xref: /gem5/src/arch/isa_parser.py

# Copyright (c) 2003-2005 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Steve Reinhardt

import os
import sys
import re
import string
import inspect, traceback
# get type names
from types import *

from m5.util.grammar import Grammar

###################
# Utility functions

#
# Indent every line in string 's' by two spaces
# (except preprocessor directives).
# Used to make nested code blocks look pretty.
#
def indent(s):
    return re.sub(r'(?m)^(?!#)', '  ', s)

#
# Munge a somewhat arbitrarily formatted piece of Python code
# (e.g. from a format 'let' block) into something whose indentation
# will get by the Python parser.
#
# The two keys here are that Python will give a syntax error if
# there's any whitespace at the beginning of the first line, and that
# all lines at the same lexical nesting level must have identical
# indentation.  Unfortunately the way code literals work, an entire
# let block tends to have some initial indentation.  Rather than
# trying to figure out what that is and strip it off, we prepend 'if
# 1:' to make the let code the nested block inside the if (and have
# the parser automatically deal with the indentation for us).
#
# We don't want to do this if (1) the code block is empty or (2) the
# first line of the block doesn't have any whitespace at the front.

def fixPythonIndentation(s):
    # get rid of blank lines first
    s = re.sub(r'(?m)^\s*\n', '', s);
    if (s != '' and re.match(r'[ \t]', s[0])):
        s = 'if 1:\n' + s
    return s

class ISAParserError(Exception):
    """Error handler for parser errors"""
    def __init__(self, first, second=None):
        if second is None:
            self.lineno = 0
            self.string = first
        else:
            if hasattr(first, 'lexer'):
                first = first.lexer.lineno
            self.lineno = first
            self.string = second

    def display(self, filename_stack, print_traceback=False):
        # Output formatted to work under Emacs compile-mode.  Optional
        # 'print_traceback' arg, if set to True, prints a Python stack
        # backtrace too (can be handy when trying to debug the parser
        # itself).

        spaces = ""
        for (filename, line) in filename_stack[:-1]:
            print "%sIn file included from %s:" % (spaces, filename)
            spaces += "  "

        # Print a Python stack backtrace if requested.
        if print_traceback or not self.lineno:
            traceback.print_exc()

        line_str = "%s:" % (filename_stack[-1][0], )
        if self.lineno:
            line_str += "%d:" % (self.lineno, )

        return "%s%s %s" % (spaces, line_str, self.string)

    def exit(self, filename_stack, print_traceback=False):
        # Just call exit.

        sys.exit(self.display(filename_stack, print_traceback))

def error(*args):
    raise ISAParserError(*args)

####################
# Template objects.
#
# Template objects are format strings that allow substitution from
# the attribute spaces of other objects (e.g. InstObjParams instances).

labelRE = re.compile(r'(?<!%)%\(([^\)]+)\)[sd]')

class Template(object):
    def __init__(self, t):
        self.template = t

    def subst(self, d):
        myDict = None

        # Protect non-Python-dict substitutions (e.g. if there's a printf
        # in the templated C++ code)
        template = protect_non_subst_percents(self.template)
        # CPU-model-specific substitutions are handled later (in GenCode).
        template = protect_cpu_symbols(template)

        # Build a dict ('myDict') to use for the template substitution.
        # Start with the template namespace.  Make a copy since we're
        # going to modify it.
        myDict = parser.templateMap.copy()

        if isinstance(d, InstObjParams):
            # If we're dealing with an InstObjParams object, we need
            # to be a little more sophisticated.  The instruction-wide
            # parameters are already formed, but the parameters which
            # are only function wide still need to be generated.
            compositeCode = ''

            myDict.update(d.__dict__)
            # The "operands" and "snippets" attributes of the InstObjParams
            # objects are for internal use and not substitution.
            del myDict['operands']
            del myDict['snippets']

            snippetLabels = [l for l in labelRE.findall(template)
                             if d.snippets.has_key(l)]

            snippets = dict([(s, mungeSnippet(d.snippets[s]))
                             for s in snippetLabels])

            myDict.update(snippets)

            compositeCode = ' '.join(map(str, snippets.values()))

            # Add in template itself in case it references any
            # operands explicitly (like Mem)
            compositeCode += ' ' + template

            operands = SubOperandList(compositeCode, d.operands)

            myDict['op_decl'] = operands.concatAttrStrings('op_decl')

            is_src = lambda op: op.is_src
            is_dest = lambda op: op.is_dest

            myDict['op_src_decl'] = \
                      operands.concatSomeAttrStrings(is_src, 'op_src_decl')
            myDict['op_dest_decl'] = \
                      operands.concatSomeAttrStrings(is_dest, 'op_dest_decl')

            myDict['op_rd'] = operands.concatAttrStrings('op_rd')
            myDict['op_wb'] = operands.concatAttrStrings('op_wb')

            if d.operands.memOperand:
                myDict['mem_acc_size'] = d.operands.memOperand.mem_acc_size
                myDict['mem_acc_type'] = d.operands.memOperand.mem_acc_type

        elif isinstance(d, dict):
            # if the argument is a dictionary, we just use it.
            myDict.update(d)
        elif hasattr(d, '__dict__'):
            # if the argument is an object, we use its attribute map.
            myDict.update(d.__dict__)
        else:
            raise TypeError, "Template.subst() arg must be or have dictionary"
        return template % myDict

    # Convert to string.  This handles the case when a template with a
    # CPU-specific term gets interpolated into another template or into
    # an output block.
    def __str__(self):
        return expand_cpu_symbols_to_string(self.template)

################
# Format object.
#
# A format object encapsulates an instruction format.  It must provide
# a defineInst() method that generates the code for an instruction
# definition.

exportContextSymbols = ('InstObjParams', 'makeList', 're', 'string')

exportContext = {}

def updateExportContext():
    exportContext.update(exportDict(*exportContextSymbols))
    exportContext.update(parser.templateMap)

def exportDict(*symNames):
    return dict([(s, eval(s)) for s in symNames])


class Format(object):
    def __init__(self, id, params, code):
        # constructor: just save away arguments
        self.id = id
        self.params = params
        label = 'def format ' + id
        self.user_code = compile(fixPythonIndentation(code), label, 'exec')
        param_list = string.join(params, ", ")
        f = '''def defInst(_code, _context, %s):
                my_locals = vars().copy()
                exec _code in _context, my_locals
                return my_locals\n''' % param_list
        c = compile(f, label + ' wrapper', 'exec')
        exec c
        self.func = defInst

    def defineInst(self, name, args, lineno):
        context = {}
        updateExportContext()
        context.update(exportContext)
        if len(name):
            Name = name[0].upper()
            if len(name) > 1:
                Name += name[1:]
        context.update({ 'name': name, 'Name': Name })
        try:
            vars = self.func(self.user_code, context, *args[0], **args[1])
        except Exception, exc:
            error(lineno, 'error defining "%s": %s.' % (name, exc))
        for k in vars.keys():
            if k not in ('header_output', 'decoder_output',
                         'exec_output', 'decode_block'):
                del vars[k]
        return GenCode(**vars)

# Special null format to catch an implicit-format instruction
# definition outside of any format block.
class NoFormat(object):
    def __init__(self):
        self.defaultInst = ''

    def defineInst(self, name, args, lineno):
        error(lineno,
              'instruction definition "%s" with no active format!' % name)

# This dictionary maps format name strings to Format objects.
formatMap = {}

# Define a new format
def defFormat(id, params, code, lineno):
    # make sure we haven't already defined this one
    if formatMap.get(id, None) != None:
        error(lineno, 'format %s redefined.' % id)
    # create new object and store in global map
    formatMap[id] = Format(id, params, code)

#####################################################################
#
#                           Support Classes
#
#####################################################################

# Expand template with CPU-specific references into a dictionary with
# an entry for each CPU model name.  The entry key is the model name
# and the corresponding value is the template with the CPU-specific
# refs substituted for that model.
def expand_cpu_symbols_to_dict(template):
    # Protect '%'s that don't go with CPU-specific terms
    t = re.sub(r'%(?!\(CPU_)', '%%', template)
    result = {}
    for cpu in cpu_models:
        result[cpu.name] = t % cpu.strings
    return result

# *If* the template has CPU-specific references, return a single
# string containing a copy of the template for each CPU model with the
# corresponding values substituted in.  If the template has no
# CPU-specific references, it is returned unmodified.
def expand_cpu_symbols_to_string(template):
    if template.find('%(CPU_') != -1:
        return reduce(lambda x,y: x+y,
                      expand_cpu_symbols_to_dict(template).values())
    else:
        return template

