pl111.cc revision 11359 
1/*
2 * Copyright (c) 2010-2012, 2015 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder.  You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Redistribution and use in source and binary forms, with or without
15 * modification, are permitted provided that the following conditions are
16 * met: redistributions of source code must retain the above copyright
17 * notice, this list of conditions and the following disclaimer;
18 * redistributions in binary form must reproduce the above copyright
19 * notice, this list of conditions and the following disclaimer in the
20 * documentation and/or other materials provided with the distribution;
21 * neither the name of the copyright holders nor the names of its
22 * contributors may be used to endorse or promote products derived from
23 * this software without specific prior written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
26 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
27 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
28 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
29 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
30 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
31 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
32 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
33 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
34 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
35 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 *
37 * Authors: William Wang
38 *          Ali Saidi
39 */
40
41#include "base/vnc/vncinput.hh"
42#include "base/output.hh"
43#include "base/trace.hh"
44#include "debug/PL111.hh"
45#include "debug/Uart.hh"
46#include "dev/arm/amba_device.hh"
47#include "dev/arm/base_gic.hh"
48#include "dev/arm/pl111.hh"
49#include "mem/packet.hh"
50#include "mem/packet_access.hh"
51#include "sim/system.hh"
52
53// clang complains about std::set being overloaded with Packet::set if
54// we open up the entire namespace std
55using std::vector;
56
57// initialize clcd registers
58Pl111::Pl111(const Params *p)
59    : AmbaDmaDevice(p), lcdTiming0(0), lcdTiming1(0), lcdTiming2(0),
60      lcdTiming3(0), lcdUpbase(0), lcdLpbase(0), lcdControl(0), lcdImsc(0),
61      lcdRis(0), lcdMis(0),
62      clcdCrsrCtrl(0), clcdCrsrConfig(0), clcdCrsrPalette0(0),
63      clcdCrsrPalette1(0), clcdCrsrXY(0), clcdCrsrClip(0), clcdCrsrImsc(0),
64      clcdCrsrIcr(0), clcdCrsrRis(0), clcdCrsrMis(0),
65      pixelClock(p->pixel_clock),
66      converter(PixelConverter::rgba8888_le), fb(LcdMaxWidth, LcdMaxHeight),
67      vnc(p->vnc), bmp(&fb), pic(NULL),
68      width(LcdMaxWidth), height(LcdMaxHeight),
69      bytesPerPixel(4), startTime(0), startAddr(0), maxAddr(0), curAddr(0),
70      waterMark(0), dmaPendingNum(0), readEvent(this), fillFifoEvent(this),
71      dmaDoneEventAll(maxOutstandingDma, this),
72      dmaDoneEventFree(maxOutstandingDma),
73      intEvent(this), enableCapture(p->enable_capture)
74{
75    pioSize = 0xFFFF;
76
77    dmaBuffer = new uint8_t[buffer_size];
78
79    memset(lcdPalette, 0, sizeof(lcdPalette));
80    memset(cursorImage, 0, sizeof(cursorImage));
81    memset(dmaBuffer, 0, buffer_size);
82
83    for (int i = 0; i < maxOutstandingDma; ++i)
84        dmaDoneEventFree[i] = &dmaDoneEventAll[i];
85
86    if (vnc)
87        vnc->setFrameBuffer(&fb);
88}
89
90Pl111::~Pl111()
91{
92    delete[] dmaBuffer;
93}
94
