xbar.hh revision 11186
12381SN/A/* 210713Sandreas.hansson@arm.com * Copyright (c) 2011-2015 ARM Limited 38711SN/A * All rights reserved 48711SN/A * 58711SN/A * The license below extends only to copyright in the software and shall 68711SN/A * not be construed as granting a license to any other intellectual 78711SN/A * property including but not limited to intellectual property relating 88711SN/A * to a hardware implementation of the functionality of the software 98711SN/A * licensed hereunder. You may use the software subject to the license 108711SN/A * terms below provided that you ensure that this notice is replicated 118711SN/A * unmodified and in its entirety in all distributions of the software, 128711SN/A * modified or unmodified, in source code or in binary form. 138711SN/A * 142381SN/A * Copyright (c) 2002-2005 The Regents of The University of Michigan 152381SN/A * All rights reserved. 162381SN/A * 172381SN/A * Redistribution and use in source and binary forms, with or without 182381SN/A * modification, are permitted provided that the following conditions are 192381SN/A * met: redistributions of source code must retain the above copyright 202381SN/A * notice, this list of conditions and the following disclaimer; 212381SN/A * redistributions in binary form must reproduce the above copyright 222381SN/A * notice, this list of conditions and the following disclaimer in the 232381SN/A * documentation and/or other materials provided with the distribution; 242381SN/A * neither the name of the copyright holders nor the names of its 252381SN/A * contributors may be used to endorse or promote products derived from 262381SN/A * this software without specific prior written permission. 272381SN/A * 282381SN/A * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 292381SN/A * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 302381SN/A * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 312381SN/A * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 322381SN/A * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 332381SN/A * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 342381SN/A * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 352381SN/A * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 362381SN/A * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 372381SN/A * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 382381SN/A * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 392665SN/A * 402665SN/A * Authors: Ron Dreslinski 412772SN/A * Ali Saidi 428715SN/A * Andreas Hansson 438922SN/A * William Wang 442381SN/A */ 452381SN/A 462381SN/A/** 472982SN/A * @file 4810405Sandreas.hansson@arm.com * Declaration of an abstract crossbar base class. 492381SN/A */ 502381SN/A 5110405Sandreas.hansson@arm.com#ifndef __MEM_XBAR_HH__ 5210405Sandreas.hansson@arm.com#define __MEM_XBAR_HH__ 532381SN/A 549291SN/A#include <deque> 5511168Sandreas.hansson@arm.com#include <unordered_map> 562381SN/A 579235SN/A#include "base/addr_range_map.hh" 586215SN/A#include "base/types.hh" 592381SN/A#include "mem/mem_object.hh" 6010888Sandreas.hansson@arm.com#include "mem/qport.hh" 6110405Sandreas.hansson@arm.com#include "params/BaseXBar.hh" 629712SN/A#include "sim/stats.hh" 632381SN/A 649036SN/A/** 6510405Sandreas.hansson@arm.com * The base crossbar contains the common elements of the non-coherent 6610405Sandreas.hansson@arm.com * and coherent crossbar. It is an abstract class that does not have 6710405Sandreas.hansson@arm.com * any of the functionality relating to the actual reception and 6810405Sandreas.hansson@arm.com * transmission of packets, as this is left for the subclasses. 699036SN/A * 7010405Sandreas.hansson@arm.com * The BaseXBar is responsible for the basic flow control (busy or 719036SN/A * not), the administration of retries, and the address decoding. 