SConstruct revision 4494:b7c909b5a5e9
1# -*- mode:python -*-
2
3# Copyright (c) 2004-2005 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30
31###################################################
32#
33# SCons top-level build description (SConstruct) file.
34#
35# While in this directory ('m5'), just type 'scons' to build the default
36# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
37# to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
38# the optimized full-system version).
39#
40# You can build M5 in a different directory as long as there is a
41# 'build/<CONFIG>' somewhere along the target path.  The build system
42# expects that all configs under the same build directory are being
43# built for the same host system.
44#
45# Examples:
46#
47#   The following two commands are equivalent.  The '-u' option tells
48#   scons to search up the directory tree for this SConstruct file.
49#   % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
50#   % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
51#
52#   The following two commands are equivalent and demonstrate building
53#   in a directory outside of the source tree.  The '-C' option tells
54#   scons to chdir to the specified directory to find this SConstruct
55#   file.
56#   % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
57#   % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
58#
59# You can use 'scons -H' to print scons options.  If you're in this
60# 'm5' directory (or use -u or -C to tell scons where to find this
61# file), you can use 'scons -h' to print all the M5-specific build
62# options as well.
63#
64###################################################
65
66import sys
67import os
68import subprocess
69
70from os.path import join as joinpath
71
72# Check for recent-enough Python and SCons versions.  If your system's
73# default installation of Python is not recent enough, you can use a
74# non-default installation of the Python interpreter by either (1)
75# rearranging your PATH so that scons finds the non-default 'python'
76# first or (2) explicitly invoking an alternative interpreter on the
77# scons script, e.g., "/usr/local/bin/python2.4 `which scons` [args]".
78EnsurePythonVersion(2,4)
79
80# Ironically, SCons 0.96 dies if you give EnsureSconsVersion a
81# 3-element version number.
82min_scons_version = (0,96,91)
83try:
84    EnsureSConsVersion(*min_scons_version)
85except:
86    print "Error checking current SCons version."
87    print "SCons", ".".join(map(str,min_scons_version)), "or greater required."
88    Exit(2)
89    
90
91# The absolute path to the current directory (where this file lives).
92ROOT = Dir('.').abspath
93
94# Path to the M5 source tree.
95SRCDIR = joinpath(ROOT, 'src')
96
97# tell python where to find m5 python code
98sys.path.append(joinpath(ROOT, 'src/python'))
99
100###################################################
101#
102# Figure out which configurations to set up based on the path(s) of
103# the target(s).
104#
105###################################################
106
107# Find default configuration & binary.
108Default(os.environ.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
109
110# helper function: find last occurrence of element in list
111def rfind(l, elt, offs = -1):
112    for i in range(len(l)+offs, 0, -1):
113        if l[i] == elt:
114            return i
115    raise ValueError, "element not found"
116
117# helper function: compare dotted version numbers.
118# E.g., compare_version('1.3.25', '1.4.1')
119# returns -1, 0, 1 if v1 is <, ==, > v2
120def compare_versions(v1, v2):
121    # Convert dotted strings to lists
122    v1 = map(int, v1.split('.'))
123    v2 = map(int, v2.split('.'))
124    # Compare corresponding elements of lists
125    for n1,n2 in zip(v1, v2):
126        if n1 < n2: return -1
127        if n1 > n2: return  1
128    # all corresponding values are equal... see if one has extra values
129    if len(v1) < len(v2): return -1
130    if len(v1) > len(v2): return  1
131    return 0
132
133# Each target must have 'build' in the interior of the path; the
134# directory below this will determine the build parameters.  For
135# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
136# recognize that ALPHA_SE specifies the configuration because it
137# follow 'build' in the bulid path.
138
139# Generate absolute paths to targets so we can see where the build dir is
140if COMMAND_LINE_TARGETS:
141    # Ask SCons which directory it was invoked from
142    launch_dir = GetLaunchDir()
143    # Make targets relative to invocation directory
144    abs_targets = map(lambda x: os.path.normpath(joinpath(launch_dir, str(x))),
145                      COMMAND_LINE_TARGETS)
146else:
147    # Default targets are relative to root of tree
148    abs_targets = map(lambda x: os.path.normpath(joinpath(ROOT, str(x))),
149                      DEFAULT_TARGETS)
150
151
152# Generate a list of the unique build roots and configs that the
153# collected targets reference.
