SConstruct revision 11887
1# -*- mode:python -*- 2 3# Copyright (c) 2013, 2015, 2016 ARM Limited 4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81# Check for recent-enough Python and SCons versions. 82try: 83 # Really old versions of scons only take two options for the 84 # function, so check once without the revision and once with the 85 # revision, the first instance will fail for stuff other than 86 # 0.98, and the second will fail for 0.98.0 87 EnsureSConsVersion(0, 98) 88 EnsureSConsVersion(0, 98, 1) 89except SystemExit, e: 90 print """ 91For more details, see: 92 http://gem5.org/Dependencies 93""" 94 raise 95 96# We ensure the python version early because because python-config 97# requires python 2.5 98try: 99 EnsurePythonVersion(2, 5) 100except SystemExit, e: 101 print """ 102You can use a non-default installation of the Python interpreter by 103rearranging your PATH so that scons finds the non-default 'python' and 104'python-config' first. 105 106For more details, see: 107 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 108""" 109 raise 110 111# Global Python includes 112import itertools 113import os 114import re 115import shutil 116import subprocess 117import sys 118 119from os import mkdir, environ 120from os.path import abspath, basename, dirname, expanduser, normpath 121from os.path import exists, isdir, isfile 122from os.path import join as joinpath, split as splitpath 123 124# SCons includes 125import SCons 126import SCons.Node 127 128extra_python_paths = [ 129 Dir('src/python').srcnode().abspath, # gem5 includes 130 Dir('ext/ply').srcnode().abspath, # ply is used by several files 131 ] 132 133sys.path[1:1] = extra_python_paths 134 135from m5.util import compareVersions, readCommand 136from m5.util.terminal import get_termcap 137 138help_texts = { 139 "options" : "", 140 "global_vars" : "", 141 "local_vars" : "" 142} 143 144Export("help_texts") 145 146 147# There's a bug in scons in that (1) by default, the help texts from 148# AddOption() are supposed to be displayed when you type 'scons -h' 149# and (2) you can override the help displayed by 'scons -h' using the 150# Help() function, but these two features are incompatible: once 151# you've overridden the help text using Help(), there's no way to get 152# at the help texts from AddOptions. See: 153# http://scons.tigris.org/issues/show_bug.cgi?id=2356 154# http://scons.tigris.org/issues/show_bug.cgi?id=2611 155# This hack lets us extract the help text from AddOptions and 156# re-inject it via Help(). Ideally someday this bug will be fixed and 157# we can just use AddOption directly. 158def AddLocalOption(*args, **kwargs): 159 col_width = 30 160 161 help = " " + ", ".join(args) 162 if "help" in kwargs: 163 length = len(help) 164 if length >= col_width: 165 help += "\n" + " " * col_width 166 else: 167 help += " " * (col_width - length) 168 help += kwargs["help"] 169 help_texts["options"] += help + "\n" 170 171 AddOption(*args, **kwargs) 172 173AddLocalOption('--colors', dest='use_colors', action='store_true', 174 help="Add color to abbreviated scons output") 175AddLocalOption('--no-colors', dest='use_colors', action='store_false', 176 help="Don't add color to abbreviated scons output") 177AddLocalOption('--with-cxx-config', dest='with_cxx_config', 178 action='store_true', 179 help="Build with support for C++-based configuration") 180AddLocalOption('--default', dest='default', type='string', action='store', 181 help='Override which build_opts file to use for defaults') 182AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 183 help='Disable style checking hooks') 184AddLocalOption('--no-lto', dest='no_lto', action='store_true', 185 help='Disable Link-Time Optimization for fast') 186AddLocalOption('--update-ref', dest='update_ref', action='store_true', 187 help='Update test reference outputs') 188AddLocalOption('--verbose', dest='verbose', action='store_true', 189 help='Print full tool command lines') 190AddLocalOption('--without-python', dest='without_python', 191 action='store_true', 192 help='Build without Python configuration support') 193AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 194 action='store_true', 195 help='Disable linking against tcmalloc') 196AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 197 help='Build with Undefined Behavior Sanitizer if available') 198AddLocalOption('--with-asan', dest='with_asan', action='store_true', 199 help='Build with Address Sanitizer if available') 200 201termcap = get_termcap(GetOption('use_colors')) 202 203######################################################################## 204# 205# Set up the main build environment. 206# 207######################################################################## 208 209# export TERM so that clang reports errors in color 210use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 211 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC', 212 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ]) 213 214use_prefixes = [ 215 "ASAN_", # address sanitizer symbolizer path and settings 216 "CCACHE_", # ccache (caching compiler wrapper) configuration 217 "CCC_", # clang static analyzer configuration 218 "DISTCC_", # distcc (distributed compiler wrapper) configuration 219 "INCLUDE_SERVER_", # distcc pump server settings 220 "M5", # M5 configuration (e.g., path to kernels) 221 ] 222 223use_env = {} 224for key,val in sorted(os.environ.iteritems()): 225 if key in use_vars or \ 226 any([key.startswith(prefix) for prefix in use_prefixes]): 227 use_env[key] = val 228 229# Tell scons to avoid implicit command dependencies to avoid issues 230# with the param wrappes being compiled twice (see 231# http://scons.tigris.org/issues/show_bug.cgi?id=2811) 232main = Environment(ENV=use_env, IMPLICIT_COMMAND_DEPENDENCIES=0) 233main.Decider('MD5-timestamp') 234main.root = Dir(".") # The current directory (where this file lives). 235main.srcdir = Dir("src") # The source directory 236 237main_dict_keys = main.Dictionary().keys() 238 239# Check that we have a C/C++ compiler 240if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 241 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)" 242 Exit(1) 243 244# Check that swig is present 245if not 'SWIG' in main_dict_keys: 246 print "swig is not installed (package swig on Ubuntu and RedHat)" 247 Exit(1) 248 249# add useful python code PYTHONPATH so it can be used by subprocesses 250# as well 251main.AppendENVPath('PYTHONPATH', extra_python_paths) 252 253######################################################################## 254# 255# Mercurial Stuff. 256# 257# If the gem5 directory is a mercurial repository, we should do some 258# extra things. 259# 260######################################################################## 261 262hgdir = main.root.Dir(".hg") 263 264 265style_message = """ 266You're missing the gem5 style hook, which automatically checks your code 267against the gem5 style rules on %s. 268This script will now install the hook in your %s. 269Press enter to continue, or ctrl-c to abort: """ 270 271mercurial_style_message = """ 272You're missing the gem5 style hook, which automatically checks your code 273against the gem5 style rules on hg commit and qrefresh commands. 