# Protect CPU-specific references by doubling the corresponding '%'s
# (in preparation for substituting a different set of references into
# the template).
def protect_cpu_symbols(template):
    return re.sub(r'%(?=\(CPU_)', '%%', template)

# Protect any non-dict-substitution '%'s in a format string
# (i.e. those not followed by '(')
def protect_non_subst_percents(s):
    return re.sub(r'%(?!\()', '%%', s)

###############
# GenCode class
#
# The GenCode class encapsulates generated code destined for various
# output files.  The header_output and decoder_output attributes are
# strings containing code destined for decoder.hh and decoder.cc
# respectively.  The decode_block attribute contains code to be
# incorporated in the decode function itself (that will also end up in
# decoder.cc).  The exec_output attribute is a dictionary with a key
# for each CPU model name; the value associated with a particular key
# is the string of code for that CPU model's exec.cc file.  The
# has_decode_default attribute is used in the decode block to allow
# explicit default clauses to override default default clauses.

class GenCode(object):
    # Constructor.  At this point we substitute out all CPU-specific
    # symbols.  For the exec output, these go into the per-model
    # dictionary.  For all other output types they get collapsed into
    # a single string.
    def __init__(self,
                 header_output = '', decoder_output = '', exec_output = '',
                 decode_block = '', has_decode_default = False):
        self.header_output = expand_cpu_symbols_to_string(header_output)
        self.decoder_output = expand_cpu_symbols_to_string(decoder_output)
        if isinstance(exec_output, dict):
            self.exec_output = exec_output
        elif isinstance(exec_output, str):
            # If the exec_output arg is a single string, we replicate
            # it for each of the CPU models, substituting and
            # %(CPU_foo)s params appropriately.
            self.exec_output = expand_cpu_symbols_to_dict(exec_output)
        self.decode_block = expand_cpu_symbols_to_string(decode_block)
        self.has_decode_default = has_decode_default

    # Override '+' operator: generate a new GenCode object that
    # concatenates all the individual strings in the operands.
    def __add__(self, other):
        exec_output = {}
        for cpu in cpu_models:
            n = cpu.name
            exec_output[n] = self.exec_output[n] + other.exec_output[n]
        return GenCode(self.header_output + other.header_output,
                       self.decoder_output + other.decoder_output,
                       exec_output,
                       self.decode_block + other.decode_block,
                       self.has_decode_default or other.has_decode_default)

    # Prepend a string (typically a comment) to all the strings.
    def prepend_all(self, pre):
        self.header_output = pre + self.header_output
        self.decoder_output  = pre + self.decoder_output
        self.decode_block = pre + self.decode_block
        for cpu in cpu_models:
            self.exec_output[cpu.name] = pre + self.exec_output[cpu.name]

    # Wrap the decode block in a pair of strings (e.g., 'case foo:'
    # and 'break;').  Used to build the big nested switch statement.
    def wrap_decode_block(self, pre, post = ''):
        self.decode_block = pre + indent(self.decode_block) + post

#####################################################################
#
#                      Bitfield Operator Support
#
#####################################################################

bitOp1ArgRE = re.compile(r'<\s*(\w+)\s*:\s*>')

bitOpWordRE = re.compile(r'(?<![\w\.])([\w\.]+)<\s*(\w+)\s*:\s*(\w+)\s*>')
bitOpExprRE = re.compile(r'\)<\s*(\w+)\s*:\s*(\w+)\s*>')

def substBitOps(code):
    # first convert single-bit selectors to two-index form
    # i.e., <n> --> <n:n>
    code = bitOp1ArgRE.sub(r'<\1:\1>', code)
    # simple case: selector applied to ID (name)
    # i.e., foo<a:b> --> bits(foo, a, b)
    code = bitOpWordRE.sub(r'bits(\1, \2, \3)', code)
    # if selector is applied to expression (ending in ')'),
    # we need to search backward for matching '('
    match = bitOpExprRE.search(code)
    while match:
        exprEnd = match.start()
        here = exprEnd - 1
        nestLevel = 1
        while nestLevel > 0:
            if code[here] == '(':
                nestLevel -= 1
            elif code[here] == ')':
                nestLevel += 1
            here -= 1
            if here < 0:
                sys.exit("Didn't find '('!")
        exprStart = here+1
        newExpr = r'bits(%s, %s, %s)' % (code[exprStart:exprEnd+1],
                                         match.group(1), match.group(2))
        code = code[:exprStart] + newExpr + code[match.end():]
        match = bitOpExprRE.search(code)
    return code


#####################################################################
#
#                             Code Parser
#
# The remaining code is the support for automatically extracting
# instruction characteristics from pseudocode.
#
#####################################################################

# Force the argument to be a list.  Useful for flags, where a caller
# can specify a singleton flag or a list of flags.  Also usful for
# converting tuples to lists so they can be modified.
def makeList(arg):
    if isinstance(arg, list):
        return arg
    elif isinstance(arg, tuple):
        return list(arg)
    elif not arg:
        return []
    else:
        return [ arg ]

# Generate operandTypeMap from the user's 'def operand_types'
# statement.
def buildOperandTypeMap(user_dict, lineno):
    global operandTypeMap
    operandTypeMap = {}
    for (ext, (desc, size)) in user_dict.iteritems():
        if desc == 'signed int':
            ctype = 'int%d_t' % size
            is_signed = 1
        elif desc == 'unsigned int':
            ctype = 'uint%d_t' % size
            is_signed = 0
        elif desc == 'float':
            is_signed = 1       # shouldn't really matter
            if size == 32:
                ctype = 'float'
            elif size == 64:
                ctype = 'double'
        elif desc == 'twin64 int':
            is_signed = 0
            ctype = 'Twin64_t'
        elif desc == 'twin32 int':
            is_signed = 0
            ctype = 'Twin32_t'
        if ctype == '':
            error(lineno, 'Unrecognized type description "%s" in user_dict')
        operandTypeMap[ext] = (size, ctype, is_signed)

class Operand(object):
    '''Base class for operand descriptors.  An instance of this class
    (or actually a class derived from this one) represents a specific
    operand for a code block (e.g, "Rc.sq" as a dest). Intermediate
    derived classes encapsulates the traits of a particular operand
    type (e.g., "32-bit integer register").'''

    def buildReadCode(self, func = None):
        code = self.read_code % {"name": self.base_name,
                                 "func": func,
                                 "op_idx": self.src_reg_idx,
                                 "reg_idx": self.reg_spec,
                                 "size": self.size,
                                 "ctype": self.ctype}
        if self.size != self.dflt_size:
            return '%s = bits(%s, %d, 0);\n' % \
                   (self.base_name, code, self.size-1)
        else:
            return '%s = %s;\n' % \
                   (self.base_name, code)

    def buildWriteCode(self, func = None):
        if (self.size != self.dflt_size and self.is_signed):
            final_val = 'sext<%d>(%s)' % (self.size, self.base_name)
        else:
            final_val = self.base_name
        code = self.write_code % {"name": self.base_name,
                                  "func": func,
                                  "op_idx": self.dest_reg_idx,
                                  "reg_idx": self.reg_spec,
                                  "size": self.size,
                                  "ctype": self.ctype,
                                  "final_val": final_val}
        return '''
        {
            %s final_val = %s;
            %s;
            if (traceData) { traceData->setData(final_val); }
        }''' % (self.dflt_ctype, final_val, code)

    def __init__(self, full_name, ext, is_src, is_dest):
        self.full_name = full_name
        self.ext = ext
        self.is_src = is_src
        self.is_dest = is_dest
        # The 'effective extension' (eff_ext) is either the actual
        # extension, if one was explicitly provided, or the default.
        if ext:
            self.eff_ext = ext
        else:
            self.eff_ext = self.dflt_ext

        (self.size, self.ctype, self.is_signed) = operandTypeMap[self.eff_ext]

        # note that mem_acc_size is undefined for non-mem operands...
        # template must be careful not to use it if it doesn't apply.
        if self.isMem():
            self.mem_acc_size = self.makeAccSize()
            if self.ctype in ['Twin32_t', 'Twin64_t']:
                self.mem_acc_type = 'Twin'
            else:
                self.mem_acc_type = 'uint'

