Simulation.py revision 12374:df27dd3da16d
1# Copyright (c) 2012-2013 ARM Limited 2# All rights reserved 3# 4# The license below extends only to copyright in the software and shall 5# not be construed as granting a license to any other intellectual 6# property including but not limited to intellectual property relating 7# to a hardware implementation of the functionality of the software 8# licensed hereunder. You may use the software subject to the license 9# terms below provided that you ensure that this notice is replicated 10# unmodified and in its entirety in all distributions of the software, 11# modified or unmodified, in source code or in binary form. 12# 13# Copyright (c) 2006-2008 The Regents of The University of Michigan 14# Copyright (c) 2010 Advanced Micro Devices, Inc. 15# All rights reserved. 16# 17# Redistribution and use in source and binary forms, with or without 18# modification, are permitted provided that the following conditions are 19# met: redistributions of source code must retain the above copyright 20# notice, this list of conditions and the following disclaimer; 21# redistributions in binary form must reproduce the above copyright 22# notice, this list of conditions and the following disclaimer in the 23# documentation and/or other materials provided with the distribution; 24# neither the name of the copyright holders nor the names of its 25# contributors may be used to endorse or promote products derived from 26# this software without specific prior written permission. 27# 28# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 31# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 33# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 34# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 38# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39# 40# Authors: Lisa Hsu 41 42import sys 43from os import getcwd 44from os.path import join as joinpath 45 46from common import CpuConfig 47from common import MemConfig 48 49import m5 50from m5.defines import buildEnv 51from m5.objects import * 52from m5.util import * 53 54addToPath('../common') 55 56def getCPUClass(cpu_type): 57 """Returns the required cpu class and the mode of operation.""" 58 cls = CpuConfig.get(cpu_type) 59 return cls, cls.memory_mode() 60 61def setCPUClass(options): 62 """Returns two cpu classes and the initial mode of operation. 63 64 Restoring from a checkpoint or fast forwarding through a benchmark 65 can be done using one type of cpu, and then the actual 66 simulation can be carried out using another type. This function 67 returns these two types of cpus and the initial mode of operation 68 depending on the options provided. 69 """ 70 71 TmpClass, test_mem_mode = getCPUClass(options.cpu_type) 72 CPUClass = None 73 if TmpClass.require_caches() and \ 74 not options.caches and not options.ruby: 75 fatal("%s must be used with caches" % options.cpu_type) 76 77 if options.checkpoint_restore != None: 78 if options.restore_with_cpu != options.cpu_type: 79 CPUClass = TmpClass 80 TmpClass, test_mem_mode = getCPUClass(options.restore_with_cpu) 81 elif options.fast_forward: 82 CPUClass = TmpClass 83 TmpClass = AtomicSimpleCPU 84 test_mem_mode = 'atomic' 85 86 return (TmpClass, test_mem_mode, CPUClass) 87 88def setMemClass(options): 89 """Returns a memory controller class.""" 