remote_gdb.cc revision 8799:dac1e33e07b0
1/* 2 * Copyright (c) 2002-2005 The Regents of The University of Michigan 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are 7 * met: redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer; 9 * redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution; 12 * neither the name of the copyright holders nor the names of its 13 * contributors may be used to endorse or promote products derived from 14 * this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * Authors: Nathan Binkert 29 */ 30 31/* 32 * Copyright (c) 1990, 1993 The Regents of the University of California 33 * All rights reserved 34 * 35 * This software was developed by the Computer Systems Engineering group 36 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and 37 * contributed to Berkeley. 38 * 39 * All advertising materials mentioning features or use of this software 40 * must display the following acknowledgement: 41 * This product includes software developed by the University of 42 * California, Lawrence Berkeley Laboratories. 43 * 44 * Redistribution and use in source and binary forms, with or without 45 * modification, are permitted provided that the following conditions 46 * are met: 47 * 1. Redistributions of source code must retain the above copyright 48 * notice, this list of conditions and the following disclaimer. 49 * 2. Redistributions in binary form must reproduce the above copyright 50 * notice, this list of conditions and the following disclaimer in the 51 * documentation and/or other materials provided with the distribution. 52 * 3. All advertising materials mentioning features or use of this software 53 * must display the following acknowledgement: 54 * This product includes software developed by the University of 55 * California, Berkeley and its contributors. 56 * 4. Neither the name of the University nor the names of its contributors 57 * may be used to endorse or promote products derived from this software 58 * without specific prior written permission. 59 * 60 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 61 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 62 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 63 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 64 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 65 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 66 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 67 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 68 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 69 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 70 * SUCH DAMAGE. 71 * 72 * @(#)kgdb_stub.c 8.4 (Berkeley) 1/12/94 73 */ 74 75/*- 76 * Copyright (c) 2001 The NetBSD Foundation, Inc. 77 * All rights reserved. 78 * 79 * This code is derived from software contributed to The NetBSD Foundation 80 * by Jason R. Thorpe. 81 * 82 * Redistribution and use in source and binary forms, with or without 83 * modification, are permitted provided that the following conditions 84 * are met: 85 * 1. Redistributions of source code must retain the above copyright 86 * notice, this list of conditions and the following disclaimer. 87 * 2. Redistributions in binary form must reproduce the above copyright 88 * notice, this list of conditions and the following disclaimer in the 89 * documentation and/or other materials provided with the distribution. 90 * 3. All advertising materials mentioning features or use of this software 91 * must display the following acknowledgement: 92 * This product includes software developed by the NetBSD 93 * Foundation, Inc. and its contributors. 