95// read registers and frame buffer
96Tick
97Pl111::read(PacketPtr pkt)
98{
99    // use a temporary data since the LCD registers are read/written with
100    // different size operations
101
102    uint32_t data = 0;
103
104    assert(pkt->getAddr() >= pioAddr &&
105           pkt->getAddr() < pioAddr + pioSize);
106
107    Addr daddr = pkt->getAddr() - pioAddr;
108
109    DPRINTF(PL111, " read register %#x size=%d\n", daddr, pkt->getSize());
110
111    switch (daddr) {
112      case LcdTiming0:
113        data = lcdTiming0;
114        break;
115      case LcdTiming1:
116        data = lcdTiming1;
117        break;
118      case LcdTiming2:
119        data = lcdTiming2;
120        break;
121      case LcdTiming3:
122        data = lcdTiming3;
123        break;
124      case LcdUpBase:
125        data = lcdUpbase;
126        break;
127      case LcdLpBase:
128        data = lcdLpbase;
129        break;
130      case LcdControl:
131        data = lcdControl;
132        break;
133      case LcdImsc:
134        data = lcdImsc;
135        break;
136      case LcdRis:
137        data = lcdRis;
138        break;
139      case LcdMis:
140        data = lcdMis;
141        break;
142      case LcdIcr:
143        panic("LCD register at offset %#x is Write-Only\n", daddr);
144        break;
145      case LcdUpCurr:
146        data = curAddr;
147        break;
148      case LcdLpCurr:
149        data = curAddr;
150        break;
151      case ClcdCrsrCtrl:
152        data = clcdCrsrCtrl;
153        break;
154      case ClcdCrsrConfig:
155        data = clcdCrsrConfig;
156        break;
157      case ClcdCrsrPalette0:
158        data = clcdCrsrPalette0;
159        break;
160      case ClcdCrsrPalette1:
161        data = clcdCrsrPalette1;
162        break;
163      case ClcdCrsrXY:
164        data = clcdCrsrXY;
165        break;
166      case ClcdCrsrClip:
167        data = clcdCrsrClip;
168        break;
169      case ClcdCrsrImsc:
170        data = clcdCrsrImsc;
171        break;
172      case ClcdCrsrIcr:
173        panic("CLCD register at offset %#x is Write-Only\n", daddr);
174        break;
175      case ClcdCrsrRis:
176        data = clcdCrsrRis;
177        break;
178      case ClcdCrsrMis:
179        data = clcdCrsrMis;
180        break;
181      default:
182        if (readId(pkt, AMBA_ID, pioAddr)) {
183            // Hack for variable size accesses
184            data = pkt->get<uint32_t>();
185            break;
186        } else if (daddr >= CrsrImage && daddr <= 0xBFC) {
187            // CURSOR IMAGE
188            int index;
189            index = (daddr - CrsrImage) >> 2;
190            data= cursorImage[index];
191            break;
192        } else if (daddr >= LcdPalette && daddr <= 0x3FC) {
193            // LCD Palette
194            int index;
195            index = (daddr - LcdPalette) >> 2;
196            data = lcdPalette[index];
197            break;
198        } else {
199            panic("Tried to read CLCD register at offset %#x that "
200                       "doesn't exist\n", daddr);
201            break;
202        }
203    }
204
205    switch(pkt->getSize()) {
206      case 1:
207        pkt->set<uint8_t>(data);
208        break;
209      case 2:
210        pkt->set<uint16_t>(data);
211        break;
212      case 4:
213        pkt->set<uint32_t>(data);
214        break;
215      default:
216        panic("CLCD controller read size too big?\n");