729036SN/A */ 7310405Sandreas.hansson@arm.comclass BaseXBar : public MemObject 742381SN/A{ 759031SN/A 769036SN/A protected: 772381SN/A 789091SN/A /** 7910405Sandreas.hansson@arm.com * A layer is an internal crossbar arbitration point with its own 8010405Sandreas.hansson@arm.com * flow control. Each layer is a converging multiplexer tree. By 8110405Sandreas.hansson@arm.com * instantiating one layer per destination port (and per packet 8210405Sandreas.hansson@arm.com * type, i.e. request, response, snoop request and snoop 8310405Sandreas.hansson@arm.com * response), we model full crossbar structures like AXI, ACE, 8410405Sandreas.hansson@arm.com * PCIe, etc. 859093SN/A * 869093SN/A * The template parameter, PortClass, indicates the destination 8710405Sandreas.hansson@arm.com * port type for the layer. The retry list holds either master 8810405Sandreas.hansson@arm.com * ports or slave ports, depending on the direction of the 8910405Sandreas.hansson@arm.com * layer. Thus, a request layer has a retry list containing slave 9010405Sandreas.hansson@arm.com * ports, whereas a response layer holds master ports. 919091SN/A */ 929715SN/A template <typename SrcType, typename DstType> 939342SN/A class Layer : public Drainable 949092SN/A { 959091SN/A 969092SN/A public: 979092SN/A 989092SN/A /** 9910405Sandreas.hansson@arm.com * Create a layer and give it a name. The layer uses 10010405Sandreas.hansson@arm.com * the crossbar an event manager. 1019092SN/A * 1029715SN/A * @param _port destination port the layer converges at 10310405Sandreas.hansson@arm.com * @param _xbar the crossbar this layer belongs to 1049092SN/A * @param _name the layer's name 1059092SN/A */ 10610405Sandreas.hansson@arm.com Layer(DstType& _port, BaseXBar& _xbar, const std::string& _name); 1079092SN/A 1089092SN/A /** 10910405Sandreas.hansson@arm.com * Drain according to the normal semantics, so that the crossbar 1109092SN/A * can tell the layer to drain, and pass an event to signal 1119092SN/A * back when drained. 1129092SN/A * 1139092SN/A * @param de drain event to call once drained 1149092SN/A * 1159092SN/A * @return 1 if busy or waiting to retry, or 0 if idle 1169092SN/A */ 11711168Sandreas.hansson@arm.com DrainState drain() override; 1189092SN/A 1199092SN/A /** 12010405Sandreas.hansson@arm.com * Get the crossbar layer's name 1219092SN/A */ 12210405Sandreas.hansson@arm.com const std::string name() const { return xbar.name() + _name; } 1239092SN/A 1249092SN/A 1259092SN/A /** 12610405Sandreas.hansson@arm.com * Determine if the layer accepts a packet from a specific 1279092SN/A * port. If not, the port in question is also added to the 1289612SN/A * retry list. In either case the state of the layer is 1299714SN/A * updated accordingly. 1309092SN/A * 1319612SN/A * @param port Source port presenting the packet 1329092SN/A * 13310405Sandreas.hansson@arm.com * @return True if the layer accepts the packet 1349092SN/A */ 1359715SN/A bool tryTiming(SrcType* src_port); 1369092SN/A 1379092SN/A /** 1389092SN/A * Deal with a destination port accepting a packet by potentially 1399092SN/A * removing the source port from the retry list (if retrying) and 14010405Sandreas.hansson@arm.com * occupying the layer accordingly. 1419092SN/A * 1429092SN/A * @param busy_time Time to spend as a result of a successful send 1439092SN/A */ 1449092SN/A void succeededTiming(Tick busy_time); 1459092SN/A 1469092SN/A /** 1479092SN/A * Deal with a destination port not accepting a packet by 1489092SN/A * potentially adding the source port to the retry list (if 14910405Sandreas.hansson@arm.com * not already at the front) and occupying the layer 1509092SN/A * accordingly. 