SConstruct revision 11927
1# -*- mode:python -*- 2 3# Copyright (c) 2013, 2015, 2016 ARM Limited 4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81# Check for recent-enough Python and SCons versions. 82try: 83 # Really old versions of scons only take two options for the 84 # function, so check once without the revision and once with the 85 # revision, the first instance will fail for stuff other than 86 # 0.98, and the second will fail for 0.98.0 87 EnsureSConsVersion(0, 98) 88 EnsureSConsVersion(0, 98, 1) 89except SystemExit, e: 90 print """ 91For more details, see: 92 http://gem5.org/Dependencies 93""" 94 raise 95 96# We ensure the python version early because because python-config 97# requires python 2.5 98try: 99 EnsurePythonVersion(2, 5) 100except SystemExit, e: 101 print """ 102You can use a non-default installation of the Python interpreter by 103rearranging your PATH so that scons finds the non-default 'python' and 104'python-config' first. 105 106For more details, see: 107 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 108""" 109 raise 110 111# Global Python includes 112import itertools 113import os 114import re 115import shutil 116import subprocess 117import sys 118 119from os import mkdir, environ 120from os.path import abspath, basename, dirname, expanduser, normpath 121from os.path import exists, isdir, isfile 122from os.path import join as joinpath, split as splitpath 123 124# SCons includes 125import SCons 126import SCons.Node 127 128extra_python_paths = [ 129 Dir('src/python').srcnode().abspath, # gem5 includes 130 Dir('ext/ply').srcnode().abspath, # ply is used by several files 131 ] 132 133sys.path[1:1] = extra_python_paths 134 135from m5.util import compareVersions, readCommand 136from m5.util.terminal import get_termcap 137 138help_texts = { 139 "options" : "", 140 "global_vars" : "", 141 "local_vars" : "" 142} 143 144Export("help_texts") 145 146 147# There's a bug in scons in that (1) by default, the help texts from 148# AddOption() are supposed to be displayed when you type 'scons -h' 149# and (2) you can override the help displayed by 'scons -h' using the 150# Help() function, but these two features are incompatible: once 151# you've overridden the help text using Help(), there's no way to get 152# at the help texts from AddOptions. See: 153# http://scons.tigris.org/issues/show_bug.cgi?id=2356 154# http://scons.tigris.org/issues/show_bug.cgi?id=2611 155# This hack lets us extract the help text from AddOptions and 156# re-inject it via Help(). Ideally someday this bug will be fixed and 157# we can just use AddOption directly. 158def AddLocalOption(*args, **kwargs): 159 col_width = 30 160 161 help = " " + ", ".join(args) 162 if "help" in kwargs: 163 length = len(help) 164 if length >= col_width: 165 help += "\n" + " " * col_width 166 else: 167 help += " " * (col_width - length) 168 help += kwargs["help"] 169 help_texts["options"] += help + "\n" 170 171 AddOption(*args, **kwargs) 172 173AddLocalOption('--colors', dest='use_colors', action='store_true', 174 help="Add color to abbreviated scons output") 175AddLocalOption('--no-colors', dest='use_colors', action='store_false', 176 help="Don't add color to abbreviated scons output") 177AddLocalOption('--with-cxx-config', dest='with_cxx_config', 178 action='store_true', 179 help="Build with support for C++-based configuration") 180AddLocalOption('--default', dest='default', type='string', action='store', 181 help='Override which build_opts file to use for defaults') 182AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 183 help='Disable style checking hooks') 184AddLocalOption('--no-lto', dest='no_lto', action='store_true', 185 help='Disable Link-Time Optimization for fast') 186AddLocalOption('--update-ref', dest='update_ref', action='store_true', 187 help='Update test reference outputs') 188AddLocalOption('--verbose', dest='verbose', action='store_true', 189 help='Print full tool command lines') 190AddLocalOption('--without-python', dest='without_python', 191 action='store_true', 192 help='Build without Python configuration support') 193AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 194 action='store_true', 195 help='Disable linking against tcmalloc') 196AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 197 help='Build with Undefined Behavior Sanitizer if available') 198AddLocalOption('--with-asan', dest='with_asan', action='store_true', 199 help='Build with Address Sanitizer if available') 200 201termcap = get_termcap(GetOption('use_colors')) 202 203######################################################################## 204# 205# Set up the main build environment. 206# 207######################################################################## 208 209# export TERM so that clang reports errors in color 210use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 211 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC', 212 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ]) 213 214use_prefixes = [ 215 "ASAN_", # address sanitizer symbolizer path and settings 216 "CCACHE_", # ccache (caching compiler wrapper) configuration 217 "CCC_", # clang static analyzer configuration 218 "DISTCC_", # distcc (distributed compiler wrapper) configuration 219 "INCLUDE_SERVER_", # distcc pump server settings 220 "M5", # M5 configuration (e.g., path to kernels) 221 ] 222 223use_env = {} 224for key,val in sorted(os.environ.iteritems()): 225 if key in use_vars or \ 226 any([key.startswith(prefix) for prefix in use_prefixes]): 227 use_env[key] = val 228 229# Tell scons to avoid implicit command dependencies to avoid issues 230# with the param wrappes being compiled twice (see 231# http://scons.tigris.org/issues/show_bug.cgi?id=2811) 232main = Environment(ENV=use_env, IMPLICIT_COMMAND_DEPENDENCIES=0) 233main.Decider('MD5-timestamp') 234main.root = Dir(".") # The current directory (where this file lives). 235main.srcdir = Dir("src") # The source directory 236 237main_dict_keys = main.Dictionary().keys() 238 239# Check that we have a C/C++ compiler 240if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 241 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)" 242 Exit(1) 243 244# Check that swig is present 245if not 'SWIG' in main_dict_keys: 246 print "swig is not installed (package swig on Ubuntu and RedHat)" 247 Exit(1) 248 249# add useful python code PYTHONPATH so it can be used by subprocesses 250# as well 251main.AppendENVPath('PYTHONPATH', extra_python_paths) 252 253######################################################################## 254# 255# Mercurial Stuff. 256# 257# If the gem5 directory is a mercurial repository, we should do some 258# extra things. 259# 260######################################################################## 261 262hgdir = main.root.Dir(".hg") 263 264 265style_message = """ 266You're missing the gem5 style hook, which automatically checks your code 267against the gem5 style rules on %s. 268This script will now install the hook in your %s. 269Press enter to continue, or ctrl-c to abort: """ 270 271mercurial_style_message = """ 272You're missing the gem5 style hook, which automatically checks your code 273against the gem5 style rules on hg commit and qrefresh commands. 