MOESI_AMD_Base.py revision 13974 
1# Copyright (c) 2010-2015 Advanced Micro Devices, Inc.
2# All rights reserved.
3#
4# For use for simulation and test purposes only
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are met:
8#
9# 1. Redistributions of source code must retain the above copyright notice,
10# this list of conditions and the following disclaimer.
11#
12# 2. Redistributions in binary form must reproduce the above copyright notice,
13# this list of conditions and the following disclaimer in the documentation
14# and/or other materials provided with the distribution.
15#
16# 3. Neither the name of the copyright holder nor the names of its
17# contributors may be used to endorse or promote products derived from this
18# software without specific prior written permission.
19#
20# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
24# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30# POSSIBILITY OF SUCH DAMAGE.
31#
32# Authors: Lisa Hsu
33
34import math
35import m5
36from m5.objects import *
37from m5.defines import buildEnv
38from m5.util import addToPath
39from Ruby import create_topology
40from Ruby import send_evicts
41from common import FileSystemConfig
42
43addToPath('../')
44
45from topologies.Cluster import Cluster
46from topologies.Crossbar import Crossbar
47
48class CntrlBase:
49    _seqs = 0
50    @classmethod
51    def seqCount(cls):
52        # Use SeqCount not class since we need global count
53        CntrlBase._seqs += 1
54        return CntrlBase._seqs - 1
55
56    _cntrls = 0
57    @classmethod
58    def cntrlCount(cls):
59        # Use CntlCount not class since we need global count
60        CntrlBase._cntrls += 1
61        return CntrlBase._cntrls - 1
62
63    _version = 0
64    @classmethod
65    def versionCount(cls):
66        cls._version += 1 # Use count for this particular type
67        return cls._version - 1
68
69class L1DCache(RubyCache):
70    resourceStalls = False
71    def create(self, options):
72        self.size = MemorySize(options.l1d_size)
73        self.assoc = options.l1d_assoc
74        self.replacement_policy = PseudoLRUReplacementPolicy()
75
76class L1ICache(RubyCache):
77    resourceStalls = False
78    def create(self, options):
79        self.size = MemorySize(options.l1i_size)
80        self.assoc = options.l1i_assoc
81        self.replacement_policy = PseudoLRUReplacementPolicy()
82
83class L2Cache(RubyCache):
84    resourceStalls = False
85    def create(self, options):
86        self.size = MemorySize(options.l2_size)
87        self.assoc = options.l2_assoc
88        self.replacement_policy = PseudoLRUReplacementPolicy()
89
90class CPCntrl(CorePair_Controller, CntrlBase):
91
92    def create(self, options, ruby_system, system):
93        self.version = self.versionCount()
94
95        self.L1Icache = L1ICache()
96        self.L1Icache.create(options)
97        self.L1D0cache = L1DCache()
98        self.L1D0cache.create(options)
99        self.L1D1cache = L1DCache()
100        self.L1D1cache.create(options)
101        self.L2cache = L2Cache()
102        self.L2cache.create(options)
103
104        self.sequencer = RubySequencer()
105        self.sequencer.version = self.seqCount()
106        self.sequencer.icache = self.L1Icache
107        self.sequencer.dcache = self.L1D0cache
108        self.sequencer.ruby_system = ruby_system
109        self.sequencer.coreid = 0
110        self.sequencer.is_cpu_sequencer = True
111
112        self.sequencer1 = RubySequencer()
113        self.sequencer1.version = self.seqCount()
114        self.sequencer1.icache = self.L1Icache
115        self.sequencer1.dcache = self.L1D1cache
116        self.sequencer1.ruby_system = ruby_system
117        self.sequencer1.coreid = 1
118        self.sequencer1.is_cpu_sequencer = True
119
120        # Defines icache/dcache hit latency
121        self.mandatory_queue_latency = 2
122
123        self.issue_latency = options.cpu_to_dir_latency
124        self.send_evictions = send_evicts(options)
125
126        self.ruby_system = ruby_system
127
128        if options.recycle_latency:
129            self.recycle_latency = options.recycle_latency
130
131class L3Cache(RubyCache):
132    assoc = 8
133    dataArrayBanks = 256
134    tagArrayBanks = 256
135
136    def create(self, options, ruby_system, system):
137        self.size = MemorySize(options.l3_size)
138        self.size.value /= options.num_dirs
139        self.dataArrayBanks /= options.num_dirs
140        self.tagArrayBanks /= options.num_dirs
141        self.dataArrayBanks /= options.num_dirs
142        self.tagArrayBanks /= options.num_dirs
143        self.dataAccessLatency = options.l3_data_latency
144        self.tagAccessLatency = options.l3_tag_latency
145        self.resourceStalls = options.no_resource_stalls
146        self.replacement_policy = PseudoLRUReplacementPolicy()
147
148class L3Cntrl(L3Cache_Controller, CntrlBase):
149    def create(self, options, ruby_system, system):
150        self.version = self.versionCount()
151        self.L3cache = L3Cache()
152        self.L3cache.create(options, ruby_system, system)
153
154        self.l3_response_latency = max(self.L3cache.dataAccessLatency,
155                                       self.L3cache.tagAccessLatency)
156        self.ruby_system = ruby_system
157
158        if options.recycle_latency:
159            self.recycle_latency = options.recycle_latency
160
161    def connectWireBuffers(self, req_to_dir, resp_to_dir, l3_unblock_to_dir,
