faults.cc revision 6222
1/* 2 * Copyright (c) 2003-2007 The Regents of The University of Michigan 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are 7 * met: redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer; 9 * redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution; 12 * neither the name of the copyright holders nor the names of its 13 * contributors may be used to endorse or promote products derived from 14 * this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * Authors: Gabe Black 29 */ 30 31/* 32 * Copyright (c) 2007 The Hewlett-Packard Development Company 33 * All rights reserved. 34 * 35 * Redistribution and use of this software in source and binary forms, 36 * with or without modification, are permitted provided that the 37 * following conditions are met: 38 * 39 * The software must be used only for Non-Commercial Use which means any 40 * use which is NOT directed to receiving any direct monetary 41 * compensation for, or commercial advantage from such use. Illustrative 42 * examples of non-commercial use are academic research, personal study, 43 * teaching, education and corporate research & development. 44 * Illustrative examples of commercial use are distributing products for 45 * commercial advantage and providing services using the software for 46 * commercial advantage. 47 * 48 * If you wish to use this software or functionality therein that may be 49 * covered by patents for commercial use, please contact: 50 * Director of Intellectual Property Licensing 51 * Office of Strategy and Technology 52 * Hewlett-Packard Company 53 * 1501 Page Mill Road 54 * Palo Alto, California 94304 55 * 56 * Redistributions of source code must retain the above copyright notice, 57 * this list of conditions and the following disclaimer. Redistributions 58 * in binary form must reproduce the above copyright notice, this list of 59 * conditions and the following disclaimer in the documentation and/or 60 * other materials provided with the distribution. Neither the name of 61 * the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its 62 * contributors may be used to endorse or promote products derived from 63 * this software without specific prior written permission. No right of 64 * sublicense is granted herewith. Derivatives of the software and 65 * output created using the software may be prepared, but only for 66 * Non-Commercial Uses. Derivatives of the software may be shared with 67 * others provided: (i) the others agree to abide by the list of 68 * conditions herein which includes the Non-Commercial Use restrictions; 69 * and (ii) such Derivatives of the software include the above copyright 70 * notice to acknowledge the contribution from this software where 71 * applicable, this list of conditions and the disclaimer below. 72 * 73 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 74 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 75 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 76 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 77 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 78 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 79 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 80 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 81 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 82 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 83 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 84 * 85 * Authors: Gabe Black 86 */ 