154build_paths = []
155build_root = None
156for t in abs_targets:
157    path_dirs = t.split('/')
158    try:
159        build_top = rfind(path_dirs, 'build', -2)
160    except:
161        print "Error: no non-leaf 'build' dir found on target path", t
162        Exit(1)
163    this_build_root = joinpath('/',*path_dirs[:build_top+1])
164    if not build_root:
165        build_root = this_build_root
166    else:
167        if this_build_root != build_root:
168            print "Error: build targets not under same build root\n"\
169                  "  %s\n  %s" % (build_root, this_build_root)
170            Exit(1)
171    build_path = joinpath('/',*path_dirs[:build_top+2])
172    if build_path not in build_paths:
173        build_paths.append(build_path)
174
175###################################################
176#
177# Set up the default build environment.  This environment is copied
178# and modified according to each selected configuration.
179#
180###################################################
181
182env = Environment(ENV = os.environ,  # inherit user's environment vars
183                  ROOT = ROOT,
184                  SRCDIR = SRCDIR)
185
186#Parse CC/CXX early so that we use the correct compiler for 
187# to test for dependencies/versions/libraries/includes
188if ARGUMENTS.get('CC', None):
189    env['CC'] = ARGUMENTS.get('CC')
190
191if ARGUMENTS.get('CXX', None):
192    env['CXX'] = ARGUMENTS.get('CXX')
193
194Export('env')
195
196env.SConsignFile(joinpath(build_root,"sconsign"))
197
198# Default duplicate option is to use hard links, but this messes up
199# when you use emacs to edit a file in the target dir, as emacs moves
200# file to file~ then copies to file, breaking the link.  Symbolic
201# (soft) links work better.
202env.SetOption('duplicate', 'soft-copy')
203
204# I waffle on this setting... it does avoid a few painful but
205# unnecessary builds, but it also seems to make trivial builds take
206# noticeably longer.
207if False:
208    env.TargetSignatures('content')
209
210# M5_PLY is used by isa_parser.py to find the PLY package.
211env.Append(ENV = { 'M5_PLY' : Dir('ext/ply') })
212env['GCC'] = False
213env['SUNCC'] = False
214env['ICC'] = False
215env['GCC'] = subprocess.Popen(env['CXX'] + ' --version', shell=True, 
216        stdout=subprocess.PIPE, stderr=subprocess.STDOUT, 
217        close_fds=True).communicate()[0].find('GCC') >= 0
218env['SUNCC'] = subprocess.Popen(env['CXX'] + ' -V', shell=True, 
219        stdout=subprocess.PIPE, stderr=subprocess.STDOUT, 
220        close_fds=True).communicate()[0].find('Sun C++') >= 0
221env['ICC'] = subprocess.Popen(env['CXX'] + ' -V', shell=True, 
222        stdout=subprocess.PIPE, stderr=subprocess.STDOUT, 
223        close_fds=True).communicate()[0].find('Intel') >= 0
224if env['GCC'] + env['SUNCC'] + env['ICC'] > 1:
225    print 'Error: How can we have two at the same time?'
226    Exit(1)
227
228
229# Set up default C++ compiler flags
230if env['GCC']:
231    env.Append(CCFLAGS='-pipe')
232    env.Append(CCFLAGS='-fno-strict-aliasing')
233    env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
234elif env['ICC']:
235    pass #Fix me... add warning flags once we clean up icc warnings
236elif env['SUNCC']:
237    env.Append(CCFLAGS='-Qoption ccfe')
238    env.Append(CCFLAGS='-features=gcc')
239    env.Append(CCFLAGS='-features=extensions')
240    env.Append(CCFLAGS='-library=stlport4')
241    env.Append(CCFLAGS='-xar')
242#    env.Append(CCFLAGS='-instances=semiexplicit')
243else:
244    print 'Error: Don\'t know what compiler options to use for your compiler.'
