system.cc revision 11793:ef606668d247 
1/*
2 * Copyright (c) 2010-2013, 2016 ARM Limited
3 * All rights reserved
4 *
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder.  You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
13 *
14 * Copyright (c) 2002-2006 The Regents of The University of Michigan
15 * All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
27 *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 *
40 * Authors: Ali Saidi
41 */
42
43#include "arch/arm/linux/system.hh"
44
45#include "arch/arm/isa_traits.hh"
46#include "arch/arm/linux/atag.hh"
47#include "arch/arm/utility.hh"
48#include "arch/generic/linux/threadinfo.hh"
49#include "base/loader/dtb_object.hh"
50#include "base/loader/object_file.hh"
51#include "base/loader/symtab.hh"
52#include "cpu/base.hh"
53#include "cpu/pc_event.hh"
54#include "cpu/thread_context.hh"
55#include "debug/Loader.hh"
56#include "kern/linux/events.hh"
57#include "kern/linux/helpers.hh"
58#include "mem/fs_translating_port_proxy.hh"
59#include "mem/physical.hh"
60#include "sim/stat_control.hh"
61
62using namespace ArmISA;
63using namespace Linux;
64
65LinuxArmSystem::LinuxArmSystem(Params *p)
66    : GenericArmSystem(p), dumpStatsPCEvent(nullptr),
67      enableContextSwitchStatsDump(p->enable_context_switch_stats_dump),
68      taskFile(nullptr), kernelPanicEvent(nullptr), kernelOopsEvent(nullptr)
69{
70    const std::string dmesg_output = name() + ".dmesg";
71    if (p->panic_on_panic) {
72        kernelPanicEvent = addKernelFuncEventOrPanic<Linux::KernelPanicEvent>(
73            "panic", "Kernel panic in simulated kernel", dmesg_output);
74    } else {
75        kernelPanicEvent = addKernelFuncEventOrPanic<Linux::DmesgDumpEvent>(
76            "panic", "Kernel panic in simulated kernel", dmesg_output);
77    }
78
79    if (p->panic_on_oops) {
80        kernelOopsEvent = addKernelFuncEventOrPanic<Linux::KernelPanicEvent>(
81            "oops_exit", "Kernel oops in guest", dmesg_output);
82    } else {
83        kernelOopsEvent = addKernelFuncEventOrPanic<Linux::DmesgDumpEvent>(
84            "oops_exit", "Kernel oops in guest", dmesg_output);
85    }
86
87    // With ARM udelay() is #defined to __udelay
88    // newer kernels use __loop_udelay and __loop_const_udelay symbols
89    uDelaySkipEvent = addKernelFuncEvent<UDelayEvent>(
90        "__loop_udelay", "__udelay", 1000, 0);
91    if (!uDelaySkipEvent)
92        uDelaySkipEvent = addKernelFuncEventOrPanic<UDelayEvent>(
93         "__udelay", "__udelay", 1000, 0);
94
95    // constant arguments to udelay() have some precomputation done ahead of
96    // time. Constant comes from code.
97    constUDelaySkipEvent = addKernelFuncEvent<UDelayEvent>(
98        "__loop_const_udelay", "__const_udelay", 1000, 107374);
99    if (!constUDelaySkipEvent)
100        constUDelaySkipEvent = addKernelFuncEventOrPanic<UDelayEvent>(
101         "__const_udelay", "__const_udelay", 1000, 107374);
102
103}
104
105void
106LinuxArmSystem::initState()
107{
108    // Moved from the constructor to here since it relies on the
109    // address map being resolved in the interconnect
110
111    // Call the initialisation of the super class
112    GenericArmSystem::initState();
113
114    // Load symbols at physical address, we might not want
115    // to do this permanently, for but early bootup work
116    // it is helpful.
117    if (params()->early_kernel_symbols) {
118        kernel->loadGlobalSymbols(kernelSymtab, 0, 0, loadAddrMask);
119        kernel->loadGlobalSymbols(debugSymbolTable, 0, 0, loadAddrMask);
120    }
121
122    // Setup boot data structure
123    Addr addr = 0;
124    // Check if the kernel image has a symbol that tells us it supports
125    // device trees.