    # Finalize additional fields (primarily code fields).  This step
    # is done separately since some of these fields may depend on the
    # register index enumeration that hasn't been performed yet at the
    # time of __init__().
    def finalize(self):
        self.flags = self.getFlags()
        self.constructor = self.makeConstructor()
        self.op_decl = self.makeDecl()

        if self.is_src:
            self.op_rd = self.makeRead()
            self.op_src_decl = self.makeDecl()
        else:
            self.op_rd = ''
            self.op_src_decl = ''

        if self.is_dest:
            self.op_wb = self.makeWrite()
            self.op_dest_decl = self.makeDecl()
        else:
            self.op_wb = ''
            self.op_dest_decl = ''

    def isMem(self):
        return 0

    def isReg(self):
        return 0

    def isFloatReg(self):
        return 0

    def isIntReg(self):
        return 0

    def isControlReg(self):
        return 0

    def getFlags(self):
        # note the empty slice '[:]' gives us a copy of self.flags[0]
        # instead of a reference to it
        my_flags = self.flags[0][:]
        if self.is_src:
            my_flags += self.flags[1]
        if self.is_dest:
            my_flags += self.flags[2]
        return my_flags

    def makeDecl(self):
        # Note that initializations in the declarations are solely
        # to avoid 'uninitialized variable' errors from the compiler.
        return self.ctype + ' ' + self.base_name + ' = 0;\n';

class IntRegOperand(Operand):
    def isReg(self):
        return 1

    def isIntReg(self):
        return 1

    def makeConstructor(self):
        c = ''
        if self.is_src:
            c += '\n\t_srcRegIdx[%d] = %s;' % \
                 (self.src_reg_idx, self.reg_spec)
        if self.is_dest:
            c += '\n\t_destRegIdx[%d] = %s;' % \
                 (self.dest_reg_idx, self.reg_spec)
        return c

    def makeRead(self):
        if (self.ctype == 'float' or self.ctype == 'double'):
            error('Attempt to read integer register as FP')
        if self.read_code != None:
            return self.buildReadCode('readIntRegOperand')
        if (self.size == self.dflt_size):
            return '%s = xc->readIntRegOperand(this, %d);\n' % \
                   (self.base_name, self.src_reg_idx)
        elif (self.size > self.dflt_size):
            int_reg_val = 'xc->readIntRegOperand(this, %d)' % \
                          (self.src_reg_idx)
            if (self.is_signed):
                int_reg_val = 'sext<%d>(%s)' % (self.dflt_size, int_reg_val)
            return '%s = %s;\n' % (self.base_name, int_reg_val)
        else:
            return '%s = bits(xc->readIntRegOperand(this, %d), %d, 0);\n' % \
                   (self.base_name, self.src_reg_idx, self.size-1)

    def makeWrite(self):
        if (self.ctype == 'float' or self.ctype == 'double'):
            error('Attempt to write integer register as FP')
        if self.write_code != None:
            return self.buildWriteCode('setIntRegOperand')
        if (self.size != self.dflt_size and self.is_signed):
            final_val = 'sext<%d>(%s)' % (self.size, self.base_name)
        else:
            final_val = self.base_name
        wb = '''
        {
            %s final_val = %s;
            xc->setIntRegOperand(this, %d, final_val);\n
            if (traceData) { traceData->setData(final_val); }
        }''' % (self.dflt_ctype, final_val, self.dest_reg_idx)
        return wb

class FloatRegOperand(Operand):
    def isReg(self):
        return 1

    def isFloatReg(self):
        return 1

    def makeConstructor(self):
        c = ''
        if self.is_src:
            c += '\n\t_srcRegIdx[%d] = %s + FP_Base_DepTag;' % \
                 (self.src_reg_idx, self.reg_spec)
        if self.is_dest:
            c += '\n\t_destRegIdx[%d] = %s + FP_Base_DepTag;' % \
                 (self.dest_reg_idx, self.reg_spec)
        return c

    def makeRead(self):
        bit_select = 0
        if (self.ctype == 'float' or self.ctype == 'double'):
            func = 'readFloatRegOperand'
        else:
            func = 'readFloatRegOperandBits'
            if (self.size != self.dflt_size):
                bit_select = 1
        base = 'xc->%s(this, %d)' % (func, self.src_reg_idx)
        if self.read_code != None:
            return self.buildReadCode(func)
        if bit_select:
            return '%s = bits(%s, %d, 0);\n' % \
                   (self.base_name, base, self.size-1)
        else:
            return '%s = %s;\n' % (self.base_name, base)

    def makeWrite(self):
        final_val = self.base_name
        final_ctype = self.ctype
        if (self.ctype == 'float' or self.ctype == 'double'):
            func = 'setFloatRegOperand'
        elif (self.ctype == 'uint32_t' or self.ctype == 'uint64_t'):
            func = 'setFloatRegOperandBits'
        else:
            func = 'setFloatRegOperandBits'
            final_ctype = 'uint%d_t' % self.dflt_size
            if (self.size != self.dflt_size and self.is_signed):
                final_val = 'sext<%d>(%s)' % (self.size, self.base_name)
        if self.write_code != None:
            return self.buildWriteCode(func)
        wb = '''
        {
            %s final_val = %s;
            xc->%s(this, %d, final_val);\n
            if (traceData) { traceData->setData(final_val); }
        }''' % (final_ctype, final_val, func, self.dest_reg_idx)
        return wb

class ControlRegOperand(Operand):
    def isReg(self):
        return 1

    def isControlReg(self):
        return 1

    def makeConstructor(self):
        c = ''
        if self.is_src:
            c += '\n\t_srcRegIdx[%d] = %s + Ctrl_Base_DepTag;' % \
                 (self.src_reg_idx, self.reg_spec)
        if self.is_dest:
            c += '\n\t_destRegIdx[%d] = %s + Ctrl_Base_DepTag;' % \
                 (self.dest_reg_idx, self.reg_spec)
        return c

    def makeRead(self):
        bit_select = 0
        if (self.ctype == 'float' or self.ctype == 'double'):
            error('Attempt to read control register as FP')
        if self.read_code != None:
            return self.buildReadCode('readMiscRegOperand')
        base = 'xc->readMiscRegOperand(this, %s)' % self.src_reg_idx
        if self.size == self.dflt_size:
            return '%s = %s;\n' % (self.base_name, base)
        else:
            return '%s = bits(%s, %d, 0);\n' % \
                   (self.base_name, base, self.size-1)

    def makeWrite(self):
        if (self.ctype == 'float' or self.ctype == 'double'):
            error('Attempt to write control register as FP')
        if self.write_code != None:
            return self.buildWriteCode('setMiscRegOperand')
        wb = 'xc->setMiscRegOperand(this, %s, %s);\n' % \
             (self.dest_reg_idx, self.base_name)
        wb += 'if (traceData) { traceData->setData(%s); }' % \
              self.base_name
        return wb

class MemOperand(Operand):
    def isMem(self):
        return 1

    def makeConstructor(self):
        return ''

    def makeDecl(self):
        # Note that initializations in the declarations are solely
        # to avoid 'uninitialized variable' errors from the compiler.
        # Declare memory data variable.
        if self.ctype in ['Twin32_t','Twin64_t']:
            return "%s %s; %s.a = 0; %s.b = 0;\n" % \
                   (self.ctype, self.base_name, self.base_name, self.base_name)
        return '%s %s = 0;\n' % (self.ctype, self.base_name)

    def makeRead(self):
        if self.read_code != None:
            return self.buildReadCode()
        return ''

    def makeWrite(self):
        if self.write_code != None:
            return self.buildWriteCode()
        return ''

    # Return the memory access size *in bits*, suitable for
    # forming a type via "uint%d_t".  Divide by 8 if you want bytes.
    def makeAccSize(self):
        return self.size

class PCOperand(Operand):
    def makeConstructor(self):
        return ''

    def makeRead(self):
        return '%s = xc->readPC();\n' % self.base_name

    def makeWrite(self):
        return 'xc->setPC(%s);\n' % self.base_name

class UPCOperand(Operand):
    def makeConstructor(self):
        return ''

    def makeRead(self):
        if self.read_code != None:
            return self.buildReadCode('readMicroPC')
        return '%s = xc->readMicroPC();\n' % self.base_name

    def makeWrite(self):
        if self.write_code != None:
            return self.buildWriteCode('setMicroPC')
        return 'xc->setMicroPC(%s);\n' % self.base_name

class NUPCOperand(Operand):
    def makeConstructor(self):
        return ''

    def makeRead(self):
        if self.read_code != None:
            return self.buildReadCode('readNextMicroPC')
        return '%s = xc->readNextMicroPC();\n' % self.base_name

    def makeWrite(self):
        if self.write_code != None:
            return self.buildWriteCode('setNextMicroPC')
        return 'xc->setNextMicroPC(%s);\n' % self.base_name

class NPCOperand(Operand):
    def makeConstructor(self):
        return ''

    def makeRead(self):
        if self.read_code != None:
            return self.buildReadCode('readNextPC')
        return '%s = xc->readNextPC();\n' % self.base_name

    def makeWrite(self):
        if self.write_code != None:
            return self.buildWriteCode('setNextPC')
        return 'xc->setNextPC(%s);\n' % self.base_name

class NNPCOperand(Operand):
    def makeConstructor(self):
        return ''

    def makeRead(self):
        if self.read_code != None:
            return self.buildReadCode('readNextNPC')
        return '%s = xc->readNextNPC();\n' % self.base_name

    def makeWrite(self):
        if self.write_code != None:
            return self.buildWriteCode('setNextNPC')
        return 'xc->setNextNPC(%s);\n' % self.base_name

def buildOperandNameMap(user_dict, lineno):
    global operandNameMap
    operandNameMap = {}
    for (op_name, val) in user_dict.iteritems():
        (base_cls_name, dflt_ext, reg_spec, flags, sort_pri) = val[:5]
        if len(val) > 5:
            read_code = val[5]
        else:
            read_code = None
        if len(val) > 6:
            write_code = val[6]
        else:
            write_code = None
        if len(val) > 7:
            error(lineno,
                  'error: too many attributes for operand "%s"' %
                  base_cls_name)

