xref: /gem5/src/mem/dram_ctrl.cc

/*
 * Copyright (c) 2010-2015 ARM Limited
 * All rights reserved
 *
 * The license below extends only to copyright in the software and shall
 * not be construed as granting a license to any other intellectual
 * property including but not limited to intellectual property relating
 * to a hardware implementation of the functionality of the software
 * licensed hereunder.  You may use the software subject to the license
 * terms below provided that you ensure that this notice is replicated
 * unmodified and in its entirety in all distributions of the software,
 * modified or unmodified, in source code or in binary form.
 *
 * Copyright (c) 2013 Amin Farmahini-Farahani
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Andreas Hansson
 *          Ani Udipi
 *          Neha Agarwal
 *          Omar Naji
 */

#include "base/bitfield.hh"
#include "base/trace.hh"
#include "debug/DRAM.hh"
#include "debug/DRAMPower.hh"
#include "debug/DRAMState.hh"
#include "debug/Drain.hh"
#include "mem/dram_ctrl.hh"
#include "sim/system.hh"

using namespace std;
using namespace Data;

DRAMCtrl::DRAMCtrl(const DRAMCtrlParams* p) :
    AbstractMemory(p),
    port(name() + ".port", *this), isTimingMode(false),
    retryRdReq(false), retryWrReq(false),
    busState(READ),
    nextReqEvent(this), respondEvent(this),
    deviceSize(p->device_size),
    deviceBusWidth(p->device_bus_width), burstLength(p->burst_length),
    deviceRowBufferSize(p->device_rowbuffer_size),
    devicesPerRank(p->devices_per_rank),
    burstSize((devicesPerRank * burstLength * deviceBusWidth) / 8),
    rowBufferSize(devicesPerRank * deviceRowBufferSize),
    columnsPerRowBuffer(rowBufferSize / burstSize),
    columnsPerStripe(range.interleaved() ? range.granularity() / burstSize : 1),
    ranksPerChannel(p->ranks_per_channel),
    bankGroupsPerRank(p->bank_groups_per_rank),
    bankGroupArch(p->bank_groups_per_rank > 0),
    banksPerRank(p->banks_per_rank), channels(p->channels), rowsPerBank(0),
    readBufferSize(p->read_buffer_size),
    writeBufferSize(p->write_buffer_size),
    writeHighThreshold(writeBufferSize * p->write_high_thresh_perc / 100.0),
    writeLowThreshold(writeBufferSize * p->write_low_thresh_perc / 100.0),
    minWritesPerSwitch(p->min_writes_per_switch),
    writesThisTime(0), readsThisTime(0),
    tCK(p->tCK), tWTR(p->tWTR), tRTW(p->tRTW), tCS(p->tCS), tBURST(p->tBURST),
    tCCD_L(p->tCCD_L), tRCD(p->tRCD), tCL(p->tCL), tRP(p->tRP), tRAS(p->tRAS),
    tWR(p->tWR), tRTP(p->tRTP), tRFC(p->tRFC), tREFI(p->tREFI), tRRD(p->tRRD),
    tRRD_L(p->tRRD_L), tXAW(p->tXAW), activationLimit(p->activation_limit),
    memSchedPolicy(p->mem_sched_policy), addrMapping(p->addr_mapping),
    pageMgmt(p->page_policy),
    maxAccessesPerRow(p->max_accesses_per_row),
    frontendLatency(p->static_frontend_latency),
    backendLatency(p->static_backend_latency),
    busBusyUntil(0), prevArrival(0),
    nextReqTime(0), activeRank(0), timeStampOffset(0)
{
    // sanity check the ranks since we rely on bit slicing for the
    // address decoding
    fatal_if(!isPowerOf2(ranksPerChannel), "DRAM rank count of %d is not "
             "allowed, must be a power of two\n", ranksPerChannel);

    fatal_if(!isPowerOf2(burstSize), "DRAM burst size %d is not allowed, "
             "must be a power of two\n", burstSize);

    for (int i = 0; i < ranksPerChannel; i++) {
        Rank* rank = new Rank(*this, p);
        ranks.push_back(rank);

        rank->actTicks.resize(activationLimit, 0);
        rank->banks.resize(banksPerRank);
        rank->rank = i;

        for (int b = 0; b < banksPerRank; b++) {
            rank->banks[b].bank = b;
            // GDDR addressing of banks to BG is linear.
            // Here we assume that all DRAM generations address bank groups as
            // follows:
            if (bankGroupArch) {
                // Simply assign lower bits to bank group in order to
                // rotate across bank groups as banks are incremented
                // e.g. with 4 banks per bank group and 16 banks total:
                //    banks 0,4,8,12  are in bank group 0
                //    banks 1,5,9,13  are in bank group 1
                //    banks 2,6,10,14 are in bank group 2
                //    banks 3,7,11,15 are in bank group 3
                rank->banks[b].bankgr = b % bankGroupsPerRank;
            } else {
                // No bank groups; simply assign to bank number
                rank->banks[b].bankgr = b;
            }
        }
    }

    // perform a basic check of the write thresholds
    if (p->write_low_thresh_perc >= p->write_high_thresh_perc)
        fatal("Write buffer low threshold %d must be smaller than the "
              "high threshold %d\n", p->write_low_thresh_perc,
              p->write_high_thresh_perc);

    // determine the rows per bank by looking at the total capacity
    uint64_t capacity = ULL(1) << ceilLog2(AbstractMemory::size());

    // determine the dram actual capacity from the DRAM config in Mbytes
    uint64_t deviceCapacity = deviceSize / (1024 * 1024) * devicesPerRank *
        ranksPerChannel;

    // if actual DRAM size does not match memory capacity in system warn!
    if (deviceCapacity != capacity / (1024 * 1024))
        warn("DRAM device capacity (%d Mbytes) does not match the "
             "address range assigned (%d Mbytes)\n", deviceCapacity,
             capacity / (1024 * 1024));

    DPRINTF(DRAM, "Memory capacity %lld (%lld) bytes\n", capacity,
            AbstractMemory::size());

    DPRINTF(DRAM, "Row buffer size %d bytes with %d columns per row buffer\n",
            rowBufferSize, columnsPerRowBuffer);

    rowsPerBank = capacity / (rowBufferSize * banksPerRank * ranksPerChannel);

    // some basic sanity checks
    if (tREFI <= tRP || tREFI <= tRFC) {
        fatal("tREFI (%d) must be larger than tRP (%d) and tRFC (%d)\n",
              tREFI, tRP, tRFC);
    }

    // basic bank group architecture checks ->
    if (bankGroupArch) {
        // must have at least one bank per bank group
        if (bankGroupsPerRank > banksPerRank) {
            fatal("banks per rank (%d) must be equal to or larger than "
                  "banks groups per rank (%d)\n",
                  banksPerRank, bankGroupsPerRank);
        }
        // must have same number of banks in each bank group
        if ((banksPerRank % bankGroupsPerRank) != 0) {
            fatal("Banks per rank (%d) must be evenly divisible by bank groups "
                  "per rank (%d) for equal banks per bank group\n",
                  banksPerRank, bankGroupsPerRank);
        }
        // tCCD_L should be greater than minimal, back-to-back burst delay
        if (tCCD_L <= tBURST) {
            fatal("tCCD_L (%d) should be larger than tBURST (%d) when "
                  "bank groups per rank (%d) is greater than 1\n",
                  tCCD_L, tBURST, bankGroupsPerRank);
        }
        // tRRD_L is greater than minimal, same bank group ACT-to-ACT delay
        // some datasheets might specify it equal to tRRD
        if (tRRD_L < tRRD) {
            fatal("tRRD_L (%d) should be larger than tRRD (%d) when "
                  "bank groups per rank (%d) is greater than 1\n",
                  tRRD_L, tRRD, bankGroupsPerRank);
        }
    }

}

void
DRAMCtrl::init()
{
    AbstractMemory::init();

   if (!port.isConnected()) {
        fatal("DRAMCtrl %s is unconnected!\n", name());
    } else {
        port.sendRangeChange();
    }

    // a bit of sanity checks on the interleaving, save it for here to
    // ensure that the system pointer is initialised
    if (range.interleaved()) {
        if (channels != range.stripes())
            fatal("%s has %d interleaved address stripes but %d channel(s)\n",
                  name(), range.stripes(), channels);

        if (addrMapping == Enums::RoRaBaChCo) {
            if (rowBufferSize != range.granularity()) {
                fatal("Channel interleaving of %s doesn't match RoRaBaChCo "
                      "address map\n", name());
            }
        } else if (addrMapping == Enums::RoRaBaCoCh ||
                   addrMapping == Enums::RoCoRaBaCh) {
            // for the interleavings with channel bits in the bottom,
            // if the system uses a channel striping granularity that
            // is larger than the DRAM burst size, then map the
            // sequential accesses within a stripe to a number of
            // columns in the DRAM, effectively placing some of the
            // lower-order column bits as the least-significant bits
            // of the address (above the ones denoting the burst size)
            assert(columnsPerStripe >= 1);

            // channel striping has to be done at a granularity that
            // is equal or larger to a cache line
            if (system()->cacheLineSize() > range.granularity()) {
                fatal("Channel interleaving of %s must be at least as large "
                      "as the cache line size\n", name());
            }

            // ...and equal or smaller than the row-buffer size
            if (rowBufferSize < range.granularity()) {
                fatal("Channel interleaving of %s must be at most as large "
                      "as the row-buffer size\n", name());
            }
            // this is essentially the check above, so just to be sure
            assert(columnsPerStripe <= columnsPerRowBuffer);
        }
    }
}

void
DRAMCtrl::startup()
{
    // remember the memory system mode of operation
    isTimingMode = system()->isTimingMode();

    if (isTimingMode) {
        // timestamp offset should be in clock cycles for DRAMPower
        timeStampOffset = divCeil(curTick(), tCK);