90 91 return MemConfig.get(options.mem_type) 92 93def setWorkCountOptions(system, options): 94 if options.work_item_id != None: 95 system.work_item_id = options.work_item_id 96 if options.num_work_ids != None: 97 system.num_work_ids = options.num_work_ids 98 if options.work_begin_cpu_id_exit != None: 99 system.work_begin_cpu_id_exit = options.work_begin_cpu_id_exit 100 if options.work_end_exit_count != None: 101 system.work_end_exit_count = options.work_end_exit_count 102 if options.work_end_checkpoint_count != None: 103 system.work_end_ckpt_count = options.work_end_checkpoint_count 104 if options.work_begin_exit_count != None: 105 system.work_begin_exit_count = options.work_begin_exit_count 106 if options.work_begin_checkpoint_count != None: 107 system.work_begin_ckpt_count = options.work_begin_checkpoint_count 108 if options.work_cpus_checkpoint_count != None: 109 system.work_cpus_ckpt_count = options.work_cpus_checkpoint_count 110 111def findCptDir(options, cptdir, testsys): 112 """Figures out the directory from which the checkpointed state is read. 113 114 There are two different ways in which the directories holding checkpoints 115 can be named -- 116 1. cpt.<benchmark name>.<instruction count when the checkpoint was taken> 117 2. cpt.<some number, usually the tick value when the checkpoint was taken> 118 119 This function parses through the options to figure out which one of the 120 above should be used for selecting the checkpoint, and then figures out 121 the appropriate directory. 122 """ 123 124 from os.path import isdir, exists 125 from os import listdir 126 import re 127 128 if not isdir(cptdir): 129 fatal("checkpoint dir %s does not exist!", cptdir) 130 131 cpt_starttick = 0 132 if options.at_instruction or options.simpoint: 133 inst = options.checkpoint_restore 134 if options.simpoint: 135 # assume workload 0 has the simpoint 136 if testsys.cpu[0].workload[0].simpoint == 0: 137 fatal('Unable to find simpoint') 138 inst += int(testsys.cpu[0].workload[0].simpoint) 139 140 checkpoint_dir = joinpath(cptdir, "cpt.%s.%s" % (options.bench, inst)) 141 if not exists(checkpoint_dir): 142 fatal("Unable to find checkpoint directory %s", checkpoint_dir) 143 144 elif options.restore_simpoint_checkpoint: 145 # Restore from SimPoint checkpoints 146 # Assumes that the checkpoint dir names are formatted as follows: 147 dirs = listdir(cptdir) 148 expr = re.compile('cpt\.simpoint_(\d+)_inst_(\d+)' + 149 '_weight_([\d\.e\-]+)_interval_(\d+)_warmup_(\d+)') 150 cpts = [] 151 for dir in dirs: 152 match = expr.match(dir) 153 if match: 154 cpts.append(dir) 155 cpts.sort() 156 157 cpt_num = options.checkpoint_restore 158 if cpt_num > len(cpts): 159 fatal('Checkpoint %d not found', cpt_num) 160 checkpoint_dir = joinpath(cptdir, cpts[cpt_num - 1]) 161 match = expr.match(cpts[cpt_num - 1]) 162 if match: 163 index = int(match.group(1)) 164 start_inst = int(match.group(2)) 165 weight_inst = float(match.group(3)) 166 interval_length = int(match.group(4)) 167 warmup_length = int(match.group(5)) 168 print "Resuming from", checkpoint_dir 169 simpoint_start_insts = [] 170 simpoint_start_insts.append(warmup_length) 171 simpoint_start_insts.append(warmup_length + interval_length) 172 testsys.cpu[0].simpoint_start_insts = simpoint_start_insts 173 if testsys.switch_cpus != None: 174 testsys.switch_cpus[0].simpoint_start_insts = simpoint_start_insts 175 176 print "Resuming from SimPoint", 177 print "#%d, start_inst:%d, weight:%f, interval:%d, warmup:%d" % \ 178 (index, start_inst, weight_inst, interval_length, warmup_length) 179 180 else: 181 dirs = listdir(cptdir) 182 expr = re.compile('cpt\.