274This script will now install the hook in your .hg/hgrc file. 275Press enter to continue, or ctrl-c to abort: """ 276 277git_style_message = """ 278You're missing the gem5 style or commit message hook. These hooks help 279to ensure that your code follows gem5's style rules on git commit. 280This script will now install the hook in your .git/hooks/ directory. 281Press enter to continue, or ctrl-c to abort: """ 282 283mercurial_style_upgrade_message = """ 284Your Mercurial style hooks are not up-to-date. This script will now 285try to automatically update them. A backup of your hgrc will be saved 286in .hg/hgrc.old. 287Press enter to continue, or ctrl-c to abort: """ 288 289mercurial_style_hook = """ 290# The following lines were automatically added by gem5/SConstruct 291# to provide the gem5 style-checking hooks 292[extensions] 293hgstyle = %s/util/hgstyle.py 294 295[hooks] 296pretxncommit.style = python:hgstyle.check_style 297pre-qrefresh.style = python:hgstyle.check_style 298# End of SConstruct additions 299 300""" % (main.root.abspath) 301 302mercurial_lib_not_found = """ 303Mercurial libraries cannot be found, ignoring style hook. If 304you are a gem5 developer, please fix this and run the style 305hook. It is important. 306""" 307 308# Check for style hook and prompt for installation if it's not there. 309# Skip this if --ignore-style was specified, there's no interactive 310# terminal to prompt, or no recognized revision control system can be 311# found. 312ignore_style = GetOption('ignore_style') or not sys.stdin.isatty() 313 314# Try wire up Mercurial to the style hooks 315if not ignore_style and hgdir.exists(): 316 style_hook = True 317 style_hooks = tuple() 318 hgrc = hgdir.File('hgrc') 319 hgrc_old = hgdir.File('hgrc.old') 320 try: 321 from mercurial import ui 322 ui = ui.ui() 323 ui.readconfig(hgrc.abspath) 324 style_hooks = (ui.config('hooks', 'pretxncommit.style', None), 325 ui.config('hooks', 'pre-qrefresh.style', None)) 326 style_hook = all(style_hooks) 327 style_extension = ui.config('extensions', 'style', None) 328 except ImportError: 329 print mercurial_lib_not_found 330 331 if "python:style.check_style" in style_hooks: 332 # Try to upgrade the style hooks 333 print mercurial_style_upgrade_message 334 # continue unless user does ctrl-c/ctrl-d etc. 335 try: 336 raw_input() 337 except: 338 print "Input exception, exiting scons.\n" 339 sys.exit(1) 340 shutil.copyfile(hgrc.abspath, hgrc_old.abspath) 341 re_style_hook = re.compile(r"^([^=#]+)\.style\s*=\s*([^#\s]+).*") 342 re_style_extension = re.compile("style\s*=\s*([^#\s]+).*") 343 old, new = open(hgrc_old.abspath, 'r'), open(hgrc.abspath, 'w') 344 for l in old: 345 m_hook = re_style_hook.match(l) 346 m_ext = re_style_extension.match(l) 347 if m_hook: 348 hook, check = m_hook.groups() 349 if check != "python:style.check_style": 350 print "Warning: %s.style is using a non-default " \ 351 "checker: %s" % (hook, check) 352 if hook not in ("pretxncommit", "pre-qrefresh"): 353 print "Warning: Updating unknown style hook: %s" % hook 354 355 l = "%s.style = python:hgstyle.check_style\n" % hook 356 elif m_ext and m_ext.group(1) == style_extension: 357 l = "hgstyle = %s/util/hgstyle.py\n" % main.root.abspath 358 359 new.write(l) 360 elif not style_hook: 361 print mercurial_style_message, 362 # continue unless user does ctrl-c/ctrl-d etc. 363 try: 364 raw_input() 365 except: 366 print "Input exception, exiting scons.\n" 367 sys.exit(1) 368 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 369 print "Adding style hook to", hgrc_path, "\n" 370 try: 371 with open(hgrc_path, 'a') as f: 372 f.write(mercurial_style_hook) 373 except: 374 print "Error updating", hgrc_path 375 sys.exit(1) 376 377def install_git_style_hooks(): 378 try: 379 gitdir = Dir(readCommand( 380 ["git", "rev-parse", "--git-dir"]).strip("\n")) 381 except Exception, e: 382 print "Warning: Failed to find git repo directory: %s" % e 383 return 384 385 git_hooks = gitdir.Dir("hooks") 386 def hook_exists(hook_name): 387 hook = git_hooks.File(hook_name) 388 return hook.exists() 389 390 def hook_install(hook_name, script): 391 hook = git_hooks.File(hook_name) 392 if hook.exists(): 393 print "Warning: Can't install %s, hook already exists." % hook_name 394 return 395 396 if hook.islink(): 397 print "Warning: Removing broken symlink for hook %s." % hook_name 398 os.unlink(hook.get_abspath()) 399 400 if not git_hooks.exists(): 401 mkdir(git_hooks.get_abspath()) 402 403 abs_symlink_hooks = git_hooks.islink() and \ 404 os.path.isabs(os.readlink(git_hooks.get_abspath())) 405 406 # Use a relative symlink if the hooks live in the source directory, 407 # and the hooks directory is not a symlink to an absolute path. 408 if hook.is_under(main.root) and not abs_symlink_hooks: 409 script_path = os.path.relpath( 410 script.get_abspath(), 411 hook.Dir(".").get_abspath()) 412 else: 413 script_path = script.get_abspath() 414 415 try: 416 os.symlink(script_path, hook.get_abspath()) 417 except: 418 print "Error updating git %s hook" % hook_name 419 raise 420 421 if hook_exists("pre-commit") and hook_exists("commit-msg"): 422 return 423 424 print git_style_message, 425 try: 426 raw_input() 427 except: 428 print "Input exception, exiting scons.\n" 429 sys.exit(1) 430 431 git_style_script = File("util/git-pre-commit.py") 432 git_msg_script = File("ext/git-commit-msg") 433 434 hook_install("pre-commit", git_style_script) 435 hook_install("commit-msg", git_msg_script) 436 437# Try to wire up git to the style hooks 438if not ignore_style and main.root.Entry(".git").exists(): 439 install_git_style_hooks() 440 441################################################### 442# 443# Figure out which configurations to set up based on the path(s) of 444# the target(s). 445# 446################################################### 447 448# Find default configuration & binary. 449Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 450 451# helper function: find last occurrence of element in list 452def rfind(l, elt, offs = -1): 453 for i in range(len(l)+offs, 0, -1): 454 if l[i] == elt: 455 return i 456 raise ValueError, "element not found" 457 458# Take a list of paths (or SCons Nodes) and return a list with all 459# paths made absolute and ~-expanded. Paths will be interpreted 460# relative to the launch directory unless a different root is provided 461def makePathListAbsolute(path_list, root=GetLaunchDir()): 462 return [abspath(joinpath(root, expanduser(str(p)))) 463 for p in path_list] 464 465# Each target must have 'build' in the interior of the path; the 466# directory below this will determine the build parameters. For 467# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 468# recognize that ALPHA_SE specifies the configuration because it 469# follow 'build' in the build path. 470 471# The funky assignment to "[:]" is needed to replace the list contents 472# in place rather than reassign the symbol to a new list, which 473# doesn't work (obviously!). 474BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 475 476# Generate a list of the unique build roots and configs that the 477# collected targets reference. 478variant_paths = [] 479build_root = None 480for t in BUILD_TARGETS: 481 path_dirs = t.split('/') 482 try: 483 build_top = rfind(path_dirs, 'build', -2) 484 except: 485 print "Error: no non-leaf 'build' dir found on target path", t 486 Exit(1) 487 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 488 if not build_root: 489 build_root = this_build_root 490 else: 491 if this_build_root != build_root: 492 print "Error: build targets not under same build root\n"\ 493 " %s\n %s" % (build_root, this_build_root) 494 Exit(1) 495 variant_path = joinpath('/',*path_dirs[:build_top+2]) 496 if variant_path not in variant_paths: 497 variant_paths.append(variant_path) 498 499# Make sure build_root exists (might not if this is the first build there) 500if not isdir(build_root): 501 mkdir(build_root) 502main['BUILDROOT'] = build_root 503 504Export('main') 505 506main.SConsignFile(joinpath(build_root, "sconsign")) 507 508# Default duplicate option is to use hard links, but this messes up 509# when you use emacs to edit a file in the target dir, as emacs moves 510# file to file~ then copies to file, breaking the link. Symbolic 511# (soft) links work better. 512main.SetOption('duplicate', 'soft-copy') 513 514# 515# Set up global sticky variables... these are common to an entire build 516# tree (not specific to a particular build like ALPHA_SE) 517# 518 519global_vars_file = joinpath(build_root, 'variables.global') 520 521global_vars = Variables(global_vars_file, args=ARGUMENTS) 522 523global_vars.AddVariables( 524 ('CC', 'C compiler', environ.get('CC', main['CC'])), 525 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 526 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 527 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 528 ('BATCH', 'Use batch pool for build and tests', False), 529 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 530 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 531 ('EXTRAS', 'Add extra directories to the compilation', '') 532 ) 533 534# Update main environment with values from ARGUMENTS & global_vars_file 535global_vars.Update(main) 536help_texts["global_vars"] += global_vars.GenerateHelpText(main) 537 538# Save sticky variable settings back to current variables file 539global_vars.Save(global_vars_file, main) 540 541# Parse EXTRAS variable to build list of all directories where we're 542# look for sources etc. This list is exported as extras_dir_list. 543base_dir = main.srcdir.abspath 544if main['EXTRAS']: 545 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 546else: 547 extras_dir_list = [] 548 549Export('base_dir') 550Export('extras_dir_list') 551 552# the ext directory should be on the #includes path 553main.Append(CPPPATH=[Dir('ext')]) 554 555def strip_build_path(path, env): 556 path = str(path) 557 variant_base = env['BUILDROOT'] + os.path.sep 558 if path.startswith(variant_base): 559 path = path[len(variant_base):] 560 elif path.startswith('build/'): 561 path = path[6:] 562 return path 563 564# Generate a string of the form: 565# common/path/prefix/src1, src2 -> tgt1, tgt2 566# to print while building. 567class Transform(object): 568 # all specific color settings should be here and nowhere else 569 tool_color = termcap.Normal 570 pfx_color = termcap.Yellow 571 srcs_color = termcap.Yellow + termcap.Bold 572 arrow_color = termcap.Blue + termcap.Bold 573 tgts_color = termcap.Yellow + termcap.Bold 574 575 def __init__(self, tool, max_sources=99): 576 self.format = self.tool_color + (" [%8s] " % tool) \ 577 + self.pfx_color + "%s" \ 578 + self.srcs_color + "%s" \ 579 + self.arrow_color + " -> " \ 580 + self.tgts_color + "%s" \ 581 + termcap.Normal 582 self.max_sources = max_sources 583 584 def __call__(self, target, source, env, for_signature=None): 585 # truncate source list according to max_sources param 586 source = source[0:self.max_sources] 587 def strip(f): 588 return strip_build_path(str(f), env) 589 if len(source) > 0: 590 srcs = map(strip, source) 591 else: 592 srcs = [''] 593 tgts = map(strip, target) 594 # surprisingly, os.path.commonprefix is a dumb char-by-char string 595 # operation that has nothing to do with paths. 596 com_pfx = os.path.commonprefix(srcs + tgts) 597 com_pfx_len = len(com_pfx) 598 if com_pfx: 599 # do some cleanup and sanity checking on common prefix 600 if com_pfx[-1] == ".": 601 # prefix matches all but file extension: ok 602 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 603 com_pfx = com_pfx[0:-1] 604 elif com_pfx[-1] == "/": 605 # common prefix is directory path: OK 606 pass 607 else: 608 src0_len = len(srcs[0]) 609 tgt0_len = len(tgts[0]) 610 if src0_len == com_pfx_len: 611 # source is a substring of target, OK 612 pass 613 elif tgt0_len == com_pfx_len: 614 # target is a substring of source, need to back up to 615 # avoid empty string on RHS of arrow 616 sep_idx = com_pfx.rfind(".") 617 if sep_idx != -1: 618 com_pfx = com_pfx[0:sep_idx] 619 else: 620 com_pfx = '' 621 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 622 # still splitting at file extension: ok 623 pass 624 else: 625 # probably a fluke; ignore it 626 com_pfx = '' 627 # recalculate length in case com_pfx was modified 628 com_pfx_len = len(com_pfx) 629 def fmt(files): 630 f = map(lambda s: s[com_pfx_len:], files) 631 return ', '.join(f) 632 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 633 634Export('Transform') 635 636# enable the regression script to use the termcap 637main['TERMCAP'] = termcap 638 639if GetOption('verbose'): 640 def MakeAction(action, string, *args, **kwargs): 641 return Action(action, *args, **kwargs) 642else: 643 MakeAction = Action 644 main['CCCOMSTR'] = Transform("CC") 645 main['CXXCOMSTR'] = Transform("CXX") 646 main['ASCOMSTR'] = Transform("AS") 647 main['SWIGCOMSTR'] = Transform("SWIG") 648 main['ARCOMSTR'] = Transform("AR", 0) 649 main['LINKCOMSTR'] = Transform("LINK", 0) 650 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 651 main['M4COMSTR'] = Transform("M4") 652 main['SHCCCOMSTR'] = Transform("SHCC") 653 main['SHCXXCOMSTR'] = Transform("SHCXX") 654Export('MakeAction') 655 656# Initialize the Link-Time Optimization (LTO) flags 657main['LTO_CCFLAGS'] = [] 658main['LTO_LDFLAGS'] = [] 659 660# According to the readme, tcmalloc works best if the compiler doesn't 661# assume that we're using the builtin malloc and friends. These flags 662# are compiler-specific, so we need to set them after we detect which 663# compiler we're using. 