Ruby.py revision 10122 
1# Copyright (c) 2012 ARM Limited
2# All rights reserved.
3#
4# The license below extends only to copyright in the software and shall
5# not be construed as granting a license to any other intellectual
6# property including but not limited to intellectual property relating
7# to a hardware implementation of the functionality of the software
8# licensed hereunder.  You may use the software subject to the license
9# terms below provided that you ensure that this notice is replicated
10# unmodified and in its entirety in all distributions of the software,
11# modified or unmodified, in source code or in binary form.
12#
13# Copyright (c) 2006-2007 The Regents of The University of Michigan
14# Copyright (c) 2009 Advanced Micro Devices, Inc.
15# All rights reserved.
16#
17# Redistribution and use in source and binary forms, with or without
18# modification, are permitted provided that the following conditions are
19# met: redistributions of source code must retain the above copyright
20# notice, this list of conditions and the following disclaimer;
21# redistributions in binary form must reproduce the above copyright
22# notice, this list of conditions and the following disclaimer in the
23# documentation and/or other materials provided with the distribution;
24# neither the name of the copyright holders nor the names of its
25# contributors may be used to endorse or promote products derived from
26# this software without specific prior written permission.
27#
28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39#
40# Authors: Brad Beckmann
41
42import math
43import m5
44from m5.objects import *
45from m5.defines import buildEnv
46from m5.util import addToPath, fatal
47
48addToPath('../topologies')
49
50def define_options(parser):
51    # By default, ruby uses the simple timing cpu
52    parser.set_defaults(cpu_type="timing")
53
54    parser.add_option("--ruby-clock", action="store", type="string",
55                      default='2GHz',
56                      help="Clock for blocks running at Ruby system's speed")
57
58    # Options related to cache structure
59    parser.add_option("--ports", action="store", type="int", default=4,
60                      help="used of transitions per cycle which is a proxy \
61                            for the number of ports.")
62
63    # ruby network options
64    parser.add_option("--topology", type="string", default="Crossbar",
65                 help="check src/mem/ruby/network/topologies for complete set")
66    parser.add_option("--mesh-rows", type="int", default=1,
67                      help="the number of rows in the mesh topology")
68    parser.add_option("--garnet-network", type="choice",
69                      choices=['fixed', 'flexible'], help="'fixed'|'flexible'")
70    parser.add_option("--network-fault-model", action="store_true", default=False,
71                      help="enable network fault model: see src/mem/ruby/network/fault_model/")
72
73    # ruby mapping options
74    parser.add_option("--numa-high-bit", type="int", default=0,
75                      help="high order address bit to use for numa mapping. " \
76                           "0 = highest bit, not specified = lowest bit")
77
78    # ruby sparse memory options
79    parser.add_option("--use-map", action="store_true", default=False)
80    parser.add_option("--map-levels", type="int", default=4)
81
82    parser.add_option("--recycle-latency", type="int", default=10,
83                      help="Recycle latency for ruby controller input buffers")
84
85    parser.add_option("--random_seed", type="int", default=1234,
86                      help="Used for seeding the random number generator")
87
88    parser.add_option("--ruby_stats", type="string", default="ruby.stats")
89
90    protocol = buildEnv['PROTOCOL']
91    exec "import %s" % protocol
92    eval("%s.define_options(parser)" % protocol)
93
94def create_topology(controllers, options):
95    """ Called from create_system in configs/ruby/<protocol>.py
96        Must return an object which is a subclass of BaseTopology
97        found in configs/topologies/BaseTopology.py
98        This is a wrapper for the legacy topologies.
99    """
100    exec "import %s as Topo" % options.topology
101    topology = eval("Topo.%s(controllers)" % options.topology)
102    return topology
103
104def create_system(options, system, piobus = None, dma_ports = []):
105
106    system.ruby = RubySystem(no_mem_vec = options.use_map)
107    ruby = system.ruby
108
109    protocol = buildEnv['PROTOCOL']
110    exec "import %s" % protocol
111    try:
112        (cpu_sequencers, dir_cntrls, topology) = \
113             eval("%s.create_system(options, system, dma_ports, ruby)"
114                  % protocol)
115    except:
116        print "Error: could not create sytem for ruby protocol %s" % protocol
117        raise
118
119    # Create a port proxy for connecting the system port. This is
120    # independent of the protocol and kept in the protocol-agnostic
121    # part (i.e. here).
