remote_gdb.cc revision 6227:a17798f2a52c
1/* 2 * Copyright (c) 2002-2005 The Regents of The University of Michigan 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are 7 * met: redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer; 9 * redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution; 12 * neither the name of the copyright holders nor the names of its 13 * contributors may be used to endorse or promote products derived from 14 * this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * Authors: Nathan Binkert 29 */ 30 31/* 32 * Copyright (c) 1990, 1993 33 * The Regents of the University of California. All rights reserved. 34 * 35 * This software was developed by the Computer Systems Engineering group 36 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and 37 * contributed to Berkeley. 38 * 39 * All advertising materials mentioning features or use of this software 40 * must display the following acknowledgement: 41 * This product includes software developed by the University of 42 * California, Lawrence Berkeley Laboratories. 43 * 44 * Redistribution and use in source and binary forms, with or without 45 * modification, are permitted provided that the following conditions 46 * are met: 47 * 1. Redistributions of source code must retain the above copyright 48 * notice, this list of conditions and the following disclaimer. 49 * 2. Redistributions in binary form must reproduce the above copyright 50 * notice, this list of conditions and the following disclaimer in the 51 * documentation and/or other materials provided with the distribution. 52 * 3. All advertising materials mentioning features or use of this software 53 * must display the following acknowledgement: 54 * This product includes software developed by the University of 55 * California, Berkeley and its contributors. 56 * 4. Neither the name of the University nor the names of its contributors 57 * may be used to endorse or promote products derived from this software 58 * without specific prior written permission. 59 * 60 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 61 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 62 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 63 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 64 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 65 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 66 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 67 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 68 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 69 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 70 * SUCH DAMAGE. 71 * 72 * @(#)kgdb_stub.c 8.4 (Berkeley) 1/12/94 73 */ 74 75/*- 76 * Copyright (c) 2001 The NetBSD Foundation, Inc. 77 * All rights reserved. 78 * 79 * This code is derived from software contributed to The NetBSD Foundation 80 * by Jason R. Thorpe. 81 * 82 * Redistribution and use in source and binary forms, with or without 83 * modification, are permitted provided that the following conditions 84 * are met: 85 * 1. Redistributions of source code must retain the above copyright 86 * notice, this list of conditions and the following disclaimer. 87 * 2. Redistributions in binary form must reproduce the above copyright 88 * notice, this list of conditions and the following disclaimer in the 89 * documentation and/or other materials provided with the distribution. 90 * 3. All advertising materials mentioning features or use of this software 91 * must display the following acknowledgement: 92 * This product includes software developed by the NetBSD 93 * Foundation, Inc. and its contributors. 