SConstruct revision 11925:cc1e01a99561
1# -*- mode:python -*- 2 3# Copyright (c) 2013, 2015, 2016 ARM Limited 4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81# Check for recent-enough Python and SCons versions. 82try: 83 # Really old versions of scons only take two options for the 84 # function, so check once without the revision and once with the 85 # revision, the first instance will fail for stuff other than 86 # 0.98, and the second will fail for 0.98.0 87 EnsureSConsVersion(0, 98) 88 EnsureSConsVersion(0, 98, 1) 89except SystemExit, e: 90 print """ 91For more details, see: 92 http://gem5.org/Dependencies 93""" 94 raise 95 96# We ensure the python version early because because python-config 97# requires python 2.5 98try: 99 EnsurePythonVersion(2, 5) 100except SystemExit, e: 101 print """ 102You can use a non-default installation of the Python interpreter by 103rearranging your PATH so that scons finds the non-default 'python' and 104'python-config' first. 105 106For more details, see: 107 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 108""" 109 raise 110 111# Global Python includes 112import itertools 113import os 114import re 115import shutil 116import subprocess 117import sys 118 119from os import mkdir, environ 120from os.path import abspath, basename, dirname, expanduser, normpath 121from os.path import exists, isdir, isfile 122from os.path import join as joinpath, split as splitpath 123 124# SCons includes 125import SCons 126import SCons.Node 127 128extra_python_paths = [ 129 Dir('src/python').srcnode().abspath, # gem5 includes 130 Dir('ext/ply').srcnode().abspath, # ply is used by several files 131 ] 132 133sys.path[1:1] = extra_python_paths 134 135from m5.util import compareVersions, readCommand 136from m5.util.terminal import get_termcap 137 138help_texts = { 139 "options" : "", 140 "global_vars" : "", 141 "local_vars" : "" 142} 143 144Export("help_texts") 145 146 147# There's a bug in scons in that (1) by default, the help texts from 148# AddOption() are supposed to be displayed when you type 'scons -h' 149# and (2) you can override the help displayed by 'scons -h' using the 150# Help() function, but these two features are incompatible: once 151# you've overridden the help text using Help(), there's no way to get 152# at the help texts from AddOptions. See: 153# http://scons.tigris.org/issues/show_bug.cgi?id=2356 154# http://scons.tigris.org/issues/show_bug.cgi?id=2611 155# This hack lets us extract the help text from AddOptions and 156# re-inject it via Help(). Ideally someday this bug will be fixed and 157# we can just use AddOption directly. 158def AddLocalOption(*args, **kwargs): 159 col_width = 30 160 161 help = " " + ", ".join(args) 162 if "help" in kwargs: 163 length = len(help) 164 if length >= col_width: 165 help += "\n" + " " * col_width 166 else: 167 help += " " * (col_width - length) 168 help += kwargs["help"] 169 help_texts["options"] += help + "\n" 170 171 AddOption(*args, **kwargs) 172 173AddLocalOption('--colors', dest='use_colors', action='store_true', 174 help="Add color to abbreviated scons output") 175AddLocalOption('--no-colors', dest='use_colors', action='store_false', 176 help="Don't add color to abbreviated scons output") 177AddLocalOption('--with-cxx-config', dest='with_cxx_config', 178 action='store_true', 179 help="Build with support for C++-based configuration") 180AddLocalOption('--default', dest='default', type='string', action='store', 181 help='Override which build_opts file to use for defaults') 182AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 183 help='Disable style checking hooks') 184AddLocalOption('--no-lto', dest='no_lto', action='store_true', 185 help='Disable Link-Time Optimization for fast') 186AddLocalOption('--update-ref', dest='update_ref', action='store_true', 187 help='Update test reference outputs') 188AddLocalOption('--verbose', dest='verbose', action='store_true', 189 help='Print full tool command lines') 190AddLocalOption('--without-python', dest='without_python', 191 action='store_true', 192 help='Build without Python configuration support') 193AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 194 action='store_true', 195 help='Disable linking against tcmalloc') 196AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 197 help='Build with Undefined Behavior Sanitizer if available') 198AddLocalOption('--with-asan', dest='with_asan', action='store_true', 199 help='Build with Address Sanitizer if available') 200 201termcap = get_termcap(GetOption('use_colors')) 202 203######################################################################## 204# 205# Set up the main build environment. 206# 207######################################################################## 208 209# export TERM so that clang reports errors in color 210use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 211 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC', 212 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ]) 213 214use_prefixes = [ 215 "ASAN_", # address sanitizer symbolizer path and settings 216 "CCACHE_", # ccache (caching compiler wrapper) configuration 217 "CCC_", # clang static analyzer configuration 218 "DISTCC_", # distcc (distributed compiler wrapper) configuration 219 "INCLUDE_SERVER_", # distcc pump server settings 220 "M5", # M5 configuration (e.g., path to kernels) 221 ] 222 223use_env = {} 224for key,val in sorted(os.environ.iteritems()): 225 if key in use_vars or \ 226 any([key.startswith(prefix) for prefix in use_prefixes]): 227 use_env[key] = val 228 229# Tell scons to avoid implicit command dependencies to avoid issues 230# with the param wrappes being compiled twice (see 231# http://scons.tigris.org/issues/show_bug.cgi?id=2811) 232main = Environment(ENV=use_env, IMPLICIT_COMMAND_DEPENDENCIES=0) 233main.Decider('MD5-timestamp') 234main.root = Dir(".") # The current directory (where this file lives). 235main.srcdir = Dir("src") # The source directory 236 237main_dict_keys = main.Dictionary().keys() 238 239# Check that we have a C/C++ compiler 240if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 241 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)" 242 Exit(1) 243 244# Check that swig is present 245if not 'SWIG' in main_dict_keys: 246 print "swig is not installed (package swig on Ubuntu and RedHat)" 247 Exit(1) 248 249# add useful python code PYTHONPATH so it can be used by subprocesses 250# as well 251main.AppendENVPath('PYTHONPATH', extra_python_paths) 252 253######################################################################## 254# 255# Mercurial Stuff. 256# 257# If the gem5 directory is a mercurial repository, we should do some 258# extra things. 259# 260######################################################################## 261 262hgdir = main.root.Dir(".hg") 263 264 265style_message = """ 266You're missing the gem5 style hook, which automatically checks your code 267against the gem5 style rules on %s. 268This script will now install the hook in your %s. 269Press enter to continue, or ctrl-c to abort: """ 270 271mercurial_style_message = """ 272You're missing the gem5 style hook, which automatically checks your code 273against the gem5 style rules on hg commit and qrefresh commands. 