        // update the start tick for the precharge accounting to the
        // current tick
        for (auto r : ranks) {
            r->startup(curTick() + tREFI - tRP);
        }

        // shift the bus busy time sufficiently far ahead that we never
        // have to worry about negative values when computing the time for
        // the next request, this will add an insignificant bubble at the
        // start of simulation
        busBusyUntil = curTick() + tRP + tRCD + tCL;
    }
}

Tick
DRAMCtrl::recvAtomic(PacketPtr pkt)
{
    DPRINTF(DRAM, "recvAtomic: %s 0x%x\n", pkt->cmdString(), pkt->getAddr());

    panic_if(pkt->cacheResponding(), "Should not see packets where cache "
             "is responding");

    // do the actual memory access and turn the packet into a response
    access(pkt);

    Tick latency = 0;
    if (pkt->hasData()) {
        // this value is not supposed to be accurate, just enough to
        // keep things going, mimic a closed page
        latency = tRP + tRCD + tCL;
    }
    return latency;
}

bool
DRAMCtrl::readQueueFull(unsigned int neededEntries) const
{
    DPRINTF(DRAM, "Read queue limit %d, current size %d, entries needed %d\n",
            readBufferSize, readQueue.size() + respQueue.size(),
            neededEntries);

    return
        (readQueue.size() + respQueue.size() + neededEntries) > readBufferSize;
}

bool
DRAMCtrl::writeQueueFull(unsigned int neededEntries) const
{
    DPRINTF(DRAM, "Write queue limit %d, current size %d, entries needed %d\n",
            writeBufferSize, writeQueue.size(), neededEntries);
    return (writeQueue.size() + neededEntries) > writeBufferSize;
}

DRAMCtrl::DRAMPacket*
DRAMCtrl::decodeAddr(PacketPtr pkt, Addr dramPktAddr, unsigned size,
                       bool isRead)
{
    // decode the address based on the address mapping scheme, with
    // Ro, Ra, Co, Ba and Ch denoting row, rank, column, bank and
    // channel, respectively
    uint8_t rank;
    uint8_t bank;
    // use a 64-bit unsigned during the computations as the row is
    // always the top bits, and check before creating the DRAMPacket
    uint64_t row;

    // truncate the address to a DRAM burst, which makes it unique to
    // a specific column, row, bank, rank and channel
    Addr addr = dramPktAddr / burstSize;

    // we have removed the lowest order address bits that denote the
    // position within the column
    if (addrMapping == Enums::RoRaBaChCo) {
        // the lowest order bits denote the column to ensure that
        // sequential cache lines occupy the same row
        addr = addr / columnsPerRowBuffer;

        // take out the channel part of the address
        addr = addr / channels;

        // after the channel bits, get the bank bits to interleave
        // over the banks
        bank = addr % banksPerRank;
        addr = addr / banksPerRank;

        // after the bank, we get the rank bits which thus interleaves
        // over the ranks
        rank = addr % ranksPerChannel;
        addr = addr / ranksPerChannel;

        // lastly, get the row bits, no need to remove them from addr
        row = addr % rowsPerBank;
    } else if (addrMapping == Enums::RoRaBaCoCh) {
        // take out the lower-order column bits
        addr = addr / columnsPerStripe;

        // take out the channel part of the address
        addr = addr / channels;

        // next, the higher-order column bites
        addr = addr / (columnsPerRowBuffer / columnsPerStripe);

        // after the column bits, we get the bank bits to interleave
        // over the banks
        bank = addr % banksPerRank;
        addr = addr / banksPerRank;

        // after the bank, we get the rank bits which thus interleaves
        // over the ranks
        rank = addr % ranksPerChannel;
        addr = addr / ranksPerChannel;

        // lastly, get the row bits, no need to remove them from addr
        row = addr % rowsPerBank;
    } else if (addrMapping == Enums::RoCoRaBaCh) {
        // optimise for closed page mode and utilise maximum
        // parallelism of the DRAM (at the cost of power)

        // take out the lower-order column bits
        addr = addr / columnsPerStripe;

        // take out the channel part of the address, not that this has
        // to match with how accesses are interleaved between the
        // controllers in the address mapping
        addr = addr / channels;

        // start with the bank bits, as this provides the maximum
        // opportunity for parallelism between requests
        bank = addr % banksPerRank;
        addr = addr / banksPerRank;

        // next get the rank bits
        rank = addr % ranksPerChannel;
        addr = addr / ranksPerChannel;

        // next, the higher-order column bites
        addr = addr / (columnsPerRowBuffer / columnsPerStripe);

        // lastly, get the row bits, no need to remove them from addr
        row = addr % rowsPerBank;
    } else
        panic("Unknown address mapping policy chosen!");

    assert(rank < ranksPerChannel);
    assert(bank < banksPerRank);
    assert(row < rowsPerBank);
    assert(row < Bank::NO_ROW);

    DPRINTF(DRAM, "Address: %lld Rank %d Bank %d Row %d\n",
            dramPktAddr, rank, bank, row);

    // create the corresponding DRAM packet with the entry time and
    // ready time set to the current tick, the latter will be updated
    // later
    uint16_t bank_id = banksPerRank * rank + bank;
    return new DRAMPacket(pkt, isRead, rank, bank, row, bank_id, dramPktAddr,
                          size, ranks[rank]->banks[bank], *ranks[rank]);
}

void
DRAMCtrl::addToReadQueue(PacketPtr pkt, unsigned int pktCount)
{
    // only add to the read queue here. whenever the request is
    // eventually done, set the readyTime, and call schedule()
    assert(!pkt->isWrite());

    assert(pktCount != 0);

    // if the request size is larger than burst size, the pkt is split into
    // multiple DRAM packets
    // Note if the pkt starting address is not aligened to burst size, the
    // address of first DRAM packet is kept unaliged. Subsequent DRAM packets
    // are aligned to burst size boundaries. This is to ensure we accurately
    // check read packets against packets in write queue.
    Addr addr = pkt->getAddr();
    unsigned pktsServicedByWrQ = 0;
    BurstHelper* burst_helper = NULL;
    for (int cnt = 0; cnt < pktCount; ++cnt) {
        unsigned size = std::min((addr | (burstSize - 1)) + 1,
                        pkt->getAddr() + pkt->getSize()) - addr;
        readPktSize[ceilLog2(size)]++;
        readBursts++;

        // First check write buffer to see if the data is already at
        // the controller
        bool foundInWrQ = false;
        Addr burst_addr = burstAlign(addr);
        // if the burst address is not present then there is no need
        // looking any further
        if (isInWriteQueue.find(burst_addr) != isInWriteQueue.end()) {
            for (const auto& p : writeQueue) {
                // check if the read is subsumed in the write queue
                // packet we are looking at
                if (p->addr <= addr && (addr + size) <= (p->addr + p->size)) {
                    foundInWrQ = true;
                    servicedByWrQ++;
                    pktsServicedByWrQ++;
                    DPRINTF(DRAM, "Read to addr %lld with size %d serviced by "
                            "write queue\n", addr, size);
                    bytesReadWrQ += burstSize;
                    break;
                }
            }
        }

        // If not found in the write q, make a DRAM packet and
        // push it onto the read queue
        if (!foundInWrQ) {

            // Make the burst helper for split packets
            if (pktCount > 1 && burst_helper == NULL) {
                DPRINTF(DRAM, "Read to addr %lld translates to %d "
                        "dram requests\n", pkt->getAddr(), pktCount);
                burst_helper = new BurstHelper(pktCount);
            }

            DRAMPacket* dram_pkt = decodeAddr(pkt, addr, size, true);
            dram_pkt->burstHelper = burst_helper;

            assert(!readQueueFull(1));
            rdQLenPdf[readQueue.size() + respQueue.size()]++;

            DPRINTF(DRAM, "Adding to read queue\n");

            readQueue.push_back(dram_pkt);

            // Update stats
            avgRdQLen = readQueue.size() + respQueue.size();
        }

        // Starting address of next dram pkt (aligend to burstSize boundary)
        addr = (addr | (burstSize - 1)) + 1;
    }

    // If all packets are serviced by write queue, we send the repsonse back
    if (pktsServicedByWrQ == pktCount) {
        accessAndRespond(pkt, frontendLatency);
        return;
    }

    // Update how many split packets are serviced by write queue
    if (burst_helper != NULL)
        burst_helper->burstsServiced = pktsServicedByWrQ;

    // If we are not already scheduled to get a request out of the
    // queue, do so now
    if (!nextReqEvent.scheduled()) {
        DPRINTF(DRAM, "Request scheduled immediately\n");
        schedule(nextReqEvent, curTick());
    }
}

void
DRAMCtrl::addToWriteQueue(PacketPtr pkt, unsigned int pktCount)
{
    // only add to the write queue here. whenever the request is
    // eventually done, set the readyTime, and call schedule()
    assert(pkt->isWrite());

    // if the request size is larger than burst size, the pkt is split into
    // multiple DRAM packets
    Addr addr = pkt->getAddr();
    for (int cnt = 0; cnt < pktCount; ++cnt) {
        unsigned size = std::min((addr | (burstSize - 1)) + 1,
                        pkt->getAddr() + pkt->getSize()) - addr;
        writePktSize[ceilLog2(size)]++;
        writeBursts++;