1519092SN/A * 1529612SN/A * @param src_port Source port 1539092SN/A * @param busy_time Time to spend as a result of a failed send 1549092SN/A */ 1559715SN/A void failedTiming(SrcType* src_port, Tick busy_time); 1569092SN/A 15710405Sandreas.hansson@arm.com /** Occupy the layer until until */ 1589092SN/A void occupyLayer(Tick until); 1599092SN/A 1609092SN/A /** 1619612SN/A * Send a retry to the port at the head of waitingForLayer. The 1629092SN/A * caller must ensure that the list is not empty. 1639092SN/A */ 1649092SN/A void retryWaiting(); 1659092SN/A 1669092SN/A /** 1679612SN/A * Handle a retry from a neighbouring module. This wraps 1689092SN/A * retryWaiting by verifying that there are ports waiting 1699092SN/A * before calling retryWaiting. 1709092SN/A */ 1719715SN/A void recvRetry(); 1729092SN/A 1739712SN/A /** 1749712SN/A * Register stats for the layer 1759712SN/A */ 1769712SN/A void regStats(); 1779712SN/A 17810713Sandreas.hansson@arm.com protected: 17910713Sandreas.hansson@arm.com 18010713Sandreas.hansson@arm.com /** 18110713Sandreas.hansson@arm.com * Sending the actual retry, in a manner specific to the 18210713Sandreas.hansson@arm.com * individual layers. Note that for a MasterPort, there is 18310713Sandreas.hansson@arm.com * both a RequestLayer and a SnoopResponseLayer using the same 18410713Sandreas.hansson@arm.com * port, but using different functions for the flow control. 18510713Sandreas.hansson@arm.com */ 18610713Sandreas.hansson@arm.com virtual void sendRetry(SrcType* retry_port) = 0; 18710713Sandreas.hansson@arm.com 1889092SN/A private: 1899092SN/A 1909715SN/A /** The destination port this layer converges at. */ 1919715SN/A DstType& port; 1929715SN/A 19310405Sandreas.hansson@arm.com /** The crossbar this layer is a part of. */ 19410405Sandreas.hansson@arm.com BaseXBar& xbar; 1959092SN/A 1969092SN/A /** A name for this layer. */ 1979092SN/A std::string _name; 1989092SN/A 1999092SN/A /** 20010405Sandreas.hansson@arm.com * We declare an enum to track the state of the layer. The 20110405Sandreas.hansson@arm.com * starting point is an idle state where the layer is waiting 20210405Sandreas.hansson@arm.com * for a packet to arrive. Upon arrival, the layer 2039092SN/A * transitions to the busy state, where it remains either 2049092SN/A * until the packet transfer is done, or the header time is 20510405Sandreas.hansson@arm.com * spent. Once the layer leaves the busy state, it can 2069092SN/A * either go back to idle, if no packets have arrived while it 20710405Sandreas.hansson@arm.com * was busy, or the layer goes on to retry the first port 2089612SN/A * in waitingForLayer. A similar transition takes place from 20910405Sandreas.hansson@arm.com * idle to retry if the layer receives a retry from one of 2109092SN/A * its connected ports. The retry state lasts until the port 2119092SN/A * in questions calls sendTiming and returns control to the 21210405Sandreas.hansson@arm.com * layer, or goes to a busy state if the port does not 2139092SN/A * immediately react to the retry by calling sendTiming. 2149092SN/A */ 2159092SN/A enum State { IDLE, BUSY, RETRY }; 2169092SN/A 21710405Sandreas.hansson@arm.com /** track the state of the layer */ 2189092SN/A State state; 2199092SN/A 2209092SN/A /** 2219612SN/A * A deque of ports that retry should be called on because 2229612SN/A * the original send was delayed due to a busy layer. 2239092SN/A */ 2249715SN/A std::deque<SrcType*> waitingForLayer; 2259092SN/A 2269092SN/A /** 2279715SN/A * Track who is waiting for the retry when receiving it from a 2289715SN/A * peer. If no port is waiting NULL is stored. 