SimObject.py revision 10001:61763318c788
1# Copyright (c) 2012 ARM Limited 2# All rights reserved. 3# 4# The license below extends only to copyright in the software and shall 5# not be construed as granting a license to any other intellectual 6# property including but not limited to intellectual property relating 7# to a hardware implementation of the functionality of the software 8# licensed hereunder. You may use the software subject to the license 9# terms below provided that you ensure that this notice is replicated 10# unmodified and in its entirety in all distributions of the software, 11# modified or unmodified, in source code or in binary form. 12# 13# Copyright (c) 2004-2006 The Regents of The University of Michigan 14# Copyright (c) 2010-20013 Advanced Micro Devices, Inc. 15# Copyright (c) 2013 Mark D. Hill and David A. Wood 16# All rights reserved. 17# 18# Redistribution and use in source and binary forms, with or without 19# modification, are permitted provided that the following conditions are 20# met: redistributions of source code must retain the above copyright 21# notice, this list of conditions and the following disclaimer; 22# redistributions in binary form must reproduce the above copyright 23# notice, this list of conditions and the following disclaimer in the 24# documentation and/or other materials provided with the distribution; 25# neither the name of the copyright holders nor the names of its 26# contributors may be used to endorse or promote products derived from 27# this software without specific prior written permission. 28# 29# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 30# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 31# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 32# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 33# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 34# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 35# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 36# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 37# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 38# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 39# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 40# 41# Authors: Steve Reinhardt 42# Nathan Binkert 43# Andreas Hansson 44 45import sys 46from types import FunctionType, MethodType, ModuleType 47 48import m5 49from m5.util import * 50 51# Have to import params up top since Param is referenced on initial 52# load (when SimObject class references Param to create a class 53# variable, the 'name' param)... 54from m5.params import * 55# There are a few things we need that aren't in params.__all__ since 56# normal users don't need them 57from m5.params import ParamDesc, VectorParamDesc, \ 58 isNullPointer, SimObjectVector, Port 59 60from m5.proxy import * 61from m5.proxy import isproxy 62 63##################################################################### 64# 65# M5 Python Configuration Utility 66# 67# The basic idea is to write simple Python programs that build Python 68# objects corresponding to M5 SimObjects for the desired simulation 69# configuration. For now, the Python emits a .ini file that can be 70# parsed by M5. In the future, some tighter integration between M5 71# and the Python interpreter may allow bypassing the .ini file. 72# 73# Each SimObject class in M5 is represented by a Python class with the 74# same name. The Python inheritance tree mirrors the M5 C++ tree 75# (e.g., SimpleCPU derives from BaseCPU in both cases, and all 76# SimObjects inherit from a single SimObject base class). To specify 77# an instance of an M5 SimObject in a configuration, the user simply 78# instantiates the corresponding Python object. The parameters for 79# that SimObject are given by assigning to attributes of the Python 80# object, either using keyword assignment in the constructor or in 81# separate assignment statements. For example: 82# 83# cache = BaseCache(size='64KB') 84# cache.hit_latency = 3 85# cache.assoc = 8 86# 87# The magic lies in the mapping of the Python attributes for SimObject 88# classes to the actual SimObject parameter specifications. This 89# allows parameter validity checking in the Python code. Continuing 90# the example above, the statements "cache.blurfl=3" or 91# "cache.assoc='hello'" would both result in runtime errors in Python, 92# since the BaseCache object has no 'blurfl' parameter and the 'assoc' 93# parameter requires an integer, respectively. This magic is done 94# primarily by overriding the special __setattr__ method that controls 95# assignment to object attributes. 