        // see if we can merge with an existing item in the write
        // queue and keep track of whether we have merged or not
        bool merged = isInWriteQueue.find(burstAlign(addr)) !=
            isInWriteQueue.end();

        // if the item was not merged we need to create a new write
        // and enqueue it
        if (!merged) {
            DRAMPacket* dram_pkt = decodeAddr(pkt, addr, size, false);

            assert(writeQueue.size() < writeBufferSize);
            wrQLenPdf[writeQueue.size()]++;

            DPRINTF(DRAM, "Adding to write queue\n");

            writeQueue.push_back(dram_pkt);
            isInWriteQueue.insert(burstAlign(addr));
            assert(writeQueue.size() == isInWriteQueue.size());

            // Update stats
            avgWrQLen = writeQueue.size();
        } else {
            DPRINTF(DRAM, "Merging write burst with existing queue entry\n");

            // keep track of the fact that this burst effectively
            // disappeared as it was merged with an existing one
            mergedWrBursts++;
        }

        // Starting address of next dram pkt (aligend to burstSize boundary)
        addr = (addr | (burstSize - 1)) + 1;
    }

    // we do not wait for the writes to be send to the actual memory,
    // but instead take responsibility for the consistency here and
    // snoop the write queue for any upcoming reads
    // @todo, if a pkt size is larger than burst size, we might need a
    // different front end latency
    accessAndRespond(pkt, frontendLatency);

    // If we are not already scheduled to get a request out of the
    // queue, do so now
    if (!nextReqEvent.scheduled()) {
        DPRINTF(DRAM, "Request scheduled immediately\n");
        schedule(nextReqEvent, curTick());
    }
}

void
DRAMCtrl::printQs() const {
    DPRINTF(DRAM, "===READ QUEUE===\n\n");
    for (auto i = readQueue.begin() ;  i != readQueue.end() ; ++i) {
        DPRINTF(DRAM, "Read %lu\n", (*i)->addr);
    }
    DPRINTF(DRAM, "\n===RESP QUEUE===\n\n");
    for (auto i = respQueue.begin() ;  i != respQueue.end() ; ++i) {
        DPRINTF(DRAM, "Response %lu\n", (*i)->addr);
    }
    DPRINTF(DRAM, "\n===WRITE QUEUE===\n\n");
    for (auto i = writeQueue.begin() ;  i != writeQueue.end() ; ++i) {
        DPRINTF(DRAM, "Write %lu\n", (*i)->addr);
    }
}

bool
DRAMCtrl::recvTimingReq(PacketPtr pkt)
{
    // This is where we enter from the outside world
    DPRINTF(DRAM, "recvTimingReq: request %s addr %lld size %d\n",
            pkt->cmdString(), pkt->getAddr(), pkt->getSize());

    panic_if(pkt->cacheResponding(), "Should not see packets where cache "
             "is responding");

    panic_if(!(pkt->isRead() || pkt->isWrite()),
             "Should only see read and writes at memory controller\n");

    // Calc avg gap between requests
    if (prevArrival != 0) {
        totGap += curTick() - prevArrival;
    }
    prevArrival = curTick();


    // Find out how many dram packets a pkt translates to
    // If the burst size is equal or larger than the pkt size, then a pkt
    // translates to only one dram packet. Otherwise, a pkt translates to
    // multiple dram packets
    unsigned size = pkt->getSize();
    unsigned offset = pkt->getAddr() & (burstSize - 1);
    unsigned int dram_pkt_count = divCeil(offset + size, burstSize);

    // check local buffers and do not accept if full
    if (pkt->isRead()) {
        assert(size != 0);
        if (readQueueFull(dram_pkt_count)) {
            DPRINTF(DRAM, "Read queue full, not accepting\n");
            // remember that we have to retry this port
            retryRdReq = true;
            numRdRetry++;
            return false;
        } else {
            addToReadQueue(pkt, dram_pkt_count);
            readReqs++;
            bytesReadSys += size;
        }
    } else {
        assert(pkt->isWrite());
        assert(size != 0);
        if (writeQueueFull(dram_pkt_count)) {
            DPRINTF(DRAM, "Write queue full, not accepting\n");
            // remember that we have to retry this port
            retryWrReq = true;
            numWrRetry++;
            return false;
        } else {
            addToWriteQueue(pkt, dram_pkt_count);
            writeReqs++;
            bytesWrittenSys += size;
        }
    }

    return true;
}

void
DRAMCtrl::processRespondEvent()
{
    DPRINTF(DRAM,
            "processRespondEvent(): Some req has reached its readyTime\n");

    DRAMPacket* dram_pkt = respQueue.front();

    if (dram_pkt->burstHelper) {
        // it is a split packet
        dram_pkt->burstHelper->burstsServiced++;
        if (dram_pkt->burstHelper->burstsServiced ==
            dram_pkt->burstHelper->burstCount) {
            // we have now serviced all children packets of a system packet
            // so we can now respond to the requester
            // @todo we probably want to have a different front end and back
            // end latency for split packets
            accessAndRespond(dram_pkt->pkt, frontendLatency + backendLatency);
            delete dram_pkt->burstHelper;
            dram_pkt->burstHelper = NULL;
        }
    } else {
        // it is not a split packet
        accessAndRespond(dram_pkt->pkt, frontendLatency + backendLatency);
    }

    delete respQueue.front();
    respQueue.pop_front();

    if (!respQueue.empty()) {
        assert(respQueue.front()->readyTime >= curTick());
        assert(!respondEvent.scheduled());
        schedule(respondEvent, respQueue.front()->readyTime);
    } else {
        // if there is nothing left in any queue, signal a drain
        if (drainState() == DrainState::Draining &&
            writeQueue.empty() && readQueue.empty()) {

            DPRINTF(Drain, "DRAM controller done draining\n");
            signalDrainDone();
        }
    }

    // We have made a location in the queue available at this point,
    // so if there is a read that was forced to wait, retry now
    if (retryRdReq) {
        retryRdReq = false;
        port.sendRetryReq();
    }
}

bool
DRAMCtrl::chooseNext(std::deque<DRAMPacket*>& queue, Tick extra_col_delay)
{
    // This method does the arbitration between requests. The chosen
    // packet is simply moved to the head of the queue. The other
    // methods know that this is the place to look. For example, with
    // FCFS, this method does nothing
    assert(!queue.empty());

    // bool to indicate if a packet to an available rank is found
    bool found_packet = false;
    if (queue.size() == 1) {
        DRAMPacket* dram_pkt = queue.front();
        // available rank corresponds to state refresh idle
        if (ranks[dram_pkt->rank]->isAvailable()) {
            found_packet = true;
            DPRINTF(DRAM, "Single request, going to a free rank\n");
        } else {
            DPRINTF(DRAM, "Single request, going to a busy rank\n");
        }
        return found_packet;
    }

    if (memSchedPolicy == Enums::fcfs) {
        // check if there is a packet going to a free rank
        for (auto i = queue.begin(); i != queue.end() ; ++i) {
            DRAMPacket* dram_pkt = *i;
            if (ranks[dram_pkt->rank]->isAvailable()) {
                queue.erase(i);
                queue.push_front(dram_pkt);
                found_packet = true;
                break;
            }
        }
    } else if (memSchedPolicy == Enums::frfcfs) {
        found_packet = reorderQueue(queue, extra_col_delay);
    } else
        panic("No scheduling policy chosen\n");
    return found_packet;
}

bool
DRAMCtrl::reorderQueue(std::deque<DRAMPacket*>& queue, Tick extra_col_delay)
{
    // Only determine this if needed
    uint64_t earliest_banks = 0;
    bool hidden_bank_prep = false;

    // search for seamless row hits first, if no seamless row hit is
    // found then determine if there are other packets that can be issued
    // without incurring additional bus delay due to bank timing
    // Will select closed rows first to enable more open row possibilies
    // in future selections
    bool found_hidden_bank = false;

    // remember if we found a row hit, not seamless, but bank prepped
    // and ready
    bool found_prepped_pkt = false;

    // if we have no row hit, prepped or not, and no seamless packet,
    // just go for the earliest possible
    bool found_earliest_pkt = false;

    auto selected_pkt_it = queue.end();

    // time we need to issue a column command to be seamless
    const Tick min_col_at = std::max(busBusyUntil - tCL + extra_col_delay,
                                     curTick());

    for (auto i = queue.begin(); i != queue.end() ; ++i) {
        DRAMPacket* dram_pkt = *i;
        const Bank& bank = dram_pkt->bankRef;

        // check if rank is available, if not, jump to the next packet
        if (dram_pkt->rankRef.isAvailable()) {
            // check if it is a row hit
            if (bank.openRow == dram_pkt->row) {
                // no additional rank-to-rank or same bank-group
                // delays, or we switched read/write and might as well
                // go for the row hit
                if (bank.colAllowedAt <= min_col_at) {
                    // FCFS within the hits, giving priority to
                    // commands that can issue seamlessly, without
                    // additional delay, such as same rank accesses
                    // and/or different bank-group accesses
                    DPRINTF(DRAM, "Seamless row buffer hit\n");
                    selected_pkt_it = i;
                    // no need to look through the remaining queue entries
                    break;
                } else if (!found_hidden_bank && !found_prepped_pkt) {
                    // if we did not find a packet to a closed row that can
                    // issue the bank commands without incurring delay, and
                    // did not yet find a packet to a prepped row, remember
                    // the current one
                    selected_pkt_it = i;
                    found_prepped_pkt = true;
                    DPRINTF(DRAM, "Prepped row buffer hit\n");
                }
            } else if (!found_earliest_pkt) {
                // if we have not initialised the bank status, do it
                // now, and only once per scheduling decisions
                if (earliest_banks == 0) {
                    // determine entries with earliest bank delay
                    pair<uint64_t, bool> bankStatus =
                        minBankPrep(queue, min_col_at);
                    earliest_banks = bankStatus.first;
                    hidden_bank_prep = bankStatus.second;
                }