274This script will now install the hook in your .hg/hgrc file. 275Press enter to continue, or ctrl-c to abort: """ 276 277git_style_message = """ 278You're missing the gem5 style or commit message hook. These hooks help 279to ensure that your code follows gem5's style rules on git commit. 280This script will now install the hook in your .git/hooks/ directory. 281Press enter to continue, or ctrl-c to abort: """ 282 283mercurial_style_upgrade_message = """ 284Your Mercurial style hooks are not up-to-date. This script will now 285try to automatically update them. A backup of your hgrc will be saved 286in .hg/hgrc.old. 287Press enter to continue, or ctrl-c to abort: """ 288 289mercurial_style_hook = """ 290# The following lines were automatically added by gem5/SConstruct 291# to provide the gem5 style-checking hooks 292[extensions] 293hgstyle = %s/util/hgstyle.py 294 295[hooks] 296pretxncommit.style = python:hgstyle.check_style 297pre-qrefresh.style = python:hgstyle.check_style 298# End of SConstruct additions 299 300""" % (main.root.abspath) 301 302mercurial_lib_not_found = """ 303Mercurial libraries cannot be found, ignoring style hook. If 304you are a gem5 developer, please fix this and run the style 305hook. It is important. 306""" 307 308# Check for style hook and prompt for installation if it's not there. 309# Skip this if --ignore-style was specified, there's no interactive 310# terminal to prompt, or no recognized revision control system can be 311# found. 312ignore_style = GetOption('ignore_style') or not sys.stdin.isatty() 313 314# Try wire up Mercurial to the style hooks 315if not ignore_style and hgdir.exists(): 316 style_hook = True 317 style_hooks = tuple() 318 hgrc = hgdir.File('hgrc') 319 hgrc_old = hgdir.File('hgrc.old') 320 try: 321 from mercurial import ui 322 ui = ui.ui() 323 ui.readconfig(hgrc.abspath) 324 style_hooks = (ui.config('hooks', 'pretxncommit.style', None), 325 ui.config('hooks', 'pre-qrefresh.style', None)) 326 style_hook = all(style_hooks) 327 style_extension = ui.config('extensions', 'style', None) 328 except ImportError: 329 print mercurial_lib_not_found 330 331 if "python:style.check_style" in style_hooks: 332 # Try to upgrade the style hooks 333 print mercurial_style_upgrade_message 334 # continue unless user does ctrl-c/ctrl-d etc. 335 try: 336 raw_input() 337 except: 338 print "Input exception, exiting scons.\n" 339 sys.exit(1) 340 shutil.copyfile(hgrc.abspath, hgrc_old.abspath) 341 re_style_hook = re.compile(r"^([^=#]+)\.style\s*=\s*([^#\s]+).*") 342 re_style_extension = re.compile("style\s*=\s*([^#\s]+).*") 343 old, new = open(hgrc_old.abspath, 'r'), open(hgrc.abspath, 'w') 344 for l in old: 345 m_hook = re_style_hook.match(l) 346 m_ext = re_style_extension.match(l) 347 if m_hook: 348 hook, check = m_hook.groups() 349 if check != "python:style.check_style": 350 print "Warning: %s.style is using a non-default " \ 351 "checker: %s" % (hook, check) 352 if hook not in ("pretxncommit", "pre-qrefresh"): 353 print "Warning: Updating unknown style hook: %s" % hook 354 355 l = "%s.style = python:hgstyle.check_style\n" % hook 356 elif m_ext and m_ext.group(1) == style_extension: 357 l = "hgstyle = %s/util/hgstyle.py\n" % main.root.abspath 358 359 new.write(l) 360 elif not style_hook: 361 print mercurial_style_message, 362 # continue unless user does ctrl-c/ctrl-d etc. 363 try: 364 raw_input() 365 except: 366 print "Input exception, exiting scons.\n" 367 sys.exit(1) 368 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 369 print "Adding style hook to", hgrc_path, "\n" 370 try: 371 with open(hgrc_path, 'a') as f: 372 f.write(mercurial_style_hook) 373 except: 374 print "Error updating", hgrc_path 375 sys.exit(1) 376 377def install_git_style_hooks(): 378 try: 379 gitdir = Dir(readCommand( 380 ["git", "rev-parse", "--git-dir"]).strip("\n")) 381 except Exception, e: 382 print "Warning: Failed to find git repo directory: %s" % e 383 return 384 385 git_hooks = gitdir.Dir("hooks") 386 def hook_exists(hook_name): 387 hook = git_hooks.File(hook_name) 388 return hook.exists() 389 390 def hook_install(hook_name, script): 391 hook = git_hooks.File(hook_name) 392 if hook.exists(): 393 print "Warning: Can't install %s, hook already exists." % hook_name 394 return 395 396 if not git_hooks.exists(): 397 mkdir(git_hooks.get_abspath()) 398 399 # Use a relative symlink if the hooks live in the source directory 400 if hook.is_under(main.root): 401 script_path = os.path.relpath( 402 script.get_abspath(), 403 hook.Dir(".").get_abspath()) 404 else: 405 script_path = script.get_abspath() 406 407 try: 408 os.symlink(script_path, hook.get_abspath()) 409 except: 410 print "Error updating git %s hook" % hook_name 411 raise 412 413 if hook_exists("pre-commit") and hook_exists("commit-msg"): 414 return 415 416 print git_style_message, 417 try: 418 raw_input() 419 except: 420 print "Input exception, exiting scons.\n" 421 sys.exit(1) 422 423 git_style_script = File("util/git-pre-commit.py") 424 git_msg_script = File("ext/git-commit-msg") 425 426 hook_install("pre-commit", git_style_script) 427 hook_install("commit-msg", git_msg_script) 428 429# Try to wire up git to the style hooks 430if not ignore_style and main.root.Entry(".git").exists(): 431 install_git_style_hooks() 432 433################################################### 434# 435# Figure out which configurations to set up based on the path(s) of 436# the target(s). 437# 438################################################### 439 440# Find default configuration & binary. 441Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 442 443# helper function: find last occurrence of element in list 444def rfind(l, elt, offs = -1): 445 for i in range(len(l)+offs, 0, -1): 446 if l[i] == elt: 447 return i 448 raise ValueError, "element not found" 449 450# Take a list of paths (or SCons Nodes) and return a list with all 451# paths made absolute and ~-expanded. Paths will be interpreted 452# relative to the launch directory unless a different root is provided 453def makePathListAbsolute(path_list, root=GetLaunchDir()): 454 return [abspath(joinpath(root, expanduser(str(p)))) 455 for p in path_list] 456 457# Each target must have 'build' in the interior of the path; the 458# directory below this will determine the build parameters. For 459# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 460# recognize that ALPHA_SE specifies the configuration because it 461# follow 'build' in the build path. 462 463# The funky assignment to "[:]" is needed to replace the list contents 464# in place rather than reassign the symbol to a new list, which 465# doesn't work (obviously!). 466BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 467 468# Generate a list of the unique build roots and configs that the 469# collected targets reference. 