96# 97# Once a set of Python objects have been instantiated in a hierarchy, 98# calling 'instantiate(obj)' (where obj is the root of the hierarchy) 99# will generate a .ini file. 100# 101##################################################################### 102 103# list of all SimObject classes 104allClasses = {} 105 106# dict to look up SimObjects based on path 107instanceDict = {} 108 109# Did any of the SimObjects lack a header file? 110noCxxHeader = False 111 112def public_value(key, value): 113 return key.startswith('_') or \ 114 isinstance(value, (FunctionType, MethodType, ModuleType, 115 classmethod, type)) 116 117# The metaclass for SimObject. This class controls how new classes 118# that derive from SimObject are instantiated, and provides inherited 119# class behavior (just like a class controls how instances of that 120# class are instantiated, and provides inherited instance behavior). 121class MetaSimObject(type): 122 # Attributes that can be set only at initialization time 123 init_keywords = { 'abstract' : bool, 124 'cxx_class' : str, 125 'cxx_type' : str, 126 'cxx_header' : str, 127 'type' : str, 128 'cxx_bases' : list } 129 # Attributes that can be set any time 130 keywords = { 'check' : FunctionType } 131 132 # __new__ is called before __init__, and is where the statements 133 # in the body of the class definition get loaded into the class's 134 # __dict__. We intercept this to filter out parameter & port assignments 135 # and only allow "private" attributes to be passed to the base 136 # __new__ (starting with underscore). 137 def __new__(mcls, name, bases, dict): 138 assert name not in allClasses, "SimObject %s already present" % name 139 140 # Copy "private" attributes, functions, and classes to the 141 # official dict. Everything else goes in _init_dict to be 142 # filtered in __init__. 143 cls_dict = {} 144 value_dict = {} 145 for key,val in dict.items(): 146 if public_value(key, val): 147 cls_dict[key] = val 148 else: 149 # must be a param/port setting 150 value_dict[key] = val 151 if 'abstract' not in value_dict: 152 value_dict['abstract'] = False 153 if 'cxx_bases' not in value_dict: 154 value_dict['cxx_bases'] = [] 155 cls_dict['_value_dict'] = value_dict 156 cls = super(MetaSimObject, mcls).__new__(mcls, name, bases, cls_dict) 157 if 'type' in value_dict: 158 allClasses[name] = cls 159 return cls 160 161 # subclass initialization 162 def __init__(cls, name, bases, dict): 163 # calls type.__init__()... I think that's a no-op, but leave 164 # it here just in case it's not. 165 super(MetaSimObject, cls).__init__(name, bases, dict) 166 167 # initialize required attributes 168 169 # class-only attributes 170 cls._params = multidict() # param descriptions 171 cls._ports = multidict() # port descriptions 172 173 # class or instance attributes 174 cls._values = multidict() # param values 175 cls._children = multidict() # SimObject children 176 cls._port_refs = multidict() # port ref objects 177 cls._instantiated = False # really instantiated, cloned, or subclassed 178 179 # We don't support multiple inheritance of sim objects. If you want 180 # to, you must fix multidict to deal with it properly. Non sim-objects 181 # are ok, though 182 bTotal = 0 183 for c in bases: 184 if isinstance(c, MetaSimObject): 185 bTotal += 1 186 if bTotal > 1: 187 raise TypeError, "SimObjects do not support multiple inheritance" 188 189 base = bases[0] 190 191 # Set up general inheritance via multidicts. A subclass will 192 # inherit all its settings from the base class. The only time 193 # the following is not true is when we define the SimObject 194 # class itself (in which case the multidicts have no parent). 195 if isinstance(base, MetaSimObject): 196 cls._base = base 197 cls._params.parent = base._params 198 cls._ports.parent = base._ports 199 cls._values.parent = base._values 200 cls._children.parent = base._children 201 cls._port_refs.parent = base._port_refs 202 # mark base as having been subclassed 203 base._instantiated = True 204 else: 205 cls._base = None 206 207 # default keyword values 208 if 'type' in cls._value_dict: 209 if 'cxx_class' not in cls._value_dict: 210 cls._value_dict['cxx_class'] = cls._value_dict['type'] 211 212 cls._value_dict['cxx_type'] = '%s *' % cls._value_dict['cxx_class'] 213 214 if 'cxx_header' not in cls._value_dict: 215 global noCxxHeader 216 noCxxHeader = True 217 warn("No header file specified for SimObject: %s", name) 218 219 # Export methods are automatically inherited via C++, so we 220 # don't want the method declarations to get inherited on the 221 # python side (and thus end up getting repeated in the wrapped 222 # versions of derived classes). The code below basicallly 223 # suppresses inheritance by substituting in the base (null) 224 # versions of these methods unless a different version is 225 # explicitly supplied. 226 for method_name in ('export_methods', 'export_method_cxx_predecls', 227 'export_method_swig_predecls'): 228 if method_name not in cls.