SConstruct revision 5274:7888bf966443
1# -*- mode:python -*-
2
3# Copyright (c) 2004-2005 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30
31###################################################
32#
33# SCons top-level build description (SConstruct) file.
34#
35# While in this directory ('m5'), just type 'scons' to build the default
36# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
37# to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
38# the optimized full-system version).
39#
40# You can build M5 in a different directory as long as there is a
41# 'build/<CONFIG>' somewhere along the target path.  The build system
42# expects that all configs under the same build directory are being
43# built for the same host system.
44#
45# Examples:
46#
47#   The following two commands are equivalent.  The '-u' option tells
48#   scons to search up the directory tree for this SConstruct file.
49#   % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
50#   % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
51#
52#   The following two commands are equivalent and demonstrate building
53#   in a directory outside of the source tree.  The '-C' option tells
54#   scons to chdir to the specified directory to find this SConstruct
55#   file.
56#   % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
57#   % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
58#
59# You can use 'scons -H' to print scons options.  If you're in this
60# 'm5' directory (or use -u or -C to tell scons where to find this
61# file), you can use 'scons -h' to print all the M5-specific build
62# options as well.
63#
64###################################################
65
66import sys
67import os
68
69from os.path import isdir, join as joinpath
70
71import SCons
72
73# Check for recent-enough Python and SCons versions.  If your system's
74# default installation of Python is not recent enough, you can use a
75# non-default installation of the Python interpreter by either (1)
76# rearranging your PATH so that scons finds the non-default 'python'
77# first or (2) explicitly invoking an alternative interpreter on the
78# scons script, e.g., "/usr/local/bin/python2.4 `which scons` [args]".
79EnsurePythonVersion(2,4)
80
81# Import subprocess after we check the version since it doesn't exist in
82# Python < 2.4.
83import subprocess
84
85# Ironically, SCons 0.96 dies if you give EnsureSconsVersion a
86# 3-element version number.
87min_scons_version = (0,96,91)
88try:
89    EnsureSConsVersion(*min_scons_version)
90except:
91    print "Error checking current SCons version."
92    print "SCons", ".".join(map(str,min_scons_version)), "or greater required."
93    Exit(2)
94
95
96# The absolute path to the current directory (where this file lives).
97ROOT = Dir('.').abspath
98
99# Path to the M5 source tree.
100SRCDIR = joinpath(ROOT, 'src')
101
102# tell python where to find m5 python code
103sys.path.append(joinpath(ROOT, 'src/python'))
104
105def check_style_hook(ui):
106    ui.readconfig(joinpath(ROOT, '.hg', 'hgrc'))
107    style_hook = ui.config('hooks', 'pretxncommit.style', None)
108
109    if not style_hook:
110        print """\
111You're missing the M5 style hook.
112Please install the hook so we can ensure that all code fits a common style.
113
114All you'd need to do is add the following lines to your repository .hg/hgrc
115or your personal .hgrc
116----------------
117
118[extensions]
119style = %s/util/style.py
120
121[hooks]
122pretxncommit.style = python:style.check_whitespace
123""" % (ROOT)
124        sys.exit(1)
125
126if ARGUMENTS.get('IGNORE_STYLE') != 'True' and isdir(joinpath(ROOT, '.hg')):
127    try:
128        from mercurial import ui
129        check_style_hook(ui.ui())
130    except ImportError:
131        pass
132
133###################################################
134#
135# Figure out which configurations to set up based on the path(s) of
136# the target(s).
137#
138###################################################
139
140# Find default configuration & binary.
141Default(os.environ.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
142
143# helper function: find last occurrence of element in list
144def rfind(l, elt, offs = -1):
145    for i in range(len(l)+offs, 0, -1):
146        if l[i] == elt:
147            return i
148    raise ValueError, "element not found"
149
150# helper function: compare dotted version numbers.