245    print '       Please fix SConstruct and src/SConscript and try again.'
246    Exit(1)
247
248if sys.platform == 'cygwin':
249    # cygwin has some header file issues...
250    env.Append(CCFLAGS=Split("-Wno-uninitialized"))
251env.Append(CPPPATH=[Dir('ext/dnet')])
252
253# Check for SWIG
254if not env.has_key('SWIG'):
255    print 'Error: SWIG utility not found.'
256    print '       Please install (see http://www.swig.org) and retry.'
257    Exit(1)
258
259# Check for appropriate SWIG version
260swig_version = os.popen('swig -version').read().split()
261# First 3 words should be "SWIG Version x.y.z"
262if swig_version[0] != 'SWIG' or swig_version[1] != 'Version':
263    print 'Error determining SWIG version.'
264    Exit(1)
265
266min_swig_version = '1.3.28'
267if compare_versions(swig_version[2], min_swig_version) < 0:
268    print 'Error: SWIG version', min_swig_version, 'or newer required.'
269    print '       Installed version:', swig_version[2]
270    Exit(1)
271
272# Set up SWIG flags & scanner
273env.Append(SWIGFLAGS=Split('-c++ -python -modern $_CPPINCFLAGS'))
274
275import SCons.Scanner
276
277swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
278
279swig_scanner = SCons.Scanner.ClassicCPP("SwigScan", ".i", "CPPPATH",
280                                        swig_inc_re)
281
282env.Append(SCANNERS = swig_scanner)
283
284# Platform-specific configuration.  Note again that we assume that all
285# builds under a given build root run on the same host platform.
286conf = Configure(env,
287                 conf_dir = joinpath(build_root, '.scons_config'),
288                 log_file = joinpath(build_root, 'scons_config.log'))
289
290# Find Python include and library directories for embedding the
291# interpreter.  For consistency, we will use the same Python
292# installation used to run scons (and thus this script).  If you want
293# to link in an alternate version, see above for instructions on how
294# to invoke scons with a different copy of the Python interpreter.
295
296# Get brief Python version name (e.g., "python2.4") for locating
297# include & library files
298py_version_name = 'python' + sys.version[:3]
299
300# include path, e.g. /usr/local/include/python2.4
301py_header_path = joinpath(sys.exec_prefix, 'include', py_version_name)
302env.Append(CPPPATH = py_header_path)
303# verify that it works
304if not conf.CheckHeader('Python.h', '<>'):
305    print "Error: can't find Python.h header in", py_header_path
306    Exit(1)
307
308# add library path too if it's not in the default place
309py_lib_path = None
310if sys.exec_prefix != '/usr':
311    py_lib_path = joinpath(sys.exec_prefix, 'lib')
312elif sys.platform == 'cygwin':
313    # cygwin puts the .dll in /bin for some reason
314    py_lib_path = '/bin'
315if py_lib_path:
316    env.Append(LIBPATH = py_lib_path)
317    print 'Adding', py_lib_path, 'to LIBPATH for', py_version_name
318if not conf.CheckLib(py_version_name):
319    print "Error: can't find Python library", py_version_name
320    Exit(1)
321
322# On Solaris you need to use libsocket for socket ops
323if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
324   if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
325       print "Can't find library with socket calls (e.g. accept())"
326       Exit(1)
327
328# Check for zlib.  If the check passes, libz will be automatically
329# added to the LIBS environment variable.
330if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
331    print 'Error: did not find needed zlib compression library '\
332          'and/or zlib.h header file.'
333    print '       Please install zlib and try again.'
334    Exit(1)
335
336# Check for <fenv.h> (C99 FP environment control)
337have_fenv = conf.CheckHeader('fenv.h', '<>')
338if not have_fenv:
339    print "Warning: Header file <fenv.h> not found."
340    print "         This host has no IEEE FP rounding mode control."
341
342# Check for mysql.
343mysql_config = WhereIs('mysql_config')
344have_mysql = mysql_config != None
345
346# Check MySQL version.
