Doxyfile revision 10915
1# Doxyfile 1.7.6.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project.
5#
6# All text after a hash (#) is considered a comment and will be ignored.
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ").
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or sequence of words) that should
26# identify the project. Note that if you do not use Doxywizard you need
27# to put quotes around the project name if it contains spaces.
28
29PROJECT_NAME           = "NoMali Device Model"
30
31# The PROJECT_NUMBER tag can be used to enter a project or revision number.
32# This could be handy for archiving the generated documentation or
33# if some version control system is used.
34
35PROJECT_NUMBER         =
36
37# Using the PROJECT_BRIEF tag one can provide an optional one line description
38# for a project that appears at the top of each page and should give viewer
39# a quick idea about the purpose of the project. Keep the description short.
40
41PROJECT_BRIEF          =
42
43# With the PROJECT_LOGO tag one can specify an logo or icon that is
44# included in the documentation. The maximum height of the logo should not
45# exceed 55 pixels and the maximum width should not exceed 200 pixels.
46# Doxygen will copy the logo to the output directory.
47
48PROJECT_LOGO           =
49
50# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51# base path where the generated documentation will be put.
52# If a relative path is entered, it will be relative to the location
53# where doxygen was started. If left blank the current directory will be used.
54
55OUTPUT_DIRECTORY       = docs/
56
57# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58# 4096 sub-directories (in 2 levels) under the output directory of each output
59# format and will distribute the generated files over these directories.
60# Enabling this option can be useful when feeding doxygen a huge amount of
61# source files, where putting all generated files in the same directory would
62# otherwise cause performance problems for the file system.
63
64CREATE_SUBDIRS         = NO
65
66# The OUTPUT_LANGUAGE tag is used to specify the language in which all
67# documentation generated by doxygen is written. Doxygen will use this
68# information to generate all constant output in the proper language.
69# The default language is English, other supported languages are:
70# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
74# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
75# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
76
77OUTPUT_LANGUAGE        = English
78
79# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80# include brief member descriptions after the members that are listed in
81# the file and class documentation (similar to JavaDoc).
82# Set to NO to disable this.
83
84BRIEF_MEMBER_DESC      = YES
85
86# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87# the brief description of a member or function before the detailed description.
88# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
89# brief descriptions will be completely suppressed.
90
91REPEAT_BRIEF           = YES
92
93# This tag implements a quasi-intelligent brief description abbreviator
94# that is used to form the text in various listings. Each string
95# in this list, if found as the leading text of the brief description, will be
96# stripped from the text and the result after processing the whole list, is
97# used as the annotated text. Otherwise, the brief description is used as-is.
98# If left blank, the following values are used ("$name" is automatically
99# replaced with the name of the entity): "The $name class" "The $name widget"
100# "The $name file" "is" "provides" "specifies" "contains"
101# "represents" "a" "an" "the"
102
103ABBREVIATE_BRIEF       =
104
105# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
106# Doxygen will generate a detailed section even if there is only a brief
107# description.
108
109ALWAYS_DETAILED_SEC    = NO
110
111# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
112# inherited members of a class in the documentation of that class as if those
113# members were ordinary class members. Constructors, destructors and assignment
114# operators of the base classes will not be shown.
115
116INLINE_INHERITED_MEMB  = NO
117
118# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
119# path before files name in the file list and in the header files. If set
120# to NO the shortest path that makes the file name unique will be used.
121
122FULL_PATH_NAMES        = YES
123
124# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
125# can be used to strip a user-defined part of the path. Stripping is
126# only done if one of the specified strings matches the left-hand part of
127# the path. The tag can be used to show relative paths in the file list.
128# If left blank the directory from which doxygen is run is used as the
129# path to strip.
130
131STRIP_FROM_PATH        =
132
133# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
134# the path mentioned in the documentation of a class, which tells
135# the reader which header file to include in order to use a class.
136# If left blank only the name of the header file containing the class
137# definition is used. Otherwise one should specify the include paths that
138# are normally passed to the compiler using the -I flag.
139
140STRIP_FROM_INC_PATH    =
141
142# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
143# (but less readable) file names. This can be useful if your file system
144# doesn't support long names like on DOS, Mac, or CD-ROM.
145
146SHORT_NAMES            = NO
147
148# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
149# will interpret the first line (until the first dot) of a JavaDoc-style
150# comment as the brief description. If set to NO, the JavaDoc
151# comments will behave just like regular Qt-style comments
152# (thus requiring an explicit @brief command for a brief description.)
153
154JAVADOC_AUTOBRIEF      = NO
155
156# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
157# interpret the first line (until the first dot) of a Qt-style
158# comment as the brief description. If set to NO, the comments
159# will behave just like regular Qt-style comments (thus requiring
160# an explicit \brief command for a brief description.)
161
162QT_AUTOBRIEF           = NO
163
164# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
165# treat a multi-line C++ special comment block (i.e. a block of //! or ///
166# comments) as a brief description. This used to be the default behaviour.
167# The new default is to treat a multi-line C++ comment block as a detailed
168# description. Set this tag to YES if you prefer the old behaviour instead.
169
170MULTILINE_CPP_IS_BRIEF = NO
171
172# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
173# member inherits the documentation from any documented member that it
174# re-implements.
175
176INHERIT_DOCS           = YES
177
178# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
179# a new page for each member. If set to NO, the documentation of a member will
180# be part of the file/class/namespace that contains it.
181
182SEPARATE_MEMBER_PAGES  = NO
183
184# The TAB_SIZE tag can be used to set the number of spaces in a tab.
185# Doxygen uses this value to replace tabs by spaces in code fragments.
186
187TAB_SIZE               = 8
188
189# This tag can be used to specify a number of aliases that acts
190# as commands in the documentation. An alias has the form "name=value".
191# For example adding "sideeffect=\par Side Effects:\n" will allow you to
192# put the command \sideeffect (or @sideeffect) in the documentation, which
193# will result in a user-defined paragraph with heading "Side Effects:".
194# You can put \n's in the value part of an alias to insert newlines.
195
196ALIASES                =
197
198ALIASES += errors="\par Errors:"
199ALIASES += error=" - \ref"
200
201
202# This tag can be used to specify a number of word-keyword mappings (TCL only).
203# A mapping has the form "name=value". For example adding
204# "class=itcl::class" will allow you to use the command class in the
205# itcl::class meaning.
206
207TCL_SUBST              =
208
209# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
210# sources only. Doxygen will then generate output that is more tailored for C.
211# For instance, some of the names that are used will be different. The list
212# of all members will be omitted, etc.
213
214OPTIMIZE_OUTPUT_FOR_C  = NO
215
216# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
217# sources only. Doxygen will then generate output that is more tailored for
218# Java. For instance, namespaces will be presented as packages, qualified
219# scopes will look different, etc.
220
221OPTIMIZE_OUTPUT_JAVA   = NO
222
223# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
224# sources only. Doxygen will then generate output that is more tailored for
225# Fortran.
226
227OPTIMIZE_FOR_FORTRAN   = NO
228
229# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
230# sources. Doxygen will then generate output that is tailored for
231# VHDL.
232
233OPTIMIZE_OUTPUT_VHDL   = NO
234
235# Doxygen selects the parser to use depending on the extension of the files it
236# parses. With this tag you can assign which parser to use for a given extension.
