SConstruct revision 3643
1# -*- mode:python -*- 2 3# Copyright (c) 2004-2005 The Regents of The University of Michigan 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions are 8# met: redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer; 10# redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution; 13# neither the name of the copyright holders nor the names of its 14# contributors may be used to endorse or promote products derived from 15# this software without specific prior written permission. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28# 29# Authors: Steve Reinhardt 30 31################################################### 32# 33# SCons top-level build description (SConstruct) file. 34# 35# While in this directory ('m5'), just type 'scons' to build the default 36# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 37# to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for 38# the optimized full-system version). 39# 40# You can build M5 in a different directory as long as there is a 41# 'build/<CONFIG>' somewhere along the target path. The build system 42# expects that all configs under the same build directory are being 43# built for the same host system. 44# 45# Examples: 46# 47# The following two commands are equivalent. The '-u' option tells 48# scons to search up the directory tree for this SConstruct file. 49# % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug 50# % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug 51# 52# The following two commands are equivalent and demonstrate building 53# in a directory outside of the source tree. The '-C' option tells 54# scons to chdir to the specified directory to find this SConstruct 55# file. 56# % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug 57# % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug 58# 59# You can use 'scons -H' to print scons options. If you're in this 60# 'm5' directory (or use -u or -C to tell scons where to find this 61# file), you can use 'scons -h' to print all the M5-specific build 62# options as well. 63# 64################################################### 65 66# Python library imports 67import sys 68import os 69 70# Check for recent-enough Python and SCons versions. If your system's 71# default installation of Python is not recent enough, you can use a 72# non-default installation of the Python interpreter by either (1) 73# rearranging your PATH so that scons finds the non-default 'python' 74# first or (2) explicitly invoking an alternative interpreter on the 75# scons script, e.g., "/usr/local/bin/python2.4 `which scons` [args]". 76EnsurePythonVersion(2,4) 77 78# Ironically, SCons 0.96 dies if you give EnsureSconsVersion a 79# 3-element version number. 80min_scons_version = (0,96,91) 81try: 82 EnsureSConsVersion(*min_scons_version) 83except: 84 print "Error checking current SCons version." 85 print "SCons", ".".join(map(str,min_scons_version)), "or greater required." 86 Exit(2) 87 88 89# The absolute path to the current directory (where this file lives). 90ROOT = Dir('.').abspath 91 92# Paths to the M5 and external source trees. 93SRCDIR = os.path.join(ROOT, 'src') 94 95# tell python where to find m5 python code 96sys.path.append(os.path.join(ROOT, 'src/python')) 97 98################################################### 99# 100# Figure out which configurations to set up based on the path(s) of 101# the target(s). 102# 103################################################### 104 105# Find default configuration & binary. 106Default(os.environ.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug')) 107 108# Ask SCons which directory it was invoked from. 109launch_dir = GetLaunchDir() 110 111# Make targets relative to invocation directory 112abs_targets = map(lambda x: os.path.normpath(os.path.join(launch_dir, str(x))), 113 BUILD_TARGETS) 114 115# helper function: find last occurrence of element in list 116def rfind(l, elt, offs = -1): 117 for i in range(len(l)+offs, 0, -1): 118 if l[i] == elt: 119 return i 120 raise ValueError, "element not found" 121 122# helper function: compare dotted version numbers. 123# E.g., compare_version('1.3.25', '1.4.1') 124# returns -1, 0, 1 if v1 is <, ==, > v2 125def compare_versions(v1, v2): 126 # Convert dotted strings to lists 127 v1 = map(int, v1.split('.')) 128 v2 = map(int, v2.split('.')) 