347if have_mysql:
348    mysql_version = os.popen(mysql_config + ' --version').read()
349    min_mysql_version = '4.1'
350    if compare_versions(mysql_version, min_mysql_version) < 0:
351        print 'Warning: MySQL', min_mysql_version, 'or newer required.'
352        print '         Version', mysql_version, 'detected.'
353        have_mysql = False
354
355# Set up mysql_config commands.
356if have_mysql:
357    mysql_config_include = mysql_config + ' --include'
358    if os.system(mysql_config_include + ' > /dev/null') != 0:
359        # older mysql_config versions don't support --include, use
360        # --cflags instead
361        mysql_config_include = mysql_config + ' --cflags | sed s/\\\'//g'
362    # This seems to work in all versions
363    mysql_config_libs = mysql_config + ' --libs'
364
365env = conf.Finish()
366
367# Define the universe of supported ISAs
368all_isa_list = [ ]
369Export('all_isa_list')
370
371# Define the universe of supported CPU models
372all_cpu_list = [ ]
373default_cpus = [ ]
374Export('all_cpu_list', 'default_cpus')
375
376# Sticky options get saved in the options file so they persist from
377# one invocation to the next (unless overridden, in which case the new
378# value becomes sticky).
379sticky_opts = Options(args=ARGUMENTS)
380Export('sticky_opts')
381
382# Non-sticky options only apply to the current build.
383nonsticky_opts = Options(args=ARGUMENTS)
384Export('nonsticky_opts')
385
386# Walk the tree and execute all SConsopts scripts that wil add to the
387# above options
388for root, dirs, files in os.walk('.'):
389    if 'SConsopts' in files:
390        SConscript(os.path.join(root, 'SConsopts'))
391
392all_isa_list.sort()
393all_cpu_list.sort()
394default_cpus.sort()
395
396sticky_opts.AddOptions(
397    EnumOption('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list),
398    BoolOption('FULL_SYSTEM', 'Full-system support', False),
399    # There's a bug in scons 0.96.1 that causes ListOptions with list
400    # values (more than one value) not to be able to be restored from
401    # a saved option file.  If this causes trouble then upgrade to
402    # scons 0.96.90 or later.
403    ListOption('CPU_MODELS', 'CPU models', default_cpus, all_cpu_list),
404    BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False),
405    BoolOption('EFENCE', 'Link with Electric Fence malloc debugger',
406               False),
407    BoolOption('SS_COMPATIBLE_FP',
408               'Make floating-point results compatible with SimpleScalar',
409               False),
410    BoolOption('USE_SSE2',
411               'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
412               False),
413    BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql),
414    BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
415    BoolOption('USE_CHECKER', 'Use checker for detailed CPU models', False),
416    ('CC', 'C compiler', os.environ.get('CC', env['CC'])),
417    ('CXX', 'C++ compiler', os.environ.get('CXX', env['CXX'])),
418    BoolOption('BATCH', 'Use batch pool for build and tests', False),
419    ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
420    ('PYTHONHOME',
421     'Override the default PYTHONHOME for this system (use with caution)',
422     '%s:%s' % (sys.prefix, sys.exec_prefix))
423    )
424
425nonsticky_opts.AddOptions(
426    BoolOption('update_ref', 'Update test reference outputs', False)
427    )
428
429# These options get exported to #defines in config/*.hh (see src/SConscript).
430env.ExportOptions = ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \
431                     'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \
432                     'USE_CHECKER', 'PYTHONHOME', 'TARGET_ISA']
433
434# Define a handy 'no-op' action
435def no_action(target, source, env):
436    return 0
437
438env.NoAction = Action(no_action, None)
439
440###################################################
441#
442# Define a SCons builder for configuration flag headers.
443#
444###################################################
445
446# This function generates a config header file that #defines the
447# option symbol to the current option setting (0 or 1).  The source
448# operands are the name of the option and a Value node containing the
449# value of the option.
450def build_config_file(target, source, env):
451    (option, value) = [s.get_contents() for s in source]
452    f = file(str(target[0]), 'w')
453    print >> f, '#define', option, value
454    f.close()
455    return None
456
457# Generate the message to be printed when building the config file.
