45
46    # ruby mapping options
47    parser.add_option("--numa-high-bit", type="int", default=0,
48                      help="high order address bit to use for numa mapping. " \
49                           "0 = highest bit, not specified = lowest bit")
50
51    # ruby sparse memory options
52    parser.add_option("--use-map", action="store_true", default=False)
53    parser.add_option("--map-levels", type="int", default=4)
54
55    parser.add_option("--recycle-latency", type="int", default=10,
56                      help="Recycle latency for ruby controller input buffers")
57
58    parser.add_option("--random_seed", type="int", default=1234,
59                      help="Used for seeding the random number generator")
60
61    parser.add_option("--ruby_stats", type="string", default="ruby.stats")
62
63    protocol = buildEnv['PROTOCOL']
64    exec "import %s" % protocol
65    eval("%s.define_options(parser)" % protocol)
66
67def create_system(options, system, piobus = None, dma_devices = []):
68
69    system.ruby = RubySystem(clock = options.clock,
70                             stats_filename = options.ruby_stats)
71    ruby = system.ruby
72
73    protocol = buildEnv['PROTOCOL']
74    exec "import %s" % protocol
75    try:
76        (cpu_sequencers, dir_cntrls, all_cntrls) = \
77             eval("%s.create_system(options, system, piobus, \
78                                    dma_devices, ruby)" \
79                  % protocol)
80    except:
81        print "Error: could not create sytem for ruby protocol %s" % protocol
82        raise
83
84    #
85    # Set the network classes based on the command line options
86    #
87    if options.garnet_network == "fixed":
88        class NetworkClass(GarnetNetwork_d): pass
89        class IntLinkClass(GarnetIntLink_d): pass
90        class ExtLinkClass(GarnetExtLink_d): pass
91        class RouterClass(GarnetRouter_d): pass
92    elif options.garnet_network == "flexible":
93        class NetworkClass(GarnetNetwork): pass
94        class IntLinkClass(GarnetIntLink): pass
95        class ExtLinkClass(GarnetExtLink): pass
96        class RouterClass(GarnetRouter): pass
97    else:
98        class NetworkClass(SimpleNetwork): pass
99        class IntLinkClass(SimpleIntLink): pass
100        class ExtLinkClass(SimpleExtLink): pass
101        class RouterClass(BasicRouter): pass
102
103    #
104    # Important: the topology must be created before the network and after the
105    # controllers.
106    #
107    exec "import %s" % options.topology
108    try:
109        net_topology = eval("%s.makeTopology(all_cntrls, options, \
110                                             IntLinkClass, ExtLinkClass, \
111                                             RouterClass)" \
112                            % options.topology)
113    except:
114        print "Error: could not create topology %s" % options.topology
115        raise
116
117    if options.network_fault_model:
118        assert(options.garnet_network == "fixed")
119        fault_model = FaultModel()
120        network = NetworkClass(ruby_system = ruby, topology = net_topology,\
121                               enable_fault_model=True, fault_model = fault_model)
122    else:
123        network = NetworkClass(ruby_system = ruby, topology = net_topology)
124
125    #
126    # Loop through the directory controlers.
127    # Determine the total memory size of the ruby system and verify it is equal
128    # to physmem.  However, if Ruby memory is using sparse memory in SE
129    # mode, then the system should not back-up the memory state with
130    # the Memory Vector and thus the memory size bytes should stay at 0.
131    # Also set the numa bits to the appropriate values.
132    #
133    total_mem_size = MemorySize('0B')
134
135    dir_bits = int(math.log(options.num_dirs, 2))
136
137    if options.numa_high_bit:
138        numa_bit = options.numa_high_bit
139    else:
140        # if not specified, use the lowest bits above the block offest
141        if dir_bits > 0:
142            # add 5 because bits 0-5 are the block offset
143            numa_bit = dir_bits + 5
144        else:
145            numa_bit = 6
146
147    for dir_cntrl in dir_cntrls:
148        total_mem_size.value += dir_cntrl.directory.size.value
149        dir_cntrl.directory.numa_high_bit = numa_bit
150
151    physmem_size = long(system.physmem.range.second) - \
152                     long(system.physmem.range.first) + 1
153    assert(total_mem_size.value == physmem_size)
154
155    ruby_profiler = RubyProfiler(ruby_system = ruby,
156                                 num_of_sequencers = len(cpu_sequencers))
157    ruby_tracer   = RubyTracer(ruby_system = ruby)
158
159    ruby.network = network
160    ruby.profiler = ruby_profiler
161    ruby.tracer = ruby_tracer
162    ruby.mem_size = total_mem_size
163    ruby._cpu_ruby_ports = cpu_sequencers
164    ruby.random_seed    = options.random_seed
165