Ruby.py revision 10524:fff17530cef6 
1# Copyright (c) 2012 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2007 The Regents of The University of Michigan
14# Copyright (c) 2009 Advanced Micro Devices, Inc.
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Brad Beckmann
41
42import math
43import m5
44from m5.objects import *
45from m5.defines import buildEnv
46from m5.util import addToPath, fatal
47
48import MemConfig
49addToPath('../topologies')
50
51def define_options(parser):
52    # By default, ruby uses the simple timing cpu
53    parser.set_defaults(cpu_type="timing")
54
55    parser.add_option("--ruby-clock", action="store", type="string",
56                      default='2GHz',
57                      help="Clock for blocks running at Ruby system's speed")
58
59    # Options related to cache structure
60    parser.add_option("--ports", action="store", type="int", default=4,
61                      help="used of transitions per cycle which is a proxy \
62                            for the number of ports.")
63
64    # ruby network options
65    parser.add_option("--topology", type="string", default="Crossbar",
66                 help="check src/mem/ruby/network/topologies for complete set")
67    parser.add_option("--mesh-rows", type="int", default=1,
68                      help="the number of rows in the mesh topology")
69    parser.add_option("--garnet-network", type="choice",
70                      choices=['fixed', 'flexible'], help="'fixed'|'flexible'")
71    parser.add_option("--network-fault-model", action="store_true", default=False,
72                      help="enable network fault model: see src/mem/ruby/network/fault_model/")
73
74    # ruby mapping options
75    parser.add_option("--numa-high-bit", type="int", default=0,
76                      help="high order address bit to use for numa mapping. " \
77                           "0 = highest bit, not specified = lowest bit")
78
79    parser.add_option("--recycle-latency", type="int", default=10,
80                      help="Recycle latency for ruby controller input buffers")
81
82    parser.add_option("--random_seed", type="int", default=1234,
83                      help="Used for seeding the random number generator")
84
85    protocol = buildEnv['PROTOCOL']
86    exec "import %s" % protocol
87    eval("%s.define_options(parser)" % protocol)
88
89def setup_memory_controllers(system, ruby, dir_cntrls, options):
90    ruby.block_size_bytes = options.cacheline_size
91    ruby.memory_size_bits = 48
92    block_size_bits = int(math.log(options.cacheline_size, 2))
93
94    if options.numa_high_bit:
95        numa_bit = options.numa_high_bit
96    else:
97        # if the numa_bit is not specified, set the directory bits as the
98        # lowest bits above the block offset bits, and the numa_bit as the
99        # highest of those directory bits
100        dir_bits = int(math.log(options.num_dirs, 2))
101        numa_bit = block_size_bits + dir_bits - 1
102
103    index = 0
104    mem_ctrls = []
105    crossbars = []
106
107    # Sets bits to be used for interleaving.  Creates memory controllers
108    # attached to a directory controller.  A separate controller is created
109    # for each address range as the abstract memory can handle only one
110    # contiguous address range as of now.
111    for dir_cntrl in dir_cntrls:
112        dir_cntrl.directory.numa_high_bit = numa_bit
113
114        crossbar = None
115        if len(system.mem_ranges) > 1:
116            crossbar = NoncoherentXBar()
117            crossbars.append(crossbar)
118            dir_cntrl.memory = crossbar.slave
119
120        for r in system.mem_ranges:
121            mem_ctrl = MemConfig.create_mem_ctrl(
122                MemConfig.get(options.mem_type), r, index, options.num_dirs,
123                int(math.log(options.num_dirs, 2)), options.cacheline_size)
124
125            mem_ctrls.append(mem_ctrl)
126
127            if crossbar != None:
128                mem_ctrl.port = crossbar.master
129            else:
130                mem_ctrl.port = dir_cntrl.memory
131
132        index += 1
133
134    system.mem_ctrls = mem_ctrls
135
136    if len(crossbars) > 0:
137        ruby.crossbars = crossbars
138
139
140def create_topology(controllers, options):
141    """ Called from create_system in configs/ruby/<protocol>.py
142        Must return an object which is a subclass of BaseTopology
143        found in configs/topologies/BaseTopology.py
144        This is a wrapper for the legacy topologies.
145    """
146    exec "import %s as Topo" % options.topology
147    topology = eval("Topo.%s(controllers)" % options.topology)
148    return topology
149
150def create_system(options, full_system, system, piobus = None, dma_ports = []):
151
152    system.ruby = RubySystem()
153    ruby = system.ruby
154
155    # Set the network classes based on the command line options
156    if options.garnet_network == "fixed":
157        NetworkClass = GarnetNetwork_d
158        IntLinkClass = GarnetIntLink_d
159        ExtLinkClass = GarnetExtLink_d
160        RouterClass = GarnetRouter_d
161        InterfaceClass = GarnetNetworkInterface_d
162
163    elif options.garnet_network == "flexible":
164        NetworkClass = GarnetNetwork
165        IntLinkClass = GarnetIntLink
166        ExtLinkClass = GarnetExtLink
167        RouterClass = GarnetRouter
168        InterfaceClass = GarnetNetworkInterface
169
170    else:
171        NetworkClass = SimpleNetwork
172        IntLinkClass = SimpleIntLink
173        ExtLinkClass = SimpleExtLink
174        RouterClass = Switch
175        InterfaceClass = None
176
177    # Instantiate the network object so that the controllers can connect to it.
178    network = NetworkClass(ruby_system = ruby, topology = options.topology,
179            routers = [], ext_links = [], int_links = [], netifs = [])
180    ruby.network = network
181
182    protocol = buildEnv['PROTOCOL']
183    exec "import %s" % protocol
184    try:
185        (cpu_sequencers, dir_cntrls, topology) = \
186             eval("%s.create_system(options, full_system, system, dma_ports,\
187                                    ruby)"
188                  % protocol)
189    except:
190        print "Error: could not create sytem for ruby protocol %s" % protocol
191        raise
192
193    # Create a port proxy for connecting the system port. This is
194    # independent of the protocol and kept in the protocol-agnostic
195    # part (i.e. here).
196    sys_port_proxy = RubyPortProxy(ruby_system = ruby)
197
198    # Give the system port proxy a SimObject parent without creating a
199    # full-fledged controller
200    system.sys_port_proxy = sys_port_proxy
201
202    # Connect the system port for loading of binaries etc
203    system.system_port = system.sys_port_proxy.slave
204
205    # Create the network topology
206    topology.makeTopology(options, network, IntLinkClass, ExtLinkClass,
207            RouterClass)
208
209    if InterfaceClass != None:
210        netifs = [InterfaceClass(id=i) for (i,n) in enumerate(network.ext_links)]
211        network.netifs = netifs
212
213    if options.network_fault_model:
214        assert(options.garnet_network == "fixed")
215        network.enable_fault_model = True
216        network.fault_model = FaultModel()
217
218    setup_memory_controllers(system, ruby, dir_cntrls, options)
219
220    # Connect the cpu sequencers and the piobus
221    if piobus != None:
222        for cpu_seq in cpu_sequencers:
223            cpu_seq.pio_master_port = piobus.slave
224            cpu_seq.mem_master_port = piobus.slave
225
226            if buildEnv['TARGET_ISA'] == "x86":
227                cpu_seq.pio_slave_port = piobus.master
228
229    ruby._cpu_ports = cpu_sequencers
230    ruby.num_of_sequencers = len(cpu_sequencers)
231    ruby.random_seed    = options.random_seed
232