94 * 4. Neither the name of The NetBSD Foundation nor the names of its 95 * contributors may be used to endorse or promote products derived 96 * from this software without specific prior written permission. 97 * 98 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 99 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 100 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 101 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 102 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 103 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 104 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 105 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 106 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 107 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 108 * POSSIBILITY OF SUCH DAMAGE. 109 */ 110 111/* 112 * $NetBSD: kgdb_stub.c,v 1.8 2001/07/07 22:58:00 wdk Exp $ 113 * 114 * Taken from NetBSD 115 * 116 * "Stub" to allow remote cpu to debug over a serial line using gdb. 117 */ 118 119#include <sys/signal.h> 120#include <unistd.h> 121 122#include <cstdio> 123#include <string> 124 125#include "arch/vtophys.hh" 126#include "base/intmath.hh" 127#include "base/remote_gdb.hh" 128#include "base/socket.hh" 129#include "base/trace.hh" 130#include "config/the_isa.hh" 131#include "cpu/static_inst.hh" 132#include "cpu/thread_context.hh" 133#include "debug/GDBAll.hh" 134#include "mem/port.hh" 135#include "mem/fs_translating_port_proxy.hh" 136#include "mem/se_translating_port_proxy.hh" 137#include "sim/full_system.hh" 138#include "sim/system.hh" 139 140using namespace std; 141using namespace Debug; 142using namespace TheISA; 143 144#ifndef NDEBUG 145vector<BaseRemoteGDB *> debuggers; 146 147void 148debugger() 149{ 150 static int current_debugger = -1; 151 if (current_debugger >= 0 && current_debugger < (int)debuggers.size()) { 152 BaseRemoteGDB *gdb = debuggers[current_debugger]; 153 if (!gdb->isattached()) 154 gdb->listener->accept(); 155 if (gdb->isattached()) 156 gdb->trap(SIGILL); 157 } 158} 159#endif 160 161/////////////////////////////////////////////////////////// 162// 163// 164// 165 166GDBListener::Event::Event(GDBListener *l, int fd, int e) 167 : PollEvent(fd, e), listener(l) 168{} 169 170void 171GDBListener::Event::process(int revent) 172{ 173 listener->accept(); 174} 175 176GDBListener::GDBListener(BaseRemoteGDB *g, int p) 177 : event(NULL), gdb(g), port(p) 178{ 179 assert(!gdb->listener); 180 gdb->listener = this; 181} 182 183GDBListener::~GDBListener() 184{ 185 if (event) 186 delete event; 187} 188 189string 190GDBListener::name() 191{ 192 return gdb->name() + ".listener"; 193} 194 195void 196GDBListener::listen() 197{ 198 if (ListenSocket::allDisabled()) { 199 warn_once("Sockets disabled, not accepting gdb connections"); 200 return; 201 } 202 203 while (!listener.listen(port, true)) { 204 DPRINTF(GDBMisc, "Can't bind port %d\n", port); 205 port++; 206 } 207 208 event = new Event(this, listener.getfd(), POLLIN); 209 pollQueue.schedule(event); 210 211#ifndef NDEBUG 212 gdb->number = debuggers.size(); 213 debuggers.push_back(gdb); 214#endif 215 216#ifndef NDEBUG 217 ccprintf(cerr, "%d: %s: listening for remote gdb #%d on port %d\n", 218 curTick(), name(), gdb->number, port); 219#else 220 ccprintf(cerr, "%d: %s: listening for remote gdb on port %d\n", 221 curTick(), name(), port); 222#endif 223} 224 225void 226GDBListener::accept() 227{ 228 if (!listener.islistening()) 229 panic("GDBListener::accept(): cannot accept if we're not listening!"); 230 231 int sfd = listener.accept(true); 