664main['TCMALLOC_CCFLAGS'] = [] 665 666CXX_version = readCommand([main['CXX'],'--version'], exception=False) 667CXX_V = readCommand([main['CXX'],'-V'], exception=False) 668 669main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 670main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 671if main['GCC'] + main['CLANG'] > 1: 672 print 'Error: How can we have two at the same time?' 673 Exit(1) 674 675# Set up default C++ compiler flags 676if main['GCC'] or main['CLANG']: 677 # As gcc and clang share many flags, do the common parts here 678 main.Append(CCFLAGS=['-pipe']) 679 main.Append(CCFLAGS=['-fno-strict-aliasing']) 680 # Enable -Wall and -Wextra and then disable the few warnings that 681 # we consistently violate 682 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 683 '-Wno-sign-compare', '-Wno-unused-parameter']) 684 # We always compile using C++11 685 main.Append(CXXFLAGS=['-std=c++11']) 686 if sys.platform.startswith('freebsd'): 687 main.Append(CCFLAGS=['-I/usr/local/include']) 688 main.Append(CXXFLAGS=['-I/usr/local/include']) 689else: 690 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 691 print "Don't know what compiler options to use for your compiler." 692 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 693 print termcap.Yellow + ' version:' + termcap.Normal, 694 if not CXX_version: 695 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 696 termcap.Normal 697 else: 698 print CXX_version.replace('\n', '<nl>') 699 print " If you're trying to use a compiler other than GCC" 700 print " or clang, there appears to be something wrong with your" 701 print " environment." 702 print " " 703 print " If you are trying to use a compiler other than those listed" 704 print " above you will need to ease fix SConstruct and " 705 print " src/SConscript to support that compiler." 706 Exit(1) 707 708if main['GCC']: 709 # Check for a supported version of gcc. >= 4.8 is chosen for its 710 # level of c++11 support. See 711 # http://gcc.gnu.org/projects/cxx0x.html for details. 712 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 713 if compareVersions(gcc_version, "4.8") < 0: 714 print 'Error: gcc version 4.8 or newer required.' 715 print ' Installed version:', gcc_version 716 Exit(1) 717 718 main['GCC_VERSION'] = gcc_version 719 720 # gcc from version 4.8 and above generates "rep; ret" instructions 721 # to avoid performance penalties on certain AMD chips. Older 722 # assemblers detect this as an error, "Error: expecting string 723 # instruction after `rep'" 724 as_version_raw = readCommand([main['AS'], '-v', '/dev/null', 725 '-o', '/dev/null'], 726 exception=False).split() 727 728 # version strings may contain extra distro-specific 729 # qualifiers, so play it safe and keep only what comes before 730 # the first hyphen 731 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None 732 733 if not as_version or compareVersions(as_version, "2.23") < 0: 734 print termcap.Yellow + termcap.Bold + \ 735 'Warning: This combination of gcc and binutils have' + \ 736 ' known incompatibilities.\n' + \ 737 ' If you encounter build problems, please update ' + \ 738 'binutils to 2.23.' + \ 739 termcap.Normal 740 741 # Make sure we warn if the user has requested to compile with the 742 # Undefined Benahvior Sanitizer and this version of gcc does not 743 # support it. 744 if GetOption('with_ubsan') and \ 745 compareVersions(gcc_version, '4.9') < 0: 746 print termcap.Yellow + termcap.Bold + \ 747 'Warning: UBSan is only supported using gcc 4.9 and later.' + \ 748 termcap.Normal 749 750 # Add the appropriate Link-Time Optimization (LTO) flags 751 # unless LTO is explicitly turned off. Note that these flags 752 # are only used by the fast target. 753 if not GetOption('no_lto'): 754 # Pass the LTO flag when compiling to produce GIMPLE 755 # output, we merely create the flags here and only append 756 # them later 757 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 758 759 # Use the same amount of jobs for LTO as we are running 760 # scons with 761 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 762 763 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 764 '-fno-builtin-realloc', '-fno-builtin-free']) 765 766 # add option to check for undeclared overrides 767 if compareVersions(gcc_version, "5.0") > 0: 768 main.Append(CCFLAGS=['-Wno-error=suggest-override']) 769 770elif main['CLANG']: 771 # Check for a supported version of clang, >= 3.1 is needed to 772 # support similar features as gcc 4.8. See 773 # http://clang.llvm.org/cxx_status.html for details 774 clang_version_re = re.compile(".* version (\d+\.\d+)") 775 clang_version_match = clang_version_re.search(CXX_version) 776 if (clang_version_match): 777 clang_version = clang_version_match.groups()[0] 778 if compareVersions(clang_version, "3.1") < 0: 779 print 'Error: clang version 3.1 or newer required.' 780 print ' Installed version:', clang_version 781 Exit(1) 782 else: 783 print 'Error: Unable to determine clang version.' 784 Exit(1) 785 786 # clang has a few additional warnings that we disable, extraneous 787 # parantheses are allowed due to Ruby's printing of the AST, 788 # finally self assignments are allowed as the generated CPU code 789 # is relying on this 790 main.Append(CCFLAGS=['-Wno-parentheses', 791 '-Wno-self-assign', 792 # Some versions of libstdc++ (4.8?) seem to 793 # use struct hash and class hash 794 # interchangeably. 795 '-Wno-mismatched-tags', 796 ]) 797 798 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 799 800 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 801 # opposed to libstdc++, as the later is dated. 802 if sys.platform == "darwin": 803 main.Append(CXXFLAGS=['-stdlib=libc++']) 804 main.Append(LIBS=['c++']) 805 806 # On FreeBSD we need libthr. 807 if sys.platform.startswith('freebsd'): 808 main.Append(LIBS=['thr']) 809 810else: 811 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 812 print "Don't know what compiler options to use for your compiler." 813 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 814 print termcap.Yellow + ' version:' + termcap.Normal, 815 if not CXX_version: 816 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 817 termcap.Normal 818 else: 819 print CXX_version.replace('\n', '<nl>') 820 print " If you're trying to use a compiler other than GCC" 821 print " or clang, there appears to be something wrong with your" 822 print " environment." 823 print " " 824 print " If you are trying to use a compiler other than those listed" 825 print " above you will need to ease fix SConstruct and " 826 print " src/SConscript to support that compiler." 827 Exit(1) 828 829# Set up common yacc/bison flags (needed for Ruby) 830main['YACCFLAGS'] = '-d' 831main['YACCHXXFILESUFFIX'] = '.hh' 832 833# Do this after we save setting back, or else we'll tack on an 834# extra 'qdo' every time we run scons. 835if main['BATCH']: 836 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 837 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 838 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 839 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 840 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 841 842if sys.platform == 'cygwin': 843 # cygwin has some header file issues... 844 main.Append(CCFLAGS=["-Wno-uninitialized"]) 845 846# Check for the protobuf compiler 847protoc_version = readCommand([main['PROTOC'], '--version'], 848 exception='').split() 849 850# First two words should be "libprotoc x.y.z" 851if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 852 print termcap.Yellow + termcap.Bold + \ 853 'Warning: Protocol buffer compiler (protoc) not found.