simple_mem.cc revision 13854:45d90a16247b
1/* 2 * Copyright (c) 2010-2013, 2015 ARM Limited 3 * All rights reserved 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2001-2005 The Regents of The University of Michigan 15 * All rights reserved. 16 * 17 * Redistribution and use in source and binary forms, with or without 18 * modification, are permitted provided that the following conditions are 19 * met: redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer; 21 * redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution; 24 * neither the name of the copyright holders nor the names of its 25 * contributors may be used to endorse or promote products derived from 26 * this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 * 40 * Authors: Ron Dreslinski 41 * Ali Saidi 42 * Andreas Hansson 43 */ 44 45#include "mem/simple_mem.hh" 46 47#include "base/random.hh" 48#include "base/trace.hh" 49#include "debug/Drain.hh" 50 51SimpleMemory::SimpleMemory(const SimpleMemoryParams* p) : 52 AbstractMemory(p), 53 port(name() + ".port", *this), latency(p->latency), 54 latency_var(p->latency_var), bandwidth(p->bandwidth), isBusy(false), 55 retryReq(false), retryResp(false), 56 releaseEvent([this]{ release(); }, name()), 57 dequeueEvent([this]{ dequeue(); }, name()) 58{ 59} 60 61void 62SimpleMemory::init() 63{ 64 AbstractMemory::init(); 65 66 // allow unconnected memories as this is used in several ruby 67 // systems at the moment 68 if (port.isConnected()) { 69 port.sendRangeChange(); 70 } 71} 72 73Tick 74SimpleMemory::recvAtomic(PacketPtr pkt) 75{ 76 panic_if(pkt->cacheResponding(), "Should not see packets where cache " 77 "is responding"); 78 79 access(pkt); 80 return getLatency(); 81} 82 83Tick 84SimpleMemory::recvAtomicBackdoor(PacketPtr pkt, MemBackdoorPtr &_backdoor) 85{ 86 Tick latency = recvAtomic(pkt); 87 88 if (backdoor.ptr()) 89 _backdoor = &backdoor; 90 return latency; 91} 92 93void 94SimpleMemory::recvFunctional(PacketPtr pkt) 95{ 96 pkt->pushLabel(name()); 97 98 functionalAccess(pkt); 99 100 bool done = false; 101 auto p = packetQueue.begin(); 102 // potentially update the packets in our packet queue as well 103 while (!done && p != packetQueue.end()) { 104 done = pkt->trySatisfyFunctional(p->pkt); 105 ++p; 106 } 107 108 pkt->popLabel(); 109} 110 111bool 112SimpleMemory::recvTimingReq(PacketPtr pkt) 113{ 114 panic_if(pkt->cacheResponding(), "Should not see packets where cache " 115 "is responding"); 116 117 panic_if(!(pkt->isRead() || pkt->isWrite()), 118 "Should only see read and writes at memory controller, " 119 "saw %s to %#llx\n", pkt->cmdString(), pkt->getAddr()); 120 121 // we should not get a new request after committing to retry the 122 // current one, but unfortunately the CPU violates this rule, so 123 // simply ignore it for now 124 if (retryReq) 125 return false; 126 127 // if we are busy with a read or write, remember that we have to 128 // retry 129 if (isBusy) { 130 retryReq = true; 131 return false; 132 } 133 134 // technically the packet only reaches us after the header delay, 135 // and since this is a memory controller we also need to 136 // deserialise the payload before performing any write operation 137 Tick receive_delay = pkt->headerDelay + pkt->payloadDelay; 138 pkt->headerDelay = pkt->payloadDelay = 0; 139 140 // update the release time according to the bandwidth limit, and 141 // do so with respect to the time it takes to finish this request 142 // rather than long term as it is the short term data rate that is 143 // limited for any real memory 144 145 // calculate an appropriate tick to release to not exceed 146 // the bandwidth limit 147 Tick duration = pkt->getSize() * bandwidth; 148 149 // only consider ourselves busy if there is any need to wait 150 // to avoid extra events being scheduled for (infinitely) fast 151 // memories 152 if (duration != 0) { 153 schedule(releaseEvent, curTick() + duration); 154 isBusy = true; 155 } 156 157 // go ahead and deal with the packet and put the response in the 158 // queue if there is one 159 bool needsResponse = pkt->needsResponse(); 160 recvAtomic(pkt); 161 // turn packet around to go back to requester if response expected 162 if (needsResponse) { 163 // recvAtomic() should already have turned packet into 164 // atomic response 165 assert(pkt->isResponse()); 166 167 Tick when_to_send = curTick() + receive_delay + getLatency(); 168 169 // typically this should be added at the end, so start the 170 // insertion sort with the last element, also make sure not to 171 // re-order in front of some existing packet with the same 172 // address, the latter is important as this memory effectively 173 // hands out exclusive copies (shared is not asserted) 174 auto i = packetQueue.end(); 175 --i; 176 while (i != packetQueue.begin() && when_to_send < i->tick && 177 i->pkt->getAddr() != pkt->getAddr()) 178 --i; 179 180 // emplace inserts the element before the position pointed to by 181 // the iterator, so advance it one step 182 packetQueue.emplace(++i, pkt, when_to_send); 183 184 if (!retryResp && !dequeueEvent.scheduled()) 185 schedule(dequeueEvent, packetQueue.back().tick); 186 } else { 187 pendingDelete.reset(pkt); 188 } 189 190 return true; 191} 192 193void 194SimpleMemory::release() 195{ 196 assert(isBusy); 197 isBusy = false; 198 if (retryReq) { 199 retryReq = false; 200 port.sendRetryReq(); 201 } 202} 203 204void 205SimpleMemory::dequeue() 206{ 207 assert(!packetQueue.empty()); 208 DeferredPacket deferred_pkt = packetQueue.front(); 209 210 retryResp = !port.sendTimingResp(deferred_pkt.pkt); 211 212 if (!retryResp) { 213 packetQueue.pop_front(); 214 215 // if the queue is not empty, schedule the next dequeue event, 216 // otherwise signal that we are drained if we were asked to do so 217 if (!packetQueue.empty()) { 218 // if there were packets that got in-between then we 219 // already have an event scheduled, so use re-schedule 220 reschedule(dequeueEvent, 221 std::max(packetQueue.front().tick, curTick()), true); 222 } else if (drainState() == DrainState::Draining) { 223 DPRINTF(Drain, "Draining of SimpleMemory complete\n"); 224 signalDrainDone(); 225 } 226 } 227} 228 229Tick 230SimpleMemory::getLatency() const 231{ 232 return latency + 233 (latency_var ? random_mt.random<Tick>(0, latency_var) : 0); 234} 235 236void 237SimpleMemory::recvRespRetry() 238{ 239 assert(retryResp); 240 241 dequeue(); 242} 243 244Port & 245SimpleMemory::getPort(const std::string &if_name, PortID idx) 246{ 247 if (if_name != "port") { 248 return MemObject::getPort(if_name, idx); 249 } else { 250 return port; 251 } 252} 253 254DrainState 255SimpleMemory::drain() 256{ 257 if (!packetQueue.empty()) { 258 DPRINTF(Drain, "SimpleMemory Queue has requests, waiting to drain\n"); 259 return DrainState::Draining; 260 } else { 261 return DrainState::Drained; 262 } 263} 264 265SimpleMemory::MemoryPort::MemoryPort(const std::string& _name, 266 SimpleMemory& _memory) 267 : SlavePort(_name, &_memory), memory(_memory) 268{ } 269 270AddrRangeList 271SimpleMemory::MemoryPort::getAddrRanges() const 272{ 273 AddrRangeList ranges; 274 ranges.push_back(memory.getAddrRange()); 275 return ranges; 276} 277 278Tick 279SimpleMemory::MemoryPort::recvAtomic(PacketPtr pkt) 280{ 281 return memory.recvAtomic(pkt); 282} 283 284Tick 285SimpleMemory::MemoryPort::recvAtomicBackdoor( 286 PacketPtr pkt, MemBackdoorPtr &_backdoor) 287{ 288 return memory.recvAtomicBackdoor(pkt, _backdoor); 289} 290 291void 292SimpleMemory::MemoryPort::recvFunctional(PacketPtr pkt) 293{ 294 memory.recvFunctional(pkt); 295} 296 297bool 298SimpleMemory::MemoryPort::recvTimingReq(PacketPtr pkt) 299{ 300 return memory.recvTimingReq(pkt); 301} 302 303void 304SimpleMemory::MemoryPort::recvRespRetry() 305{ 306 memory.recvRespRetry(); 307} 308 309SimpleMemory* 310SimpleMemoryParams::create() 311{ 312 return new SimpleMemory(this); 313} 314