129 # Compare corresponding elements of lists 130 for n1,n2 in zip(v1, v2): 131 if n1 < n2: return -1 132 if n1 > n2: return 1 133 # all corresponding values are equal... see if one has extra values 134 if len(v1) < len(v2): return -1 135 if len(v1) > len(v2): return 1 136 return 0 137 138# Each target must have 'build' in the interior of the path; the 139# directory below this will determine the build parameters. For 140# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 141# recognize that ALPHA_SE specifies the configuration because it 142# follow 'build' in the bulid path. 143 144# Generate a list of the unique build roots and configs that the 145# collected targets reference. 146build_paths = [] 147build_root = None 148for t in abs_targets: 149 path_dirs = t.split('/') 150 try: 151 build_top = rfind(path_dirs, 'build', -2) 152 except: 153 print "Error: no non-leaf 'build' dir found on target path", t 154 Exit(1) 155 this_build_root = os.path.join('/',*path_dirs[:build_top+1]) 156 if not build_root: 157 build_root = this_build_root 158 else: 159 if this_build_root != build_root: 160 print "Error: build targets not under same build root\n"\ 161 " %s\n %s" % (build_root, this_build_root) 162 Exit(1) 163 build_path = os.path.join('/',*path_dirs[:build_top+2]) 164 if build_path not in build_paths: 165 build_paths.append(build_path) 166 167################################################### 168# 169# Set up the default build environment. This environment is copied 170# and modified according to each selected configuration. 171# 172################################################### 173 174env = Environment(ENV = os.environ, # inherit user's environment vars 175 ROOT = ROOT, 176 SRCDIR = SRCDIR) 177 178#Parse CC/CXX early so that we use the correct compiler for 179# to test for dependencies/versions/libraries/includes 180if ARGUMENTS.get('CC', None): 181 env['CC'] = ARGUMENTS.get('CC') 182 183if ARGUMENTS.get('CXX', None): 184 env['CXX'] = ARGUMENTS.get('CXX') 185 186env.SConsignFile(os.path.join(build_root,"sconsign")) 187 188# Default duplicate option is to use hard links, but this messes up 189# when you use emacs to edit a file in the target dir, as emacs moves 190# file to file~ then copies to file, breaking the link. Symbolic 191# (soft) links work better. 192env.SetOption('duplicate', 'soft-copy') 193 194# I waffle on this setting... it does avoid a few painful but 195# unnecessary builds, but it also seems to make trivial builds take 196# noticeably longer. 197if False: 198 env.TargetSignatures('content') 199 200# M5_PLY is used by isa_parser.py to find the PLY package. 201env.Append(ENV = { 'M5_PLY' : Dir('ext/ply') }) 202 203# Set up default C++ compiler flags 204env.Append(CCFLAGS='-pipe') 205env.Append(CCFLAGS='-fno-strict-aliasing') 206env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef')) 207if sys.platform == 'cygwin': 208 # cygwin has some header file issues... 209 env.Append(CCFLAGS=Split("-Wno-uninitialized")) 210env.Append(CPPPATH=[Dir('ext/dnet')]) 211 212# Check for SWIG 213if not env.has_key('SWIG'): 214 print 'Error: SWIG utility not found.' 215 print ' Please install (see http://www.swig.org) and retry.' 216 Exit(1) 217 218# Check for appropriate SWIG version 219swig_version = os.popen('swig -version').read().split() 220# First 3 words should be "SWIG Version x.y.z" 221if swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 222 print 'Error determining SWIG version.' 223 Exit(1) 224 225min_swig_version = '1.3.28' 226if compare_versions(swig_version[2], min_swig_version) < 0: 227 print 'Error: SWIG version', min_swig_version, 'or newer required.' 228 print ' Installed version:', swig_version[2] 229 Exit(1) 230 231# Set up SWIG flags & scanner 232env.Append(SWIGFLAGS=Split('-c++ -python -modern $_CPPINCFLAGS')) 233 234import SCons.Scanner 235 236swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 237 238swig_scanner = SCons.Scanner.ClassicCPP("SwigScan", ".i", "CPPPATH", 239 swig_inc_re) 240 241env.Append(SCANNERS = swig_scanner) 242 243# Platform-specific configuration. Note again that we assume that all 244# builds under a given build root run on the same host platform. 245conf = Configure(env, 246 conf_dir = os.path.join(build_root, '.scons_config'), 247 log_file = os.path.join(build_root, 'scons_config.log')) 248 249# Find Python include and library directories for embedding the 250# interpreter. For consistency, we will use the same Python 251# installation used to run scons (and thus this script). If you want 252# to link in an alternate version, see above for instructions on how 253# to invoke scons with a different copy of the Python interpreter. 