470variant_paths = [] 471build_root = None 472for t in BUILD_TARGETS: 473 path_dirs = t.split('/') 474 try: 475 build_top = rfind(path_dirs, 'build', -2) 476 except: 477 print "Error: no non-leaf 'build' dir found on target path", t 478 Exit(1) 479 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 480 if not build_root: 481 build_root = this_build_root 482 else: 483 if this_build_root != build_root: 484 print "Error: build targets not under same build root\n"\ 485 " %s\n %s" % (build_root, this_build_root) 486 Exit(1) 487 variant_path = joinpath('/',*path_dirs[:build_top+2]) 488 if variant_path not in variant_paths: 489 variant_paths.append(variant_path) 490 491# Make sure build_root exists (might not if this is the first build there) 492if not isdir(build_root): 493 mkdir(build_root) 494main['BUILDROOT'] = build_root 495 496Export('main') 497 498main.SConsignFile(joinpath(build_root, "sconsign")) 499 500# Default duplicate option is to use hard links, but this messes up 501# when you use emacs to edit a file in the target dir, as emacs moves 502# file to file~ then copies to file, breaking the link. Symbolic 503# (soft) links work better. 504main.SetOption('duplicate', 'soft-copy') 505 506# 507# Set up global sticky variables... these are common to an entire build 508# tree (not specific to a particular build like ALPHA_SE) 509# 510 511global_vars_file = joinpath(build_root, 'variables.global') 512 513global_vars = Variables(global_vars_file, args=ARGUMENTS) 514 515global_vars.AddVariables( 516 ('CC', 'C compiler', environ.get('CC', main['CC'])), 517 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 518 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 519 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 520 ('BATCH', 'Use batch pool for build and tests', False), 521 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 522 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 523 ('EXTRAS', 'Add extra directories to the compilation', '') 524 ) 525 526# Update main environment with values from ARGUMENTS & global_vars_file 527global_vars.Update(main) 528help_texts["global_vars"] += global_vars.GenerateHelpText(main) 529 530# Save sticky variable settings back to current variables file 531global_vars.Save(global_vars_file, main) 532 533# Parse EXTRAS variable to build list of all directories where we're 534# look for sources etc. This list is exported as extras_dir_list. 535base_dir = main.srcdir.abspath 536if main['EXTRAS']: 537 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 538else: 539 extras_dir_list = [] 540 541Export('base_dir') 542Export('extras_dir_list') 543 544# the ext directory should be on the #includes path 545main.Append(CPPPATH=[Dir('ext')]) 546 547def strip_build_path(path, env): 548 path = str(path) 549 variant_base = env['BUILDROOT'] + os.path.sep 550 if path.startswith(variant_base): 551 path = path[len(variant_base):] 552 elif path.startswith('build/'): 553 path = path[6:] 554 return path 555 556# Generate a string of the form: 557# common/path/prefix/src1, src2 -> tgt1, tgt2 558# to print while building. 559class Transform(object): 560 # all specific color settings should be here and nowhere else 561 tool_color = termcap.Normal 562 pfx_color = termcap.Yellow 563 srcs_color = termcap.Yellow + termcap.Bold 564 arrow_color = termcap.Blue + termcap.Bold 565 tgts_color = termcap.Yellow + termcap.Bold 566 567 def __init__(self, tool, max_sources=99): 568 self.format = self.tool_color + (" [%8s] " % tool) \ 569 + self.pfx_color + "%s" \ 570 + self.srcs_color + "%s" \ 571 + self.arrow_color + " -> " \ 572 + self.tgts_color + "%s" \ 573 + termcap.Normal 574 self.max_sources = max_sources 575 576 def __call__(self, target, source, env, for_signature=None): 577 # truncate source list according to max_sources param 578 source = source[0:self.max_sources] 579 def strip(f): 580 return strip_build_path(str(f), env) 581 if len(source) > 0: 582 srcs = map(strip, source) 583 else: 584 srcs = [''] 585 tgts = map(strip, target) 586 # surprisingly, os.path.commonprefix is a dumb char-by-char string 587 # operation that has nothing to do with paths. 588 com_pfx = os.path.commonprefix(srcs + tgts) 589 com_pfx_len = len(com_pfx) 590 if com_pfx: 591 # do some cleanup and sanity checking on common prefix 592 if com_pfx[-1] == ".": 593 # prefix matches all but file extension: ok 594 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 595 com_pfx = com_pfx[0:-1] 596 elif com_pfx[-1] == "/": 597 # common prefix is directory path: OK 598 pass 599 else: 600 src0_len = len(srcs[0]) 601 tgt0_len = len(tgts[0]) 602 if src0_len == com_pfx_len: 603 # source is a substring of target, OK 604 pass 605 elif tgt0_len == com_pfx_len: 606 # target is a substring of source, need to back up to 607 # avoid empty string on RHS of arrow 608 sep_idx = com_pfx.rfind(".") 609 if sep_idx != -1: 610 com_pfx = com_pfx[0:sep_idx] 611 else: 612 com_pfx = '' 613 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 614 # still splitting at file extension: ok 615 pass 616 else: 617 # probably a fluke; ignore it 618 com_pfx = '' 619 # recalculate length in case com_pfx was modified 620 com_pfx_len = len(com_pfx) 621 def fmt(files): 622 f = map(lambda s: s[com_pfx_len:], files) 623 return ', '.join(f) 624 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 625 626Export('Transform') 627 628# enable the regression script to use the termcap 629main['TERMCAP'] = termcap 630 631if GetOption('verbose'): 632 def MakeAction(action, string, *args, **kwargs): 633 return Action(action, *args, **kwargs) 634else: 635 MakeAction = Action 636 main['CCCOMSTR'] = Transform("CC") 637 main['CXXCOMSTR'] = Transform("CXX") 638 main['ASCOMSTR'] = Transform("AS") 639 main['SWIGCOMSTR'] = Transform("SWIG") 640 main['ARCOMSTR'] = Transform("AR", 0) 641 main['LINKCOMSTR'] = Transform("LINK", 0) 642 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 643 main['M4COMSTR'] = Transform("M4") 644 main['SHCCCOMSTR'] = Transform("SHCC") 645 main['SHCXXCOMSTR'] = Transform("SHCXX") 646Export('MakeAction') 647 648# Initialize the Link-Time Optimization (LTO) flags 649main['LTO_CCFLAGS'] = [] 650main['LTO_LDFLAGS'] = [] 651 652# According to the readme, tcmalloc works best if the compiler doesn't 653# assume that we're using the builtin malloc and friends. These flags 654# are compiler-specific, so we need to set them after we detect which 655# compiler we're using. 