coherent_xbar.cc revision 10888:85a001f2193b
1/* 2 * Copyright (c) 2011-2015 ARM Limited 3 * All rights reserved 4 * 5 * The license below extends only to copyright in the software and shall 6 * not be construed as granting a license to any other intellectual 7 * property including but not limited to intellectual property relating 8 * to a hardware implementation of the functionality of the software 9 * licensed hereunder. You may use the software subject to the license 10 * terms below provided that you ensure that this notice is replicated 11 * unmodified and in its entirety in all distributions of the software, 12 * modified or unmodified, in source code or in binary form. 13 * 14 * Copyright (c) 2006 The Regents of The University of Michigan 15 * All rights reserved. 16 * 17 * Redistribution and use in source and binary forms, with or without 18 * modification, are permitted provided that the following conditions are 19 * met: redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer; 21 * redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution; 24 * neither the name of the copyright holders nor the names of its 25 * contributors may be used to endorse or promote products derived from 26 * this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 * 40 * Authors: Ali Saidi 41 * Andreas Hansson 42 * William Wang 43 */ 44 45/** 46 * @file 47 * Definition of a crossbar object. 48 */ 49 50#include "base/misc.hh" 51#include "base/trace.hh" 52#include "debug/AddrRanges.hh" 53#include "debug/CoherentXBar.hh" 54#include "mem/coherent_xbar.hh" 55#include "sim/system.hh" 56 57CoherentXBar::CoherentXBar(const CoherentXBarParams *p) 58 : BaseXBar(p), system(p->system), snoopFilter(p->snoop_filter), 59 snoopResponseLatency(p->snoop_response_latency) 60{ 61 // create the ports based on the size of the master and slave 62 // vector ports, and the presence of the default port, the ports 63 // are enumerated starting from zero 64 for (int i = 0; i < p->port_master_connection_count; ++i) { 65 std::string portName = csprintf("%s.master[%d]", name(), i); 66 MasterPort* bp = new CoherentXBarMasterPort(portName, *this, i); 67 masterPorts.push_back(bp); 68 reqLayers.push_back(new ReqLayer(*bp, *this, 69 csprintf(".reqLayer%d", i))); 70 snoopLayers.push_back(new SnoopRespLayer(*bp, *this, 71 csprintf(".snoopLayer%d", i))); 72 } 73 74 // see if we have a default slave device connected and if so add 75 // our corresponding master port 76 if (p->port_default_connection_count) { 77 defaultPortID = masterPorts.size(); 78 std::string portName = name() + ".default"; 79 MasterPort* bp = new CoherentXBarMasterPort(portName, *this, 80 defaultPortID); 81 masterPorts.push_back(bp); 82 reqLayers.push_back(new ReqLayer(*bp, *this, csprintf(".reqLayer%d", 83 defaultPortID))); 84 snoopLayers.push_back(new SnoopRespLayer(*bp, *this, 85 csprintf(".snoopLayer%d", 86 defaultPortID))); 87 } 88 89 // create the slave ports, once again starting at zero 90 for (int i = 0; i < p->port_slave_connection_count; ++i) { 91 std::string portName = csprintf("%s.slave[%d]", name(), i); 92 QueuedSlavePort* bp = new CoherentXBarSlavePort(portName, *this, i); 93 slavePorts.push_back(bp); 94 respLayers.push_back(new RespLayer(*bp, *this, 95 csprintf(".respLayer%d", i))); 96 snoopRespPorts.push_back(new SnoopRespPort(*bp, *this)); 97 } 98 99 if (snoopFilter) 100 snoopFilter->setSlavePorts(slavePorts); 101 102 clearPortCache(); 103} 104 105CoherentXBar::~CoherentXBar() 106{ 107 for (auto l: reqLayers) 108 delete l; 109 for (auto l: respLayers) 110 delete l; 111 for (auto l: snoopLayers) 112 delete l; 113 for (auto p: snoopRespPorts) 114 delete p; 115} 116 117void 118CoherentXBar::init() 119{ 120 // the base class is responsible for determining the block size 121 BaseXBar::init(); 122 123 // iterate over our slave ports and determine which of our 124 // neighbouring master ports are snooping and add them as snoopers 125 for (const auto& p: slavePorts) { 126 // check if the connected master port is snooping 127 if (p->isSnooping()) { 128 DPRINTF(AddrRanges, "Adding snooping master %s\n", 129 p->getMasterPort().name()); 130 snoopPorts.push_back(p); 131 } 132 } 133 134 if (snoopPorts.empty()) 135 warn("CoherentXBar %s has no snooping ports attached!