217        break;
218    }
219
220    pkt->makeAtomicResponse();
221    return pioDelay;
222}
223
224// write registers and frame buffer
225Tick
226Pl111::write(PacketPtr pkt)
227{
228    // use a temporary data since the LCD registers are read/written with
229    // different size operations
230    //
231    uint32_t data = 0;
232
233    switch(pkt->getSize()) {
234      case 1:
235        data = pkt->get<uint8_t>();
236        break;
237      case 2:
238        data = pkt->get<uint16_t>();
239        break;
240      case 4:
241        data = pkt->get<uint32_t>();
242        break;
243      default:
244        panic("PL111 CLCD controller write size too big?\n");
245        break;
246    }
247
248    assert(pkt->getAddr() >= pioAddr &&
249           pkt->getAddr() < pioAddr + pioSize);
250
251    Addr daddr = pkt->getAddr() - pioAddr;
252
253    DPRINTF(PL111, " write register %#x value %#x size=%d\n", daddr,
254            pkt->get<uint8_t>(), pkt->getSize());
255
256    switch (daddr) {
257      case LcdTiming0:
258        lcdTiming0 = data;
259        // width = 16 * (PPL+1)
260        width = (lcdTiming0.ppl + 1) << 4;
261        break;
262      case LcdTiming1:
263        lcdTiming1 = data;
264        // height = LPP + 1
265        height = (lcdTiming1.lpp) + 1;
266        break;
267      case LcdTiming2:
268        lcdTiming2 = data;
269        break;
270      case LcdTiming3:
271        lcdTiming3 = data;
272        break;
273      case LcdUpBase:
274        lcdUpbase = data;
275        DPRINTF(PL111, "####### Upper panel base set to: %#x #######\n", lcdUpbase);
276        break;
277      case LcdLpBase:
278        warn_once("LCD dual screen mode not supported\n");
279        lcdLpbase = data;
280        DPRINTF(PL111, "###### Lower panel base set to: %#x #######\n", lcdLpbase);
281        break;
282      case LcdControl:
283        int old_lcdpwr;
284        old_lcdpwr = lcdControl.lcdpwr;
285        lcdControl = data;
286
287        DPRINTF(PL111, "LCD power is:%d\n", lcdControl.lcdpwr);
288
289        // LCD power enable
290        if (lcdControl.lcdpwr && !old_lcdpwr) {
291            updateVideoParams();
292            DPRINTF(PL111, " lcd size: height %d width %d\n", height, width);
293            waterMark = lcdControl.watermark ? 8 : 4;
294            startDma();
295        }
296        break;
297      case LcdImsc:
298        lcdImsc = data;
299        if (lcdImsc.vcomp)
300            panic("Interrupting on vcomp not supported\n");
301
302        lcdMis = lcdImsc & lcdRis;
303
304        if (!lcdMis)
305            gic->clearInt(intNum);
306
307         break;
308      case LcdRis:
309        panic("LCD register at offset %#x is Read-Only\n", daddr);
310        break;
311      case LcdMis:
312        panic("LCD register at offset %#x is Read-Only\n", daddr);
313        break;
314      case LcdIcr:
315        lcdRis = lcdRis & ~data;
316        lcdMis = lcdImsc & lcdRis;
317
318        if (!lcdMis)
319            gic->clearInt(intNum);
320
321        break;
322      case LcdUpCurr:
323        panic("LCD register at offset %#x is Read-Only\n", daddr);
324        break;
325      case LcdLpCurr:
326        panic("LCD register at offset %#x is Read-Only\n", daddr);
327        break;
328      case ClcdCrsrCtrl:
329        clcdCrsrCtrl = data;
330        break;
331      case ClcdCrsrConfig:
332        clcdCrsrConfig = data;
333        break;
