xref: /gem5/src/cpu/BaseCPU.py

# Copyright (c) 2005-2008 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Nathan Binkert

import sys

from m5.defines import buildEnv
from m5.params import *
from m5.proxy import *

from Bus import Bus
from InstTracer import InstTracer
from ExeTracer import ExeTracer
from MemObject import MemObject

default_tracer = ExeTracer()

if buildEnv['TARGET_ISA'] == 'alpha':
    from AlphaTLB import AlphaDTB, AlphaITB
    if buildEnv['FULL_SYSTEM']:
        from AlphaInterrupts import AlphaInterrupts
elif buildEnv['TARGET_ISA'] == 'sparc':
    from SparcTLB import SparcTLB
    if buildEnv['FULL_SYSTEM']:
        from SparcInterrupts import SparcInterrupts
elif buildEnv['TARGET_ISA'] == 'x86':
    from X86TLB import X86TLB
    if buildEnv['FULL_SYSTEM']:
        from X86LocalApic import X86LocalApic
elif buildEnv['TARGET_ISA'] == 'mips':
    from MipsTLB import MipsTLB
    if buildEnv['FULL_SYSTEM']:
        from MipsInterrupts import MipsInterrupts
elif buildEnv['TARGET_ISA'] == 'arm':
    from ArmTLB import ArmTLB
    if buildEnv['FULL_SYSTEM']:
        from ArmInterrupts import ArmInterrupts
elif buildEnv['TARGET_ISA'] == 'power':
    from PowerTLB import PowerTLB
    if buildEnv['FULL_SYSTEM']:
        from PowerInterrupts import PowerInterrupts

class BaseCPU(MemObject):
    type = 'BaseCPU'
    abstract = True

    system = Param.System(Parent.any, "system object")
    cpu_id = Param.Int(-1, "CPU identifier")
    numThreads = Param.Unsigned(1, "number of HW thread contexts")

    function_trace = Param.Bool(False, "Enable function trace")
    function_trace_start = Param.Tick(0, "Cycle to start function trace")

    checker = Param.BaseCPU(NULL, "checker CPU")

    do_checkpoint_insts = Param.Bool(True,
        "enable checkpoint pseudo instructions")
    do_statistics_insts = Param.Bool(True,
        "enable statistics pseudo instructions")

    if buildEnv['FULL_SYSTEM']:
        profile = Param.Latency('0ns', "trace the kernel stack")
        do_quiesce = Param.Bool(True, "enable quiesce instructions")
    else:
        workload = VectorParam.Process("processes to run")

    if buildEnv['TARGET_ISA'] == 'sparc':
        dtb = Param.SparcTLB(SparcTLB(), "Data TLB")
        itb = Param.SparcTLB(SparcTLB(), "Instruction TLB")
        if buildEnv['FULL_SYSTEM']:
            interrupts = Param.SparcInterrupts(
                SparcInterrupts(), "Interrupt Controller")
    elif buildEnv['TARGET_ISA'] == 'alpha':
        dtb = Param.AlphaTLB(AlphaDTB(), "Data TLB")
        itb = Param.AlphaTLB(AlphaITB(), "Instruction TLB")
        if buildEnv['FULL_SYSTEM']:
            interrupts = Param.AlphaInterrupts(
                AlphaInterrupts(), "Interrupt Controller")
    elif buildEnv['TARGET_ISA'] == 'x86':
        dtb = Param.X86TLB(X86TLB(), "Data TLB")
        itb = Param.X86TLB(X86TLB(), "Instruction TLB")
        if buildEnv['FULL_SYSTEM']:
            _localApic = X86LocalApic(pio_addr=0x2000000000000000)
            interrupts = \
                Param.X86LocalApic(_localApic, "Interrupt Controller")
    elif buildEnv['TARGET_ISA'] == 'mips':
        dtb = Param.MipsTLB(MipsTLB(), "Data TLB")
        itb = Param.MipsTLB(MipsTLB(), "Instruction TLB")
        if buildEnv['FULL_SYSTEM']:
            interrupts = Param.MipsInterrupts(
                    MipsInterrupts(), "Interrupt Controller")
    elif buildEnv['TARGET_ISA'] == 'arm':
        dtb = Param.ArmTLB(ArmTLB(), "Data TLB")
        itb = Param.ArmTLB(ArmTLB(), "Instruction TLB")
        if buildEnv['FULL_SYSTEM']:
            interrupts = Param.ArmInterrupts(
                    ArmInterrupts(), "Interrupt Controller")
    elif buildEnv['TARGET_ISA'] == 'power':
        UnifiedTLB = Param.Bool(True, "Is this a Unified TLB?")
        dtb = Param.PowerTLB(PowerTLB(), "Data TLB")
        itb = Param.PowerTLB(PowerTLB(), "Instruction TLB")
        if buildEnv['FULL_SYSTEM']:
            interrupts = Param.PowerInterrupts(
                    PowerInterrupts(), "Interrupt Controller")
    else:
        print "Don't know what TLB to use for ISA %s" % \
            buildEnv['TARGET_ISA']
        sys.exit(1)