237# Doxygen has a built-in mapping, but you can override or extend it using this
238# tag. The format is ext=language, where ext is a file extension, and language
239# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
240# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
241# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
242# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
243# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
244
245EXTENSION_MAPPING      =
246
247# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
248# to include (a tag file for) the STL sources as input, then you should
249# set this tag to YES in order to let doxygen match functions declarations and
250# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
251# func(std::string) {}). This also makes the inheritance and collaboration
252# diagrams that involve STL classes more complete and accurate.
253
254BUILTIN_STL_SUPPORT    = NO
255
256# If you use Microsoft's C++/CLI language, you should set this option to YES to
257# enable parsing support.
258
259CPP_CLI_SUPPORT        = NO
260
261# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
262# Doxygen will parse them like normal C++ but will assume all classes use public
263# instead of private inheritance when no explicit protection keyword is present.
264
265SIP_SUPPORT            = NO
266
267# For Microsoft's IDL there are propget and propput attributes to indicate getter
268# and setter methods for a property. Setting this option to YES (the default)
269# will make doxygen replace the get and set methods by a property in the
270# documentation. This will only work if the methods are indeed getting or
271# setting a simple type. If this is not the case, or you want to show the
272# methods anyway, you should set this option to NO.
273
274IDL_PROPERTY_SUPPORT   = YES
275
276# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
277# tag is set to YES, then doxygen will reuse the documentation of the first
278# member in the group (if any) for the other members of the group. By default
279# all members of a group must be documented explicitly.
280
281DISTRIBUTE_GROUP_DOC   = NO
282
283# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
284# the same type (for instance a group of public functions) to be put as a
285# subgroup of that type (e.g. under the Public Functions section). Set it to
286# NO to prevent subgrouping. Alternatively, this can be done per class using
287# the \nosubgrouping command.
288
289SUBGROUPING            = YES
290
291# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
292# unions are shown inside the group in which they are included (e.g. using
293# @ingroup) instead of on a separate page (for HTML and Man pages) or
294# section (for LaTeX and RTF).
295
296INLINE_GROUPED_CLASSES = NO
297
298# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
299# unions with only public data fields will be shown inline in the documentation
300# of the scope in which they are defined (i.e. file, namespace, or group
301# documentation), provided this scope is documented. If set to NO (the default),
302# structs, classes, and unions are shown on a separate page (for HTML and Man
303# pages) or section (for LaTeX and RTF).
304
305INLINE_SIMPLE_STRUCTS  = NO
306
307# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
308# is documented as struct, union, or enum with the name of the typedef. So
309# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
310# with name TypeT. When disabled the typedef will appear as a member of a file,
311# namespace, or class. And the struct will be named TypeS. This can typically
312# be useful for C code in case the coding convention dictates that all compound
313# types are typedef'ed and only the typedef is referenced, never the tag name.
314
315TYPEDEF_HIDES_STRUCT   = NO
316
317# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
318# determine which symbols to keep in memory and which to flush to disk.
319# When the cache is full, less often used symbols will be written to disk.
320# For small to medium size projects (<1000 input files) the default value is
321# probably good enough. For larger projects a too small cache size can cause
322# doxygen to be busy swapping symbols to and from disk most of the time
323# causing a significant performance penalty.
324# If the system has enough physical memory increasing the cache will improve the
325# performance by keeping more symbols in memory. Note that the value works on
326# a logarithmic scale so increasing the size by one will roughly double the
327# memory usage. The cache size is given by this formula:
328# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
329# corresponding to a cache size of 2^16 = 65536 symbols.
330
331SYMBOL_CACHE_SIZE      = 0
332
333# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
334# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
335# their name and scope. Since this can be an expensive process and often the
336# same symbol appear multiple times in the code, doxygen keeps a cache of
337# pre-resolved symbols. If the cache is too small doxygen will become slower.
338# If the cache is too large, memory is wasted. The cache size is given by this
339# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
340# corresponding to a cache size of 2^16 = 65536 symbols.
341
342LOOKUP_CACHE_SIZE      = 0
343
344#---------------------------------------------------------------------------
345# Build related configuration options
346#---------------------------------------------------------------------------
347
348# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
349# documentation are documented, even if no documentation was available.
350# Private class members and static file members will be hidden unless
351# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
352
353EXTRACT_ALL            = NO
354
355# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
356# will be included in the documentation.
357
358EXTRACT_PRIVATE        = NO
359
360# If the EXTRACT_STATIC tag is set to YES all static members of a file
361# will be included in the documentation.
362
363EXTRACT_STATIC         = NO
364
365# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
366# defined locally in source files will be included in the documentation.
367# If set to NO only classes defined in header files are included.
368
369EXTRACT_LOCAL_CLASSES  = YES
370
371# This flag is only useful for Objective-C code. When set to YES local
372# methods, which are defined in the implementation section but not in
373# the interface are included in the documentation.
374# If set to NO (the default) only methods in the interface are included.
375
376EXTRACT_LOCAL_METHODS  = NO
377
378# If this flag is set to YES, the members of anonymous namespaces will be
379# extracted and appear in the documentation as a namespace called
380# 'anonymous_namespace{file}', where file will be replaced with the base
381# name of the file that contains the anonymous namespace. By default
382# anonymous namespaces are hidden.
383
384EXTRACT_ANON_NSPACES   = NO
385
386# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
387# undocumented members of documented classes, files or namespaces.
388# If set to NO (the default) these members will be included in the
389# various overviews, but no documentation section is generated.
390# This option has no effect if EXTRACT_ALL is enabled.
391
392HIDE_UNDOC_MEMBERS     = NO
393
394# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
395# undocumented classes that are normally visible in the class hierarchy.
396# If set to NO (the default) these classes will be included in the various
397# overviews. This option has no effect if EXTRACT_ALL is enabled.
398
399HIDE_UNDOC_CLASSES     = NO
400
401# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
402# friend (class|struct|union) declarations.
403# If set to NO (the default) these declarations will be included in the
404# documentation.
405
406HIDE_FRIEND_COMPOUNDS  = NO
407
408# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
409# documentation blocks found inside the body of a function.
410# If set to NO (the default) these blocks will be appended to the
411# function's detailed documentation block.
412
413HIDE_IN_BODY_DOCS      = NO
414
415# The INTERNAL_DOCS tag determines if documentation
416# that is typed after a \internal command is included. If the tag is set
417# to NO (the default) then the documentation will be excluded.
418# Set it to YES to include the internal documentation.
419
420INTERNAL_DOCS          = NO
421
422# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
423# file names in lower-case letters. If set to YES upper-case letters are also
424# allowed. This is useful if you have classes or files whose names only differ
425# in case and if your file system supports case sensitive file names. Windows
426# and Mac users are advised to set this option to NO.
427
428CASE_SENSE_NAMES       = YES
429
430# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
431# will show members with their full class and namespace scopes in the
432# documentation. If set to YES the scope will be hidden.
433
434HIDE_SCOPE_NAMES       = NO
435
436# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
437# will put a list of the files that are included by a file in the documentation
438# of that file.
439
440SHOW_INCLUDE_FILES     = YES
441
442# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
443# will list include files with double quotes in the documentation
444# rather than with sharp brackets.
445
446FORCE_LOCAL_INCLUDES   = NO
447
448# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
449# is inserted in the documentation for inline members.