122    sys_port_proxy = RubyPortProxy(ruby_system = ruby)
123    # Give the system port proxy a SimObject parent without creating a
124    # full-fledged controller
125    system.sys_port_proxy = sys_port_proxy
126
127    # Connect the system port for loading of binaries etc
128    system.system_port = system.sys_port_proxy.slave
129
130
131    #
132    # Set the network classes based on the command line options
133    #
134    if options.garnet_network == "fixed":
135        NetworkClass = GarnetNetwork_d
136        IntLinkClass = GarnetIntLink_d
137        ExtLinkClass = GarnetExtLink_d
138        RouterClass = GarnetRouter_d
139        InterfaceClass = GarnetNetworkInterface_d
140
141    elif options.garnet_network == "flexible":
142        NetworkClass = GarnetNetwork
143        IntLinkClass = GarnetIntLink
144        ExtLinkClass = GarnetExtLink
145        RouterClass = GarnetRouter
146        InterfaceClass = GarnetNetworkInterface
147
148    else:
149        NetworkClass = SimpleNetwork
150        IntLinkClass = SimpleIntLink
151        ExtLinkClass = SimpleExtLink
152        RouterClass = Switch
153        InterfaceClass = None
154
155
156    # Create the network topology
157    network = NetworkClass(ruby_system = ruby, topology = topology.description,
158            routers = [], ext_links = [], int_links = [], netifs = [])
159    topology.makeTopology(options, network, IntLinkClass, ExtLinkClass,
160            RouterClass)
161
162    if InterfaceClass != None:
163        netifs = [InterfaceClass(id=i) for (i,n) in enumerate(network.ext_links)]
164        network.netifs = netifs
165
166    if options.network_fault_model:
167        assert(options.garnet_network == "fixed")
168        network.enable_fault_model = True
169        network.fault_model = FaultModel()
170
171    #
172    # Loop through the directory controlers.
173    # Determine the total memory size of the ruby system and verify it is equal
174    # to physmem.  However, if Ruby memory is using sparse memory in SE
175    # mode, then the system should not back-up the memory state with
176    # the Memory Vector and thus the memory size bytes should stay at 0.
177    # Also set the numa bits to the appropriate values.
178    #
179    total_mem_size = MemorySize('0B')
180
181    ruby.block_size_bytes = options.cacheline_size
182    block_size_bits = int(math.log(options.cacheline_size, 2))
183
184    if options.numa_high_bit:
185        numa_bit = options.numa_high_bit
186    else:
187        # if the numa_bit is not specified, set the directory bits as the
188        # lowest bits above the block offset bits, and the numa_bit as the
189        # highest of those directory bits
190        dir_bits = int(math.log(options.num_dirs, 2))
191        numa_bit = block_size_bits + dir_bits - 1
192
193    for dir_cntrl in dir_cntrls:
194        total_mem_size.value += dir_cntrl.directory.size.value
195        dir_cntrl.directory.numa_high_bit = numa_bit
196
197    phys_mem_size = sum(map(lambda r: r.size(), system.mem_ranges))
198    assert(total_mem_size.value == phys_mem_size)
199
200    ruby.network = network
201    ruby.mem_size = total_mem_size
202
203    # Connect the cpu sequencers and the piobus
204    if piobus != None:
205        for cpu_seq in cpu_sequencers:
206            cpu_seq.pio_master_port = piobus.slave
207            cpu_seq.mem_master_port = piobus.slave
208
209            if buildEnv['TARGET_ISA'] == "x86":
210                cpu_seq.pio_slave_port = piobus.master
211
212    ruby._cpu_ports = cpu_sequencers
213    ruby.num_of_sequencers = len(cpu_sequencers)
214    ruby.random_seed    = options.random_seed
215