274This script will now install the hook in your .hg/hgrc file. 275Press enter to continue, or ctrl-c to abort: """ 276 277git_style_message = """ 278You're missing the gem5 style or commit message hook. These hooks help 279to ensure that your code follows gem5's style rules on git commit. 280This script will now install the hook in your .git/hooks/ directory. 281Press enter to continue, or ctrl-c to abort: """ 282 283mercurial_style_upgrade_message = """ 284Your Mercurial style hooks are not up-to-date. This script will now 285try to automatically update them. A backup of your hgrc will be saved 286in .hg/hgrc.old. 287Press enter to continue, or ctrl-c to abort: """ 288 289mercurial_style_hook = """ 290# The following lines were automatically added by gem5/SConstruct 291# to provide the gem5 style-checking hooks 292[extensions] 293hgstyle = %s/util/hgstyle.py 294 295[hooks] 296pretxncommit.style = python:hgstyle.check_style 297pre-qrefresh.style = python:hgstyle.check_style 298# End of SConstruct additions 299 300""" % (main.root.abspath) 301 302mercurial_lib_not_found = """ 303Mercurial libraries cannot be found, ignoring style hook. If 304you are a gem5 developer, please fix this and run the style 305hook. It is important. 306""" 307 308# Check for style hook and prompt for installation if it's not there. 309# Skip this if --ignore-style was specified, there's no interactive 310# terminal to prompt, or no recognized revision control system can be 311# found. 312ignore_style = GetOption('ignore_style') or not sys.stdin.isatty() 313 314# Try wire up Mercurial to the style hooks 315if not ignore_style and hgdir.exists(): 316 style_hook = True 317 style_hooks = tuple() 318 hgrc = hgdir.File('hgrc') 319 hgrc_old = hgdir.File('hgrc.old') 320 try: 321 from mercurial import ui 322 ui = ui.ui() 323 ui.readconfig(hgrc.abspath) 324 style_hooks = (ui.config('hooks', 'pretxncommit.style', None), 325 ui.config('hooks', 'pre-qrefresh.style', None)) 326 style_hook = all(style_hooks) 327 style_extension = ui.config('extensions', 'style', None) 328 except ImportError: 329 print mercurial_lib_not_found 330 331 if "python:style.check_style" in style_hooks: 332 # Try to upgrade the style hooks 333 print mercurial_style_upgrade_message 334 # continue unless user does ctrl-c/ctrl-d etc. 335 try: 336 raw_input() 337 except: 338 print "Input exception, exiting scons.\n" 339 sys.exit(1) 340 shutil.copyfile(hgrc.abspath, hgrc_old.abspath) 341 re_style_hook = re.compile(r"^([^=#]+)\.style\s*=\s*([^#\s]+).*") 342 re_style_extension = re.compile("style\s*=\s*([^#\s]+).*") 343 old, new = open(hgrc_old.abspath, 'r'), open(hgrc.abspath, 'w') 344 for l in old: 345 m_hook = re_style_hook.match(l) 346 m_ext = re_style_extension.match(l) 347 if m_hook: 348 hook, check = m_hook.groups() 349 if check != "python:style.check_style": 350 print "Warning: %s.style is using a non-default " \ 351 "checker: %s" % (hook, check) 352 if hook not in ("pretxncommit", "pre-qrefresh"): 353 print "Warning: Updating unknown style hook: %s" % hook 354 355 l = "%s.style = python:hgstyle.check_style\n" % hook 356 elif m_ext and m_ext.group(1) == style_extension: 357 l = "hgstyle = %s/util/hgstyle.py\n" % main.root.abspath 358 359 new.write(l) 360 elif not style_hook: 361 print mercurial_style_message, 362 # continue unless user does ctrl-c/ctrl-d etc. 363 try: 364 raw_input() 365 except: 366 print "Input exception, exiting scons.\n" 367 sys.exit(1) 368 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 369 print "Adding style hook to", hgrc_path, "\n" 370 try: 371 with open(hgrc_path, 'a') as f: 372 f.write(mercurial_style_hook) 373 except: 374 print "Error updating", hgrc_path 375 sys.exit(1) 376 377def install_git_style_hooks(): 378 try: 379 gitdir = Dir(readCommand( 380 ["git", "rev-parse", "--git-dir"]).strip("\n")) 381 except Exception, e: 382 print "Warning: Failed to find git repo directory: %s" % e 383 return 384 385 git_hooks = gitdir.Dir("hooks") 386 def hook_exists(hook_name): 387 hook = git_hooks.File(hook_name) 388 return hook.exists() 389 390 def hook_install(hook_name, script): 391 hook = git_hooks.File(hook_name) 392 if hook.exists(): 393 print "Warning: Can't install %s, hook already exists." % hook_name 394 return 395 396 if not git_hooks.exists(): 397 mkdir(git_hooks.get_abspath()) 398 399 # Use a relative symlink if the hooks live in the source directory 400 if hook.is_under(main.root): 401 script_path = os.path.relpath( 402 script.get_abspath(), 403 hook.Dir(".").get_abspath()) 404 else: 405 script_path = script.get_abspath() 406 407 try: 408 os.symlink(script_path, hook.get_abspath()) 409 except: 410 print "Error updating git %s hook" % hook_name 411 raise 412 413 if hook_exists("pre-commit") and hook_exists("commit-msg"): 414 return 415 416 print git_style_message, 417 try: 418 raw_input() 419 except: 420 print "Input exception, exiting scons.\n" 421 sys.exit(1) 422 423 git_style_script = File("util/git-pre-commit.py") 424 git_msg_script = File("ext/git-commit-msg") 425 426 hook_install("pre-commit", git_style_script) 427 hook_install("commit-msg", git_msg_script) 428 429# Try to wire up git to the style hooks 430if not ignore_style and main.root.Entry(".git").exists(): 431 install_git_style_hooks() 432 433################################################### 434# 435# Figure out which configurations to set up based on the path(s) of 436# the target(s). 437# 438################################################### 439 440# Find default configuration & binary. 441Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 442 443# helper function: find last occurrence of element in list 444def rfind(l, elt, offs = -1): 445 for i in range(len(l)+offs, 0, -1): 446 if l[i] == elt: 447 return i 448 raise ValueError, "element not found" 449 450# Take a list of paths (or SCons Nodes) and return a list with all 451# paths made absolute and ~-expanded. Paths will be interpreted 452# relative to the launch directory unless a different root is provided 453def makePathListAbsolute(path_list, root=GetLaunchDir()): 454 return [abspath(joinpath(root, expanduser(str(p)))) 455 for p in path_list] 456 457# Each target must have 'build' in the interior of the path; the 458# directory below this will determine the build parameters. For 459# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 460# recognize that ALPHA_SE specifies the configuration because it 461# follow 'build' in the build path. 462 463# The funky assignment to "[:]" is needed to replace the list contents 464# in place rather than reassign the symbol to a new list, which 465# doesn't work (obviously!). 466BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 467 468# Generate a list of the unique build roots and configs that the 469# collected targets reference. 