__dict__: 229 base_method = getattr(MetaSimObject, method_name) 230 m = MethodType(base_method, cls, MetaSimObject) 231 setattr(cls, method_name, m) 232 233 # Now process the _value_dict items. They could be defining 234 # new (or overriding existing) parameters or ports, setting 235 # class keywords (e.g., 'abstract'), or setting parameter 236 # values or port bindings. The first 3 can only be set when 237 # the class is defined, so we handle them here. The others 238 # can be set later too, so just emulate that by calling 239 # setattr(). 240 for key,val in cls._value_dict.items(): 241 # param descriptions 242 if isinstance(val, ParamDesc): 243 cls._new_param(key, val) 244 245 # port objects 246 elif isinstance(val, Port): 247 cls._new_port(key, val) 248 249 # init-time-only keywords 250 elif cls.init_keywords.has_key(key): 251 cls._set_keyword(key, val, cls.init_keywords[key]) 252 253 # default: use normal path (ends up in __setattr__) 254 else: 255 setattr(cls, key, val) 256 257 def _set_keyword(cls, keyword, val, kwtype): 258 if not isinstance(val, kwtype): 259 raise TypeError, 'keyword %s has bad type %s (expecting %s)' % \ 260 (keyword, type(val), kwtype) 261 if isinstance(val, FunctionType): 262 val = classmethod(val) 263 type.__setattr__(cls, keyword, val) 264 265 def _new_param(cls, name, pdesc): 266 # each param desc should be uniquely assigned to one variable 267 assert(not hasattr(pdesc, 'name')) 268 pdesc.name = name 269 cls._params[name] = pdesc 270 if hasattr(pdesc, 'default'): 271 cls._set_param(name, pdesc.default, pdesc) 272 273 def _set_param(cls, name, value, param): 274 assert(param.name == name) 275 try: 276 value = param.convert(value) 277 except Exception, e: 278 msg = "%s\nError setting param %s.%s to %s\n" % \ 279 (e, cls.__name__, name, value) 280 e.args = (msg, ) 281 raise 282 cls._values[name] = value 283 # if param value is a SimObject, make it a child too, so that 284 # it gets cloned properly when the class is instantiated 285 if isSimObjectOrVector(value) and not value.has_parent(): 286 cls._add_cls_child(name, value) 287 288 def _add_cls_child(cls, name, child): 289 # It's a little funky to have a class as a parent, but these 290 # objects should never be instantiated (only cloned, which 291 # clears the parent pointer), and this makes it clear that the 292 # object is not an orphan and can provide better error 293 # messages. 294 child.set_parent(cls, name) 295 cls._children[name] = child 296 297 def _new_port(cls, name, port): 298 # each port should be uniquely assigned to one variable 299 assert(not hasattr(port, 'name')) 300 port.name = name 301 cls._ports[name] = port 302 303 # same as _get_port_ref, effectively, but for classes 304 def _cls_get_port_ref(cls, attr): 305 # Return reference that can be assigned to another port 306 # via __setattr__. There is only ever one reference 307 # object per port, but we create them lazily here. 308 ref = cls._port_refs.get(attr) 309 if not ref: 310 ref = cls._ports[attr].makeRef(cls) 311 cls._port_refs[attr] = ref 312 return ref 313 314 # Set attribute (called on foo.attr = value when foo is an 315 # instance of class cls). 316 def __setattr__(cls, attr, value): 317 # normal processing for private attributes 318 if public_value(attr, value): 319 type.__setattr__(cls, attr, value) 320 return 321 322 if cls.keywords.has_key(attr): 323 cls._set_keyword(attr, value, cls.keywords[attr]) 324 return 325 326 if cls._ports.has_key(attr): 327 cls._cls_get_port_ref(attr).connect(value) 328 return 329 330 if isSimObjectOrSequence(value) and cls._instantiated: 331 raise RuntimeError, \ 332 "cannot set SimObject parameter '%s' after\n" \ 333 " class %s has been instantiated or subclassed" \ 334 % (attr, cls.__name__) 335 336 # check for param 337 param = cls._params.get(attr) 338 if param: 339 cls._set_param(attr, value, param) 340 return 341 342 if isSimObjectOrSequence(value): 343 # If RHS is a SimObject, it's an implicit child assignment. 344 cls._add_cls_child(attr, coerceSimObjectOrVector(value)) 345 return 346 347 # no valid assignment... raise exception 348 raise AttributeError, \ 349 "Class %s has no parameter \'%s\'" % (cls.__name__, attr) 350 351 def __getattr__(cls, attr): 352 if attr == 'cxx_class_path': 353 return cls.cxx_class.split('::') 354 355 if attr == 'cxx_class_name': 356 return cls.cxx_class_path[-1] 357 358 if attr == 'cxx_namespaces': 359 return cls.cxx_class_path[:-1] 360 361 if cls._values.has_key(attr): 362 return cls._values[attr] 363 364 if cls._children.has_key(attr): 365 return cls._children[attr] 366 367 raise AttributeError, \ 368 "object '%s' has no attribute '%s'" % (cls.__name__, attr) 369 370 def __str__(cls): 371 return cls.__name__ 372 373 # See ParamValue.cxx_predecls for description. 374 def cxx_predecls(cls, code): 375 code('#include "params/$cls.hh"') 376 377 # See ParamValue.swig_predecls for description. 378 def swig_predecls(cls, code): 379 code('%import "python/m5/internal/param_$cls.i"') 380 381 # Hook for exporting additional C++ methods to Python via SWIG. 382 # Default is none, override using @classmethod in class definition. 