126    bool kernel_has_fdt_support =
127        kernelSymtab->findAddress("unflatten_device_tree", addr);
128    bool dtb_file_specified = params()->dtb_filename != "";
129
130    if (kernel_has_fdt_support && dtb_file_specified) {
131        // Kernel supports flattened device tree and dtb file specified.
132        // Using Device Tree Blob to describe system configuration.
133        inform("Loading DTB file: %s at address %#x\n", params()->dtb_filename,
134                params()->atags_addr + loadAddrOffset);
135
136        ObjectFile *dtb_file = createObjectFile(params()->dtb_filename, true);
137        if (!dtb_file) {
138            fatal("couldn't load DTB file: %s\n", params()->dtb_filename);
139        }
140
141        DtbObject *_dtb_file = dynamic_cast<DtbObject*>(dtb_file);
142
143        if (_dtb_file) {
144            if (!_dtb_file->addBootCmdLine(params()->boot_osflags.c_str(),
145                                           params()->boot_osflags.size())) {
146                warn("couldn't append bootargs to DTB file: %s\n",
147                     params()->dtb_filename);
148            }
149        } else {
150            warn("dtb_file cast failed; couldn't append bootargs "
151                 "to DTB file: %s\n", params()->dtb_filename);
152        }
153
154        dtb_file->setTextBase(params()->atags_addr + loadAddrOffset);
155        dtb_file->loadSections(physProxy);
156        delete dtb_file;
157    } else {
158        // Using ATAGS
159        // Warn if the kernel supports FDT and we haven't specified one
160        if (kernel_has_fdt_support) {
161            assert(!dtb_file_specified);
162            warn("Kernel supports device tree, but no DTB file specified\n");
163        }
164        // Warn if the kernel doesn't support FDT and we have specified one
165        if (dtb_file_specified) {
166            assert(!kernel_has_fdt_support);
167            warn("DTB file specified, but no device tree support in kernel\n");
168        }
169
170        AtagCore ac;
171        ac.flags(1); // read-only
172        ac.pagesize(8192);
173        ac.rootdev(0);
174
175        AddrRangeList atagRanges = physmem.getConfAddrRanges();
176        if (atagRanges.size() != 1) {
177            fatal("Expected a single ATAG memory entry but got %d\n",
178                  atagRanges.size());
179        }
180        AtagMem am;
181        am.memSize(atagRanges.begin()->size());
182        am.memStart(atagRanges.begin()->start());
183
184        AtagCmdline ad;
185        ad.cmdline(params()->boot_osflags);
186
187        DPRINTF(Loader, "boot command line %d bytes: %s\n",
188                ad.size() <<2, params()->boot_osflags.c_str());
189
190        AtagNone an;
191
192        uint32_t size = ac.size() + am.size() + ad.size() + an.size();
193        uint32_t offset = 0;
194        uint8_t *boot_data = new uint8_t[size << 2];
195
196        offset += ac.copyOut(boot_data + offset);
197        offset += am.copyOut(boot_data + offset);
198        offset += ad.copyOut(boot_data + offset);
199        offset += an.copyOut(boot_data + offset);
200
201        DPRINTF(Loader, "Boot atags was %d bytes in total\n", size << 2);
202        DDUMP(Loader, boot_data, size << 2);
203
204        physProxy.writeBlob(params()->atags_addr + loadAddrOffset, boot_data,
205                size << 2);
206
207        delete[] boot_data;
208    }
209
210    // Kernel boot requirements to set up r0, r1 and r2 in ARMv7
211    for (int i = 0; i < threadContexts.size(); i++) {
212        threadContexts[i]->setIntReg(0, 0);
213        threadContexts[i]->setIntReg(1, params()->machine_type);
214        threadContexts[i]->setIntReg(2, params()->atags_addr + loadAddrOffset);
215    }
216}
217
218LinuxArmSystem::~LinuxArmSystem()