162                           req_to_l3, probe_to_l3, resp_to_l3):
163        self.reqToDir = req_to_dir
164        self.respToDir = resp_to_dir
165        self.l3UnblockToDir = l3_unblock_to_dir
166        self.reqToL3 = req_to_l3
167        self.probeToL3 = probe_to_l3
168        self.respToL3 = resp_to_l3
169
170class DirCntrl(Directory_Controller, CntrlBase):
171    def create(self, options, dir_ranges, ruby_system, system):
172        self.version = self.versionCount()
173
174        self.response_latency = 30
175
176        self.addr_ranges = dir_ranges
177        self.directory = RubyDirectoryMemory()
178
179        self.L3CacheMemory = L3Cache()
180        self.L3CacheMemory.create(options, ruby_system, system)
181
182        self.l3_hit_latency = max(self.L3CacheMemory.dataAccessLatency,
183                                  self.L3CacheMemory.tagAccessLatency)
184
185        self.number_of_TBEs = options.num_tbes
186
187        self.ruby_system = ruby_system
188
189        if options.recycle_latency:
190            self.recycle_latency = options.recycle_latency
191
192        self.CPUonly = True
193
194    def connectWireBuffers(self, req_to_dir, resp_to_dir, l3_unblock_to_dir,
195                           req_to_l3, probe_to_l3, resp_to_l3):
196        self.reqToDir = req_to_dir
197        self.respToDir = resp_to_dir
198        self.l3UnblockToDir = l3_unblock_to_dir
199        self.reqToL3 = req_to_l3
200        self.probeToL3 = probe_to_l3
201        self.respToL3 = resp_to_l3
202
203def define_options(parser):
204    parser.add_option("--num-subcaches", type="int", default=4)
205    parser.add_option("--l3-data-latency", type="int", default=20)
206    parser.add_option("--l3-tag-latency", type="int", default=15)
207    parser.add_option("--cpu-to-dir-latency", type="int", default=15)
208    parser.add_option("--no-resource-stalls", action="store_false",
209                      default=True)
210    parser.add_option("--num-tbes", type="int", default=256)
211    parser.add_option("--l2-latency", type="int", default=50) # load to use
212
213def create_system(options, full_system, system, dma_devices, bootmem,
214                  ruby_system):
215    if buildEnv['PROTOCOL'] != 'MOESI_AMD_Base':
216        panic("This script requires the MOESI_AMD_Base protocol.")
217
218    cpu_sequencers = []
219
220    #
221    # The ruby network creation expects the list of nodes in the system to
222    # be consistent with the NetDest list.  Therefore the l1 controller
223    # nodes must be listed before the directory nodes and directory nodes
224    # before dma nodes, etc.
225    #
226    l1_cntrl_nodes = []
227    l3_cntrl_nodes = []
228    dir_cntrl_nodes = []
229
230    control_count = 0
231
232    #
233    # Must create the individual controllers before the network to ensure
234    # the controller constructors are called before the network constructor
235    #
236
237    # This is the base crossbar that connects the L3s, Dirs, and cpu
238    # Cluster
239    mainCluster = Cluster(extBW = 512, intBW = 512) # 1 TB/s
240
241    if options.numa_high_bit:
242        numa_bit = options.numa_high_bit
243    else:
244        # if the numa_bit is not specified, set the directory bits as the
245        # lowest bits above the block offset bits, and the numa_bit as the
246        # highest of those directory bits
247        dir_bits = int(math.log(options.num_dirs, 2))
248        block_size_bits = int(math.log(options.cacheline_size, 2))
249        numa_bit = block_size_bits + dir_bits - 1
250
251    for i in range(options.num_dirs):
252        dir_ranges = []
253        for r in system.mem_ranges:
254            addr_range = m5.objects.AddrRange(r.start, size = r.size(),
255                                              intlvHighBit = numa_bit,
256                                              intlvBits = dir_bits,
257                                              intlvMatch = i)
258            dir_ranges.append(addr_range)
259
260
261        dir_cntrl = DirCntrl(TCC_select_num_bits = 0)
262        dir_cntrl.create(options, dir_ranges, ruby_system, system)
263
264        # Connect the Directory controller to the ruby network
265        dir_cntrl.requestFromCores = MessageBuffer(ordered = True)
266        dir_cntrl.requestFromCores.slave = ruby_system.network.master
267
268        dir_cntrl.responseFromCores = MessageBuffer()
269        dir_cntrl.responseFromCores.slave = ruby_system.network.master
270
271        dir_cntrl.unblockFromCores = MessageBuffer()
272        dir_cntrl.unblockFromCores.slave = ruby_system.network.master
273
274        dir_cntrl.probeToCore = MessageBuffer()
275        dir_cntrl.probeToCore.master = ruby_system.network.slave
276
277        dir_cntrl.responseToCore = MessageBuffer()
278        dir_cntrl.responseToCore.master = ruby_system.network.slave
279
280        dir_cntrl.triggerQueue = MessageBuffer(ordered = True)
281        dir_cntrl.L3triggerQueue = MessageBuffer(ordered = True)
282        dir_cntrl.responseFromMemory = MessageBuffer()
283
284        exec("system.dir_cntrl%d = dir_cntrl" % i)
285        dir_cntrl_nodes.append(dir_cntrl)
286
287        mainCluster.add(dir_cntrl)
288
289    # Technically this config can support an odd number of cpus, but the top
290    # level config files, such as the ruby_random_tester, will get confused if
291    # the number of cpus does not equal the number of sequencers.  Thus make
292    # sure that an even number of cpus is specified.