334      case ClcdCrsrPalette0:
335        clcdCrsrPalette0 = data;
336        break;
337      case ClcdCrsrPalette1:
338        clcdCrsrPalette1 = data;
339        break;
340      case ClcdCrsrXY:
341        clcdCrsrXY = data;
342        break;
343      case ClcdCrsrClip:
344        clcdCrsrClip = data;
345        break;
346      case ClcdCrsrImsc:
347        clcdCrsrImsc = data;
348        break;
349      case ClcdCrsrIcr:
350        clcdCrsrIcr = data;
351        break;
352      case ClcdCrsrRis:
353        panic("CLCD register at offset %#x is Read-Only\n", daddr);
354        break;
355      case ClcdCrsrMis:
356        panic("CLCD register at offset %#x is Read-Only\n", daddr);
357        break;
358      default:
359        if (daddr >= CrsrImage && daddr <= 0xBFC) {
360            // CURSOR IMAGE
361            int index;
362            index = (daddr - CrsrImage) >> 2;
363            cursorImage[index] = data;
364            break;
365        } else if (daddr >= LcdPalette && daddr <= 0x3FC) {
366            // LCD Palette
367            int index;
368            index = (daddr - LcdPalette) >> 2;
369            lcdPalette[index] = data;
370            break;
371        } else {
372            panic("Tried to write PL111 register at offset %#x that "
373                       "doesn't exist\n", daddr);
374            break;
375        }
376    }
377
378    pkt->makeAtomicResponse();
379    return pioDelay;
380}
381
382PixelConverter
383Pl111::pixelConverter() const
384{
385    unsigned rw, gw, bw;
386    unsigned offsets[3];
387
388    switch (lcdControl.lcdbpp) {
389      case bpp24:
390        rw = gw = bw = 8;
391        offsets[0] = 0;
392        offsets[1] = 8;
393        offsets[2] = 16;
394        break;
395
396      case bpp16m565:
397        rw = 5;
398        gw = 6;
399        bw = 5;
400        offsets[0] = 0;
401        offsets[1] = 5;
402        offsets[2] = 11;
403        break;
404
405      default:
406        panic("Unimplemented video mode\n");
407    }
408
409    if (lcdControl.bgr) {
410        return PixelConverter(
411            bytesPerPixel,
412            offsets[2], offsets[1], offsets[0],
413            rw, gw, bw,
414            LittleEndianByteOrder);
415    } else {
416        return PixelConverter(
417            bytesPerPixel,
418            offsets[0], offsets[1], offsets[2],
419            rw, gw, bw,
420            LittleEndianByteOrder);
421    }
422}
423
424void
425Pl111::updateVideoParams()
426{
427    if (lcdControl.lcdbpp == bpp24) {
428        bytesPerPixel = 4;
429    } else if (lcdControl.lcdbpp == bpp16m565) {
430        bytesPerPixel = 2;
431    }
432
433    fb.resize(width, height);
434    converter = pixelConverter();
435
436    // Workaround configuration bugs where multiple display
437    // controllers are attached to the same VNC server by reattaching
438    // enabled devices. This isn't ideal, but works as long as only
439    // one display controller is active at a time.
440    if (lcdControl.lcdpwr && vnc)
441        vnc->setFrameBuffer(&fb);
442}
443
444void
445Pl111::startDma()
446{
447    if (dmaPendingNum != 0 || readEvent.scheduled())
448        return;
449    readFramebuffer();
450}
451
452void
453Pl111::readFramebuffer()
454{
455    // initialization for dma read from frame buffer to dma buffer
456    uint32_t length = height * width;
457    if (startAddr != lcdUpbase)
458        startAddr = lcdUpbase;