470variant_paths = [] 471build_root = None 472for t in BUILD_TARGETS: 473 path_dirs = t.split('/') 474 try: 475 build_top = rfind(path_dirs, 'build', -2) 476 except: 477 print "Error: no non-leaf 'build' dir found on target path", t 478 Exit(1) 479 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 480 if not build_root: 481 build_root = this_build_root 482 else: 483 if this_build_root != build_root: 484 print "Error: build targets not under same build root\n"\ 485 " %s\n %s" % (build_root, this_build_root) 486 Exit(1) 487 variant_path = joinpath('/',*path_dirs[:build_top+2]) 488 if variant_path not in variant_paths: 489 variant_paths.append(variant_path) 490 491# Make sure build_root exists (might not if this is the first build there) 492if not isdir(build_root): 493 mkdir(build_root) 494main['BUILDROOT'] = build_root 495 496Export('main') 497 498main.SConsignFile(joinpath(build_root, "sconsign")) 499 500# Default duplicate option is to use hard links, but this messes up 501# when you use emacs to edit a file in the target dir, as emacs moves 502# file to file~ then copies to file, breaking the link. Symbolic 503# (soft) links work better. 504main.SetOption('duplicate', 'soft-copy') 505 506# 507# Set up global sticky variables... these are common to an entire build 508# tree (not specific to a particular build like ALPHA_SE) 509# 510 511global_vars_file = joinpath(build_root, 'variables.global') 512 513global_vars = Variables(global_vars_file, args=ARGUMENTS) 514 515global_vars.AddVariables( 516 ('CC', 'C compiler', environ.get('CC', main['CC'])), 517 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 518 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 519 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 520 ('BATCH', 'Use batch pool for build and tests', False), 521 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 522 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 523 ('EXTRAS', 'Add extra directories to the compilation', '') 524 ) 525 526# Update main environment with values from ARGUMENTS & global_vars_file 527global_vars.Update(main) 528help_texts["global_vars"] += global_vars.GenerateHelpText(main) 529 530# Save sticky variable settings back to current variables file 531global_vars.Save(global_vars_file, main) 532 533# Parse EXTRAS variable to build list of all directories where we're 534# look for sources etc. This list is exported as extras_dir_list. 535base_dir = main.srcdir.abspath 536if main['EXTRAS']: 537 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 538else: 539 extras_dir_list = [] 540 541Export('base_dir') 542Export('extras_dir_list') 543 544# the ext directory should be on the #includes path 545main.Append(CPPPATH=[Dir('ext')]) 546 547def strip_build_path(path, env): 548 path = str(path) 549 variant_base = env['BUILDROOT'] + os.path.sep 550 if path.startswith(variant_base): 551 path = path[len(variant_base):] 552 elif path.startswith('build/'): 553 path = path[6:] 554 return path 555 556# Generate a string of the form: 557# common/path/prefix/src1, src2 -> tgt1, tgt2 558# to print while building. 559class Transform(object): 560 # all specific color settings should be here and nowhere else 561 tool_color = termcap.Normal 562 pfx_color = termcap.Yellow 563 srcs_color = termcap.Yellow + termcap.Bold 564 arrow_color = termcap.Blue + termcap.Bold 565 tgts_color = termcap.Yellow + termcap.Bold 566 567 def __init__(self, tool, max_sources=99): 568 self.format = self.tool_color + (" [%8s] " % tool) \ 569 + self.pfx_color + "%s" \ 570 + self.srcs_color + "%s" \ 571 + self.arrow_color + " -> " \ 572 + self.tgts_color + "%s" \ 573 + termcap.Normal 574 self.max_sources = max_sources 575 576 def __call__(self, target, source, env, for_signature=None): 577 # truncate source list according to max_sources param 578 source = source[0:self.max_sources] 579 def strip(f): 580 return strip_build_path(str(f), env) 581 if len(source) > 0: 582 srcs = map(strip, source) 583 else: 584 srcs = [''] 585 tgts = map(strip, target) 586 # surprisingly, os.path.commonprefix is a dumb char-by-char string 587 # operation that has nothing to do with paths. 588 com_pfx = os.path.commonprefix(srcs + tgts) 589 com_pfx_len = len(com_pfx) 590 if com_pfx: 591 # do some cleanup and sanity checking on common prefix 592 if com_pfx[-1] == ".": 593 # prefix matches all but file extension: ok 594 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 595 com_pfx = com_pfx[0:-1] 596 elif com_pfx[-1] == "/": 597 # common prefix is directory path: OK 598 pass 599 else: 600 src0_len = len(srcs[0]) 601 tgt0_len = len(tgts[0]) 602 if src0_len == com_pfx_len: 603 # source is a substring of target, OK 604 pass 605 elif tgt0_len == com_pfx_len: 606 # target is a substring of source, need to back up to 607 # avoid empty string on RHS of arrow 608 sep_idx = com_pfx.rfind(".") 609 if sep_idx != -1: 610 com_pfx = com_pfx[0:sep_idx] 611 else: 612 com_pfx = '' 613 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 614 # still splitting at file extension: ok 615 pass 616 else: 617 # probably a fluke; ignore it 618 com_pfx = '' 619 # recalculate length in case com_pfx was modified 620 com_pfx_len = len(com_pfx) 621 def fmt(files): 622 f = map(lambda s: s[com_pfx_len:], files) 623 return ', '.join(f) 624 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 625 626Export('Transform') 627 628# enable the regression script to use the termcap 629main['TERMCAP'] = termcap 630 631if GetOption('verbose'): 632 def MakeAction(action, string, *args, **kwargs): 633 return Action(action, *args, **kwargs) 634else: 635 MakeAction = Action 636 main['CCCOMSTR'] = Transform("CC") 637 main['CXXCOMSTR'] = Transform("CXX") 638 main['ASCOMSTR'] = Transform("AS") 639 main['SWIGCOMSTR'] = Transform("SWIG") 640 main['ARCOMSTR'] = Transform("AR", 0) 641 main['LINKCOMSTR'] = Transform("LINK", 0) 642 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 643 main['M4COMSTR'] = Transform("M4") 644 main['SHCCCOMSTR'] = Transform("SHCC") 645 main['SHCXXCOMSTR'] = Transform("SHCXX") 646Export('MakeAction') 647 648# Initialize the Link-Time Optimization (LTO) flags 649main['LTO_CCFLAGS'] = [] 650main['LTO_LDFLAGS'] = [] 651 652# According to the readme, tcmalloc works best if the compiler doesn't 653# assume that we're using the builtin malloc and friends. These flags 654# are compiler-specific, so we need to set them after we detect which 655# compiler we're using. 