                // bank is amongst first available banks
                // minBankPrep will give priority to packets that can
                // issue seamlessly
                if (bits(earliest_banks, dram_pkt->bankId, dram_pkt->bankId)) {
                    found_earliest_pkt = true;
                    found_hidden_bank = hidden_bank_prep;

                    // give priority to packets that can issue
                    // bank commands 'behind the scenes'
                    // any additional delay if any will be due to
                    // col-to-col command requirements
                    if (hidden_bank_prep || !found_prepped_pkt)
                        selected_pkt_it = i;
                }
            }
        }
    }

    if (selected_pkt_it != queue.end()) {
        DRAMPacket* selected_pkt = *selected_pkt_it;
        queue.erase(selected_pkt_it);
        queue.push_front(selected_pkt);
        return true;
    }

    return false;
}

void
DRAMCtrl::accessAndRespond(PacketPtr pkt, Tick static_latency)
{
    DPRINTF(DRAM, "Responding to Address %lld.. ",pkt->getAddr());

    bool needsResponse = pkt->needsResponse();
    // do the actual memory access which also turns the packet into a
    // response
    access(pkt);

    // turn packet around to go back to requester if response expected
    if (needsResponse) {
        // access already turned the packet into a response
        assert(pkt->isResponse());
        // response_time consumes the static latency and is charged also
        // with headerDelay that takes into account the delay provided by
        // the xbar and also the payloadDelay that takes into account the
        // number of data beats.
        Tick response_time = curTick() + static_latency + pkt->headerDelay +
                             pkt->payloadDelay;
        // Here we reset the timing of the packet before sending it out.
        pkt->headerDelay = pkt->payloadDelay = 0;

        // queue the packet in the response queue to be sent out after
        // the static latency has passed
        port.schedTimingResp(pkt, response_time, true);
    } else {
        // @todo the packet is going to be deleted, and the DRAMPacket
        // is still having a pointer to it
        pendingDelete.reset(pkt);
    }

    DPRINTF(DRAM, "Done\n");

    return;
}

void
DRAMCtrl::activateBank(Rank& rank_ref, Bank& bank_ref,
                       Tick act_tick, uint32_t row)
{
    assert(rank_ref.actTicks.size() == activationLimit);

    DPRINTF(DRAM, "Activate at tick %d\n", act_tick);

    // update the open row
    assert(bank_ref.openRow == Bank::NO_ROW);
    bank_ref.openRow = row;

    // start counting anew, this covers both the case when we
    // auto-precharged, and when this access is forced to
    // precharge
    bank_ref.bytesAccessed = 0;
    bank_ref.rowAccesses = 0;

    ++rank_ref.numBanksActive;
    assert(rank_ref.numBanksActive <= banksPerRank);

    DPRINTF(DRAM, "Activate bank %d, rank %d at tick %lld, now got %d active\n",
            bank_ref.bank, rank_ref.rank, act_tick,
            ranks[rank_ref.rank]->numBanksActive);

    rank_ref.power.powerlib.doCommand(MemCommand::ACT, bank_ref.bank,
                                      divCeil(act_tick, tCK) -
                                      timeStampOffset);

    DPRINTF(DRAMPower, "%llu,ACT,%d,%d\n", divCeil(act_tick, tCK) -
            timeStampOffset, bank_ref.bank, rank_ref.rank);

    // The next access has to respect tRAS for this bank
    bank_ref.preAllowedAt = act_tick + tRAS;

    // Respect the row-to-column command delay
    bank_ref.colAllowedAt = std::max(act_tick + tRCD, bank_ref.colAllowedAt);

    // start by enforcing tRRD
    for (int i = 0; i < banksPerRank; i++) {
        // next activate to any bank in this rank must not happen
        // before tRRD
        if (bankGroupArch && (bank_ref.bankgr == rank_ref.banks[i].bankgr)) {
            // bank group architecture requires longer delays between
            // ACT commands within the same bank group.  Use tRRD_L
            // in this case
            rank_ref.banks[i].actAllowedAt = std::max(act_tick + tRRD_L,
                                             rank_ref.banks[i].actAllowedAt);
        } else {
            // use shorter tRRD value when either
            // 1) bank group architecture is not supportted
            // 2) bank is in a different bank group
            rank_ref.banks[i].actAllowedAt = std::max(act_tick + tRRD,
                                             rank_ref.banks[i].actAllowedAt);
        }
    }

    // next, we deal with tXAW, if the activation limit is disabled
    // then we directly schedule an activate power event
    if (!rank_ref.actTicks.empty()) {
        // sanity check
        if (rank_ref.actTicks.back() &&
           (act_tick - rank_ref.actTicks.back()) < tXAW) {
            panic("Got %d activates in window %d (%llu - %llu) which "
                  "is smaller than %llu\n", activationLimit, act_tick -
                  rank_ref.actTicks.back(), act_tick,
                  rank_ref.actTicks.back(), tXAW);
        }

        // shift the times used for the book keeping, the last element
        // (highest index) is the oldest one and hence the lowest value
        rank_ref.actTicks.pop_back();

        // record an new activation (in the future)
        rank_ref.actTicks.push_front(act_tick);

        // cannot activate more than X times in time window tXAW, push the
        // next one (the X + 1'st activate) to be tXAW away from the
        // oldest in our window of X
        if (rank_ref.actTicks.back() &&
           (act_tick - rank_ref.actTicks.back()) < tXAW) {
            DPRINTF(DRAM, "Enforcing tXAW with X = %d, next activate "
                    "no earlier than %llu\n", activationLimit,
                    rank_ref.actTicks.back() + tXAW);
            for (int j = 0; j < banksPerRank; j++)
                // next activate must not happen before end of window
                rank_ref.banks[j].actAllowedAt =
                    std::max(rank_ref.actTicks.back() + tXAW,
                             rank_ref.banks[j].actAllowedAt);
        }
    }

    // at the point when this activate takes place, make sure we
    // transition to the active power state
    if (!rank_ref.activateEvent.scheduled())
        schedule(rank_ref.activateEvent, act_tick);
    else if (rank_ref.activateEvent.when() > act_tick)
        // move it sooner in time
        reschedule(rank_ref.activateEvent, act_tick);
}

void
DRAMCtrl::prechargeBank(Rank& rank_ref, Bank& bank, Tick pre_at, bool trace)
{
    // make sure the bank has an open row
    assert(bank.openRow != Bank::NO_ROW);

    // sample the bytes per activate here since we are closing
    // the page
    bytesPerActivate.sample(bank.bytesAccessed);

    bank.openRow = Bank::NO_ROW;

    // no precharge allowed before this one
    bank.preAllowedAt = pre_at;

    Tick pre_done_at = pre_at + tRP;

    bank.actAllowedAt = std::max(bank.actAllowedAt, pre_done_at);

    assert(rank_ref.numBanksActive != 0);
    --rank_ref.numBanksActive;

    DPRINTF(DRAM, "Precharging bank %d, rank %d at tick %lld, now got "
            "%d active\n", bank.bank, rank_ref.rank, pre_at,
            rank_ref.numBanksActive);

    if (trace) {

        rank_ref.power.powerlib.doCommand(MemCommand::PRE, bank.bank,
                                                divCeil(pre_at, tCK) -
                                                timeStampOffset);
        DPRINTF(DRAMPower, "%llu,PRE,%d,%d\n", divCeil(pre_at, tCK) -
                timeStampOffset, bank.bank, rank_ref.rank);
    }
    // if we look at the current number of active banks we might be
    // tempted to think the DRAM is now idle, however this can be
    // undone by an activate that is scheduled to happen before we
    // would have reached the idle state, so schedule an event and
    // rather check once we actually make it to the point in time when
    // the (last) precharge takes place
    if (!rank_ref.prechargeEvent.scheduled())
        schedule(rank_ref.prechargeEvent, pre_done_at);
    else if (rank_ref.prechargeEvent.when() < pre_done_at)
        reschedule(rank_ref.prechargeEvent, pre_done_at);
}

void
DRAMCtrl::doDRAMAccess(DRAMPacket* dram_pkt)
{
    DPRINTF(DRAM, "Timing access to addr %lld, rank/bank/row %d %d %d\n",
            dram_pkt->addr, dram_pkt->rank, dram_pkt->bank, dram_pkt->row);

    // get the rank
    Rank& rank = dram_pkt->rankRef;

    // get the bank
    Bank& bank = dram_pkt->bankRef;

    // for the state we need to track if it is a row hit or not
    bool row_hit = true;

    // respect any constraints on the command (e.g. tRCD or tCCD)
    Tick cmd_at = std::max(bank.colAllowedAt, curTick());

    // Determine the access latency and update the bank state
    if (bank.openRow == dram_pkt->row) {
        // nothing to do
    } else {
        row_hit = false;

        // If there is a page open, precharge it.
        if (bank.openRow != Bank::NO_ROW) {
            prechargeBank(rank, bank, std::max(bank.preAllowedAt, curTick()));
        }

        // next we need to account for the delay in activating the
        // page
        Tick act_tick = std::max(bank.actAllowedAt, curTick());

        // Record the activation and deal with all the global timing
        // constraints caused be a new activation (tRRD and tXAW)
        activateBank(rank, bank, act_tick, dram_pkt->row);