\n", name()); 136} 137 138bool 139CoherentXBar::recvTimingReq(PacketPtr pkt, PortID slave_port_id) 140{ 141 // @todo temporary hack to deal with memory corruption issue until 142 // 4-phase transactions are complete 143 for (int x = 0; x < pendingDelete.size(); x++) 144 delete pendingDelete[x]; 145 pendingDelete.clear(); 146 147 // determine the source port based on the id 148 SlavePort *src_port = slavePorts[slave_port_id]; 149 150 // remember if the packet is an express snoop 151 bool is_express_snoop = pkt->isExpressSnoop(); 152 bool is_inhibited = pkt->memInhibitAsserted(); 153 // for normal requests, going downstream, the express snoop flag 154 // and the inhibited flag should always be the same 155 assert(is_express_snoop == is_inhibited); 156 157 // determine the destination based on the address 158 PortID master_port_id = findPort(pkt->getAddr()); 159 160 // test if the crossbar should be considered occupied for the current 161 // port, and exclude express snoops from the check 162 if (!is_express_snoop && !reqLayers[master_port_id]->tryTiming(src_port)) { 163 DPRINTF(CoherentXBar, "recvTimingReq: src %s %s 0x%x BUSY\n", 164 src_port->name(), pkt->cmdString(), pkt->getAddr()); 165 return false; 166 } 167 168 DPRINTF(CoherentXBar, "recvTimingReq: src %s %s expr %d 0x%x\n", 169 src_port->name(), pkt->cmdString(), is_express_snoop, 170 pkt->getAddr()); 171 172 // store size and command as they might be modified when 173 // forwarding the packet 174 unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0; 175 unsigned int pkt_cmd = pkt->cmdToIndex(); 176 177 // store the old header delay so we can restore it if needed 178 Tick old_header_delay = pkt->headerDelay; 179 180 // a request sees the frontend and forward latency 181 Tick xbar_delay = (frontendLatency + forwardLatency) * clockPeriod(); 182 183 // set the packet header and payload delay 184 calcPacketTiming(pkt, xbar_delay); 185 186 // determine how long to be crossbar layer is busy 187 Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay; 188 189 if (!system->bypassCaches()) { 190 // the packet is a memory-mapped request and should be 191 // broadcasted to our snoopers but the source 192 if (snoopFilter) { 193 // check with the snoop filter where to forward this packet 194 auto sf_res = snoopFilter->lookupRequest(pkt, *src_port); 195 // If SnoopFilter is enabled, the total time required by a packet 196 // to be delivered through the xbar has to be charged also with 197 // to lookup latency of the snoop filter (sf_res.second). 198 pkt->headerDelay += sf_res.second * clockPeriod(); 199 packetFinishTime += sf_res.second * clockPeriod(); 200 DPRINTF(CoherentXBar, "recvTimingReq: src %s %s 0x%x"\ 201 " SF size: %i lat: %i\n", src_port->name(), 202 pkt->cmdString(), pkt->getAddr(), sf_res.first.size(), 203 sf_res.second); 204 forwardTiming(pkt, slave_port_id, sf_res.first); 205 } else { 206 forwardTiming(pkt, slave_port_id); 207 } 208 } 209 210 // forwardTiming snooped into peer caches of the sender, and if 211 // this is a clean evict, but the packet is found in a cache, do 212 // not forward it 213 if (pkt->cmd == MemCmd::CleanEvict && pkt->isBlockCached()) { 214 DPRINTF(CoherentXBar, "recvTimingReq: Clean evict 0x%x still cached, " 215 "not forwarding\n", pkt->getAddr()); 