RealView.py revision 7950
1# Copyright (c) 2009 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2007 The Regents of The University of Michigan
14# All rights reserved.
15#
16# Redistribution and use in source and binary forms, with or without
17# modification, are permitted provided that the following conditions are
18# met: redistributions of source code must retain the above copyright
19# notice, this list of conditions and the following disclaimer;
20# redistributions in binary form must reproduce the above copyright
21# notice, this list of conditions and the following disclaimer in the
22# documentation and/or other materials provided with the distribution;
23# neither the name of the copyright holders nor the names of its
24# contributors may be used to endorse or promote products derived from
25# this software without specific prior written permission.
26#
27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38#
39# Authors: Ali Saidi
40#          Gabe Black
41#          William Wang
42
43from m5.params import *
44from m5.proxy import *
45from Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice
46from Platform import Platform
47from Terminal import Terminal
48from Uart import Uart
49
50class AmbaDevice(BasicPioDevice):
51    type = 'AmbaDevice'
52    abstract = True
53    amba_id = Param.UInt32("ID of AMBA device for kernel detection")
54
55class AmbaIntDevice(AmbaDevice):
56    type = 'AmbaIntDevice'
57    abstract = True
58    gic = Param.Gic(Parent.any, "Gic to use for interrupting")
59    int_num = Param.UInt32("Interrupt number that connects to GIC")
60    int_delay = Param.Latency("100ns",
61            "Time between action and interrupt generation by device")
62
63class AmbaDmaDevice(DmaDevice):
64    type = 'AmbaDmaDevice'
65    abstract = True
66    pio_addr = Param.Addr("Address for AMBA slave interface")
67    pio_latency = Param.Latency("10ns", "Time between action and write/read result by AMBA DMA Device")
68    gic = Param.Gic(Parent.any, "Gic to use for interrupting")
69    int_num = Param.UInt32("Interrupt number that connects to GIC")
70    amba_id = Param.UInt32("ID of AMBA device for kernel detection")
71
72class RealViewCtrl(BasicPioDevice):
73    type = 'RealViewCtrl'
74    proc_id = Param.UInt32(0x0C000000, "Platform ID")
75
76class Gic(PioDevice):
77    type = 'Gic'
78    dist_addr = Param.Addr(0x1f001000, "Address for distributor")
79    cpu_addr = Param.Addr(0x1f000100, "Address for cpu")
80    dist_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to distributor")
81    cpu_pio_delay = Param.Latency('10ns', "Delay for PIO r/w to cpu")
82    it_lines = Param.UInt32(128, "Number of interrupt lines supported (max = 1020)")
83
84class AmbaFake(AmbaDevice):
85    type = 'AmbaFake'
86    ignore_access = Param.Bool(False, "Ignore reads/writes to this device, (e.g. IsaFake + AMBA)")
87    amba_id = 0;
88
89class Pl011(Uart):
90    type = 'Pl011'
91    gic = Param.Gic(Parent.any, "Gic to use for interrupting")
92    int_num = Param.UInt32("Interrupt number that connects to GIC")
93    end_on_eot = Param.Bool(False, "End the simulation when a EOT is received on the UART")
94    int_delay = Param.Latency("100ns", "Time between action and interrupt generation by UART")
95
96class Sp804(AmbaDevice):
97    type = 'Sp804'
98    gic = Param.Gic(Parent.any, "Gic to use for interrupting")
99    int_num0 = Param.UInt32("Interrupt number that connects to GIC")
100    clock0 = Param.Clock('1MHz', "Clock speed of the input")
101    int_num1 = Param.UInt32("Interrupt number that connects to GIC")
102    clock1 = Param.Clock('1MHz', "Clock speed of the input")
103    amba_id = 0x00141804
104
105class Pl050(AmbaIntDevice):
106    type = 'Pl050'
107    vnc = Param.VncServer(Parent.any, "Vnc server for remote frame buffer display")
108    is_mouse = Param.Bool(False, "Is this interface a mouse, if not a keyboard")
109    int_delay = '1us'
110    amba_id = 0x00141050
111
112class Pl111(AmbaDmaDevice):
113    type = 'Pl111'
114    clock = Param.Clock('24MHz', "Clock speed of the input")
115    vnc   = Param.VncServer(Parent.any, "Vnc server for remote frame buffer display")
116    amba_id = 0x00141111
117
118class RealView(Platform):
119    type = 'RealView'
120    system = Param.System(Parent.any, "system")
121
122# Reference for memory map and interrupt number
123# RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A)
124# Chapter 4: Programmer's Reference
125class RealViewPBX(RealView):
126    uart = Pl011(pio_addr=0x10009000, int_num=44)
127    realview_io = RealViewCtrl(pio_addr=0x10000000)
128    gic = Gic()
129    timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000)
130    timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000)
131    clcd = Pl111(pio_addr=0x10020000, int_num=55)
132    kmi0   = Pl050(pio_addr=0x10006000, int_num=52)
133    kmi1   = Pl050(pio_addr=0x10007000, int_num=53, is_mouse=True)
134
135    l2x0_fake     = IsaFake(pio_addr=0x1f002000, pio_size=0xfff)
136    flash_fake    = IsaFake(pio_addr=0x40000000, pio_size=0x4000000)
137    dmac_fake     = AmbaFake(pio_addr=0x10030000)
138    uart1_fake    = AmbaFake(pio_addr=0x1000a000)
139    uart2_fake    = AmbaFake(pio_addr=0x1000b000)
140    uart3_fake    = AmbaFake(pio_addr=0x1000c000)
141    smc_fake      = AmbaFake(pio_addr=0x100e1000)
142    sp810_fake    = AmbaFake(pio_addr=0x10001000, ignore_access=True)
143    watchdog_fake = AmbaFake(pio_addr=0x10010000)
144    gpio0_fake    = AmbaFake(pio_addr=0x10013000)
145    gpio1_fake    = AmbaFake(pio_addr=0x10014000)
146    gpio2_fake    = AmbaFake(pio_addr=0x10015000)
147    ssp_fake      = AmbaFake(pio_addr=0x1000d000)
148    sci_fake      = AmbaFake(pio_addr=0x1000e000)
149    aaci_fake     = AmbaFake(pio_addr=0x10004000)
150    mmc_fake      = AmbaFake(pio_addr=0x10005000)
151    rtc_fake      = AmbaFake(pio_addr=0x10017000, amba_id=0x41031)
152    cf0_fake      = IsaFake(pio_addr=0x18000000, pio_size=0xfff)
153
154
155    # Attach I/O devices that are on chip
156    def attachOnChipIO(self, bus):
157       self.gic.pio = bus.port
158       self.l2x0_fake.pio = bus.port
159
160    # Attach I/O devices to specified bus object.  Can't do this
161    # earlier, since the bus object itself is typically defined at the
162    # System level.