\n' + \ 854 ' Please install protobuf-compiler for tracing support.' + \ 855 termcap.Normal 856 main['PROTOC'] = False 857else: 858 # Based on the availability of the compress stream wrappers, 859 # require 2.1.0 860 min_protoc_version = '2.1.0' 861 if compareVersions(protoc_version[1], min_protoc_version) < 0: 862 print termcap.Yellow + termcap.Bold + \ 863 'Warning: protoc version', min_protoc_version, \ 864 'or newer required.\n' + \ 865 ' Installed version:', protoc_version[1], \ 866 termcap.Normal 867 main['PROTOC'] = False 868 else: 869 # Attempt to determine the appropriate include path and 870 # library path using pkg-config, that means we also need to 871 # check for pkg-config. Note that it is possible to use 872 # protobuf without the involvement of pkg-config. Later on we 873 # check go a library config check and at that point the test 874 # will fail if libprotobuf cannot be found. 875 if readCommand(['pkg-config', '--version'], exception=''): 876 try: 877 # Attempt to establish what linking flags to add for protobuf 878 # using pkg-config 879 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 880 except: 881 print termcap.Yellow + termcap.Bold + \ 882 'Warning: pkg-config could not get protobuf flags.' + \ 883 termcap.Normal 884 885# Check for SWIG 886if not main.has_key('SWIG'): 887 print 'Error: SWIG utility not found.' 888 print ' Please install (see http://www.swig.org) and retry.' 889 Exit(1) 890 891# Check for appropriate SWIG version 892swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 893# First 3 words should be "SWIG Version x.y.z" 894if len(swig_version) < 3 or \ 895 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 896 print 'Error determining SWIG version.' 897 Exit(1) 898 899min_swig_version = '2.0.4' 900if compareVersions(swig_version[2], min_swig_version) < 0: 901 print 'Error: SWIG version', min_swig_version, 'or newer required.' 902 print ' Installed version:', swig_version[2] 903 Exit(1) 904 905# Check for known incompatibilities. The standard library shipped with 906# gcc >= 4.9 does not play well with swig versions prior to 3.0 907if main['GCC'] and compareVersions(gcc_version, '4.9') >= 0 and \ 908 compareVersions(swig_version[2], '3.0') < 0: 909 print termcap.Yellow + termcap.Bold + \ 910 'Warning: This combination of gcc and swig have' + \ 911 ' known incompatibilities.\n' + \ 912 ' If you encounter build problems, please update ' + \ 913 'swig to 3.0 or later.' + \ 914 termcap.Normal 915 916# Set up SWIG flags & scanner 917swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 918main.Append(SWIGFLAGS=swig_flags) 919 920# Check for 'timeout' from GNU coreutils. If present, regressions will 921# be run with a time limit. We require version 8.13 since we rely on 922# support for the '--foreground' option. 923if sys.platform.startswith('freebsd'): 924 timeout_lines = readCommand(['gtimeout', '--version'], 925 exception='').splitlines() 926else: 927 timeout_lines = readCommand(['timeout', '--version'], 928 exception='').splitlines() 929# Get the first line and tokenize it 930timeout_version = timeout_lines[0].split() if timeout_lines else [] 931main['TIMEOUT'] = timeout_version and \ 932 compareVersions(timeout_version[-1], '8.13') >= 0 933 934# filter out all existing swig scanners, they mess up the dependency 935# stuff for some reason 936scanners = [] 937for scanner in main['SCANNERS']: 938 skeys = scanner.skeys 939 if skeys == '.i': 940 continue 941 942 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 943 continue 944 945 scanners.append(scanner) 946 947# add the new swig scanner that we like better 948from SCons.Scanner import ClassicCPP as CPPScanner 949swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 950scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 951 952# replace the scanners list that has what we want 953main['SCANNERS'] = scanners 954 955# Add a custom Check function to test for structure members. 956def CheckMember(context, include, decl, member, include_quotes="<>"): 957 context.Message("Checking for member %s in %s..." % 958 (member, decl)) 959 text = """ 960#include %(header)s 961int main(){ 962 %(decl)s test; 963 (void)test.%(member)s; 964 return 0; 965}; 966""" % { "header" : include_quotes[0] + include + include_quotes[1], 967 "decl" : decl, 968 "member" : member, 969 } 970 971 ret = context.TryCompile(text, extension=".cc") 972 context.Result(ret) 973 return ret 974 975# Platform-specific configuration. Note again that we assume that all 976# builds under a given build root run on the same host platform. 977conf = Configure(main, 978 conf_dir = joinpath(build_root, '.scons_config'), 979 log_file = joinpath(build_root, 'scons_config.log'), 980 custom_tests = { 981 'CheckMember' : CheckMember, 982 }) 983 984# Check if we should compile a 64 bit binary on Mac OS X/Darwin 985try: 986 import platform 987 uname = platform.uname() 988 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 989 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 990 main.Append(CCFLAGS=['-arch', 'x86_64']) 991 main.Append(CFLAGS=['-arch', 'x86_64']) 992 main.Append(LINKFLAGS=['-arch', 'x86_64']) 993 main.Append(ASFLAGS=['-arch', 'x86_64']) 994except: 995 pass 996 997# Recent versions of scons substitute a "Null" object for Configure() 998# when configuration isn't necessary, e.g., if the "--help" option is 999# present. Unfortuantely this Null object always returns false, 1000# breaking all our configuration checks. We replace it with our own 1001# more optimistic null object that returns True instead. 1002if not conf: 1003 def NullCheck(*args, **kwargs): 1004 return True 1005 1006 class NullConf: 1007 def __init__(self, env): 1008 self.env = env 1009 def Finish(self): 1010 return self.env 1011 def __getattr__(self, mname): 1012 return NullCheck 1013 1014 conf = NullConf(main) 1015 1016# Cache build files in the supplied directory. 1017if main['M5_BUILD_CACHE']: 1018 print 'Using build cache located at', main['M5_BUILD_CACHE'] 1019 CacheDir(main['M5_BUILD_CACHE']) 1020 1021if not GetOption('without_python'): 1022 # Find Python include and library directories for embedding the 1023 # interpreter. We rely on python-config to resolve the appropriate 1024 # includes and linker flags. ParseConfig does not seem to understand 1025 # the more exotic linker flags such as -Xlinker and -export-dynamic so 1026 # we add them explicitly below. If you want to link in an alternate 1027 # version of python, see above for instructions on how to invoke 1028 # scons with the appropriate PATH set. 1029 # 1030 # First we check if python2-config exists, else we use python-config 1031 python_config = readCommand(['which', 'python2-config'], 1032 exception='').strip() 1033 if not os.path.exists(python_config): 1034 python_config = readCommand(['which', 'python-config'], 1035 exception='').strip() 1036 py_includes = readCommand([python_config, '--includes'], 1037 exception='').split() 1038 # Strip the -I from the include folders before adding them to the 1039 # CPPPATH 1040 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes)) 1041 1042 # Read the linker flags and split them into libraries and other link 1043 # flags. The libraries are added later through the call the CheckLib. 