        (dflt_size, dflt_ctype, dflt_is_signed) = operandTypeMap[dflt_ext]
        # Canonical flag structure is a triple of lists, where each list
        # indicates the set of flags implied by this operand always, when
        # used as a source, and when used as a dest, respectively.
        # For simplicity this can be initialized using a variety of fairly
        # obvious shortcuts; we convert these to canonical form here.
        if not flags:
            # no flags specified (e.g., 'None')
            flags = ( [], [], [] )
        elif isinstance(flags, str):
            # a single flag: assumed to be unconditional
            flags = ( [ flags ], [], [] )
        elif isinstance(flags, list):
            # a list of flags: also assumed to be unconditional
            flags = ( flags, [], [] )
        elif isinstance(flags, tuple):
            # it's a tuple: it should be a triple,
            # but each item could be a single string or a list
            (uncond_flags, src_flags, dest_flags) = flags
            flags = (makeList(uncond_flags),
                     makeList(src_flags), makeList(dest_flags))
        # Accumulate attributes of new operand class in tmp_dict
        tmp_dict = {}
        for attr in ('dflt_ext', 'reg_spec', 'flags', 'sort_pri',
                     'dflt_size', 'dflt_ctype', 'dflt_is_signed',
                     'read_code', 'write_code'):
            tmp_dict[attr] = eval(attr)
        tmp_dict['base_name'] = op_name
        # New class name will be e.g. "IntReg_Ra"
        cls_name = base_cls_name + '_' + op_name
        # Evaluate string arg to get class object.  Note that the
        # actual base class for "IntReg" is "IntRegOperand", i.e. we
        # have to append "Operand".
        try:
            base_cls = eval(base_cls_name + 'Operand')
        except NameError:
            error(lineno,
                  'error: unknown operand base class "%s"' % base_cls_name)
        # The following statement creates a new class called
        # <cls_name> as a subclass of <base_cls> with the attributes
        # in tmp_dict, just as if we evaluated a class declaration.
        operandNameMap[op_name] = type(cls_name, (base_cls,), tmp_dict)

    # Define operand variables.
    operands = user_dict.keys()

    operandsREString = (r'''
    (?<![\w\.])      # neg. lookbehind assertion: prevent partial matches
    ((%s)(?:\.(\w+))?)   # match: operand with optional '.' then suffix
    (?![\w\.])       # neg. lookahead assertion: prevent partial matches
    '''
                        % string.join(operands, '|'))

    global operandsRE
    operandsRE = re.compile(operandsREString, re.MULTILINE|re.VERBOSE)

    # Same as operandsREString, but extension is mandatory, and only two
    # groups are returned (base and ext, not full name as above).
    # Used for subtituting '_' for '.' to make C++ identifiers.
    operandsWithExtREString = (r'(?<![\w\.])(%s)\.(\w+)(?![\w\.])'
                               % string.join(operands, '|'))

    global operandsWithExtRE
    operandsWithExtRE = re.compile(operandsWithExtREString, re.MULTILINE)

maxInstSrcRegs = 0
maxInstDestRegs = 0

class OperandList(object):
    '''Find all the operands in the given code block.  Returns an operand
    descriptor list (instance of class OperandList).'''
    def __init__(self, code):
        self.items = []
        self.bases = {}
        # delete comments so we don't match on reg specifiers inside
        code = commentRE.sub('', code)
        # search for operands
        next_pos = 0
        while 1:
            match = operandsRE.search(code, next_pos)
            if not match:
                # no more matches: we're done
                break
            op = match.groups()
            # regexp groups are operand full name, base, and extension
            (op_full, op_base, op_ext) = op
            # if the token following the operand is an assignment, this is
            # a destination (LHS), else it's a source (RHS)
            is_dest = (assignRE.match(code, match.end()) != None)
            is_src = not is_dest
            # see if we've already seen this one
            op_desc = self.find_base(op_base)
            if op_desc:
                if op_desc.ext != op_ext:
                    error('Inconsistent extensions for operand %s' % \
                          op_base)
                op_desc.is_src = op_desc.is_src or is_src
                op_desc.is_dest = op_desc.is_dest or is_dest
            else:
                # new operand: create new descriptor
                op_desc = operandNameMap[op_base](op_full, op_ext,
                                                  is_src, is_dest)
                self.append(op_desc)
            # start next search after end of current match
            next_pos = match.end()
        self.sort()
        # enumerate source & dest register operands... used in building
        # constructor later
        self.numSrcRegs = 0
        self.numDestRegs = 0
        self.numFPDestRegs = 0
        self.numIntDestRegs = 0
        self.memOperand = None
        for op_desc in self.items:
            if op_desc.isReg():
                if op_desc.is_src:
                    op_desc.src_reg_idx = self.numSrcRegs
                    self.numSrcRegs += 1
                if op_desc.is_dest:
                    op_desc.dest_reg_idx = self.numDestRegs
                    self.numDestRegs += 1
                    if op_desc.isFloatReg():
                        self.numFPDestRegs += 1
                    elif op_desc.isIntReg():
                        self.numIntDestRegs += 1
            elif op_desc.isMem():
                if self.memOperand:
                    error("Code block has more than one memory operand.")
                self.memOperand = op_desc
        global maxInstSrcRegs
        global maxInstDestRegs
        if maxInstSrcRegs < self.numSrcRegs:
            maxInstSrcRegs = self.numSrcRegs
        if maxInstDestRegs < self.numDestRegs:
            maxInstDestRegs = self.numDestRegs
        # now make a final pass to finalize op_desc fields that may depend
        # on the register enumeration
        for op_desc in self.items:
            op_desc.finalize()

    def __len__(self):
        return len(self.items)

    def __getitem__(self, index):
        return self.items[index]

    def append(self, op_desc):
        self.items.append(op_desc)
        self.bases[op_desc.base_name] = op_desc

    def find_base(self, base_name):
        # like self.bases[base_name], but returns None if not found
        # (rather than raising exception)
        return self.bases.get(base_name)

    # internal helper function for concat[Some]Attr{Strings|Lists}
    def __internalConcatAttrs(self, attr_name, filter, result):
        for op_desc in self.items:
            if filter(op_desc):
                result += getattr(op_desc, attr_name)
        return result

    # return a single string that is the concatenation of the (string)
    # values of the specified attribute for all operands
    def concatAttrStrings(self, attr_name):
        return self.__internalConcatAttrs(attr_name, lambda x: 1, '')

    # like concatAttrStrings, but only include the values for the operands
    # for which the provided filter function returns true
    def concatSomeAttrStrings(self, filter, attr_name):
        return self.__internalConcatAttrs(attr_name, filter, '')

    # return a single list that is the concatenation of the (list)
    # values of the specified attribute for all operands
    def concatAttrLists(self, attr_name):
        return self.__internalConcatAttrs(attr_name, lambda x: 1, [])

    # like concatAttrLists, but only include the values for the operands
    # for which the provided filter function returns true
    def concatSomeAttrLists(self, filter, attr_name):
        return self.__internalConcatAttrs(attr_name, filter, [])

    def sort(self):
        self.items.sort(lambda a, b: a.sort_pri - b.sort_pri)

class SubOperandList(OperandList):
    '''Find all the operands in the given code block.  Returns an operand
    descriptor list (instance of class OperandList).'''
    def __init__(self, code, master_list):
        self.items = []
        self.bases = {}
        # delete comments so we don't match on reg specifiers inside
        code = commentRE.sub('', code)
        # search for operands
        next_pos = 0
        while 1:
            match = operandsRE.search(code, next_pos)
            if not match:
                # no more matches: we're done
                break
            op = match.groups()
            # regexp groups are operand full name, base, and extension
            (op_full, op_base, op_ext) = op
            # find this op in the master list
            op_desc = master_list.find_base(op_base)
            if not op_desc:
                error('Found operand %s which is not in the master list!' \
                      ' This is an internal error' % op_base)
            else:
                # See if we've already found this operand
                op_desc = self.find_base(op_base)
                if not op_desc:
                    # if not, add a reference to it to this sub list
                    self.append(master_list.bases[op_base])