94 * 4. Neither the name of The NetBSD Foundation nor the names of its 95 * contributors may be used to endorse or promote products derived 96 * from this software without specific prior written permission. 97 * 98 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 99 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 100 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 101 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 102 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 103 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 104 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 105 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 106 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 107 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 108 * POSSIBILITY OF SUCH DAMAGE. 109 */ 110 111/* 112 * $NetBSD: kgdb_stub.c,v 1.8 2001/07/07 22:58:00 wdk Exp $ 113 * 114 * Taken from NetBSD 115 * 116 * "Stub" to allow remote cpu to debug over a serial line using gdb. 117 */ 118 119#include <sys/signal.h> 120 121#include <string> 122#include <unistd.h> 123 124#include "config/full_system.hh" 125 126#if FULL_SYSTEM 127#include "arch/vtophys.hh" 128#endif 129 130#include "base/intmath.hh" 131#include "base/remote_gdb.hh" 132#include "base/socket.hh" 133#include "base/trace.hh" 134#include "cpu/thread_context.hh" 135#include "cpu/static_inst.hh" 136//#include "mem/physical.hh" 137#include "mem/port.hh" 138#include "mem/translating_port.hh" 139#include "sim/system.hh" 140 141using namespace std; 142using namespace TheISA; 143 144#ifndef NDEBUG 145vector<BaseRemoteGDB *> debuggers; 146 147void 148debugger() 149{ 150 static int current_debugger = -1; 151 if (current_debugger >= 0 && current_debugger < (int)debuggers.size()) { 152 BaseRemoteGDB *gdb = debuggers[current_debugger]; 153 if (!gdb->isattached()) 154 gdb->listener->accept(); 155 if (gdb->isattached()) 156 gdb->trap(SIGILL); 157 } 158} 159#endif 160 161/////////////////////////////////////////////////////////// 162// 163// 164// 165 166GDBListener::Event::Event(GDBListener *l, int fd, int e) 167 : PollEvent(fd, e), listener(l) 168{} 169 170void 171GDBListener::Event::process(int revent) 172{ 173 listener->accept(); 174} 175 176GDBListener::GDBListener(BaseRemoteGDB *g, int p) 177 : event(NULL), gdb(g), port(p) 178{ 179 assert(!gdb->listener); 180 gdb->listener = this; 181} 182 183GDBListener::~GDBListener() 184{ 185 if (event) 186 delete event; 187} 188 189string 190GDBListener::name() 191{ 192 return gdb->name() + ".listener"; 193} 194 195void 196GDBListener::listen() 197{ 198 if (ListenSocket::allDisabled()) { 199 warn_once("Sockets disabled, not accepting gdb connections"); 200 return; 201 } 202 203 while (!listener.listen(port, true)) { 204 DPRINTF(GDBMisc, "Can't bind port %d\n", port); 205 port++; 206 } 207 208 event = new Event(this, listener.getfd(), POLLIN); 209 pollQueue.schedule(event); 210 211#ifndef NDEBUG 212 gdb->number = debuggers.size(); 213 debuggers.push_back(gdb); 214#endif 215 216#ifndef NDEBUG 217 ccprintf(cerr, "%d: %s: listening for remote gdb #%d on port %d\n", 218 curTick, name(), gdb->number, port); 219#else 220 ccprintf(cerr, "%d: %s: listening for remote gdb on port %d\n", 221 curTick, name(), port); 222#endif 223} 224 225void 226GDBListener::accept() 227{ 228 if (!listener.islistening()) 229 panic("GDBListener::accept(): cannot accept if we're not listening!"); 230 231 int sfd = listener.accept(true); 232 233 if (sfd != -1) { 234 if (gdb->isattached()) 235 close(sfd); 236 else 237 gdb->attach(sfd); 