232 233 if (sfd != -1) { 234 if (gdb->isattached()) 235 close(sfd); 236 else 237 gdb->attach(sfd); 238 } 239} 240 241BaseRemoteGDB::Event::Event(BaseRemoteGDB *g, int fd, int e) 242 : PollEvent(fd, e), gdb(g) 243{} 244 245void 246BaseRemoteGDB::Event::process(int revent) 247{ 248 if (revent & POLLIN) 249 gdb->trap(SIGILL); 250 else if (revent & POLLNVAL) 251 gdb->detach(); 252} 253 254BaseRemoteGDB::BaseRemoteGDB(System *_system, ThreadContext *c, size_t cacheSize) 255 : event(NULL), listener(NULL), number(-1), fd(-1), 256 active(false), attached(false), 257 system(_system), pmem(_system->physmem), context(c), 258 gdbregs(cacheSize) 259{ 260 memset(gdbregs.regs, 0, gdbregs.bytes()); 261} 262 263BaseRemoteGDB::~BaseRemoteGDB() 264{ 265 if (event) 266 delete event; 267} 268 269string 270BaseRemoteGDB::name() 271{ 272 return system->name() + ".remote_gdb"; 273} 274 275bool 276BaseRemoteGDB::isattached() 277{ return attached; } 278 279void 280BaseRemoteGDB::attach(int f) 281{ 282 fd = f; 283 284 event = new Event(this, fd, POLLIN); 285 pollQueue.schedule(event); 286 287 attached = true; 288 DPRINTFN("remote gdb attached\n"); 289} 290 291void 292BaseRemoteGDB::detach() 293{ 294 attached = false; 295 close(fd); 296 fd = -1; 297 298 pollQueue.remove(event); 299 DPRINTFN("remote gdb detached\n"); 300} 301 302const char * 303BaseRemoteGDB::gdb_command(char cmd) 304{ 305 switch (cmd) { 306 case GDBSignal: return "KGDB_SIGNAL"; 307 case GDBSetBaud: return "KGDB_SET_BAUD"; 308 case GDBSetBreak: return "KGDB_SET_BREAK"; 309 case GDBCont: return "KGDB_CONT"; 310 case GDBAsyncCont: return "KGDB_ASYNC_CONT"; 311 case GDBDebug: return "KGDB_DEBUG"; 312 case GDBDetach: return "KGDB_DETACH"; 313 case GDBRegR: return "KGDB_REG_R"; 314 case GDBRegW: return "KGDB_REG_W"; 315 case GDBSetThread: return "KGDB_SET_THREAD"; 316 case GDBCycleStep: return "KGDB_CYCLE_STEP"; 317 case GDBSigCycleStep: return "KGDB_SIG_CYCLE_STEP"; 318 case GDBKill: return "KGDB_KILL"; 319 case GDBMemW: return "KGDB_MEM_W"; 320 case GDBMemR: return "KGDB_MEM_R"; 321 case GDBSetReg: return "KGDB_SET_REG"; 322 case GDBReadReg: return "KGDB_READ_REG"; 323 case GDBQueryVar: return "KGDB_QUERY_VAR"; 324 case GDBSetVar: return "KGDB_SET_VAR"; 325 case GDBReset: return "KGDB_RESET"; 326 case GDBStep: return "KGDB_STEP"; 327 case GDBAsyncStep: return "KGDB_ASYNC_STEP"; 328 case GDBThreadAlive: return "KGDB_THREAD_ALIVE"; 329 case GDBTargetExit: return "KGDB_TARGET_EXIT"; 330 case GDBBinaryDload: return "KGDB_BINARY_DLOAD"; 331 case GDBClrHwBkpt: return "KGDB_CLR_HW_BKPT"; 332 case GDBSetHwBkpt: return "KGDB_SET_HW_BKPT"; 333 case GDBStart: return "KGDB_START"; 334 case GDBEnd: return "KGDB_END"; 335 case GDBGoodP: return "KGDB_GOODP"; 336 case GDBBadP: return "KGDB_BADP"; 337 default: return "KGDB_UNKNOWN"; 338 } 339} 340 341///////////////////////// 342// 343// 344 345uint8_t 346BaseRemoteGDB::getbyte() 347{ 348 uint8_t b; 349 if (::read(fd, &b, 1) != 1) 350 warn("could not read byte from debugger"); 351 return b; 352} 353 354void 355BaseRemoteGDB::putbyte(uint8_t b) 356{ 357 if (::write(fd, &b, 1) != 1) 358 warn("could not write byte to debugger"); 359} 360 361// Send a packet to gdb 362void 363BaseRemoteGDB::send(const char *bp) 364{ 365 const char *p; 366 uint8_t csum, c; 367 368 DPRINTF(GDBSend, "send: %s\n", bp); 369 370 do { 371 p = bp; 372 //Start sending a packet 373 putbyte(GDBStart); 374 //Send the contents, and also keep a check sum. 375 for (csum = 0; (c = *p); p++) { 376 putbyte(c); 377 csum += c; 378 } 379 //Send the ending character. 380 putbyte(GDBEnd); 381 //Sent the checksum. 