151# E.g., compare_version('1.3.25', '1.4.1')
152# returns -1, 0, 1 if v1 is <, ==, > v2
153def compare_versions(v1, v2):
154    # Convert dotted strings to lists
155    v1 = map(int, v1.split('.'))
156    v2 = map(int, v2.split('.'))
157    # Compare corresponding elements of lists
158    for n1,n2 in zip(v1, v2):
159        if n1 < n2: return -1
160        if n1 > n2: return  1
161    # all corresponding values are equal... see if one has extra values
162    if len(v1) < len(v2): return -1
163    if len(v1) > len(v2): return  1
164    return 0
165
166# Each target must have 'build' in the interior of the path; the
167# directory below this will determine the build parameters.  For
168# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
169# recognize that ALPHA_SE specifies the configuration because it
170# follow 'build' in the bulid path.
171
172# Generate absolute paths to targets so we can see where the build dir is
173if COMMAND_LINE_TARGETS:
174    # Ask SCons which directory it was invoked from
175    launch_dir = GetLaunchDir()
176    # Make targets relative to invocation directory
177    abs_targets = map(lambda x: os.path.normpath(joinpath(launch_dir, str(x))),
178                      COMMAND_LINE_TARGETS)
179else:
180    # Default targets are relative to root of tree
181    abs_targets = map(lambda x: os.path.normpath(joinpath(ROOT, str(x))),
182                      DEFAULT_TARGETS)
183
184
185# Generate a list of the unique build roots and configs that the
186# collected targets reference.
187build_paths = []
188build_root = None
189for t in abs_targets:
190    path_dirs = t.split('/')
191    try:
192        build_top = rfind(path_dirs, 'build', -2)
193    except:
194        print "Error: no non-leaf 'build' dir found on target path", t
195        Exit(1)
196    this_build_root = joinpath('/',*path_dirs[:build_top+1])
197    if not build_root:
198        build_root = this_build_root
199    else:
200        if this_build_root != build_root:
201            print "Error: build targets not under same build root\n"\
202                  "  %s\n  %s" % (build_root, this_build_root)
203            Exit(1)
204    build_path = joinpath('/',*path_dirs[:build_top+2])
205    if build_path not in build_paths:
206        build_paths.append(build_path)
207
208###################################################
209#
210# Set up the default build environment.  This environment is copied
211# and modified according to each selected configuration.
212#
213###################################################
214
215env = Environment(ENV = os.environ,  # inherit user's environment vars
216                  ROOT = ROOT,
217                  SRCDIR = SRCDIR)
218
219#Parse CC/CXX early so that we use the correct compiler for
220# to test for dependencies/versions/libraries/includes
221if ARGUMENTS.get('CC', None):
222    env['CC'] = ARGUMENTS.get('CC')
223
224if ARGUMENTS.get('CXX', None):
225    env['CXX'] = ARGUMENTS.get('CXX')
226
227Export('env')
228
229env.SConsignFile(joinpath(build_root,"sconsign"))
230
231# Default duplicate option is to use hard links, but this messes up
232# when you use emacs to edit a file in the target dir, as emacs moves
233# file to file~ then copies to file, breaking the link.  Symbolic
234# (soft) links work better.
235env.SetOption('duplicate', 'soft-copy')
236
237# I waffle on this setting... it does avoid a few painful but
238# unnecessary builds, but it also seems to make trivial builds take
239# noticeably longer.
240if False:
241    env.TargetSignatures('content')
242
243# M5_PLY is used by isa_parser.py to find the PLY package.
244env.Append(ENV = { 'M5_PLY' : str(Dir('ext/ply')) })
245env['GCC'] = False
246env['SUNCC'] = False
247env['ICC'] = False
248env['GCC'] = subprocess.Popen(env['CXX'] + ' --version', shell=True,
249        stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
250        close_fds=True).communicate()[0].find('GCC') >= 0
251env['SUNCC'] = subprocess.Popen(env['CXX'] + ' -V', shell=True,
252        stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
253        close_fds=True).communicate()[0].find('Sun C++') >= 0
254env['ICC'] = subprocess.Popen(env['CXX'] + ' -V', shell=True,
255        stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
256        close_fds=True).communicate()[0].find('Intel') >= 0
257if env['GCC'] + env['SUNCC'] + env['ICC'] > 1:
258    print 'Error: How can we have two at the same time?'