656main['TCMALLOC_CCFLAGS'] = [] 657 658CXX_version = readCommand([main['CXX'],'--version'], exception=False) 659CXX_V = readCommand([main['CXX'],'-V'], exception=False) 660 661main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 662main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 663if main['GCC'] + main['CLANG'] > 1: 664 print 'Error: How can we have two at the same time?' 665 Exit(1) 666 667# Set up default C++ compiler flags 668if main['GCC'] or main['CLANG']: 669 # As gcc and clang share many flags, do the common parts here 670 main.Append(CCFLAGS=['-pipe']) 671 main.Append(CCFLAGS=['-fno-strict-aliasing']) 672 # Enable -Wall and -Wextra and then disable the few warnings that 673 # we consistently violate 674 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 675 '-Wno-sign-compare', '-Wno-unused-parameter']) 676 # We always compile using C++11 677 main.Append(CXXFLAGS=['-std=c++11']) 678 if sys.platform.startswith('freebsd'): 679 main.Append(CCFLAGS=['-I/usr/local/include']) 680 main.Append(CXXFLAGS=['-I/usr/local/include']) 681else: 682 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 683 print "Don't know what compiler options to use for your compiler." 684 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 685 print termcap.Yellow + ' version:' + termcap.Normal, 686 if not CXX_version: 687 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 688 termcap.Normal 689 else: 690 print CXX_version.replace('\n', '<nl>') 691 print " If you're trying to use a compiler other than GCC" 692 print " or clang, there appears to be something wrong with your" 693 print " environment." 694 print " " 695 print " If you are trying to use a compiler other than those listed" 696 print " above you will need to ease fix SConstruct and " 697 print " src/SConscript to support that compiler." 698 Exit(1) 699 700if main['GCC']: 701 # Check for a supported version of gcc. >= 4.8 is chosen for its 702 # level of c++11 support. See 703 # http://gcc.gnu.org/projects/cxx0x.html for details. 704 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 705 if compareVersions(gcc_version, "4.8") < 0: 706 print 'Error: gcc version 4.8 or newer required.' 707 print ' Installed version:', gcc_version 708 Exit(1) 709 710 main['GCC_VERSION'] = gcc_version 711 712 # gcc from version 4.8 and above generates "rep; ret" instructions 713 # to avoid performance penalties on certain AMD chips. Older 714 # assemblers detect this as an error, "Error: expecting string 715 # instruction after `rep'" 716 as_version_raw = readCommand([main['AS'], '-v', '/dev/null', 717 '-o', '/dev/null'], 718 exception=False).split() 719 720 # version strings may contain extra distro-specific 721 # qualifiers, so play it safe and keep only what comes before 722 # the first hyphen 723 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None 724 725 if not as_version or compareVersions(as_version, "2.23") < 0: 726 print termcap.Yellow + termcap.Bold + \ 727 'Warning: This combination of gcc and binutils have' + \ 728 ' known incompatibilities.\n' + \ 729 ' If you encounter build problems, please update ' + \ 730 'binutils to 2.23.' + \ 731 termcap.Normal 732 733 # Make sure we warn if the user has requested to compile with the 734 # Undefined Benahvior Sanitizer and this version of gcc does not 735 # support it. 736 if GetOption('with_ubsan') and \ 737 compareVersions(gcc_version, '4.9') < 0: 738 print termcap.Yellow + termcap.Bold + \ 739 'Warning: UBSan is only supported using gcc 4.9 and later.' + \ 740 termcap.Normal 741 742 # Add the appropriate Link-Time Optimization (LTO) flags 743 # unless LTO is explicitly turned off. Note that these flags 744 # are only used by the fast target. 745 if not GetOption('no_lto'): 746 # Pass the LTO flag when compiling to produce GIMPLE 747 # output, we merely create the flags here and only append 748 # them later 749 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 750 751 # Use the same amount of jobs for LTO as we are running 752 # scons with 753 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 754 755 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 756 '-fno-builtin-realloc', '-fno-builtin-free']) 757 758 # add option to check for undeclared overrides 759 if compareVersions(gcc_version, "5.0") > 0: 760 main.Append(CCFLAGS=['-Wno-error=suggest-override']) 761 762elif main['CLANG']: 763 # Check for a supported version of clang, >= 3.1 is needed to 764 # support similar features as gcc 4.8. See 765 # http://clang.llvm.org/cxx_status.html for details 766 clang_version_re = re.compile(".* version (\d+\.\d+)") 767 clang_version_match = clang_version_re.search(CXX_version) 768 if (clang_version_match): 769 clang_version = clang_version_match.groups()[0] 770 if compareVersions(clang_version, "3.1") < 0: 771 print 'Error: clang version 3.1 or newer required.' 772 print ' Installed version:', clang_version 773 Exit(1) 774 else: 775 print 'Error: Unable to determine clang version.' 776 Exit(1) 777 778 # clang has a few additional warnings that we disable, extraneous 779 # parantheses are allowed due to Ruby's printing of the AST, 780 # finally self assignments are allowed as the generated CPU code 781 # is relying on this 782 main.Append(CCFLAGS=['-Wno-parentheses', 783 '-Wno-self-assign', 784 # Some versions of libstdc++ (4.8?) seem to 785 # use struct hash and class hash 786 # interchangeably. 787 '-Wno-mismatched-tags', 788 ]) 789 790 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 791 792 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 793 # opposed to libstdc++, as the later is dated. 794 if sys.platform == "darwin": 795 main.Append(CXXFLAGS=['-stdlib=libc++']) 796 main.Append(LIBS=['c++']) 797 798 # On FreeBSD we need libthr. 799 if sys.platform.startswith('freebsd'): 800 main.Append(LIBS=['thr']) 801 802else: 803 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 804 print "Don't know what compiler options to use for your compiler." 805 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 806 print termcap.Yellow + ' version:' + termcap.Normal, 807 if not CXX_version: 808 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 809 termcap.Normal 810 else: 811 print CXX_version.replace('\n', '<nl>') 812 print " If you're trying to use a compiler other than GCC" 813 print " or clang, there appears to be something wrong with your" 814 print " environment." 815 print " " 816 print " If you are trying to use a compiler other than those listed" 817 print " above you will need to ease fix SConstruct and " 818 print " src/SConscript to support that compiler." 819 Exit(1) 820 821# Set up common yacc/bison flags (needed for Ruby) 822main['YACCFLAGS'] = '-d' 823main['YACCHXXFILESUFFIX'] = '.hh' 824 825# Do this after we save setting back, or else we'll tack on an 826# extra 'qdo' every time we run scons. 827if main['BATCH']: 828 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 829 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 830 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 831 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 832 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 833 834if sys.platform == 'cygwin': 835 # cygwin has some header file issues... 836 main.Append(CCFLAGS=["-Wno-uninitialized"]) 837 838# Check for the protobuf compiler 839protoc_version = readCommand([main['PROTOC'], '--version'], 840 exception='').split() 841 842# First two words should be "libprotoc x.y.z" 843if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 844 print termcap.Yellow + termcap.Bold + \ 845 'Warning: Protocol buffer compiler (protoc) not found.