2299612SN/A */ 2309715SN/A SrcType* waitingForPeer; 2319612SN/A 2329612SN/A /** 23310405Sandreas.hansson@arm.com * Release the layer after being occupied and return to an 2349092SN/A * idle state where we proceed to send a retry to any 2359092SN/A * potential waiting port, or drain if asked to do so. 2369092SN/A */ 2379092SN/A void releaseLayer(); 2389092SN/A 2399092SN/A /** event used to schedule a release of the layer */ 2409092SN/A EventWrapper<Layer, &Layer::releaseLayer> releaseEvent; 2419092SN/A 2429712SN/A /** 2439712SN/A * Stats for occupancy and utilization. These stats capture 24410405Sandreas.hansson@arm.com * the time the layer spends in the busy state and are thus only 2459712SN/A * relevant when the memory system is in timing mode. 2469712SN/A */ 2479712SN/A Stats::Scalar occupancy; 2489712SN/A Stats::Formula utilization; 2499712SN/A 2509092SN/A }; 2519091SN/A 25210713Sandreas.hansson@arm.com class ReqLayer : public Layer<SlavePort,MasterPort> 25310713Sandreas.hansson@arm.com { 25410713Sandreas.hansson@arm.com public: 25510713Sandreas.hansson@arm.com /** 25610713Sandreas.hansson@arm.com * Create a request layer and give it a name. 25710713Sandreas.hansson@arm.com * 25810713Sandreas.hansson@arm.com * @param _port destination port the layer converges at 25910713Sandreas.hansson@arm.com * @param _xbar the crossbar this layer belongs to 26010713Sandreas.hansson@arm.com * @param _name the layer's name 26110713Sandreas.hansson@arm.com */ 26210713Sandreas.hansson@arm.com ReqLayer(MasterPort& _port, BaseXBar& _xbar, const std::string& _name) : 26310713Sandreas.hansson@arm.com Layer(_port, _xbar, _name) {} 26410713Sandreas.hansson@arm.com 26510713Sandreas.hansson@arm.com protected: 26610713Sandreas.hansson@arm.com 26710713Sandreas.hansson@arm.com void sendRetry(SlavePort* retry_port) 26810713Sandreas.hansson@arm.com { retry_port->sendRetryReq(); } 26910713Sandreas.hansson@arm.com }; 27010713Sandreas.hansson@arm.com 27110713Sandreas.hansson@arm.com class RespLayer : public Layer<MasterPort,SlavePort> 27210713Sandreas.hansson@arm.com { 27310713Sandreas.hansson@arm.com public: 27410713Sandreas.hansson@arm.com /** 27510713Sandreas.hansson@arm.com * Create a response layer and give it a name. 27610713Sandreas.hansson@arm.com * 27710713Sandreas.hansson@arm.com * @param _port destination port the layer converges at 27810713Sandreas.hansson@arm.com * @param _xbar the crossbar this layer belongs to 27910713Sandreas.hansson@arm.com * @param _name the layer's name 28010713Sandreas.hansson@arm.com */ 28110713Sandreas.hansson@arm.com RespLayer(SlavePort& _port, BaseXBar& _xbar, const std::string& _name) : 28210713Sandreas.hansson@arm.com Layer(_port, _xbar, _name) {} 28310713Sandreas.hansson@arm.com 28410713Sandreas.hansson@arm.com protected: 28510713Sandreas.hansson@arm.com 28610713Sandreas.hansson@arm.com void sendRetry(MasterPort* retry_port) 28710713Sandreas.hansson@arm.com { retry_port->sendRetryResp(); } 28810713Sandreas.hansson@arm.com }; 28910713Sandreas.hansson@arm.com 29010713Sandreas.hansson@arm.com class SnoopRespLayer : public Layer<SlavePort,MasterPort> 29110713Sandreas.hansson@arm.com { 29210713Sandreas.hansson@arm.com public: 29310713Sandreas.hansson@arm.com /** 29410713Sandreas.hansson@arm.com * Create a snoop response layer and give it a name. 29510713Sandreas.hansson@arm.com * 29610713Sandreas.hansson@arm.com * @param _port destination port the layer converges at 29710713Sandreas.hansson@arm.com * @param _xbar the crossbar this layer belongs to 29810713Sandreas.hansson@arm.com * @param _name the layer's name 29910713Sandreas.hansson@arm.com */ 30010713Sandreas.hansson@arm.com SnoopRespLayer(MasterPort& _port, BaseXBar& _xbar, 30110713Sandreas.hansson@arm.com const std::string& _name) : 30210713Sandreas.hansson@arm.com Layer(_port, _xbar, _name) {} 30310713Sandreas.hansson@arm.com 30410713Sandreas.hansson@arm.com protected: 30510713Sandreas.hansson@arm.com 30610713Sandreas.hansson@arm.com void sendRetry(SlavePort* retry_port) 30710713Sandreas.hansson@arm.com { retry_port->sendRetrySnoopResp(); } 30810713Sandreas.hansson@arm.com }; 30910713Sandreas.hansson@arm.com 31010719SMarco.Balboni@ARM.com /** 31110719SMarco.Balboni@ARM.com * Cycles of front-end pipeline including the delay to accept the request 31210719SMarco.Balboni@ARM.com * and to decode the address. 