238 } 239} 240 241BaseRemoteGDB::Event::Event(BaseRemoteGDB *g, int fd, int e) 242 : PollEvent(fd, e), gdb(g) 243{} 244 245void 246BaseRemoteGDB::Event::process(int revent) 247{ 248 if (revent & POLLIN) 249 gdb->trap(SIGILL); 250 else if (revent & POLLNVAL) 251 gdb->detach(); 252} 253 254BaseRemoteGDB::BaseRemoteGDB(System *_system, ThreadContext *c, size_t cacheSize) 255 : event(NULL), listener(NULL), number(-1), fd(-1), 256 active(false), attached(false), 257 system(_system), pmem(_system->physmem), context(c), 258 gdbregs(cacheSize) 259{ 260 memset(gdbregs.regs, 0, gdbregs.bytes()); 261} 262 263BaseRemoteGDB::~BaseRemoteGDB() 264{ 265 if (event) 266 delete event; 267} 268 269string 270BaseRemoteGDB::name() 271{ 272 return system->name() + ".remote_gdb"; 273} 274 275bool 276BaseRemoteGDB::isattached() 277{ return attached; } 278 279void 280BaseRemoteGDB::attach(int f) 281{ 282 fd = f; 283 284 event = new Event(this, fd, POLLIN); 285 pollQueue.schedule(event); 286 287 attached = true; 288 DPRINTFN("remote gdb attached\n"); 289} 290 291void 292BaseRemoteGDB::detach() 293{ 294 attached = false; 295 close(fd); 296 fd = -1; 297 298 pollQueue.remove(event); 299 DPRINTFN("remote gdb detached\n"); 300} 301 302const char * 303BaseRemoteGDB::gdb_command(char cmd) 304{ 305 switch (cmd) { 306 case GDBSignal: return "KGDB_SIGNAL"; 307 case GDBSetBaud: return "KGDB_SET_BAUD"; 308 case GDBSetBreak: return "KGDB_SET_BREAK"; 309 case GDBCont: return "KGDB_CONT"; 310 case GDBAsyncCont: return "KGDB_ASYNC_CONT"; 311 case GDBDebug: return "KGDB_DEBUG"; 312 case GDBDetach: return "KGDB_DETACH"; 313 case GDBRegR: return "KGDB_REG_R"; 314 case GDBRegW: return "KGDB_REG_W"; 315 case GDBSetThread: return "KGDB_SET_THREAD"; 316 case GDBCycleStep: return "KGDB_CYCLE_STEP"; 317 case GDBSigCycleStep: return "KGDB_SIG_CYCLE_STEP"; 318 case GDBKill: return "KGDB_KILL"; 319 case GDBMemW: return "KGDB_MEM_W"; 320 case GDBMemR: return "KGDB_MEM_R"; 321 case GDBSetReg: return "KGDB_SET_REG"; 322 case GDBReadReg: return "KGDB_READ_REG"; 323 case GDBQueryVar: return "KGDB_QUERY_VAR"; 324 case GDBSetVar: return "KGDB_SET_VAR"; 325 case GDBReset: return "KGDB_RESET"; 326 case GDBStep: return "KGDB_STEP"; 327 case GDBAsyncStep: return "KGDB_ASYNC_STEP"; 328 case GDBThreadAlive: return "KGDB_THREAD_ALIVE"; 329 case GDBTargetExit: return "KGDB_TARGET_EXIT"; 330 case GDBBinaryDload: return "KGDB_BINARY_DLOAD"; 331 case GDBClrHwBkpt: return "KGDB_CLR_HW_BKPT"; 332 case GDBSetHwBkpt: return "KGDB_SET_HW_BKPT"; 333 case GDBStart: return "KGDB_START"; 334 case GDBEnd: return "KGDB_END"; 335 case GDBGoodP: return "KGDB_GOODP"; 336 case GDBBadP: return "KGDB_BADP"; 337 default: return "KGDB_UNKNOWN"; 338 } 339} 340 341///////////////////////// 342// 343// 344 345uint8_t 346BaseRemoteGDB::getbyte() 347{ 348 uint8_t b; 349 if (::read(fd, &b, 1) != 1) 350 warn("could not read byte from debugger"); 351 return b; 352} 353 354void 355BaseRemoteGDB::putbyte(uint8_t b) 356{ 357 if (::write(fd, &b, 1) != 1) 358 warn("could not write byte to debugger"); 359} 360 361// Send a packet to gdb 362void 363BaseRemoteGDB::send(const char *bp) 364{ 365 const char *p; 366 uint8_t csum, c; 367 368 DPRINTF(GDBSend, "send: %s\n", bp); 369 370 do { 371 p = bp; 372 //Start sending a packet 373 putbyte(GDBStart); 374 //Send the contents, and also keep a check sum. 375 for (csum = 0; (c = *p); p++) { 376 putbyte(c); 377 csum += c; 378 } 379 //Send the ending character. 380 putbyte(GDBEnd); 381 //Sent the checksum. 