MOESI_CMP_directory.py revision 9841 
1# Copyright (c) 2006-2007 The Regents of The University of Michigan
2# Copyright (c) 2009 Advanced Micro Devices, Inc.
3# All rights reserved.
4#
5# Redistribution and use in source and binary forms, with or without
6# modification, are permitted provided that the following conditions are
7# met: redistributions of source code must retain the above copyright
8# notice, this list of conditions and the following disclaimer;
9# redistributions in binary form must reproduce the above copyright
10# notice, this list of conditions and the following disclaimer in the
11# documentation and/or other materials provided with the distribution;
12# neither the name of the copyright holders nor the names of its
13# contributors may be used to endorse or promote products derived from
14# this software without specific prior written permission.
15#
16# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27#
28# Authors: Brad Beckmann
29
30import math
31import m5
32from m5.objects import *
33from m5.defines import buildEnv
34from Ruby import create_topology
35
36#
37# Note: the L1 Cache latency is only used by the sequencer on fast path hits
38#
39class L1Cache(RubyCache):
40    latency = 3
41
42#
43# Note: the L2 Cache latency is not currently used
44#
45class L2Cache(RubyCache):
46    latency = 15
47
48def define_options(parser):
49    return
50
51def create_system(options, system, piobus, dma_ports, ruby_system):
52
53    if buildEnv['PROTOCOL'] != 'MOESI_CMP_directory':
54        panic("This script requires the MOESI_CMP_directory protocol to be built.")
55
56    cpu_sequencers = []
57
58    #
59    # The ruby network creation expects the list of nodes in the system to be
60    # consistent with the NetDest list.  Therefore the l1 controller nodes must be
61    # listed before the directory nodes and directory nodes before dma nodes, etc.
62    #
63    l1_cntrl_nodes = []
64    l2_cntrl_nodes = []
65    dir_cntrl_nodes = []
66    dma_cntrl_nodes = []
67
68    #
69    # Must create the individual controllers before the network to ensure the
70    # controller constructors are called before the network constructor
71    #
72    l2_bits = int(math.log(options.num_l2caches, 2))
73    block_size_bits = int(math.log(options.cacheline_size, 2))
74
75    cntrl_count = 0
76
77    for i in xrange(options.num_cpus):
78        #
79        # First create the Ruby objects associated with this cpu
80        #
81        l1i_cache = L1Cache(size = options.l1i_size,
82                            assoc = options.l1i_assoc,
83                            start_index_bit = block_size_bits,
84                            is_icache = True)
85        l1d_cache = L1Cache(size = options.l1d_size,
86                            assoc = options.l1d_assoc,
87                            start_index_bit = block_size_bits,
88                            is_icache = False)
89
90        l1_cntrl = L1Cache_Controller(version = i,
91                                      cntrl_id = cntrl_count,
92                                      L1Icache = l1i_cache,
93                                      L1Dcache = l1d_cache,
94                                      l2_select_num_bits = l2_bits,
95                                      send_evictions = (
96                                          options.cpu_type == "detailed"),
97                                      transitions_per_cycle = options.ports,
98                                      ruby_system = ruby_system)
99
100        cpu_seq = RubySequencer(version = i,
101                                icache = l1i_cache,
102                                dcache = l1d_cache,
103                                ruby_system = ruby_system)
104
105        l1_cntrl.sequencer = cpu_seq
106
107        if piobus != None:
108            cpu_seq.pio_port = piobus.slave
109
110        exec("ruby_system.l1_cntrl%d = l1_cntrl" % i)
111        #
112        # Add controllers and sequencers to the appropriate lists
113        #
114        cpu_sequencers.append(cpu_seq)
115        l1_cntrl_nodes.append(l1_cntrl)
116
117        cntrl_count += 1
118
119    l2_index_start = block_size_bits + l2_bits
120
121    for i in xrange(options.num_l2caches):
122        #
123        # First create the Ruby objects associated with this cpu
124        #
125        l2_cache = L2Cache(size = options.l2_size,
126                           assoc = options.l2_assoc,
127                           start_index_bit = l2_index_start)
128
129        l2_cntrl = L2Cache_Controller(version = i,
130                                      cntrl_id = cntrl_count,
131                                      L2cache = l2_cache,
132                                      transitions_per_cycle = options.ports,
133                                      ruby_system = ruby_system)
134
135        exec("ruby_system.l2_cntrl%d = l2_cntrl" % i)
136        l2_cntrl_nodes.append(l2_cntrl)
137
138        cntrl_count += 1
139
140    phys_mem_size = sum(map(lambda r: r.size(), system.mem_ranges))
141    assert(phys_mem_size % options.num_dirs == 0)
142    mem_module_size = phys_mem_size / options.num_dirs
143
144    # Run each of the ruby memory controllers at a ratio of the frequency of
145    # the ruby system.
146    # clk_divider value is a fix to pass regression.
147    ruby_system.memctrl_clk_domain = DerivedClockDomain(
148                                          clk_domain=ruby_system.clk_domain,
149                                          clk_divider=3)
150
151    for i in xrange(options.num_dirs):
152        #
153        # Create the Ruby objects associated with the directory controller
154        #
155
156        mem_cntrl = RubyMemoryControl(
157                              clk_domain = ruby_system.memctrl_clk_domain,
158                              version = i,
159                              ruby_system = ruby_system)
160
161        dir_size = MemorySize('0B')
162        dir_size.value = mem_module_size
163
164        dir_cntrl = Directory_Controller(version = i,
165                                         cntrl_id = cntrl_count,
166                                         directory = \
167                                         RubyDirectoryMemory(version = i,
168                                             size = dir_size,
169                                             use_map = options.use_map),
170                                         memBuffer = mem_cntrl,
171                                         transitions_per_cycle = options.ports,
172                                         ruby_system = ruby_system)
173
174        exec("ruby_system.dir_cntrl%d = dir_cntrl" % i)
175        dir_cntrl_nodes.append(dir_cntrl)
176
177        cntrl_count += 1
178
179    for i, dma_port in enumerate(dma_ports):
180        #
181        # Create the Ruby objects associated with the dma controller
182        #
183        dma_seq = DMASequencer(version = i,
184                               ruby_system = ruby_system)
185
186        dma_cntrl = DMA_Controller(version = i,
187                                   cntrl_id = cntrl_count,
188                                   dma_sequencer = dma_seq,
189                                   transitions_per_cycle = options.ports,
190                                   ruby_system = ruby_system)
191
192        exec("ruby_system.dma_cntrl%d = dma_cntrl" % i)
193        exec("ruby_system.dma_cntrl%d.dma_sequencer.slave = dma_port" % i)
194        dma_cntrl_nodes.append(dma_cntrl)
195        cntrl_count += 1
196
197    all_cntrls = l1_cntrl_nodes + \
198                 l2_cntrl_nodes + \
199                 dir_cntrl_nodes + \
200                 dma_cntrl_nodes
201
202    topology = create_topology(all_cntrls, options)
203
204    return (cpu_sequencers, dir_cntrl_nodes, topology)
205