87 88#include "arch/x86/decoder.hh" 89#include "arch/x86/faults.hh" 90#include "base/trace.hh" 91#include "config/full_system.hh" 92#include "cpu/thread_context.hh" 93#if !FULL_SYSTEM 94#include "arch/x86/isa_traits.hh" 95#include "mem/page_table.hh" 96#include "sim/process.hh" 97#else 98#include "arch/x86/tlb.hh" 99#endif 100 101namespace X86ISA 102{ 103#if FULL_SYSTEM 104 void X86FaultBase::invoke(ThreadContext * tc) 105 { 106 Addr pc = tc->readPC(); 107 DPRINTF(Faults, "RIP %#x: vector %d: %s\n", pc, vector, describe()); 108 using namespace X86ISAInst::RomLabels; 109 HandyM5Reg m5reg = tc->readMiscRegNoEffect(MISCREG_M5_REG); 110 MicroPC entry; 111 if (m5reg.mode == LongMode) { 112 if (isSoft()) { 113 entry = extern_label_longModeSoftInterrupt; 114 } else { 115 entry = extern_label_longModeInterrupt; 116 } 117 } else { 118 entry = extern_label_legacyModeInterrupt; 119 } 120 tc->setIntReg(INTREG_MICRO(1), vector); 121 tc->setIntReg(INTREG_MICRO(7), pc); 122 if (errorCode != (uint64_t)(-1)) { 123 if (m5reg.mode == LongMode) { 124 entry = extern_label_longModeInterruptWithError; 125 } else { 126 panic("Legacy mode interrupts with error codes " 127 "aren't implementde.\n"); 128 } 129 // Software interrupts shouldn't have error codes. If one does, 130 // there would need to be microcode to set it up. 131 assert(!isSoft()); 132 tc->setIntReg(INTREG_MICRO(15), errorCode); 133 } 134 tc->setMicroPC(romMicroPC(entry)); 135 tc->setNextMicroPC(romMicroPC(entry) + 1); 136 } 137 138 std::string 139 X86FaultBase::describe() const 140 { 141 std::stringstream ss; 142 ccprintf(ss, "%s", mnemonic()); 143 if (errorCode != (uint64_t)(-1)) { 144 ccprintf(ss, "(%#x)", errorCode); 145 } 146 147 return ss.str(); 148 } 149 150 void X86Trap::invoke(ThreadContext * tc) 151 { 152 X86FaultBase::invoke(tc); 153 // This is the same as a fault, but it happens -after- the instruction. 154 tc->setPC(tc->readNextPC()); 155 tc->setNextPC(tc->readNextNPC()); 156 tc->setNextNPC(tc->readNextNPC() + sizeof(MachInst)); 157 } 158 159 void X86Abort::invoke(ThreadContext * tc) 160 { 161 panic("Abort exception!"); 162 } 163 164 void PageFault::invoke(ThreadContext * tc) 165 { 166 HandyM5Reg m5reg = tc->readMiscRegNoEffect(MISCREG_M5_REG); 167 X86FaultBase::invoke(tc); 168 /* 169 * If something bad happens while trying to enter the page fault 170 * handler, I'm pretty sure that's a double fault and then all bets are 171 * off. That means it should be safe to update this state now. 172 */ 173 if (m5reg.mode == LongMode) { 174 tc->setMiscReg(MISCREG_CR2, addr); 175 } else { 176 tc->setMiscReg(MISCREG_CR2, (uint32_t)addr); 177 } 178 } 179 180 std::string 181 PageFault::describe() const 182 { 183 std::stringstream ss; 184 ccprintf(ss, "%s at %#x", X86FaultBase::describe(), addr); 185 return ss.str(); 186 } 187 188 void 189 InitInterrupt::invoke(ThreadContext *tc) 190 { 191 DPRINTF(Faults, "Init interrupt.\n"); 192 // The otherwise unmodified integer registers should be set to 0. 