    max_insts_all_threads = Param.Counter(0,
        "terminate when all threads have reached this inst count")
    max_insts_any_thread = Param.Counter(0,
        "terminate when any thread reaches this inst count")
    max_loads_all_threads = Param.Counter(0,
        "terminate when all threads have reached this load count")
    max_loads_any_thread = Param.Counter(0,
        "terminate when any thread reaches this load count")
    progress_interval = Param.Tick(0,
        "interval to print out the progress message")

    defer_registration = Param.Bool(False,
        "defer registration with system (for sampling)")

    clock = Param.Clock('1t', "clock speed")
    phase = Param.Latency('0ns', "clock phase")

    tracer = Param.InstTracer(default_tracer, "Instruction tracer")

    _cached_ports = []
    if buildEnv['TARGET_ISA'] in ['x86', 'arm'] and buildEnv['FULL_SYSTEM']:
        _cached_ports = ["itb.walker.port", "dtb.walker.port"]

    _uncached_ports = []
    if buildEnv['TARGET_ISA'] == 'x86' and buildEnv['FULL_SYSTEM']:
        _uncached_ports = ["interrupts.pio", "interrupts.int_port"]

    def connectCachedPorts(self, bus):
        for p in self._cached_ports:
            exec('self.%s = bus.port' % p)

    def connectUncachedPorts(self, bus):
        for p in self._uncached_ports:
            exec('self.%s = bus.port' % p)

    def connectAllPorts(self, cached_bus, uncached_bus = None):
        self.connectCachedPorts(cached_bus)
        if not uncached_bus:
            uncached_bus = cached_bus
        self.connectUncachedPorts(uncached_bus)

    def addPrivateSplitL1Caches(self, ic, dc, iwc = None, dwc = None):
        assert(len(self._cached_ports) < 7)
        self.icache = ic
        self.dcache = dc
        self.icache_port = ic.cpu_side
        self.dcache_port = dc.cpu_side
        self._cached_ports = ['icache.mem_side', 'dcache.mem_side']
        if buildEnv['FULL_SYSTEM']:
            if buildEnv['TARGET_ISA'] == 'x86':
                self.itb_walker_cache = iwc
                self.dtb_walker_cache = dwc
                self.itb.walker.port = iwc.cpu_side
                self.dtb.walker.port = dwc.cpu_side
                self._cached_ports += ["itb_walker_cache.mem_side", \
                                       "dtb_walker_cache.mem_side"]
            elif buildEnv['TARGET_ISA'] == 'arm':
                self._cached_ports += ["itb.walker.port", "dtb.walker.port"]

    def addTwoLevelCacheHierarchy(self, ic, dc, l2c, iwc = None, dwc = None):
        self.addPrivateSplitL1Caches(ic, dc, iwc, dwc)
        self.toL2Bus = Bus()
        self.connectCachedPorts(self.toL2Bus)
        self.l2cache = l2c
        self.l2cache.cpu_side = self.toL2Bus.port
        self._cached_ports = ['l2cache.mem_side']