383 def export_methods(cls, code): 384 pass 385 386 # Generate the code needed as a prerequisite for the C++ methods 387 # exported via export_methods() to be compiled in the _wrap.cc 388 # file. Typically generates one or more #include statements. If 389 # any methods are exported, typically at least the C++ header 390 # declaring the relevant SimObject class must be included. 391 def export_method_cxx_predecls(cls, code): 392 pass 393 394 # Generate the code needed as a prerequisite for the C++ methods 395 # exported via export_methods() to be processed by SWIG. 396 # Typically generates one or more %include or %import statements. 397 # If any methods are exported, typically at least the C++ header 398 # declaring the relevant SimObject class must be included. 399 def export_method_swig_predecls(cls, code): 400 pass 401 402 # Generate the declaration for this object for wrapping with SWIG. 403 # Generates code that goes into a SWIG .i file. Called from 404 # src/SConscript. 405 def swig_decl(cls, code): 406 class_path = cls.cxx_class.split('::') 407 classname = class_path[-1] 408 namespaces = class_path[:-1] 409 410 # The 'local' attribute restricts us to the params declared in 411 # the object itself, not including inherited params (which 412 # will also be inherited from the base class's param struct 413 # here). 414 params = cls._params.local.values() 415 ports = cls._ports.local 416 417 code('%module(package="m5.internal") param_$cls') 418 code() 419 code('%{') 420 code('#include "sim/sim_object.hh"') 421 code('#include "params/$cls.hh"') 422 for param in params: 423 param.cxx_predecls(code) 424 code('#include "${{cls.cxx_header}}"') 425 cls.export_method_cxx_predecls(code) 426 code('''\ 427/** 428 * This is a workaround for bug in swig. Prior to gcc 4.6.1 the STL 429 * headers like vector, string, etc. used to automatically pull in 430 * the cstddef header but starting with gcc 4.6.1 they no longer do. 431 * This leads to swig generated a file that does not compile so we 432 * explicitly include cstddef. Additionally, including version 2.0.4, 433 * swig uses ptrdiff_t without the std:: namespace prefix which is 434 * required with gcc 4.6.1. We explicitly provide access to it. 435 */ 436#include <cstddef> 437using std::ptrdiff_t; 438''') 439 code('%}') 440 code() 441 442 for param in params: 443 param.swig_predecls(code) 444 cls.export_method_swig_predecls(code) 445 446 code() 447 if cls._base: 448 code('%import "python/m5/internal/param_${{cls._base}}.i"') 449 code() 450 451 for ns in namespaces: 452 code('namespace $ns {') 453 454 if namespaces: 455 code('// avoid name conflicts') 456 sep_string = '_COLONS_' 457 flat_name = sep_string.join(class_path) 458 code('%rename($flat_name) $classname;') 459 460 code() 461 code('// stop swig from creating/wrapping default ctor/dtor') 462 code('%nodefault $classname;') 463 code('class $classname') 464 if cls._base: 465 bases = [ cls._base.cxx_class ] + cls.cxx_bases 466 else: 467 bases = cls.cxx_bases 468 base_first = True 469 for base in bases: 470 if base_first: 471 code(' : public ${{base}}') 472 base_first = False 473 else: 474 code(' , public ${{base}}') 475 476 code('{') 477 code(' public:') 478 cls.export_methods(code) 479 code('};') 480 481 for ns in reversed(namespaces): 482 code('} // namespace $ns') 483 484 code() 485 code('%include "params/$cls.hh"') 486 487 488 # Generate the C++ declaration (.hh file) for this SimObject's 489 # param struct. Called from src/SConscript. 490 def cxx_param_decl(cls, code): 491 # The 'local' attribute restricts us to the params declared in 492 # the object itself, not including inherited params (which 493 # will also be inherited from the base class's param struct 494 # here). 495 params = cls._params.local.values() 496 ports = cls._ports.local 497 try: 498 ptypes = [p.ptype for p in params] 499 except: 500 print cls, p, p.ptype_str 501 print params 502 raise 503 504 class_path = cls._value_dict['cxx_class'].split('::') 505 506 code('''\ 507#ifndef __PARAMS__${cls}__ 508#define __PARAMS__${cls}__ 509 510''') 511 512 # A forward class declaration is sufficient since we are just 513 # declaring a pointer. 514 for ns in class_path[:-1]: 515 code('namespace $ns {') 516 code('class $0;', class_path[-1]) 517 for ns in reversed(class_path[:-1]): 518 code('} // namespace $ns') 519 code() 520 521 # The base SimObject has a couple of params that get 522 # automatically set from Python without being declared through 523 # the normal Param mechanism; we slip them in here (needed 524 # predecls now, actual declarations below) 525 if cls == SimObject: 526 code(''' 527#ifndef PY_VERSION 528struct PyObject; 529#endif 530 531#include <string> 532''') 533 for param in params: 534 param.cxx_predecls(code) 535 for port in ports.itervalues(): 536 port.cxx_predecls(code) 537 code() 538 539 if cls._base: 540 code('#include "params/${{cls._base.type}}.hh"') 541 code() 542 543 for ptype in ptypes: 544 if issubclass(ptype, Enum): 545 code('#include "enums/${{ptype.