1044 py_ld_flags = readCommand([python_config, '--ldflags'], 1045 exception='').split() 1046 py_libs = [] 1047 for lib in py_ld_flags: 1048 if not lib.startswith('-l'): 1049 main.Append(LINKFLAGS=[lib]) 1050 else: 1051 lib = lib[2:] 1052 if lib not in py_libs: 1053 py_libs.append(lib) 1054 1055 # verify that this stuff works 1056 if not conf.CheckHeader('Python.h', '<>'): 1057 print "Error: can't find Python.h header in", py_includes 1058 print "Install Python headers (package python-dev on Ubuntu and RedHat)" 1059 Exit(1) 1060 1061 for lib in py_libs: 1062 if not conf.CheckLib(lib): 1063 print "Error: can't find library %s required by python" % lib 1064 Exit(1) 1065 1066# On Solaris you need to use libsocket for socket ops 1067if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1068 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1069 print "Can't find library with socket calls (e.g. accept())" 1070 Exit(1) 1071 1072# Check for zlib. If the check passes, libz will be automatically 1073# added to the LIBS environment variable. 1074if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 1075 print 'Error: did not find needed zlib compression library '\ 1076 'and/or zlib.h header file.' 1077 print ' Please install zlib and try again.' 1078 Exit(1) 1079 1080# If we have the protobuf compiler, also make sure we have the 1081# development libraries. If the check passes, libprotobuf will be 1082# automatically added to the LIBS environment variable. After 1083# this, we can use the HAVE_PROTOBUF flag to determine if we have 1084# got both protoc and libprotobuf available. 1085main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 1086 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 1087 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 1088 1089# If we have the compiler but not the library, print another warning. 1090if main['PROTOC'] and not main['HAVE_PROTOBUF']: 1091 print termcap.Yellow + termcap.Bold + \ 1092 'Warning: did not find protocol buffer library and/or headers.\n' + \ 1093 ' Please install libprotobuf-dev for tracing support.' + \ 1094 termcap.Normal 1095 1096# Check for librt. 1097have_posix_clock = \ 1098 conf.CheckLibWithHeader(None, 'time.h', 'C', 1099 'clock_nanosleep(0,0,NULL,NULL);') or \ 1100 conf.CheckLibWithHeader('rt', 'time.h', 'C', 1101 'clock_nanosleep(0,0,NULL,NULL);') 1102 1103have_posix_timers = \ 1104 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 1105 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 1106 1107if not GetOption('without_tcmalloc'): 1108 if conf.CheckLib('tcmalloc'): 1109 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1110 elif conf.CheckLib('tcmalloc_minimal'): 1111 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1112 else: 1113 print termcap.Yellow + termcap.Bold + \ 1114 "You can get a 12% performance improvement by "\ 1115 "installing tcmalloc (libgoogle-perftools-dev package "\ 1116 "on Ubuntu or RedHat)." + termcap.Normal 1117 1118 1119# Detect back trace implementations. The last implementation in the 1120# list will be used by default. 1121backtrace_impls = [ "none" ] 1122 1123if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', 1124 'backtrace_symbols_fd((void*)0, 0, 0);'): 1125 backtrace_impls.append("glibc") 1126elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C', 1127 'backtrace_symbols_fd((void*)0, 0, 0);'): 1128 # NetBSD and FreeBSD need libexecinfo. 1129 backtrace_impls.append("glibc") 1130 main.Append(LIBS=['execinfo']) 1131 1132if backtrace_impls[-1] == "none": 1133 default_backtrace_impl = "none" 1134 print termcap.Yellow + termcap.Bold + \ 1135 "No suitable back trace implementation found." + \ 1136 termcap.Normal 1137 1138if not have_posix_clock: 1139 print "Can't find library for POSIX clocks." 1140 1141# Check for <fenv.h> (C99 FP environment control) 1142have_fenv = conf.CheckHeader('fenv.h', '<>') 1143if not have_fenv: 1144 print "Warning: Header file <fenv.h> not found." 1145 print " This host has no IEEE FP rounding mode control." 1146 1147# Check if we should enable KVM-based hardware virtualization. The API 1148# we rely on exists since version 2.6.36 of the kernel, but somehow 1149# the KVM_API_VERSION does not reflect the change. We test for one of 1150# the types as a fall back. 1151have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 1152if not have_kvm: 1153 print "Info: Compatible header file <linux/kvm.h> not found, " \ 1154 "disabling KVM support." 1155 1156# x86 needs support for xsave. We test for the structure here since we 1157# won't be able to run new tests by the time we know which ISA we're 1158# targeting. 1159have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 1160 '#include <linux/kvm.h>') != 0 1161 1162# Check if the requested target ISA is compatible with the host 1163def is_isa_kvm_compatible(isa): 1164 try: 1165 import platform 1166 host_isa = platform.machine() 1167 except: 1168 print "Warning: Failed to determine host ISA." 1169 return False 1170 1171 if not have_posix_timers: 1172 print "Warning: Can not enable KVM, host seems to lack support " \ 1173 "for POSIX timers" 1174 return False 1175 1176 if isa == "arm": 1177 return host_isa in ( "armv7l", "aarch64" ) 1178 elif isa == "x86": 1179 if host_isa != "x86_64": 1180 return False 1181 1182 if not have_kvm_xsave: 1183 print "KVM on x86 requires xsave support in kernel headers." 1184 return False 1185 1186 return True 1187 else: 1188 return False 1189 1190 1191# Check if the exclude_host attribute is available. We want this to 1192# get accurate instruction counts in KVM. 1193main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 1194 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 1195 1196 1197###################################################################### 1198# 1199# Finish the configuration 1200# 1201main = conf.Finish() 1202 1203###################################################################### 1204# 1205# Collect all non-global variables 1206# 1207 1208# Define the universe of supported ISAs 1209all_isa_list = [ ] 1210all_gpu_isa_list = [ ] 1211Export('all_isa_list') 1212Export('all_gpu_isa_list') 1213 1214class CpuModel(object): 1215 '''The CpuModel class encapsulates everything the ISA parser needs to 1216 know about a particular CPU model.''' 1217 1218 # Dict of available CPU model objects. Accessible as CpuModel.dict. 1219 dict = {} 1220 1221 # Constructor. Automatically adds models to CpuModel.dict. 1222 def __init__(self, name, default=False): 1223 self.name = name # name of model 1224 1225 # This cpu is enabled by default 1226 self.default = default 1227 1228 # Add self to dict 1229 if name in CpuModel.dict: 1230 raise AttributeError, "CpuModel '%s' already registered" % name 1231 CpuModel.dict[name] = self 1232 1233Export('CpuModel') 1234 1235# Sticky variables get saved in the variables file so they persist from 1236# one invocation to the next (unless overridden, in which case the new 1237# value becomes sticky). 