382 putbyte(i2digit(csum >> 4)); 383 putbyte(i2digit(csum)); 384 //Try transmitting over and over again until the other end doesn't send an 385 //error back. 386 } while ((c = getbyte() & 0x7f) == GDBBadP); 387} 388 389// Receive a packet from gdb 390int 391BaseRemoteGDB::recv(char *bp, int maxlen) 392{ 393 char *p; 394 int c, csum; 395 int len; 396 397 do { 398 p = bp; 399 csum = len = 0; 400 //Find the beginning of a packet 401 while ((c = getbyte()) != GDBStart) 402 ; 403 404 //Read until you find the end of the data in the packet, and keep 405 //track of the check sum. 406 while ((c = getbyte()) != GDBEnd && len < maxlen) { 407 c &= 0x7f; 408 csum += c; 409 *p++ = c; 410 len++; 411 } 412 413 //Mask the check sum, and terminate the command string. 414 csum &= 0xff; 415 *p = '\0'; 416 417 //If the command was too long, report an error. 418 if (len >= maxlen) { 419 putbyte(GDBBadP); 420 continue; 421 } 422 423 //Bring in the checksum. If the check sum matches, csum will be 0. 424 csum -= digit2i(getbyte()) * 16; 425 csum -= digit2i(getbyte()); 426 427 //If the check sum was correct 428 if (csum == 0) { 429 //Report that the packet was received correctly 430 putbyte(GDBGoodP); 431 // Sequence present? 432 if (bp[2] == ':') { 433 putbyte(bp[0]); 434 putbyte(bp[1]); 435 len -= 3; 436 memcpy(bp, bp+3, len); 437 } 438 break; 439 } 440 //Otherwise, report that there was a mistake. 441 putbyte(GDBBadP); 442 } while (1); 443 444 DPRINTF(GDBRecv, "recv: %s: %s\n", gdb_command(*bp), bp); 445 446 return (len); 447} 448 449// Read bytes from kernel address space for debugger. 450bool 451BaseRemoteGDB::read(Addr vaddr, size_t size, char *data) 452{ 453 static Addr lastaddr = 0; 454 static size_t lastsize = 0; 455 456 if (vaddr < 10) { 457 DPRINTF(GDBRead, "read: reading memory location zero!\n"); 458 vaddr = lastaddr + lastsize; 459 } 460 461 DPRINTF(GDBRead, "read: addr=%#x, size=%d", vaddr, size); 462 463 if (FullSystem) { 464 FSTranslatingPortProxy *port = context->getVirtProxy(); 465 port->readBlob(vaddr, (uint8_t*)data, size); 466 } else { 467 SETranslatingPortProxy *port = context->getMemProxy(); 468 port->readBlob(vaddr, (uint8_t*)data, size); 469 } 470 471#if TRACING_ON 472 if (DTRACE(GDBRead)) { 473 if (DTRACE(GDBExtra)) { 474 char buf[1024]; 475 mem2hex(buf, data, size); 476 DPRINTFNR(": %s\n", buf); 477 } else 478 DPRINTFNR("\n"); 479 } 480#endif 481 482 return true; 483} 484 485// Write bytes to kernel address space for debugger. 486bool 487BaseRemoteGDB::write(Addr vaddr, size_t size, const char *data) 488{ 489 static Addr lastaddr = 0; 490 static size_t lastsize = 0; 491 492 if (vaddr < 10) { 493 DPRINTF(GDBWrite, "write: writing memory location zero!\n"); 494 vaddr = lastaddr + lastsize; 495 } 496 497 if (DTRACE(GDBWrite)) { 498 DPRINTFN("write: addr=%#x, size=%d", vaddr, size); 499 if (DTRACE(GDBExtra)) { 500 char buf[1024]; 501 mem2hex(buf, data, size); 502 DPRINTFNR(": %s\n", buf); 503 } else 504 DPRINTFNR("\n"); 505 } 506 if (FullSystem) { 507 FSTranslatingPortProxy *port = context->getVirtProxy(); 508 port->writeBlob(vaddr, (uint8_t*)data, size); 509 } else { 510 SETranslatingPortProxy *port = context->getMemProxy(); 511 port->writeBlob(vaddr, (uint8_t*)data, size); 512 delete port; 513 } 514 515 return true; 516} 517 518PCEventQueue *BaseRemoteGDB::getPcEventQueue() 519{ 520 return &system->pcEventQueue; 521} 522 523BaseRemoteGDB::HardBreakpoint::HardBreakpoint(BaseRemoteGDB *_gdb, Addr pc) 524 : PCEvent(_gdb->getPcEventQueue(), "HardBreakpoint Event", pc), 525 gdb(_gdb), refcount(0) 526{ 527 DPRINTF(GDBMisc, "creating