459
460    // Updating base address, interrupt if we're supposed to
461    lcdRis.baseaddr = 1;
462    if (!intEvent.scheduled())
463        schedule(intEvent, clockEdge());
464
465    curAddr = 0;
466    startTime = curTick();
467
468    maxAddr = static_cast<Addr>(length * bytesPerPixel);
469
470    DPRINTF(PL111, " lcd frame buffer size of %d bytes \n", maxAddr);
471
472    fillFifo();
473}
474
475void
476Pl111::fillFifo()
477{
478    while ((dmaPendingNum < maxOutstandingDma) && (maxAddr >= curAddr + dmaSize )) {
479        // concurrent dma reads need different dma done events
480        // due to assertion in scheduling state
481        ++dmaPendingNum;
482
483        assert(!dmaDoneEventFree.empty());
484        DmaDoneEvent *event(dmaDoneEventFree.back());
485        dmaDoneEventFree.pop_back();
486        assert(!event->scheduled());
487
488        // We use a uncachable request here because the requests from the CPU
489        // will be uncacheable as well. If we have uncacheable and cacheable
490        // requests in the memory system for the same address it won't be
491        // pleased
492        dmaPort.dmaAction(MemCmd::ReadReq, curAddr + startAddr, dmaSize,
493                          event, curAddr + dmaBuffer,
494                          0, Request::UNCACHEABLE);
495        curAddr += dmaSize;
496    }
497}
498
499void
500Pl111::dmaDone()
501{
502    DPRINTF(PL111, "DMA Done\n");
503
504    Tick maxFrameTime = lcdTiming2.cpl * height * pixelClock;
505
506    --dmaPendingNum;
507
508    if (maxAddr == curAddr && !dmaPendingNum) {
509        if ((curTick() - startTime) > maxFrameTime) {
510            warn("CLCD controller buffer underrun, took %d ticks when should"
511                 " have taken %d\n", curTick() - startTime, maxFrameTime);
512            lcdRis.underflow = 1;
513            if (!intEvent.scheduled())
514                schedule(intEvent, clockEdge());
515        }
516
517        assert(!readEvent.scheduled());
518        fb.copyIn(dmaBuffer, converter);
519        if (vnc)
520            vnc->setDirty();
521
522        if (enableCapture) {
523            DPRINTF(PL111, "-- write out frame buffer into bmp\n");
524
525            if (!pic)
526                pic = simout.create(csprintf("%s.framebuffer.bmp", sys->name()),
527                                    true);
528
529            assert(pic);
530            pic->stream()->seekp(0);
531            bmp.write(*pic->stream());
532        }
533
534        // schedule the next read based on when the last frame started
535        // and the desired fps (i.e. maxFrameTime), we turn the
536        // argument into a relative number of cycles in the future
537        if (lcdControl.lcden)
538            schedule(readEvent, clockEdge(ticksToCycles(startTime -
539                                                        curTick() +
540                                                        maxFrameTime)));
541    }
542
543    if (dmaPendingNum > (maxOutstandingDma - waterMark))
544        return;
545
546    if (!fillFifoEvent.scheduled())
547        schedule(fillFifoEvent, clockEdge());
548}
549
550void
551Pl111::serialize(CheckpointOut &cp) const
552{
553    DPRINTF(PL111, "Serializing ARM PL111\n");
554
555    uint32_t lcdTiming0_serial = lcdTiming0;
556    SERIALIZE_SCALAR(lcdTiming0_serial);
557
558    uint32_t lcdTiming1_serial = lcdTiming1;
559    SERIALIZE_SCALAR(lcdTiming1_serial);