\n' + \ 846 ' Please install protobuf-compiler for tracing support.' + \ 847 termcap.Normal 848 main['PROTOC'] = False 849else: 850 # Based on the availability of the compress stream wrappers, 851 # require 2.1.0 852 min_protoc_version = '2.1.0' 853 if compareVersions(protoc_version[1], min_protoc_version) < 0: 854 print termcap.Yellow + termcap.Bold + \ 855 'Warning: protoc version', min_protoc_version, \ 856 'or newer required.\n' + \ 857 ' Installed version:', protoc_version[1], \ 858 termcap.Normal 859 main['PROTOC'] = False 860 else: 861 # Attempt to determine the appropriate include path and 862 # library path using pkg-config, that means we also need to 863 # check for pkg-config. Note that it is possible to use 864 # protobuf without the involvement of pkg-config. Later on we 865 # check go a library config check and at that point the test 866 # will fail if libprotobuf cannot be found. 867 if readCommand(['pkg-config', '--version'], exception=''): 868 try: 869 # Attempt to establish what linking flags to add for protobuf 870 # using pkg-config 871 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 872 except: 873 print termcap.Yellow + termcap.Bold + \ 874 'Warning: pkg-config could not get protobuf flags.' + \ 875 termcap.Normal 876 877# Check for SWIG 878if not main.has_key('SWIG'): 879 print 'Error: SWIG utility not found.' 880 print ' Please install (see http://www.swig.org) and retry.' 881 Exit(1) 882 883# Check for appropriate SWIG version 884swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 885# First 3 words should be "SWIG Version x.y.z" 886if len(swig_version) < 3 or \ 887 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 888 print 'Error determining SWIG version.' 889 Exit(1) 890 891min_swig_version = '2.0.4' 892if compareVersions(swig_version[2], min_swig_version) < 0: 893 print 'Error: SWIG version', min_swig_version, 'or newer required.' 894 print ' Installed version:', swig_version[2] 895 Exit(1) 896 897# Check for known incompatibilities. The standard library shipped with 898# gcc >= 4.9 does not play well with swig versions prior to 3.0 899if main['GCC'] and compareVersions(gcc_version, '4.9') >= 0 and \ 900 compareVersions(swig_version[2], '3.0') < 0: 901 print termcap.Yellow + termcap.Bold + \ 902 'Warning: This combination of gcc and swig have' + \ 903 ' known incompatibilities.\n' + \ 904 ' If you encounter build problems, please update ' + \ 905 'swig to 3.0 or later.' + \ 906 termcap.Normal 907 908# Set up SWIG flags & scanner 909swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 910main.Append(SWIGFLAGS=swig_flags) 911 912# Check for 'timeout' from GNU coreutils. If present, regressions will 913# be run with a time limit. We require version 8.13 since we rely on 914# support for the '--foreground' option. 915if sys.platform.startswith('freebsd'): 916 timeout_lines = readCommand(['gtimeout', '--version'], 917 exception='').splitlines() 918else: 919 timeout_lines = readCommand(['timeout', '--version'], 920 exception='').splitlines() 921# Get the first line and tokenize it 922timeout_version = timeout_lines[0].split() if timeout_lines else [] 923main['TIMEOUT'] = timeout_version and \ 924 compareVersions(timeout_version[-1], '8.13') >= 0 925 926# filter out all existing swig scanners, they mess up the dependency 927# stuff for some reason 928scanners = [] 929for scanner in main['SCANNERS']: 930 skeys = scanner.skeys 931 if skeys == '.i': 932 continue 933 934 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 935 continue 936 937 scanners.append(scanner) 938 939# add the new swig scanner that we like better 940from SCons.Scanner import ClassicCPP as CPPScanner 941swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 942scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 943 944# replace the scanners list that has what we want 945main['SCANNERS'] = scanners 946 947# Add a custom Check function to test for structure members. 948def CheckMember(context, include, decl, member, include_quotes="<>"): 949 context.Message("Checking for member %s in %s..." % 950 (member, decl)) 951 text = """ 952#include %(header)s 953int main(){ 954 %(decl)s test; 955 (void)test.%(member)s; 956 return 0; 957}; 958""" % { "header" : include_quotes[0] + include + include_quotes[1], 959 "decl" : decl, 960 "member" : member, 961 } 962 963 ret = context.TryCompile(text, extension=".cc") 964 context.Result(ret) 965 return ret 966 967# Platform-specific configuration. Note again that we assume that all 968# builds under a given build root run on the same host platform. 969conf = Configure(main, 970 conf_dir = joinpath(build_root, '.scons_config'), 971 log_file = joinpath(build_root, 'scons_config.log'), 972 custom_tests = { 973 'CheckMember' : CheckMember, 974 }) 975 976# Check if we should compile a 64 bit binary on Mac OS X/Darwin 977try: 978 import platform 979 uname = platform.uname() 980 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 981 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 982 main.Append(CCFLAGS=['-arch', 'x86_64']) 983 main.Append(CFLAGS=['-arch', 'x86_64']) 984 main.Append(LINKFLAGS=['-arch', 'x86_64']) 985 main.Append(ASFLAGS=['-arch', 'x86_64']) 986except: 987 pass 988 989# Recent versions of scons substitute a "Null" object for Configure() 990# when configuration isn't necessary, e.g., if the "--help" option is 991# present. Unfortuantely this Null object always returns false, 992# breaking all our configuration checks. We replace it with our own 993# more optimistic null object that returns True instead. 994if not conf: 995 def NullCheck(*args, **kwargs): 996 return True 997 998 class NullConf: 999 def __init__(self, env): 1000 self.env = env 1001 def Finish(self): 1002 return self.env 1003 def __getattr__(self, mname): 1004 return NullCheck 1005 1006 conf = NullConf(main) 1007 1008# Cache build files in the supplied directory. 1009if main['M5_BUILD_CACHE']: 1010 print 'Using build cache located at', main['M5_BUILD_CACHE'] 1011 CacheDir(main['M5_BUILD_CACHE']) 1012 1013if not GetOption('without_python'): 1014 # Find Python include and library directories for embedding the 1015 # interpreter. We rely on python-config to resolve the appropriate 1016 # includes and linker flags. ParseConfig does not seem to understand 1017 # the more exotic linker flags such as -Xlinker and -export-dynamic so 1018 # we add them explicitly below. If you want to link in an alternate 1019 # version of python, see above for instructions on how to invoke 1020 # scons with the appropriate PATH set. 1021 # 1022 # First we check if python2-config exists, else we use python-config 1023 python_config = readCommand(['which', 'python2-config'], 1024 exception='').strip() 1025 if not os.path.exists(python_config): 1026 python_config = readCommand(['which', 'python-config'], 1027 exception='').strip() 1028 py_includes = readCommand([python_config, '--includes'], 1029 exception='').split() 1030 # Strip the -I from the include folders before adding them to the 1031 # CPPPATH 1032 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes)) 1033 1034 # Read the linker flags and split them into libraries and other link 1035 # flags. The libraries are added later through the call the CheckLib. 