193 for (int index = 0; index < NUM_INTREGS; index++) { 194 tc->setIntReg(index, 0); 195 } 196 197 CR0 cr0 = tc->readMiscReg(MISCREG_CR0); 198 CR0 newCR0 = 1 << 4; 199 newCR0.cd = cr0.cd; 200 newCR0.nw = cr0.nw; 201 tc->setMiscReg(MISCREG_CR0, newCR0); 202 tc->setMiscReg(MISCREG_CR2, 0); 203 tc->setMiscReg(MISCREG_CR3, 0); 204 tc->setMiscReg(MISCREG_CR4, 0); 205 206 tc->setMiscReg(MISCREG_RFLAGS, 0x0000000000000002ULL); 207 208 tc->setMiscReg(MISCREG_EFER, 0); 209 210 SegAttr dataAttr = 0; 211 dataAttr.dpl = 0; 212 dataAttr.unusable = 0; 213 dataAttr.defaultSize = 0; 214 dataAttr.longMode = 0; 215 dataAttr.avl = 0; 216 dataAttr.granularity = 0; 217 dataAttr.present = 1; 218 dataAttr.type = 3; 219 dataAttr.writable = 1; 220 dataAttr.readable = 1; 221 dataAttr.expandDown = 0; 222 dataAttr.system = 1; 223 224 for (int seg = 0; seg != NUM_SEGMENTREGS; seg++) { 225 tc->setMiscReg(MISCREG_SEG_SEL(seg), 0); 226 tc->setMiscReg(MISCREG_SEG_BASE(seg), 0); 227 tc->setMiscReg(MISCREG_SEG_EFF_BASE(seg), 0); 228 tc->setMiscReg(MISCREG_SEG_LIMIT(seg), 0xffff); 229 tc->setMiscReg(MISCREG_SEG_ATTR(seg), dataAttr); 230 } 231 232 SegAttr codeAttr = 0; 233 codeAttr.dpl = 0; 234 codeAttr.unusable = 0; 235 codeAttr.defaultSize = 0; 236 codeAttr.longMode = 0; 237 codeAttr.avl = 0; 238 codeAttr.granularity = 0; 239 codeAttr.present = 1; 240 codeAttr.type = 10; 241 codeAttr.writable = 0; 242 codeAttr.readable = 1; 243 codeAttr.expandDown = 0; 244 codeAttr.system = 1; 245 246 tc->setMiscReg(MISCREG_CS, 0xf000); 247 tc->setMiscReg(MISCREG_CS_BASE, 248 0x00000000ffff0000ULL); 249 tc->setMiscReg(MISCREG_CS_EFF_BASE, 250 0x00000000ffff0000ULL); 251 // This has the base value pre-added. 252 tc->setMiscReg(MISCREG_CS_LIMIT, 0xffffffff); 253 tc->setMiscReg(MISCREG_CS_ATTR, codeAttr); 254 255 tc->setPC(0x000000000000fff0ULL + 256 tc->readMiscReg(MISCREG_CS_BASE)); 257 tc->setNextPC(tc->readPC() + sizeof(MachInst)); 258 259 tc->setMiscReg(MISCREG_TSG_BASE, 0); 260 tc->setMiscReg(MISCREG_TSG_LIMIT, 0xffff); 261 262 tc->setMiscReg(MISCREG_IDTR_BASE, 0); 263 tc->setMiscReg(MISCREG_IDTR_LIMIT, 0xffff); 264 265 tc->setMiscReg(MISCREG_TSL, 0); 266 tc->setMiscReg(MISCREG_TSL_BASE, 0); 267 tc->setMiscReg(MISCREG_TSL_LIMIT, 0xffff); 268 tc->setMiscReg(MISCREG_TSL_ATTR, 0); 269 270 tc->setMiscReg(MISCREG_TR, 0); 271 tc->setMiscReg(MISCREG_TR_BASE, 0); 272 tc->setMiscReg(MISCREG_TR_LIMIT, 0xffff); 273 tc->setMiscReg(MISCREG_TR_ATTR, 0); 274 275 // This value should be the family/model/stepping of the processor. 276 // (page 418). It should be consistent with the value from CPUID, but 277 // the actual value probably doesn't matter much. 278 tc->setIntReg(INTREG_RDX, 0); 279 280 tc->setMiscReg(MISCREG_DR0, 0); 281 tc->setMiscReg(MISCREG_DR1, 0); 282 tc->setMiscReg(MISCREG_DR2, 0); 283 tc->setMiscReg(MISCREG_DR3, 0); 284 285 tc->setMiscReg(MISCREG_DR6, 0x00000000ffff0ff0ULL); 286 tc->setMiscReg(MISCREG_DR7, 0x0000000000000400ULL); 287 288 // Update the handy M5 Reg. 289 tc->setMiscReg(MISCREG_M5_REG, 0); 290 MicroPC entry = X86ISAInst::RomLabels::extern_label_initIntHalt; 291 tc->setMicroPC(romMicroPC(entry)); 292 tc->setNextMicroPC(romMicroPC(entry) + 1); 293 } 294 295 void 296 StartupInterrupt::invoke(ThreadContext *tc) 297 { 298 DPRINTF(Faults, "Startup interrupt with vector %#x.\n", vector); 299 HandyM5Reg m5Reg = tc->readMiscReg(MISCREG_M5_REG); 300 if (m5Reg.mode != LegacyMode || m5Reg.submode != RealMode) { 301 panic("Startup IPI recived outside of real mode. " 302 "Don't know what to do. %d, %d", m5Reg.mode, m5Reg.submode); 303 } 304 305 tc->setMiscReg(MISCREG_CS, vector << 8); 306 tc->setMiscReg(MISCREG_CS_BASE, vector << 12); 307 tc->setMiscReg(MISCREG_CS_EFF_BASE, vector << 12); 308 // This has the base value pre-added. 309 tc->setMiscReg(MISCREG_CS_LIMIT, 0xffff); 310 311 tc->setPC(tc->readMiscReg(MISCREG_CS_BASE)); 312 tc->setNextPC(tc->readPC() + sizeof(MachInst)); 313 } 314 315#endif 316} // namespace X86ISA 317 318