259    Exit(1)
260
261
262# Set up default C++ compiler flags
263if env['GCC']:
264    env.Append(CCFLAGS='-pipe')
265    env.Append(CCFLAGS='-fno-strict-aliasing')
266    env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
267elif env['ICC']:
268    pass #Fix me... add warning flags once we clean up icc warnings
269elif env['SUNCC']:
270    env.Append(CCFLAGS='-Qoption ccfe')
271    env.Append(CCFLAGS='-features=gcc')
272    env.Append(CCFLAGS='-features=extensions')
273    env.Append(CCFLAGS='-library=stlport4')
274    env.Append(CCFLAGS='-xar')
275#    env.Append(CCFLAGS='-instances=semiexplicit')
276else:
277    print 'Error: Don\'t know what compiler options to use for your compiler.'
278    print '       Please fix SConstruct and src/SConscript and try again.'
279    Exit(1)
280
281if sys.platform == 'cygwin':
282    # cygwin has some header file issues...
283    env.Append(CCFLAGS=Split("-Wno-uninitialized"))
284env.Append(CPPPATH=[Dir('ext/dnet')])
285
286# Check for SWIG
287if not env.has_key('SWIG'):
288    print 'Error: SWIG utility not found.'
289    print '       Please install (see http://www.swig.org) and retry.'
290    Exit(1)
291
292# Check for appropriate SWIG version
293swig_version = os.popen('swig -version').read().split()
294# First 3 words should be "SWIG Version x.y.z"
295if len(swig_version) < 3 or \
296        swig_version[0] != 'SWIG' or swig_version[1] != 'Version':
297    print 'Error determining SWIG version.'
298    Exit(1)
299
300min_swig_version = '1.3.28'
301if compare_versions(swig_version[2], min_swig_version) < 0:
302    print 'Error: SWIG version', min_swig_version, 'or newer required.'
303    print '       Installed version:', swig_version[2]
304    Exit(1)
305
306# Set up SWIG flags & scanner
307swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS')
308env.Append(SWIGFLAGS=swig_flags)
309
310# filter out all existing swig scanners, they mess up the dependency
311# stuff for some reason
312scanners = []
313for scanner in env['SCANNERS']:
314    skeys = scanner.skeys
315    if skeys == '.i':
316        continue
317
318    if isinstance(skeys, (list, tuple)) and '.i' in skeys:
319        continue
320
321    scanners.append(scanner)
322
323# add the new swig scanner that we like better
324from SCons.Scanner import ClassicCPP as CPPScanner
325swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
326scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re))
327
328# replace the scanners list that has what we want
329env['SCANNERS'] = scanners
330
331# Platform-specific configuration.  Note again that we assume that all
332# builds under a given build root run on the same host platform.
333conf = Configure(env,
334                 conf_dir = joinpath(build_root, '.scons_config'),
335                 log_file = joinpath(build_root, 'scons_config.log'))
336
337# Check if we should compile a 64 bit binary on Mac OS X/Darwin
338try:
339    import platform
340    uname = platform.uname()
341    if uname[0] == 'Darwin' and compare_versions(uname[2], '9.0.0') >= 0:
342        if int(subprocess.Popen('sysctl -n hw.cpu64bit_capable', shell=True,
343               stdout=subprocess.PIPE, stderr=subprocess.STDOUT,
344               close_fds=True).communicate()[0][0]):
345            env.Append(CCFLAGS='-arch x86_64')
346            env.Append(CFLAGS='-arch x86_64')
347            env.Append(LINKFLAGS='-arch x86_64')
348            env.Append(ASFLAGS='-arch x86_64')
349            env['OSX64bit'] = True
350except:
351    pass
352
353# Recent versions of scons substitute a "Null" object for Configure()
354# when configuration isn't necessary, e.g., if the "--help" option is
355# present.  Unfortuantely this Null object always returns false,
356# breaking all our configuration checks.  We replace it with our own
357# more optimistic null object that returns True instead.