            # start next search after end of current match
            next_pos = match.end()
        self.sort()
        self.memOperand = None
        for op_desc in self.items:
            if op_desc.isMem():
                if self.memOperand:
                    error("Code block has more than one memory operand.")
                self.memOperand = op_desc

# Regular expression object to match C++ comments
# (used in findOperands())
commentRE = re.compile(r'//.*\n')

# Regular expression object to match assignment statements
# (used in findOperands())
assignRE = re.compile(r'\s*=(?!=)', re.MULTILINE)

# Munge operand names in code string to make legal C++ variable names.
# This means getting rid of the type extension if any.
# (Will match base_name attribute of Operand object.)
def substMungedOpNames(code):
    return operandsWithExtRE.sub(r'\1', code)

# Fix up code snippets for final substitution in templates.
def mungeSnippet(s):
    if isinstance(s, str):
        return substMungedOpNames(substBitOps(s))
    else:
        return s

def makeFlagConstructor(flag_list):
    if len(flag_list) == 0:
        return ''
    # filter out repeated flags
    flag_list.sort()
    i = 1
    while i < len(flag_list):
        if flag_list[i] == flag_list[i-1]:
            del flag_list[i]
        else:
            i += 1
    pre = '\n\tflags['
    post = '] = true;'
    code = pre + string.join(flag_list, post + pre) + post
    return code

# Assume all instruction flags are of the form 'IsFoo'
instFlagRE = re.compile(r'Is.*')

# OpClass constants end in 'Op' except No_OpClass
opClassRE = re.compile(r'.*Op|No_OpClass')

class InstObjParams(object):
    def __init__(self, mnem, class_name, base_class = '',
                 snippets = {}, opt_args = []):
        self.mnemonic = mnem
        self.class_name = class_name
        self.base_class = base_class
        if not isinstance(snippets, dict):
            snippets = {'code' : snippets}
        compositeCode = ' '.join(map(str, snippets.values()))
        self.snippets = snippets

        self.operands = OperandList(compositeCode)
        self.constructor = self.operands.concatAttrStrings('constructor')
        self.constructor += \
                 '\n\t_numSrcRegs = %d;' % self.operands.numSrcRegs
        self.constructor += \
                 '\n\t_numDestRegs = %d;' % self.operands.numDestRegs
        self.constructor += \
                 '\n\t_numFPDestRegs = %d;' % self.operands.numFPDestRegs
        self.constructor += \
                 '\n\t_numIntDestRegs = %d;' % self.operands.numIntDestRegs
        self.flags = self.operands.concatAttrLists('flags')

        # Make a basic guess on the operand class (function unit type).
        # These are good enough for most cases, and can be overridden
        # later otherwise.
        if 'IsStore' in self.flags:
            self.op_class = 'MemWriteOp'
        elif 'IsLoad' in self.flags or 'IsPrefetch' in self.flags:
            self.op_class = 'MemReadOp'
        elif 'IsFloating' in self.flags:
            self.op_class = 'FloatAddOp'
        else:
            self.op_class = 'IntAluOp'

        # Optional arguments are assumed to be either StaticInst flags
        # or an OpClass value.  To avoid having to import a complete
        # list of these values to match against, we do it ad-hoc
        # with regexps.
        for oa in opt_args:
            if instFlagRE.match(oa):
                self.flags.append(oa)
            elif opClassRE.match(oa):
                self.op_class = oa
            else:
                error('InstObjParams: optional arg "%s" not recognized '
                      'as StaticInst::Flag or OpClass.' % oa)

        # add flag initialization to contructor here to include
        # any flags added via opt_args
        self.constructor += makeFlagConstructor(self.flags)

        # if 'IsFloating' is set, add call to the FP enable check
        # function (which should be provided by isa_desc via a declare)
        if 'IsFloating' in self.flags:
            self.fp_enable_check = 'fault = checkFpEnableFault(xc);'
        else:
            self.fp_enable_check = ''

##############
# Stack: a simple stack object.  Used for both formats (formatStack)
# and default cases (defaultStack).  Simply wraps a list to give more
# stack-like syntax and enable initialization with an argument list
# (as opposed to an argument that's a list).

class Stack(list):
    def __init__(self, *items):
        list.__init__(self, items)

    def push(self, item):
        self.append(item);

    def top(self):
        return self[-1]

# The global format stack.
formatStack = Stack(NoFormat())

# The global default case stack.
defaultStack = Stack(None)

# Global stack that tracks current file and line number.
# Each element is a tuple (filename, lineno) that records the
# *current* filename and the line number in the *previous* file where
# it was included.
fileNameStack = Stack()


#######################
#
# Output file template
#

file_template = '''
/*
 * DO NOT EDIT THIS FILE!!!
 *
 * It was automatically generated from the ISA description in %(filename)s
 */

%(includes)s

%(global_output)s

namespace %(namespace)s {

%(namespace_output)s

} // namespace %(namespace)s

%(decode_function)s
'''

max_inst_regs_template = '''
/*
 * DO NOT EDIT THIS FILE!!!
 *
 * It was automatically generated from the ISA description in %(filename)s
 */

namespace %(namespace)s {

    const int MaxInstSrcRegs = %(MaxInstSrcRegs)d;
    const int MaxInstDestRegs = %(MaxInstDestRegs)d;

} // namespace %(namespace)s

'''

class ISAParser(Grammar):
    def __init__(self, output_dir):
        super(ISAParser, self).__init__()
        self.output_dir = output_dir

        self.templateMap = {}

    #####################################################################
    #
    #                                Lexer
    #
    # The PLY lexer module takes two things as input:
    # - A list of token names (the string list 'tokens')
    # - A regular expression describing a match for each token.  The
    #   regexp for token FOO can be provided in two ways:
    #   - as a string variable named t_FOO
    #   - as the doc string for a function named t_FOO.  In this case,
    #     the function is also executed, allowing an action to be
    #     associated with each token match.
    #
    #####################################################################

    # Reserved words.  These are listed separately as they are matched
    # using the same regexp as generic IDs, but distinguished in the
    # t_ID() function.  The PLY documentation suggests this approach.
    reserved = (
        'BITFIELD', 'DECODE', 'DECODER', 'DEFAULT', 'DEF', 'EXEC', 'FORMAT',
        'HEADER', 'LET', 'NAMESPACE', 'OPERAND_TYPES', 'OPERANDS',
        'OUTPUT', 'SIGNED', 'TEMPLATE'
        )

    # List of tokens.  The lex module requires this.
    tokens = reserved + (
        # identifier
        'ID',

        # integer literal
        'INTLIT',

        # string literal
        'STRLIT',

        # code literal
        'CODELIT',

        # ( ) [ ] { } < > , ; . : :: *
        'LPAREN', 'RPAREN',
        'LBRACKET', 'RBRACKET',
        'LBRACE', 'RBRACE',
        'LESS', 'GREATER', 'EQUALS',
        'COMMA', 'SEMI', 'DOT', 'COLON', 'DBLCOLON',
        'ASTERISK',

        # C preprocessor directives
        'CPPDIRECTIVE'

    # The following are matched but never returned. commented out to
    # suppress PLY warning
        # newfile directive
    #    'NEWFILE',

        # endfile directive
    #    'ENDFILE'
    )

    # Regular expressions for token matching
    t_LPAREN           = r'\('
    t_RPAREN           = r'\)'
    t_LBRACKET         = r'\['
    t_RBRACKET         = r'\]'
    t_LBRACE           = r'\{'
    t_RBRACE           = r'\}'
    t_LESS             = r'\<'
    t_GREATER          = r'\>'
    t_EQUALS           = r'='
    t_COMMA            = r','
    t_SEMI             = r';'
    t_DOT              = r'\.'
    t_COLON            = r':'
    t_DBLCOLON         = r'::'
    t_ASTERISK         = r'\*'

    # Identifiers and reserved words
    reserved_map = { }
    for r in reserved:
        reserved_map[r.lower()] = r

    def t_ID(self, t):
        r'[A-Za-z_]\w*'
        t.type = self.reserved_map.get(t.value, 'ID')
        return t

    # Integer literal
    def t_INTLIT(self, t):
        r'-?(0x[\da-fA-F]+)|\d+'
        try:
            t.value = int(t.value,0)
        except ValueError:
            error(t, 'Integer value "%s" too large' % t.value)
            t.value = 0
        return t