450
451INLINE_INFO            = YES
452
453# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
454# will sort the (detailed) documentation of file and class members
455# alphabetically by member name. If set to NO the members will appear in
456# declaration order.
457
458SORT_MEMBER_DOCS       = YES
459
460# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
461# brief documentation of file, namespace and class members alphabetically
462# by member name. If set to NO (the default) the members will appear in
463# declaration order.
464
465SORT_BRIEF_DOCS        = NO
466
467# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
468# will sort the (brief and detailed) documentation of class members so that
469# constructors and destructors are listed first. If set to NO (the default)
470# the constructors will appear in the respective orders defined by
471# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
472# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
473# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
474
475SORT_MEMBERS_CTORS_1ST = NO
476
477# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
478# hierarchy of group names into alphabetical order. If set to NO (the default)
479# the group names will appear in their defined order.
480
481SORT_GROUP_NAMES       = NO
482
483# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
484# sorted by fully-qualified names, including namespaces. If set to
485# NO (the default), the class list will be sorted only by class name,
486# not including the namespace part.
487# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
488# Note: This option applies only to the class list, not to the
489# alphabetical list.
490
491SORT_BY_SCOPE_NAME     = NO
492
493# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
494# do proper type resolution of all parameters of a function it will reject a
495# match between the prototype and the implementation of a member function even
496# if there is only one candidate or it is obvious which candidate to choose
497# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
498# will still accept a match between prototype and implementation in such cases.
499
500STRICT_PROTO_MATCHING  = NO
501
502# The GENERATE_TODOLIST tag can be used to enable (YES) or
503# disable (NO) the todo list. This list is created by putting \todo
504# commands in the documentation.
505
506GENERATE_TODOLIST      = YES
507
508# The GENERATE_TESTLIST tag can be used to enable (YES) or
509# disable (NO) the test list. This list is created by putting \test
510# commands in the documentation.
511
512GENERATE_TESTLIST      = YES
513
514# The GENERATE_BUGLIST tag can be used to enable (YES) or
515# disable (NO) the bug list. This list is created by putting \bug
516# commands in the documentation.
517
518GENERATE_BUGLIST       = YES
519
520# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
521# disable (NO) the deprecated list. This list is created by putting
522# \deprecated commands in the documentation.
523
524GENERATE_DEPRECATEDLIST= YES
525
526# The ENABLED_SECTIONS tag can be used to enable conditional
527# documentation sections, marked by \if sectionname ... \endif.
528
529ENABLED_SECTIONS       =
530
531# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
532# the initial value of a variable or macro consists of for it to appear in
533# the documentation. If the initializer consists of more lines than specified
534# here it will be hidden. Use a value of 0 to hide initializers completely.
535# The appearance of the initializer of individual variables and macros in the
536# documentation can be controlled using \showinitializer or \hideinitializer
537# command in the documentation regardless of this setting.
538
539MAX_INITIALIZER_LINES  = 30
540
541# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
542# at the bottom of the documentation of classes and structs. If set to YES the
543# list will mention the files that were used to generate the documentation.
544
545SHOW_USED_FILES        = YES
546
547# If the sources in your project are distributed over multiple directories
548# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
549# in the documentation. The default is NO.
550
551SHOW_DIRECTORIES       = NO
552
553# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
554# This will remove the Files entry from the Quick Index and from the
555# Folder Tree View (if specified). The default is YES.
556
557SHOW_FILES             = YES
558
559# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
560# Namespaces page.
561# This will remove the Namespaces entry from the Quick Index
562# and from the Folder Tree View (if specified). The default is YES.
563
564SHOW_NAMESPACES        = YES
565
566# The FILE_VERSION_FILTER tag can be used to specify a program or script that
567# doxygen should invoke to get the current version for each file (typically from
568# the version control system). Doxygen will invoke the program by executing (via
569# popen()) the command <command> <input-file>, where <command> is the value of
570# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
571# provided by doxygen. Whatever the program writes to standard output
572# is used as the file version. See the manual for examples.
573
574FILE_VERSION_FILTER    =
575
576# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
577# by doxygen. The layout file controls the global structure of the generated
578# output files in an output format independent way. The create the layout file
579# that represents doxygen's defaults, run doxygen with the -l option.
580# You can optionally specify a file name after the option, if omitted
581# DoxygenLayout.xml will be used as the name of the layout file.
582
583LAYOUT_FILE            =
584
585# The CITE_BIB_FILES tag can be used to specify one or more bib files
586# containing the references data. This must be a list of .bib files. The
587# .bib extension is automatically appended if omitted. Using this command
588# requires the bibtex tool to be installed. See also
589# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
590# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
591# feature you need bibtex and perl available in the search path.
592
593CITE_BIB_FILES         =
594
595#---------------------------------------------------------------------------
596# configuration options related to warning and progress messages
597#---------------------------------------------------------------------------
598
599# The QUIET tag can be used to turn on/off the messages that are generated
600# by doxygen. Possible values are YES and NO. If left blank NO is used.
601
602QUIET                  = NO
603
604# The WARNINGS tag can be used to turn on/off the warning messages that are
605# generated by doxygen. Possible values are YES and NO. If left blank
606# NO is used.
607
608WARNINGS               = YES
609
610# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
611# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
612# automatically be disabled.
613
614WARN_IF_UNDOCUMENTED   = NO
615
616# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
617# potential errors in the documentation, such as not documenting some
618# parameters in a documented function, or documenting parameters that
619# don't exist or using markup commands wrongly.
620
621WARN_IF_DOC_ERROR      = YES
622
623# The WARN_NO_PARAMDOC option can be enabled to get warnings for
624# functions that are documented, but have no documentation for their parameters
625# or return value. If set to NO (the default) doxygen will only warn about
626# wrong or incomplete parameter documentation, but not about the absence of
627# documentation.
628
629WARN_NO_PARAMDOC       = NO
630
631# The WARN_FORMAT tag determines the format of the warning messages that
632# doxygen can produce. The string should contain the $file, $line, and $text
633# tags, which will be replaced by the file and line number from which the
634# warning originated and the warning text. Optionally the format may contain
635# $version, which will be replaced by the version of the file (if it could
636# be obtained via FILE_VERSION_FILTER)
637
638WARN_FORMAT            = "$file:$line: $text"
639
640# The WARN_LOGFILE tag can be used to specify a file to which warning
641# and error messages should be written. If left blank the output is written
642# to stderr.
643
644WARN_LOGFILE           =
645
646#---------------------------------------------------------------------------
647# configuration options related to the input files
648#---------------------------------------------------------------------------
649
650# The INPUT tag can be used to specify the files and/or directories that contain
651# documented source files. You may enter file names like "myfile.cpp" or
652# directories like "/usr/src/myproject". Separate the files or directories
653# with spaces.
654
655INPUT                  = include/ lib/
656
657# This tag can be used to specify the character encoding of the source files
658# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
659# also the default input encoding. Doxygen uses libiconv (or the iconv built
660# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
661# the list of possible encodings.
662
663INPUT_ENCODING         = UTF-8
664
665# If the value of the INPUT tag contains directories, you can use the
666# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
667# and *.h) to filter out the source-files in the directories. If left
668# blank the following patterns are tested:
669# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
670# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
671# *.f90 *.f *.for *.vhd *.vhdl
672
673FILE_PATTERNS          =
674
675# The RECURSIVE tag can be used to turn specify whether or not subdirectories
676# should be searched for input files as well. Possible values are YES and NO.