1036 py_ld_flags = readCommand([python_config, '--ldflags'], 1037 exception='').split() 1038 py_libs = [] 1039 for lib in py_ld_flags: 1040 if not lib.startswith('-l'): 1041 main.Append(LINKFLAGS=[lib]) 1042 else: 1043 lib = lib[2:] 1044 if lib not in py_libs: 1045 py_libs.append(lib) 1046 1047 # verify that this stuff works 1048 if not conf.CheckHeader('Python.h', '<>'): 1049 print "Error: can't find Python.h header in", py_includes 1050 print "Install Python headers (package python-dev on Ubuntu and RedHat)" 1051 Exit(1) 1052 1053 for lib in py_libs: 1054 if not conf.CheckLib(lib): 1055 print "Error: can't find library %s required by python" % lib 1056 Exit(1) 1057 1058# On Solaris you need to use libsocket for socket ops 1059if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1060 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1061 print "Can't find library with socket calls (e.g. accept())" 1062 Exit(1) 1063 1064# Check for zlib. If the check passes, libz will be automatically 1065# added to the LIBS environment variable. 1066if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 1067 print 'Error: did not find needed zlib compression library '\ 1068 'and/or zlib.h header file.' 1069 print ' Please install zlib and try again.' 1070 Exit(1) 1071 1072# If we have the protobuf compiler, also make sure we have the 1073# development libraries. If the check passes, libprotobuf will be 1074# automatically added to the LIBS environment variable. After 1075# this, we can use the HAVE_PROTOBUF flag to determine if we have 1076# got both protoc and libprotobuf available. 1077main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 1078 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 1079 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 1080 1081# If we have the compiler but not the library, print another warning. 1082if main['PROTOC'] and not main['HAVE_PROTOBUF']: 1083 print termcap.Yellow + termcap.Bold + \ 1084 'Warning: did not find protocol buffer library and/or headers.\n' + \ 1085 ' Please install libprotobuf-dev for tracing support.' + \ 1086 termcap.Normal 1087 1088# Check for librt. 1089have_posix_clock = \ 1090 conf.CheckLibWithHeader(None, 'time.h', 'C', 1091 'clock_nanosleep(0,0,NULL,NULL);') or \ 1092 conf.CheckLibWithHeader('rt', 'time.h', 'C', 1093 'clock_nanosleep(0,0,NULL,NULL);') 1094 1095have_posix_timers = \ 1096 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 1097 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 1098 1099if not GetOption('without_tcmalloc'): 1100 if conf.CheckLib('tcmalloc'): 1101 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1102 elif conf.CheckLib('tcmalloc_minimal'): 1103 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1104 else: 1105 print termcap.Yellow + termcap.Bold + \ 1106 "You can get a 12% performance improvement by "\ 1107 "installing tcmalloc (libgoogle-perftools-dev package "\ 1108 "on Ubuntu or RedHat)." + termcap.Normal 1109 1110 1111# Detect back trace implementations. The last implementation in the 1112# list will be used by default. 1113backtrace_impls = [ "none" ] 1114 1115if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', 1116 'backtrace_symbols_fd((void*)0, 0, 0);'): 1117 backtrace_impls.append("glibc") 1118elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C', 1119 'backtrace_symbols_fd((void*)0, 0, 0);'): 1120 # NetBSD and FreeBSD need libexecinfo. 1121 backtrace_impls.append("glibc") 1122 main.Append(LIBS=['execinfo']) 1123 1124if backtrace_impls[-1] == "none": 1125 default_backtrace_impl = "none" 1126 print termcap.Yellow + termcap.Bold + \ 1127 "No suitable back trace implementation found." + \ 1128 termcap.Normal 1129 1130if not have_posix_clock: 1131 print "Can't find library for POSIX clocks." 1132 1133# Check for <fenv.h> (C99 FP environment control) 1134have_fenv = conf.CheckHeader('fenv.h', '<>') 1135if not have_fenv: 1136 print "Warning: Header file <fenv.h> not found." 1137 print " This host has no IEEE FP rounding mode control." 1138 1139# Check if we should enable KVM-based hardware virtualization. The API 1140# we rely on exists since version 2.6.36 of the kernel, but somehow 1141# the KVM_API_VERSION does not reflect the change. We test for one of 1142# the types as a fall back. 1143have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 1144if not have_kvm: 1145 print "Info: Compatible header file <linux/kvm.h> not found, " \ 1146 "disabling KVM support." 1147 1148# x86 needs support for xsave. We test for the structure here since we 1149# won't be able to run new tests by the time we know which ISA we're 1150# targeting. 1151have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 1152 '#include <linux/kvm.h>') != 0 1153 1154# Check if the requested target ISA is compatible with the host 1155def is_isa_kvm_compatible(isa): 1156 try: 1157 import platform 1158 host_isa = platform.machine() 1159 except: 1160 print "Warning: Failed to determine host ISA." 1161 return False 1162 1163 if not have_posix_timers: 1164 print "Warning: Can not enable KVM, host seems to lack support " \ 1165 "for POSIX timers" 1166 return False 1167 1168 if isa == "arm": 1169 return host_isa in ( "armv7l", "aarch64" ) 1170 elif isa == "x86": 1171 if host_isa != "x86_64": 1172 return False 1173 1174 if not have_kvm_xsave: 1175 print "KVM on x86 requires xsave support in kernel headers." 1176 return False 1177 1178 return True 1179 else: 1180 return False 1181 1182 1183# Check if the exclude_host attribute is available. We want this to 1184# get accurate instruction counts in KVM. 1185main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 1186 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 1187 1188 1189###################################################################### 1190# 1191# Finish the configuration 1192# 1193main = conf.Finish() 1194 1195###################################################################### 1196# 1197# Collect all non-global variables 1198# 1199 1200# Define the universe of supported ISAs 1201all_isa_list = [ ] 1202all_gpu_isa_list = [ ] 1203Export('all_isa_list') 1204Export('all_gpu_isa_list') 1205 1206class CpuModel(object): 1207 '''The CpuModel class encapsulates everything the ISA parser needs to 1208 know about a particular CPU model.''' 1209 1210 # Dict of available CPU model objects. Accessible as CpuModel.dict. 1211 dict = {} 1212 1213 # Constructor. Automatically adds models to CpuModel.dict. 1214 def __init__(self, name, default=False): 1215 self.name = name # name of model 1216 1217 # This cpu is enabled by default 1218 self.default = default 1219 1220 # Add self to dict 1221 if name in CpuModel.dict: 1222 raise AttributeError, "CpuModel '%s' already registered" % name 1223 CpuModel.dict[name] = self 1224 1225Export('CpuModel') 1226 1227# Sticky variables get saved in the variables file so they persist from 1228# one invocation to the next (unless overridden, in which case the new 1229# value becomes sticky). 