382 putbyte(i2digit(csum >> 4)); 383 putbyte(i2digit(csum)); 384 //Try transmitting over and over again until the other end doesn't send an 385 //error back. 386 } while ((c = getbyte() & 0x7f) == GDBBadP); 387} 388 389// Receive a packet from gdb 390int 391BaseRemoteGDB::recv(char *bp, int maxlen) 392{ 393 char *p; 394 int c, csum; 395 int len; 396 397 do { 398 p = bp; 399 csum = len = 0; 400 //Find the beginning of a packet 401 while ((c = getbyte()) != GDBStart) 402 ; 403 404 //Read until you find the end of the data in the packet, and keep 405 //track of the check sum. 406 while ((c = getbyte()) != GDBEnd && len < maxlen) { 407 c &= 0x7f; 408 csum += c; 409 *p++ = c; 410 len++; 411 } 412 413 //Mask the check sum, and terminate the command string. 414 csum &= 0xff; 415 *p = '\0'; 416 417 //If the command was too long, report an error. 418 if (len >= maxlen) { 419 putbyte(GDBBadP); 420 continue; 421 } 422 423 //Bring in the checksum. If the check sum matches, csum will be 0. 424 csum -= digit2i(getbyte()) * 16; 425 csum -= digit2i(getbyte()); 426 427 //If the check sum was correct 428 if (csum == 0) { 429 //Report that the packet was received correctly 430 putbyte(GDBGoodP); 431 // Sequence present? 432 if (bp[2] == ':') { 433 putbyte(bp[0]); 434 putbyte(bp[1]); 435 len -= 3; 436 memcpy(bp, bp+3, len); 437 } 438 break; 439 } 440 //Otherwise, report that there was a mistake. 441 putbyte(GDBBadP); 442 } while (1); 443 444 DPRINTF(GDBRecv, "recv: %s: %s\n", gdb_command(*bp), bp); 445 446 return (len); 447} 448 449// Read bytes from kernel address space for debugger. 450bool 451BaseRemoteGDB::read(Addr vaddr, size_t size, char *data) 452{ 453 static Addr lastaddr = 0; 454 static size_t lastsize = 0; 455 456 if (vaddr < 10) { 457 DPRINTF(GDBRead, "read: reading memory location zero!\n"); 458 vaddr = lastaddr + lastsize; 459 } 460 461 DPRINTF(GDBRead, "read: addr=%#x, size=%d", vaddr, size); 462 463#if FULL_SYSTEM 464 VirtualPort *port = context->getVirtPort(); 465#else 466 TranslatingPort *port = context->getMemPort(); 467#endif 468 port->readBlob(vaddr, (uint8_t*)data, size); 469 470#if TRACING_ON 471 if (DTRACE(GDBRead)) { 472 if (DTRACE(GDBExtra)) { 473 char buf[1024]; 474 mem2hex(buf, data, size); 475 DPRINTFNR(": %s\n", buf); 476 } else 477 DPRINTFNR("\n"); 478 } 479#endif 480 481 return true; 482} 483 484// Write bytes to kernel address space for debugger. 485bool 486BaseRemoteGDB::write(Addr vaddr, size_t size, const char *data) 487{ 488 static Addr lastaddr = 0; 489 static size_t lastsize = 0; 490 491 if (vaddr < 10) { 492 DPRINTF(GDBWrite, "write: writing memory location zero!\n"); 493 vaddr = lastaddr + lastsize; 494 } 495 496 if (DTRACE(GDBWrite)) { 497 DPRINTFN("write: addr=%#x, size=%d", vaddr, size); 498 if (DTRACE(GDBExtra)) { 499 char buf[1024]; 500 mem2hex(buf, data, size); 501 DPRINTFNR(": %s\n", buf); 502 } else 503 DPRINTFNR("\n"); 504 } 505#if FULL_SYSTEM 506 VirtualPort *port = context->getVirtPort(); 507#else 508 TranslatingPort *port = context->getMemPort(); 509#endif 510 port->writeBlob(vaddr, (uint8_t*)data, size); 511#if !FULL_SYSTEM 512 delete port; 513#endif 514 515 return true; 516} 517 518PCEventQueue *BaseRemoteGDB::getPcEventQueue() 519{ 520 return &system->pcEventQueue; 521} 522 523BaseRemoteGDB::HardBreakpoint::HardBreakpoint(BaseRemoteGDB *_gdb, Addr pc) 524 : PCEvent(_gdb->getPcEventQueue(), "HardBreakpoint Event", pc), 525 gdb(_gdb), refcount(0) 526{ 527 DPRINTF(GDBMisc, "creating hardware breakpoint at %#x\n", evpc); 528} 529 530void 531BaseRemoteGDB::HardBreakpoint::process(ThreadContext *tc) 532{ 533 DPRINTF(GDBMisc, "handling hardware breakpoint at %#x\n", pc()); 534 535 if (tc == gdb->context) 536 gdb->trap(SIGTRAP); 537} 538 539bool 540BaseRemoteGDB::insertSoftBreak(Addr addr, size_t len) 541{ 542 if (len != sizeof(TheISA::MachInst)) 543 panic("invalid length\n"); 544 545 return insertHardBreak(addr, len); 546} 547 548bool 549BaseRemoteGDB::removeSoftBreak(Addr addr, size_t len) 550{ 551 if (len != sizeof(MachInst)) 552 panic("invalid length\n"); 553 554 return removeHardBreak(addr, len); 555} 556 557bool 558BaseRemoteGDB::insertHardBreak(Addr addr, size_t len) 559{ 560 if (len != sizeof(MachInst)) 561 panic("invalid length\n"); 562 563 DPRINTF(GDBMisc, "inserting hardware breakpoint at %#x\n", addr); 564 565 HardBreakpoint *&bkpt = hardBreakMap[addr]; 566 if (bkpt == 0) 567 bkpt = new HardBreakpoint(this, addr); 568 569 bkpt->refcount++; 570 571 return true; 572} 573 574bool 575BaseRemoteGDB::removeHardBreak(Addr addr, size_t len) 576{ 577 if (len != sizeof(MachInst)) 578 panic("invalid length\n"); 579 580 DPRINTF(GDBMisc, "removing hardware breakpoint at %#x\n", addr); 581 582 break_iter_t i = hardBreakMap.find(addr); 583 if (i == hardBreakMap.end()) 584 return false; 585 586 HardBreakpoint *hbp = (*i).second; 587 if (--hbp->refcount == 0) { 588 delete hbp; 589 hardBreakMap.erase(i); 590 } 591 592 return true; 593} 594 595void 596BaseRemoteGDB::setTempBreakpoint(Addr bkpt) 597{ 598 DPRINTF(GDBMisc, "setTempBreakpoint: addr=%#x\n", bkpt); 599 insertHardBreak(bkpt, sizeof(TheISA::MachInst)); 600} 601 602void 603BaseRemoteGDB::clearTempBreakpoint(Addr &bkpt) 604{ 605 DPRINTF(GDBMisc, "setTempBreakpoint: addr=%#x\n", bkpt); 606 removeHardBreak(bkpt, sizeof(TheISA::MachInst)); 607 bkpt = 0; 608} 609 610const char * 611BaseRemoteGDB::break_type(char c) 612{ 613 switch(c) { 614 case '0': return "software breakpoint"; 615 case '1': return "hardware breakpoint"; 616 case '2': return "write watchpoint"; 617 case '3': return "read watchpoint"; 618 case '4': return "access watchpoint"; 619 default: return "unknown breakpoint/watchpoint"; 620 } 621} 622 623// This function does all command processing for interfacing to a 624// remote gdb. Note that the error codes are ignored by gdb at 625// present, but might eventually become meaningful. (XXX) It might 626// makes sense to use POSIX errno values, because that is what the 627// gdb/remote.c functions want to return. 628bool 629BaseRemoteGDB::trap(int type) 630{ 631 uint64_t val; 632 size_t datalen, len; 633 char data[GDBPacketBufLen + 1]; 634 char *buffer; 635 size_t bufferSize; 636 const char *p; 637 char command, subcmd; 638 string var; 639 bool ret; 640 641 if (!attached) 642 return false; 643 644 bufferSize = gdbregs.bytes() * 2 + 256; 645 buffer = (char*)malloc(bufferSize); 646 647 DPRINTF(GDBMisc, "trap: PC=%#x NPC=%#x\n", 648 context->readPC(), context->readNextPC()); 649 650 clearSingleStep(); 651 652 /* 653 * The first entry to this function is normally through 654 * a breakpoint trap in kgdb_connect(), in which case we 655 * must advance past the breakpoint because gdb will not. 656 * 657 * On the first entry here, we expect that gdb is not yet 658 * listening to us, so just enter the interaction loop. 659 * After the debugger is "active" (connected) it will be 660 * waiting for a "signaled" message from us. 661 */ 662 if (!active) 663 active = true; 664 else 665 // Tell remote host that an exception has occurred. 666 snprintf((char *)buffer, bufferSize, "S%02x", type); 667 send(buffer); 668 669 // Stick frame regs into our reg cache. 