simple_mem.cc revision 11192:4c28abcf8249
1/*
2 * Copyright (c) 2010-2013 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder.  You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2001-2005 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Ron Dreslinski
41 *          Ali Saidi
42 *          Andreas Hansson
43 */
44
45#include "base/random.hh"
46#include "mem/simple_mem.hh"
47#include "debug/Drain.hh"
48
49using namespace std;
50
51SimpleMemory::SimpleMemory(const SimpleMemoryParams* p) :
52    AbstractMemory(p),
53    port(name() + ".port", *this), latency(p->latency),
54    latency_var(p->latency_var), bandwidth(p->bandwidth), isBusy(false),
55    retryReq(false), retryResp(false),
56    releaseEvent(this), dequeueEvent(this)
57{
58}
59
60void
61SimpleMemory::init()
62{
63    AbstractMemory::init();
64
65    // allow unconnected memories as this is used in several ruby
66    // systems at the moment
67    if (port.isConnected()) {
68        port.sendRangeChange();
69    }
70}
71
72Tick
73SimpleMemory::recvAtomic(PacketPtr pkt)
74{
75    access(pkt);
76    return pkt->memInhibitAsserted() ? 0 : getLatency();
77}
78
79void
80SimpleMemory::recvFunctional(PacketPtr pkt)
81{
82    pkt->pushLabel(name());
83
84    functionalAccess(pkt);
85
86    bool done = false;
87    auto p = packetQueue.begin();
88    // potentially update the packets in our packet queue as well
89    while (!done && p != packetQueue.end()) {
90        done = pkt->checkFunctional(p->pkt);
91        ++p;
92    }
93
94    pkt->popLabel();
95}
96
97bool
98SimpleMemory::recvTimingReq(PacketPtr pkt)
99{
100    // sink inhibited packets without further action
101    if (pkt->memInhibitAsserted()) {
102        pendingDelete.reset(pkt);
103        return true;
104    }
105
106    // we should not get a new request after committing to retry the
107    // current one, but unfortunately the CPU violates this rule, so
108    // simply ignore it for now
109    if (retryReq)
110        return false;
111
112    // if we are busy with a read or write, remember that we have to
113    // retry
114    if (isBusy) {
115        retryReq = true;
116        return false;
117    }
118
119    // @todo someone should pay for this
120    pkt->headerDelay = pkt->payloadDelay = 0;
121
122    // update the release time according to the bandwidth limit, and
123    // do so with respect to the time it takes to finish this request
124    // rather than long term as it is the short term data rate that is
125    // limited for any real memory
126
127    // only look at reads and writes when determining if we are busy,
128    // and for how long, as it is not clear what to regulate for the
129    // other types of commands
130    if (pkt->isRead() || pkt->isWrite()) {
131        // calculate an appropriate tick to release to not exceed
132        // the bandwidth limit
133        Tick duration = pkt->getSize() * bandwidth;
134
135        // only consider ourselves busy if there is any need to wait
136        // to avoid extra events being scheduled for (infinitely) fast
137        // memories
138        if (duration != 0) {
139            schedule(releaseEvent, curTick() + duration);
140            isBusy = true;
141        }
142    }
143
144    // go ahead and deal with the packet and put the response in the
145    // queue if there is one
146    bool needsResponse = pkt->needsResponse();
147    recvAtomic(pkt);
148    // turn packet around to go back to requester if response expected
149    if (needsResponse) {
150        // recvAtomic() should already have turned packet into
151        // atomic response
152        assert(pkt->isResponse());
153        // to keep things simple (and in order), we put the packet at
154        // the end even if the latency suggests it should be sent
155        // before the packet(s) before it
156        packetQueue.emplace_back(pkt, curTick() + getLatency());
157        if (!retryResp && !dequeueEvent.scheduled())
158            schedule(dequeueEvent, packetQueue.back().tick);
159    } else {
160        pendingDelete.reset(pkt);
161    }
162
163    return true;
164}
165
166void
167SimpleMemory::release()
168{
169    assert(isBusy);
170    isBusy = false;
171    if (retryReq) {
172        retryReq = false;
173        port.sendRetryReq();
174    }
175}
176
177void
178SimpleMemory::dequeue()
179{
180    assert(!packetQueue.empty());
181    DeferredPacket deferred_pkt = packetQueue.front();
182
183    retryResp = !port.sendTimingResp(deferred_pkt.pkt);
184
185    if (!retryResp) {
186        packetQueue.pop_front();
187
188        // if the queue is not empty, schedule the next dequeue event,
189        // otherwise signal that we are drained if we were asked to do so
190        if (!packetQueue.empty()) {
191            // if there were packets that got in-between then we
192            // already have an event scheduled, so use re-schedule
193            reschedule(dequeueEvent,
194                       std::max(packetQueue.front().tick, curTick()), true);
195        } else if (drainState() == DrainState::Draining) {
196            DPRINTF(Drain, "Draining of SimpleMemory complete\n");
197            signalDrainDone();
198        }
199    }
200}
201
202Tick
203SimpleMemory::getLatency() const
204{
205    return latency +
206        (latency_var ? random_mt.random<Tick>(0, latency_var) : 0);
207}
208
209void
210SimpleMemory::recvRespRetry()
211{
212    assert(retryResp);
213
214    dequeue();
215}
216
217BaseSlavePort &
218SimpleMemory::getSlavePort(const std::string &if_name, PortID idx)
219{
220    if (if_name != "port") {
221        return MemObject::getSlavePort(if_name, idx);
222    } else {
223        return port;
224    }
225}
226
227DrainState
228SimpleMemory::drain()
229{
230    if (!packetQueue.empty()) {
231        DPRINTF(Drain, "SimpleMemory Queue has requests, waiting to drain\n");
232        return DrainState::Draining;
233    } else {
234        return DrainState::Drained;
235    }
236}
237
238SimpleMemory::MemoryPort::MemoryPort(const std::string& _name,
239                                     SimpleMemory& _memory)
240    : SlavePort(_name, &_memory), memory(_memory)
241{ }
242
243AddrRangeList
244SimpleMemory::MemoryPort::getAddrRanges() const
245{
246    AddrRangeList ranges;
247    ranges.push_back(memory.getAddrRange());
248    return ranges;
249}
250
251Tick
252SimpleMemory::MemoryPort::recvAtomic(PacketPtr pkt)
253{
254    return memory.recvAtomic(pkt);
255}
256
257void
258SimpleMemory::MemoryPort::recvFunctional(PacketPtr pkt)
259{
260    memory.recvFunctional(pkt);
261}
262
263bool
264SimpleMemory::MemoryPort::recvTimingReq(PacketPtr pkt)
265{
266    return memory.recvTimingReq(pkt);
267}
268
269void
270SimpleMemory::MemoryPort::recvRespRetry()
271{
272    memory.recvRespRetry();
273}
274
275SimpleMemory*
276SimpleMemoryParams::create()
277{
278    return new SimpleMemory(this);
279}
280