RealView.py revision 10353:dfebd39c48a7
1# Copyright (c) 2009-2014 ARM Limited 2# All rights reserved. 3# 4# The license below extends only to copyright in the software and shall 5# not be construed as granting a license to any other intellectual 6# property including but not limited to intellectual property relating 7# to a hardware implementation of the functionality of the software 8# licensed hereunder. You may use the software subject to the license 9# terms below provided that you ensure that this notice is replicated 10# unmodified and in its entirety in all distributions of the software, 11# modified or unmodified, in source code or in binary form. 12# 13# Copyright (c) 2006-2007 The Regents of The University of Michigan 14# All rights reserved. 15# 16# Redistribution and use in source and binary forms, with or without 17# modification, are permitted provided that the following conditions are 18# met: redistributions of source code must retain the above copyright 19# notice, this list of conditions and the following disclaimer; 20# redistributions in binary form must reproduce the above copyright 21# notice, this list of conditions and the following disclaimer in the 22# documentation and/or other materials provided with the distribution; 23# neither the name of the copyright holders nor the names of its 24# contributors may be used to endorse or promote products derived from 25# this software without specific prior written permission. 26# 27# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 28# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 29# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 30# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 31# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 32# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 33# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 34# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 35# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 36# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 37# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 38# 39# Authors: Ali Saidi 40# Gabe Black 41# William Wang 42 43from m5.params import * 44from m5.proxy import * 45from Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice 46from Pci import PciConfigAll 47from Ethernet import NSGigE, IGbE_igb, IGbE_e1000 48from Ide import * 49from Platform import Platform 50from Terminal import Terminal 51from Uart import Uart 52from SimpleMemory import SimpleMemory 53from Gic import * 54 55class AmbaPioDevice(BasicPioDevice): 56 type = 'AmbaPioDevice' 57 abstract = True 58 cxx_header = "dev/arm/amba_device.hh" 59 amba_id = Param.UInt32("ID of AMBA device for kernel detection") 60 61class AmbaIntDevice(AmbaPioDevice): 62 type = 'AmbaIntDevice' 63 abstract = True 64 cxx_header = "dev/arm/amba_device.hh" 65 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") 66 int_num = Param.UInt32("Interrupt number that connects to GIC") 67 int_delay = Param.Latency("100ns", 68 "Time between action and interrupt generation by device") 69 70class AmbaDmaDevice(DmaDevice): 71 type = 'AmbaDmaDevice' 72 abstract = True 73 cxx_header = "dev/arm/amba_device.hh" 74 pio_addr = Param.Addr("Address for AMBA slave interface") 75 pio_latency = Param.Latency("10ns", "Time between action and write/read result by AMBA DMA Device") 76 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") 77 int_num = Param.UInt32("Interrupt number that connects to GIC") 78 amba_id = Param.UInt32("ID