656main['TCMALLOC_CCFLAGS'] = [] 657 658CXX_version = readCommand([main['CXX'],'--version'], exception=False) 659CXX_V = readCommand([main['CXX'],'-V'], exception=False) 660 661main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 662main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 663if main['GCC'] + main['CLANG'] > 1: 664 print 'Error: How can we have two at the same time?' 665 Exit(1) 666 667# Set up default C++ compiler flags 668if main['GCC'] or main['CLANG']: 669 # As gcc and clang share many flags, do the common parts here 670 main.Append(CCFLAGS=['-pipe']) 671 main.Append(CCFLAGS=['-fno-strict-aliasing']) 672 # Enable -Wall and -Wextra and then disable the few warnings that 673 # we consistently violate 674 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 675 '-Wno-sign-compare', '-Wno-unused-parameter']) 676 # We always compile using C++11 677 main.Append(CXXFLAGS=['-std=c++11']) 678 if sys.platform.startswith('freebsd'): 679 main.Append(CCFLAGS=['-I/usr/local/include']) 680 main.Append(CXXFLAGS=['-I/usr/local/include']) 681else: 682 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 683 print "Don't know what compiler options to use for your compiler." 684 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 685 print termcap.Yellow + ' version:' + termcap.Normal, 686 if not CXX_version: 687 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 688 termcap.Normal 689 else: 690 print CXX_version.replace('\n', '<nl>') 691 print " If you're trying to use a compiler other than GCC" 692 print " or clang, there appears to be something wrong with your" 693 print " environment." 694 print " " 695 print " If you are trying to use a compiler other than those listed" 696 print " above you will need to ease fix SConstruct and " 697 print " src/SConscript to support that compiler." 698 Exit(1) 699 700if main['GCC']: 701 # Check for a supported version of gcc. >= 4.8 is chosen for its 702 # level of c++11 support. See 703 # http://gcc.gnu.org/projects/cxx0x.html for details. 704 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 705 if compareVersions(gcc_version, "4.8") < 0: 706 print 'Error: gcc version 4.8 or newer required.' 707 print ' Installed version:', gcc_version 708 Exit(1) 709 710 main['GCC_VERSION'] = gcc_version 711 712 # gcc from version 4.8 and above generates "rep; ret" instructions 713 # to avoid performance penalties on certain AMD chips. Older 714 # assemblers detect this as an error, "Error: expecting string 715 # instruction after `rep'" 716 as_version_raw = readCommand([main['AS'], '-v', '/dev/null'], 717 exception=False).split() 718 719 # version strings may contain extra distro-specific 720 # qualifiers, so play it safe and keep only what comes before 721 # the first hyphen 722 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None 723 724 if not as_version or compareVersions(as_version, "2.23") < 0: 725 print termcap.Yellow + termcap.Bold + \ 726 'Warning: This combination of gcc and binutils have' + \ 727 ' known incompatibilities.\n' + \ 728 ' If you encounter build problems, please update ' + \ 729 'binutils to 2.23.' + \ 730 termcap.Normal 731 732 # Make sure we warn if the user has requested to compile with the 733 # Undefined Benahvior Sanitizer and this version of gcc does not 734 # support it. 735 if GetOption('with_ubsan') and \ 736 compareVersions(gcc_version, '4.9') < 0: 737 print termcap.Yellow + termcap.Bold + \ 738 'Warning: UBSan is only supported using gcc 4.9 and later.' + \ 739 termcap.Normal 740 741 # Add the appropriate Link-Time Optimization (LTO) flags 742 # unless LTO is explicitly turned off. Note that these flags 743 # are only used by the fast target. 744 if not GetOption('no_lto'): 745 # Pass the LTO flag when compiling to produce GIMPLE 746 # output, we merely create the flags here and only append 747 # them later 748 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 749 750 # Use the same amount of jobs for LTO as we are running 751 # scons with 752 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 753 754 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 755 '-fno-builtin-realloc', '-fno-builtin-free']) 756 757 # add option to check for undeclared overrides 758 if compareVersions(gcc_version, "5.0") > 0: 759 main.Append(CCFLAGS=['-Wno-error=suggest-override']) 760 761elif main['CLANG']: 762 # Check for a supported version of clang, >= 3.1 is needed to 763 # support similar features as gcc 4.8. See 764 # http://clang.llvm.org/cxx_status.html for details 765 clang_version_re = re.compile(".* version (\d+\.\d+)") 766 clang_version_match = clang_version_re.search(CXX_version) 767 if (clang_version_match): 768 clang_version = clang_version_match.groups()[0] 769 if compareVersions(clang_version, "3.1") < 0: 770 print 'Error: clang version 3.1 or newer required.' 771 print ' Installed version:', clang_version 772 Exit(1) 773 else: 774 print 'Error: Unable to determine clang version.' 775 Exit(1) 776 777 # clang has a few additional warnings that we disable, extraneous 778 # parantheses are allowed due to Ruby's printing of the AST, 779 # finally self assignments are allowed as the generated CPU code 780 # is relying on this 781 main.Append(CCFLAGS=['-Wno-parentheses', 782 '-Wno-self-assign', 783 # Some versions of libstdc++ (4.8?) seem to 784 # use struct hash and class hash 785 # interchangeably. 786 '-Wno-mismatched-tags', 787 ]) 788 789 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 790 791 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 792 # opposed to libstdc++, as the later is dated. 793 if sys.platform == "darwin": 794 main.Append(CXXFLAGS=['-stdlib=libc++']) 795 main.Append(LIBS=['c++']) 796 797 # On FreeBSD we need libthr. 798 if sys.platform.startswith('freebsd'): 799 main.Append(LIBS=['thr']) 800 801else: 802 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 803 print "Don't know what compiler options to use for your compiler." 804 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 805 print termcap.Yellow + ' version:' + termcap.Normal, 806 if not CXX_version: 807 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 808 termcap.Normal 809 else: 810 print CXX_version.replace('\n', '<nl>') 811 print " If you're trying to use a compiler other than GCC" 812 print " or clang, there appears to be something wrong with your" 813 print " environment." 814 print " " 815 print " If you are trying to use a compiler other than those listed" 816 print " above you will need to ease fix SConstruct and " 817 print " src/SConscript to support that compiler." 818 Exit(1) 819 820# Set up common yacc/bison flags (needed for Ruby) 821main['YACCFLAGS'] = '-d' 822main['YACCHXXFILESUFFIX'] = '.hh' 823 824# Do this after we save setting back, or else we'll tack on an 825# extra 'qdo' every time we run scons. 826if main['BATCH']: 827 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 828 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 829 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 830 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 831 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 832 833if sys.platform == 'cygwin': 834 # cygwin has some header file issues... 835 main.Append(CCFLAGS=["-Wno-uninitialized"]) 836 837# Check for the protobuf compiler 838protoc_version = readCommand([main['PROTOC'], '--version'], 839 exception='').split() 840 841# First two words should be "libprotoc x.y.z" 842if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 843 print termcap.Yellow + termcap.Bold + \ 844 'Warning: Protocol buffer compiler (protoc) not found.