293    assert((options.num_cpus % 2) == 0)
294
295    # For an odd number of CPUs, still create the right number of controllers
296    cpuCluster = Cluster(extBW = 512, intBW = 512)  # 1 TB/s
297    for i in range((options.num_cpus + 1) // 2):
298
299        cp_cntrl = CPCntrl()
300        cp_cntrl.create(options, ruby_system, system)
301
302        exec("system.cp_cntrl%d = cp_cntrl" % i)
303        #
304        # Add controllers and sequencers to the appropriate lists
305        #
306        cpu_sequencers.extend([cp_cntrl.sequencer, cp_cntrl.sequencer1])
307
308        # Connect the CP controllers and the network
309        cp_cntrl.requestFromCore = MessageBuffer()
310        cp_cntrl.requestFromCore.master = ruby_system.network.slave
311
312        cp_cntrl.responseFromCore = MessageBuffer()
313        cp_cntrl.responseFromCore.master = ruby_system.network.slave
314
315        cp_cntrl.unblockFromCore = MessageBuffer()
316        cp_cntrl.unblockFromCore.master = ruby_system.network.slave
317
318        cp_cntrl.probeToCore = MessageBuffer()
319        cp_cntrl.probeToCore.slave = ruby_system.network.master
320
321        cp_cntrl.responseToCore = MessageBuffer()
322        cp_cntrl.responseToCore.slave = ruby_system.network.master
323
324        cp_cntrl.mandatoryQueue = MessageBuffer()
325        cp_cntrl.triggerQueue = MessageBuffer(ordered = True)
326
327        cpuCluster.add(cp_cntrl)
328
329    # Register CPUs and caches for each CorePair and directory (SE mode only)
330    if not full_system:
331        FileSystemConfig.config_filesystem(options)
332        for i in xrange((options.num_cpus + 1) // 2):
333            FileSystemConfig.register_cpu(physical_package_id = 0,
334                                          core_siblings =
335                                            xrange(options.num_cpus),
336                                          core_id = i*2,
337                                          thread_siblings = [])
338
339            FileSystemConfig.register_cpu(physical_package_id = 0,
340                                          core_siblings =
341                                            xrange(options.num_cpus),
342                                          core_id = i*2+1,
343                                          thread_siblings = [])
344
345            FileSystemConfig.register_cache(level = 0,
346                                            idu_type = 'Instruction',
347                                            size = options.l1i_size,
348                                            line_size = options.cacheline_size,
349                                            assoc = options.l1i_assoc,
350                                            cpus = [i*2, i*2+1])
351
352            FileSystemConfig.register_cache(level = 0,
353                                            idu_type = 'Data',
354                                            size = options.l1d_size,
355                                            line_size = options.cacheline_size,
356                                            assoc = options.l1d_assoc,
357                                            cpus = [i*2])
358
359            FileSystemConfig.register_cache(level = 0,
360                                            idu_type = 'Data',
361                                            size = options.l1d_size,
362                                            line_size = options.cacheline_size,
363                                            assoc = options.l1d_assoc,
364                                            cpus = [i*2+1])
365
366            FileSystemConfig.register_cache(level = 1,
367                                            idu_type = 'Unified',
368                                            size = options.l2_size,
369                                            line_size = options.cacheline_size,
370                                            assoc = options.l2_assoc,
371                                            cpus = [i*2, i*2+1])
372
373        for i in range(options.num_dirs):
374            FileSystemConfig.register_cache(level = 2,
375                                            idu_type = 'Unified',
376                                            size = options.l3_size,
377                                            line_size = options.cacheline_size,
378                                            assoc = options.l3_assoc,
379                                            cpus = [n for n in
380                                                xrange(options.num_cpus)])
381
382    # Assuming no DMA devices
383    assert(len(dma_devices) == 0)
384
385    # Add cpu/gpu clusters to main cluster
386    mainCluster.add(cpuCluster)
387
388    ruby_system.network.number_of_virtual_networks = 10
389
390    return (cpu_sequencers, dir_cntrl_nodes, mainCluster)
391