677# If left blank NO is used.
678
679RECURSIVE              = YES
680
681# The EXCLUDE tag can be used to specify files and/or directories that should be
682# excluded from the INPUT source files. This way you can easily exclude a
683# subdirectory from a directory tree whose root is specified with the INPUT tag.
684# Note that relative paths are relative to the directory from which doxygen is
685# run.
686
687EXCLUDE                =
688
689# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
690# directories that are symbolic links (a Unix file system feature) are excluded
691# from the input.
692
693EXCLUDE_SYMLINKS       = NO
694
695# If the value of the INPUT tag contains directories, you can use the
696# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
697# certain files from those directories. Note that the wildcards are matched
698# against the file with absolute path, so to exclude all test directories
699# for example use the pattern */test/*
700
701EXCLUDE_PATTERNS       =
702
703# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
704# (namespaces, classes, functions, etc.) that should be excluded from the
705# output. The symbol name can be a fully qualified name, a word, or if the
706# wildcard * is used, a substring. Examples: ANamespace, AClass,
707# AClass::ANamespace, ANamespace::*Test
708
709EXCLUDE_SYMBOLS        =
710
711# The EXAMPLE_PATH tag can be used to specify one or more files or
712# directories that contain example code fragments that are included (see
713# the \include command).
714
715EXAMPLE_PATH           =
716
717# If the value of the EXAMPLE_PATH tag contains directories, you can use the
718# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
719# and *.h) to filter out the source-files in the directories. If left
720# blank all files are included.
721
722EXAMPLE_PATTERNS       =
723
724# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
725# searched for input files to be used with the \include or \dontinclude
726# commands irrespective of the value of the RECURSIVE tag.
727# Possible values are YES and NO. If left blank NO is used.
728
729EXAMPLE_RECURSIVE      = NO
730
731# The IMAGE_PATH tag can be used to specify one or more files or
732# directories that contain image that are included in the documentation (see
733# the \image command).
734
735IMAGE_PATH             =
736
737# The INPUT_FILTER tag can be used to specify a program that doxygen should
738# invoke to filter for each input file. Doxygen will invoke the filter program
739# by executing (via popen()) the command <filter> <input-file>, where <filter>
740# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
741# input file. Doxygen will then use the output that the filter program writes
742# to standard output.
743# If FILTER_PATTERNS is specified, this tag will be
744# ignored.
745
746INPUT_FILTER           = ./doxygen.sed
747
748# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
749# basis.
750# Doxygen will compare the file name with each pattern and apply the
751# filter if there is a match.
752# The filters are a list of the form:
753# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
754# info on how filters are used. If FILTER_PATTERNS is empty or if
755# non of the patterns match the file name, INPUT_FILTER is applied.
756
757FILTER_PATTERNS        =
758
759# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
760# INPUT_FILTER) will be used to filter the input files when producing source
761# files to browse (i.e. when SOURCE_BROWSER is set to YES).
762
763FILTER_SOURCE_FILES    = NO
764
765# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
766# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
767# and it is also possible to disable source filtering for a specific pattern
768# using *.ext= (so without naming a filter). This option only has effect when
769# FILTER_SOURCE_FILES is enabled.
770
771FILTER_SOURCE_PATTERNS =
772
773#---------------------------------------------------------------------------
774# configuration options related to source browsing
775#---------------------------------------------------------------------------
776
777# If the SOURCE_BROWSER tag is set to YES then a list of source files will
778# be generated. Documented entities will be cross-referenced with these sources.
779# Note: To get rid of all source code in the generated output, make sure also
780# VERBATIM_HEADERS is set to NO.
781
782SOURCE_BROWSER         = NO
783
784# Setting the INLINE_SOURCES tag to YES will include the body
785# of functions and classes directly in the documentation.
786
787INLINE_SOURCES         = NO
788
789# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
790# doxygen to hide any special comment blocks from generated source code
791# fragments. Normal C and C++ comments will always remain visible.
792
793STRIP_CODE_COMMENTS    = YES
794
795# If the REFERENCED_BY_RELATION tag is set to YES
796# then for each documented function all documented
797# functions referencing it will be listed.
798
799REFERENCED_BY_RELATION = NO
800
801# If the REFERENCES_RELATION tag is set to YES
802# then for each documented function all documented entities
803# called/used by that function will be listed.
804
805REFERENCES_RELATION    = NO
806
807# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
808# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
809# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
810# link to the source code.
811# Otherwise they will link to the documentation.
812
813REFERENCES_LINK_SOURCE = YES
814
815# If the USE_HTAGS tag is set to YES then the references to source code
816# will point to the HTML generated by the htags(1) tool instead of doxygen
817# built-in source browser. The htags tool is part of GNU's global source
818# tagging system (see http://www.gnu.org/software/global/global.html). You
819# will need version 4.8.6 or higher.
820
821USE_HTAGS              = NO
822
823# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
824# will generate a verbatim copy of the header file for each class for
825# which an include is specified. Set to NO to disable this.
826
827VERBATIM_HEADERS       = YES
828
829#---------------------------------------------------------------------------
830# configuration options related to the alphabetical class index
831#---------------------------------------------------------------------------
832
833# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
834# of all compounds will be generated. Enable this if the project
835# contains a lot of classes, structs, unions or interfaces.
836
837ALPHABETICAL_INDEX     = YES
838
839# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
840# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
841# in which this list will be split (can be a number in the range [1..20])
842
843COLS_IN_ALPHA_INDEX    = 5
844
845# In case all classes in a project start with a common prefix, all
846# classes will be put under the same header in the alphabetical index.
847# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
848# should be ignored while generating the index headers.
849
850IGNORE_PREFIX          =
851
852#---------------------------------------------------------------------------
853# configuration options related to the HTML output
854#---------------------------------------------------------------------------
855
856# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
857# generate HTML output.
858
859GENERATE_HTML          = YES
860
861# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
862# If a relative path is entered the value of OUTPUT_DIRECTORY will be
863# put in front of it. If left blank `html' will be used as the default path.
864
865HTML_OUTPUT            = html
866
867# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
868# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
869# doxygen will generate files with .html extension.
870
871HTML_FILE_EXTENSION    = .html
872
873# The HTML_HEADER tag can be used to specify a personal HTML header for
874# each generated HTML page. If it is left blank doxygen will generate a
875# standard header. Note that when using a custom header you are responsible
876#  for the proper inclusion of any scripts and style sheets that doxygen
877# needs, which is dependent on the configuration options used.
878# It is advised to generate a default header using "doxygen -w html
879# header.html footer.html stylesheet.css YourConfigFile" and then modify
880# that header. Note that the header is subject to change so you typically
881# have to redo this when upgrading to a newer version of doxygen or when
882# changing the value of configuration settings such as GENERATE_TREEVIEW!
883
884HTML_HEADER            =
885
886# The HTML_FOOTER tag can be used to specify a personal HTML footer for
887# each generated HTML page. If it is left blank doxygen will generate a
888# standard footer.
889
890HTML_FOOTER            =
891
892# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
893# style sheet that is used by each HTML page. It can be used to
894# fine-tune the look of the HTML output. If the tag is left blank doxygen
895# will generate a default style sheet. Note that doxygen will try to copy
896# the style sheet file to the HTML output directory, so don't put your own
897# style sheet in the HTML output directory as well, or it will be erased!