\n' + \ 845 ' Please install protobuf-compiler for tracing support.' + \ 846 termcap.Normal 847 main['PROTOC'] = False 848else: 849 # Based on the availability of the compress stream wrappers, 850 # require 2.1.0 851 min_protoc_version = '2.1.0' 852 if compareVersions(protoc_version[1], min_protoc_version) < 0: 853 print termcap.Yellow + termcap.Bold + \ 854 'Warning: protoc version', min_protoc_version, \ 855 'or newer required.\n' + \ 856 ' Installed version:', protoc_version[1], \ 857 termcap.Normal 858 main['PROTOC'] = False 859 else: 860 # Attempt to determine the appropriate include path and 861 # library path using pkg-config, that means we also need to 862 # check for pkg-config. Note that it is possible to use 863 # protobuf without the involvement of pkg-config. Later on we 864 # check go a library config check and at that point the test 865 # will fail if libprotobuf cannot be found. 866 if readCommand(['pkg-config', '--version'], exception=''): 867 try: 868 # Attempt to establish what linking flags to add for protobuf 869 # using pkg-config 870 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 871 except: 872 print termcap.Yellow + termcap.Bold + \ 873 'Warning: pkg-config could not get protobuf flags.' + \ 874 termcap.Normal 875 876# Check for SWIG 877if not main.has_key('SWIG'): 878 print 'Error: SWIG utility not found.' 879 print ' Please install (see http://www.swig.org) and retry.' 880 Exit(1) 881 882# Check for appropriate SWIG version 883swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 884# First 3 words should be "SWIG Version x.y.z" 885if len(swig_version) < 3 or \ 886 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 887 print 'Error determining SWIG version.' 888 Exit(1) 889 890min_swig_version = '2.0.4' 891if compareVersions(swig_version[2], min_swig_version) < 0: 892 print 'Error: SWIG version', min_swig_version, 'or newer required.' 893 print ' Installed version:', swig_version[2] 894 Exit(1) 895 896# Check for known incompatibilities. The standard library shipped with 897# gcc >= 4.9 does not play well with swig versions prior to 3.0 898if main['GCC'] and compareVersions(gcc_version, '4.9') >= 0 and \ 899 compareVersions(swig_version[2], '3.0') < 0: 900 print termcap.Yellow + termcap.Bold + \ 901 'Warning: This combination of gcc and swig have' + \ 902 ' known incompatibilities.\n' + \ 903 ' If you encounter build problems, please update ' + \ 904 'swig to 3.0 or later.' + \ 905 termcap.Normal 906 907# Set up SWIG flags & scanner 908swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 909main.Append(SWIGFLAGS=swig_flags) 910 911# Check for 'timeout' from GNU coreutils. If present, regressions will 912# be run with a time limit. We require version 8.13 since we rely on 913# support for the '--foreground' option. 914if sys.platform.startswith('freebsd'): 915 timeout_lines = readCommand(['gtimeout', '--version'], 916 exception='').splitlines() 917else: 918 timeout_lines = readCommand(['timeout', '--version'], 919 exception='').splitlines() 920# Get the first line and tokenize it 921timeout_version = timeout_lines[0].split() if timeout_lines else [] 922main['TIMEOUT'] = timeout_version and \ 923 compareVersions(timeout_version[-1], '8.13') >= 0 924 925# filter out all existing swig scanners, they mess up the dependency 926# stuff for some reason 927scanners = [] 928for scanner in main['SCANNERS']: 929 skeys = scanner.skeys 930 if skeys == '.i': 931 continue 932 933 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 934 continue 935 936 scanners.append(scanner) 937 938# add the new swig scanner that we like better 939from SCons.Scanner import ClassicCPP as CPPScanner 940swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 941scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 942 943# replace the scanners list that has what we want 944main['SCANNERS'] = scanners 945 946# Add a custom Check function to test for structure members. 947def CheckMember(context, include, decl, member, include_quotes="<>"): 948 context.Message("Checking for member %s in %s..." % 949 (member, decl)) 950 text = """ 951#include %(header)s 952int main(){ 953 %(decl)s test; 954 (void)test.%(member)s; 955 return 0; 956}; 957""" % { "header" : include_quotes[0] + include + include_quotes[1], 958 "decl" : decl, 959 "member" : member, 960 } 961 962 ret = context.TryCompile(text, extension=".cc") 963 context.Result(ret) 964 return ret 965 966# Platform-specific configuration. Note again that we assume that all 967# builds under a given build root run on the same host platform. 968conf = Configure(main, 969 conf_dir = joinpath(build_root, '.scons_config'), 970 log_file = joinpath(build_root, 'scons_config.log'), 971 custom_tests = { 972 'CheckMember' : CheckMember, 973 }) 974 975# Check if we should compile a 64 bit binary on Mac OS X/Darwin 976try: 977 import platform 978 uname = platform.uname() 979 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 980 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 981 main.Append(CCFLAGS=['-arch', 'x86_64']) 982 main.Append(CFLAGS=['-arch', 'x86_64']) 983 main.Append(LINKFLAGS=['-arch', 'x86_64']) 984 main.Append(ASFLAGS=['-arch', 'x86_64']) 985except: 986 pass 987 988# Recent versions of scons substitute a "Null" object for Configure() 989# when configuration isn't necessary, e.g., if the "--help" option is 990# present. Unfortuantely this Null object always returns false, 991# breaking all our configuration checks. We replace it with our own 992# more optimistic null object that returns True instead. 993if not conf: 994 def NullCheck(*args, **kwargs): 995 return True 996 997 class NullConf: 998 def __init__(self, env): 999 self.env = env 1000 def Finish(self): 1001 return self.env 1002 def __getattr__(self, mname): 1003 return NullCheck 1004 1005 conf = NullConf(main) 1006 1007# Cache build files in the supplied directory. 1008if main['M5_BUILD_CACHE']: 1009 print 'Using build cache located at', main['M5_BUILD_CACHE'] 1010 CacheDir(main['M5_BUILD_CACHE']) 1011 1012if not GetOption('without_python'): 1013 # Find Python include and library directories for embedding the 1014 # interpreter. We rely on python-config to resolve the appropriate 1015 # includes and linker flags. ParseConfig does not seem to understand 1016 # the more exotic linker flags such as -Xlinker and -export-dynamic so 1017 # we add them explicitly below. If you want to link in an alternate 1018 # version of python, see above for instructions on how to invoke 1019 # scons with the appropriate PATH set. 1020 # 1021 # First we check if python2-config exists, else we use python-config 1022 python_config = readCommand(['which', 'python2-config'], 1023 exception='').strip() 1024 if not os.path.exists(python_config): 1025 python_config = readCommand(['which', 'python-config'], 1026 exception='').strip() 1027 py_includes = readCommand([python_config, '--includes'], 1028 exception='').split() 1029 # Strip the -I from the include folders before adding them to the 1030 # CPPPATH 1031 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes)) 1032 1033 # Read the linker flags and split them into libraries and other link 1034 # flags. The libraries are added later through the call the CheckLib. 