([0-9]+)') 183 cpts = [] 184 for dir in dirs: 185 match = expr.match(dir) 186 if match: 187 cpts.append(match.group(1)) 188 189 cpts.sort(lambda a,b: cmp(long(a), long(b))) 190 191 cpt_num = options.checkpoint_restore 192 if cpt_num > len(cpts): 193 fatal('Checkpoint %d not found', cpt_num) 194 195 cpt_starttick = int(cpts[cpt_num - 1]) 196 checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1]) 197 198 return cpt_starttick, checkpoint_dir 199 200def scriptCheckpoints(options, maxtick, cptdir): 201 if options.at_instruction or options.simpoint: 202 checkpoint_inst = int(options.take_checkpoints) 203 204 # maintain correct offset if we restored from some instruction 205 if options.checkpoint_restore != None: 206 checkpoint_inst += options.checkpoint_restore 207 208 print "Creating checkpoint at inst:%d" % (checkpoint_inst) 209 exit_event = m5.simulate() 210 exit_cause = exit_event.getCause() 211 print "exit cause = %s" % exit_cause 212 213 # skip checkpoint instructions should they exist 214 while exit_cause == "checkpoint": 215 exit_event = m5.simulate() 216 exit_cause = exit_event.getCause() 217 218 if exit_cause == "a thread reached the max instruction count": 219 m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \ 220 (options.bench, checkpoint_inst))) 221 print "Checkpoint written." 222 223 else: 224 when, period = options.take_checkpoints.split(",", 1) 225 when = int(when) 226 period = int(period) 227 num_checkpoints = 0 228 229 exit_event = m5.simulate(when - m5.curTick()) 230 exit_cause = exit_event.getCause() 231 while exit_cause == "checkpoint": 232 exit_event = m5.simulate(when - m5.curTick()) 233 exit_cause = exit_event.getCause() 234 235 if exit_cause == "simulate() limit reached": 236 m5.checkpoint(joinpath(cptdir, "cpt.%d")) 237 num_checkpoints += 1 238 239 sim_ticks = when 240 max_checkpoints = options.max_checkpoints 241 242 while num_checkpoints < max_checkpoints and \ 243 exit_cause == "simulate() limit reached": 244 if (sim_ticks + period) > maxtick: 245 exit_event = m5.simulate(maxtick - sim_ticks) 246 exit_cause = exit_event.getCause() 247 break 248 else: 249 exit_event = m5.simulate(period) 250 exit_cause = exit_event.getCause() 251 sim_ticks += period 252 while exit_event.getCause() == "checkpoint": 253 exit_event = m5.simulate(sim_ticks - m5.curTick()) 254 if exit_event.getCause() == "simulate() limit reached": 255 m5.checkpoint(joinpath(cptdir, "cpt.%d")) 256 num_checkpoints += 1 257 258 return exit_event 259 260def benchCheckpoints(options, maxtick, cptdir): 261 exit_event = m5.simulate(maxtick - m5.curTick()) 262 exit_cause = exit_event.getCause() 263 264 num_checkpoints = 0 265 max_checkpoints = options.max_checkpoints 266 267 while exit_cause == "checkpoint": 268 m5.checkpoint(joinpath(cptdir, "cpt.%d")) 269 num_checkpoints += 1 270 if num_checkpoints == max_checkpoints: 271 exit_cause = "maximum %d checkpoints dropped" % max_checkpoints 272 break 273 274 exit_event = m5.simulate(maxtick - m5.curTick()) 275 exit_cause = exit_event.getCause() 276 277 return exit_event 278 279# Set up environment for taking SimPoint checkpoints 280# Expecting SimPoint files generated by SimPoint 3.2 281def parseSimpointAnalysisFile(options, testsys): 282 import re 283 284 simpoint_filename, weight_filename, interval_length, warmup_length = \ 285 options.take_simpoint_checkpoints.split(",", 3) 286 print "simpoint analysis file:", simpoint_filename 287 print "simpoint weight file:", weight_filename 288 print "interval length:", interval_length 289 print "warmup length:", warmup_length 290 291 interval_length = int(interval_length) 292 warmup_length = int(warmup_length) 293 294 # Simpoint analysis output starts interval counts with 0. 