__name__}}.hh"') 546 code() 547 548 # now generate the actual param struct 549 code("struct ${cls}Params") 550 if cls._base: 551 code(" : public ${{cls._base.type}}Params") 552 code("{") 553 if not hasattr(cls, 'abstract') or not cls.abstract: 554 if 'type' in cls.__dict__: 555 code(" ${{cls.cxx_type}} create();") 556 557 code.indent() 558 if cls == SimObject: 559 code(''' 560 SimObjectParams() {} 561 virtual ~SimObjectParams() {} 562 563 std::string name; 564 PyObject *pyobj; 565 ''') 566 for param in params: 567 param.cxx_decl(code) 568 for port in ports.itervalues(): 569 port.cxx_decl(code) 570 571 code.dedent() 572 code('};') 573 574 code() 575 code('#endif // __PARAMS__${cls}__') 576 return code 577 578 579# This *temporary* definition is required to support calls from the 580# SimObject class definition to the MetaSimObject methods (in 581# particular _set_param, which gets called for parameters with default 582# values defined on the SimObject class itself). It will get 583# overridden by the permanent definition (which requires that 584# SimObject be defined) lower in this file. 585def isSimObjectOrVector(value): 586 return False 587 588# The SimObject class is the root of the special hierarchy. Most of 589# the code in this class deals with the configuration hierarchy itself 590# (parent/child node relationships). 591class SimObject(object): 592 # Specify metaclass. Any class inheriting from SimObject will 593 # get this metaclass. 594 __metaclass__ = MetaSimObject 595 type = 'SimObject' 596 abstract = True 597 598 cxx_header = "sim/sim_object.hh" 599 cxx_bases = [ "Drainable", "Serializable" ] 600 eventq_index = Param.UInt32(Parent.eventq_index, "Event Queue Index") 601 602 @classmethod 603 def export_method_swig_predecls(cls, code): 604 code(''' 605%include <std_string.i> 606 607%import "python/swig/drain.i" 608%import "python/swig/serialize.i" 609''') 610 611 @classmethod 612 def export_methods(cls, code): 613 code(''' 614 void init(); 615 void loadState(Checkpoint *cp); 616 void initState(); 617 void regStats(); 618 void resetStats(); 619 void startup(); 620''') 621 622 # Initialize new instance. For objects with SimObject-valued 623 # children, we need to recursively clone the classes represented 624 # by those param values as well in a consistent "deep copy"-style 625 # fashion. That is, we want to make sure that each instance is 626 # cloned only once, and that if there are multiple references to 627 # the same original object, we end up with the corresponding 628 # cloned references all pointing to the same cloned instance. 629 def __init__(self, **kwargs): 630 ancestor = kwargs.get('_ancestor') 631 memo_dict = kwargs.get('_memo') 632 if memo_dict is None: 633 # prepare to memoize any recursively instantiated objects 634 memo_dict = {} 635 elif ancestor: 636 # memoize me now to avoid problems with recursive calls 637 memo_dict[ancestor] = self 638 639 if not ancestor: 640 ancestor = self.__class__ 641 ancestor._instantiated = True 642 643 # initialize required attributes 644 self._parent = None 645 self._name = None 646 self._ccObject = None # pointer to C++ object 647 self._ccParams = None 648 self._instantiated = False # really "cloned" 649 650 # Clone children specified at class level. No need for a 651 # multidict here since we will be cloning everything. 652 # Do children before parameter values so that children that 653 # are also param values get cloned properly. 654 self._children = {} 655 for key,val in ancestor._children.iteritems(): 656 self.add_child(key, val(_memo=memo_dict)) 657 658 # Inherit parameter values from class using multidict so 659 # individual value settings can be overridden but we still 660 # inherit late changes to non-overridden class values. 661 self._values = multidict(ancestor._values) 662 # clone SimObject-valued parameters 663 for key,val in ancestor._values.iteritems(): 664 val = tryAsSimObjectOrVector(val) 665 if val is not None: 666 self._values[key] = val(_memo=memo_dict) 667 668 # clone port references. no need to use a multidict here 669 # since we will be creating new references for all ports. 670 self._port_refs = {} 671 for key,val in ancestor._port_refs.iteritems(): 672 self._port_refs[key] = val.clone(self, memo_dict) 673 # apply attribute assignments from keyword args, if any 674 for key,val in kwargs.iteritems(): 675 setattr(self, key, val) 676 677 # "Clone" the current instance by creating another instance of 678 # this instance's class, but that inherits its parameter values 679 # and port mappings from the current instance. If we're in a 680 # "deep copy" recursive clone, check the _memo dict to see if 681 # we've already cloned this instance. 