of AMBA device for kernel detection") 79 80class A9SCU(BasicPioDevice): 81 type = 'A9SCU' 82 cxx_header = "dev/arm/a9scu.hh" 83 84class RealViewCtrl(BasicPioDevice): 85 type = 'RealViewCtrl' 86 cxx_header = "dev/arm/rv_ctrl.hh" 87 proc_id0 = Param.UInt32(0x0C000000, "Processor ID, SYS_PROCID") 88 proc_id1 = Param.UInt32(0x0C000222, "Processor ID, SYS_PROCID1") 89 idreg = Param.UInt32(0x00000000, "ID Register, SYS_ID") 90 91class VGic(PioDevice): 92 type = 'VGic' 93 cxx_header = "dev/arm/vgic.hh" 94 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") 95 platform = Param.Platform(Parent.any, "Platform this device is part of.") 96 vcpu_addr = Param.Addr(0, "Address for vcpu interfaces") 97 hv_addr = Param.Addr(0, "Address for hv control") 98 pio_delay = Param.Latency('10ns', "Delay for PIO r/w") 99 # The number of list registers is not currently configurable at runtime. 100 ppint = Param.UInt32("HV maintenance interrupt number") 101 102class AmbaFake(AmbaPioDevice): 103 type = 'AmbaFake' 104 cxx_header = "dev/arm/amba_fake.hh" 105 ignore_access = Param.Bool(False, "Ignore reads/writes to this device, (e.g. IsaFake + AMBA)") 106 amba_id = 0; 107 108class Pl011(Uart): 109 type = 'Pl011' 110 cxx_header = "dev/arm/pl011.hh" 111 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") 112 int_num = Param.UInt32("Interrupt number that connects to GIC") 113 end_on_eot = Param.Bool(False, "End the simulation when a EOT is received on the UART") 114 int_delay = Param.Latency("100ns", "Time between action and interrupt generation by UART") 115 116class Sp804(AmbaPioDevice): 117 type = 'Sp804' 118 cxx_header = "dev/arm/timer_sp804.hh" 119 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") 120 int_num0 = Param.UInt32("Interrupt number that connects to GIC") 121 clock0 = Param.Clock('1MHz', "Clock speed of the input") 122 int_num1 = Param.UInt32("Interrupt number that connects to GIC") 123 clock1 = Param.Clock('1MHz', "Clock speed of the input") 124 amba_id = 0x00141804 125 126class CpuLocalTimer(BasicPioDevice): 127 type = 'CpuLocalTimer' 128 cxx_header = "dev/arm/timer_cpulocal.hh" 129 gic = Param.BaseGic(Parent.any, "Gic to use for interrupting") 130 int_num_timer = Param.UInt32("Interrrupt number used per-cpu to GIC") 131 int_num_watchdog = Param.UInt32("Interrupt number for per-cpu watchdog to GIC") 132 133class GenericTimer(SimObject): 134 type = 'GenericTimer' 135 cxx_header = "dev/arm/generic_timer.hh" 136 system = Param.System(Parent.any, "system") 137 gic = Param.BaseGic(Parent.any, "GIC to use for interrupting") 138 int_num = Param.UInt32("Interrupt number used per-cpu to GIC") 139 # @todo: for now only one timer per CPU is supported, which is the 140 # normal behaviour when Security and Virt. extensions are disabled. 141 142class PL031(AmbaIntDevice): 143 type = 'PL031' 144 cxx_header = "dev/arm/rtc_pl031.hh" 145 time = Param.Time('01/01/2009', "System time to use ('Now' for actual time)") 146 amba_id = 0x00341031 147 148class Pl050(AmbaIntDevice): 149 type = 'Pl050' 150 cxx_header = "dev/arm/kmi.hh" 151 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer display") 152 is_mouse = Param.Bool(False, "Is this interface a mouse, if not a keyboard") 153 int_delay = '1us' 154 amba_id = 0x00141050 155 156class Pl111(AmbaDmaDevice): 157 type = 'Pl111' 158 cxx_header = "dev/arm/pl111.hh" 159 pixel_clock = Param.Clock('24MHz', "Pixel clock") 160 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer display") 161 amba_id = 0x00141111 162 enable_capture = Param.Bool(True, "capture frame to system.framebuffer.bmp") 163 164 165class HDLcd(AmbaDmaDevice): 166 type = 'HDLcd' 167 cxx_header = "dev/arm/hdlcd.hh" 168 # For reference, 1024x768MR-16@60 ~= 56 MHz 169 # 1920x1080MR-16@60 ~= 137 MHz 170 # 3840x2160MR-16@60 ~= 533 MHz 171 # Match against the resolution selected in the Linux DTS/DTB file. 172 pixel_clock = Param.Clock('137MHz', "Clock frequency of the pixel clock " 173 "(i.e. PXLREFCLK / OSCCLK 5") 174 vnc = Param.VncInput(Parent.any, "Vnc server for remote frame buffer " 175 "display") 176 amba_id = 0x00141000 177 enable_capture = Param.Bool(True, "capture frame to system.framebuffer.bmp") 178 179class RealView(Platform): 180 type = 'RealView' 181 cxx_header = "dev/arm/realview.hh" 182 system = Param.System(Parent.any, "system") 183 pci_cfg_base = Param.Addr(0, "Base address of PCI Configuraiton Space") 184 mem_start_addr = Param.Addr(0, "Start address of main memory") 185 max_mem_size = Param.Addr('256MB', "Maximum amount of RAM supported by platform") 186 187 def attachPciDevices(self): 188 pass 189 190 def enableMSIX(self): 191 pass 192 193 def onChipIOClkDomain(self, clkdomain): 194 pass 195 196 def offChipIOClkDomain(self, clkdomain): 197 pass 198 199 def setupBootLoader(self, mem_bus, cur_sys, loc): 200 self.nvmem = SimpleMemory(range = AddrRange('2GB', size = '64MB'), 201 conf_table_reported = False) 202 self.nvmem.port = mem_bus.master 203 cur_sys.boot_loader = loc('boot.arm') 204 cur_sys.atags_addr = 0x100 205 cur_sys.load_addr_mask = 0xfffffff 206 cur_sys.load_offset = 0 207 208 209# Reference for memory map and interrupt number 210# RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A) 211# Chapter 4: Programmer's Reference 212class RealViewPBX(RealView): 213 uart = Pl011(pio_addr=0x10009000, int_num=44) 214 realview_io = RealViewCtrl(pio_addr=0x10000000) 215 gic = Pl390() 216 timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000) 217 timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000) 218 local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0x1f000600) 219 clcd = Pl111(pio_addr=0x10020000, int_num=55) 220 kmi0 = Pl050(pio_addr=0x10006000, int_num=52) 221 kmi1 = Pl050(pio_addr=0x10007000, int_num=53, is_mouse=True) 222 a9scu = A9SCU(pio_addr=0x1f000000) 223 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=7, pci_bus=2, 224 io_shift = 1, ctrl_offset = 2, Command = 0x1, 225 BAR0 = 0x18000000, BAR0Size = '16B', 226 BAR1 = 0x18000100, BAR1Size = '1B', 227 BAR0LegacyIO = True, BAR1LegacyIO = True) 228 229 230 l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff) 231 flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000, 232 fake_mem=True) 233 dmac_fake = AmbaFake(pio_addr=0x10030000) 234 uart1_fake = AmbaFake(pio_addr=0x1000a000) 235 uart2_fake = AmbaFake(pio_addr=0x1000b000) 236 uart3_fake = AmbaFake(pio_addr=0x1000c000) 237 smc_fake = AmbaFake(pio_addr=0x100e1000) 238 sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True) 239 watchdog_fake = AmbaFake(pio_addr=0x10010000) 240 gpio0_fake = AmbaFake(pio_addr=0x10013000) 241 gpio1_fake = AmbaFake(pio_addr=0x10014000) 242 gpio2_fake = AmbaFake(pio_addr=0x10015000) 243 ssp_fake = AmbaFake(pio_addr=0x1000d000) 244 sci_fake = AmbaFake(pio_addr=0x1000e000) 245 aaci_fake = AmbaFake(pio_addr=0x10004000) 246 mmc_fake = AmbaFake(pio_addr=0x10005000) 247 rtc = PL031(pio_addr=0x10017000, int_num=42) 248 249 250 # Attach I/O devices that are on chip and also set the appropriate 251 # ranges for the bridge 