295 simpoints = [] 296 simpoint_start_insts = [] 297 298 # Read in SimPoint analysis files 299 simpoint_file = open(simpoint_filename) 300 weight_file = open(weight_filename) 301 while True: 302 line = simpoint_file.readline() 303 if not line: 304 break 305 m = re.match("(\d+)\s+(\d+)", line) 306 if m: 307 interval = int(m.group(1)) 308 else: 309 fatal('unrecognized line in simpoint file!') 310 311 line = weight_file.readline() 312 if not line: 313 fatal('not enough lines in simpoint weight file!') 314 m = re.match("([0-9\.e\-]+)\s+(\d+)", line) 315 if m: 316 weight = float(m.group(1)) 317 else: 318 fatal('unrecognized line in simpoint weight file!') 319 320 if (interval * interval_length - warmup_length > 0): 321 starting_inst_count = \ 322 interval * interval_length - warmup_length 323 actual_warmup_length = warmup_length 324 else: 325 # Not enough room for proper warmup 326 # Just starting from the beginning 327 starting_inst_count = 0 328 actual_warmup_length = interval * interval_length 329 330 simpoints.append((interval, weight, starting_inst_count, 331 actual_warmup_length)) 332 333 # Sort SimPoints by starting inst count 334 simpoints.sort(key=lambda obj: obj[2]) 335 for s in simpoints: 336 interval, weight, starting_inst_count, actual_warmup_length = s 337 print str(interval), str(weight), starting_inst_count, \ 338 actual_warmup_length 339 simpoint_start_insts.append(starting_inst_count) 340 341 print "Total # of simpoints:", len(simpoints) 342 testsys.cpu[0].simpoint_start_insts = simpoint_start_insts 343 344 return (simpoints, interval_length) 345 346def takeSimpointCheckpoints(simpoints, interval_length, cptdir): 347 num_checkpoints = 0 348 index = 0 349 last_chkpnt_inst_count = -1 350 for simpoint in simpoints: 351 interval, weight, starting_inst_count, actual_warmup_length = simpoint 352 if starting_inst_count == last_chkpnt_inst_count: 353 # checkpoint starting point same as last time 354 # (when warmup period longer than starting point) 355 exit_cause = "simpoint starting point found" 356 code = 0 357 else: 358 exit_event = m5.simulate() 359 360 # skip checkpoint instructions should they exist 361 while exit_event.getCause() == "checkpoint": 362 print "Found 'checkpoint' exit event...ignoring..." 363 exit_event = m5.simulate() 364 365 exit_cause = exit_event.getCause() 366 code = exit_event.getCode() 367 368 if exit_cause == "simpoint starting point found": 369 m5.checkpoint(joinpath(cptdir, 370 "cpt.simpoint_%02d_inst_%d_weight_%f_interval_%d_warmup_%d" 371 % (index, starting_inst_count, weight, interval_length, 372 actual_warmup_length))) 373 print "Checkpoint #%d written. start inst:%d weight:%f" % \ 374 (num_checkpoints, starting_inst_count, weight) 375 num_checkpoints += 1 376 last_chkpnt_inst_count = starting_inst_count 377 else: 378 break 379 index += 1 380 381 print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause) 382 print "%d checkpoints taken" % num_checkpoints 383 sys.exit(code) 384 385def restoreSimpointCheckpoint(): 386 exit_event = m5.simulate() 387 exit_cause = exit_event.getCause() 388 389 if exit_cause == "simpoint starting point found": 390 print "Warmed up! Dumping and resetting stats!" 391 m5.stats.dump() 392 m5.stats.reset() 393 394 exit_event = m5.simulate() 395 exit_cause = exit_event.getCause() 396 397 if exit_cause == "simpoint starting point found": 398 print "Done running SimPoint!" 399 sys.exit(exit_event.getCode()) 400 401 print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause) 402 sys.exit(exit_event.getCode()) 403 404def repeatSwitch(testsys, repeat_switch_cpu_list, maxtick, switch_freq): 405 print "starting switch loop" 406 while True: 407 exit_event = m5.simulate(switch_freq) 408 exit_cause = exit_event.getCause() 409 410 if exit_cause != "simulate() limit reached": 411 return exit_event 412 413 m5.switchCpus(testsys, repeat_switch_cpu_list) 414 415 tmp_cpu_list = [] 416 for old_cpu, new_cpu in repeat_switch_cpu_list: 417 tmp_cpu_list.append((new_cpu, old_cpu)) 418 repeat_switch_cpu_list = tmp_cpu_list 