    # String literal.  Note that these use only single quotes, and
    # can span multiple lines.
    def t_STRLIT(self, t):
        r"(?m)'([^'])+'"
        # strip off quotes
        t.value = t.value[1:-1]
        t.lexer.lineno += t.value.count('\n')
        return t


    # "Code literal"... like a string literal, but delimiters are
    # '{{' and '}}' so they get formatted nicely under emacs c-mode
    def t_CODELIT(self, t):
        r"(?m)\{\{([^\}]|}(?!\}))+\}\}"
        # strip off {{ & }}
        t.value = t.value[2:-2]
        t.lexer.lineno += t.value.count('\n')
        return t

    def t_CPPDIRECTIVE(self, t):
        r'^\#[^\#].*\n'
        t.lexer.lineno += t.value.count('\n')
        return t

    def t_NEWFILE(self, t):
        r'^\#\#newfile\s+"[\w/.-]*"'
        fileNameStack.push((t.value[11:-1], t.lexer.lineno))
        t.lexer.lineno = 0

    def t_ENDFILE(self, t):
        r'^\#\#endfile'
        (old_filename, t.lexer.lineno) = fileNameStack.pop()

    #
    # The functions t_NEWLINE, t_ignore, and t_error are
    # special for the lex module.
    #

    # Newlines
    def t_NEWLINE(self, t):
        r'\n+'
        t.lexer.lineno += t.value.count('\n')

    # Comments
    def t_comment(self, t):
        r'//.*'

    # Completely ignored characters
    t_ignore = ' \t\x0c'

    # Error handler
    def t_error(self, t):
        error(t, "illegal character '%s'" % t.value[0])
        t.skip(1)

    #####################################################################
    #
    #                                Parser
    #
    # Every function whose name starts with 'p_' defines a grammar
    # rule.  The rule is encoded in the function's doc string, while
    # the function body provides the action taken when the rule is
    # matched.  The argument to each function is a list of the values
    # of the rule's symbols: t[0] for the LHS, and t[1..n] for the
    # symbols on the RHS.  For tokens, the value is copied from the
    # t.value attribute provided by the lexer.  For non-terminals, the
    # value is assigned by the producing rule; i.e., the job of the
    # grammar rule function is to set the value for the non-terminal
    # on the LHS (by assigning to t[0]).
    #####################################################################

    # The LHS of the first grammar rule is used as the start symbol
    # (in this case, 'specification').  Note that this rule enforces
    # that there will be exactly one namespace declaration, with 0 or
    # more global defs/decls before and after it.  The defs & decls
    # before the namespace decl will be outside the namespace; those
    # after will be inside.  The decoder function is always inside the
    # namespace.
    def p_specification(self, t):
        'specification : opt_defs_and_outputs name_decl opt_defs_and_outputs decode_block'
        global_code = t[1]
        isa_name = t[2]
        namespace = isa_name + "Inst"
        # wrap the decode block as a function definition
        t[4].wrap_decode_block('''
StaticInstPtr
%(isa_name)s::decodeInst(%(isa_name)s::ExtMachInst machInst)
{
    using namespace %(namespace)s;
''' % vars(), '}')
        # both the latter output blocks and the decode block are in
        # the namespace
        namespace_code = t[3] + t[4]
        # pass it all back to the caller of yacc.parse()
        t[0] = (isa_name, namespace, global_code, namespace_code)

    # ISA name declaration looks like "namespace <foo>;"
    def p_name_decl(self, t):
        'name_decl : NAMESPACE ID SEMI'
        t[0] = t[2]

    # 'opt_defs_and_outputs' is a possibly empty sequence of
    # def and/or output statements.
    def p_opt_defs_and_outputs_0(self, t):
        'opt_defs_and_outputs : empty'
        t[0] = GenCode()

    def p_opt_defs_and_outputs_1(self, t):
        'opt_defs_and_outputs : defs_and_outputs'
        t[0] = t[1]

    def p_defs_and_outputs_0(self, t):
        'defs_and_outputs : def_or_output'
        t[0] = t[1]

    def p_defs_and_outputs_1(self, t):
        'defs_and_outputs : defs_and_outputs def_or_output'
        t[0] = t[1] + t[2]

    # The list of possible definition/output statements.
    def p_def_or_output(self, t):
        '''def_or_output : def_format
                         | def_bitfield
                         | def_bitfield_struct
                         | def_template
                         | def_operand_types
                         | def_operands
                         | output_header
                         | output_decoder
                         | output_exec
                         | global_let'''
        t[0] = t[1]

    # Output blocks 'output <foo> {{...}}' (C++ code blocks) are copied
    # directly to the appropriate output section.

    # Massage output block by substituting in template definitions and
    # bit operators.  We handle '%'s embedded in the string that don't
    # indicate template substitutions (or CPU-specific symbols, which
    # get handled in GenCode) by doubling them first so that the
    # format operation will reduce them back to single '%'s.
    def process_output(self, s):
        s = protect_non_subst_percents(s)
        # protects cpu-specific symbols too
        s = protect_cpu_symbols(s)
        return substBitOps(s % self.templateMap)

    def p_output_header(self, t):
        'output_header : OUTPUT HEADER CODELIT SEMI'
        t[0] = GenCode(header_output = self.process_output(t[3]))

    def p_output_decoder(self, t):
        'output_decoder : OUTPUT DECODER CODELIT SEMI'
        t[0] = GenCode(decoder_output = self.process_output(t[3]))

    def p_output_exec(self, t):
        'output_exec : OUTPUT EXEC CODELIT SEMI'
        t[0] = GenCode(exec_output = self.process_output(t[3]))

    # global let blocks 'let {{...}}' (Python code blocks) are
    # executed directly when seen.  Note that these execute in a
    # special variable context 'exportContext' to prevent the code
    # from polluting this script's namespace.
    def p_global_let(self, t):
        'global_let : LET CODELIT SEMI'
        updateExportContext()
        exportContext["header_output"] = ''
        exportContext["decoder_output"] = ''
        exportContext["exec_output"] = ''
        exportContext["decode_block"] = ''
        try:
            exec fixPythonIndentation(t[2]) in exportContext
        except Exception, exc:
            error(t, 'error: %s in global let block "%s".' % (exc, t[2]))
        t[0] = GenCode(header_output = exportContext["header_output"],
                       decoder_output = exportContext["decoder_output"],
                       exec_output = exportContext["exec_output"],
                       decode_block = exportContext["decode_block"])

    # Define the mapping from operand type extensions to C++ types and
    # bit widths (stored in operandTypeMap).
    def p_def_operand_types(self, t):
        'def_operand_types : DEF OPERAND_TYPES CODELIT SEMI'
        try:
            user_dict = eval('{' + t[3] + '}')
        except Exception, exc:
            error(t,
                  'error: %s in def operand_types block "%s".' % (exc, t[3]))
        buildOperandTypeMap(user_dict, t.lexer.lineno)
        t[0] = GenCode() # contributes nothing to the output C++ file

    # Define the mapping from operand names to operand classes and
    # other traits.  Stored in operandNameMap.
    def p_def_operands(self, t):
        'def_operands : DEF OPERANDS CODELIT SEMI'
        if not globals().has_key('operandTypeMap'):
            error(t, 'error: operand types must be defined before operands')
        try:
            user_dict = eval('{' + t[3] + '}', exportContext)
        except Exception, exc:
            error(t, 'error: %s in def operands block "%s".' % (exc, t[3]))
        buildOperandNameMap(user_dict, t.lexer.lineno)
        t[0] = GenCode() # contributes nothing to the output C++ file

    # A bitfield definition looks like:
    # 'def [signed] bitfield <ID> [<first>:<last>]'
    # This generates a preprocessor macro in the output file.
    def p_def_bitfield_0(self, t):
        'def_bitfield : DEF opt_signed BITFIELD ID LESS INTLIT COLON INTLIT GREATER SEMI'
        expr = 'bits(machInst, %2d, %2d)' % (t[6], t[8])
        if (t[2] == 'signed'):
            expr = 'sext<%d>(%s)' % (t[6] - t[8] + 1, expr)
        hash_define = '#undef %s\n#define %s\t%s\n' % (t[4], t[4], expr)
        t[0] = GenCode(header_output = hash_define)

    # alternate form for single bit: 'def [signed] bitfield <ID> [<bit>]'
    def p_def_bitfield_1(self, t):
        'def_bitfield : DEF opt_signed BITFIELD ID LESS INTLIT GREATER SEMI'
        expr = 'bits(machInst, %2d, %2d)' % (t[6], t[6])
        if (t[2] == 'signed'):
            expr = 'sext<%d>(%s)' % (1, expr)
        hash_define = '#undef %s\n#define %s\t%s\n' % (t[4], t[4], expr)
        t[0] = GenCode(header_output = hash_define)

