Options.py revision 10159:ca6f1407f8f8
11787Sbinkertn@umich.edu# Copyright (c) 2013 ARM Limited 21787Sbinkertn@umich.edu# All rights reserved. 31787Sbinkertn@umich.edu# 41787Sbinkertn@umich.edu# The license below extends only to copyright in the software and shall 51787Sbinkertn@umich.edu# not be construed as granting a license to any other intellectual 61787Sbinkertn@umich.edu# property including but not limited to intellectual property relating 71787Sbinkertn@umich.edu# to a hardware implementation of the functionality of the software 81787Sbinkertn@umich.edu# licensed hereunder. You may use the software subject to the license 91787Sbinkertn@umich.edu# terms below provided that you ensure that this notice is replicated 101787Sbinkertn@umich.edu# unmodified and in its entirety in all distributions of the software, 111787Sbinkertn@umich.edu# modified or unmodified, in source code or in binary form. 121787Sbinkertn@umich.edu# 131787Sbinkertn@umich.edu# Copyright (c) 2006-2008 The Regents of The University of Michigan 141787Sbinkertn@umich.edu# All rights reserved. 151787Sbinkertn@umich.edu# 161787Sbinkertn@umich.edu# Redistribution and use in source and binary forms, with or without 171787Sbinkertn@umich.edu# modification, are permitted provided that the following conditions are 181787Sbinkertn@umich.edu# met: redistributions of source code must retain the above copyright 191787Sbinkertn@umich.edu# notice, this list of conditions and the following disclaimer; 201787Sbinkertn@umich.edu# redistributions in binary form must reproduce the above copyright 211787Sbinkertn@umich.edu# notice, this list of conditions and the following disclaimer in the 221787Sbinkertn@umich.edu# documentation and/or other materials provided with the distribution; 231787Sbinkertn@umich.edu# neither the name of the copyright holders nor the names of its 241787Sbinkertn@umich.edu# contributors may be used to endorse or promote products derived from 251787Sbinkertn@umich.edu# this software without specific prior written permission. 261787Sbinkertn@umich.edu# 271787Sbinkertn@umich.edu# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 281787Sbinkertn@umich.edu# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 291787Sbinkertn@umich.edu# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 301787Sbinkertn@umich.edu# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 311787Sbinkertn@umich.edu# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 321787Sbinkertn@umich.edu# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 331787Sbinkertn@umich.edu# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 341787Sbinkertn@umich.edu# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 351787Sbinkertn@umich.edu# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 361787Sbinkertn@umich.edu# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 371787Sbinkertn@umich.edu# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 381787Sbinkertn@umich.edu# 391787Sbinkertn@umich.edu# Authors: Lisa Hsu 401787Sbinkertn@umich.edu 411787Sbinkertn@umich.eduimport m5 421787Sbinkertn@umich.edufrom m5.defines import buildEnv 431787Sbinkertn@umich.edufrom m5.objects import * 441787Sbinkertn@umich.edufrom Benchmarks import * 451787Sbinkertn@umich.edu 461787Sbinkertn@umich.eduimport CpuConfig 471787Sbinkertn@umich.eduimport MemConfig 481787Sbinkertn@umich.edu 491878Sbinkertn@umich.edudef _listCpuTypes(option, opt, value, parser): 501787Sbinkertn@umich.edu CpuConfig.print_cpu_list() 511787Sbinkertn@umich.edu sys.exit(0) 521787Sbinkertn@umich.edu 531787Sbinkertn@umich.edudef _listMemTypes(option, opt, value, parser): 541787Sbinkertn@umich.edu MemConfig.print_mem_list() 551787Sbinkertn@umich.edu sys.exit(0) 561787Sbinkertn@umich.edu 571787Sbinkertn@umich.edudef addCommonOptions(parser): 581787Sbinkertn@umich.edu # system options 591787Sbinkertn@umich.edu parser.add_option("--list-cpu-types", 60 action="callback", callback=_listCpuTypes, 61 help="List available CPU types") 62 parser.add_option("--cpu-type", type="choice", default="atomic", 63 choices=CpuConfig.cpu_names(), 64 help = "type of cpu to run with") 65 parser.add_option("--checker", action="store_true"); 66 parser.add_option("-n", "--num-cpus", type="int", default=1) 67 parser.add_option("--sys-voltage", action="store", type="string", 68 default='1.0V', 69 help = """Top-level voltage for blocks running at system 70 power supply""") 71 parser.add_option("--sys-clock", action="store", type="string", 72 default='1GHz', 73 help = """Top-level clock for blocks running at system 74 speed""") 75 parser.add_option("--cpu-clock", action="store", type="string", 76 default='2GHz', 77 help="Clock for blocks running at CPU speed") 78 parser.add_option("--smt", action="store_true", default=False, 79 help = """ 80 Only used if multiple programs are specified. If true, 81 then the number of threads per cpu is same as the 82 number of programs.""") 