358if not conf:
359    def NullCheck(*args, **kwargs):
360        return True
361
362    class NullConf:
363        def __init__(self, env):
364            self.env = env
365        def Finish(self):
366            return self.env
367        def __getattr__(self, mname):
368            return NullCheck
369
370    conf = NullConf(env)
371
372# Find Python include and library directories for embedding the
373# interpreter.  For consistency, we will use the same Python
374# installation used to run scons (and thus this script).  If you want
375# to link in an alternate version, see above for instructions on how
376# to invoke scons with a different copy of the Python interpreter.
377
378# Get brief Python version name (e.g., "python2.4") for locating
379# include & library files
380py_version_name = 'python' + sys.version[:3]
381
382# include path, e.g. /usr/local/include/python2.4
383py_header_path = joinpath(sys.exec_prefix, 'include', py_version_name)
384env.Append(CPPPATH = py_header_path)
385# verify that it works
386if not conf.CheckHeader('Python.h', '<>'):
387    print "Error: can't find Python.h header in", py_header_path
388    Exit(1)
389
390# add library path too if it's not in the default place
391py_lib_path = None
392if sys.exec_prefix != '/usr':
393    py_lib_path = joinpath(sys.exec_prefix, 'lib')
394elif sys.platform == 'cygwin':
395    # cygwin puts the .dll in /bin for some reason
396    py_lib_path = '/bin'
397if py_lib_path:
398    env.Append(LIBPATH = py_lib_path)
399    print 'Adding', py_lib_path, 'to LIBPATH for', py_version_name
400if not conf.CheckLib(py_version_name):
401    print "Error: can't find Python library", py_version_name
402    Exit(1)
403
404# On Solaris you need to use libsocket for socket ops
405if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
406   if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
407       print "Can't find library with socket calls (e.g. accept())"
408       Exit(1)
409
410# Check for zlib.  If the check passes, libz will be automatically
411# added to the LIBS environment variable.
412if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
413    print 'Error: did not find needed zlib compression library '\
414          'and/or zlib.h header file.'
415    print '       Please install zlib and try again.'
416    Exit(1)
417
418# Check for <fenv.h> (C99 FP environment control)
419have_fenv = conf.CheckHeader('fenv.h', '<>')
420if not have_fenv:
421    print "Warning: Header file <fenv.h> not found."
422    print "         This host has no IEEE FP rounding mode control."
423
424# Check for mysql.
425mysql_config = WhereIs('mysql_config')
426have_mysql = mysql_config != None
427
428# Check MySQL version.
429if have_mysql:
430    mysql_version = os.popen(mysql_config + ' --version').read()
431    min_mysql_version = '4.1'
432    if compare_versions(mysql_version, min_mysql_version) < 0:
433        print 'Warning: MySQL', min_mysql_version, 'or newer required.'
434        print '         Version', mysql_version, 'detected.'
435        have_mysql = False
436
437# Set up mysql_config commands.
438if have_mysql:
439    mysql_config_include = mysql_config + ' --include'
440    if os.system(mysql_config_include + ' > /dev/null') != 0:
441        # older mysql_config versions don't support --include, use
442        # --cflags instead
443        mysql_config_include = mysql_config + ' --cflags | sed s/\\\'//g'
444    # This seems to work in all versions
445    mysql_config_libs = mysql_config + ' --libs'
446
447env = conf.Finish()
448
449# Define the universe of supported ISAs
450all_isa_list = [ ]
451Export('all_isa_list')
452
453# Define the universe of supported CPU models
454all_cpu_list = [ ]
455default_cpus = [ ]
456Export('all_cpu_list', 'default_cpus')
457
458# Sticky options get saved in the options file so they persist from
459# one invocation to the next (unless overridden, in which case the new
460# value becomes sticky).