    # alternate form for structure member: 'def bitfield <ID> <ID>'
    def p_def_bitfield_struct(self, t):
        'def_bitfield_struct : DEF opt_signed BITFIELD ID id_with_dot SEMI'
        if (t[2] != ''):
            error(t, 'error: structure bitfields are always unsigned.')
        expr = 'machInst.%s' % t[5]
        hash_define = '#undef %s\n#define %s\t%s\n' % (t[4], t[4], expr)
        t[0] = GenCode(header_output = hash_define)

    def p_id_with_dot_0(self, t):
        'id_with_dot : ID'
        t[0] = t[1]

    def p_id_with_dot_1(self, t):
        'id_with_dot : ID DOT id_with_dot'
        t[0] = t[1] + t[2] + t[3]

    def p_opt_signed_0(self, t):
        'opt_signed : SIGNED'
        t[0] = t[1]

    def p_opt_signed_1(self, t):
        'opt_signed : empty'
        t[0] = ''

    def p_def_template(self, t):
        'def_template : DEF TEMPLATE ID CODELIT SEMI'
        self.templateMap[t[3]] = Template(t[4])
        t[0] = GenCode()

    # An instruction format definition looks like
    # "def format <fmt>(<params>) {{...}};"
    def p_def_format(self, t):
        'def_format : DEF FORMAT ID LPAREN param_list RPAREN CODELIT SEMI'
        (id, params, code) = (t[3], t[5], t[7])
        defFormat(id, params, code, t.lexer.lineno)
        t[0] = GenCode()

    # The formal parameter list for an instruction format is a
    # possibly empty list of comma-separated parameters.  Positional
    # (standard, non-keyword) parameters must come first, followed by
    # keyword parameters, followed by a '*foo' parameter that gets
    # excess positional arguments (as in Python).  Each of these three
    # parameter categories is optional.
    #
    # Note that we do not support the '**foo' parameter for collecting
    # otherwise undefined keyword args.  Otherwise the parameter list
    # is (I believe) identical to what is supported in Python.
    #
    # The param list generates a tuple, where the first element is a
    # list of the positional params and the second element is a dict
    # containing the keyword params.
    def p_param_list_0(self, t):
        'param_list : positional_param_list COMMA nonpositional_param_list'
        t[0] = t[1] + t[3]

    def p_param_list_1(self, t):
        '''param_list : positional_param_list
                      | nonpositional_param_list'''
        t[0] = t[1]

    def p_positional_param_list_0(self, t):
        'positional_param_list : empty'
        t[0] = []

    def p_positional_param_list_1(self, t):
        'positional_param_list : ID'
        t[0] = [t[1]]

    def p_positional_param_list_2(self, t):
        'positional_param_list : positional_param_list COMMA ID'
        t[0] = t[1] + [t[3]]

    def p_nonpositional_param_list_0(self, t):
        'nonpositional_param_list : keyword_param_list COMMA excess_args_param'
        t[0] = t[1] + t[3]

    def p_nonpositional_param_list_1(self, t):
        '''nonpositional_param_list : keyword_param_list
                                    | excess_args_param'''
        t[0] = t[1]

    def p_keyword_param_list_0(self, t):
        'keyword_param_list : keyword_param'
        t[0] = [t[1]]

    def p_keyword_param_list_1(self, t):
        'keyword_param_list : keyword_param_list COMMA keyword_param'
        t[0] = t[1] + [t[3]]

    def p_keyword_param(self, t):
        'keyword_param : ID EQUALS expr'
        t[0] = t[1] + ' = ' + t[3].__repr__()

    def p_excess_args_param(self, t):
        'excess_args_param : ASTERISK ID'
        # Just concatenate them: '*ID'.  Wrap in list to be consistent
        # with positional_param_list and keyword_param_list.
        t[0] = [t[1] + t[2]]

    # End of format definition-related rules.
    ##############

    #
    # A decode block looks like:
    #       decode <field1> [, <field2>]* [default <inst>] { ... }
    #
    def p_decode_block(self, t):
        'decode_block : DECODE ID opt_default LBRACE decode_stmt_list RBRACE'
        default_defaults = defaultStack.pop()
        codeObj = t[5]
        # use the "default defaults" only if there was no explicit
        # default statement in decode_stmt_list
        if not codeObj.has_decode_default:
            codeObj += default_defaults
        codeObj.wrap_decode_block('switch (%s) {\n' % t[2], '}\n')
        t[0] = codeObj

    # The opt_default statement serves only to push the "default
    # defaults" onto defaultStack.  This value will be used by nested
    # decode blocks, and used and popped off when the current
    # decode_block is processed (in p_decode_block() above).
    def p_opt_default_0(self, t):
        'opt_default : empty'
        # no default specified: reuse the one currently at the top of
        # the stack
        defaultStack.push(defaultStack.top())
        # no meaningful value returned
        t[0] = None

    def p_opt_default_1(self, t):
        'opt_default : DEFAULT inst'
        # push the new default
        codeObj = t[2]
        codeObj.wrap_decode_block('\ndefault:\n', 'break;\n')
        defaultStack.push(codeObj)
        # no meaningful value returned
        t[0] = None

    def p_decode_stmt_list_0(self, t):
        'decode_stmt_list : decode_stmt'
        t[0] = t[1]

    def p_decode_stmt_list_1(self, t):
        'decode_stmt_list : decode_stmt decode_stmt_list'
        if (t[1].has_decode_default and t[2].has_decode_default):
            error(t, 'Two default cases in decode block')
        t[0] = t[1] + t[2]

    #
    # Decode statement rules
    #
    # There are four types of statements allowed in a decode block:
    # 1. Format blocks 'format <foo> { ... }'
    # 2. Nested decode blocks
    # 3. Instruction definitions.
    # 4. C preprocessor directives.


    # Preprocessor directives found in a decode statement list are
    # passed through to the output, replicated to all of the output
    # code streams.  This works well for ifdefs, so we can ifdef out
    # both the declarations and the decode cases generated by an
    # instruction definition.  Handling them as part of the grammar
    # makes it easy to keep them in the right place with respect to
    # the code generated by the other statements.
    def p_decode_stmt_cpp(self, t):
        'decode_stmt : CPPDIRECTIVE'
        t[0] = GenCode(t[1], t[1], t[1], t[1])

    # A format block 'format <foo> { ... }' sets the default
    # instruction format used to handle instruction definitions inside
    # the block.  This format can be overridden by using an explicit
    # format on the instruction definition or with a nested format
    # block.
    def p_decode_stmt_format(self, t):
        'decode_stmt : FORMAT push_format_id LBRACE decode_stmt_list RBRACE'
        # The format will be pushed on the stack when 'push_format_id'
        # is processed (see below).  Once the parser has recognized
        # the full production (though the right brace), we're done
        # with the format, so now we can pop it.
        formatStack.pop()
        t[0] = t[4]

    # This rule exists so we can set the current format (& push the
    # stack) when we recognize the format name part of the format
    # block.
    def p_push_format_id(self, t):
        'push_format_id : ID'
        try:
            formatStack.push(formatMap[t[1]])
            t[0] = ('', '// format %s' % t[1])
        except KeyError:
            error(t, 'instruction format "%s" not defined.' % t[1])

    # Nested decode block: if the value of the current field matches
    # the specified constant, do a nested decode on some other field.
    def p_decode_stmt_decode(self, t):
        'decode_stmt : case_label COLON decode_block'
        label = t[1]
        codeObj = t[3]
        # just wrap the decoding code from the block as a case in the
        # outer switch statement.
        codeObj.wrap_decode_block('\n%s:\n' % label)
        codeObj.has_decode_default = (label == 'default')
        t[0] = codeObj

    # Instruction definition (finally!).
    def p_decode_stmt_inst(self, t):
        'decode_stmt : case_label COLON inst SEMI'
        label = t[1]
        codeObj = t[3]
        codeObj.wrap_decode_block('\n%s:' % label, 'break;\n')
        codeObj.has_decode_default = (label == 'default')
        t[0] = codeObj

    # The case label is either a list of one or more constants or
    # 'default'
    def p_case_label_0(self, t):
        'case_label : intlit_list'
        def make_case(intlit):
            if intlit >= 2**32:
                return 'case ULL(%#x)' % intlit
            else:
                return 'case %#x' % intlit
        t[0] = ': '.join(map(make_case, t[1]))

    def p_case_label_1(self, t):
        'case_label : DEFAULT'
        t[0] = 'default'