216 217 // update the layer state and schedule an idle event 218 reqLayers[master_port_id]->succeededTiming(packetFinishTime); 219 pendingDelete.push_back(pkt); 220 return true; 221 } 222 223 // remember if the packet will generate a snoop response 224 const bool expect_snoop_resp = !is_inhibited && pkt->memInhibitAsserted(); 225 const bool expect_response = pkt->needsResponse() && 226 !pkt->memInhibitAsserted(); 227 228 // Note: Cannot create a copy of the full packet, here. 229 MemCmd orig_cmd(pkt->cmd); 230 231 // since it is a normal request, attempt to send the packet 232 bool success = masterPorts[master_port_id]->sendTimingReq(pkt); 233 234 if (snoopFilter && !system->bypassCaches()) { 235 // The packet may already be overwritten by the sendTimingReq function. 236 // The snoop filter needs to see the original request *and* the return 237 // status of the send operation, so we need to recreate the original 238 // request. Atomic mode does not have the issue, as there the send 239 // operation and the response happen instantaneously and don't need two 240 // phase tracking. 241 MemCmd tmp_cmd(pkt->cmd); 242 pkt->cmd = orig_cmd; 243 // Let the snoop filter know about the success of the send operation 244 snoopFilter->updateRequest(pkt, *src_port, !success); 245 pkt->cmd = tmp_cmd; 246 } 247 248 // check if we were successful in sending the packet onwards 249 if (!success) { 250 // express snoops and inhibited packets should never be forced 251 // to retry 252 assert(!is_express_snoop); 253 assert(!pkt->memInhibitAsserted()); 254 255 // restore the header delay 256 pkt->headerDelay = old_header_delay; 257 258 DPRINTF(CoherentXBar, "recvTimingReq: src %s %s 0x%x RETRY\n", 259 src_port->name(), pkt->cmdString(), pkt->getAddr()); 260 261 // update the layer state and schedule an idle event 262 reqLayers[master_port_id]->failedTiming(src_port, 263 clockEdge(Cycles(1))); 264 } else { 265 // express snoops currently bypass the crossbar state entirely 266 if (!is_express_snoop) { 267 // if this particular request will generate a snoop 268 // response 269 if (expect_snoop_resp) { 270 // we should never have an exsiting request outstanding 271 assert(outstandingSnoop.find(pkt->req) == 272 outstandingSnoop.end()); 273 outstandingSnoop.insert(pkt->req); 274 275 // basic sanity check on the outstanding snoops 276 panic_if(outstandingSnoop.size() > 512, 277 "Outstanding snoop requests exceeded 512\n"); 278 } 279 280 // remember where to route the normal response to 281 if (expect_response || expect_snoop_resp) { 282 assert(routeTo.find(pkt->req) == routeTo.end()); 283 routeTo[pkt->req] = slave_port_id; 284 285 panic_if(routeTo.size() > 512, 286 "Routing table exceeds 512 packets\n"); 287 } 288 289 // update the layer state and schedule an idle event 290 reqLayers[master_port_id]->succeededTiming(packetFinishTime); 291 } 292 293 // stats updates only consider packets that were successfully sent 294 pktCount[slave_port_id][master_port_id]++; 295 pktSize[slave_port_id][master_port_id] += pkt_size; 296 transDist[pkt_cmd]++; 297 298 if (is_express_snoop) 299 snoops++; 300 } 301 302 return success; 303} 304 305bool 306CoherentXBar::recvTimingResp(PacketPtr pkt, PortID master_port_id) 307{ 308 // determine the source port based on the id 309 MasterPort *src_port = masterPorts[master_port_id]; 310 311 // determine the destination 312 const auto route_lookup = routeTo.find(pkt->req); 313 assert(route_lookup != routeTo.end()); 314 const PortID slave_port_id = route_lookup->second; 315 assert(slave_port_id != InvalidPortID); 316 assert(slave_port_id < respLayers.size()); 317 318 // test if the crossbar should be considered occupied for the 319 // current port 320 if (!respLayers[slave_port_id]->tryTiming(src_port)) { 