31310719SMarco.Balboni@ARM.com */ 31410719SMarco.Balboni@ARM.com const Cycles frontendLatency; 31510719SMarco.Balboni@ARM.com /** Cycles of forward latency */ 31610719SMarco.Balboni@ARM.com const Cycles forwardLatency; 31710719SMarco.Balboni@ARM.com /** Cycles of response latency */ 31810719SMarco.Balboni@ARM.com const Cycles responseLatency; 31910405Sandreas.hansson@arm.com /** the width of the xbar in bytes */ 3209240SN/A const uint32_t width; 3214475SN/A 3229235SN/A AddrRangeMap<PortID> portMap; 3234475SN/A 32410656Sandreas.hansson@arm.com /** 32510656Sandreas.hansson@arm.com * Remember where request packets came from so that we can route 32610656Sandreas.hansson@arm.com * responses to the appropriate port. This relies on the fact that 32710656Sandreas.hansson@arm.com * the underlying Request pointer inside the Packet stays 32810656Sandreas.hansson@arm.com * constant. 32910656Sandreas.hansson@arm.com */ 33011168Sandreas.hansson@arm.com std::unordered_map<RequestPtr, PortID> routeTo; 33110656Sandreas.hansson@arm.com 33210405Sandreas.hansson@arm.com /** all contigous ranges seen by this crossbar */ 33310405Sandreas.hansson@arm.com AddrRangeList xbarRanges; 3349564SN/A 3359279SN/A AddrRange defaultRange; 3364475SN/A 3378948SN/A /** 33810405Sandreas.hansson@arm.com * Function called by the port when the crossbar is recieving a 33910405Sandreas.hansson@arm.com * range change. 3409032SN/A * 3419032SN/A * @param master_port_id id of the port that received the change 3429032SN/A */ 34311186Serfan.azarkhish@unibo.it virtual void recvRangeChange(PortID master_port_id); 3444475SN/A 34510405Sandreas.hansson@arm.com /** Find which port connected to this crossbar (if any) should be 34610405Sandreas.hansson@arm.com * given a packet with this address. 34710405Sandreas.hansson@arm.com * 3484475SN/A * @param addr Address to find port for. 3494894SN/A * @return id of port that the packet should be sent out of. 3504475SN/A */ 3519031SN/A PortID findPort(Addr addr); 3524475SN/A 3534958SN/A // Cache for the findPort function storing recently used ports from portMap 3544958SN/A struct PortCache { 3554958SN/A bool valid; 3569031SN/A PortID id; 3579279SN/A AddrRange range; 3584958SN/A }; 3594958SN/A 3604958SN/A PortCache portCache[3]; 3614958SN/A 3624958SN/A // Checks the cache and returns the id of the port that has the requested 3634958SN/A // address within its range 3649279SN/A inline PortID checkPortCache(Addr addr) const { 3659405SN/A if (portCache[0].valid && portCache[0].range.contains(addr)) { 3664963SN/A return portCache[0].id; 3674963SN/A } 3689405SN/A if (portCache[1].valid && portCache[1].range.contains(addr)) { 3694963SN/A return portCache[1].id; 3704963SN/A } 3719405SN/A if (portCache[2].valid && portCache[2].range.contains(addr)) { 3724963SN/A return portCache[2].id; 3734958SN/A } 3744958SN/A 3759031SN/A return InvalidPortID; 3764958SN/A } 3774958SN/A 3784958SN/A // Clears the earliest entry of the cache and inserts a new port entry 3799279SN/A inline void updatePortCache(short id, const AddrRange& range) { 3804958SN/A portCache[2].valid = portCache[1].valid; 3814958SN/A portCache[2].id = portCache[1].id; 3829279SN/A portCache[2].range = portCache[1].range; 3834958SN/A 3844958SN/A portCache[1].valid = portCache[0].valid; 3854958SN/A portCache[1].id = portCache[0].id; 3869279SN/A portCache[1].range = portCache[0].range; 3874958SN/A 3884958SN/A portCache[0].valid = true; 3894958SN/A portCache[0].id = id; 3909279SN/A portCache[0].range = range; 3914958SN/A } 3924958SN/A 3934958SN/A // Clears the cache. Needs to be called in constructor. 