682 def __call__(self, **kwargs): 683 memo_dict = kwargs.get('_memo') 684 if memo_dict is None: 685 # no memo_dict: must be top-level clone operation. 686 # this is only allowed at the root of a hierarchy 687 if self._parent: 688 raise RuntimeError, "attempt to clone object %s " \ 689 "not at the root of a tree (parent = %s)" \ 690 % (self, self._parent) 691 # create a new dict and use that. 692 memo_dict = {} 693 kwargs['_memo'] = memo_dict 694 elif memo_dict.has_key(self): 695 # clone already done & memoized 696 return memo_dict[self] 697 return self.__class__(_ancestor = self, **kwargs) 698 699 def _get_port_ref(self, attr): 700 # Return reference that can be assigned to another port 701 # via __setattr__. There is only ever one reference 702 # object per port, but we create them lazily here. 703 ref = self._port_refs.get(attr) 704 if ref == None: 705 ref = self._ports[attr].makeRef(self) 706 self._port_refs[attr] = ref 707 return ref 708 709 def __getattr__(self, attr): 710 if self._ports.has_key(attr): 711 return self._get_port_ref(attr) 712 713 if self._values.has_key(attr): 714 return self._values[attr] 715 716 if self._children.has_key(attr): 717 return self._children[attr] 718 719 # If the attribute exists on the C++ object, transparently 720 # forward the reference there. This is typically used for 721 # SWIG-wrapped methods such as init(), regStats(), 722 # resetStats(), startup(), drain(), and 723 # resume(). 724 if self._ccObject and hasattr(self._ccObject, attr): 725 return getattr(self._ccObject, attr) 726 727 raise AttributeError, "object '%s' has no attribute '%s'" \ 728 % (self.__class__.__name__, attr) 729 730 # Set attribute (called on foo.attr = value when foo is an 731 # instance of class cls). 732 def __setattr__(self, attr, value): 733 # normal processing for private attributes 734 if attr.startswith('_'): 735 object.__setattr__(self, attr, value) 736 return 737 738 if self._ports.has_key(attr): 739 # set up port connection 740 self._get_port_ref(attr).connect(value) 741 return 742 743 param = self._params.get(attr) 744 if param: 745 try: 746 value = param.convert(value) 747 except Exception, e: 748 msg = "%s\nError setting param %s.%s to %s\n" % \ 749 (e, self.__class__.__name__, attr, value) 750 e.args = (msg, ) 751 raise 752 self._values[attr] = value 753 # implicitly parent unparented objects assigned as params 754 if isSimObjectOrVector(value) and not value.has_parent(): 755 self.add_child(attr, value) 756 return 757 758 # if RHS is a SimObject, it's an implicit child assignment 759 if isSimObjectOrSequence(value): 760 self.add_child(attr, value) 761 return 762 763 # no valid assignment... raise exception 764 raise AttributeError, "Class %s has no parameter %s" \ 765 % (self.__class__.__name__, attr) 766 767 768 # this hack allows tacking a '[0]' onto parameters that may or may 769 # not be vectors, and always getting the first element (e.g. cpus) 770 def __getitem__(self, key): 771 if key == 0: 772 return self 773 raise TypeError, "Non-zero index '%s' to SimObject" % key 774 775 # Also implemented by SimObjectVector 776 def clear_parent(self, old_parent): 777 assert self._parent is old_parent 778 self._parent = None 779 780 # Also implemented by SimObjectVector 781 def set_parent(self, parent, name): 782 self._parent = parent 783 self._name = name 784 785 # Return parent object of this SimObject, not implemented by SimObjectVector 786 # because the elements in a SimObjectVector may not share the same parent 787 def get_parent(self): 788 return self._parent 789 790 # Also implemented by SimObjectVector 791 def get_name(self): 792 return self._name 793 794 # Also implemented by SimObjectVector 795 def has_parent(self): 796 return self._parent is not None 797 798 # clear out child with given name. This code is not likely to be exercised. 799 # See comment in add_child. 800 def clear_child(self, name): 801 child = self._children[name] 802 child.clear_parent(self) 803 del self._children[name] 804 805 # Add a new child to this object. 806 def add_child(self, name, child): 807 child = coerceSimObjectOrVector(child) 808 if child.has_parent(): 809 warn("add_child('%s'): child '%s' already has parent", name, 810 child.get_name()) 811 if self._children.has_key(name): 812 # This code path had an undiscovered bug that would make it fail 813 # at runtime. It had been here for a long time and was only 814 # exposed by a buggy script. Changes here will probably not be 815 # exercised without specialized testing. 816 self.clear_child(name) 817 child.set_parent(self, name) 818 self._children[name] = child 819 820 # Take SimObject-valued parameters that haven't been explicitly 821 # assigned as children and make them children of the object that 822 # they were assigned to as a parameter value. This guarantees 823 # that when we instantiate all the parameter objects we're still 824 # inside the configuration hierarchy. 