461sticky_opts = Options(args=ARGUMENTS)
462Export('sticky_opts')
463
464# Non-sticky options only apply to the current build.
465nonsticky_opts = Options(args=ARGUMENTS)
466Export('nonsticky_opts')
467
468# Walk the tree and execute all SConsopts scripts that wil add to the
469# above options
470for root, dirs, files in os.walk('.'):
471    if 'SConsopts' in files:
472        SConscript(os.path.join(root, 'SConsopts'))
473
474all_isa_list.sort()
475all_cpu_list.sort()
476default_cpus.sort()
477
478def PathListMakeAbsolute(val):
479    if not val:
480        return val
481    f = lambda p: os.path.abspath(os.path.expanduser(p))
482    return ':'.join(map(f, val.split(':')))
483
484def PathListAllExist(key, val, env):
485    if not val:
486        return
487    paths = val.split(':')
488    for path in paths:
489        if not isdir(path):
490            raise SCons.Errors.UserError("Path does not exist: '%s'" % path)
491
492sticky_opts.AddOptions(
493    EnumOption('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list),
494    BoolOption('FULL_SYSTEM', 'Full-system support', False),
495    # There's a bug in scons 0.96.1 that causes ListOptions with list
496    # values (more than one value) not to be able to be restored from
497    # a saved option file.  If this causes trouble then upgrade to
498    # scons 0.96.90 or later.
499    ListOption('CPU_MODELS', 'CPU models', default_cpus, all_cpu_list),
500    BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False),
501    BoolOption('EFENCE', 'Link with Electric Fence malloc debugger',
502               False),
503    BoolOption('SS_COMPATIBLE_FP',
504               'Make floating-point results compatible with SimpleScalar',
505               False),
506    BoolOption('USE_SSE2',
507               'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
508               False),
509    BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql),
510    BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
511    BoolOption('USE_CHECKER', 'Use checker for detailed CPU models', False),
512    ('CC', 'C compiler', os.environ.get('CC', env['CC'])),
513    ('CXX', 'C++ compiler', os.environ.get('CXX', env['CXX'])),
514    BoolOption('BATCH', 'Use batch pool for build and tests', False),
515    ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
516    ('PYTHONHOME',
517     'Override the default PYTHONHOME for this system (use with caution)',
518     '%s:%s' % (sys.prefix, sys.exec_prefix)),
519    ('EXTRAS', 'Add Extra directories to the compilation', '',
520     PathListAllExist, PathListMakeAbsolute)
521    )
522
523nonsticky_opts.AddOptions(
524    BoolOption('update_ref', 'Update test reference outputs', False)
525    )
526
527# These options get exported to #defines in config/*.hh (see src/SConscript).
528env.ExportOptions = ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \
529                     'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \
530                     'USE_CHECKER', 'PYTHONHOME', 'TARGET_ISA']
531
532# Define a handy 'no-op' action
533def no_action(target, source, env):
534    return 0
535
536env.NoAction = Action(no_action, None)
537
538###################################################
539#
540# Define a SCons builder for configuration flag headers.
541#
542###################################################
543
544# This function generates a config header file that #defines the
545# option symbol to the current option setting (0 or 1).  The source
546# operands are the name of the option and a Value node containing the
547# value of the option.
548def build_config_file(target, source, env):
549    (option, value) = [s.get_contents() for s in source]
550    f = file(str(target[0]), 'w')
551    print >> f, '#define', option, value
552    f.close()
553    return None
554
555# Generate the message to be printed when building the config file.
556def build_config_file_string(target, source, env):
557    (option, value) = [s.get_contents() for s in source]
558    return "Defining %s as %s in %s." % (option, value, target[0])
559
560# Combine the two functions into a scons Action object.