419 420 if (maxtick - m5.curTick()) <= switch_freq: 421 exit_event = m5.simulate(maxtick - m5.curTick()) 422 return exit_event 423 424def run(options, root, testsys, cpu_class): 425 if options.checkpoint_dir: 426 cptdir = options.checkpoint_dir 427 elif m5.options.outdir: 428 cptdir = m5.options.outdir 429 else: 430 cptdir = getcwd() 431 432 if options.fast_forward and options.checkpoint_restore != None: 433 fatal("Can't specify both --fast-forward and --checkpoint-restore") 434 435 if options.standard_switch and not options.caches: 436 fatal("Must specify --caches when using --standard-switch") 437 438 if options.standard_switch and options.repeat_switch: 439 fatal("Can't specify both --standard-switch and --repeat-switch") 440 441 if options.repeat_switch and options.take_checkpoints: 442 fatal("Can't specify both --repeat-switch and --take-checkpoints") 443 444 np = options.num_cpus 445 switch_cpus = None 446 447 if options.prog_interval: 448 for i in xrange(np): 449 testsys.cpu[i].progress_interval = options.prog_interval 450 451 if options.maxinsts: 452 for i in xrange(np): 453 testsys.cpu[i].max_insts_any_thread = options.maxinsts 454 455 if cpu_class: 456 switch_cpus = [cpu_class(switched_out=True, cpu_id=(i)) 457 for i in xrange(np)] 458 459 for i in xrange(np): 460 if options.fast_forward: 461 testsys.cpu[i].max_insts_any_thread = int(options.fast_forward) 462 switch_cpus[i].system = testsys 463 switch_cpus[i].workload = testsys.cpu[i].workload 464 switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain 465 switch_cpus[i].progress_interval = \ 466 testsys.cpu[i].progress_interval 467 switch_cpus[i].isa = testsys.cpu[i].isa 468 # simulation period 469 if options.maxinsts: 470 switch_cpus[i].max_insts_any_thread = options.maxinsts 471 # Add checker cpu if selected 472 if options.checker: 473 switch_cpus[i].addCheckerCpu() 474 475 # If elastic tracing is enabled attach the elastic trace probe 476 # to the switch CPUs 477 if options.elastic_trace_en: 478 CpuConfig.config_etrace(cpu_class, switch_cpus, options) 479 480 testsys.switch_cpus = switch_cpus 481 switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)] 482 483 if options.repeat_switch: 484 switch_class = getCPUClass(options.cpu_type)[0] 485 if switch_class.require_caches() and \ 486 not options.caches: 487 print "%s: Must be used with caches" % str(switch_class) 488 sys.exit(1) 489 if not switch_class.support_take_over(): 490 print "%s: CPU switching not supported" % str(switch_class) 491 sys.exit(1) 492 493 repeat_switch_cpus = [switch_class(switched_out=True, \ 494 cpu_id=(i)) for i in xrange(np)] 495 496 for i in xrange(np): 497 repeat_switch_cpus[i].system = testsys 498 repeat_switch_cpus[i].workload = testsys.cpu[i].workload 499 repeat_switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain 500 repeat_switch_cpus[i].isa = testsys.cpu[i].isa 501 502 if options.maxinsts: 503 repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts 504 505 if options.checker: 506 repeat_switch_cpus[i].addCheckerCpu() 507 508 testsys.repeat_switch_cpus = repeat_switch_cpus 509 510 if cpu_class: 511 repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i]) 512 for i in xrange(np)] 513 else: 514 repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i]) 515 for i in xrange(np)] 516 517 if options.standard_switch: 518 switch_cpus = [TimingSimpleCPU(switched_out=True, cpu_id=(i)) 519 for i in xrange(np)] 520 switch_cpus_1 = [DerivO3CPU(switched_out=True, cpu_id=(i)) 521 for i in xrange(np)] 522 523 for i in xrange(np): 524 switch_cpus[i].system = testsys 525 switch_cpus_1[i].system = testsys 526 switch_cpus[i].workload = testsys.cpu[i].workload 