219{
220    if (uDelaySkipEvent)
221        delete uDelaySkipEvent;
222    if (constUDelaySkipEvent)
223        delete constUDelaySkipEvent;
224
225    if (dumpStatsPCEvent)
226        delete dumpStatsPCEvent;
227}
228
229LinuxArmSystem *
230LinuxArmSystemParams::create()
231{
232    return new LinuxArmSystem(this);
233}
234
235void
236LinuxArmSystem::startup()
237{
238    if (enableContextSwitchStatsDump) {
239        dumpStatsPCEvent = addKernelFuncEvent<DumpStatsPCEvent>("__switch_to");
240        if (!dumpStatsPCEvent)
241           panic("dumpStatsPCEvent not created!");
242
243        std::string task_filename = "tasks.txt";
244        taskFile = simout.create(name() + "." + task_filename);
245
246        for (int i = 0; i < _numContexts; i++) {
247            ThreadContext *tc = threadContexts[i];
248            uint32_t pid = tc->getCpuPtr()->getPid();
249            if (pid != BaseCPU::invldPid) {
250                mapPid(tc, pid);
251                tc->getCpuPtr()->taskId(taskMap[pid]);
252            }
253        }
254    }
255}
256
257void
258LinuxArmSystem::mapPid(ThreadContext *tc, uint32_t pid)
259{
260    // Create a new unique identifier for this pid
261    std::map<uint32_t, uint32_t>::iterator itr = taskMap.find(pid);
262    if (itr == taskMap.end()) {
263        uint32_t map_size = taskMap.size();
264        if (map_size > ContextSwitchTaskId::MaxNormalTaskId + 1) {
265            warn_once("Error out of identifiers for cache occupancy stats");
266            taskMap[pid] = ContextSwitchTaskId::Unknown;
267        } else {
268            taskMap[pid] = map_size;
269        }
270    }
271}
272
273void
274LinuxArmSystem::dumpDmesg()
275{
276    Linux::dumpDmesg(getThreadContext(0), std::cout);
277}
278
279/** This function is called whenever the the kernel function
280 *  "__switch_to" is called to change running tasks.
281 *
282 *  r0 = task_struct of the previously running process
283 *  r1 = task_info of the previously running process
284 *  r2 = task_info of the next process to run
285 */
286void
287DumpStatsPCEvent::process(ThreadContext *tc)
288{
289    Linux::ThreadInfo ti(tc);
290    Addr task_descriptor = tc->readIntReg(2);
291    uint32_t pid = ti.curTaskPID(task_descriptor);
292    uint32_t tgid = ti.curTaskTGID(task_descriptor);
293    std::string next_task_str = ti.curTaskName(task_descriptor);
294
295    // Streamline treats pid == -1 as the kernel process.
296    // Also pid == 0 implies idle process (except during Linux boot)
297    int32_t mm = ti.curTaskMm(task_descriptor);
298    bool is_kernel = (mm == 0);
299    if (is_kernel && (pid != 0)) {
300        pid = -1;
301        tgid = -1;
302        next_task_str = "kernel";
303    }
304
305    LinuxArmSystem* sys = dynamic_cast<LinuxArmSystem *>(tc->getSystemPtr());
306    if (!sys) {
307        panic("System is not LinuxArmSystem while getting Linux process info!");
308    }
309    std::map<uint32_t, uint32_t>& taskMap = sys->taskMap;
310
311    // Create a new unique identifier for this pid
312    sys->mapPid(tc, pid);
313
314    // Set cpu task id, output process info, and dump stats
315    tc->getCpuPtr()->taskId(taskMap[pid]);
316    tc->getCpuPtr()->setPid(pid);
317
318    OutputStream* taskFile = sys->taskFile;
319
320    // Task file is read by cache occupancy plotting script or
321    // Streamline conversion script.
322    ccprintf(*(taskFile->stream()),
323             "tick=%lld %d cpu_id=%d next_pid=%d next_tgid=%d next_task=%s\n",
324             curTick(), taskMap[pid], tc->cpuId(), (int) pid, (int) tgid,
325             next_task_str);
326    taskFile->stream()->flush();
327
328    // Dump and reset statistics
329    Stats::schedStatEvent(true, true, curTick(), 0);
330}
331
332