825 def adoptOrphanParams(self): 826 for key,val in self._values.iteritems(): 827 if not isSimObjectVector(val) and isSimObjectSequence(val): 828 # need to convert raw SimObject sequences to 829 # SimObjectVector class so we can call has_parent() 830 val = SimObjectVector(val) 831 self._values[key] = val 832 if isSimObjectOrVector(val) and not val.has_parent(): 833 warn("%s adopting orphan SimObject param '%s'", self, key) 834 self.add_child(key, val) 835 836 def path(self): 837 if not self._parent: 838 return '<orphan %s>' % self.__class__ 839 ppath = self._parent.path() 840 if ppath == 'root': 841 return self._name 842 return ppath + "." + self._name 843 844 def __str__(self): 845 return self.path() 846 847 def ini_str(self): 848 return self.path() 849 850 def find_any(self, ptype): 851 if isinstance(self, ptype): 852 return self, True 853 854 found_obj = None 855 for child in self._children.itervalues(): 856 if isinstance(child, ptype): 857 if found_obj != None and child != found_obj: 858 raise AttributeError, \ 859 'parent.any matched more than one: %s %s' % \ 860 (found_obj.path, child.path) 861 found_obj = child 862 # search param space 863 for pname,pdesc in self._params.iteritems(): 864 if issubclass(pdesc.ptype, ptype): 865 match_obj = self._values[pname] 866 if found_obj != None and found_obj != match_obj: 867 raise AttributeError, \ 868 'parent.any matched more than one: %s and %s' % (found_obj.path, match_obj.path) 869 found_obj = match_obj 870 return found_obj, found_obj != None 871 872 def find_all(self, ptype): 873 all = {} 874 # search children 875 for child in self._children.itervalues(): 876 # a child could be a list, so ensure we visit each item 877 if isinstance(child, list): 878 children = child 879 else: 880 children = [child] 881 882 for child in children: 883 if isinstance(child, ptype) and not isproxy(child) and \ 884 not isNullPointer(child): 885 all[child] = True 886 if isSimObject(child): 887 # also add results from the child itself 888 child_all, done = child.find_all(ptype) 889 all.update(dict(zip(child_all, [done] * len(child_all)))) 890 # search param space 891 for pname,pdesc in self._params.iteritems(): 892 if issubclass(pdesc.ptype, ptype): 893 match_obj = self._values[pname] 894 if not isproxy(match_obj) and not isNullPointer(match_obj): 895 all[match_obj] = True 896 return all.keys(), True 897 898 def unproxy(self, base): 899 return self 900 901 def unproxyParams(self): 902 for param in self._params.iterkeys(): 903 value = self._values.get(param) 904 if value != None and isproxy(value): 905 try: 906 value = value.unproxy(self) 907 except: 908 print "Error in unproxying param '%s' of %s" % \ 909 (param, self.path()) 910 raise 911 setattr(self, param, value) 912 913 # Unproxy ports in sorted order so that 'append' operations on 914 # vector ports are done in a deterministic fashion. 915 port_names = self._ports.keys() 916 port_names.sort() 917 for port_name in port_names: 918 port = self._port_refs.get(port_name) 919 if port != None: 920 port.unproxy(self) 921 922 def print_ini(self, ini_file): 923 print >>ini_file, '[' + self.path() + ']' # .ini section header 924 925 instanceDict[self.path()] = self 926 927 if hasattr(self, 'type'): 928 print >>ini_file, 'type=%s' % self.type 929 930 if len(self._children.keys()): 931 print >>ini_file, 'children=%s' % \ 932 ' '.join(self._children[n].get_name() \ 933 for n in sorted(self._children.keys())) 934 935 for param in sorted(self._params.keys()): 936 value = self._values.get(param) 937 if value != None: 938 print >>ini_file, '%s=%s' % (param, 939 self._values[param].ini_str()) 940 941 for port_name in sorted(self._ports.keys()): 942 port = self._port_refs.get(port_name, None) 943 if port != None: 944 print >>ini_file, '%s=%s' % (port_name, port.ini_str()) 945 946 print >>ini_file # blank line between objects 947 948 # generate a tree of dictionaries expressing all the parameters in the 949 # instantiated system for use by scripts that want to do power, thermal 950 # visualization, and other similar tasks 951 def get_config_as_dict(self): 952 d = attrdict() 953 if hasattr(self, 'type'): 954 d.type = self.type 955 if hasattr(self, 'cxx_class'): 956 d.cxx_class = self.cxx_class 957 # Add the name and path of this object to be able to link to 958 # the stats 959 d.name = self.get_name() 960 d.path = self.path() 961 962 for param in sorted(self._params.keys()): 963 value = self._values.get(param) 964 if value != None: 965 try: 966 # Use native type for those supported by JSON and 967 # strings for everything else. skipkeys=True seems 968 # to not work as well as one would hope 969 if type(self._values[param].value) in \ 970 [str, unicode, int, long, float, bool, None]: 971 d[param] = self._values[param].value 972 else: 973 d[param] = str(self._values[param]) 974 975 