321 DPRINTF(CoherentXBar, "recvTimingResp: src %s %s 0x%x BUSY\n", 322 src_port->name(), pkt->cmdString(), pkt->getAddr()); 323 return false; 324 } 325 326 DPRINTF(CoherentXBar, "recvTimingResp: src %s %s 0x%x\n", 327 src_port->name(), pkt->cmdString(), pkt->getAddr()); 328 329 // store size and command as they might be modified when 330 // forwarding the packet 331 unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0; 332 unsigned int pkt_cmd = pkt->cmdToIndex(); 333 334 // a response sees the response latency 335 Tick xbar_delay = responseLatency * clockPeriod(); 336 337 // set the packet header and payload delay 338 calcPacketTiming(pkt, xbar_delay); 339 340 // determine how long to be crossbar layer is busy 341 Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay; 342 343 if (snoopFilter && !system->bypassCaches()) { 344 // let the snoop filter inspect the response and update its state 345 snoopFilter->updateResponse(pkt, *slavePorts[slave_port_id]); 346 } 347 348 // send the packet through the destination slave port and pay for 349 // any outstanding header delay 350 Tick latency = pkt->headerDelay; 351 pkt->headerDelay = 0; 352 slavePorts[slave_port_id]->schedTimingResp(pkt, curTick() + latency); 353 354 // remove the request from the routing table 355 routeTo.erase(route_lookup); 356 357 respLayers[slave_port_id]->succeededTiming(packetFinishTime); 358 359 // stats updates 360 pktCount[slave_port_id][master_port_id]++; 361 pktSize[slave_port_id][master_port_id] += pkt_size; 362 transDist[pkt_cmd]++; 363 364 return true; 365} 366 367void 368CoherentXBar::recvTimingSnoopReq(PacketPtr pkt, PortID master_port_id) 369{ 370 DPRINTF(CoherentXBar, "recvTimingSnoopReq: src %s %s 0x%x\n", 371 masterPorts[master_port_id]->name(), pkt->cmdString(), 372 pkt->getAddr()); 373 374 // update stats here as we know the forwarding will succeed 375 transDist[pkt->cmdToIndex()]++; 376 snoops++; 377 378 // we should only see express snoops from caches 379 assert(pkt->isExpressSnoop()); 380 381 // remeber if the packet is inhibited so we can see if it changes 382 const bool is_inhibited = pkt->memInhibitAsserted(); 383 384 if (snoopFilter) { 385 // let the Snoop Filter work its magic and guide probing 386 auto sf_res = snoopFilter->lookupSnoop(pkt); 387 // No timing here: packetFinishTime += sf_res.second * clockPeriod(); 388 DPRINTF(CoherentXBar, "recvTimingSnoopReq: src %s %s 0x%x"\ 389 " SF size: %i lat: %i\n", masterPorts[master_port_id]->name(), 390 pkt->cmdString(), pkt->getAddr(), sf_res.first.size(), 391 sf_res.second); 392 393 // forward to all snoopers 394 forwardTiming(pkt, InvalidPortID, sf_res.first); 395 } else { 396 forwardTiming(pkt, InvalidPortID); 397 } 398 399 // if we can expect a response, remember how to route it 400 if (!is_inhibited && pkt->memInhibitAsserted()) { 401 assert(routeTo.find(pkt->req) == routeTo.end()); 402 routeTo[pkt->req] = master_port_id; 403 } 404 405 // a snoop request came from a connected slave device (one of 406 // our master ports), and if it is not coming from the slave 407 // device responsible for the address range something is 408 // wrong, hence there is nothing further to do as the packet 409 // would be going back to where it came from 410 assert(master_port_id == findPort(pkt->getAddr())); 411} 412 413bool 414CoherentXBar::recvTimingSnoopResp(PacketPtr pkt, PortID slave_port_id) 415{ 416 // determine the source port based on the id 417 SlavePort* src_port = slavePorts[slave_port_id]; 418 419 // get the destination 420 const auto route_lookup = routeTo.find(pkt->req); 421 assert(route_lookup != routeTo.end()); 422 const PortID dest_port_id = route_lookup->second; 423 assert(dest_port_id != InvalidPortID); 424 425 // determine if the response is from a snoop