670 getregs(); 671 672 for (;;) { 673 datalen = recv(data, sizeof(data)); 674 data[sizeof(data) - 1] = 0; // Sentinel 675 command = data[0]; 676 subcmd = 0; 677 p = data + 1; 678 switch (command) { 679 680 case GDBSignal: 681 // if this command came from a running gdb, answer it -- 682 // the other guy has no way of knowing if we're in or out 683 // of this loop when he issues a "remote-signal". 684 snprintf((char *)buffer, bufferSize, 685 "S%02x", type); 686 send(buffer); 687 continue; 688 689 case GDBRegR: 690 if (2 * gdbregs.bytes() > bufferSize) 691 panic("buffer too small"); 692 693 mem2hex(buffer, gdbregs.regs, gdbregs.bytes()); 694 send(buffer); 695 continue; 696 697 case GDBRegW: 698 p = hex2mem(gdbregs.regs, p, gdbregs.bytes()); 699 if (p == NULL || *p != '\0') 700 send("E01"); 701 else { 702 setregs(); 703 send("OK"); 704 } 705 continue; 706 707#if 0 708 case GDBSetReg: 709 val = hex2i(&p); 710 if (*p++ != '=') { 711 send("E01"); 712 continue; 713 } 714 if (val < 0 && val >= KGDB_NUMREGS) { 715 send("E01"); 716 continue; 717 } 718 719 gdbregs.regs[val] = hex2i(&p); 720 setregs(); 721 send("OK"); 722 723 continue; 724#endif 725 726 case GDBMemR: 727 val = hex2i(&p); 728 if (*p++ != ',') { 729 send("E02"); 730 continue; 731 } 732 len = hex2i(&p); 733 if (*p != '\0') { 734 send("E03"); 735 continue; 736 } 737 if (len > bufferSize) { 738 send("E04"); 739 continue; 740 } 741 if (!acc(val, len)) { 742 send("E05"); 743 continue; 744 } 745 746 if (read(val, (size_t)len, (char *)buffer)) { 747 // variable length array would be nice, but C++ doesn't 748 // officially support those... 749 char *temp = new char[2*len+1]; 750 mem2hex(temp, buffer, len); 751 send(temp); 752 delete [] temp; 753 } else { 754 send("E05"); 755 } 756 continue; 757 758 case GDBMemW: 759 val = hex2i(&p); 760 if (*p++ != ',') { 761 send("E06"); 762 continue; 763 } 764 len = hex2i(&p); 765 if (*p++ != ':') { 766 send("E07"); 767 continue; 768 } 769 if (len > datalen - (p - data)) { 770 send("E08"); 771 continue; 772 } 773 p = hex2mem(buffer, p, bufferSize); 774 if (p == NULL) { 775 send("E09"); 776 continue; 777 } 778 if (!acc(val, len)) { 779 send("E0A"); 780 continue; 781 } 782 if (write(val, (size_t)len, (char *)buffer)) 783 send("OK"); 784 else 785 send("E0B"); 786 continue; 787 788 case GDBSetThread: 789 subcmd = *p++; 790 val = hex2i(&p); 791 if (val == 0) 792 send("OK"); 793 else 794 send("E01"); 795 continue; 796 797 case GDBDetach: 798 case GDBKill: 799 active = false; 800 clearSingleStep(); 801 detach(); 802 goto out; 803 804 case GDBAsyncCont: 805 subcmd = hex2i(&p); 806 if (*p++ == ';') { 807 val = hex2i(&p); 808 context->setPC(val); 809 context->setNextPC(val + sizeof(MachInst)); 810 } 811 clearSingleStep(); 812 goto out; 813 814 case GDBCont: 815 if (p - data < (ptrdiff_t)datalen) { 816 val = hex2i(&p); 817 context->setPC(val); 818 context->setNextPC(val + sizeof(MachInst)); 819 } 820 clearSingleStep(); 821 goto out; 822 823 case GDBAsyncStep: 824 subcmd = hex2i(&p); 825 if (*p++ == ';') { 826 val = hex2i(&p); 827 context->setPC(val); 828 context->setNextPC(val + sizeof(MachInst)); 829 } 830 setSingleStep(); 831 goto out; 832 833 case GDBStep: 834 if (p - data < (ptrdiff_t)datalen) { 835 val = hex2i(&p); 836 context->setPC(val); 837 context->setNextPC(val + sizeof(MachInst)); 838 } 839 setSingleStep(); 840 goto out; 841 842 case GDBClrHwBkpt: 843 subcmd = *p++; 844 if (*p++ != ',') send("E0D"); 845 val = hex2i(&p); 846 if (*p++ != ',') send("E0D"); 847 len = hex2i(&p); 848 849 DPRINTF(GDBMisc, "clear %s, addr=%#x, len=%d\n", 850 break_type(subcmd), val, len); 851 852 ret = false; 853 854 switch (subcmd) { 855 case '0': // software breakpoint 856 ret = removeSoftBreak(val, len); 