        // issue the command as early as possible
        cmd_at = bank.colAllowedAt;
    }

    // we need to wait until the bus is available before we can issue
    // the command
    cmd_at = std::max(cmd_at, busBusyUntil - tCL);

    // update the packet ready time
    dram_pkt->readyTime = cmd_at + tCL + tBURST;

    // only one burst can use the bus at any one point in time
    assert(dram_pkt->readyTime - busBusyUntil >= tBURST);

    // update the time for the next read/write burst for each
    // bank (add a max with tCCD/tCCD_L here)
    Tick cmd_dly;
    for (int j = 0; j < ranksPerChannel; j++) {
        for (int i = 0; i < banksPerRank; i++) {
            // next burst to same bank group in this rank must not happen
            // before tCCD_L.  Different bank group timing requirement is
            // tBURST; Add tCS for different ranks
            if (dram_pkt->rank == j) {
                if (bankGroupArch &&
                   (bank.bankgr == ranks[j]->banks[i].bankgr)) {
                    // bank group architecture requires longer delays between
                    // RD/WR burst commands to the same bank group.
                    // Use tCCD_L in this case
                    cmd_dly = tCCD_L;
                } else {
                    // use tBURST (equivalent to tCCD_S), the shorter
                    // cas-to-cas delay value, when either:
                    // 1) bank group architecture is not supportted
                    // 2) bank is in a different bank group
                    cmd_dly = tBURST;
                }
            } else {
                // different rank is by default in a different bank group
                // use tBURST (equivalent to tCCD_S), which is the shorter
                // cas-to-cas delay in this case
                // Add tCS to account for rank-to-rank bus delay requirements
                cmd_dly = tBURST + tCS;
            }
            ranks[j]->banks[i].colAllowedAt = std::max(cmd_at + cmd_dly,
                                             ranks[j]->banks[i].colAllowedAt);
        }
    }

    // Save rank of current access
    activeRank = dram_pkt->rank;

    // If this is a write, we also need to respect the write recovery
    // time before a precharge, in the case of a read, respect the
    // read to precharge constraint
    bank.preAllowedAt = std::max(bank.preAllowedAt,
                                 dram_pkt->isRead ? cmd_at + tRTP :
                                 dram_pkt->readyTime + tWR);

    // increment the bytes accessed and the accesses per row
    bank.bytesAccessed += burstSize;
    ++bank.rowAccesses;

    // if we reached the max, then issue with an auto-precharge
    bool auto_precharge = pageMgmt == Enums::close ||
        bank.rowAccesses == maxAccessesPerRow;

    // if we did not hit the limit, we might still want to
    // auto-precharge
    if (!auto_precharge &&
        (pageMgmt == Enums::open_adaptive ||
         pageMgmt == Enums::close_adaptive)) {
        // a twist on the open and close page policies:
        // 1) open_adaptive page policy does not blindly keep the
        // page open, but close it if there are no row hits, and there
        // are bank conflicts in the queue
        // 2) close_adaptive page policy does not blindly close the
        // page, but closes it only if there are no row hits in the queue.
        // In this case, only force an auto precharge when there
        // are no same page hits in the queue
        bool got_more_hits = false;
        bool got_bank_conflict = false;

        // either look at the read queue or write queue
        const deque<DRAMPacket*>& queue = dram_pkt->isRead ? readQueue :
            writeQueue;
        auto p = queue.begin();
        // make sure we are not considering the packet that we are
        // currently dealing with (which is the head of the queue)
        ++p;

        // keep on looking until we find a hit or reach the end of the queue
        // 1) if a hit is found, then both open and close adaptive policies keep
        // the page open
        // 2) if no hit is found, got_bank_conflict is set to true if a bank
        // conflict request is waiting in the queue
        while (!got_more_hits && p != queue.end()) {
            bool same_rank_bank = (dram_pkt->rank == (*p)->rank) &&
                (dram_pkt->bank == (*p)->bank);
            bool same_row = dram_pkt->row == (*p)->row;
            got_more_hits |= same_rank_bank && same_row;
            got_bank_conflict |= same_rank_bank && !same_row;
            ++p;
        }

        // auto pre-charge when either
        // 1) open_adaptive policy, we have not got any more hits, and
        //    have a bank conflict
        // 2) close_adaptive policy and we have not got any more hits
        auto_precharge = !got_more_hits &&
            (got_bank_conflict || pageMgmt == Enums::close_adaptive);
    }

    // DRAMPower trace command to be written
    std::string mem_cmd = dram_pkt->isRead ? "RD" : "WR";

    // MemCommand required for DRAMPower library
    MemCommand::cmds command = (mem_cmd == "RD") ? MemCommand::RD :
                                                   MemCommand::WR;

    // if this access should use auto-precharge, then we are
    // closing the row
    if (auto_precharge) {
        // if auto-precharge push a PRE command at the correct tick to the
        // list used by DRAMPower library to calculate power
        prechargeBank(rank, bank, std::max(curTick(), bank.preAllowedAt));

        DPRINTF(DRAM, "Auto-precharged bank: %d\n", dram_pkt->bankId);
    }

    // Update bus state
    busBusyUntil = dram_pkt->readyTime;

    DPRINTF(DRAM, "Access to %lld, ready at %lld bus busy until %lld.\n",
            dram_pkt->addr, dram_pkt->readyTime, busBusyUntil);

    dram_pkt->rankRef.power.powerlib.doCommand(command, dram_pkt->bank,
                                                 divCeil(cmd_at, tCK) -
                                                 timeStampOffset);

    DPRINTF(DRAMPower, "%llu,%s,%d,%d\n", divCeil(cmd_at, tCK) -
            timeStampOffset, mem_cmd, dram_pkt->bank, dram_pkt->rank);

    // Update the minimum timing between the requests, this is a
    // conservative estimate of when we have to schedule the next
    // request to not introduce any unecessary bubbles. In most cases
    // we will wake up sooner than we have to.
    nextReqTime = busBusyUntil - (tRP + tRCD + tCL);

    // Update the stats and schedule the next request
    if (dram_pkt->isRead) {
        ++readsThisTime;
        if (row_hit)
            readRowHits++;
        bytesReadDRAM += burstSize;
        perBankRdBursts[dram_pkt->bankId]++;

        // Update latency stats
        totMemAccLat += dram_pkt->readyTime - dram_pkt->entryTime;
        totBusLat += tBURST;
        totQLat += cmd_at - dram_pkt->entryTime;
    } else {
        ++writesThisTime;
        if (row_hit)
            writeRowHits++;
        bytesWritten += burstSize;
        perBankWrBursts[dram_pkt->bankId]++;
    }
}

void
DRAMCtrl::processNextReqEvent()
{
    int busyRanks = 0;
    for (auto r : ranks) {
        if (!r->isAvailable()) {
            // rank is busy refreshing
            busyRanks++;

            // let the rank know that if it was waiting to drain, it
            // is now done and ready to proceed
            r->checkDrainDone();
        }
    }

    if (busyRanks == ranksPerChannel) {
        // if all ranks are refreshing wait for them to finish
        // and stall this state machine without taking any further
        // action, and do not schedule a new nextReqEvent
        return;
    }

    // pre-emptively set to false.  Overwrite if in READ_TO_WRITE
    // or WRITE_TO_READ state
    bool switched_cmd_type = false;
    if (busState == READ_TO_WRITE) {
        DPRINTF(DRAM, "Switching to writes after %d reads with %d reads "
                "waiting\n", readsThisTime, readQueue.size());

        // sample and reset the read-related stats as we are now
        // transitioning to writes, and all reads are done
        rdPerTurnAround.sample(readsThisTime);
        readsThisTime = 0;

        // now proceed to do the actual writes
        busState = WRITE;
        switched_cmd_type = true;
    } else if (busState == WRITE_TO_READ) {
        DPRINTF(DRAM, "Switching to reads after %d writes with %d writes "
                "waiting\n", writesThisTime, writeQueue.size());

        wrPerTurnAround.sample(writesThisTime);
        writesThisTime = 0;

        busState = READ;
        switched_cmd_type = true;
    }

    // when we get here it is either a read or a write
    if (busState == READ) {

        // track if we should switch or not
        bool switch_to_writes = false;

        if (readQueue.empty()) {
            // In the case there is no read request to go next,
            // trigger writes if we have passed the low threshold (or
            // if we are draining)
            if (!writeQueue.empty() &&
                (drainState() == DrainState::Draining ||
                 writeQueue.size() > writeLowThreshold)) {

                switch_to_writes = true;
            } else {
                // check if we are drained
                if (drainState() == DrainState::Draining &&
                    respQueue.empty()) {

                    DPRINTF(Drain, "DRAM controller done draining\n");
                    signalDrainDone();
                }

                // nothing to do, not even any point in scheduling an
                // event for the next request
                return;
            }
        } else {
            // bool to check if there is a read to a free rank
            bool found_read = false;

            // Figure out which read request goes next, and move it to the
            // front of the read queue
            // If we are changing command type, incorporate the minimum
            // bus turnaround delay which will be tCS (different rank) case
            found_read = chooseNext(readQueue,
                             switched_cmd_type ? tCS : 0);

            // if no read to an available rank is found then return
            // at this point. There could be writes to the available ranks
            // which are above the required threshold. However, to
            // avoid adding more complexity to the code, return and wait
            // for a refresh event to kick things into action again.
            if (!found_read)
                return;