    #
    # The constant list for a decode case label must be non-empty, but
    # may have one or more comma-separated integer literals in it.
    #
    def p_intlit_list_0(self, t):
        'intlit_list : INTLIT'
        t[0] = [t[1]]

    def p_intlit_list_1(self, t):
        'intlit_list : intlit_list COMMA INTLIT'
        t[0] = t[1]
        t[0].append(t[3])

    # Define an instruction using the current instruction format
    # (specified by an enclosing format block).
    # "<mnemonic>(<args>)"
    def p_inst_0(self, t):
        'inst : ID LPAREN arg_list RPAREN'
        # Pass the ID and arg list to the current format class to deal with.
        currentFormat = formatStack.top()
        codeObj = currentFormat.defineInst(t[1], t[3], t.lexer.lineno)
        args = ','.join(map(str, t[3]))
        args = re.sub('(?m)^', '//', args)
        args = re.sub('^//', '', args)
        comment = '\n// %s::%s(%s)\n' % (currentFormat.id, t[1], args)
        codeObj.prepend_all(comment)
        t[0] = codeObj

    # Define an instruction using an explicitly specified format:
    # "<fmt>::<mnemonic>(<args>)"
    def p_inst_1(self, t):
        'inst : ID DBLCOLON ID LPAREN arg_list RPAREN'
        try:
            format = formatMap[t[1]]
        except KeyError:
            error(t, 'instruction format "%s" not defined.' % t[1])
        codeObj = format.defineInst(t[3], t[5], t.lexer.lineno)
        comment = '\n// %s::%s(%s)\n' % (t[1], t[3], t[5])
        codeObj.prepend_all(comment)
        t[0] = codeObj

    # The arg list generates a tuple, where the first element is a
    # list of the positional args and the second element is a dict
    # containing the keyword args.
    def p_arg_list_0(self, t):
        'arg_list : positional_arg_list COMMA keyword_arg_list'
        t[0] = ( t[1], t[3] )

    def p_arg_list_1(self, t):
        'arg_list : positional_arg_list'
        t[0] = ( t[1], {} )

    def p_arg_list_2(self, t):
        'arg_list : keyword_arg_list'
        t[0] = ( [], t[1] )

    def p_positional_arg_list_0(self, t):
        'positional_arg_list : empty'
        t[0] = []

    def p_positional_arg_list_1(self, t):
        'positional_arg_list : expr'
        t[0] = [t[1]]

    def p_positional_arg_list_2(self, t):
        'positional_arg_list : positional_arg_list COMMA expr'
        t[0] = t[1] + [t[3]]

    def p_keyword_arg_list_0(self, t):
        'keyword_arg_list : keyword_arg'
        t[0] = t[1]

    def p_keyword_arg_list_1(self, t):
        'keyword_arg_list : keyword_arg_list COMMA keyword_arg'
        t[0] = t[1]
        t[0].update(t[3])

    def p_keyword_arg(self, t):
        'keyword_arg : ID EQUALS expr'
        t[0] = { t[1] : t[3] }

    #
    # Basic expressions.  These constitute the argument values of
    # "function calls" (i.e. instruction definitions in the decode
    # block) and default values for formal parameters of format
    # functions.
    #
    # Right now, these are either strings, integers, or (recursively)
    # lists of exprs (using Python square-bracket list syntax).  Note
    # that bare identifiers are trated as string constants here (since
    # there isn't really a variable namespace to refer to).
    #
    def p_expr_0(self, t):
        '''expr : ID
                | INTLIT
                | STRLIT
                | CODELIT'''
        t[0] = t[1]

    def p_expr_1(self, t):
        '''expr : LBRACKET list_expr RBRACKET'''
        t[0] = t[2]

    def p_list_expr_0(self, t):
        'list_expr : expr'
        t[0] = [t[1]]

    def p_list_expr_1(self, t):
        'list_expr : list_expr COMMA expr'
        t[0] = t[1] + [t[3]]

    def p_list_expr_2(self, t):
        'list_expr : empty'
        t[0] = []

    #
    # Empty production... use in other rules for readability.
    #
    def p_empty(self, t):
        'empty :'
        pass

    # Parse error handler.  Note that the argument here is the
    # offending *token*, not a grammar symbol (hence the need to use
    # t.value)
    def p_error(self, t):
        if t:
            error(t, "syntax error at '%s'" % t.value)
        else:
            error("unknown syntax error")

    # END OF GRAMMAR RULES

    def update_if_needed(self, file, contents):
        '''Update the output file only if the new contents are
        different from the current contents.  Minimizes the files that
        need to be rebuilt after minor changes.'''

        file = os.path.join(self.output_dir, file)
        update = False
        if os.access(file, os.R_OK):
            f = open(file, 'r')
            old_contents = f.read()
            f.close()
            if contents != old_contents:
                print 'Updating', file
                os.remove(file) # in case it's write-protected
                update = True
            else:
                print 'File', file, 'is unchanged'
        else:
            print 'Generating', file
            update = True
        if update:
            f = open(file, 'w')
            f.write(contents)
            f.close()

    # This regular expression matches '##include' directives
    includeRE = re.compile(r'^\s*##include\s+"(?P<filename>[\w/.-]*)".*$',
                           re.MULTILINE)

    def replace_include(self, matchobj, dirname):
        """Function to replace a matched '##include' directive with the
        contents of the specified file (with nested ##includes
        replaced recursively).  'matchobj' is an re match object
        (from a match of includeRE) and 'dirname' is the directory
        relative to which the file path should be resolved."""

        fname = matchobj.group('filename')
        full_fname = os.path.normpath(os.path.join(dirname, fname))
        contents = '##newfile "%s"\n%s\n##endfile\n' % \
                   (full_fname, self.read_and_flatten(full_fname))
        return contents

    def read_and_flatten(self, filename):
        """Read a file and recursively flatten nested '##include' files."""

        current_dir = os.path.dirname(filename)
        try:
            contents = open(filename).read()
        except IOError:
            error('Error including file "%s"' % filename)

        fileNameStack.push((filename, 0))

        # Find any includes and include them
        def replace(matchobj):
            return self.replace_include(matchobj, current_dir)
        contents = self.includeRE.sub(replace, contents)

        fileNameStack.pop()
        return contents

    def _parse_isa_desc(self, isa_desc_file):
        '''Read in and parse the ISA description.'''

        # Read file and (recursively) all included files into a string.
        # PLY requires that the input be in a single string so we have to
        # do this up front.
        isa_desc = self.read_and_flatten(isa_desc_file)

        # Initialize filename stack with outer file.
        fileNameStack.push((isa_desc_file, 0))

        # Parse it.
        (isa_name, namespace, global_code, namespace_code) = \
                   self.parse(isa_desc)

        # grab the last three path components of isa_desc_file to put in
        # the output
        filename = '/'.join(isa_desc_file.split('/')[-3:])

        # generate decoder.hh
        includes = '#include "base/bitfield.hh" // for bitfield support'
        global_output = global_code.header_output
        namespace_output = namespace_code.header_output
        decode_function = ''
        self.update_if_needed('decoder.hh', file_template % vars())

        # generate decoder.cc
        includes = '#include "decoder.hh"'
        global_output = global_code.decoder_output
        namespace_output = namespace_code.decoder_output
        # namespace_output += namespace_code.decode_block
        decode_function = namespace_code.decode_block
        self.update_if_needed('decoder.cc', file_template % vars())

        # generate per-cpu exec files
        for cpu in cpu_models:
            includes = '#include "decoder.hh"\n'
            includes += cpu.includes
            global_output = global_code.exec_output[cpu.name]
            namespace_output = namespace_code.exec_output[cpu.name]
            decode_function = ''
            self.update_if_needed(cpu.filename, file_template % vars())

        # The variable names here are hacky, but this will creat local
        # variables which will be referenced in vars() which have the
        # value of the globals.
        global maxInstSrcRegs
        MaxInstSrcRegs = maxInstSrcRegs
        global maxInstDestRegs
        MaxInstDestRegs = maxInstDestRegs
        # max_inst_regs.hh
        self.update_if_needed('max_inst_regs.hh',
                              max_inst_regs_template % vars())

    def parse_isa_desc(self, *args, **kwargs):
        try:
            self._parse_isa_desc(*args, **kwargs)
        except ISAParserError, e:
            e.exit(fileNameStack)

# global list of CpuModel objects (see cpu_models.py)
cpu_models = []

# Called as script: get args from command line.
# Args are: <path to cpu_models.py> <isa desc file> <output dir> <cpu models>
if __name__ == '__main__':
    execfile(sys.argv[1])  # read in CpuModel definitions
    cpu_models = [CpuModel.dict[cpu] for cpu in sys.argv[4:]]
    parser = ISAParser(sys.argv[3])
    parser.parse_isa_desc(sys.argv[2])