hardware breakpoint at %#x\n", evpc); 528} 529 530void 531BaseRemoteGDB::HardBreakpoint::process(ThreadContext *tc) 532{ 533 DPRINTF(GDBMisc, "handling hardware breakpoint at %#x\n", pc()); 534 535 if (tc == gdb->context) 536 gdb->trap(SIGTRAP); 537} 538 539bool 540BaseRemoteGDB::insertSoftBreak(Addr addr, size_t len) 541{ 542 if (len != sizeof(TheISA::MachInst)) 543 panic("invalid length\n"); 544 545 return insertHardBreak(addr, len); 546} 547 548bool 549BaseRemoteGDB::removeSoftBreak(Addr addr, size_t len) 550{ 551 if (len != sizeof(MachInst)) 552 panic("invalid length\n"); 553 554 return removeHardBreak(addr, len); 555} 556 557bool 558BaseRemoteGDB::insertHardBreak(Addr addr, size_t len) 559{ 560 if (len != sizeof(MachInst)) 561 panic("invalid length\n"); 562 563 DPRINTF(GDBMisc, "inserting hardware breakpoint at %#x\n", addr); 564 565 HardBreakpoint *&bkpt = hardBreakMap[addr]; 566 if (bkpt == 0) 567 bkpt = new HardBreakpoint(this, addr); 568 569 bkpt->refcount++; 570 571 return true; 572} 573 574bool 575BaseRemoteGDB::removeHardBreak(Addr addr, size_t len) 576{ 577 if (len != sizeof(MachInst)) 578 panic("invalid length\n"); 579 580 DPRINTF(GDBMisc, "removing hardware breakpoint at %#x\n", addr); 581 582 break_iter_t i = hardBreakMap.find(addr); 583 if (i == hardBreakMap.end()) 584 return false; 585 586 HardBreakpoint *hbp = (*i).second; 587 if (--hbp->refcount == 0) { 588 delete hbp; 589 hardBreakMap.erase(i); 590 } 591 592 return true; 593} 594 595void 596BaseRemoteGDB::setTempBreakpoint(Addr bkpt) 597{ 598 DPRINTF(GDBMisc, "setTempBreakpoint: addr=%#x\n", bkpt); 599 insertHardBreak(bkpt, sizeof(TheISA::MachInst)); 600} 601 602void 603BaseRemoteGDB::clearTempBreakpoint(Addr &bkpt) 604{ 605 DPRINTF(GDBMisc, "setTempBreakpoint: addr=%#x\n", bkpt); 606 removeHardBreak(bkpt, sizeof(TheISA::MachInst)); 607 bkpt = 0; 608} 609 610const char * 611BaseRemoteGDB::break_type(char c) 612{ 613 switch(c) { 614 case '0': return "software breakpoint"; 615 case '1': return "hardware breakpoint"; 616 case '2': return "write watchpoint"; 617 case '3': return "read watchpoint"; 618 case '4': return "access watchpoint"; 619 default: return "unknown breakpoint/watchpoint"; 620 } 621} 622 623// This function does all command processing for interfacing to a 624// remote gdb. Note that the error codes are ignored by gdb at 625// present, but might eventually become meaningful. (XXX) It might 626// makes sense to use POSIX errno values, because that is what the 627// gdb/remote.c functions want to return. 628bool 629BaseRemoteGDB::trap(int type) 630{ 631 uint64_t val; 632 size_t datalen, len; 633 char data[GDBPacketBufLen + 1]; 634 char *buffer; 635 size_t bufferSize; 636 const char *p; 637 char command, subcmd; 638 string var; 639 bool ret; 640 641 if (!attached) 642 return false; 643 644 bufferSize = gdbregs.bytes() * 2 + 256; 645 buffer = (char*)malloc(bufferSize); 646 647 DPRINTF(GDBMisc, "trap: PC=%s\n", context->pcState()); 648 649 clearSingleStep(); 650 651 /* 652 * The first entry to this function is normally through 653 * a breakpoint trap in kgdb_connect(), in which case we 654 * must advance past the breakpoint because gdb will not. 655 * 656 * On the first entry here, we expect that gdb is not yet 657 * listening to us, so just enter the interaction loop. 658 * After the debugger is "active" (connected) it will be 659 * waiting for a "signaled" message from us. 660 */ 661 if (!active) 662 active = true; 663 else 664 // Tell remote host that an exception has occurred. 665 snprintf((char *)buffer, bufferSize, "S%02x", type); 666 send(buffer); 667 668 // Stick frame regs into our reg cache. 