560
561    uint32_t lcdTiming2_serial = lcdTiming2;
562    SERIALIZE_SCALAR(lcdTiming2_serial);
563
564    uint32_t lcdTiming3_serial = lcdTiming3;
565    SERIALIZE_SCALAR(lcdTiming3_serial);
566
567    SERIALIZE_SCALAR(lcdUpbase);
568    SERIALIZE_SCALAR(lcdLpbase);
569
570    uint32_t lcdControl_serial = lcdControl;
571    SERIALIZE_SCALAR(lcdControl_serial);
572
573    uint8_t lcdImsc_serial = lcdImsc;
574    SERIALIZE_SCALAR(lcdImsc_serial);
575
576    uint8_t lcdRis_serial = lcdRis;
577    SERIALIZE_SCALAR(lcdRis_serial);
578
579    uint8_t lcdMis_serial = lcdMis;
580    SERIALIZE_SCALAR(lcdMis_serial);
581
582    SERIALIZE_ARRAY(lcdPalette, LcdPaletteSize);
583    SERIALIZE_ARRAY(cursorImage, CrsrImageSize);
584
585    SERIALIZE_SCALAR(clcdCrsrCtrl);
586    SERIALIZE_SCALAR(clcdCrsrConfig);
587    SERIALIZE_SCALAR(clcdCrsrPalette0);
588    SERIALIZE_SCALAR(clcdCrsrPalette1);
589    SERIALIZE_SCALAR(clcdCrsrXY);
590    SERIALIZE_SCALAR(clcdCrsrClip);
591
592    uint8_t clcdCrsrImsc_serial = clcdCrsrImsc;
593    SERIALIZE_SCALAR(clcdCrsrImsc_serial);
594
595    uint8_t clcdCrsrIcr_serial = clcdCrsrIcr;
596    SERIALIZE_SCALAR(clcdCrsrIcr_serial);
597
598    uint8_t clcdCrsrRis_serial = clcdCrsrRis;
599    SERIALIZE_SCALAR(clcdCrsrRis_serial);
600
601    uint8_t clcdCrsrMis_serial = clcdCrsrMis;
602    SERIALIZE_SCALAR(clcdCrsrMis_serial);
603
604    SERIALIZE_SCALAR(height);
605    SERIALIZE_SCALAR(width);
606    SERIALIZE_SCALAR(bytesPerPixel);
607
608    SERIALIZE_ARRAY(dmaBuffer, buffer_size);
609    SERIALIZE_SCALAR(startTime);
610    SERIALIZE_SCALAR(startAddr);
611    SERIALIZE_SCALAR(maxAddr);
612    SERIALIZE_SCALAR(curAddr);
613    SERIALIZE_SCALAR(waterMark);
614    SERIALIZE_SCALAR(dmaPendingNum);
615
616    Tick int_event_time = 0;
617    Tick read_event_time = 0;
618    Tick fill_fifo_event_time = 0;
619
620    if (readEvent.scheduled())
621        read_event_time = readEvent.when();
622    if (fillFifoEvent.scheduled())
623        fill_fifo_event_time = fillFifoEvent.when();
624    if (intEvent.scheduled())
625        int_event_time = intEvent.when();
626
627    SERIALIZE_SCALAR(read_event_time);
628    SERIALIZE_SCALAR(fill_fifo_event_time);
629    SERIALIZE_SCALAR(int_event_time);
630
631    vector<Tick> dma_done_event_tick;
632    dma_done_event_tick.resize(maxOutstandingDma);
633    for (int x = 0; x < maxOutstandingDma; x++) {
634        dma_done_event_tick[x] = dmaDoneEventAll[x].scheduled() ?
635            dmaDoneEventAll[x].when() : 0;
636    }
637    SERIALIZE_CONTAINER(dma_done_event_tick);
638}
639
640void
641Pl111::unserialize(CheckpointIn &cp)
642{
643    DPRINTF(PL111, "Unserializing ARM PL111\n");
644
645    uint32_t lcdTiming0_serial;
646    UNSERIALIZE_SCALAR(lcdTiming0_serial);
647    lcdTiming0 = lcdTiming0_serial;
648
649    uint32_t lcdTiming1_serial;
650    UNSERIALIZE_SCALAR(lcdTiming1_serial);
651    lcdTiming1 = lcdTiming1_serial;
652
653    uint32_t lcdTiming2_serial;
654    UNSERIALIZE_SCALAR(lcdTiming2_serial);
655    lcdTiming2 = lcdTiming2_serial;
656
657    uint32_t lcdTiming3_serial;
658    UNSERIALIZE_SCALAR(lcdTiming3_serial);
659    lcdTiming3 = lcdTiming3_serial;
660
661    UNSERIALIZE_SCALAR(lcdUpbase);
662    UNSERIALIZE_SCALAR(lcdLpbase);
663
664    uint32_t lcdControl_serial;
665    UNSERIALIZE_SCALAR(lcdControl_serial);
666    lcdControl = lcdControl_serial;
667
668    uint8_t lcdImsc_serial;