1230sticky_vars = Variables(args=ARGUMENTS) 1231Export('sticky_vars') 1232 1233# Sticky variables that should be exported 1234export_vars = [] 1235Export('export_vars') 1236 1237# For Ruby 1238all_protocols = [] 1239Export('all_protocols') 1240protocol_dirs = [] 1241Export('protocol_dirs') 1242slicc_includes = [] 1243Export('slicc_includes') 1244 1245# Walk the tree and execute all SConsopts scripts that wil add to the 1246# above variables 1247if GetOption('verbose'): 1248 print "Reading SConsopts" 1249for bdir in [ base_dir ] + extras_dir_list: 1250 if not isdir(bdir): 1251 print "Error: directory '%s' does not exist" % bdir 1252 Exit(1) 1253 for root, dirs, files in os.walk(bdir): 1254 if 'SConsopts' in files: 1255 if GetOption('verbose'): 1256 print "Reading", joinpath(root, 'SConsopts') 1257 SConscript(joinpath(root, 'SConsopts')) 1258 1259all_isa_list.sort() 1260all_gpu_isa_list.sort() 1261 1262sticky_vars.AddVariables( 1263 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 1264 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 1265 ListVariable('CPU_MODELS', 'CPU models', 1266 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 1267 sorted(CpuModel.dict.keys())), 1268 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 1269 False), 1270 BoolVariable('SS_COMPATIBLE_FP', 1271 'Make floating-point results compatible with SimpleScalar', 1272 False), 1273 BoolVariable('USE_SSE2', 1274 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1275 False), 1276 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1277 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1278 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 1279 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm), 1280 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1281 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1282 all_protocols), 1283 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1284 backtrace_impls[-1], backtrace_impls) 1285 ) 1286 1287# These variables get exported to #defines in config/*.hh (see src/SConscript). 1288export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1289 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 1290 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST'] 1291 1292################################################### 1293# 1294# Define a SCons builder for configuration flag headers. 1295# 1296################################################### 1297 1298# This function generates a config header file that #defines the 1299# variable symbol to the current variable setting (0 or 1). The source 1300# operands are the name of the variable and a Value node containing the 1301# value of the variable. 1302def build_config_file(target, source, env): 1303 (variable, value) = [s.get_contents() for s in source] 1304 f = file(str(target[0]), 'w') 1305 print >> f, '#define', variable, value 1306 f.close() 1307 return None 1308 1309# Combine the two functions into a scons Action object. 1310config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1311 1312# The emitter munges the source & target node lists to reflect what 1313# we're really doing. 1314def config_emitter(target, source, env): 1315 # extract variable name from Builder arg 1316 variable = str(target[0]) 1317 # True target is config header file 1318 target = joinpath('config', variable.lower() + '.hh') 1319 val = env[variable] 1320 if isinstance(val, bool): 1321 # Force value to 0/1 1322 val = int(val) 1323 elif isinstance(val, str): 1324 val = '"' + val + '"' 1325 1326 # Sources are variable name & value (packaged in SCons Value nodes) 1327 return ([target], [Value(variable), Value(val)]) 1328 1329config_builder = Builder(emitter = config_emitter, action = config_action) 1330 1331main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1332 1333# libelf build is shared across all configs in the build root. 1334main.SConscript('ext/libelf/SConscript', 1335 variant_dir = joinpath(build_root, 'libelf')) 1336 1337# iostream3 build is shared across all configs in the build root. 1338main.SConscript('ext/iostream3/SConscript', 1339 variant_dir = joinpath(build_root, 'iostream3')) 1340 1341# libfdt build is shared across all configs in the build root. 1342main.SConscript('ext/libfdt/SConscript', 1343 variant_dir = joinpath(build_root, 'libfdt')) 1344 1345# fputils build is shared across all configs in the build root. 1346main.SConscript('ext/fputils/SConscript', 1347 variant_dir = joinpath(build_root, 'fputils')) 1348 1349# DRAMSim2 build is shared across all configs in the build root. 1350main.SConscript('ext/dramsim2/SConscript', 1351 variant_dir = joinpath(build_root, 'dramsim2')) 1352 1353# DRAMPower build is shared across all configs in the build root. 1354main.SConscript('ext/drampower/SConscript', 1355 variant_dir = joinpath(build_root, 'drampower')) 1356 1357# nomali build is shared across all configs in the build root. 1358main.SConscript('ext/nomali/SConscript', 1359 variant_dir = joinpath(build_root, 'nomali')) 1360 1361################################################### 1362# 1363# This function is used to set up a directory with switching headers 1364# 1365################################################### 1366 1367main['ALL_ISA_LIST'] = all_isa_list 1368main['ALL_GPU_ISA_LIST'] = all_gpu_isa_list 1369all_isa_deps = {} 1370def make_switching_dir(dname, switch_headers, env): 1371 # Generate the header. target[0] is the full path of the output 1372 # header to generate. 'source' is a dummy variable, since we get the 1373 # list of ISAs from env['ALL_ISA_LIST']. 1374 def gen_switch_hdr(target, source, env): 1375 fname = str(target[0]) 1376 isa = env['TARGET_ISA'].lower() 1377 try: 1378 f = open(fname, 'w') 1379 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1380 f.close() 1381 except IOError: 1382 print "Failed to create %s" % fname 1383 raise 1384 1385 # Build SCons Action object. 'varlist' specifies env vars that this 1386 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1387 # should get re-executed. 1388 switch_hdr_action = MakeAction(gen_switch_hdr, 1389 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 1390 1391 # Instantiate actions for each header 1392 for hdr in switch_headers: 1393 env.Command(hdr, [], switch_hdr_action) 1394 1395 isa_target = Dir('.').up().name.lower().replace('_', '-') 1396 env['PHONY_BASE'] = '#'+isa_target 1397 all_isa_deps[isa_target] = None 1398 1399Export('make_switching_dir') 1400 1401def make_gpu_switching_dir(dname, switch_headers, env): 1402 # Generate the header. target[0] is the full path of the output 1403 # header to generate. 'source' is a dummy variable, since we get the 1404 # list of ISAs from env['ALL_ISA_LIST']. 