254 255# Get brief Python version name (e.g., "python2.4") for locating 256# include & library files 257py_version_name = 'python' + sys.version[:3] 258 259# include path, e.g. /usr/local/include/python2.4 260py_header_path = os.path.join(sys.exec_prefix, 'include', py_version_name) 261env.Append(CPPPATH = py_header_path) 262# verify that it works 263if not conf.CheckHeader('Python.h', '<>'): 264 print "Error: can't find Python.h header in", py_header_path 265 Exit(1) 266 267# add library path too if it's not in the default place 268py_lib_path = None 269if sys.exec_prefix != '/usr': 270 py_lib_path = os.path.join(sys.exec_prefix, 'lib') 271elif sys.platform == 'cygwin': 272 # cygwin puts the .dll in /bin for some reason 273 py_lib_path = '/bin' 274if py_lib_path: 275 env.Append(LIBPATH = py_lib_path) 276 print 'Adding', py_lib_path, 'to LIBPATH for', py_version_name 277if not conf.CheckLib(py_version_name): 278 print "Error: can't find Python library", py_version_name 279 Exit(1) 280 281# On Solaris you need to use libsocket for socket ops 282if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 283 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 284 print "Can't find library with socket calls (e.g. accept())" 285 Exit(1) 286 287# Check for zlib. If the check passes, libz will be automatically 288# added to the LIBS environment variable. 289if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++'): 290 print 'Error: did not find needed zlib compression library '\ 291 'and/or zlib.h header file.' 292 print ' Please install zlib and try again.' 293 Exit(1) 294 295# Check for <fenv.h> (C99 FP environment control) 296have_fenv = conf.CheckHeader('fenv.h', '<>') 297if not have_fenv: 298 print "Warning: Header file <fenv.h> not found." 299 print " This host has no IEEE FP rounding mode control." 300 301# Check for mysql. 302mysql_config = WhereIs('mysql_config') 303have_mysql = mysql_config != None 304 305# Check MySQL version. 306if have_mysql: 307 mysql_version = os.popen(mysql_config + ' --version').read() 308 min_mysql_version = '4.1' 309 if compare_versions(mysql_version, min_mysql_version) < 0: 310 print 'Warning: MySQL', min_mysql_version, 'or newer required.' 311 print ' Version', mysql_version, 'detected.' 312 have_mysql = False 313 314# Set up mysql_config commands. 315if have_mysql: 316 mysql_config_include = mysql_config + ' --include' 317 if os.system(mysql_config_include + ' > /dev/null') != 0: 318 # older mysql_config versions don't support --include, use 319 # --cflags instead 320 mysql_config_include = mysql_config + ' --cflags | sed s/\\\'//g' 321 # This seems to work in all versions 322 mysql_config_libs = mysql_config + ' --libs' 323 324env = conf.Finish() 325 326# Define the universe of supported ISAs 327env['ALL_ISA_LIST'] = ['alpha', 'sparc', 'mips'] 328 329# Define the universe of supported CPU models 330env['ALL_CPU_LIST'] = ['AtomicSimpleCPU', 'TimingSimpleCPU', 331 'O3CPU', 'OzoneCPU'] 332 333if os.path.isdir(os.path.join(SRCDIR, 'src/encumbered/cpu/full')): 334 env['ALL_CPU_LIST'] += ['FullCPU'] 335 336# Sticky options get saved in the options file so they persist from 337# one invocation to the next (unless overridden, in which case the new 338# value becomes sticky). 339sticky_opts = Options(args=ARGUMENTS) 340sticky_opts.AddOptions( 341 EnumOption('TARGET_ISA', 'Target ISA', 'alpha', env['ALL_ISA_LIST']), 342 BoolOption('FULL_SYSTEM', 'Full-system support', False), 343 # There's a bug in scons 0.96.1 that causes ListOptions with list 344 # values (more than one value) not to be able to be restored from 345 # a saved option file. If this causes trouble then upgrade to 346 # scons 0.96.90 or later. 347 ListOption('CPU_MODELS', 'CPU models', 'AtomicSimpleCPU,TimingSimpleCPU', 348 env['ALL_CPU_LIST']), 349 BoolOption('ALPHA_TLASER', 350 'Model Alpha TurboLaser platform (vs. Tsunami)', False), 351 BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False), 352 BoolOption('EFENCE', 'Link with Electric Fence malloc debugger', 353 False), 354 BoolOption('SS_COMPATIBLE_FP', 355 'Make floating-point results compatible with SimpleScalar', 356 False), 357 BoolOption('USE_SSE2', 358 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 359 False), 360 BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql), 361 BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 362 BoolOption('USE_CHECKER', 'Use checker for detailed CPU models', False), 363 ('CC', 'C compiler', os.environ.get('CC', env['CC'])), 364 ('CXX', 'C++ compiler', os.environ.get('CXX', env['CXX'])), 365 BoolOption('BATCH', 'Use batch pool for build and tests', False), 366 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 367 ('PYTHONHOME', 368 'Override the default PYTHONHOME for this system (use with caution)', 369 '%s:%s' % (sys.prefix, sys.exec_prefix)) 370 ) 371 372# Non-sticky options only apply to the current build. 