1035 py_ld_flags = readCommand([python_config, '--ldflags'], 1036 exception='').split() 1037 py_libs = [] 1038 for lib in py_ld_flags: 1039 if not lib.startswith('-l'): 1040 main.Append(LINKFLAGS=[lib]) 1041 else: 1042 lib = lib[2:] 1043 if lib not in py_libs: 1044 py_libs.append(lib) 1045 1046 # verify that this stuff works 1047 if not conf.CheckHeader('Python.h', '<>'): 1048 print "Error: can't find Python.h header in", py_includes 1049 print "Install Python headers (package python-dev on Ubuntu and RedHat)" 1050 Exit(1) 1051 1052 for lib in py_libs: 1053 if not conf.CheckLib(lib): 1054 print "Error: can't find library %s required by python" % lib 1055 Exit(1) 1056 1057# On Solaris you need to use libsocket for socket ops 1058if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1059 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1060 print "Can't find library with socket calls (e.g. accept())" 1061 Exit(1) 1062 1063# Check for zlib. If the check passes, libz will be automatically 1064# added to the LIBS environment variable. 1065if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 1066 print 'Error: did not find needed zlib compression library '\ 1067 'and/or zlib.h header file.' 1068 print ' Please install zlib and try again.' 1069 Exit(1) 1070 1071# If we have the protobuf compiler, also make sure we have the 1072# development libraries. If the check passes, libprotobuf will be 1073# automatically added to the LIBS environment variable. After 1074# this, we can use the HAVE_PROTOBUF flag to determine if we have 1075# got both protoc and libprotobuf available. 1076main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 1077 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 1078 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 1079 1080# If we have the compiler but not the library, print another warning. 1081if main['PROTOC'] and not main['HAVE_PROTOBUF']: 1082 print termcap.Yellow + termcap.Bold + \ 1083 'Warning: did not find protocol buffer library and/or headers.\n' + \ 1084 ' Please install libprotobuf-dev for tracing support.' + \ 1085 termcap.Normal 1086 1087# Check for librt. 1088have_posix_clock = \ 1089 conf.CheckLibWithHeader(None, 'time.h', 'C', 1090 'clock_nanosleep(0,0,NULL,NULL);') or \ 1091 conf.CheckLibWithHeader('rt', 'time.h', 'C', 1092 'clock_nanosleep(0,0,NULL,NULL);') 1093 1094have_posix_timers = \ 1095 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 1096 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 1097 1098if not GetOption('without_tcmalloc'): 1099 if conf.CheckLib('tcmalloc'): 1100 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1101 elif conf.CheckLib('tcmalloc_minimal'): 1102 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1103 else: 1104 print termcap.Yellow + termcap.Bold + \ 1105 "You can get a 12% performance improvement by "\ 1106 "installing tcmalloc (libgoogle-perftools-dev package "\ 1107 "on Ubuntu or RedHat)." + termcap.Normal 1108 1109 1110# Detect back trace implementations. The last implementation in the 1111# list will be used by default. 1112backtrace_impls = [ "none" ] 1113 1114if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', 1115 'backtrace_symbols_fd((void*)0, 0, 0);'): 1116 backtrace_impls.append("glibc") 1117elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C', 1118 'backtrace_symbols_fd((void*)0, 0, 0);'): 1119 # NetBSD and FreeBSD need libexecinfo. 1120 backtrace_impls.append("glibc") 1121 main.Append(LIBS=['execinfo']) 1122 1123if backtrace_impls[-1] == "none": 1124 default_backtrace_impl = "none" 1125 print termcap.Yellow + termcap.Bold + \ 1126 "No suitable back trace implementation found." + \ 1127 termcap.Normal 1128 1129if not have_posix_clock: 1130 print "Can't find library for POSIX clocks." 1131 1132# Check for <fenv.h> (C99 FP environment control) 1133have_fenv = conf.CheckHeader('fenv.h', '<>') 1134if not have_fenv: 1135 print "Warning: Header file <fenv.h> not found." 1136 print " This host has no IEEE FP rounding mode control." 1137 1138# Check if we should enable KVM-based hardware virtualization. The API 1139# we rely on exists since version 2.6.36 of the kernel, but somehow 1140# the KVM_API_VERSION does not reflect the change. We test for one of 1141# the types as a fall back. 1142have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 1143if not have_kvm: 1144 print "Info: Compatible header file <linux/kvm.h> not found, " \ 1145 "disabling KVM support." 1146 1147# x86 needs support for xsave. We test for the structure here since we 1148# won't be able to run new tests by the time we know which ISA we're 1149# targeting. 1150have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 1151 '#include <linux/kvm.h>') != 0 1152 1153# Check if the requested target ISA is compatible with the host 1154def is_isa_kvm_compatible(isa): 1155 try: 1156 import platform 1157 host_isa = platform.machine() 1158 except: 1159 print "Warning: Failed to determine host ISA." 1160 return False 1161 1162 if not have_posix_timers: 1163 print "Warning: Can not enable KVM, host seems to lack support " \ 1164 "for POSIX timers" 1165 return False 1166 1167 if isa == "arm": 1168 return host_isa in ( "armv7l", "aarch64" ) 1169 elif isa == "x86": 1170 if host_isa != "x86_64": 1171 return False 1172 1173 if not have_kvm_xsave: 1174 print "KVM on x86 requires xsave support in kernel headers." 1175 return False 1176 1177 return True 1178 else: 1179 return False 1180 1181 1182# Check if the exclude_host attribute is available. We want this to 1183# get accurate instruction counts in KVM. 1184main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 1185 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 1186 1187 1188###################################################################### 1189# 1190# Finish the configuration 1191# 1192main = conf.Finish() 1193 1194###################################################################### 1195# 1196# Collect all non-global variables 1197# 1198 1199# Define the universe of supported ISAs 1200all_isa_list = [ ] 1201all_gpu_isa_list = [ ] 1202Export('all_isa_list') 1203Export('all_gpu_isa_list') 1204 1205class CpuModel(object): 1206 '''The CpuModel class encapsulates everything the ISA parser needs to 1207 know about a particular CPU model.''' 1208 1209 # Dict of available CPU model objects. Accessible as CpuModel.dict. 1210 dict = {} 1211 1212 # Constructor. Automatically adds models to CpuModel.dict. 1213 def __init__(self, name, default=False): 1214 self.name = name # name of model 1215 1216 # This cpu is enabled by default 1217 self.default = default 1218 1219 # Add self to dict 1220 if name in CpuModel.dict: 1221 raise AttributeError, "CpuModel '%s' already registered" % name 1222 CpuModel.dict[name] = self 1223 1224Export('CpuModel') 1225 1226# Sticky variables get saved in the variables file so they persist from 1227# one invocation to the next (unless overridden, in which case the new 1228# value becomes sticky). 