898
899HTML_STYLESHEET        =
900
901# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
902# other source files which should be copied to the HTML output directory. Note
903# that these files will be copied to the base HTML output directory. Use the
904# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
905# files. In the HTML_STYLESHEET file, use the file name only. Also note that
906# the files will be copied as-is; there are no commands or markers available.
907
908HTML_EXTRA_FILES       =
909
910# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
911# Doxygen will adjust the colors in the style sheet and background images
912# according to this color. Hue is specified as an angle on a colorwheel,
913# see http://en.wikipedia.org/wiki/Hue for more information.
914# For instance the value 0 represents red, 60 is yellow, 120 is green,
915# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
916# The allowed range is 0 to 359.
917
918HTML_COLORSTYLE_HUE    = 220
919
920# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
921# the colors in the HTML output. For a value of 0 the output will use
922# grayscales only. A value of 255 will produce the most vivid colors.
923
924HTML_COLORSTYLE_SAT    = 100
925
926# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
927# the luminance component of the colors in the HTML output. Values below
928# 100 gradually make the output lighter, whereas values above 100 make
929# the output darker. The value divided by 100 is the actual gamma applied,
930# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
931# and 100 does not change the gamma.
932
933HTML_COLORSTYLE_GAMMA  = 80
934
935# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
936# page will contain the date and time when the page was generated. Setting
937# this to NO can help when comparing the output of multiple runs.
938
939HTML_TIMESTAMP         = YES
940
941# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
942# files or namespaces will be aligned in HTML using tables. If set to
943# NO a bullet list will be used.
944
945HTML_ALIGN_MEMBERS     = YES
946
947# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
948# documentation will contain sections that can be hidden and shown after the
949# page has loaded. For this to work a browser that supports
950# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
951# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
952
953HTML_DYNAMIC_SECTIONS  = NO
954
955# If the GENERATE_DOCSET tag is set to YES, additional index files
956# will be generated that can be used as input for Apple's Xcode 3
957# integrated development environment, introduced with OSX 10.5 (Leopard).
958# To create a documentation set, doxygen will generate a Makefile in the
959# HTML output directory. Running make will produce the docset in that
960# directory and running "make install" will install the docset in
961# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
962# it at startup.
963# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
964# for more information.
965
966GENERATE_DOCSET        = NO
967
968# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
969# feed. A documentation feed provides an umbrella under which multiple
970# documentation sets from a single provider (such as a company or product suite)
971# can be grouped.
972
973DOCSET_FEEDNAME        = "Doxygen generated docs"
974
975# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
976# should uniquely identify the documentation set bundle. This should be a
977# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
978# will append .docset to the name.
979
980DOCSET_BUNDLE_ID       = org.doxygen.Project
981
982# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
983# the documentation publisher. This should be a reverse domain-name style
984# string, e.g. com.mycompany.MyDocSet.documentation.
985
986DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
987
988# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
989
990DOCSET_PUBLISHER_NAME  = Publisher
991
992# If the GENERATE_HTMLHELP tag is set to YES, additional index files
993# will be generated that can be used as input for tools like the
994# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
995# of the generated HTML documentation.
996
997GENERATE_HTMLHELP      = NO
998
999# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
1000# be used to specify the file name of the resulting .chm file. You
1001# can add a path in front of the file if the result should not be
1002# written to the html output directory.
1003
1004CHM_FILE               =
1005
1006# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
1007# be used to specify the location (absolute path including file name) of
1008# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
1009# the HTML help compiler on the generated index.hhp.
1010
1011HHC_LOCATION           =
1012
1013# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1014# controls if a separate .chi index file is generated (YES) or that
1015# it should be included in the master .chm file (NO).
1016
1017GENERATE_CHI           = NO
1018
1019# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1020# is used to encode HtmlHelp index (hhk), content (hhc) and project file
1021# content.
1022
1023CHM_INDEX_ENCODING     =
1024
1025# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1026# controls whether a binary table of contents is generated (YES) or a
1027# normal table of contents (NO) in the .chm file.
1028
1029BINARY_TOC             = NO
1030
1031# The TOC_EXPAND flag can be set to YES to add extra items for group members
1032# to the contents of the HTML help documentation and to the tree view.
1033
1034TOC_EXPAND             = NO
1035
1036# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1037# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1038# that can be used as input for Qt's qhelpgenerator to generate a
1039# Qt Compressed Help (.qch) of the generated HTML documentation.
1040
1041GENERATE_QHP           = NO
1042
1043# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1044# be used to specify the file name of the resulting .qch file.
1045# The path specified is relative to the HTML output folder.
1046
1047QCH_FILE               =
1048
1049# The QHP_NAMESPACE tag specifies the namespace to use when generating
1050# Qt Help Project output. For more information please see
1051# http://doc.trolltech.com/qthelpproject.html#namespace
1052
1053QHP_NAMESPACE          = org.doxygen.Project
1054
1055# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1056# Qt Help Project output. For more information please see
1057# http://doc.trolltech.com/qthelpproject.html#virtual-folders
1058
1059QHP_VIRTUAL_FOLDER     = doc
1060
1061# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1062# add. For more information please see
1063# http://doc.trolltech.com/qthelpproject.html#custom-filters
1064
1065QHP_CUST_FILTER_NAME   =
1066
1067# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1068# custom filter to add. For more information please see
1069# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1070# Qt Help Project / Custom Filters</a>.
1071
1072QHP_CUST_FILTER_ATTRS  =
1073
1074# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1075# project's
1076# filter section matches.
1077# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1078# Qt Help Project / Filter Attributes</a>.
1079
1080QHP_SECT_FILTER_ATTRS  =
1081
1082# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1083# be used to specify the location of Qt's qhelpgenerator.
1084# If non-empty doxygen will try to run qhelpgenerator on the generated
1085# .qhp file.
1086
1087QHG_LOCATION           =
1088
1089# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1090#  will be generated, which together with the HTML files, form an Eclipse help
1091# plugin. To install this plugin and make it available under the help contents
1092# menu in Eclipse, the contents of the directory containing the HTML and XML
1093# files needs to be copied into the plugins directory of eclipse. The name of
1094# the directory within the plugins directory should be the same as
1095# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1096# the help appears.
1097
1098GENERATE_ECLIPSEHELP   = NO
1099
1100# A unique identifier for the eclipse help plugin. When installing the plugin
1101# the directory name containing the HTML and XML files should also have
1102# this name.
1103
1104ECLIPSE_DOC_ID         = org.doxygen.Project
1105
1106# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1107# at top of each HTML page. The value NO (the default) enables the index and
1108# the value YES disables it. Since the tabs have the same information as the
1109# navigation tree you can set this option to NO if you already set
1110# GENERATE_TREEVIEW to YES.
1111
1112DISABLE_INDEX          = NO
1113
1114# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1115# structure should be generated to display hierarchical information.
1116# If the tag value is set to YES, a side panel will be generated
1117# containing a tree-like index structure (just like the one that
1118# is generated for HTML Help). For this to work a browser that supports
1119# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1120# Windows users are probably better off using the HTML help feature.
1121# Since the tree basically has the same information as the tab index you
1122# could consider to set DISABLE_INDEX to NO when enabling this option.