83 84 # Memory Options 85 parser.add_option("--list-mem-types", 86 action="callback", callback=_listMemTypes, 87 help="List available memory types") 88 parser.add_option("--mem-type", type="choice", default="ddr3_1600_x64", 89 choices=MemConfig.mem_names(), 90 help = "type of memory to use") 91 parser.add_option("--mem-channels", type="int", default=1, 92 help = "number of memory channels") 93 parser.add_option("--mem-size", action="store", type="string", 94 default="512MB", 95 help="Specify the physical memory size (single memory)") 96 97 parser.add_option("-l", "--lpae", action="store_true") 98 parser.add_option("-V", "--virtualisation", action="store_true") 99 100 # Cache Options 101 parser.add_option("--caches", action="store_true") 102 parser.add_option("--l2cache", action="store_true") 103 parser.add_option("--fastmem", action="store_true") 104 parser.add_option("--num-dirs", type="int", default=1) 105 parser.add_option("--num-l2caches", type="int", default=1) 106 parser.add_option("--num-l3caches", type="int", default=1) 107 parser.add_option("--l1d_size", type="string", default="64kB") 108 parser.add_option("--l1i_size", type="string", default="32kB") 109 parser.add_option("--l2_size", type="string", default="2MB") 110 parser.add_option("--l3_size", type="string", default="16MB") 111 parser.add_option("--l1d_assoc", type="int", default=2) 112 parser.add_option("--l1i_assoc", type="int", default=2) 113 parser.add_option("--l2_assoc", type="int", default=8) 114 parser.add_option("--l3_assoc", type="int", default=16) 115 parser.add_option("--cacheline_size", type="int", default=64) 116 117 # Enable Ruby 118 parser.add_option("--ruby", action="store_true") 119 120 # Run duration options 121 parser.add_option("-m", "--abs-max-tick", type="int", default=m5.MaxTick, 122 metavar="TICKS", help="Run to absolute simulated tick " \ 123 "specified including ticks from a restored checkpoint") 124 parser.add_option("--rel-max-tick", type="int", default=None, 125 metavar="TICKS", help="Simulate for specified number of" \ 126 " ticks relative to the simulation start tick (e.g. if " \ 127 "restoring a checkpoint)") 128 parser.add_option("--maxtime", type="float", default=None, 129 help="Run to the specified absolute simulated time in " \ 130 "seconds") 131 parser.add_option("-I", "--maxinsts", action="store", type="int", 132 default=None, help="""Total number of instructions to 133 simulate (default: run forever)""") 134 parser.add_option("--work-item-id", action="store", type="int", 135 help="the specific work id for exit & checkpointing") 136 parser.add_option("--num-work-ids", action="store", type="int", 137 help="Number of distinct work item types") 138 parser.add_option("--work-begin-cpu-id-exit", action="store", type="int", 139 help="exit when work starts on the specified cpu") 140 parser.add_option("--work-end-exit-count", action="store", type="int", 141 help="exit at specified work end count") 142 parser.add_option("--work-begin-exit-count", action="store", type="int", 143 help="exit at specified work begin count") 144 parser.add_option("--init-param", action="store", type="int", default=0, 145 help="""Parameter available in simulation with m5 146 initparam""") 147 148 # Simpoint options 149 parser.add_option("--simpoint-profile", action="store_true", 150 help="Enable basic block profiling for SimPoints") 151 parser.add_option("--simpoint-interval", type="int", default=10000000, 152 help="SimPoint interval in num of instructions") 153 154 # Checkpointing options 155 ###Note that performing checkpointing via python script files will override 156 ###checkpoint instructions built into binaries. 