857 break; 858 859 case '1': // hardware breakpoint 860 ret = removeHardBreak(val, len); 861 break; 862 863 case '2': // write watchpoint 864 case '3': // read watchpoint 865 case '4': // access watchpoint 866 default: // unknown 867 send(""); 868 break; 869 } 870 871 send(ret ? "OK" : "E0C"); 872 continue; 873 874 case GDBSetHwBkpt: 875 subcmd = *p++; 876 if (*p++ != ',') send("E0D"); 877 val = hex2i(&p); 878 if (*p++ != ',') send("E0D"); 879 len = hex2i(&p); 880 881 DPRINTF(GDBMisc, "set %s, addr=%#x, len=%d\n", 882 break_type(subcmd), val, len); 883 884 ret = false; 885 886 switch (subcmd) { 887 case '0': // software breakpoint 888 ret = insertSoftBreak(val, len); 889 break; 890 891 case '1': // hardware breakpoint 892 ret = insertHardBreak(val, len); 893 break; 894 895 case '2': // write watchpoint 896 case '3': // read watchpoint 897 case '4': // access watchpoint 898 default: // unknown 899 send(""); 900 break; 901 } 902 903 send(ret ? "OK" : "E0C"); 904 continue; 905 906 case GDBQueryVar: 907 var = string(p, datalen - 1); 908 if (var == "C") 909 send("QC0"); 910 else 911 send(""); 912 continue; 913 914 case GDBSetBaud: 915 case GDBSetBreak: 916 case GDBDebug: 917 case GDBCycleStep: 918 case GDBSigCycleStep: 919 case GDBReadReg: 920 case GDBSetVar: 921 case GDBReset: 922 case GDBThreadAlive: 923 case GDBTargetExit: 924 case GDBBinaryDload: 925 // Unsupported command 926 DPRINTF(GDBMisc, "Unsupported command: %s\n", 927 gdb_command(command)); 928 DDUMP(GDBMisc, (uint8_t *)data, datalen); 929 send(""); 930 continue; 931 932 default: 933 // Unknown command. 934 DPRINTF(GDBMisc, "Unknown command: %c(%#x)\n", 935 command, command); 936 send(""); 937 continue; 938 939 940 } 941 } 942 943 out: 944 free(buffer); 945 return true; 946} 947 948// Convert a hex digit into an integer. 949// This returns -1 if the argument passed is no valid hex digit. 950int 951BaseRemoteGDB::digit2i(char c) 952{ 953 if (c >= '0' && c <= '9') 954 return (c - '0'); 955 else if (c >= 'a' && c <= 'f') 956 return (c - 'a' + 10); 957 else if (c >= 'A' && c <= 'F') 958 959 return (c - 'A' + 10); 960 else 961 return (-1); 962} 963 964// Convert the low 4 bits of an integer into an hex digit. 965char 966BaseRemoteGDB::i2digit(int n) 967{ 968 return ("0123456789abcdef"[n & 0x0f]); 969} 970 971// Convert a byte array into an hex string. 972void 973BaseRemoteGDB::mem2hex(void *vdst, const void *vsrc, int len) 974{ 975 char *dst = (char *)vdst; 976 const char *src = (const char *)vsrc; 977 978 while (len--) { 979 *dst++ = i2digit(*src >> 4); 980 *dst++ = i2digit(*src++); 981 } 982 *dst = '\0'; 983} 984 985// Convert an hex string into a byte array. 986// This returns a pointer to the character following the last valid 987// hex digit. If the string ends in the middle of a byte, NULL is 988// returned. 989const char * 990BaseRemoteGDB::hex2mem(void *vdst, const char *src, int maxlen) 991{ 992 char *dst = (char *)vdst; 993 int msb, lsb; 994 995 while (*src && maxlen--) { 996 msb = digit2i(*src++); 997 if (msb < 0) 998 return (src - 1); 999 lsb = digit2i(*src++); 1000 if (lsb < 0) 1001 return (NULL); 1002 *dst++ = (msb << 4) | lsb; 1003 } 1004 return (src); 1005} 1006 1007// Convert an hex string into an integer. 1008// This returns a pointer to the character following the last valid 1009// hex digit. 1010Addr 1011BaseRemoteGDB::hex2i(const char **srcp) 1012{ 1013 const char *src = *srcp; 1014 Addr r = 0; 1015 int nibble; 1016 1017 while ((nibble = digit2i(*src)) >= 0) { 1018 r *= 16; 1019 r += nibble; 1020 src++; 1021 } 1022 *srcp = src; 1023 return (r); 1024} 1025 1026