458def build_config_file_string(target, source, env):
459    (option, value) = [s.get_contents() for s in source]
460    return "Defining %s as %s in %s." % (option, value, target[0])
461
462# Combine the two functions into a scons Action object.
463config_action = Action(build_config_file, build_config_file_string)
464
465# The emitter munges the source & target node lists to reflect what
466# we're really doing.
467def config_emitter(target, source, env):
468    # extract option name from Builder arg
469    option = str(target[0])
470    # True target is config header file
471    target = joinpath('config', option.lower() + '.hh')
472    val = env[option]
473    if isinstance(val, bool):
474        # Force value to 0/1
475        val = int(val)
476    elif isinstance(val, str):
477        val = '"' + val + '"'
478        
479    # Sources are option name & value (packaged in SCons Value nodes)
480    return ([target], [Value(option), Value(val)])
481
482config_builder = Builder(emitter = config_emitter, action = config_action)
483
484env.Append(BUILDERS = { 'ConfigFile' : config_builder })
485
486###################################################
487#
488# Define a SCons builder for copying files.  This is used by the
489# Python zipfile code in src/python/SConscript, but is placed up here
490# since it's potentially more generally applicable.
491#
492###################################################
493
494copy_builder = Builder(action = Copy("$TARGET", "$SOURCE"))
495
496env.Append(BUILDERS = { 'CopyFile' : copy_builder })
497
498###################################################
499#
500# Define a simple SCons builder to concatenate files.
501#
502# Used to append the Python zip archive to the executable.
503#
504###################################################
505
506concat_builder = Builder(action = Action(['cat $SOURCES > $TARGET',
507                                          'chmod +x $TARGET']))
508
509env.Append(BUILDERS = { 'Concat' : concat_builder })
510
511
512# base help text
513help_text = '''
514Usage: scons [scons options] [build options] [target(s)]
515
516'''
517
518# libelf build is shared across all configs in the build root.
519env.SConscript('ext/libelf/SConscript',
520               build_dir = joinpath(build_root, 'libelf'),
521               exports = 'env')
522
523###################################################
524#
525# This function is used to set up a directory with switching headers
526#
527###################################################
528
529env['ALL_ISA_LIST'] = all_isa_list
530def make_switching_dir(dirname, switch_headers, env):
531    # Generate the header.  target[0] is the full path of the output
532    # header to generate.  'source' is a dummy variable, since we get the
533    # list of ISAs from env['ALL_ISA_LIST'].
534    def gen_switch_hdr(target, source, env):
535	fname = str(target[0])
536	basename = os.path.basename(fname)
537	f = open(fname, 'w')
538	f.write('#include "arch/isa_specific.hh"\n')
539	cond = '#if'
540	for isa in all_isa_list:
541	    f.write('%s THE_ISA == %s_ISA\n#include "%s/%s/%s"\n'
542		    % (cond, isa.upper(), dirname, isa, basename))
543	    cond = '#elif'
544	f.write('#else\n#error "THE_ISA not set"\n#endif\n')
545	f.close()
546	return 0
547
548    # String to print when generating header
549    def gen_switch_hdr_string(target, source, env):
550	return "Generating switch header " + str(target[0])
551
552    # Build SCons Action object. 'varlist' specifies env vars that this
553    # action depends on; when env['ALL_ISA_LIST'] changes these actions
554    # should get re-executed.
555    switch_hdr_action = Action(gen_switch_hdr, gen_switch_hdr_string,
556                               varlist=['ALL_ISA_LIST'])
557
558    # Instantiate actions for each header
559    for hdr in switch_headers:
560        env.Command(hdr, [], switch_hdr_action)
561Export('make_switching_dir')
562
563###################################################
564#
565# Define build environments for selected configurations.
566#
567###################################################
568
569# rename base env
570base_env = env
571
572for build_path in build_paths:
573    print "Building in", build_path
574    # build_dir is the tail component of build path, and is used to
575    # determine the build parameters (e.g., 'ALPHA_SE')
576    (build_root, build_dir) = os.path.split(build_path)
577    # Make a copy of the build-root environment to use for this config.