            DRAMPacket* dram_pkt = readQueue.front();
            assert(dram_pkt->rankRef.isAvailable());
            // here we get a bit creative and shift the bus busy time not
            // just the tWTR, but also a CAS latency to capture the fact
            // that we are allowed to prepare a new bank, but not issue a
            // read command until after tWTR, in essence we capture a
            // bubble on the data bus that is tWTR + tCL
            if (switched_cmd_type && dram_pkt->rank == activeRank) {
                busBusyUntil += tWTR + tCL;
            }

            doDRAMAccess(dram_pkt);

            // At this point we're done dealing with the request
            readQueue.pop_front();

            // sanity check
            assert(dram_pkt->size <= burstSize);
            assert(dram_pkt->readyTime >= curTick());

            // Insert into response queue. It will be sent back to the
            // requestor at its readyTime
            if (respQueue.empty()) {
                assert(!respondEvent.scheduled());
                schedule(respondEvent, dram_pkt->readyTime);
            } else {
                assert(respQueue.back()->readyTime <= dram_pkt->readyTime);
                assert(respondEvent.scheduled());
            }

            respQueue.push_back(dram_pkt);

            // we have so many writes that we have to transition
            if (writeQueue.size() > writeHighThreshold) {
                switch_to_writes = true;
            }
        }

        // switching to writes, either because the read queue is empty
        // and the writes have passed the low threshold (or we are
        // draining), or because the writes hit the hight threshold
        if (switch_to_writes) {
            // transition to writing
            busState = READ_TO_WRITE;
        }
    } else {
        // bool to check if write to free rank is found
        bool found_write = false;

        // If we are changing command type, incorporate the minimum
        // bus turnaround delay
        found_write = chooseNext(writeQueue,
                                 switched_cmd_type ? std::min(tRTW, tCS) : 0);

        // if no writes to an available rank are found then return.
        // There could be reads to the available ranks. However, to avoid
        // adding more complexity to the code, return at this point and wait
        // for a refresh event to kick things into action again.
        if (!found_write)
            return;

        DRAMPacket* dram_pkt = writeQueue.front();
        assert(dram_pkt->rankRef.isAvailable());
        // sanity check
        assert(dram_pkt->size <= burstSize);

        // add a bubble to the data bus, as defined by the
        // tRTW when access is to the same rank as previous burst
        // Different rank timing is handled with tCS, which is
        // applied to colAllowedAt
        if (switched_cmd_type && dram_pkt->rank == activeRank) {
            busBusyUntil += tRTW;
        }

        doDRAMAccess(dram_pkt);

        writeQueue.pop_front();
        isInWriteQueue.erase(burstAlign(dram_pkt->addr));
        delete dram_pkt;

        // If we emptied the write queue, or got sufficiently below the
        // threshold (using the minWritesPerSwitch as the hysteresis) and
        // are not draining, or we have reads waiting and have done enough
        // writes, then switch to reads.
        if (writeQueue.empty() ||
            (writeQueue.size() + minWritesPerSwitch < writeLowThreshold &&
             drainState() != DrainState::Draining) ||
            (!readQueue.empty() && writesThisTime >= minWritesPerSwitch)) {
            // turn the bus back around for reads again
            busState = WRITE_TO_READ;

            // note that the we switch back to reads also in the idle
            // case, which eventually will check for any draining and
            // also pause any further scheduling if there is really
            // nothing to do
        }
    }
    // It is possible that a refresh to another rank kicks things back into
    // action before reaching this point.
    if (!nextReqEvent.scheduled())
        schedule(nextReqEvent, std::max(nextReqTime, curTick()));

    // If there is space available and we have writes waiting then let
    // them retry. This is done here to ensure that the retry does not
    // cause a nextReqEvent to be scheduled before we do so as part of
    // the next request processing
    if (retryWrReq && writeQueue.size() < writeBufferSize) {
        retryWrReq = false;
        port.sendRetryReq();
    }
}

pair<uint64_t, bool>
DRAMCtrl::minBankPrep(const deque<DRAMPacket*>& queue,
                      Tick min_col_at) const
{
    uint64_t bank_mask = 0;
    Tick min_act_at = MaxTick;

    // latest Tick for which ACT can occur without incurring additoinal
    // delay on the data bus
    const Tick hidden_act_max = std::max(min_col_at - tRCD, curTick());

    // Flag condition when burst can issue back-to-back with previous burst
    bool found_seamless_bank = false;

    // Flag condition when bank can be opened without incurring additional
    // delay on the data bus
    bool hidden_bank_prep = false;

    // determine if we have queued transactions targetting the
    // bank in question
    vector<bool> got_waiting(ranksPerChannel * banksPerRank, false);
    for (const auto& p : queue) {
        if (p->rankRef.isAvailable())
            got_waiting[p->bankId] = true;
    }

    // Find command with optimal bank timing
    // Will prioritize commands that can issue seamlessly.
    for (int i = 0; i < ranksPerChannel; i++) {
        for (int j = 0; j < banksPerRank; j++) {
            uint16_t bank_id = i * banksPerRank + j;

            // if we have waiting requests for the bank, and it is
            // amongst the first available, update the mask
            if (got_waiting[bank_id]) {
                // make sure this rank is not currently refreshing.
                assert(ranks[i]->isAvailable());
                // simplistic approximation of when the bank can issue
                // an activate, ignoring any rank-to-rank switching
                // cost in this calculation
                Tick act_at = ranks[i]->banks[j].openRow == Bank::NO_ROW ?
                    std::max(ranks[i]->banks[j].actAllowedAt, curTick()) :
                    std::max(ranks[i]->banks[j].preAllowedAt, curTick()) + tRP;

                // When is the earliest the R/W burst can issue?
                Tick col_at = std::max(ranks[i]->banks[j].colAllowedAt,
                                       act_at + tRCD);

                // bank can issue burst back-to-back (seamlessly) with
                // previous burst
                bool new_seamless_bank = col_at <= min_col_at;

                // if we found a new seamless bank or we have no
                // seamless banks, and got a bank with an earlier
                // activate time, it should be added to the bit mask
                if (new_seamless_bank ||
                    (!found_seamless_bank && act_at <= min_act_at)) {
                    // if we did not have a seamless bank before, and
                    // we do now, reset the bank mask, also reset it
                    // if we have not yet found a seamless bank and
                    // the activate time is smaller than what we have
                    // seen so far
                    if (!found_seamless_bank &&
                        (new_seamless_bank || act_at < min_act_at)) {
                        bank_mask = 0;
                    }

                    found_seamless_bank |= new_seamless_bank;

                    // ACT can occur 'behind the scenes'
                    hidden_bank_prep = act_at <= hidden_act_max;

                    // set the bit corresponding to the available bank
                    replaceBits(bank_mask, bank_id, bank_id, 1);
                    min_act_at = act_at;
                }
            }
        }
    }

    return make_pair(bank_mask, hidden_bank_prep);
}

DRAMCtrl::Rank::Rank(DRAMCtrl& _memory, const DRAMCtrlParams* _p)
    : EventManager(&_memory), memory(_memory),
      pwrStateTrans(PWR_IDLE), pwrState(PWR_IDLE), pwrStateTick(0),
      refreshState(REF_IDLE), refreshDueAt(0),
      power(_p, false), numBanksActive(0),
      activateEvent(*this), prechargeEvent(*this),
      refreshEvent(*this), powerEvent(*this)
{ }

void
DRAMCtrl::Rank::startup(Tick ref_tick)
{
    assert(ref_tick > curTick());

    pwrStateTick = curTick();

    // kick off the refresh, and give ourselves enough time to
    // precharge
    schedule(refreshEvent, ref_tick);
}

void
DRAMCtrl::Rank::suspend()
{
    deschedule(refreshEvent);
}

void
DRAMCtrl::Rank::checkDrainDone()
{
    // if this rank was waiting to drain it is now able to proceed to
    // precharge
    if (refreshState == REF_DRAIN) {
        DPRINTF(DRAM, "Refresh drain done, now precharging\n");

        refreshState = REF_PRE;

        // hand control back to the refresh event loop
        schedule(refreshEvent, curTick());
    }
}

void
DRAMCtrl::Rank::processActivateEvent()
{
    // we should transition to the active state as soon as any bank is active
    if (pwrState != PWR_ACT)
        // note that at this point numBanksActive could be back at
        // zero again due to a precharge scheduled in the future
        schedulePowerEvent(PWR_ACT, curTick());
}

void
DRAMCtrl::Rank::processPrechargeEvent()
{
    // if we reached zero, then special conditions apply as we track
    // if all banks are precharged for the power models
    if (numBanksActive == 0) {
        // we should transition to the idle state when the last bank
        // is precharged
        schedulePowerEvent(PWR_IDLE, curTick());
    }
}

void
DRAMCtrl::Rank::processRefreshEvent()
{
    // when first preparing the refresh, remember when it was due
    if (refreshState == REF_IDLE) {
        // remember when the refresh is due
        refreshDueAt = curTick();

        // proceed to drain
        refreshState = REF_DRAIN;

        DPRINTF(DRAM, "Refresh due\n");
    }

    // let any scheduled read or write to the same rank go ahead,
    // after which it will
    // hand control back to this event loop
    if (refreshState == REF_DRAIN) {
        // if a request is at the moment being handled and this request is
        // accessing the current rank then wait for it to finish
        if ((rank == memory.activeRank)
            && (memory.nextReqEvent.scheduled())) {
            // hand control over to the request loop until it is
            // evaluated next
            DPRINTF(DRAM, "Refresh awaiting draining\n");

            return;
        } else {
            refreshState = REF_PRE;
        }
    }

    // at this point, ensure that all banks are precharged
    if (refreshState == REF_PRE) {
        // precharge any active bank if we are not already in the idle
        // state
        if (pwrState != PWR_IDLE) {
            // at the moment, we use a precharge all even if there is
            // only a single bank open
            DPRINTF(DRAM, "Precharging all\n");