1229sticky_vars = Variables(args=ARGUMENTS) 1230Export('sticky_vars') 1231 1232# Sticky variables that should be exported 1233export_vars = [] 1234Export('export_vars') 1235 1236# For Ruby 1237all_protocols = [] 1238Export('all_protocols') 1239protocol_dirs = [] 1240Export('protocol_dirs') 1241slicc_includes = [] 1242Export('slicc_includes') 1243 1244# Walk the tree and execute all SConsopts scripts that wil add to the 1245# above variables 1246if GetOption('verbose'): 1247 print "Reading SConsopts" 1248for bdir in [ base_dir ] + extras_dir_list: 1249 if not isdir(bdir): 1250 print "Error: directory '%s' does not exist" % bdir 1251 Exit(1) 1252 for root, dirs, files in os.walk(bdir): 1253 if 'SConsopts' in files: 1254 if GetOption('verbose'): 1255 print "Reading", joinpath(root, 'SConsopts') 1256 SConscript(joinpath(root, 'SConsopts')) 1257 1258all_isa_list.sort() 1259all_gpu_isa_list.sort() 1260 1261sticky_vars.AddVariables( 1262 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 1263 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 1264 ListVariable('CPU_MODELS', 'CPU models', 1265 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 1266 sorted(CpuModel.dict.keys())), 1267 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 1268 False), 1269 BoolVariable('SS_COMPATIBLE_FP', 1270 'Make floating-point results compatible with SimpleScalar', 1271 False), 1272 BoolVariable('USE_SSE2', 1273 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1274 False), 1275 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1276 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1277 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 1278 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm), 1279 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1280 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1281 all_protocols), 1282 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1283 backtrace_impls[-1], backtrace_impls) 1284 ) 1285 1286# These variables get exported to #defines in config/*.hh (see src/SConscript). 1287export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1288 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 1289 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST'] 1290 1291################################################### 1292# 1293# Define a SCons builder for configuration flag headers. 1294# 1295################################################### 1296 1297# This function generates a config header file that #defines the 1298# variable symbol to the current variable setting (0 or 1). The source 1299# operands are the name of the variable and a Value node containing the 1300# value of the variable. 1301def build_config_file(target, source, env): 1302 (variable, value) = [s.get_contents() for s in source] 1303 f = file(str(target[0]), 'w') 1304 print >> f, '#define', variable, value 1305 f.close() 1306 return None 1307 1308# Combine the two functions into a scons Action object. 1309config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1310 1311# The emitter munges the source & target node lists to reflect what 1312# we're really doing. 1313def config_emitter(target, source, env): 1314 # extract variable name from Builder arg 1315 variable = str(target[0]) 1316 # True target is config header file 1317 target = joinpath('config', variable.lower() + '.hh') 1318 val = env[variable] 1319 if isinstance(val, bool): 1320 # Force value to 0/1 1321 val = int(val) 1322 elif isinstance(val, str): 1323 val = '"' + val + '"' 1324 1325 # Sources are variable name & value (packaged in SCons Value nodes) 1326 return ([target], [Value(variable), Value(val)]) 1327 1328config_builder = Builder(emitter = config_emitter, action = config_action) 1329 1330main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1331 1332# libelf build is shared across all configs in the build root. 1333main.SConscript('ext/libelf/SConscript', 1334 variant_dir = joinpath(build_root, 'libelf')) 1335 1336# iostream3 build is shared across all configs in the build root. 1337main.SConscript('ext/iostream3/SConscript', 1338 variant_dir = joinpath(build_root, 'iostream3')) 1339 1340# libfdt build is shared across all configs in the build root. 1341main.SConscript('ext/libfdt/SConscript', 1342 variant_dir = joinpath(build_root, 'libfdt')) 1343 1344# fputils build is shared across all configs in the build root. 1345main.SConscript('ext/fputils/SConscript', 1346 variant_dir = joinpath(build_root, 'fputils')) 1347 1348# DRAMSim2 build is shared across all configs in the build root. 1349main.SConscript('ext/dramsim2/SConscript', 1350 variant_dir = joinpath(build_root, 'dramsim2')) 1351 1352# DRAMPower build is shared across all configs in the build root. 1353main.SConscript('ext/drampower/SConscript', 1354 variant_dir = joinpath(build_root, 'drampower')) 1355 1356# nomali build is shared across all configs in the build root. 1357main.SConscript('ext/nomali/SConscript', 1358 variant_dir = joinpath(build_root, 'nomali')) 1359 1360################################################### 1361# 1362# This function is used to set up a directory with switching headers 1363# 1364################################################### 1365 1366main['ALL_ISA_LIST'] = all_isa_list 1367main['ALL_GPU_ISA_LIST'] = all_gpu_isa_list 1368all_isa_deps = {} 1369def make_switching_dir(dname, switch_headers, env): 1370 # Generate the header. target[0] is the full path of the output 1371 # header to generate. 'source' is a dummy variable, since we get the 1372 # list of ISAs from env['ALL_ISA_LIST']. 1373 def gen_switch_hdr(target, source, env): 1374 fname = str(target[0]) 1375 isa = env['TARGET_ISA'].lower() 1376 try: 1377 f = open(fname, 'w') 1378 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1379 f.close() 1380 except IOError: 1381 print "Failed to create %s" % fname 1382 raise 1383 1384 # Build SCons Action object. 'varlist' specifies env vars that this 1385 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1386 # should get re-executed. 1387 switch_hdr_action = MakeAction(gen_switch_hdr, 1388 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 1389 1390 # Instantiate actions for each header 1391 for hdr in switch_headers: 1392 env.Command(hdr, [], switch_hdr_action) 1393 1394 isa_target = Dir('.').up().name.lower().replace('_', '-') 1395 env['PHONY_BASE'] = '#'+isa_target 1396 all_isa_deps[isa_target] = None 1397 1398Export('make_switching_dir') 1399 1400def make_gpu_switching_dir(dname, switch_headers, env): 1401 # Generate the header. target[0] is the full path of the output 1402 # header to generate. 'source' is a dummy variable, since we get the 1403 # list of ISAs from env['ALL_ISA_LIST']. 