578    env = base_env.Copy()
579
580    # Set env options according to the build directory config.
581    sticky_opts.files = []
582    # Options for $BUILD_ROOT/$BUILD_DIR are stored in
583    # $BUILD_ROOT/options/$BUILD_DIR so you can nuke
584    # $BUILD_ROOT/$BUILD_DIR without losing your options settings.
585    current_opts_file = joinpath(build_root, 'options', build_dir)
586    if os.path.isfile(current_opts_file):
587        sticky_opts.files.append(current_opts_file)
588        print "Using saved options file %s" % current_opts_file
589    else:
590        # Build dir-specific options file doesn't exist.
591
592        # Make sure the directory is there so we can create it later
593        opt_dir = os.path.dirname(current_opts_file)
594        if not os.path.isdir(opt_dir):
595            os.mkdir(opt_dir)
596
597        # Get default build options from source tree.  Options are
598        # normally determined by name of $BUILD_DIR, but can be
599        # overriden by 'default=' arg on command line.
600        default_opts_file = joinpath('build_opts',
601                                     ARGUMENTS.get('default', build_dir))
602        if os.path.isfile(default_opts_file):
603            sticky_opts.files.append(default_opts_file)
604            print "Options file %s not found,\n  using defaults in %s" \
605                  % (current_opts_file, default_opts_file)
606        else:
607            print "Error: cannot find options file %s or %s" \
608                  % (current_opts_file, default_opts_file)
609            Exit(1)
610
611    # Apply current option settings to env
612    sticky_opts.Update(env)
613    nonsticky_opts.Update(env)
614
615    help_text += "Sticky options for %s:\n" % build_dir \
616                 + sticky_opts.GenerateHelpText(env) \
617                 + "\nNon-sticky options for %s:\n" % build_dir \
618                 + nonsticky_opts.GenerateHelpText(env)
619
620    # Process option settings.
621
622    if not have_fenv and env['USE_FENV']:
623        print "Warning: <fenv.h> not available; " \
624              "forcing USE_FENV to False in", build_dir + "."
625        env['USE_FENV'] = False
626
627    if not env['USE_FENV']:
628        print "Warning: No IEEE FP rounding mode control in", build_dir + "."
629        print "         FP results may deviate slightly from other platforms."
630
631    if env['EFENCE']:
632        env.Append(LIBS=['efence'])
633
634    if env['USE_MYSQL']:
635        if not have_mysql:
636            print "Warning: MySQL not available; " \
637                  "forcing USE_MYSQL to False in", build_dir + "."
638            env['USE_MYSQL'] = False
639        else:
640            print "Compiling in", build_dir, "with MySQL support."
641            env.ParseConfig(mysql_config_libs)
642            env.ParseConfig(mysql_config_include)
643
644    # Save sticky option settings back to current options file
645    sticky_opts.Save(current_opts_file, env)
646
647    # Do this after we save setting back, or else we'll tack on an
648    # extra 'qdo' every time we run scons.
649    if env['BATCH']:
650        env['CC']  = env['BATCH_CMD'] + ' ' + env['CC']
651        env['CXX'] = env['BATCH_CMD'] + ' ' + env['CXX']
652
653    if env['USE_SSE2']:
654        env.Append(CCFLAGS='-msse2')
655
656    # The src/SConscript file sets up the build rules in 'env' according
657    # to the configured options.  It returns a list of environments,
658    # one for each variant build (debug, opt, etc.)
659    envList = SConscript('src/SConscript', build_dir = build_path,
660                         exports = 'env')
661
662    # Set up the regression tests for each build.
663    for e in envList:
664        SConscript('tests/SConscript',
665                   build_dir = joinpath(build_path, 'tests', e.Label),
666                   exports = { 'env' : e }, duplicate = False)
667
668Help(help_text)
669
670
671###################################################
672#
673# Let SCons do its thing.  At this point SCons will use the defined
674# build environments to build the requested targets.
675#
676###################################################
677
678