669 getregs(); 670 671 for (;;) { 672 datalen = recv(data, sizeof(data)); 673 data[sizeof(data) - 1] = 0; // Sentinel 674 command = data[0]; 675 subcmd = 0; 676 p = data + 1; 677 switch (command) { 678 679 case GDBSignal: 680 // if this command came from a running gdb, answer it -- 681 // the other guy has no way of knowing if we're in or out 682 // of this loop when he issues a "remote-signal". 683 snprintf((char *)buffer, bufferSize, 684 "S%02x", type); 685 send(buffer); 686 continue; 687 688 case GDBRegR: 689 if (2 * gdbregs.bytes() > bufferSize) 690 panic("buffer too small"); 691 692 mem2hex(buffer, gdbregs.regs, gdbregs.bytes()); 693 send(buffer); 694 continue; 695 696 case GDBRegW: 697 p = hex2mem(gdbregs.regs, p, gdbregs.bytes()); 698 if (p == NULL || *p != '\0') 699 send("E01"); 700 else { 701 setregs(); 702 send("OK"); 703 } 704 continue; 705 706#if 0 707 case GDBSetReg: 708 val = hex2i(&p); 709 if (*p++ != '=') { 710 send("E01"); 711 continue; 712 } 713 if (val < 0 && val >= KGDB_NUMREGS) { 714 send("E01"); 715 continue; 716 } 717 718 gdbregs.regs[val] = hex2i(&p); 719 setregs(); 720 send("OK"); 721 722 continue; 723#endif 724 725 case GDBMemR: 726 val = hex2i(&p); 727 if (*p++ != ',') { 728 send("E02"); 729 continue; 730 } 731 len = hex2i(&p); 732 if (*p != '\0') { 733 send("E03"); 734 continue; 735 } 736 if (len > bufferSize) { 737 send("E04"); 738 continue; 739 } 740 if (!acc(val, len)) { 741 send("E05"); 742 continue; 743 } 744 745 if (read(val, (size_t)len, (char *)buffer)) { 746 // variable length array would be nice, but C++ doesn't 747 // officially support those... 748 char *temp = new char[2*len+1]; 749 mem2hex(temp, buffer, len); 750 send(temp); 751 delete [] temp; 752 } else { 753 send("E05"); 754 } 755 continue; 756 757 case GDBMemW: 758 val = hex2i(&p); 759 if (*p++ != ',') { 760 send("E06"); 761 continue; 762 } 763 len = hex2i(&p); 764 if (*p++ != ':') { 765 send("E07"); 766 continue; 767 } 768 if (len > datalen - (p - data)) { 769 send("E08"); 770 continue; 771 } 772 p = hex2mem(buffer, p, bufferSize); 773 if (p == NULL) { 774 send("E09"); 775 continue; 776 } 777 if (!acc(val, len)) { 778 send("E0A"); 779 continue; 780 } 781 if (write(val, (size_t)len, (char *)buffer)) 782 send("OK"); 783 else 784 send("E0B"); 785 continue; 786 787 case GDBSetThread: 788 subcmd = *p++; 789 val = hex2i(&p); 790 if (val == 0) 791 send("OK"); 792 else 793 send("E01"); 794 continue; 795 796 case GDBDetach: 797 case GDBKill: 798 active = false; 799 clearSingleStep(); 800 detach(); 801 goto out; 802 803 case GDBAsyncCont: 804 subcmd = hex2i(&p); 805 if (*p++ == ';') { 806 val = hex2i(&p); 807 context->pcState(val); 808 } 809 clearSingleStep(); 810 goto out; 811 812 case GDBCont: 813 if (p - data < (ptrdiff_t)datalen) { 814 val = hex2i(&p); 815 context->pcState(val); 816 } 817 clearSingleStep(); 818 goto out; 819 820 case GDBAsyncStep: 821 subcmd = hex2i(&p); 822 if (*p++ == ';') { 823 val = hex2i(&p); 824 context->pcState(val); 825 } 826 setSingleStep(); 827 goto out; 828 829 case GDBStep: 830 if (p - data < (ptrdiff_t)datalen) { 831 val = hex2i(&p); 832 context->pcState(val); 833 } 834 setSingleStep(); 835 goto out; 836 837 case GDBClrHwBkpt: 838 subcmd = *p++; 839 if (*p++ != ',') send("E0D"); 840 val = hex2i(&p); 841 if (*p++ != ',') send("E0D"); 842 len = hex2i(&p); 843 844 DPRINTF(GDBMisc, "clear %s, addr=%#x, len=%d\n", 845 break_type(subcmd), val, len); 846 847 ret = false; 848 849 switch (subcmd) { 850 case '0': // software breakpoint 851 ret = removeSoftBreak(val, len); 