252 def attachOnChipIO(self, bus, bridge): 253 self.gic.pio = bus.master 254 self.l2x0_fake.pio = bus.master 255 self.a9scu.pio = bus.master 256 self.local_cpu_timer.pio = bus.master 257 # Bridge ranges based on excluding what is part of on-chip I/O 258 # (gic, l2x0, a9scu, local_cpu_timer) 259 bridge.ranges = [AddrRange(self.realview_io.pio_addr, 260 self.a9scu.pio_addr - 1), 261 AddrRange(self.flash_fake.pio_addr, 262 self.flash_fake.pio_addr + \ 263 self.flash_fake.pio_size - 1)] 264 265 # Set the clock domain for IO objects that are considered 266 # to be "close" to the cores. 267 def onChipIOClkDomain(self, clkdomain): 268 self.gic.clk_domain = clkdomain 269 self.l2x0_fake.clk_domain = clkdomain 270 self.a9scu.clkdomain = clkdomain 271 self.local_cpu_timer.clk_domain = clkdomain 272 273 # Attach I/O devices to specified bus object. Can't do this 274 # earlier, since the bus object itself is typically defined at the 275 # System level. 276 def attachIO(self, bus): 277 self.uart.pio = bus.master 278 self.realview_io.pio = bus.master 279 self.timer0.pio = bus.master 280 self.timer1.pio = bus.master 281 self.clcd.pio = bus.master 282 self.clcd.dma = bus.slave 283 self.kmi0.pio = bus.master 284 self.kmi1.pio = bus.master 285 self.cf_ctrl.pio = bus.master 286 self.cf_ctrl.config = bus.master 287 self.cf_ctrl.dma = bus.slave 288 self.dmac_fake.pio = bus.master 289 self.uart1_fake.pio = bus.master 290 self.uart2_fake.pio = bus.master 291 self.uart3_fake.pio = bus.master 292 self.smc_fake.pio = bus.master 293 self.sp810_fake.pio = bus.master 294 self.watchdog_fake.pio = bus.master 295 self.gpio0_fake.pio = bus.master 296 self.gpio1_fake.pio = bus.master 297 self.gpio2_fake.pio = bus.master 298 self.ssp_fake.pio = bus.master 299 self.sci_fake.pio = bus.master 300 self.aaci_fake.pio = bus.master 301 self.mmc_fake.pio = bus.master 302 self.rtc.pio = bus.master 303 self.flash_fake.pio = bus.master 304 305 # Set the clock domain for IO objects that are considered 306 # to be "far" away from the cores. 307 def offChipIOClkDomain(self, clkdomain): 308 self.uart.clk_domain = clkdomain 309 self.realview_io.clk_domain = clkdomain 310 self.timer0.clk_domain = clkdomain 311 self.timer1.clk_domain = clkdomain 312 self.clcd.clk_domain = clkdomain 313 self.kmi0.clk_domain = clkdomain 314 self.kmi1.clk_domain = clkdomain 315 self.cf_ctrl.clk_domain = clkdomain 316 self.dmac_fake.clk_domain = clkdomain 317 self.uart1_fake.clk_domain = clkdomain 318 self.uart2_fake.clk_domain = clkdomain 319 self.uart3_fake.clk_domain = clkdomain 320 self.smc_fake.clk_domain = clkdomain 321 self.sp810_fake.clk_domain = clkdomain 322 self.watchdog_fake.clk_domain = clkdomain 323 self.gpio0_fake.clk_domain = clkdomain 324 self.gpio1_fake.clk_domain = clkdomain 325 self.gpio2_fake.clk_domain = clkdomain 326 self.ssp_fake.clk_domain = clkdomain 327 self.sci_fake.clk_domain = clkdomain 328 self.aaci_fake.clk_domain = clkdomain 329 self.mmc_fake.clk_domain = clkdomain 330 self.rtc.clk_domain = clkdomain 331 self.flash_fake.clk_domain = clkdomain 332 333# Reference for memory map and interrupt number 334# RealView Emulation Baseboard User Guide (ARM DUI 0143B) 335# Chapter 4: Programmer's Reference 336class RealViewEB(RealView): 337 uart = Pl011(pio_addr=0x10009000, int_num=44) 338 realview_io = RealViewCtrl(pio_addr=0x10000000, idreg=0x01400500) 339 gic = Pl390(dist_addr=0x10041000, cpu_addr=0x10040000) 340 timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0x10011000) 341 timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0x10012000) 342 clcd = Pl111(pio_addr=0x10020000, int_num=23) 343 kmi0 = Pl050(pio_addr=0x10006000, int_num=20) 344 kmi1 = Pl050(pio_addr=0x10007000, int_num=21, is_mouse=True) 345 346 l2x0_fake = IsaFake(pio_addr=0x1f002000, pio_size=0xfff, warn_access="1") 347 flash_fake = IsaFake(pio_addr=0x40000000, pio_size=0x20000000-1, 348 fake_mem=True) 349 dmac_fake = AmbaFake(pio_addr=0x10030000) 350 uart1_fake = AmbaFake(pio_addr=0x1000a000) 351 uart2_fake = AmbaFake(pio_addr=0x1000b000) 352 uart3_fake = AmbaFake(pio_addr=0x1000c000) 353 smcreg_fake = IsaFake(pio_addr=0x10080000, pio_size=0x10000-1) 354 smc_fake = AmbaFake(pio_addr=0x100e1000) 355 sp810_fake = AmbaFake(pio_addr=0x10001000, ignore_access=True) 356 watchdog_fake = AmbaFake(pio_addr=0x10010000) 357 gpio0_fake = AmbaFake(pio_addr=0x10013000) 358 gpio1_fake = AmbaFake(pio_addr=0x10014000) 359 gpio2_fake = AmbaFake(pio_addr=0x10015000) 360 ssp_fake = AmbaFake(pio_addr=0x1000d000) 361 sci_fake = AmbaFake(pio_addr=0x1000e000) 362 aaci_fake = AmbaFake(pio_addr=0x10004000) 363 mmc_fake = AmbaFake(pio_addr=0x10005000) 364 rtc_fake = AmbaFake(pio_addr=0x10017000, amba_id=0x41031) 365 366 367 368 # Attach I/O devices that are on chip and also set the appropriate 369 # ranges for the bridge 370 def attachOnChipIO(self, bus, bridge): 371 self.gic.pio = bus.master 372 self.l2x0_fake.pio = bus.master 373 # Bridge ranges based on excluding what is part of on-chip I/O 374 # (gic, l2x0) 375 bridge.ranges = [AddrRange(self.realview_io.pio_addr, 376 self.gic.cpu_addr - 1), 377 AddrRange(self.flash_fake.pio_addr, Addr.max)] 378 379 # Set the clock domain for IO objects that are considered 380 # to be "close" to the cores. 381 def onChipIOClkDomain(self, clkdomain): 382 self.gic.clk_domain = clkdomain 383 self.l2x0_fake.clk_domain = clkdomain 384 385 # Attach I/O devices to specified bus object. Can't do this 386 # earlier, since the bus object itself is typically defined at the 387 # System level. 388 def attachIO(self, bus): 389 self.uart.pio = bus.master 390 self.realview_io.pio = bus.master 391 self.timer0.pio = bus.master 392 self.timer1.pio = bus.master 393 self.clcd.pio = bus.master 394 self.clcd.dma = bus.slave 395 self.kmi0.pio = bus.master 396 self.kmi1.pio = bus.master 397 self.dmac_fake.pio = bus.master 398 self.uart1_fake.pio = bus.master 399 self.uart2_fake.pio = bus.master 400 self.uart3_fake.pio = bus.master 401 self.smc_fake.pio = bus.master 402 self.sp810_fake.pio = bus.master 403 self.watchdog_fake.pio = bus.master 404 self.gpio0_fake.pio = bus.master 405 self.gpio1_fake.pio = bus.master 406 self.gpio2_fake.pio = bus.master 407 self.ssp_fake.pio = bus.master 408 self.sci_fake.pio = bus.master 409 self.aaci_fake.pio = bus.master 410 self.mmc_fake.pio = bus.master 411 self.rtc_fake.pio = bus.master 412 self.flash_fake.pio = bus.master 413 self.smcreg_fake.pio = bus.master 414 415 # Set the clock domain for IO objects that are considered 416 # to be "far" away from the cores. 