373nonsticky_opts = Options(args=ARGUMENTS) 374nonsticky_opts.AddOptions( 375 BoolOption('update_ref', 'Update test reference outputs', False) 376 ) 377 378# These options get exported to #defines in config/*.hh (see src/SConscript). 379env.ExportOptions = ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \ 380 'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \ 381 'USE_CHECKER', 'PYTHONHOME', 'TARGET_ISA'] 382 383# Define a handy 'no-op' action 384def no_action(target, source, env): 385 return 0 386 387env.NoAction = Action(no_action, None) 388 389################################################### 390# 391# Define a SCons builder for configuration flag headers. 392# 393################################################### 394 395# This function generates a config header file that #defines the 396# option symbol to the current option setting (0 or 1). The source 397# operands are the name of the option and a Value node containing the 398# value of the option. 399def build_config_file(target, source, env): 400 (option, value) = [s.get_contents() for s in source] 401 f = file(str(target[0]), 'w') 402 print >> f, '#define', option, value 403 f.close() 404 return None 405 406# Generate the message to be printed when building the config file. 407def build_config_file_string(target, source, env): 408 (option, value) = [s.get_contents() for s in source] 409 return "Defining %s as %s in %s." % (option, value, target[0]) 410 411# Combine the two functions into a scons Action object. 412config_action = Action(build_config_file, build_config_file_string) 413 414# The emitter munges the source & target node lists to reflect what 415# we're really doing. 416def config_emitter(target, source, env): 417 # extract option name from Builder arg 418 option = str(target[0]) 419 # True target is config header file 420 target = os.path.join('config', option.lower() + '.hh') 421 val = env[option] 422 if isinstance(val, bool): 423 # Force value to 0/1 424 val = int(val) 425 elif isinstance(val, str): 426 val = '"' + val + '"' 427 428 # Sources are option name & value (packaged in SCons Value nodes) 429 return ([target], [Value(option), Value(val)]) 430 431config_builder = Builder(emitter = config_emitter, action = config_action) 432 433env.Append(BUILDERS = { 'ConfigFile' : config_builder }) 434 435################################################### 436# 437# Define a SCons builder for copying files. This is used by the 438# Python zipfile code in src/python/SConscript, but is placed up here 439# since it's potentially more generally applicable. 440# 441################################################### 442 443copy_builder = Builder(action = Copy("$TARGET", "$SOURCE")) 444 445env.Append(BUILDERS = { 'CopyFile' : copy_builder }) 446 447################################################### 448# 449# Define a simple SCons builder to concatenate files. 450# 451# Used to append the Python zip archive to the executable. 452# 453################################################### 454 455concat_builder = Builder(action = Action(['cat $SOURCES > $TARGET', 456 'chmod +x $TARGET'])) 457 458env.Append(BUILDERS = { 'Concat' : concat_builder }) 459 460 461# base help text 462help_text = ''' 463Usage: scons [scons options] [build options] [target(s)] 464 465''' 466 467# libelf build is shared across all configs in the build root. 468env.SConscript('ext/libelf/SConscript', 469 build_dir = os.path.join(build_root, 'libelf'), 470 exports = 'env') 471 472################################################### 473# 474# This function is used to set up a directory with switching headers 475# 476################################################### 477 478def make_switching_dir(dirname, switch_headers, env): 479 # Generate the header. target[0] is the full path of the output 480 # header to generate. 'source' is a dummy variable, since we get the 481 # list of ISAs from env['ALL_ISA_LIST']. 482 def gen_switch_hdr(target, source, env): 483 fname = str(target[0]) 484 basename = os.path.basename(fname) 485 f = open(fname, 'w') 486 f.write('#include "arch/isa_specific.hh"\n') 487 cond = '#if' 488 for isa in env['ALL_ISA_LIST']: 489 f.write('%s THE_ISA == %s_ISA\n#include "%s/%s/%s"\n' 490 % (cond, isa.upper(), dirname, isa, basename)) 491 cond = '#elif' 492 f.write('#else\n#error "THE_ISA not set"\n#endif\n') 493 f.close() 494 return 0 495 496 # String to print when generating header 497 def gen_switch_hdr_string(target, source, env): 498 return "Generating switch header " + str(target[0]) 499 500 # Build SCons Action object. 