1123
1124GENERATE_TREEVIEW      = NO
1125
1126# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1127# (range [0,1..20]) that doxygen will group on one line in the generated HTML
1128# documentation. Note that a value of 0 will completely suppress the enum
1129# values from appearing in the overview section.
1130
1131ENUM_VALUES_PER_LINE   = 4
1132
1133# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
1134# and Class Hierarchy pages using a tree view instead of an ordered list.
1135
1136USE_INLINE_TREES       = NO
1137
1138# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1139# used to set the initial width (in pixels) of the frame in which the tree
1140# is shown.
1141
1142TREEVIEW_WIDTH         = 250
1143
1144# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1145# links to external symbols imported via tag files in a separate window.
1146
1147EXT_LINKS_IN_WINDOW    = NO
1148
1149# Use this tag to change the font size of Latex formulas included
1150# as images in the HTML documentation. The default is 10. Note that
1151# when you change the font size after a successful doxygen run you need
1152# to manually remove any form_*.png images from the HTML output directory
1153# to force them to be regenerated.
1154
1155FORMULA_FONTSIZE       = 10
1156
1157# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1158# generated for formulas are transparent PNGs. Transparent PNGs are
1159# not supported properly for IE 6.0, but are supported on all modern browsers.
1160# Note that when changing this option you need to delete any form_*.png files
1161# in the HTML output before the changes have effect.
1162
1163FORMULA_TRANSPARENT    = YES
1164
1165# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1166# (see http://www.mathjax.org) which uses client side Javascript for the
1167# rendering instead of using prerendered bitmaps. Use this if you do not
1168# have LaTeX installed or if you want to formulas look prettier in the HTML
1169# output. When enabled you also need to install MathJax separately and
1170# configure the path to it using the MATHJAX_RELPATH option.
1171
1172USE_MATHJAX            = NO
1173
1174# When MathJax is enabled you need to specify the location relative to the
1175# HTML output directory using the MATHJAX_RELPATH option. The destination
1176# directory should contain the MathJax.js script. For instance, if the mathjax
1177# directory is located at the same level as the HTML output directory, then
1178# MATHJAX_RELPATH should be ../mathjax. The default value points to the
1179# mathjax.org site, so you can quickly see the result without installing
1180# MathJax, but it is strongly recommended to install a local copy of MathJax
1181# before deployment.
1182
1183MATHJAX_RELPATH        = http://www.mathjax.org/mathjax
1184
1185# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
1186# names that should be enabled during MathJax rendering.
1187
1188MATHJAX_EXTENSIONS     =
1189
1190# When the SEARCHENGINE tag is enabled doxygen will generate a search box
1191# for the HTML output. The underlying search engine uses javascript
1192# and DHTML and should work on any modern browser. Note that when using
1193# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1194# (GENERATE_DOCSET) there is already a search function so this one should
1195# typically be disabled. For large projects the javascript based search engine
1196# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1197
1198SEARCHENGINE           = YES
1199
1200# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1201# implemented using a PHP enabled web server instead of at the web client
1202# using Javascript. Doxygen will generate the search PHP script and index
1203# file to put on the web server. The advantage of the server
1204# based approach is that it scales better to large projects and allows
1205# full text search. The disadvantages are that it is more difficult to setup
1206# and does not have live searching capabilities.
1207
1208SERVER_BASED_SEARCH    = NO
1209
1210#---------------------------------------------------------------------------
1211# configuration options related to the LaTeX output
1212#---------------------------------------------------------------------------
1213
1214# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1215# generate Latex output.
1216
1217GENERATE_LATEX         = NO
1218
1219# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1220# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1221# put in front of it. If left blank `latex' will be used as the default path.
1222
1223LATEX_OUTPUT           = latex
1224
1225# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1226# invoked. If left blank `latex' will be used as the default command name.
1227# Note that when enabling USE_PDFLATEX this option is only used for
1228# generating bitmaps for formulas in the HTML output, but not in the
1229# Makefile that is written to the output directory.
1230
1231LATEX_CMD_NAME         = latex
1232
1233# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1234# generate index for LaTeX. If left blank `makeindex' will be used as the
1235# default command name.
1236
1237MAKEINDEX_CMD_NAME     = makeindex
1238
1239# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1240# LaTeX documents. This may be useful for small projects and may help to
1241# save some trees in general.
1242
1243COMPACT_LATEX          = NO
1244
1245# The PAPER_TYPE tag can be used to set the paper type that is used
1246# by the printer. Possible values are: a4, letter, legal and
1247# executive. If left blank a4wide will be used.
1248
1249PAPER_TYPE             = a4
1250
1251# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1252# packages that should be included in the LaTeX output.
1253
1254EXTRA_PACKAGES         =
1255
1256# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1257# the generated latex document. The header should contain everything until
1258# the first chapter. If it is left blank doxygen will generate a
1259# standard header. Notice: only use this tag if you know what you are doing!
1260
1261LATEX_HEADER           =
1262
1263# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1264# the generated latex document. The footer should contain everything after
1265# the last chapter. If it is left blank doxygen will generate a
1266# standard footer. Notice: only use this tag if you know what you are doing!
1267
1268LATEX_FOOTER           =
1269
1270# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1271# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1272# contain links (just like the HTML output) instead of page references
1273# This makes the output suitable for online browsing using a pdf viewer.
1274
1275PDF_HYPERLINKS         = YES
1276
1277# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1278# plain latex in the generated Makefile. Set this option to YES to get a
1279# higher quality PDF documentation.
1280
1281USE_PDFLATEX           = YES
1282
1283# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1284# command to the generated LaTeX files. This will instruct LaTeX to keep
1285# running if errors occur, instead of asking the user for help.
1286# This option is also used when generating formulas in HTML.
1287
1288LATEX_BATCHMODE        = NO
1289
1290# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1291# include the index chapters (such as File Index, Compound Index, etc.)
1292# in the output.
1293
1294LATEX_HIDE_INDICES     = NO
1295
1296# If LATEX_SOURCE_CODE is set to YES then doxygen will include
1297# source code with syntax highlighting in the LaTeX output.
1298# Note that which sources are shown also depends on other settings
1299# such as SOURCE_BROWSER.
1300
1301LATEX_SOURCE_CODE      = NO
1302
1303# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1304# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
1305# http://en.wikipedia.org/wiki/BibTeX for more info.
1306
1307LATEX_BIB_STYLE        = plain
1308
1309#---------------------------------------------------------------------------
1310# configuration options related to the RTF output
1311#---------------------------------------------------------------------------
1312
1313# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1314# The RTF output is optimized for Word 97 and may not look very pretty with
1315# other RTF readers or editors.
1316
1317GENERATE_RTF           = NO
1318
1319# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1320# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1321# put in front of it. If left blank `rtf' will be used as the default path.
1322
1323RTF_OUTPUT             = rtf
1324
1325# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1326# RTF documents. This may be useful for small projects and may help to
1327# save some trees in general.
1328
1329COMPACT_RTF            = NO
1330
1331# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1332# will contain hyperlink fields. The RTF file will
1333# contain links (just like the HTML output) instead of page references.
1334# This makes the output suitable for online browsing using WORD or other
1335# programs which support those fields.
1336# Note: wordpad (write) and others do not support links.
1337
1338RTF_HYPERLINKS         = NO
1339
1340# Load style sheet definitions from file. Syntax is similar to doxygen's
1341# config file, i.e. a series of assignments. You only have to provide
1342# replacements, missing definitions are set to their default value.