1238sticky_vars = Variables(args=ARGUMENTS) 1239Export('sticky_vars') 1240 1241# Sticky variables that should be exported 1242export_vars = [] 1243Export('export_vars') 1244 1245# For Ruby 1246all_protocols = [] 1247Export('all_protocols') 1248protocol_dirs = [] 1249Export('protocol_dirs') 1250slicc_includes = [] 1251Export('slicc_includes') 1252 1253# Walk the tree and execute all SConsopts scripts that wil add to the 1254# above variables 1255if GetOption('verbose'): 1256 print "Reading SConsopts" 1257for bdir in [ base_dir ] + extras_dir_list: 1258 if not isdir(bdir): 1259 print "Error: directory '%s' does not exist" % bdir 1260 Exit(1) 1261 for root, dirs, files in os.walk(bdir): 1262 if 'SConsopts' in files: 1263 if GetOption('verbose'): 1264 print "Reading", joinpath(root, 'SConsopts') 1265 SConscript(joinpath(root, 'SConsopts')) 1266 1267all_isa_list.sort() 1268all_gpu_isa_list.sort() 1269 1270sticky_vars.AddVariables( 1271 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 1272 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 1273 ListVariable('CPU_MODELS', 'CPU models', 1274 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 1275 sorted(CpuModel.dict.keys())), 1276 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 1277 False), 1278 BoolVariable('SS_COMPATIBLE_FP', 1279 'Make floating-point results compatible with SimpleScalar', 1280 False), 1281 BoolVariable('USE_SSE2', 1282 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1283 False), 1284 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1285 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1286 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 1287 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm), 1288 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1289 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1290 all_protocols), 1291 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1292 backtrace_impls[-1], backtrace_impls) 1293 ) 1294 1295# These variables get exported to #defines in config/*.hh (see src/SConscript). 1296export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1297 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 1298 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST'] 1299 1300################################################### 1301# 1302# Define a SCons builder for configuration flag headers. 1303# 1304################################################### 1305 1306# This function generates a config header file that #defines the 1307# variable symbol to the current variable setting (0 or 1). The source 1308# operands are the name of the variable and a Value node containing the 1309# value of the variable. 1310def build_config_file(target, source, env): 1311 (variable, value) = [s.get_contents() for s in source] 1312 f = file(str(target[0]), 'w') 1313 print >> f, '#define', variable, value 1314 f.close() 1315 return None 1316 1317# Combine the two functions into a scons Action object. 1318config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1319 1320# The emitter munges the source & target node lists to reflect what 1321# we're really doing. 1322def config_emitter(target, source, env): 1323 # extract variable name from Builder arg 1324 variable = str(target[0]) 1325 # True target is config header file 1326 target = joinpath('config', variable.lower() + '.hh') 1327 val = env[variable] 1328 if isinstance(val, bool): 1329 # Force value to 0/1 1330 val = int(val) 1331 elif isinstance(val, str): 1332 val = '"' + val + '"' 1333 1334 # Sources are variable name & value (packaged in SCons Value nodes) 1335 return ([target], [Value(variable), Value(val)]) 1336 1337config_builder = Builder(emitter = config_emitter, action = config_action) 1338 1339main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1340 1341# libelf build is shared across all configs in the build root. 1342main.SConscript('ext/libelf/SConscript', 1343 variant_dir = joinpath(build_root, 'libelf')) 1344 1345# iostream3 build is shared across all configs in the build root. 1346main.SConscript('ext/iostream3/SConscript', 1347 variant_dir = joinpath(build_root, 'iostream3')) 1348 1349# libfdt build is shared across all configs in the build root. 1350main.SConscript('ext/libfdt/SConscript', 1351 variant_dir = joinpath(build_root, 'libfdt')) 1352 1353# fputils build is shared across all configs in the build root. 1354main.SConscript('ext/fputils/SConscript', 1355 variant_dir = joinpath(build_root, 'fputils')) 1356 1357# DRAMSim2 build is shared across all configs in the build root. 1358main.SConscript('ext/dramsim2/SConscript', 1359 variant_dir = joinpath(build_root, 'dramsim2')) 1360 1361# DRAMPower build is shared across all configs in the build root. 1362main.SConscript('ext/drampower/SConscript', 1363 variant_dir = joinpath(build_root, 'drampower')) 1364 1365# nomali build is shared across all configs in the build root. 1366main.SConscript('ext/nomali/SConscript', 1367 variant_dir = joinpath(build_root, 'nomali')) 1368 1369################################################### 1370# 1371# This function is used to set up a directory with switching headers 1372# 1373################################################### 1374 1375main['ALL_ISA_LIST'] = all_isa_list 1376main['ALL_GPU_ISA_LIST'] = all_gpu_isa_list 1377all_isa_deps = {} 1378def make_switching_dir(dname, switch_headers, env): 1379 # Generate the header. target[0] is the full path of the output 1380 # header to generate. 'source' is a dummy variable, since we get the 1381 # list of ISAs from env['ALL_ISA_LIST']. 1382 def gen_switch_hdr(target, source, env): 1383 fname = str(target[0]) 1384 isa = env['TARGET_ISA'].lower() 1385 try: 1386 f = open(fname, 'w') 1387 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1388 f.close() 1389 except IOError: 1390 print "Failed to create %s" % fname 1391 raise 1392 1393 # Build SCons Action object. 'varlist' specifies env vars that this 1394 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1395 # should get re-executed. 1396 switch_hdr_action = MakeAction(gen_switch_hdr, 1397 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 1398 1399 # Instantiate actions for each header 1400 for hdr in switch_headers: 1401 env.Command(hdr, [], switch_hdr_action) 1402 1403 isa_target = Dir('.').up().name.lower().replace('_', '-') 1404 env['PHONY_BASE'] = '#'+isa_target 1405 all_isa_deps[isa_target] = None 1406 1407Export('make_switching_dir') 1408 1409def make_gpu_switching_dir(dname, switch_headers, env): 1410 # Generate the header. target[0] is the full path of the output 1411 # header to generate. 'source' is a dummy variable, since we get the 1412 # list of ISAs from env['ALL_ISA_LIST']. 