1404 def gen_switch_hdr(target, source, env): 1405 fname = str(target[0]) 1406 1407 isa = env['TARGET_GPU_ISA'].lower() 1408 1409 try: 1410 f = open(fname, 'w') 1411 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1412 f.close() 1413 except IOError: 1414 print "Failed to create %s" % fname 1415 raise 1416 1417 # Build SCons Action object. 'varlist' specifies env vars that this 1418 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1419 # should get re-executed. 1420 switch_hdr_action = MakeAction(gen_switch_hdr, 1421 Transform("GENERATE"), varlist=['ALL_ISA_GPU_LIST']) 1422 1423 # Instantiate actions for each header 1424 for hdr in switch_headers: 1425 env.Command(hdr, [], switch_hdr_action) 1426 1427Export('make_gpu_switching_dir') 1428 1429# all-isas -> all-deps -> all-environs -> all_targets 1430main.Alias('#all-isas', []) 1431main.Alias('#all-deps', '#all-isas') 1432 1433# Dummy target to ensure all environments are created before telling 1434# SCons what to actually make (the command line arguments). We attach 1435# them to the dependence graph after the environments are complete. 1436ORIG_BUILD_TARGETS = list(BUILD_TARGETS) # force a copy; gets closure to work. 1437def environsComplete(target, source, env): 1438 for t in ORIG_BUILD_TARGETS: 1439 main.Depends('#all-targets', t) 1440 1441# Each build/* switching_dir attaches its *-environs target to #all-environs. 1442main.Append(BUILDERS = {'CompleteEnvirons' : 1443 Builder(action=MakeAction(environsComplete, None))}) 1444main.CompleteEnvirons('#all-environs', []) 1445 1446def doNothing(**ignored): pass 1447main.Append(BUILDERS = {'Dummy': Builder(action=MakeAction(doNothing, None))}) 1448 1449# The final target to which all the original targets ultimately get attached. 1450main.Dummy('#all-targets', '#all-environs') 1451BUILD_TARGETS[:] = ['#all-targets'] 1452 1453################################################### 1454# 1455# Define build environments for selected configurations. 1456# 1457################################################### 1458 1459for variant_path in variant_paths: 1460 if not GetOption('silent'): 1461 print "Building in", variant_path 1462 1463 # Make a copy of the build-root environment to use for this config. 1464 env = main.Clone() 1465 env['BUILDDIR'] = variant_path 1466 1467 # variant_dir is the tail component of build path, and is used to 1468 # determine the build parameters (e.g., 'ALPHA_SE') 1469 (build_root, variant_dir) = splitpath(variant_path) 1470 1471 # Set env variables according to the build directory config. 1472 sticky_vars.files = [] 1473 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1474 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1475 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1476 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1477 if isfile(current_vars_file): 1478 sticky_vars.files.append(current_vars_file) 1479 if not GetOption('silent'): 1480 print "Using saved variables file %s" % current_vars_file 1481 else: 1482 # Build dir-specific variables file doesn't exist. 1483 1484 # Make sure the directory is there so we can create it later 1485 opt_dir = dirname(current_vars_file) 1486 if not isdir(opt_dir): 1487 mkdir(opt_dir) 1488 1489 # Get default build variables from source tree. Variables are 1490 # normally determined by name of $VARIANT_DIR, but can be 1491 # overridden by '--default=' arg on command line. 1492 default = GetOption('default') 1493 opts_dir = joinpath(main.root.abspath, 'build_opts') 1494 if default: 1495 default_vars_files = [joinpath(build_root, 'variables', default), 1496 joinpath(opts_dir, default)] 1497 else: 1498 default_vars_files = [joinpath(opts_dir, variant_dir)] 1499 existing_files = filter(isfile, default_vars_files) 1500 if existing_files: 1501 default_vars_file = existing_files[0] 1502 sticky_vars.files.append(default_vars_file) 1503 print "Variables file %s not found,\n using defaults in %s" \ 1504 % (current_vars_file, default_vars_file) 1505 else: 1506 print "Error: cannot find variables file %s or " \ 1507 "default file(s) %s" \ 1508 % (current_vars_file, ' or '.join(default_vars_files)) 1509 Exit(1) 1510 1511 # Apply current variable settings to env 1512 sticky_vars.Update(env) 1513 1514 help_texts["local_vars"] += \ 1515 "Build variables for %s:\n" % variant_dir \ 1516 + sticky_vars.GenerateHelpText(env) 1517 1518 # Process variable settings. 1519 1520 if not have_fenv and env['USE_FENV']: 1521 print "Warning: <fenv.h> not available; " \ 1522 "forcing USE_FENV to False in", variant_dir + "." 1523 env['USE_FENV'] = False 1524 1525 if not env['USE_FENV']: 1526 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1527 print " FP results may deviate slightly from other platforms." 1528 1529 if env['EFENCE']: 1530 env.Append(LIBS=['efence']) 1531 1532 if env['USE_KVM']: 1533 if not have_kvm: 1534 print "Warning: Can not enable KVM, host seems to lack KVM support" 1535 env['USE_KVM'] = False 1536 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1537 print "Info: KVM support disabled due to unsupported host and " \ 1538 "target ISA combination" 1539 env['USE_KVM'] = False 1540 1541 if env['BUILD_GPU']: 1542 env.Append(CPPDEFINES=['BUILD_GPU']) 1543 1544 # Warn about missing optional functionality 1545 if env['USE_KVM']: 1546 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1547 print "Warning: perf_event headers lack support for the " \ 1548 "exclude_host attribute. KVM instruction counts will " \ 1549 "be inaccurate." 1550 1551 # Save sticky variable settings back to current variables file 1552 sticky_vars.Save(current_vars_file, env) 1553 1554 if env['USE_SSE2']: 1555 env.Append(CCFLAGS=['-msse2']) 1556 1557 # The src/SConscript file sets up the build rules in 'env' according 1558 # to the configured variables. It returns a list of environments, 1559 # one for each variant build (debug, opt, etc.) 1560 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env') 1561 1562def pairwise(iterable): 1563 "s -> (s0,s1), (s1,s2), (s2, s3), ..." 1564 a, b = itertools.tee(iterable) 1565 b.next() 1566 return itertools.izip(a, b) 1567 1568# Create false dependencies so SCons will parse ISAs, establish 1569# dependencies, and setup the build Environments serially. Either 1570# SCons (likely) and/or our SConscripts (possibly) cannot cope with -j 1571# greater than 1. It appears to be standard race condition stuff; it 1572# doesn't always fail, but usually, and the behaviors are different. 1573# Every time I tried to remove this, builds would fail in some 1574# creative new way. So, don't do that. You'll want to, though, because 1575# tests/SConscript takes a long time to make its Environments. 1576for t1, t2 in pairwise(sorted(all_isa_deps.iterkeys())): 1577 main.Depends('#%s-deps' % t2, '#%s-deps' % t1) 1578 main.Depends('#%s-environs' % t2, '#%s-environs' % t1) 1579 1580# base help text 1581Help(''' 1582Usage: scons [scons options] [build variables] [target(s)] 1583 1584Extra scons options: 1585%(options)s 1586 1587Global build variables: 1588%(global_vars)s 1589 1590%(local_vars)s 1591''' % help_texts) 1592