    if buildEnv['TARGET_ISA'] == 'mips':
        CP0_IntCtl_IPTI = Param.Unsigned(0,"No Description")
        CP0_IntCtl_IPPCI = Param.Unsigned(0,"No Description")
        CP0_SrsCtl_HSS = Param.Unsigned(0,"No Description")
        CP0_EBase_CPUNum = Param.Unsigned(0,"No Description")
        CP0_PRId_CompanyOptions = Param.Unsigned(0,"Company Options in Processor ID Register")
        CP0_PRId_CompanyID = Param.Unsigned(0,"Company Identifier in Processor ID Register")
        CP0_PRId_ProcessorID = Param.Unsigned(1,"Processor ID (0=>Not MIPS32/64 Processor, 1=>MIPS, 2-255 => Other Company")
        CP0_PRId_Revision = Param.Unsigned(0,"Processor Revision Number in Processor ID Register")
        CP0_Config_BE = Param.Unsigned(0,"Big Endian?")
        CP0_Config_AT = Param.Unsigned(0,"No Description")
        CP0_Config_AR = Param.Unsigned(0,"No Description")
        CP0_Config_MT = Param.Unsigned(0,"No Description")
        CP0_Config_VI = Param.Unsigned(0,"No Description")
        CP0_Config1_M = Param.Unsigned(0,"Config2 Implemented?")
        CP0_Config1_MMU = Param.Unsigned(0,"MMU Type")
        CP0_Config1_IS = Param.Unsigned(0,"No Description")
        CP0_Config1_IL = Param.Unsigned(0,"No Description")
        CP0_Config1_IA = Param.Unsigned(0,"No Description")
        CP0_Config1_DS = Param.Unsigned(0,"No Description")
        CP0_Config1_DL = Param.Unsigned(0,"No Description")
        CP0_Config1_DA = Param.Unsigned(0,"No Description")
        CP0_Config1_C2 = Param.Bool(False,"No Description")
        CP0_Config1_MD = Param.Bool(False,"No Description")
        CP0_Config1_PC = Param.Bool(False,"No Description")
        CP0_Config1_WR = Param.Bool(False,"No Description")
        CP0_Config1_CA = Param.Bool(False,"No Description")
        CP0_Config1_EP = Param.Bool(False,"No Description")
        CP0_Config1_FP = Param.Bool(False,"FPU Implemented?")
        CP0_Config2_M = Param.Bool(False,"Config3 Implemented?")
        CP0_Config2_TU = Param.Unsigned(0,"No Description")
        CP0_Config2_TS = Param.Unsigned(0,"No Description")
        CP0_Config2_TL = Param.Unsigned(0,"No Description")
        CP0_Config2_TA = Param.Unsigned(0,"No Description")
        CP0_Config2_SU = Param.Unsigned(0,"No Description")
        CP0_Config2_SS = Param.Unsigned(0,"No Description")
        CP0_Config2_SL = Param.Unsigned(0,"No Description")
        CP0_Config2_SA = Param.Unsigned(0,"No Description")
        CP0_Config3_M = Param.Bool(False,"Config4 Implemented?")
        CP0_Config3_DSPP = Param.Bool(False,"DSP Extensions Present?")
        CP0_Config3_LPA = Param.Bool(False,"No Description")
        CP0_Config3_VEIC = Param.Bool(False,"No Description")
        CP0_Config3_VInt = Param.Bool(False,"No Description")
        CP0_Config3_SP = Param.Bool(False,"No Description")
        CP0_Config3_MT = Param.Bool(False,"Multithreading Extensions Present?")
        CP0_Config3_SM = Param.Bool(False,"No Description")
        CP0_Config3_TL = Param.Bool(False,"No Description")
        CP0_WatchHi_M = Param.Bool(False,"No Description")
        CP0_PerfCtr_M = Param.Bool(False,"No Description")
        CP0_PerfCtr_W = Param.Bool(False,"No Description")
        CP0_PRId = Param.Unsigned(0,"CP0 Status Register")
        CP0_Config = Param.Unsigned(0,"CP0 Config Register")
        CP0_Config1 = Param.Unsigned(0,"CP0 Config1 Register")
        CP0_Config2 = Param.Unsigned(0,"CP0 Config2 Register")
        CP0_Config3 = Param.Unsigned(0,"CP0 Config3 Register")