except AttributeError: 976 pass 977 978 for n in sorted(self._children.keys()): 979 child = self._children[n] 980 # Use the name of the attribute (and not get_name()) as 981 # the key in the JSON dictionary to capture the hierarchy 982 # in the Python code that assembled this system 983 d[n] = child.get_config_as_dict() 984 985 for port_name in sorted(self._ports.keys()): 986 port = self._port_refs.get(port_name, None) 987 if port != None: 988 # Represent each port with a dictionary containing the 989 # prominent attributes 990 d[port_name] = port.get_config_as_dict() 991 992 return d 993 994 def getCCParams(self): 995 if self._ccParams: 996 return self._ccParams 997 998 cc_params_struct = getattr(m5.internal.params, '%sParams' % self.type) 999 cc_params = cc_params_struct() 1000 cc_params.pyobj = self 1001 cc_params.name = str(self) 1002 1003 param_names = self._params.keys() 1004 param_names.sort() 1005 for param in param_names: 1006 value = self._values.get(param) 1007 if value is None: 1008 fatal("%s.%s without default or user set value", 1009 self.path(), param) 1010 1011 value = value.getValue() 1012 if isinstance(self._params[param], VectorParamDesc): 1013 assert isinstance(value, list) 1014 vec = getattr(cc_params, param) 1015 assert not len(vec) 1016 for v in value: 1017 vec.append(v) 1018 else: 1019 setattr(cc_params, param, value) 1020 1021 port_names = self._ports.keys() 1022 port_names.sort() 1023 for port_name in port_names: 1024 port = self._port_refs.get(port_name, None) 1025 if port != None: 1026 port_count = len(port) 1027 else: 1028 port_count = 0 1029 setattr(cc_params, 'port_' + port_name + '_connection_count', 1030 port_count) 1031 self._ccParams = cc_params 1032 return self._ccParams 1033 1034 # Get C++ object corresponding to this object, calling C++ if 1035 # necessary to construct it. Does *not* recursively create 1036 # children. 1037 def getCCObject(self): 1038 if not self._ccObject: 1039 # Make sure this object is in the configuration hierarchy 1040 if not self._parent and not isRoot(self): 1041 raise RuntimeError, "Attempt to instantiate orphan node" 1042 # Cycles in the configuration hierarchy are not supported. This 1043 # will catch the resulting recursion and stop. 1044 self._ccObject = -1 1045 params = self.getCCParams() 1046 self._ccObject = params.create() 1047 elif self._ccObject == -1: 1048 raise RuntimeError, "%s: Cycle found in configuration hierarchy." \ 1049 % self.path() 1050 return self._ccObject 1051 1052 def descendants(self): 1053 yield self 1054 for child in self._children.itervalues(): 1055 for obj in child.descendants(): 1056 yield obj 1057 1058 # Call C++ to create C++ object corresponding to this object 1059 def createCCObject(self): 1060 self.getCCParams() 1061 self.getCCObject() # force creation 1062 1063 def getValue(self): 1064 return self.getCCObject() 1065 1066 # Create C++ port connections corresponding to the connections in 1067 # _port_refs 1068 def connectPorts(self): 1069 for portRef in self._port_refs.itervalues(): 1070 portRef.ccConnect() 1071 1072# Function to provide to C++ so it can look up instances based on paths 1073def resolveSimObject(name): 1074 obj = instanceDict[name] 1075 return obj.getCCObject() 1076 1077def isSimObject(value): 1078 return isinstance(value, SimObject) 1079 1080def isSimObjectClass(value): 1081 return issubclass(value, SimObject) 1082 1083def isSimObjectVector(value): 1084 return isinstance(value, SimObjectVector) 1085 1086def isSimObjectSequence(value): 1087 if not isinstance(value, (list, tuple)) or len(value) == 0: 1088 return False 1089 1090 for val in value: 1091 if not isNullPointer(val) and not isSimObject(val): 1092 return False 1093 1094 return True 1095 1096def isSimObjectOrSequence(value): 1097 return isSimObject(value) or isSimObjectSequence(value) 1098 1099def isRoot(obj): 1100 from m5.objects import Root 1101 return obj and obj is Root.getInstance() 1102 1103def isSimObjectOrVector(value): 1104 return isSimObject(value) or isSimObjectVector(value) 1105 1106def tryAsSimObjectOrVector(value): 1107 if isSimObjectOrVector(value): 1108 return value 1109 if isSimObjectSequence(value): 1110 return SimObjectVector(value) 1111 return None 1112 1113def coerceSimObjectOrVector(value): 1114 value = tryAsSimObjectOrVector(value) 1115 if value is None: 1116 raise TypeError, "SimObject or SimObjectVector expected" 1117 return value 1118 1119baseClasses = allClasses.copy() 1120baseInstances = instanceDict.copy() 1121 1122def clear(): 1123 global allClasses, instanceDict, noCxxHeader 1124 1125 allClasses = baseClasses.copy() 1126 instanceDict = baseInstances.copy() 1127 noCxxHeader = False 1128 1129# __all__ defines the list of symbols that get exported when 1130# 'from config import *' is invoked. Try to keep this reasonably 1131# short to avoid polluting other namespaces. 1132__all__ = [ 'SimObject' ] 1133