1405 def gen_switch_hdr(target, source, env): 1406 fname = str(target[0]) 1407 1408 isa = env['TARGET_GPU_ISA'].lower() 1409 1410 try: 1411 f = open(fname, 'w') 1412 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1413 f.close() 1414 except IOError: 1415 print "Failed to create %s" % fname 1416 raise 1417 1418 # Build SCons Action object. 'varlist' specifies env vars that this 1419 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1420 # should get re-executed. 1421 switch_hdr_action = MakeAction(gen_switch_hdr, 1422 Transform("GENERATE"), varlist=['ALL_ISA_GPU_LIST']) 1423 1424 # Instantiate actions for each header 1425 for hdr in switch_headers: 1426 env.Command(hdr, [], switch_hdr_action) 1427 1428Export('make_gpu_switching_dir') 1429 1430# all-isas -> all-deps -> all-environs -> all_targets 1431main.Alias('#all-isas', []) 1432main.Alias('#all-deps', '#all-isas') 1433 1434# Dummy target to ensure all environments are created before telling 1435# SCons what to actually make (the command line arguments). We attach 1436# them to the dependence graph after the environments are complete. 1437ORIG_BUILD_TARGETS = list(BUILD_TARGETS) # force a copy; gets closure to work. 1438def environsComplete(target, source, env): 1439 for t in ORIG_BUILD_TARGETS: 1440 main.Depends('#all-targets', t) 1441 1442# Each build/* switching_dir attaches its *-environs target to #all-environs. 1443main.Append(BUILDERS = {'CompleteEnvirons' : 1444 Builder(action=MakeAction(environsComplete, None))}) 1445main.CompleteEnvirons('#all-environs', []) 1446 1447def doNothing(**ignored): pass 1448main.Append(BUILDERS = {'Dummy': Builder(action=MakeAction(doNothing, None))}) 1449 1450# The final target to which all the original targets ultimately get attached. 1451main.Dummy('#all-targets', '#all-environs') 1452BUILD_TARGETS[:] = ['#all-targets'] 1453 1454################################################### 1455# 1456# Define build environments for selected configurations. 1457# 1458################################################### 1459 1460for variant_path in variant_paths: 1461 if not GetOption('silent'): 1462 print "Building in", variant_path 1463 1464 # Make a copy of the build-root environment to use for this config. 1465 env = main.Clone() 1466 env['BUILDDIR'] = variant_path 1467 1468 # variant_dir is the tail component of build path, and is used to 1469 # determine the build parameters (e.g., 'ALPHA_SE') 1470 (build_root, variant_dir) = splitpath(variant_path) 1471 1472 # Set env variables according to the build directory config. 1473 sticky_vars.files = [] 1474 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1475 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1476 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1477 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1478 if isfile(current_vars_file): 1479 sticky_vars.files.append(current_vars_file) 1480 if not GetOption('silent'): 1481 print "Using saved variables file %s" % current_vars_file 1482 else: 1483 # Build dir-specific variables file doesn't exist. 1484 1485 # Make sure the directory is there so we can create it later 1486 opt_dir = dirname(current_vars_file) 1487 if not isdir(opt_dir): 1488 mkdir(opt_dir) 1489 1490 # Get default build variables from source tree. Variables are 1491 # normally determined by name of $VARIANT_DIR, but can be 1492 # overridden by '--default=' arg on command line. 1493 default = GetOption('default') 1494 opts_dir = joinpath(main.root.abspath, 'build_opts') 1495 if default: 1496 default_vars_files = [joinpath(build_root, 'variables', default), 1497 joinpath(opts_dir, default)] 1498 else: 1499 default_vars_files = [joinpath(opts_dir, variant_dir)] 1500 existing_files = filter(isfile, default_vars_files) 1501 if existing_files: 1502 default_vars_file = existing_files[0] 1503 sticky_vars.files.append(default_vars_file) 1504 print "Variables file %s not found,\n using defaults in %s" \ 1505 % (current_vars_file, default_vars_file) 1506 else: 1507 print "Error: cannot find variables file %s or " \ 1508 "default file(s) %s" \ 1509 % (current_vars_file, ' or '.join(default_vars_files)) 1510 Exit(1) 1511 1512 # Apply current variable settings to env 1513 sticky_vars.Update(env) 1514 1515 help_texts["local_vars"] += \ 1516 "Build variables for %s:\n" % variant_dir \ 1517 + sticky_vars.GenerateHelpText(env) 1518 1519 # Process variable settings. 1520 1521 if not have_fenv and env['USE_FENV']: 1522 print "Warning: <fenv.h> not available; " \ 1523 "forcing USE_FENV to False in", variant_dir + "." 1524 env['USE_FENV'] = False 1525 1526 if not env['USE_FENV']: 1527 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1528 print " FP results may deviate slightly from other platforms." 1529 1530 if env['EFENCE']: 1531 env.Append(LIBS=['efence']) 1532 1533 if env['USE_KVM']: 1534 if not have_kvm: 1535 print "Warning: Can not enable KVM, host seems to lack KVM support" 1536 env['USE_KVM'] = False 1537 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1538 print "Info: KVM support disabled due to unsupported host and " \ 1539 "target ISA combination" 1540 env['USE_KVM'] = False 1541 1542 if env['BUILD_GPU']: 1543 env.Append(CPPDEFINES=['BUILD_GPU']) 1544 1545 # Warn about missing optional functionality 1546 if env['USE_KVM']: 1547 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1548 print "Warning: perf_event headers lack support for the " \ 1549 "exclude_host attribute. KVM instruction counts will " \ 1550 "be inaccurate." 1551 1552 # Save sticky variable settings back to current variables file 1553 sticky_vars.Save(current_vars_file, env) 1554 1555 if env['USE_SSE2']: 1556 env.Append(CCFLAGS=['-msse2']) 1557 1558 # The src/SConscript file sets up the build rules in 'env' according 1559 # to the configured variables. It returns a list of environments, 1560 # one for each variant build (debug, opt, etc.) 1561 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env') 1562 1563def pairwise(iterable): 1564 "s -> (s0,s1), (s1,s2), (s2, s3), ..." 1565 a, b = itertools.tee(iterable) 1566 b.next() 1567 return itertools.izip(a, b) 1568 1569# Create false dependencies so SCons will parse ISAs, establish 1570# dependencies, and setup the build Environments serially. Either 1571# SCons (likely) and/or our SConscripts (possibly) cannot cope with -j 1572# greater than 1. It appears to be standard race condition stuff; it 1573# doesn't always fail, but usually, and the behaviors are different. 1574# Every time I tried to remove this, builds would fail in some 1575# creative new way. So, don't do that. You'll want to, though, because 1576# tests/SConscript takes a long time to make its Environments. 1577for t1, t2 in pairwise(sorted(all_isa_deps.iterkeys())): 1578 main.Depends('#%s-deps' % t2, '#%s-deps' % t1) 1579 main.Depends('#%s-environs' % t2, '#%s-environs' % t1) 1580 1581# base help text 1582Help(''' 1583Usage: scons [scons options] [build variables] [target(s)] 1584 1585Extra scons options: 1586%(options)s 1587 1588Global build variables: 1589%(global_vars)s 1590 1591%(local_vars)s 1592''' % help_texts) 1593