1413 def gen_switch_hdr(target, source, env): 1414 fname = str(target[0]) 1415 1416 isa = env['TARGET_GPU_ISA'].lower() 1417 1418 try: 1419 f = open(fname, 'w') 1420 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1421 f.close() 1422 except IOError: 1423 print "Failed to create %s" % fname 1424 raise 1425 1426 # Build SCons Action object. 'varlist' specifies env vars that this 1427 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1428 # should get re-executed. 1429 switch_hdr_action = MakeAction(gen_switch_hdr, 1430 Transform("GENERATE"), varlist=['ALL_ISA_GPU_LIST']) 1431 1432 # Instantiate actions for each header 1433 for hdr in switch_headers: 1434 env.Command(hdr, [], switch_hdr_action) 1435 1436Export('make_gpu_switching_dir') 1437 1438# all-isas -> all-deps -> all-environs -> all_targets 1439main.Alias('#all-isas', []) 1440main.Alias('#all-deps', '#all-isas') 1441 1442# Dummy target to ensure all environments are created before telling 1443# SCons what to actually make (the command line arguments). We attach 1444# them to the dependence graph after the environments are complete. 1445ORIG_BUILD_TARGETS = list(BUILD_TARGETS) # force a copy; gets closure to work. 1446def environsComplete(target, source, env): 1447 for t in ORIG_BUILD_TARGETS: 1448 main.Depends('#all-targets', t) 1449 1450# Each build/* switching_dir attaches its *-environs target to #all-environs. 1451main.Append(BUILDERS = {'CompleteEnvirons' : 1452 Builder(action=MakeAction(environsComplete, None))}) 1453main.CompleteEnvirons('#all-environs', []) 1454 1455def doNothing(**ignored): pass 1456main.Append(BUILDERS = {'Dummy': Builder(action=MakeAction(doNothing, None))}) 1457 1458# The final target to which all the original targets ultimately get attached. 1459main.Dummy('#all-targets', '#all-environs') 1460BUILD_TARGETS[:] = ['#all-targets'] 1461 1462################################################### 1463# 1464# Define build environments for selected configurations. 1465# 1466################################################### 1467 1468for variant_path in variant_paths: 1469 if not GetOption('silent'): 1470 print "Building in", variant_path 1471 1472 # Make a copy of the build-root environment to use for this config. 1473 env = main.Clone() 1474 env['BUILDDIR'] = variant_path 1475 1476 # variant_dir is the tail component of build path, and is used to 1477 # determine the build parameters (e.g., 'ALPHA_SE') 1478 (build_root, variant_dir) = splitpath(variant_path) 1479 1480 # Set env variables according to the build directory config. 1481 sticky_vars.files = [] 1482 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1483 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1484 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1485 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1486 if isfile(current_vars_file): 1487 sticky_vars.files.append(current_vars_file) 1488 if not GetOption('silent'): 1489 print "Using saved variables file %s" % current_vars_file 1490 else: 1491 # Build dir-specific variables file doesn't exist. 1492 1493 # Make sure the directory is there so we can create it later 1494 opt_dir = dirname(current_vars_file) 1495 if not isdir(opt_dir): 1496 mkdir(opt_dir) 1497 1498 # Get default build variables from source tree. Variables are 1499 # normally determined by name of $VARIANT_DIR, but can be 1500 # overridden by '--default=' arg on command line. 1501 default = GetOption('default') 1502 opts_dir = joinpath(main.root.abspath, 'build_opts') 1503 if default: 1504 default_vars_files = [joinpath(build_root, 'variables', default), 1505 joinpath(opts_dir, default)] 1506 else: 1507 default_vars_files = [joinpath(opts_dir, variant_dir)] 1508 existing_files = filter(isfile, default_vars_files) 1509 if existing_files: 1510 default_vars_file = existing_files[0] 1511 sticky_vars.files.append(default_vars_file) 1512 print "Variables file %s not found,\n using defaults in %s" \ 1513 % (current_vars_file, default_vars_file) 1514 else: 1515 print "Error: cannot find variables file %s or " \ 1516 "default file(s) %s" \ 1517 % (current_vars_file, ' or '.join(default_vars_files)) 1518 Exit(1) 1519 1520 # Apply current variable settings to env 1521 sticky_vars.Update(env) 1522 1523 help_texts["local_vars"] += \ 1524 "Build variables for %s:\n" % variant_dir \ 1525 + sticky_vars.GenerateHelpText(env) 1526 1527 # Process variable settings. 1528 1529 if not have_fenv and env['USE_FENV']: 1530 print "Warning: <fenv.h> not available; " \ 1531 "forcing USE_FENV to False in", variant_dir + "." 1532 env['USE_FENV'] = False 1533 1534 if not env['USE_FENV']: 1535 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1536 print " FP results may deviate slightly from other platforms." 1537 1538 if env['EFENCE']: 1539 env.Append(LIBS=['efence']) 1540 1541 if env['USE_KVM']: 1542 if not have_kvm: 1543 print "Warning: Can not enable KVM, host seems to lack KVM support" 1544 env['USE_KVM'] = False 1545 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1546 print "Info: KVM support disabled due to unsupported host and " \ 1547 "target ISA combination" 1548 env['USE_KVM'] = False 1549 1550 if env['BUILD_GPU']: 1551 env.Append(CPPDEFINES=['BUILD_GPU']) 1552 1553 # Warn about missing optional functionality 1554 if env['USE_KVM']: 1555 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1556 print "Warning: perf_event headers lack support for the " \ 1557 "exclude_host attribute. KVM instruction counts will " \ 1558 "be inaccurate." 1559 1560 # Save sticky variable settings back to current variables file 1561 sticky_vars.Save(current_vars_file, env) 1562 1563 if env['USE_SSE2']: 1564 env.Append(CCFLAGS=['-msse2']) 1565 1566 # The src/SConscript file sets up the build rules in 'env' according 1567 # to the configured variables. It returns a list of environments, 1568 # one for each variant build (debug, opt, etc.) 1569 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env') 1570 1571def pairwise(iterable): 1572 "s -> (s0,s1), (s1,s2), (s2, s3), ..." 1573 a, b = itertools.tee(iterable) 1574 b.next() 1575 return itertools.izip(a, b) 1576 1577# Create false dependencies so SCons will parse ISAs, establish 1578# dependencies, and setup the build Environments serially. Either 1579# SCons (likely) and/or our SConscripts (possibly) cannot cope with -j 1580# greater than 1. It appears to be standard race condition stuff; it 1581# doesn't always fail, but usually, and the behaviors are different. 1582# Every time I tried to remove this, builds would fail in some 1583# creative new way. So, don't do that. You'll want to, though, because 1584# tests/SConscript takes a long time to make its Environments. 1585for t1, t2 in pairwise(sorted(all_isa_deps.iterkeys())): 1586 main.Depends('#%s-deps' % t2, '#%s-deps' % t1) 1587 main.Depends('#%s-environs' % t2, '#%s-environs' % t1) 1588 1589# base help text 1590Help(''' 1591Usage: scons [scons options] [build variables] [target(s)] 1592 1593Extra scons options: 1594%(options)s 1595 1596Global build variables: 1597%(global_vars)s 1598 1599%(local_vars)s 1600''' % help_texts) 1601