163    def attachIO(self, bus):
164       self.uart.pio          = bus.port
165       self.realview_io.pio   = bus.port
166       self.timer0.pio        = bus.port
167       self.timer1.pio        = bus.port
168       self.clcd.pio          = bus.port
169       self.kmi0.pio          = bus.port
170       self.kmi1.pio          = bus.port
171       self.dmac_fake.pio     = bus.port
172       self.uart1_fake.pio    = bus.port
173       self.uart2_fake.pio    = bus.port
174       self.uart3_fake.pio    = bus.port
175       self.smc_fake.pio      = bus.port
176       self.sp810_fake.pio    = bus.port
177       self.watchdog_fake.pio = bus.port
178       self.gpio0_fake.pio    = bus.port
179       self.gpio1_fake.pio    = bus.port
180       self.gpio2_fake.pio    = bus.port
181       self.ssp_fake.pio      = bus.port
182       self.sci_fake.pio      = bus.port
183       self.aaci_fake.pio     = bus.port
184       self.mmc_fake.pio      = bus.port
185       self.rtc_fake.pio      = bus.port
186       self.flash_fake.pio    = bus.port
187       self.cf0_fake.pio      = bus.port
188
189# Reference for memory map and interrupt number
190# RealView Emulation Baseboard User Guide (ARM DUI 0143B)
191# Chapter 4: Programmer's Reference
192class RealViewEB(RealView):
193    uart = Pl011(pio_addr=0x10009000, int_num=44)
194    realview_io = RealViewCtrl(pio_addr=0x10000000)
195    gic = Gic(dist_addr=0x10041000, cpu_addr=0x10040000)
196    timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000)
197    timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000)
198    clcd   = Pl111(pio_addr=0x10020000, int_num=23)
199    kmi0   = Pl050(pio_addr=0x10006000, int_num=20)
200    kmi1   = Pl050(pio_addr=0x10007000, int_num=21, is_mouse=True)
201
202    l2x0_fake     = IsaFake(pio_addr=0x1f002000, pio_size=0xfff, warn_access="1")
203    dmac_fake     = AmbaFake(pio_addr=0x10030000)
204    uart1_fake    = AmbaFake(pio_addr=0x1000a000)
205    uart2_fake    = AmbaFake(pio_addr=0x1000b000)
206    uart3_fake    = AmbaFake(pio_addr=0x1000c000)
207    smc_fake      = AmbaFake(pio_addr=0x100e1000)
208    sp810_fake    = AmbaFake(pio_addr=0x10001000, ignore_access=True)
209    watchdog_fake = AmbaFake(pio_addr=0x10010000)
210    gpio0_fake    = AmbaFake(pio_addr=0x10013000)
211    gpio1_fake    = AmbaFake(pio_addr=0x10014000)
212    gpio2_fake    = AmbaFake(pio_addr=0x10015000)
213    ssp_fake      = AmbaFake(pio_addr=0x1000d000)
214    sci_fake      = AmbaFake(pio_addr=0x1000e000)
215    aaci_fake     = AmbaFake(pio_addr=0x10004000)
216    mmc_fake      = AmbaFake(pio_addr=0x10005000)
217    rtc_fake      = AmbaFake(pio_addr=0x10017000, amba_id=0x41031)
218
219
220
221    # Attach I/O devices that are on chip
222    def attachOnChipIO(self, bus):
223       self.gic.pio = bus.port
224       self.l2x0_fake.pio = bus.port
225
226    # Attach I/O devices to specified bus object.  Can't do this
227    # earlier, since the bus object itself is typically defined at the
228    # System level.
229    def attachIO(self, bus):
230       self.uart.pio          = bus.port
231       self.realview_io.pio   = bus.port
232       self.timer0.pio        = bus.port
233       self.timer1.pio        = bus.port
234       self.clcd.pio          = bus.port
235       self.kmi0.pio          = bus.port
236       self.kmi1.pio          = bus.port
237       self.dmac_fake.pio     = bus.port
238       self.uart1_fake.pio    = bus.port
239       self.uart2_fake.pio    = bus.port
240       self.uart3_fake.pio    = bus.port
241       self.smc_fake.pio      = bus.port
242       self.sp810_fake.pio    = bus.port
243       self.watchdog_fake.pio = bus.port
244       self.gpio0_fake.pio    = bus.port
245       self.gpio1_fake.pio    = bus.port
246       self.gpio2_fake.pio    = bus.port
247       self.ssp_fake.pio      = bus.port
248       self.sci_fake.pio      = bus.port
249       self.aaci_fake.pio     = bus.port
250       self.mmc_fake.pio      = bus.port
251       self.rtc_fake.pio      = bus.port
252
253