527 switch_cpus_1[i].workload = testsys.cpu[i].workload 528 switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain 529 switch_cpus_1[i].clk_domain = testsys.cpu[i].clk_domain 530 switch_cpus[i].isa = testsys.cpu[i].isa 531 switch_cpus_1[i].isa = testsys.cpu[i].isa 532 533 # if restoring, make atomic cpu simulate only a few instructions 534 if options.checkpoint_restore != None: 535 testsys.cpu[i].max_insts_any_thread = 1 536 # Fast forward to specified location if we are not restoring 537 elif options.fast_forward: 538 testsys.cpu[i].max_insts_any_thread = int(options.fast_forward) 539 # Fast forward to a simpoint (warning: time consuming) 540 elif options.simpoint: 541 if testsys.cpu[i].workload[0].simpoint == 0: 542 fatal('simpoint not found') 543 testsys.cpu[i].max_insts_any_thread = \ 544 testsys.cpu[i].workload[0].simpoint 545 # No distance specified, just switch 546 else: 547 testsys.cpu[i].max_insts_any_thread = 1 548 549 # warmup period 550 if options.warmup_insts: 551 switch_cpus[i].max_insts_any_thread = options.warmup_insts 552 553 # simulation period 554 if options.maxinsts: 555 switch_cpus_1[i].max_insts_any_thread = options.maxinsts 556 557 # attach the checker cpu if selected 558 if options.checker: 559 switch_cpus[i].addCheckerCpu() 560 switch_cpus_1[i].addCheckerCpu() 561 562 testsys.switch_cpus = switch_cpus 563 testsys.switch_cpus_1 = switch_cpus_1 564 switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)] 565 switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)] 566 567 # set the checkpoint in the cpu before m5.instantiate is called 568 if options.take_checkpoints != None and \ 569 (options.simpoint or options.at_instruction): 570 offset = int(options.take_checkpoints) 571 # Set an instruction break point 572 if options.simpoint: 573 for i in xrange(np): 574 if testsys.cpu[i].workload[0].simpoint == 0: 575 fatal('no simpoint for testsys.cpu[%d].workload[0]', i) 576 checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset 577 testsys.cpu[i].max_insts_any_thread = checkpoint_inst 578 # used for output below 579 options.take_checkpoints = checkpoint_inst 580 else: 581 options.take_checkpoints = offset 582 # Set all test cpus with the right number of instructions 583 # for the upcoming simulation 584 for i in xrange(np): 585 testsys.cpu[i].max_insts_any_thread = offset 586 587 if options.take_simpoint_checkpoints != None: 588 simpoints, interval_length = parseSimpointAnalysisFile(options, testsys) 589 590 checkpoint_dir = None 591 if options.checkpoint_restore: 592 cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys) 593 m5.instantiate(checkpoint_dir) 594 595 # Initialization is complete. If we're not in control of simulation 596 # (that is, if we're a slave simulator acting as a component in another 597 # 'master' simulator) then we're done here. The other simulator will 598 # call simulate() directly. --initialize-only is used to indicate this. 599 if options.initialize_only: 600 return 601 602 # Handle the max tick settings now that tick frequency was resolved 603 # during system instantiation 604 # NOTE: the maxtick variable here is in absolute ticks, so it must 605 # include any simulated ticks before a checkpoint 606 explicit_maxticks = 0 607 maxtick_from_abs = m5.MaxTick 608 maxtick_from_rel = m5.MaxTick 609 maxtick_from_maxtime = m5.MaxTick 610 if options.abs_max_tick: 611 maxtick_from_abs = options.abs_max_tick 612 explicit_maxticks += 1 613 if options.rel_max_tick: 614 maxtick_from_rel = options.rel_max_tick 615 if options.checkpoint_restore: 616 # NOTE: this may need to be updated if checkpoints ever store 617 # the ticks per simulated second 618 maxtick_from_rel += cpt_starttick 619 if options.at_instruction or options.simpoint: 620 warn("Relative max tick specified with --at-instruction or" \ 621 " --simpoint\n These options don't specify the " \ 622 "checkpoint start tick, so assuming\n you mean " \ 623 "absolute max tick") 624 explicit_maxticks += 1 625 if options.maxtime: 626 maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime) 627 explicit_maxticks += 1 628 if explicit_maxticks > 1: 629 warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\ 630 " Using least") 631 maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime]) 632 633 if options.checkpoint_restore != None and maxtick < cpt_starttick: 634 fatal("Bad maxtick (%d) specified: " \ 635 "Checkpoint starts starts from tick: %d", maxtick, cpt_starttick) 636 637 if options.standard_switch or cpu_class: 638 if options.standard_switch: 639 print "Switch at instruction count:%s" % \ 640 str(testsys.cpu[0].max_insts_any_thread) 641 exit_event = m5.simulate() 642 elif cpu_class and options.fast_forward: 643 print "Switch at instruction count:%s" % \ 644 str(testsys.cpu[0].max_insts_any_thread) 645 exit_event = m5.simulate() 646 else: 647 print "Switch at curTick count:%s" % str(10000) 648 exit_event = m5.simulate(10000) 649 print "Switched CPUS @ tick %s" % (m5.curTick()) 650 651 m5.switchCpus(testsys, switch_cpu_list) 652 653 if options.standard_switch: 654 print "Switch at instruction count:%d" % \ 655 (testsys.switch_cpus[0].max_insts_any_thread) 656 657 #warmup instruction count may have already been set 658 if options.warmup_insts: 659 exit_event = m5.simulate() 660 else: 661 exit_event = m5.simulate(options.standard_switch) 662 print "Switching CPUS @ tick %s" % (m5.curTick()) 663 print "Simulation ends instruction count:%d" % \ 664 (testsys.switch_cpus_1[0].max_insts_any_thread) 665 m5.switchCpus(testsys, switch_cpu_list1) 666 667 # If we're taking and restoring checkpoints, use checkpoint_dir 668 # option only for finding the checkpoints to restore from. This 669 # lets us test checkpointing by restoring from one set of 670 # checkpoints, generating a second set, and then comparing them. 671 if (options.take_checkpoints or options.take_simpoint_checkpoints) \ 672 and options.checkpoint_restore: 673 674 if m5.options.outdir: 675 cptdir = m5.options.outdir 676 else: 677 cptdir = getcwd() 678 679 if options.take_checkpoints != None : 680 # Checkpoints being taken via the command line at <when> and at 681 # subsequent periods of <period>. Checkpoint instructions 682 # received from the benchmark running are ignored and skipped in 683 # favor of command line checkpoint instructions. 684 exit_event = scriptCheckpoints(options, maxtick, cptdir) 685 686 # Take SimPoint checkpoints 687 elif options.take_simpoint_checkpoints != None: 688 takeSimpointCheckpoints(simpoints, interval_length, cptdir) 689 690 # Restore from SimPoint checkpoints 691 elif options.restore_simpoint_checkpoint != None: 692 restoreSimpointCheckpoint() 693 694 else: 695 if options.fast_forward: 696 m5.stats.reset() 697 print "**** REAL SIMULATION ****" 698 699 # If checkpoints are being taken, then the checkpoint instruction 700 # will occur in the benchmark code it self. 701 if options.repeat_switch and maxtick > options.repeat_switch: 702 exit_event = repeatSwitch(testsys, repeat_switch_cpu_list, 703 maxtick, options.repeat_switch) 704 else: 705 exit_event = benchCheckpoints(options, maxtick, cptdir) 706 707 print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause()) 708 if options.checkpoint_at_end: 709 m5.checkpoint(joinpath(cptdir, "cpt.%d")) 710 711 if not m5.options.interactive: 712 sys.exit(exit_event.getCode()) 713