request we 426 // created as the result of a normal request (in which case it 427 // should be in the outstandingSnoop), or if we merely forwarded 428 // someone else's snoop request 429 const bool forwardAsSnoop = outstandingSnoop.find(pkt->req) == 430 outstandingSnoop.end(); 431 432 // test if the crossbar should be considered occupied for the 433 // current port, note that the check is bypassed if the response 434 // is being passed on as a normal response since this is occupying 435 // the response layer rather than the snoop response layer 436 if (forwardAsSnoop) { 437 assert(dest_port_id < snoopLayers.size()); 438 if (!snoopLayers[dest_port_id]->tryTiming(src_port)) { 439 DPRINTF(CoherentXBar, "recvTimingSnoopResp: src %s %s 0x%x BUSY\n", 440 src_port->name(), pkt->cmdString(), pkt->getAddr()); 441 return false; 442 } 443 } else { 444 // get the master port that mirrors this slave port internally 445 MasterPort* snoop_port = snoopRespPorts[slave_port_id]; 446 assert(dest_port_id < respLayers.size()); 447 if (!respLayers[dest_port_id]->tryTiming(snoop_port)) { 448 DPRINTF(CoherentXBar, "recvTimingSnoopResp: src %s %s 0x%x BUSY\n", 449 snoop_port->name(), pkt->cmdString(), pkt->getAddr()); 450 return false; 451 } 452 } 453 454 DPRINTF(CoherentXBar, "recvTimingSnoopResp: src %s %s 0x%x\n", 455 src_port->name(), pkt->cmdString(), pkt->getAddr()); 456 457 // store size and command as they might be modified when 458 // forwarding the packet 459 unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0; 460 unsigned int pkt_cmd = pkt->cmdToIndex(); 461 462 // responses are never express snoops 463 assert(!pkt->isExpressSnoop()); 464 465 // a snoop response sees the snoop response latency, and if it is 466 // forwarded as a normal response, the response latency 467 Tick xbar_delay = 468 (forwardAsSnoop ? snoopResponseLatency : responseLatency) * 469 clockPeriod(); 470 471 // set the packet header and payload delay 472 calcPacketTiming(pkt, xbar_delay); 473 474 // determine how long to be crossbar layer is busy 475 Tick packetFinishTime = clockEdge(Cycles(1)) + pkt->payloadDelay; 476 477 // forward it either as a snoop response or a normal response 478 if (forwardAsSnoop) { 479 // this is a snoop response to a snoop request we forwarded, 480 // e.g. coming from the L1 and going to the L2, and it should 481 // be forwarded as a snoop response 482 483 if (snoopFilter) { 484 // update the probe filter so that it can properly track the line 485 snoopFilter->updateSnoopForward(pkt, *slavePorts[slave_port_id], 486 *masterPorts[dest_port_id]); 487 } 488 489 bool success M5_VAR_USED = 490 masterPorts[dest_port_id]->sendTimingSnoopResp(pkt); 491 pktCount[slave_port_id][dest_port_id]++; 492 pktSize[slave_port_id][dest_port_id] += pkt_size; 493 assert(success); 494 495 snoopLayers[dest_port_id]->succeededTiming(packetFinishTime); 496 } else { 497 // we got a snoop response on one of our slave ports, 498 // i.e. from a coherent master connected to the crossbar, and 499 // since we created the snoop request as part of recvTiming, 500 // this should now be a normal response again 501 outstandingSnoop.erase(pkt->req); 502 503 // this is a snoop response from a coherent master, hence it 504 // should never go back to where the snoop response came from, 505 // but instead to where the original request came from 506 assert(slave_port_id != dest_port_id); 507 508 if (snoopFilter) { 509 // update the probe filter so that it can properly track the line 510 snoopFilter->updateSnoopResponse(pkt, *slavePorts[slave_port_id], 511 *slavePorts[dest_port_id]); 512 } 513 514 DPRINTF(CoherentXBar, "recvTimingSnoopResp: src %s %s 0x%x"\ 515 " FWD RESP\n", src_port->name(), pkt->cmdString(), 516 pkt->getAddr()); 517 518 // as a normal response, it