669    UNSERIALIZE_SCALAR(lcdImsc_serial);
670    lcdImsc = lcdImsc_serial;
671
672    uint8_t lcdRis_serial;
673    UNSERIALIZE_SCALAR(lcdRis_serial);
674    lcdRis = lcdRis_serial;
675
676    uint8_t lcdMis_serial;
677    UNSERIALIZE_SCALAR(lcdMis_serial);
678    lcdMis = lcdMis_serial;
679
680    UNSERIALIZE_ARRAY(lcdPalette, LcdPaletteSize);
681    UNSERIALIZE_ARRAY(cursorImage, CrsrImageSize);
682
683    UNSERIALIZE_SCALAR(clcdCrsrCtrl);
684    UNSERIALIZE_SCALAR(clcdCrsrConfig);
685    UNSERIALIZE_SCALAR(clcdCrsrPalette0);
686    UNSERIALIZE_SCALAR(clcdCrsrPalette1);
687    UNSERIALIZE_SCALAR(clcdCrsrXY);
688    UNSERIALIZE_SCALAR(clcdCrsrClip);
689
690    uint8_t clcdCrsrImsc_serial;
691    UNSERIALIZE_SCALAR(clcdCrsrImsc_serial);
692    clcdCrsrImsc = clcdCrsrImsc_serial;
693
694    uint8_t clcdCrsrIcr_serial;
695    UNSERIALIZE_SCALAR(clcdCrsrIcr_serial);
696    clcdCrsrIcr = clcdCrsrIcr_serial;
697
698    uint8_t clcdCrsrRis_serial;
699    UNSERIALIZE_SCALAR(clcdCrsrRis_serial);
700    clcdCrsrRis = clcdCrsrRis_serial;
701
702    uint8_t clcdCrsrMis_serial;
703    UNSERIALIZE_SCALAR(clcdCrsrMis_serial);
704    clcdCrsrMis = clcdCrsrMis_serial;
705
706    UNSERIALIZE_SCALAR(height);
707    UNSERIALIZE_SCALAR(width);
708    UNSERIALIZE_SCALAR(bytesPerPixel);
709
710    UNSERIALIZE_ARRAY(dmaBuffer, buffer_size);
711    UNSERIALIZE_SCALAR(startTime);
712    UNSERIALIZE_SCALAR(startAddr);
713    UNSERIALIZE_SCALAR(maxAddr);
714    UNSERIALIZE_SCALAR(curAddr);
715    UNSERIALIZE_SCALAR(waterMark);
716    UNSERIALIZE_SCALAR(dmaPendingNum);
717
718    Tick int_event_time = 0;
719    Tick read_event_time = 0;
720    Tick fill_fifo_event_time = 0;
721
722    UNSERIALIZE_SCALAR(read_event_time);
723    UNSERIALIZE_SCALAR(fill_fifo_event_time);
724    UNSERIALIZE_SCALAR(int_event_time);
725
726    if (int_event_time)
727        schedule(intEvent, int_event_time);
728    if (read_event_time)
729        schedule(readEvent, read_event_time);
730    if (fill_fifo_event_time)
731        schedule(fillFifoEvent, fill_fifo_event_time);
732
733    vector<Tick> dma_done_event_tick;
734    dma_done_event_tick.resize(maxOutstandingDma);
735    UNSERIALIZE_CONTAINER(dma_done_event_tick);
736    dmaDoneEventFree.clear();
737    for (int x = 0; x < maxOutstandingDma; x++) {
738        if (dma_done_event_tick[x])
739            schedule(dmaDoneEventAll[x], dma_done_event_tick[x]);
740        else
741            dmaDoneEventFree.push_back(&dmaDoneEventAll[x]);
742    }
743    assert(maxOutstandingDma - dmaDoneEventFree.size() == dmaPendingNum);
744
745    if (lcdControl.lcdpwr) {
746        updateVideoParams();
747        fb.copyIn(dmaBuffer, converter);
748        if (vnc)
749            vnc->setDirty();
750    }
751}
752
753void
754Pl111::generateInterrupt()
755{
756    DPRINTF(PL111, "Generate Interrupt: lcdImsc=0x%x lcdRis=0x%x lcdMis=0x%x\n",
757            (uint32_t)lcdImsc, (uint32_t)lcdRis, (uint32_t)lcdMis);
758    lcdMis = lcdImsc & lcdRis;
759
760    if (lcdMis.underflow || lcdMis.baseaddr || lcdMis.vcomp || lcdMis.ahbmaster) {
761        gic->sendInt(intNum);
762        DPRINTF(PL111, " -- Generated\n");
763    }
764}
765
766AddrRangeList
767Pl111::getAddrRanges() const
768{
769    AddrRangeList ranges;
770    ranges.push_back(RangeSize(pioAddr, pioSize));
771    return ranges;
772}
773
774Pl111 *
775Pl111Params::create()
776{
777    return new Pl111(this);
778}
779
780
781