3944958SN/A inline void clearPortCache() { 3954958SN/A portCache[2].valid = false; 3964958SN/A portCache[1].valid = false; 3974958SN/A portCache[0].valid = false; 3984958SN/A } 3994958SN/A 4008711SN/A /** 40110405Sandreas.hansson@arm.com * Return the address ranges the crossbar is responsible for. 4028711SN/A * 4038711SN/A * @return a list of non-overlapping address ranges 4044475SN/A */ 4059090SN/A AddrRangeList getAddrRanges() const; 4068711SN/A 4079547SN/A /** 4089547SN/A * Calculate the timing parameters for the packet. Updates the 40910694SMarco.Balboni@ARM.com * headerDelay and payloadDelay fields of the packet 4109547SN/A * object with the relative number of ticks required to transmit 41110694SMarco.Balboni@ARM.com * the header and the payload, respectively. 41210719SMarco.Balboni@ARM.com * 41310719SMarco.Balboni@ARM.com * @param pkt Packet to populate with timings 41410719SMarco.Balboni@ARM.com * @param header_delay Header delay to be added 4155354SN/A */ 41610719SMarco.Balboni@ARM.com void calcPacketTiming(PacketPtr pkt, Tick header_delay); 4175354SN/A 4189032SN/A /** 41910405Sandreas.hansson@arm.com * Remember for each of the master ports of the crossbar if we got 42010405Sandreas.hansson@arm.com * an address range from the connected slave. For convenience, 42110405Sandreas.hansson@arm.com * also keep track of if we got ranges from all the slave modules 42210405Sandreas.hansson@arm.com * or not. 4239279SN/A */ 4249279SN/A std::vector<bool> gotAddrRanges; 4259279SN/A bool gotAllAddrRanges; 4263159SN/A 42710405Sandreas.hansson@arm.com /** The master and slave ports of the crossbar */ 42810888Sandreas.hansson@arm.com std::vector<QueuedSlavePort*> slavePorts; 4298966SN/A std::vector<MasterPort*> masterPorts; 4308966SN/A 4312846SN/A /** Port that handles requests that don't match any of the interfaces.*/ 4329031SN/A PortID defaultPortID; 4332846SN/A 4347523SN/A /** If true, use address range provided by default device. Any 4357523SN/A address not handled by another port and not in default device's 4367523SN/A range will cause a fatal error. If false, just send all 4377523SN/A addresses not handled by another port to default device. */ 4389240SN/A const bool useDefaultRange; 4393489SN/A 44010405Sandreas.hansson@arm.com BaseXBar(const BaseXBarParams *p); 4419036SN/A 44210405Sandreas.hansson@arm.com virtual ~BaseXBar(); 4439036SN/A 4449712SN/A /** 4459712SN/A * Stats for transaction distribution and data passing through the 44610405Sandreas.hansson@arm.com * crossbar. The transaction distribution is globally counting 4479712SN/A * different types of commands. The packet count and total packet 44810405Sandreas.hansson@arm.com * size are two-dimensional vectors that are indexed by the 4499712SN/A * slave port and master port id (thus the neighbouring master and 4509712SN/A * neighbouring slave), summing up both directions (request and 4519712SN/A * response). 4529712SN/A */ 4539712SN/A Stats::Vector transDist; 4549712SN/A Stats::Vector2d pktCount; 45510405Sandreas.hansson@arm.com Stats::Vector2d pktSize; 4569712SN/A 4572381SN/A public: 4582381SN/A 4599278SN/A virtual void init(); 4609278SN/A 46110405Sandreas.hansson@arm.com /** A function used to return the port associated with this object. */ 4629294SN/A BaseMasterPort& getMasterPort(const std::string& if_name, 4639294SN/A PortID idx = InvalidPortID); 4649294SN/A BaseSlavePort& getSlavePort(const std::string& if_name, 4659294SN/A PortID idx = InvalidPortID); 4662568SN/A 4679712SN/A virtual void regStats(); 4689712SN/A 4692381SN/A}; 4702381SN/A 47110405Sandreas.hansson@arm.com#endif //__MEM_XBAR_HH__ 472