noncoherent_xbar.cc revision 12778:ca8c50112a66
1/*
2 * Copyright (c) 2011-2015 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder.  You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2006 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Ali Saidi
41 *          Andreas Hansson
42 *          William Wang
43 */
44
45/**
46 * @file
47 * Definition of a non-coherent crossbar object.
48 */
49
50#include "mem/noncoherent_xbar.hh"
51
52#include "base/logging.hh"
53#include "base/trace.hh"
54#include "debug/NoncoherentXBar.hh"
55#include "debug/XBar.hh"
56
57NoncoherentXBar::NoncoherentXBar(const NoncoherentXBarParams *p)
58    : BaseXBar(p)
59{
60    // create the ports based on the size of the master and slave
61    // vector ports, and the presence of the default port, the ports
62    // are enumerated starting from zero
63    for (int i = 0; i < p->port_master_connection_count; ++i) {
64        std::string portName = csprintf("%s.master[%d]", name(), i);
65        MasterPort* bp = new NoncoherentXBarMasterPort(portName, *this, i);
66        masterPorts.push_back(bp);
67        reqLayers.push_back(new ReqLayer(*bp, *this,
68                                         csprintf(".reqLayer%d", i)));
69    }
70
71    // see if we have a default slave device connected and if so add
72    // our corresponding master port
73    if (p->port_default_connection_count) {
74        defaultPortID = masterPorts.size();
75        std::string portName = name() + ".default";
76        MasterPort* bp = new NoncoherentXBarMasterPort(portName, *this,
77                                                      defaultPortID);
78        masterPorts.push_back(bp);
79        reqLayers.push_back(new ReqLayer(*bp, *this, csprintf(".reqLayer%d",
80                                                              defaultPortID)));
81    }
82
83    // create the slave ports, once again starting at zero
84    for (int i = 0; i < p->port_slave_connection_count; ++i) {
85        std::string portName = csprintf("%s.slave[%d]", name(), i);
86        QueuedSlavePort* bp = new NoncoherentXBarSlavePort(portName, *this, i);
87        slavePorts.push_back(bp);
88        respLayers.push_back(new RespLayer(*bp, *this,
89                                           csprintf(".respLayer%d", i)));
90    }
91}
92
93NoncoherentXBar::~NoncoherentXBar()
94{
95    for (auto l: reqLayers)
96        delete l;
97    for (auto l: respLayers)
98        delete l;
99}
100
101bool
102NoncoherentXBar::recvTimingReq(PacketPtr pkt, PortID slave_port_id)
103{
104    // determine the source port based on the id
105    SlavePort *src_port = slavePorts[slave_port_id];
106
107    // we should never see express snoops on a non-coherent crossbar
108    assert(!pkt->isExpressSnoop());
109
110    // determine the destination based on the address
111    PortID master_port_id = findPort(pkt->getAddr());
112
113    // test if the layer should be considered occupied for the current
114    // port
115    if (!reqLayers[master_port_id]->tryTiming(src_port)) {
116        DPRINTF(NoncoherentXBar, "recvTimingReq: src %s %s 0x%x BUSY\n",
117                src_port->name(), pkt->cmdString(), pkt->getAddr());
118        return false;
119    }
120
121    DPRINTF(NoncoherentXBar, "recvTimingReq: src %s %s 0x%x\n",
122            src_port->name(), pkt->cmdString(), pkt->getAddr());
123
124    // store size and command as they might be modified when
125    // forwarding the packet
126    unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
127    unsigned int pkt_cmd = pkt->cmdToIndex();
128
129    // store the old header delay so we can restore it if needed
130    Tick old_header_delay = pkt->headerDelay;
131
132    // a request sees the frontend and forward latency
133    Tick xbar_delay = (frontendLatency + forwardLatency) * clockPeriod();
134
135    // set the packet header and payload delay
136    calcPacketTiming(pkt, xbar_delay);
137
138    // determine how long to be crossbar layer is busy
139    Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay;
140
141    // before forwarding the packet (and possibly altering it),
142    // remember if we are expecting a response
143    const bool expect_response = pkt->needsResponse() &&
144        !pkt->cacheResponding();
145
146    // since it is a normal request, attempt to send the packet
147    bool success = masterPorts[master_port_id]->sendTimingReq(pkt);
148
149    if (!success)  {
150        DPRINTF(NoncoherentXBar, "recvTimingReq: src %s %s 0x%x RETRY\n",
151                src_port->name(), pkt->cmdString(), pkt->getAddr());
152
153        // restore the header delay as it is additive
154        pkt->headerDelay = old_header_delay;
155
156        // occupy until the header is sent
157        reqLayers[master_port_id]->failedTiming(src_port,
158                                                clockEdge(Cycles(1)));
159
160        return false;
161    }
162
163    // remember where to route the response to
164    if (expect_response) {
165        assert(routeTo.find(pkt->req) == routeTo.end());
166        routeTo[pkt->req] = slave_port_id;
167    }
168
169    reqLayers[master_port_id]->succeededTiming(packetFinishTime);
170
171    // stats updates
172    pktCount[slave_port_id][master_port_id]++;