            // first determine when we can precharge
            Tick pre_at = curTick();

            for (auto &b : banks) {
                // respect both causality and any existing bank
                // constraints, some banks could already have a
                // (auto) precharge scheduled
                pre_at = std::max(b.preAllowedAt, pre_at);
            }

            // make sure all banks per rank are precharged, and for those that
            // already are, update their availability
            Tick act_allowed_at = pre_at + memory.tRP;

            for (auto &b : banks) {
                if (b.openRow != Bank::NO_ROW) {
                    memory.prechargeBank(*this, b, pre_at, false);
                } else {
                    b.actAllowedAt = std::max(b.actAllowedAt, act_allowed_at);
                    b.preAllowedAt = std::max(b.preAllowedAt, pre_at);
                }
            }

            // precharge all banks in rank
            power.powerlib.doCommand(MemCommand::PREA, 0,
                                     divCeil(pre_at, memory.tCK) -
                                     memory.timeStampOffset);

            DPRINTF(DRAMPower, "%llu,PREA,0,%d\n",
                    divCeil(pre_at, memory.tCK) -
                            memory.timeStampOffset, rank);
        } else {
            DPRINTF(DRAM, "All banks already precharged, starting refresh\n");

            // go ahead and kick the power state machine into gear if
            // we are already idle
            schedulePowerEvent(PWR_REF, curTick());
        }

        refreshState = REF_RUN;
        assert(numBanksActive == 0);

        // wait for all banks to be precharged, at which point the
        // power state machine will transition to the idle state, and
        // automatically move to a refresh, at that point it will also
        // call this method to get the refresh event loop going again
        return;
    }

    // last but not least we perform the actual refresh
    if (refreshState == REF_RUN) {
        // should never get here with any banks active
        assert(numBanksActive == 0);
        assert(pwrState == PWR_REF);

        Tick ref_done_at = curTick() + memory.tRFC;

        for (auto &b : banks) {
            b.actAllowedAt = ref_done_at;
        }

        // at the moment this affects all ranks
        power.powerlib.doCommand(MemCommand::REF, 0,
                                 divCeil(curTick(), memory.tCK) -
                                 memory.timeStampOffset);

        // at the moment sort the list of commands and update the counters
        // for DRAMPower libray when doing a refresh
        sort(power.powerlib.cmdList.begin(),
             power.powerlib.cmdList.end(), DRAMCtrl::sortTime);

        // update the counters for DRAMPower, passing false to
        // indicate that this is not the last command in the
        // list. DRAMPower requires this information for the
        // correct calculation of the background energy at the end
        // of the simulation. Ideally we would want to call this
        // function with true once at the end of the
        // simulation. However, the discarded energy is extremly
        // small and does not effect the final results.
        power.powerlib.updateCounters(false);

        // call the energy function
        power.powerlib.calcEnergy();

        // Update the stats
        updatePowerStats();

        DPRINTF(DRAMPower, "%llu,REF,0,%d\n", divCeil(curTick(), memory.tCK) -
                memory.timeStampOffset, rank);

        // make sure we did not wait so long that we cannot make up
        // for it
        if (refreshDueAt + memory.tREFI < ref_done_at) {
            fatal("Refresh was delayed so long we cannot catch up\n");
        }

        // compensate for the delay in actually performing the refresh
        // when scheduling the next one
        schedule(refreshEvent, refreshDueAt + memory.tREFI - memory.tRP);

        assert(!powerEvent.scheduled());

        // move to the idle power state once the refresh is done, this
        // will also move the refresh state machine to the refresh
        // idle state
        schedulePowerEvent(PWR_IDLE, ref_done_at);

        DPRINTF(DRAMState, "Refresh done at %llu and next refresh at %llu\n",
                ref_done_at, refreshDueAt + memory.tREFI);
    }
}

void
DRAMCtrl::Rank::schedulePowerEvent(PowerState pwr_state, Tick tick)
{
    // respect causality
    assert(tick >= curTick());

    if (!powerEvent.scheduled()) {
        DPRINTF(DRAMState, "Scheduling power event at %llu to state %d\n",
                tick, pwr_state);

        // insert the new transition
        pwrStateTrans = pwr_state;

        schedule(powerEvent, tick);
    } else {
        panic("Scheduled power event at %llu to state %d, "
              "with scheduled event at %llu to %d\n", tick, pwr_state,
              powerEvent.when(), pwrStateTrans);
    }
}

void
DRAMCtrl::Rank::processPowerEvent()
{
    // remember where we were, and for how long
    Tick duration = curTick() - pwrStateTick;
    PowerState prev_state = pwrState;

    // update the accounting
    pwrStateTime[prev_state] += duration;

    pwrState = pwrStateTrans;
    pwrStateTick = curTick();

    if (pwrState == PWR_IDLE) {
        DPRINTF(DRAMState, "All banks precharged\n");

        // if we were refreshing, make sure we start scheduling requests again
        if (prev_state == PWR_REF) {
            DPRINTF(DRAMState, "Was refreshing for %llu ticks\n", duration);
            assert(pwrState == PWR_IDLE);

            // kick things into action again
            refreshState = REF_IDLE;
            // a request event could be already scheduled by the state
            // machine of the other rank
            if (!memory.nextReqEvent.scheduled())
                schedule(memory.nextReqEvent, curTick());
        } else {
            assert(prev_state == PWR_ACT);

            // if we have a pending refresh, and are now moving to
            // the idle state, direclty transition to a refresh
            if (refreshState == REF_RUN) {
                // there should be nothing waiting at this point
                assert(!powerEvent.scheduled());

                // update the state in zero time and proceed below
                pwrState = PWR_REF;
            }
        }
    }

    // we transition to the refresh state, let the refresh state
    // machine know of this state update and let it deal with the
    // scheduling of the next power state transition as well as the
    // following refresh
    if (pwrState == PWR_REF) {
        DPRINTF(DRAMState, "Refreshing\n");
        // kick the refresh event loop into action again, and that
        // in turn will schedule a transition to the idle power
        // state once the refresh is done
        assert(refreshState == REF_RUN);
        processRefreshEvent();
    }
}

void
DRAMCtrl::Rank::updatePowerStats()
{
    // Get the energy and power from DRAMPower
    Data::MemoryPowerModel::Energy energy =
        power.powerlib.getEnergy();
    Data::MemoryPowerModel::Power rank_power =
        power.powerlib.getPower();

    actEnergy = energy.act_energy * memory.devicesPerRank;
    preEnergy = energy.pre_energy * memory.devicesPerRank;
    readEnergy = energy.read_energy * memory.devicesPerRank;
    writeEnergy = energy.write_energy * memory.devicesPerRank;
    refreshEnergy = energy.ref_energy * memory.devicesPerRank;
    actBackEnergy = energy.act_stdby_energy * memory.devicesPerRank;
    preBackEnergy = energy.pre_stdby_energy * memory.devicesPerRank;
    totalEnergy = energy.total_energy * memory.devicesPerRank;
    averagePower = rank_power.average_power * memory.devicesPerRank;
}

void
DRAMCtrl::Rank::regStats()
{
    using namespace Stats;

    pwrStateTime
        .init(5)
        .name(name() + ".memoryStateTime")
        .desc("Time in different power states");
    pwrStateTime.subname(0, "IDLE");
    pwrStateTime.subname(1, "REF");
    pwrStateTime.subname(2, "PRE_PDN");
    pwrStateTime.subname(3, "ACT");
    pwrStateTime.subname(4, "ACT_PDN");

    actEnergy
        .name(name() + ".actEnergy")
        .desc("Energy for activate commands per rank (pJ)");

    preEnergy
        .name(name() + ".preEnergy")
        .desc("Energy for precharge commands per rank (pJ)");

    readEnergy
        .name(name() + ".readEnergy")
        .desc("Energy for read commands per rank (pJ)");

    writeEnergy
        .name(name() + ".writeEnergy")
        .desc("Energy for write commands per rank (pJ)");

    refreshEnergy
        .name(name() + ".refreshEnergy")
        .desc("Energy for refresh commands per rank (pJ)");

    actBackEnergy
        .name(name() + ".actBackEnergy")
        .desc("Energy for active background per rank (pJ)");

    preBackEnergy
        .name(name() + ".preBackEnergy")
        .desc("Energy for precharge background per rank (pJ)");

    totalEnergy
        .name(name() + ".totalEnergy")
        .desc("Total energy per rank (pJ)");

    averagePower
        .name(name() + ".averagePower")
        .desc("Core power per rank (mW)");
}
void
DRAMCtrl::regStats()
{
    using namespace Stats;