852 break; 853 854 case '1': // hardware breakpoint 855 ret = removeHardBreak(val, len); 856 break; 857 858 case '2': // write watchpoint 859 case '3': // read watchpoint 860 case '4': // access watchpoint 861 default: // unknown 862 send(""); 863 break; 864 } 865 866 send(ret ? "OK" : "E0C"); 867 continue; 868 869 case GDBSetHwBkpt: 870 subcmd = *p++; 871 if (*p++ != ',') send("E0D"); 872 val = hex2i(&p); 873 if (*p++ != ',') send("E0D"); 874 len = hex2i(&p); 875 876 DPRINTF(GDBMisc, "set %s, addr=%#x, len=%d\n", 877 break_type(subcmd), val, len); 878 879 ret = false; 880 881 switch (subcmd) { 882 case '0': // software breakpoint 883 ret = insertSoftBreak(val, len); 884 break; 885 886 case '1': // hardware breakpoint 887 ret = insertHardBreak(val, len); 888 break; 889 890 case '2': // write watchpoint 891 case '3': // read watchpoint 892 case '4': // access watchpoint 893 default: // unknown 894 send(""); 895 break; 896 } 897 898 send(ret ? "OK" : "E0C"); 899 continue; 900 901 case GDBQueryVar: 902 var = string(p, datalen - 1); 903 if (var == "C") 904 send("QC0"); 905 else 906 send(""); 907 continue; 908 909 case GDBSetBaud: 910 case GDBSetBreak: 911 case GDBDebug: 912 case GDBCycleStep: 913 case GDBSigCycleStep: 914 case GDBReadReg: 915 case GDBSetVar: 916 case GDBReset: 917 case GDBThreadAlive: 918 case GDBTargetExit: 919 case GDBBinaryDload: 920 // Unsupported command 921 DPRINTF(GDBMisc, "Unsupported command: %s\n", 922 gdb_command(command)); 923 DDUMP(GDBMisc, (uint8_t *)data, datalen); 924 send(""); 925 continue; 926 927 default: 928 // Unknown command. 929 DPRINTF(GDBMisc, "Unknown command: %c(%#x)\n", 930 command, command); 931 send(""); 932 continue; 933 934 935 } 936 } 937 938 out: 939 free(buffer); 940 return true; 941} 942 943// Convert a hex digit into an integer. 944// This returns -1 if the argument passed is no valid hex digit. 945int 946BaseRemoteGDB::digit2i(char c) 947{ 948 if (c >= '0' && c <= '9') 949 return (c - '0'); 950 else if (c >= 'a' && c <= 'f') 951 return (c - 'a' + 10); 952 else if (c >= 'A' && c <= 'F') 953 954 return (c - 'A' + 10); 955 else 956 return (-1); 957} 958 959// Convert the low 4 bits of an integer into an hex digit. 960char 961BaseRemoteGDB::i2digit(int n) 962{ 963 return ("0123456789abcdef"[n & 0x0f]); 964} 965 966// Convert a byte array into an hex string. 967void 968BaseRemoteGDB::mem2hex(void *vdst, const void *vsrc, int len) 969{ 970 char *dst = (char *)vdst; 971 const char *src = (const char *)vsrc; 972 973 while (len--) { 974 *dst++ = i2digit(*src >> 4); 975 *dst++ = i2digit(*src++); 976 } 977 *dst = '\0'; 978} 979 980// Convert an hex string into a byte array. 981// This returns a pointer to the character following the last valid 982// hex digit. If the string ends in the middle of a byte, NULL is 983// returned. 984const char * 985BaseRemoteGDB::hex2mem(void *vdst, const char *src, int maxlen) 986{ 987 char *dst = (char *)vdst; 988 int msb, lsb; 989 990 while (*src && maxlen--) { 991 msb = digit2i(*src++); 992 if (msb < 0) 993 return (src - 1); 994 lsb = digit2i(*src++); 995 if (lsb < 0) 996 return (NULL); 997 *dst++ = (msb << 4) | lsb; 998 } 999 return (src); 1000} 1001 1002// Convert an hex string into an integer. 1003// This returns a pointer to the character following the last valid 1004// hex digit. 1005Addr 1006BaseRemoteGDB::hex2i(const char **srcp) 1007{ 1008 const char *src = *srcp; 1009 Addr r = 0; 1010 int nibble; 1011 1012 while ((nibble = digit2i(*src)) >= 0) { 1013 r *= 16; 1014 r += nibble; 1015 src++; 1016 } 1017 *srcp = src; 1018 return (r); 1019} 1020 1021