561config_action = Action(build_config_file, build_config_file_string)
562
563# The emitter munges the source & target node lists to reflect what
564# we're really doing.
565def config_emitter(target, source, env):
566    # extract option name from Builder arg
567    option = str(target[0])
568    # True target is config header file
569    target = joinpath('config', option.lower() + '.hh')
570    val = env[option]
571    if isinstance(val, bool):
572        # Force value to 0/1
573        val = int(val)
574    elif isinstance(val, str):
575        val = '"' + val + '"'
576
577    # Sources are option name & value (packaged in SCons Value nodes)
578    return ([target], [Value(option), Value(val)])
579
580config_builder = Builder(emitter = config_emitter, action = config_action)
581
582env.Append(BUILDERS = { 'ConfigFile' : config_builder })
583
584###################################################
585#
586# Define a SCons builder for copying files.  This is used by the
587# Python zipfile code in src/python/SConscript, but is placed up here
588# since it's potentially more generally applicable.
589#
590###################################################
591
592copy_builder = Builder(action = Copy("$TARGET", "$SOURCE"))
593
594env.Append(BUILDERS = { 'CopyFile' : copy_builder })
595
596###################################################
597#
598# Define a simple SCons builder to concatenate files.
599#
600# Used to append the Python zip archive to the executable.
601#
602###################################################
603
604concat_builder = Builder(action = Action(['cat $SOURCES > $TARGET',
605                                          'chmod +x $TARGET']))
606
607env.Append(BUILDERS = { 'Concat' : concat_builder })
608
609
610# base help text
611help_text = '''
612Usage: scons [scons options] [build options] [target(s)]
613
614'''
615
616# libelf build is shared across all configs in the build root.
617env.SConscript('ext/libelf/SConscript',
618               build_dir = joinpath(build_root, 'libelf'),
619               exports = 'env')
620
621###################################################
622#
623# This function is used to set up a directory with switching headers
624#
625###################################################
626
627env['ALL_ISA_LIST'] = all_isa_list
628def make_switching_dir(dirname, switch_headers, env):
629    # Generate the header.  target[0] is the full path of the output
630    # header to generate.  'source' is a dummy variable, since we get the
631    # list of ISAs from env['ALL_ISA_LIST'].
632    def gen_switch_hdr(target, source, env):
633        fname = str(target[0])
634        basename = os.path.basename(fname)
635        f = open(fname, 'w')
636        f.write('#include "arch/isa_specific.hh"\n')
637        cond = '#if'
638        for isa in all_isa_list:
639            f.write('%s THE_ISA == %s_ISA\n#include "%s/%s/%s"\n'
640                    % (cond, isa.upper(), dirname, isa, basename))
641            cond = '#elif'
642        f.write('#else\n#error "THE_ISA not set"\n#endif\n')
643        f.close()
644        return 0
645
646    # String to print when generating header
647    def gen_switch_hdr_string(target, source, env):
648        return "Generating switch header " + str(target[0])
649
650    # Build SCons Action object. 'varlist' specifies env vars that this
651    # action depends on; when env['ALL_ISA_LIST'] changes these actions
652    # should get re-executed.
653    switch_hdr_action = Action(gen_switch_hdr, gen_switch_hdr_string,
654                               varlist=['ALL_ISA_LIST'])
655
656    # Instantiate actions for each header
657    for hdr in switch_headers:
658        env.Command(hdr, [], switch_hdr_action)
659Export('make_switching_dir')
660
661###################################################
662#
663# Define build environments for selected configurations.
664#
665###################################################
666
667# rename base env
668base_env = env
669
670for build_path in build_paths:
671    print "Building in", build_path
672    env['BUILDDIR'] = build_path
673
674    # build_dir is the tail component of build path, and is used to
675    # determine the build parameters (e.g., 'ALPHA_SE')
676    (build_root, build_dir) = os.path.split(build_path)
677    # Make a copy of the build-root environment to use for this config.