    AbstractMemory::regStats();

    for (auto r : ranks) {
        r->regStats();
    }

    readReqs
        .name(name() + ".readReqs")
        .desc("Number of read requests accepted");

    writeReqs
        .name(name() + ".writeReqs")
        .desc("Number of write requests accepted");

    readBursts
        .name(name() + ".readBursts")
        .desc("Number of DRAM read bursts, "
              "including those serviced by the write queue");

    writeBursts
        .name(name() + ".writeBursts")
        .desc("Number of DRAM write bursts, "
              "including those merged in the write queue");

    servicedByWrQ
        .name(name() + ".servicedByWrQ")
        .desc("Number of DRAM read bursts serviced by the write queue");

    mergedWrBursts
        .name(name() + ".mergedWrBursts")
        .desc("Number of DRAM write bursts merged with an existing one");

    neitherReadNorWrite
        .name(name() + ".neitherReadNorWriteReqs")
        .desc("Number of requests that are neither read nor write");

    perBankRdBursts
        .init(banksPerRank * ranksPerChannel)
        .name(name() + ".perBankRdBursts")
        .desc("Per bank write bursts");

    perBankWrBursts
        .init(banksPerRank * ranksPerChannel)
        .name(name() + ".perBankWrBursts")
        .desc("Per bank write bursts");

    avgRdQLen
        .name(name() + ".avgRdQLen")
        .desc("Average read queue length when enqueuing")
        .precision(2);

    avgWrQLen
        .name(name() + ".avgWrQLen")
        .desc("Average write queue length when enqueuing")
        .precision(2);

    totQLat
        .name(name() + ".totQLat")
        .desc("Total ticks spent queuing");

    totBusLat
        .name(name() + ".totBusLat")
        .desc("Total ticks spent in databus transfers");

    totMemAccLat
        .name(name() + ".totMemAccLat")
        .desc("Total ticks spent from burst creation until serviced "
              "by the DRAM");

    avgQLat
        .name(name() + ".avgQLat")
        .desc("Average queueing delay per DRAM burst")
        .precision(2);

    avgQLat = totQLat / (readBursts - servicedByWrQ);

    avgBusLat
        .name(name() + ".avgBusLat")
        .desc("Average bus latency per DRAM burst")
        .precision(2);

    avgBusLat = totBusLat / (readBursts - servicedByWrQ);

    avgMemAccLat
        .name(name() + ".avgMemAccLat")
        .desc("Average memory access latency per DRAM burst")
        .precision(2);

    avgMemAccLat = totMemAccLat / (readBursts - servicedByWrQ);

    numRdRetry
        .name(name() + ".numRdRetry")
        .desc("Number of times read queue was full causing retry");

    numWrRetry
        .name(name() + ".numWrRetry")
        .desc("Number of times write queue was full causing retry");

    readRowHits
        .name(name() + ".readRowHits")
        .desc("Number of row buffer hits during reads");

    writeRowHits
        .name(name() + ".writeRowHits")
        .desc("Number of row buffer hits during writes");

    readRowHitRate
        .name(name() + ".readRowHitRate")
        .desc("Row buffer hit rate for reads")
        .precision(2);

    readRowHitRate = (readRowHits / (readBursts - servicedByWrQ)) * 100;

    writeRowHitRate
        .name(name() + ".writeRowHitRate")
        .desc("Row buffer hit rate for writes")
        .precision(2);

    writeRowHitRate = (writeRowHits / (writeBursts - mergedWrBursts)) * 100;

    readPktSize
        .init(ceilLog2(burstSize) + 1)
        .name(name() + ".readPktSize")
        .desc("Read request sizes (log2)");

     writePktSize
        .init(ceilLog2(burstSize) + 1)
        .name(name() + ".writePktSize")
        .desc("Write request sizes (log2)");

     rdQLenPdf
        .init(readBufferSize)
        .name(name() + ".rdQLenPdf")
        .desc("What read queue length does an incoming req see");

     wrQLenPdf
        .init(writeBufferSize)
        .name(name() + ".wrQLenPdf")
        .desc("What write queue length does an incoming req see");

     bytesPerActivate
         .init(maxAccessesPerRow)
         .name(name() + ".bytesPerActivate")
         .desc("Bytes accessed per row activation")
         .flags(nozero);

     rdPerTurnAround
         .init(readBufferSize)
         .name(name() + ".rdPerTurnAround")
         .desc("Reads before turning the bus around for writes")
         .flags(nozero);

     wrPerTurnAround
         .init(writeBufferSize)
         .name(name() + ".wrPerTurnAround")
         .desc("Writes before turning the bus around for reads")
         .flags(nozero);

    bytesReadDRAM
        .name(name() + ".bytesReadDRAM")
        .desc("Total number of bytes read from DRAM");

    bytesReadWrQ
        .name(name() + ".bytesReadWrQ")
        .desc("Total number of bytes read from write queue");

    bytesWritten
        .name(name() + ".bytesWritten")
        .desc("Total number of bytes written to DRAM");

    bytesReadSys
        .name(name() + ".bytesReadSys")
        .desc("Total read bytes from the system interface side");

    bytesWrittenSys
        .name(name() + ".bytesWrittenSys")
        .desc("Total written bytes from the system interface side");

    avgRdBW
        .name(name() + ".avgRdBW")
        .desc("Average DRAM read bandwidth in MiByte/s")
        .precision(2);

    avgRdBW = (bytesReadDRAM / 1000000) / simSeconds;

    avgWrBW
        .name(name() + ".avgWrBW")
        .desc("Average achieved write bandwidth in MiByte/s")
        .precision(2);

    avgWrBW = (bytesWritten / 1000000) / simSeconds;

    avgRdBWSys
        .name(name() + ".avgRdBWSys")
        .desc("Average system read bandwidth in MiByte/s")
        .precision(2);

    avgRdBWSys = (bytesReadSys / 1000000) / simSeconds;

    avgWrBWSys
        .name(name() + ".avgWrBWSys")
        .desc("Average system write bandwidth in MiByte/s")
        .precision(2);

    avgWrBWSys = (bytesWrittenSys / 1000000) / simSeconds;

    peakBW
        .name(name() + ".peakBW")
        .desc("Theoretical peak bandwidth in MiByte/s")
        .precision(2);

    peakBW = (SimClock::Frequency / tBURST) * burstSize / 1000000;

    busUtil
        .name(name() + ".busUtil")
        .desc("Data bus utilization in percentage")
        .precision(2);
    busUtil = (avgRdBW + avgWrBW) / peakBW * 100;

    totGap
        .name(name() + ".totGap")
        .desc("Total gap between requests");

    avgGap
        .name(name() + ".avgGap")
        .desc("Average gap between requests")
        .precision(2);

    avgGap = totGap / (readReqs + writeReqs);

    // Stats for DRAM Power calculation based on Micron datasheet
    busUtilRead
        .name(name() + ".busUtilRead")
        .desc("Data bus utilization in percentage for reads")
        .precision(2);

    busUtilRead = avgRdBW / peakBW * 100;

    busUtilWrite
        .name(name() + ".busUtilWrite")
        .desc("Data bus utilization in percentage for writes")
        .precision(2);

    busUtilWrite = avgWrBW / peakBW * 100;

    pageHitRate
        .name(name() + ".pageHitRate")
        .desc("Row buffer hit rate, read and write combined")
        .precision(2);

    pageHitRate = (writeRowHits + readRowHits) /
        (writeBursts - mergedWrBursts + readBursts - servicedByWrQ) * 100;
}

void
DRAMCtrl::recvFunctional(PacketPtr pkt)
{
    // rely on the abstract memory
    functionalAccess(pkt);
}

BaseSlavePort&
DRAMCtrl::getSlavePort(const string &if_name, PortID idx)
{
    if (if_name != "port") {
        return MemObject::getSlavePort(if_name, idx);
    } else {
        return port;
    }
}

DrainState
DRAMCtrl::drain()
{
    // if there is anything in any of our internal queues, keep track
    // of that as well
    if (!(writeQueue.empty() && readQueue.empty() && respQueue.empty())) {
        DPRINTF(Drain, "DRAM controller not drained, write: %d, read: %d,"
                " resp: %d\n", writeQueue.size(), readQueue.size(),
                respQueue.size());

        // the only part that is not drained automatically over time
        // is the write queue, thus kick things into action if needed
        if (!writeQueue.empty() && !nextReqEvent.scheduled()) {
            schedule(nextReqEvent, curTick());
        }
        return DrainState::Draining;
    } else {
        return DrainState::Drained;
    }
}

void
DRAMCtrl::drainResume()
{
    if (!isTimingMode && system()->isTimingMode()) {
        // if we switched to timing mode, kick things into action,
        // and behave as if we restored from a checkpoint
        startup();
    } else if (isTimingMode && !system()->isTimingMode()) {
        // if we switch from timing mode, stop the refresh events to
        // not cause issues with KVM
        for (auto r : ranks) {
            r->suspend();
        }
    }

    // update the mode
    isTimingMode = system()->isTimingMode();
}

DRAMCtrl::MemoryPort::MemoryPort(const std::string& name, DRAMCtrl& _memory)
    : QueuedSlavePort(name, &_memory, queue), queue(_memory, *this),
      memory(_memory)
{ }

AddrRangeList
DRAMCtrl::MemoryPort::getAddrRanges() const
{
    AddrRangeList ranges;
    ranges.push_back(memory.getAddrRange());
    return ranges;
}

void
DRAMCtrl::MemoryPort::recvFunctional(PacketPtr pkt)
{
    pkt->pushLabel(memory.name());

    if (!queue.checkFunctional(pkt)) {
        // Default implementation of SimpleTimingPort::recvFunctional()
        // calls recvAtomic() and throws away the latency; we can save a
        // little here by just not calculating the latency.
        memory.recvFunctional(pkt);
    }

    pkt->popLabel();
}

Tick
DRAMCtrl::MemoryPort::recvAtomic(PacketPtr pkt)
{
    return memory.recvAtomic(pkt);
}

bool
DRAMCtrl::MemoryPort::recvTimingReq(PacketPtr pkt)
{
    // pass it to the memory controller
    return memory.recvTimingReq(pkt);
}

DRAMCtrl*
DRAMCtrlParams::create()
{
    return new DRAMCtrl(this);
}