1343
1344RTF_STYLESHEET_FILE    =
1345
1346# Set optional variables used in the generation of an rtf document.
1347# Syntax is similar to doxygen's config file.
1348
1349RTF_EXTENSIONS_FILE    =
1350
1351#---------------------------------------------------------------------------
1352# configuration options related to the man page output
1353#---------------------------------------------------------------------------
1354
1355# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1356# generate man pages
1357
1358GENERATE_MAN           = NO
1359
1360# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1361# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1362# put in front of it. If left blank `man' will be used as the default path.
1363
1364MAN_OUTPUT             = man
1365
1366# The MAN_EXTENSION tag determines the extension that is added to
1367# the generated man pages (default is the subroutine's section .3)
1368
1369MAN_EXTENSION          = .3
1370
1371# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1372# then it will generate one additional man file for each entity
1373# documented in the real man page(s). These additional files
1374# only source the real man page, but without them the man command
1375# would be unable to find the correct page. The default is NO.
1376
1377MAN_LINKS              = NO
1378
1379#---------------------------------------------------------------------------
1380# configuration options related to the XML output
1381#---------------------------------------------------------------------------
1382
1383# If the GENERATE_XML tag is set to YES Doxygen will
1384# generate an XML file that captures the structure of
1385# the code including all documentation.
1386
1387GENERATE_XML           = NO
1388
1389# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1390# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1391# put in front of it. If left blank `xml' will be used as the default path.
1392
1393XML_OUTPUT             = xml
1394
1395# The XML_SCHEMA tag can be used to specify an XML schema,
1396# which can be used by a validating XML parser to check the
1397# syntax of the XML files.
1398
1399XML_SCHEMA             =
1400
1401# The XML_DTD tag can be used to specify an XML DTD,
1402# which can be used by a validating XML parser to check the
1403# syntax of the XML files.
1404
1405XML_DTD                =
1406
1407# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1408# dump the program listings (including syntax highlighting
1409# and cross-referencing information) to the XML output. Note that
1410# enabling this will significantly increase the size of the XML output.
1411
1412XML_PROGRAMLISTING     = YES
1413
1414#---------------------------------------------------------------------------
1415# configuration options for the AutoGen Definitions output
1416#---------------------------------------------------------------------------
1417
1418# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1419# generate an AutoGen Definitions (see autogen.sf.net) file
1420# that captures the structure of the code including all
1421# documentation. Note that this feature is still experimental
1422# and incomplete at the moment.
1423
1424GENERATE_AUTOGEN_DEF   = NO
1425
1426#---------------------------------------------------------------------------
1427# configuration options related to the Perl module output
1428#---------------------------------------------------------------------------
1429
1430# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1431# generate a Perl module file that captures the structure of
1432# the code including all documentation. Note that this
1433# feature is still experimental and incomplete at the
1434# moment.
1435
1436GENERATE_PERLMOD       = NO
1437
1438# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1439# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1440# to generate PDF and DVI output from the Perl module output.
1441
1442PERLMOD_LATEX          = NO
1443
1444# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1445# nicely formatted so it can be parsed by a human reader.
1446# This is useful
1447# if you want to understand what is going on.
1448# On the other hand, if this
1449# tag is set to NO the size of the Perl module output will be much smaller
1450# and Perl will parse it just the same.
1451
1452PERLMOD_PRETTY         = YES
1453
1454# The names of the make variables in the generated doxyrules.make file
1455# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1456# This is useful so different doxyrules.make files included by the same
1457# Makefile don't overwrite each other's variables.
1458
1459PERLMOD_MAKEVAR_PREFIX =
1460
1461#---------------------------------------------------------------------------
1462# Configuration options related to the preprocessor
1463#---------------------------------------------------------------------------
1464
1465# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1466# evaluate all C-preprocessor directives found in the sources and include
1467# files.
1468
1469ENABLE_PREPROCESSING   = YES
1470
1471# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1472# names in the source code. If set to NO (the default) only conditional
1473# compilation will be performed. Macro expansion can be done in a controlled
1474# way by setting EXPAND_ONLY_PREDEF to YES.
1475
1476MACRO_EXPANSION        = NO
1477
1478# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1479# then the macro expansion is limited to the macros specified with the
1480# PREDEFINED and EXPAND_AS_DEFINED tags.
1481
1482EXPAND_ONLY_PREDEF     = NO
1483
1484# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1485# pointed to by INCLUDE_PATH will be searched when a #include is found.
1486
1487SEARCH_INCLUDES        = YES
1488
1489# The INCLUDE_PATH tag can be used to specify one or more directories that
1490# contain include files that are not input files but should be processed by
1491# the preprocessor.
1492
1493INCLUDE_PATH           =
1494
1495# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1496# patterns (like *.h and *.hpp) to filter out the header-files in the
1497# directories. If left blank, the patterns specified with FILE_PATTERNS will
1498# be used.
1499
1500INCLUDE_FILE_PATTERNS  =
1501
1502# The PREDEFINED tag can be used to specify one or more macro names that
1503# are defined before the preprocessor is started (similar to the -D option of
1504# gcc). The argument of the tag is a list of macros of the form: name
1505# or name=definition (no spaces). If the definition and the = are
1506# omitted =1 is assumed. To prevent a macro definition from being
1507# undefined via #undef or recursively expanded use the := operator
1508# instead of the = operator.
1509
1510PREDEFINED             =
1511
1512# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1513# this tag can be used to specify a list of macro names that should be expanded.
1514# The macro definition that is found in the sources will be used.
1515# Use the PREDEFINED tag if you want to use a different macro definition that
1516# overrules the definition found in the source code.
1517
1518EXPAND_AS_DEFINED      =
1519
1520# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1521# doxygen's preprocessor will remove all references to function-like macros
1522# that are alone on a line, have an all uppercase name, and do not end with a
1523# semicolon, because these will confuse the parser if not removed.
1524
1525SKIP_FUNCTION_MACROS   = YES
1526
1527#---------------------------------------------------------------------------
1528# Configuration::additions related to external references
1529#---------------------------------------------------------------------------
1530
1531# The TAGFILES option can be used to specify one or more tagfiles.
1532# Optionally an initial location of the external documentation
1533# can be added for each tagfile. The format of a tag file without
1534# this location is as follows:
1535#
1536# TAGFILES = file1 file2 ...
1537# Adding location for the tag files is done as follows:
1538#
1539# TAGFILES = file1=loc1 "file2 = loc2" ...
1540# where "loc1" and "loc2" can be relative or absolute paths or
1541# URLs. If a location is present for each tag, the installdox tool
1542# does not have to be run to correct the links.
1543# Note that each tag file must have a unique name
1544# (where the name does NOT include the path)
1545# If a tag file is not located in the directory in which doxygen
1546# is run, you must also specify the path to the tagfile here.
1547
1548TAGFILES               =
1549
1550# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1551# a tag file that is based on the input files it reads.
1552
1553GENERATE_TAGFILE       =
1554
1555# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1556# in the class index. If set to NO only the inherited external classes
1557# will be listed.
1558
1559ALLEXTERNALS           = NO
1560
1561# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1562# in the modules index. If set to NO, only the current project's groups will
1563# be listed.