'varlist' specifies env vars that this 501 # action depends on; when env['ALL_ISA_LIST'] changes these actions 502 # should get re-executed. 503 switch_hdr_action = Action(gen_switch_hdr, gen_switch_hdr_string, 504 varlist=['ALL_ISA_LIST']) 505 506 # Instantiate actions for each header 507 for hdr in switch_headers: 508 env.Command(hdr, [], switch_hdr_action) 509 510env.make_switching_dir = make_switching_dir 511 512################################################### 513# 514# Define build environments for selected configurations. 515# 516################################################### 517 518# rename base env 519base_env = env 520 521for build_path in build_paths: 522 print "Building in", build_path 523 # build_dir is the tail component of build path, and is used to 524 # determine the build parameters (e.g., 'ALPHA_SE') 525 (build_root, build_dir) = os.path.split(build_path) 526 # Make a copy of the build-root environment to use for this config. 527 env = base_env.Copy() 528 529 # Set env options according to the build directory config. 530 sticky_opts.files = [] 531 # Options for $BUILD_ROOT/$BUILD_DIR are stored in 532 # $BUILD_ROOT/options/$BUILD_DIR so you can nuke 533 # $BUILD_ROOT/$BUILD_DIR without losing your options settings. 534 current_opts_file = os.path.join(build_root, 'options', build_dir) 535 if os.path.isfile(current_opts_file): 536 sticky_opts.files.append(current_opts_file) 537 print "Using saved options file %s" % current_opts_file 538 else: 539 # Build dir-specific options file doesn't exist. 540 541 # Make sure the directory is there so we can create it later 542 opt_dir = os.path.dirname(current_opts_file) 543 if not os.path.isdir(opt_dir): 544 os.mkdir(opt_dir) 545 546 # Get default build options from source tree. Options are 547 # normally determined by name of $BUILD_DIR, but can be 548 # overriden by 'default=' arg on command line. 549 default_opts_file = os.path.join('build_opts', 550 ARGUMENTS.get('default', build_dir)) 551 if os.path.isfile(default_opts_file): 552 sticky_opts.files.append(default_opts_file) 553 print "Options file %s not found,\n using defaults in %s" \ 554 % (current_opts_file, default_opts_file) 555 else: 556 print "Error: cannot find options file %s or %s" \ 557 % (current_opts_file, default_opts_file) 558 Exit(1) 559 560 # Apply current option settings to env 561 sticky_opts.Update(env) 562 nonsticky_opts.Update(env) 563 564 help_text += "Sticky options for %s:\n" % build_dir \ 565 + sticky_opts.GenerateHelpText(env) \ 566 + "\nNon-sticky options for %s:\n" % build_dir \ 567 + nonsticky_opts.GenerateHelpText(env) 568 569 # Process option settings. 570 571 if not have_fenv and env['USE_FENV']: 572 print "Warning: <fenv.h> not available; " \ 573 "forcing USE_FENV to False in", build_dir + "." 574 env['USE_FENV'] = False 575 576 if not env['USE_FENV']: 577 print "Warning: No IEEE FP rounding mode control in", build_dir + "." 578 print " FP results may deviate slightly from other platforms." 579 580 if env['EFENCE']: 581 env.Append(LIBS=['efence']) 582 583 if env['USE_MYSQL']: 584 if not have_mysql: 585 print "Warning: MySQL not available; " \ 586 "forcing USE_MYSQL to False in", build_dir + "." 587 env['USE_MYSQL'] = False 588 else: 589 print "Compiling in", build_dir, "with MySQL support." 590 env.ParseConfig(mysql_config_libs) 591 env.ParseConfig(mysql_config_include) 592 593 # Save sticky option settings back to current options file 594 sticky_opts.Save(current_opts_file, env) 595 596 # Do this after we save setting back, or else we'll tack on an 597 # extra 'qdo' every time we run scons. 598 if env['BATCH']: 599 env['CC'] = env['BATCH_CMD'] + ' ' + env['CC'] 600 env['CXX'] = env['BATCH_CMD'] + ' ' + env['CXX'] 601 602 if env['USE_SSE2']: 603 env.Append(CCFLAGS='-msse2') 604 605 # The src/SConscript file sets up the build rules in 'env' according 606 # to the configured options. It returns a list of environments, 607 # one for each variant build (debug, opt, etc.) 608 envList = SConscript('src/SConscript', build_dir = build_path, 609 exports = 'env') 610 611 # Set up the regression tests for each build. 612 for e in envList: 613 SConscript('tests/SConscript', 614 build_dir = os.path.join(build_path, 'tests', e.Label), 615 exports = { 'env' : e }, duplicate = False) 616 617Help(help_text) 618 619 620################################################### 621# 622# Let SCons do its thing. At this point SCons will use the defined 623# build environments to build the requested targets. 624# 625################################################### 626 627