should go back to a master through 519 // one of our slave ports, we also pay for any outstanding 520 // header latency 521 Tick latency = pkt->headerDelay; 522 pkt->headerDelay = 0; 523 slavePorts[dest_port_id]->schedTimingResp(pkt, curTick() + latency); 524 525 respLayers[dest_port_id]->succeededTiming(packetFinishTime); 526 } 527 528 // remove the request from the routing table 529 routeTo.erase(route_lookup); 530 531 // stats updates 532 transDist[pkt_cmd]++; 533 snoops++; 534 535 return true; 536} 537 538 539void 540CoherentXBar::forwardTiming(PacketPtr pkt, PortID exclude_slave_port_id, 541 const std::vector<QueuedSlavePort*>& dests) 542{ 543 DPRINTF(CoherentXBar, "%s for %s address %x size %d\n", __func__, 544 pkt->cmdString(), pkt->getAddr(), pkt->getSize()); 545 546 // snoops should only happen if the system isn't bypassing caches 547 assert(!system->bypassCaches()); 548 549 unsigned fanout = 0; 550 551 for (const auto& p: dests) { 552 // we could have gotten this request from a snooping master 553 // (corresponding to our own slave port that is also in 554 // snoopPorts) and should not send it back to where it came 555 // from 556 if (exclude_slave_port_id == InvalidPortID || 557 p->getId() != exclude_slave_port_id) { 558 // cache is not allowed to refuse snoop 559 p->sendTimingSnoopReq(pkt); 560 fanout++; 561 } 562 } 563 564 // Stats for fanout of this forward operation 565 snoopFanout.sample(fanout); 566} 567 568void 569CoherentXBar::recvReqRetry(PortID master_port_id) 570{ 571 // responses and snoop responses never block on forwarding them, 572 // so the retry will always be coming from a port to which we 573 // tried to forward a request 574 reqLayers[master_port_id]->recvRetry(); 575} 576 577Tick 578CoherentXBar::recvAtomic(PacketPtr pkt, PortID slave_port_id) 579{ 580 DPRINTF(CoherentXBar, "recvAtomic: packet src %s addr 0x%x cmd %s\n", 581 slavePorts[slave_port_id]->name(), pkt->getAddr(), 582 pkt->cmdString()); 583 584 unsigned int pkt_size = pkt->hasData() ? pkt->getSize() : 0; 585 unsigned int pkt_cmd = pkt->cmdToIndex(); 586 587 MemCmd snoop_response_cmd = MemCmd::InvalidCmd; 588 Tick snoop_response_latency = 0; 589 590 if (!system->bypassCaches()) { 591 // forward to all snoopers but the source 592 std::pair<MemCmd, Tick> snoop_result; 593 if (snoopFilter) { 594 // check with the snoop filter where to forward this packet 595 auto sf_res = 596 snoopFilter->lookupRequest(pkt, *slavePorts[slave_port_id]); 597 snoop_response_latency += sf_res.second * clockPeriod(); 598 DPRINTF(CoherentXBar, "%s: src %s %s 0x%x"\ 599 " SF size: %i lat: %i\n", __func__, 600 slavePorts[slave_port_id]->name(), pkt->cmdString(), 601 pkt->getAddr(), sf_res.first.size(), sf_res.second); 602 snoop_result = forwardAtomic(pkt, slave_port_id, InvalidPortID, 603 sf_res.first); 604 } else { 605 snoop_result = forwardAtomic(pkt, slave_port_id); 606 } 607 snoop_response_cmd = snoop_result.first; 608 snoop_response_latency += snoop_result.second; 609 } 610 611 // even if we had a snoop response, we must continue and also 612 // perform the actual request at the destination 613 PortID master_port_id = findPort(pkt->getAddr()); 614 615 // stats updates for the request 616 pktCount[slave_port_id][master_port_id]++; 617 pktSize[slave_port_id][master_port_id] += pkt_size; 618 transDist[pkt_cmd]++; 619 620 // forward the request to the appropriate destination 621 Tick response_latency = masterPorts[master_port_id]->sendAtomic(pkt); 622 623 // Lower levels have replied, tell the snoop filter 624 if (snoopFilter && !system->bypassCaches() && pkt->isResponse()) { 625 snoopFilter->updateResponse(pkt, *slavePorts[slave_port_id]); 626 } 627 628 // if we got a response from a snooper, restore it here 629 if (snoop_response_cmd != MemCmd::InvalidCmd) { 630 // no one else should have responded 631 assert(!pkt->isResponse()); 632 pkt->cmd = snoop_response_cmd; 633 response_latency = snoop_response_latency; 634 } 635 636 // add the response data 637 if (pkt->isResponse()) { 638 pkt_size = pkt->hasData() ? pkt->getSize() : 0; 639 pkt_cmd = pkt->cmdToIndex(); 640 641 // stats updates 642 pktCount[slave_port_id][master_port_id]++; 643 pktSize[slave_port_id][master_port_id] += pkt_size; 644 transDist[pkt_cmd]++; 645 } 646 647 // @todo: Not setting header time 648 pkt->payloadDelay = response_latency; 649 return response_latency; 650} 651 652Tick 653CoherentXBar::recvAtomicSnoop(PacketPtr pkt, PortID master_port_id) 654{ 655 DPRINTF(CoherentXBar, "recvAtomicSnoop: packet src %s addr 0x%x cmd %s\n", 656 masterPorts[master_port_id]->name(), pkt->getAddr(), 657 pkt->cmdString()); 658 659 // add the request snoop data 660 snoops++; 661 662 // forward to all snoopers 663 std::pair<MemCmd, Tick> snoop_result; 664 Tick snoop_response_latency = 0; 665 if (snoopFilter) { 666 auto sf_res = snoopFilter->lookupSnoop(pkt); 667 snoop_response_latency += sf_res.second * clockPeriod(); 668 DPRINTF(CoherentXBar, "%s: src %s %s 0x%x SF size: %i lat: %i\n", 669 __func__, masterPorts[master_port_id]->name(), pkt->cmdString(), 670 pkt->getAddr(), sf_res.first.size(), sf_res.second); 671 snoop_result = forwardAtomic(pkt, InvalidPortID, master_port_id, 672 sf_res.first); 673 } else { 674 snoop_result = forwardAtomic(pkt, InvalidPortID); 675 } 676 MemCmd snoop_response_cmd = snoop_result.first; 677 snoop_response_latency += snoop_result.second; 678 679 if (snoop_response_cmd != MemCmd::InvalidCmd) 680 pkt->cmd = snoop_response_cmd; 681 682 // add the response snoop data 683 if (pkt->isResponse()) { 684 snoops++; 685 } 686 687 // @todo: Not setting header time 688 pkt->payloadDelay = snoop_response_latency; 689 return snoop_response_latency; 690} 691 692std::pair<MemCmd, Tick> 693CoherentXBar::forwardAtomic(PacketPtr pkt, PortID exclude_slave_port_id, 694 PortID source_master_port_id, 695 const std::vector<QueuedSlavePort*>& dests) 696{ 697 // the packet may be changed on snoops, record the original 698 // command to enable us to restore it between snoops so that 699 // additional snoops can take place properly 700 MemCmd orig_cmd = pkt->cmd; 701 MemCmd snoop_response_cmd = MemCmd::InvalidCmd; 702 Tick snoop_response_latency = 0; 703 704 // snoops should only happen if the system isn't bypassing caches 705 assert(!system->bypassCaches()); 706 707 unsigned fanout = 0; 708 709 for (const auto& p: dests) { 710 // we could have gotten this request from a snooping master 711 // (corresponding to our own slave port that is also in 712 // snoopPorts) and should not send it back to where it came 713 // from 714 if (exclude_slave_port_id != InvalidPortID && 715 p->getId() == exclude_slave_port_id) 716 continue; 717 718 Tick latency = p->sendAtomicSnoop(pkt); 719 fanout++; 720 721 // in contrast to a functional access, we have to keep on 722 // going as all snoopers must be updated even if we get a 723 // response 724 if (!pkt->isResponse()) 725 continue; 726 727 // response from snoop agent 728 assert(pkt->cmd != orig_cmd); 729 assert(pkt->memInhibitAsserted()); 730 // should only happen once 731 assert(snoop_response_cmd == MemCmd::InvalidCmd); 732 // save response state 733 snoop_response_cmd = pkt->cmd; 734 snoop_response_latency = latency; 735 736 if (snoopFilter) { 737 // Handle responses by the snoopers and differentiate between 738 // responses to requests from above and snoops from below 739 if (source_master_port_id != InvalidPortID) { 740 // Getting a response for a snoop from below 741 assert(exclude_slave_port_id == InvalidPortID); 742 snoopFilter->updateSnoopForward(pkt, *p, 