678    env = base_env.Copy()
679
680    # Set env options according to the build directory config.
681    sticky_opts.files = []
682    # Options for $BUILD_ROOT/$BUILD_DIR are stored in
683    # $BUILD_ROOT/options/$BUILD_DIR so you can nuke
684    # $BUILD_ROOT/$BUILD_DIR without losing your options settings.
685    current_opts_file = joinpath(build_root, 'options', build_dir)
686    if os.path.isfile(current_opts_file):
687        sticky_opts.files.append(current_opts_file)
688        print "Using saved options file %s" % current_opts_file
689    else:
690        # Build dir-specific options file doesn't exist.
691
692        # Make sure the directory is there so we can create it later
693        opt_dir = os.path.dirname(current_opts_file)
694        if not os.path.isdir(opt_dir):
695            os.mkdir(opt_dir)
696
697        # Get default build options from source tree.  Options are
698        # normally determined by name of $BUILD_DIR, but can be
699        # overriden by 'default=' arg on command line.
700        default_opts_file = joinpath('build_opts',
701                                     ARGUMENTS.get('default', build_dir))
702        if os.path.isfile(default_opts_file):
703            sticky_opts.files.append(default_opts_file)
704            print "Options file %s not found,\n  using defaults in %s" \
705                  % (current_opts_file, default_opts_file)
706        else:
707            print "Error: cannot find options file %s or %s" \
708                  % (current_opts_file, default_opts_file)
709            Exit(1)
710
711    # Apply current option settings to env
712    sticky_opts.Update(env)
713    nonsticky_opts.Update(env)
714
715    help_text += "Sticky options for %s:\n" % build_dir \
716                 + sticky_opts.GenerateHelpText(env) \
717                 + "\nNon-sticky options for %s:\n" % build_dir \
718                 + nonsticky_opts.GenerateHelpText(env)
719
720    # Process option settings.
721
722    if not have_fenv and env['USE_FENV']:
723        print "Warning: <fenv.h> not available; " \
724              "forcing USE_FENV to False in", build_dir + "."
725        env['USE_FENV'] = False
726
727    if not env['USE_FENV']:
728        print "Warning: No IEEE FP rounding mode control in", build_dir + "."
729        print "         FP results may deviate slightly from other platforms."
730
731    if env['EFENCE']:
732        env.Append(LIBS=['efence'])
733
734    if env['USE_MYSQL']:
735        if not have_mysql:
736            print "Warning: MySQL not available; " \
737                  "forcing USE_MYSQL to False in", build_dir + "."
738            env['USE_MYSQL'] = False
739        else:
740            print "Compiling in", build_dir, "with MySQL support."
741            env.ParseConfig(mysql_config_libs)
742            env.ParseConfig(mysql_config_include)
743
744    # Save sticky option settings back to current options file
745    sticky_opts.Save(current_opts_file, env)
746
747    # Do this after we save setting back, or else we'll tack on an
748    # extra 'qdo' every time we run scons.
749    if env['BATCH']:
750        env['CC']  = env['BATCH_CMD'] + ' ' + env['CC']
751        env['CXX'] = env['BATCH_CMD'] + ' ' + env['CXX']
752
753    if env['USE_SSE2']:
754        env.Append(CCFLAGS='-msse2')
755
756    # The src/SConscript file sets up the build rules in 'env' according
757    # to the configured options.  It returns a list of environments,
758    # one for each variant build (debug, opt, etc.)
759    envList = SConscript('src/SConscript', build_dir = build_path,
760                         exports = 'env')
761
762    # Set up the regression tests for each build.
763    for e in envList:
764        SConscript('tests/SConscript',
765                   build_dir = joinpath(build_path, 'tests', e.Label),
766                   exports = { 'env' : e }, duplicate = False)
767
768Help(help_text)
769
770
771###################################################
772#
773# Let SCons do its thing.  At this point SCons will use the defined
774# build environments to build the requested targets.
775#
776###################################################
777
778