1564
1565EXTERNAL_GROUPS        = YES
1566
1567# The PERL_PATH should be the absolute path and name of the perl script
1568# interpreter (i.e. the result of `which perl').
1569
1570PERL_PATH              = /usr/bin/perl
1571
1572#---------------------------------------------------------------------------
1573# Configuration options related to the dot tool
1574#---------------------------------------------------------------------------
1575
1576# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1577# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1578# or super classes. Setting the tag to NO turns the diagrams off. Note that
1579# this option also works with HAVE_DOT disabled, but it is recommended to
1580# install and use dot, since it yields more powerful graphs.
1581
1582CLASS_DIAGRAMS         = YES
1583
1584# You can define message sequence charts within doxygen comments using the \msc
1585# command. Doxygen will then run the mscgen tool (see
1586# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1587# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1588# the mscgen tool resides. If left empty the tool is assumed to be found in the
1589# default search path.
1590
1591MSCGEN_PATH            =
1592
1593# If set to YES, the inheritance and collaboration graphs will hide
1594# inheritance and usage relations if the target is undocumented
1595# or is not a class.
1596
1597HIDE_UNDOC_RELATIONS   = YES
1598
1599# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1600# available from the path. This tool is part of Graphviz, a graph visualization
1601# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1602# have no effect if this option is set to NO (the default)
1603
1604HAVE_DOT               = NO
1605
1606# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1607# allowed to run in parallel. When set to 0 (the default) doxygen will
1608# base this on the number of processors available in the system. You can set it
1609# explicitly to a value larger than 0 to get control over the balance
1610# between CPU load and processing speed.
1611
1612DOT_NUM_THREADS        = 0
1613
1614# By default doxygen will use the Helvetica font for all dot files that
1615# doxygen generates. When you want a differently looking font you can specify
1616# the font name using DOT_FONTNAME. You need to make sure dot is able to find
1617# the font, which can be done by putting it in a standard location or by setting
1618# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
1619# directory containing the font.
1620
1621DOT_FONTNAME           = Helvetica
1622
1623# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1624# The default size is 10pt.
1625
1626DOT_FONTSIZE           = 10
1627
1628# By default doxygen will tell dot to use the Helvetica font.
1629# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
1630# set the path where dot can find it.
1631
1632DOT_FONTPATH           =
1633
1634# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1635# will generate a graph for each documented class showing the direct and
1636# indirect inheritance relations. Setting this tag to YES will force the
1637# CLASS_DIAGRAMS tag to NO.
1638
1639CLASS_GRAPH            = YES
1640
1641# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1642# will generate a graph for each documented class showing the direct and
1643# indirect implementation dependencies (inheritance, containment, and
1644# class references variables) of the class with other documented classes.
1645
1646COLLABORATION_GRAPH    = YES
1647
1648# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1649# will generate a graph for groups, showing the direct groups dependencies
1650
1651GROUP_GRAPHS           = YES
1652
1653# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1654# collaboration diagrams in a style similar to the OMG's Unified Modeling
1655# Language.
1656
1657UML_LOOK               = NO
1658
1659# If set to YES, the inheritance and collaboration graphs will show the
1660# relations between templates and their instances.
1661
1662TEMPLATE_RELATIONS     = NO
1663
1664# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1665# tags are set to YES then doxygen will generate a graph for each documented
1666# file showing the direct and indirect include dependencies of the file with
1667# other documented files.
1668
1669INCLUDE_GRAPH          = YES
1670
1671# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1672# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1673# documented header file showing the documented files that directly or
1674# indirectly include this file.
1675
1676INCLUDED_BY_GRAPH      = YES
1677
1678# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1679# doxygen will generate a call dependency graph for every global function
1680# or class method. Note that enabling this option will significantly increase
1681# the time of a run. So in most cases it will be better to enable call graphs
1682# for selected functions only using the \callgraph command.
1683
1684CALL_GRAPH             = NO
1685
1686# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1687# doxygen will generate a caller dependency graph for every global function
1688# or class method. Note that enabling this option will significantly increase
1689# the time of a run. So in most cases it will be better to enable caller
1690# graphs for selected functions only using the \callergraph command.
1691
1692CALLER_GRAPH           = NO
1693
1694# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1695# will generate a graphical hierarchy of all classes instead of a textual one.
1696
1697GRAPHICAL_HIERARCHY    = YES
1698
1699# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1700# then doxygen will show the dependencies a directory has on other directories
1701# in a graphical way. The dependency relations are determined by the #include
1702# relations between the files in the directories.
1703
1704DIRECTORY_GRAPH        = YES
1705
1706# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1707# generated by dot. Possible values are svg, png, jpg, or gif.
1708# If left blank png will be used. If you choose svg you need to set
1709# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1710# visible in IE 9+ (other browsers do not have this requirement).
1711
1712DOT_IMAGE_FORMAT       = png
1713
1714# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1715# enable generation of interactive SVG images that allow zooming and panning.
1716# Note that this requires a modern browser other than Internet Explorer.
1717# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1718# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1719# visible. Older versions of IE do not have SVG support.
1720
1721INTERACTIVE_SVG        = NO
1722
1723# The tag DOT_PATH can be used to specify the path where the dot tool can be
1724# found. If left blank, it is assumed the dot tool can be found in the path.
1725
1726DOT_PATH               =
1727
1728# The DOTFILE_DIRS tag can be used to specify one or more directories that
1729# contain dot files that are included in the documentation (see the
1730# \dotfile command).
1731
1732DOTFILE_DIRS           =
1733
1734# The MSCFILE_DIRS tag can be used to specify one or more directories that
1735# contain msc files that are included in the documentation (see the
1736# \mscfile command).
1737
1738MSCFILE_DIRS           =
1739
1740# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1741# nodes that will be shown in the graph. If the number of nodes in a graph
1742# becomes larger than this value, doxygen will truncate the graph, which is
1743# visualized by representing a node as a red box. Note that doxygen if the
1744# number of direct children of the root node in a graph is already larger than
1745# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1746# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1747
1748DOT_GRAPH_MAX_NODES    = 50
1749
1750# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1751# graphs generated by dot. A depth value of 3 means that only nodes reachable
1752# from the root by following a path via at most 3 edges will be shown. Nodes
1753# that lay further from the root node will be omitted. Note that setting this
1754# option to 1 or 2 may greatly reduce the computation time needed for large
1755# code bases. Also note that the size of a graph can be further restricted by
1756# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1757
1758MAX_DOT_GRAPH_DEPTH    = 0
1759
1760# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1761# background. This is disabled by default, because dot on Windows does not
1762# seem to support this out of the box. Warning: Depending on the platform used,
1763# enabling this option may lead to badly anti-aliased labels on the edges of
1764# a graph (i.e. they become hard to read).
1765
1766DOT_TRANSPARENT        = NO
1767
1768# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1769# files in one run (i.e. multiple -o and -T options on the command line). This
1770# makes dot run faster, but since only newer versions of dot (>1.8.10)
1771# support this, this feature is disabled by default.
1772
1773DOT_MULTI_TARGETS      = YES
1774
1775# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1776# generate a legend page explaining the meaning of the various boxes and
1777# arrows in the dot generated graphs.
1778
1779GENERATE_LEGEND        = YES
1780
1781# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1782# remove the intermediate dot files that are used to generate
1783# the various graphs.
1784
1785DOT_CLEANUP            = YES
1786