743 *masterPorts[source_master_port_id]); 744 } else { 745 // Getting a response for a request from above 746 assert(source_master_port_id == InvalidPortID); 747 snoopFilter->updateSnoopResponse(pkt, *p, 748 *slavePorts[exclude_slave_port_id]); 749 } 750 } 751 // restore original packet state for remaining snoopers 752 pkt->cmd = orig_cmd; 753 } 754 755 // Stats for fanout 756 snoopFanout.sample(fanout); 757 758 // the packet is restored as part of the loop and any potential 759 // snoop response is part of the returned pair 760 return std::make_pair(snoop_response_cmd, snoop_response_latency); 761} 762 763void 764CoherentXBar::recvFunctional(PacketPtr pkt, PortID slave_port_id) 765{ 766 if (!pkt->isPrint()) { 767 // don't do DPRINTFs on PrintReq as it clutters up the output 768 DPRINTF(CoherentXBar, 769 "recvFunctional: packet src %s addr 0x%x cmd %s\n", 770 slavePorts[slave_port_id]->name(), pkt->getAddr(), 771 pkt->cmdString()); 772 } 773 774 if (!system->bypassCaches()) { 775 // forward to all snoopers but the source 776 forwardFunctional(pkt, slave_port_id); 777 } 778 779 // there is no need to continue if the snooping has found what we 780 // were looking for and the packet is already a response 781 if (!pkt->isResponse()) { 782 // since our slave ports are queued ports we need to check them as well 783 for (const auto& p : slavePorts) { 784 // if we find a response that has the data, then the 785 // downstream caches/memories may be out of date, so simply stop 786 // here 787 if (p->checkFunctional(pkt)) { 788 if (pkt->needsResponse()) 789 pkt->makeResponse(); 790 return; 791 } 792 } 793 794 PortID dest_id = findPort(pkt->getAddr()); 795 796 masterPorts[dest_id]->sendFunctional(pkt); 797 } 798} 799 800void 801CoherentXBar::recvFunctionalSnoop(PacketPtr pkt, PortID master_port_id) 802{ 803 if (!pkt->isPrint()) { 804 // don't do DPRINTFs on PrintReq as it clutters up the output 805 DPRINTF(CoherentXBar, 806 "recvFunctionalSnoop: packet src %s addr 0x%x cmd %s\n", 807 masterPorts[master_port_id]->name(), pkt->getAddr(), 808 pkt->cmdString()); 809 } 810 811 // forward to all snoopers 812 forwardFunctional(pkt, InvalidPortID); 813} 814 815void 816CoherentXBar::forwardFunctional(PacketPtr pkt, PortID exclude_slave_port_id) 817{ 818 // snoops should only happen if the system isn't bypassing caches 819 assert(!system->bypassCaches()); 820 821 for (const auto& p: snoopPorts) { 822 // we could have gotten this request from a snooping master 823 // (corresponding to our own slave port that is also in 824 // snoopPorts) and should not send it back to where it came 825 // from 826 if (exclude_slave_port_id == InvalidPortID || 827 p->getId() != exclude_slave_port_id) 828 p->sendFunctionalSnoop(pkt); 829 830 // if we get a response we are done 831 if (pkt->isResponse()) { 832 break; 833 } 834 } 835} 836 837unsigned int 838CoherentXBar::drain(DrainManager *dm) 839{ 840 // sum up the individual layers 841 unsigned int total = 0; 842 for (auto l: reqLayers) 843 total += l->drain(dm); 844 for (auto l: respLayers) 845 total += l->drain(dm); 846 for (auto l: snoopLayers) 847 total += l->drain(dm); 848 return total; 849} 850 851void 852CoherentXBar::regStats() 853{ 854 // register the stats of the base class and our layers 855 BaseXBar::regStats(); 856 for (auto l: reqLayers) 857 l->regStats(); 858 for (auto l: respLayers) 859 l->regStats(); 860 for (auto l: snoopLayers) 861 l->regStats(); 862 863 snoops 864 .name(name() + ".snoops") 865 .desc("Total snoops (count)") 866 ; 867 868 snoopFanout 869 .init(0, snoopPorts.size(), 1) 870 .name(name() + ".snoop_fanout") 871 .desc("Request fanout histogram") 872 ; 873} 874 875CoherentXBar * 876CoherentXBarParams::create() 877{ 878 return new CoherentXBar(this); 879} 880