417 def offChipIOClkDomain(self, clkdomain): 418 self.uart.clk_domain = clkdomain 419 self.realview_io.clk_domain = clkdomain 420 self.timer0.clk_domain = clkdomain 421 self.timer1.clk_domain = clkdomain 422 self.clcd.clk_domain = clkdomain 423 self.kmi0.clk_domain = clkdomain 424 self.kmi1.clk_domain = clkdomain 425 self.dmac_fake.clk_domain = clkdomain 426 self.uart1_fake.clk_domain = clkdomain 427 self.uart2_fake.clk_domain = clkdomain 428 self.uart3_fake.clk_domain = clkdomain 429 self.smc_fake.clk_domain = clkdomain 430 self.sp810_fake.clk_domain = clkdomain 431 self.watchdog_fake.clk_domain = clkdomain 432 self.gpio0_fake.clk_domain = clkdomain 433 self.gpio1_fake.clk_domain = clkdomain 434 self.gpio2_fake.clk_domain = clkdomain 435 self.ssp_fake.clk_domain = clkdomain 436 self.sci_fake.clk_domain = clkdomain 437 self.aaci_fake.clk_domain = clkdomain 438 self.mmc_fake.clk_domain = clkdomain 439 self.rtc.clk_domain = clkdomain 440 self.flash_fake.clk_domain = clkdomain 441 self.smcreg_fake.clk_domain = clkdomain 442 443class VExpress_EMM(RealView): 444 mem_start_addr = '2GB' 445 max_mem_size = '2GB' 446 pci_cfg_base = 0x30000000 447 uart = Pl011(pio_addr=0x1c090000, int_num=37) 448 realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000, \ 449 idreg=0x02250000, pio_addr=0x1C010000) 450 gic = Pl390(dist_addr=0x2C001000, cpu_addr=0x2C002000) 451 local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0x2C080000) 452 generic_timer = GenericTimer(int_num=29) 453 timer0 = Sp804(int_num0=34, int_num1=34, pio_addr=0x1C110000, clock0='1MHz', clock1='1MHz') 454 timer1 = Sp804(int_num0=35, int_num1=35, pio_addr=0x1C120000, clock0='1MHz', clock1='1MHz') 455 clcd = Pl111(pio_addr=0x1c1f0000, int_num=46) 456 hdlcd = HDLcd(pio_addr=0x2b000000, int_num=117) 457 kmi0 = Pl050(pio_addr=0x1c060000, int_num=44) 458 kmi1 = Pl050(pio_addr=0x1c070000, int_num=45, is_mouse=True) 459 vgic = VGic(vcpu_addr=0x2c006000, hv_addr=0x2c004000, ppint=25) 460 cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2, 461 io_shift = 2, ctrl_offset = 2, Command = 0x1, 462 BAR0 = 0x1C1A0000, BAR0Size = '256B', 463 BAR1 = 0x1C1A0100, BAR1Size = '4096B', 464 BAR0LegacyIO = True, BAR1LegacyIO = True) 465 466 pciconfig = PciConfigAll(size='256MB') 467 vram = SimpleMemory(range = AddrRange(0x18000000, size='32MB'), 468 conf_table_reported = False) 469 rtc = PL031(pio_addr=0x1C170000, int_num=36) 470 471 l2x0_fake = IsaFake(pio_addr=0x2C100000, pio_size=0xfff) 472 uart1_fake = AmbaFake(pio_addr=0x1C0A0000) 473 uart2_fake = AmbaFake(pio_addr=0x1C0B0000) 474 uart3_fake = AmbaFake(pio_addr=0x1C0C0000) 475 sp810_fake = AmbaFake(pio_addr=0x1C020000, ignore_access=True) 476 watchdog_fake = AmbaFake(pio_addr=0x1C0F0000) 477 aaci_fake = AmbaFake(pio_addr=0x1C040000) 478 lan_fake = IsaFake(pio_addr=0x1A000000, pio_size=0xffff) 479 usb_fake = IsaFake(pio_addr=0x1B000000, pio_size=0x1ffff) 480 mmc_fake = AmbaFake(pio_addr=0x1c050000) 481 482 # Attach any PCI devices that are supported 483 def attachPciDevices(self): 484 self.ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0, 485 InterruptLine=1, InterruptPin=1) 486 self.ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0, 487 InterruptLine=2, InterruptPin=2) 488 489 def enableMSIX(self): 490 self.gic = Pl390(dist_addr=0x2C001000, cpu_addr=0x2C002000, it_lines=512) 491 self.gicv2m = Gicv2m() 492 self.gicv2m.frames = [Gicv2mFrame(spi_base=256, spi_len=64, addr=0x2C1C0000)] 493 494 def setupBootLoader(self, mem_bus, cur_sys, loc): 495 self.nvmem = SimpleMemory(range = AddrRange('64MB'), 496 conf_table_reported = False) 497 self.nvmem.port = mem_bus.master 498 cur_sys.boot_loader = loc('boot_emm.arm') 499 cur_sys.atags_addr = 0x8000000 500 cur_sys.load_addr_mask = 0xfffffff 501 cur_sys.load_offset = 0x80000000 502 503 # Attach I/O devices that are on chip and also set the appropriate 504 # ranges for the bridge 505 def attachOnChipIO(self, bus, bridge): 506 self.gic.pio = bus.master 507 self.local_cpu_timer.pio = bus.master 508 if hasattr(self, "gicv2m"): 509 self.gicv2m.pio = bus.master 510 self.hdlcd.dma = bus.slave 511 # Bridge ranges based on excluding what is part of on-chip I/O 512 # (gic, a9scu) 513 bridge.ranges = [AddrRange(0x2F000000, size='16MB'), 514 AddrRange(0x2B000000, size='4MB'), 515 AddrRange(0x30000000, size='256MB'), 516 AddrRange(0x40000000, size='512MB'), 517 AddrRange(0x18000000, size='64MB'), 518 AddrRange(0x1C000000, size='64MB')] 519 self.vgic.pio = bus.master 520 521 522 # Set the clock domain for IO objects that are considered 523 # to be "close" to the cores. 524 def onChipIOClkDomain(self, clkdomain): 525 self.gic.clk_domain = clkdomain 526 if hasattr(self, "gicv2m"): 527 self.gicv2m.clk_domain = clkdomain 528 self.hdlcd.clk_domain = clkdomain 529 self.vgic.clk_domain = clkdomain 530 531 # Attach I/O devices to specified bus object. Done here 532 # as the specified bus to connect to may not always be fixed. 533 def attachIO(self, bus): 534 self.uart.pio = bus.master 535 self.realview_io.pio = bus.master 536 self.timer0.pio = bus.master 537 self.timer1.pio = bus.master 538 self.clcd.pio = bus.master 539 self.clcd.dma = bus.slave 540 self.hdlcd.pio = bus.master 541 self.kmi0.pio = bus.master 542 self.kmi1.pio = bus.master 543 self.cf_ctrl.pio = bus.master 544 self.cf_ctrl.dma = bus.slave 545 self.cf_ctrl.config = bus.master 546 self.rtc.pio = bus.master 547 bus.use_default_range = True 548 self.vram.port = bus.master 549 self.pciconfig.pio = bus.default 550 551 self.l2x0_fake.pio = bus.master 552 self.uart1_fake.pio = bus.master 553 self.uart2_fake.pio = bus.master 554 self.uart3_fake.pio = bus.master 555 self.sp810_fake.pio = bus.master 556 self.watchdog_fake.pio = bus.master 557 self.aaci_fake.pio = bus.master 558 self.lan_fake.pio = bus.master 559 self.usb_fake.pio = bus.master 560 self.mmc_fake.pio = bus.master 561 562 # Try to attach the I/O if it exists 563 try: 564 self.ide.pio = bus.master 565 self.ide.config = bus.master 566 self.ide.dma = bus.slave 567 self.ethernet.pio = bus.master 568 self.ethernet.config = bus.master 569 self.ethernet.dma = bus.slave 570 except: 571 pass 572 573 # Set the clock domain for IO objects that are considered 574 # to be "far" away from the cores. 575 def offChipIOClkDomain(self, clkdomain): 576 self.uart.clk_domain = clkdomain 577 self.realview_io.clk_domain = clkdomain 578 self.timer0.clk_domain = clkdomain 579 self.timer1.clk_domain = clkdomain 580 self.clcd.clk_domain = clkdomain 581 self.kmi0.clk_domain = clkdomain 582 self.kmi1.clk_domain = clkdomain 583 self.cf_ctrl.clk_domain = clkdomain 584 self.rtc.clk_domain = clkdomain 585 self.vram.clk_domain = clkdomain 586 self.pciconfig.clk_domain = clkdomain 587 588 self.l2x0_fake.clk_domain = clkdomain 589 self.uart1_fake.clk_domain = clkdomain 590 self.uart2_fake.clk_domain = clkdomain 591 self.uart3_fake.clk_domain = clkdomain 592 self.sp810_fake.clk_domain = clkdomain 593 self.watchdog_fake.clk_domain = clkdomain 594 self.aaci_fake.clk_domain = clkdomain 595 self.lan_fake.clk_domain = clkdomain 596 self.usb_fake.clk_domain = clkdomain 597 self.mmc_fake.clk_domain = clkdomain 598 599class VExpress_EMM64(VExpress_EMM): 600 def setupBootLoader(self, mem_bus, cur_sys, loc): 601 self.nvmem = SimpleMemory(range = AddrRange(0, size = '64MB')) 602 self.nvmem.port = mem_bus.master 603 cur_sys.boot_loader = loc('boot_emm.arm64') 604 cur_sys.atags_addr = 0x8000000 605 cur_sys.load_addr_mask = 0xfffffff 606 cur_sys.load_offset = 0x80000000 607 608 609