173    pktSize[slave_port_id][master_port_id] += pkt_size;
174    transDist[pkt_cmd]++;
175
176    return true;
177}
178
179bool
180NoncoherentXBar::recvTimingResp(PacketPtr pkt, PortID master_port_id)
181{
182    // determine the source port based on the id
183    MasterPort *src_port = masterPorts[master_port_id];
184
185    // determine the destination
186    const auto route_lookup = routeTo.find(pkt->req);
187    assert(route_lookup != routeTo.end());
188    const PortID slave_port_id = route_lookup->second;
189    assert(slave_port_id != InvalidPortID);
190    assert(slave_port_id < respLayers.size());
191
192    // test if the layer should be considered occupied for the current
193    // port
194    if (!respLayers[slave_port_id]->tryTiming(src_port)) {
195        DPRINTF(NoncoherentXBar, "recvTimingResp: src %s %s 0x%x BUSY\n",
196                src_port->name(), pkt->cmdString(), pkt->getAddr());
197        return false;
198    }
199
200    DPRINTF(NoncoherentXBar, "recvTimingResp: src %s %s 0x%x\n",
201            src_port->name(), pkt->cmdString(), pkt->getAddr());
202
203    // store size and command as they might be modified when
204    // forwarding the packet
205    unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
206    unsigned int pkt_cmd = pkt->cmdToIndex();
207
208    // a response sees the response latency
209    Tick xbar_delay = responseLatency * clockPeriod();
210
211    // set the packet header and payload delay
212    calcPacketTiming(pkt, xbar_delay);
213
214    // determine how long to be crossbar layer is busy
215    Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay;
216
217    // send the packet through the destination slave port, and pay for
218    // any outstanding latency
219    Tick latency = pkt->headerDelay;
220    pkt->headerDelay = 0;
221    slavePorts[slave_port_id]->schedTimingResp(pkt, curTick() + latency);
222
223    // remove the request from the routing table
224    routeTo.erase(route_lookup);
225
226    respLayers[slave_port_id]->succeededTiming(packetFinishTime);
227
228    // stats updates
229    pktCount[slave_port_id][master_port_id]++;
230    pktSize[slave_port_id][master_port_id] += pkt_size;
231    transDist[pkt_cmd]++;
232
233    return true;
234}
235
236void
237NoncoherentXBar::recvReqRetry(PortID master_port_id)
238{
239    // responses never block on forwarding them, so the retry will
240    // always be coming from a port to which we tried to forward a
241    // request
242    reqLayers[master_port_id]->recvRetry();
243}
244
245Tick
246NoncoherentXBar::recvAtomic(PacketPtr pkt, PortID slave_port_id)
247{
248    DPRINTF(NoncoherentXBar, "recvAtomic: packet src %s addr 0x%x cmd %s\n",
249            slavePorts[slave_port_id]->name(), pkt->getAddr(),
250            pkt->cmdString());
251
252    unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0;
253    unsigned int pkt_cmd = pkt->cmdToIndex();
254
255    // determine the destination port
256    PortID master_port_id = findPort(pkt->getAddr());
257
258    // stats updates for the request
259    pktCount[slave_port_id][master_port_id]++;
260    pktSize[slave_port_id][master_port_id] += pkt_size;
261    transDist[pkt_cmd]++;
262
263    // forward the request to the appropriate destination
264    Tick response_latency = masterPorts[master_port_id]->sendAtomic(pkt);
265
266    // add the response data
267    if (pkt->isResponse()) {
268        pkt_size = pkt->hasData() ? pkt->getSize() : 0;
269        pkt_cmd = pkt->cmdToIndex();
270
271        // stats updates
272        pktCount[slave_port_id][master_port_id]++;
273        pktSize[slave_port_id][master_port_id] += pkt_size;
274        transDist[pkt_cmd]++;
275    }
276
277    // @todo: Not setting first-word time
278    pkt->payloadDelay = response_latency;
279    return response_latency;
280}
281
282void
283NoncoherentXBar::recvFunctional(PacketPtr pkt, PortID slave_port_id)
284{
285    if (!pkt->isPrint()) {
286        // don't do DPRINTFs on PrintReq as it clutters up the output
287        DPRINTF(NoncoherentXBar,
288                "recvFunctional: packet src %s addr 0x%x cmd %s\n",
289                slavePorts[slave_port_id]->name(), pkt->getAddr(),
290                pkt->cmdString());
291    }
292
293    // since our slave ports are queued ports we need to check them as well
294    for (const auto& p : slavePorts) {
295        // if we find a response that has the data, then the
296        // downstream caches/memories may be out of date, so simply stop
297        // here
298        if (p->checkFunctional(pkt)) {
299            if (pkt->needsResponse())
300                pkt->makeResponse();
301            return;
302        }
303    }
304
305    // determine the destination port
306    PortID dest_id = findPort(pkt->getAddr());
307
308    // forward the request to the appropriate destination
309    masterPorts[dest_id]->sendFunctional(pkt);
310}
311
312NoncoherentXBar*
313NoncoherentXBarParams::create()
314{
315    return new NoncoherentXBar(this);
316}
317
318void
319NoncoherentXBar::regStats()
320{
321    // register the stats of the base class and our layers
322    BaseXBar::regStats();
323    for (auto l: reqLayers)
324        l->regStats();
325    for (auto l: respLayers)
326        l->regStats();
327}
328