157 parser.add_option("--take-checkpoints", action="store", type="string", 158 help="<M,N> take checkpoints at tick M and every N ticks thereafter") 159 parser.add_option("--max-checkpoints", action="store", type="int", 160 help="the maximum number of checkpoints to drop", default=5) 161 parser.add_option("--checkpoint-dir", action="store", type="string", 162 help="Place all checkpoints in this absolute directory") 163 parser.add_option("-r", "--checkpoint-restore", action="store", type="int", 164 help="restore from checkpoint <N>") 165 parser.add_option("--checkpoint-at-end", action="store_true", 166 help="take a checkpoint at end of run") 167 parser.add_option("--work-begin-checkpoint-count", action="store", type="int", 168 help="checkpoint at specified work begin count") 169 parser.add_option("--work-end-checkpoint-count", action="store", type="int", 170 help="checkpoint at specified work end count") 171 parser.add_option("--work-cpus-checkpoint-count", action="store", type="int", 172 help="checkpoint and exit when active cpu count is reached") 173 parser.add_option("--restore-with-cpu", action="store", type="choice", 174 default="atomic", choices=CpuConfig.cpu_names(), 175 help = "cpu type for restoring from a checkpoint") 176 177 178 # CPU Switching - default switch model goes from a checkpoint 179 # to a timing simple CPU with caches to warm up, then to detailed CPU for 180 # data measurement 181 parser.add_option("--repeat-switch", action="store", type="int", 182 default=None, 183 help="switch back and forth between CPUs with period <N>") 184 parser.add_option("-s", "--standard-switch", action="store", type="int", 185 default=None, 186 help="switch from timing to Detailed CPU after warmup period of <N>") 187 parser.add_option("-p", "--prog-interval", type="str", 188 help="CPU Progress Interval") 189 190 # Fastforwarding and simpoint related materials 191 parser.add_option("-W", "--warmup-insts", action="store", type="int", 192 default=None, 193 help="Warmup period in total instructions (requires --standard-switch)") 194 parser.add_option("--bench", action="store", type="string", default=None, 195 help="base names for --take-checkpoint and --checkpoint-restore") 196 parser.add_option("-F", "--fast-forward", action="store", type="string", 197 default=None, 198 help="Number of instructions to fast forward before switching") 199 parser.add_option("-S", "--simpoint", action="store_true", default=False, 200 help="""Use workload simpoints as an instruction offset for 201 --checkpoint-restore or --take-checkpoint.""") 202 parser.add_option("--at-instruction", action="store_true", default=False, 203 help="""Treat value of --checkpoint-restore or --take-checkpoint as a 204 number of instructions.""") 205 parser.add_option("--spec-input", default="ref", type="choice", 206 choices=["ref", "test", "train", "smred", "mdred", 207 "lgred"], 208 help="Input set size for SPEC CPU2000 benchmarks.") 209 parser.add_option("--arm-iset", default="arm", type="choice", 210 choices=["arm", "thumb", "aarch64"], 211 help="ARM instruction set.") 212 213 214def addSEOptions(parser): 215 # Benchmark options 216 parser.add_option("-c", "--cmd", default="", 217 help="The binary to run in syscall emulation mode.") 218 parser.add_option("-o", "--options", default="", 219 help="""The options to pass to the binary, use " " 220 around the entire string""") 221 parser.add_option("-i", "--input", default="", 222 help="Read stdin from a file.") 223 parser.add_option("--output", default="", 224 help="Redirect stdout to a file.") 225 parser.add_option("--errout", default="", 226 help="Redirect stderr to a file.") 227 228def addFSOptions(parser): 229 # Simulation options 230 parser.add_option("--timesync", action="store_true", 231 help="Prevent simulated time from getting ahead of real time") 232 233 # System options 234 parser.add_option("--kernel", action="store", type="string") 235 parser.add_option("--script", action="store", type="string") 236 parser.add_option("--frame-capture", action="store_true", 237 help="Stores changed frame buffers from the VNC server to compressed "\ 238 "files in the gem5 output directory") 239 240 if buildEnv['TARGET_ISA'] == "arm": 241 parser.add_option("--bare-metal", action="store_true", 242 help="Provide the raw system without the linux specific bits") 243 parser.add_option("--machine-type", action="store", type="choice", 244 choices=ArmMachineType.map.keys(), default="RealView_PBX") 245 parser.add_option("--dtb-filename", action="store", type="string", 246 help="Specifies device tree blob file to use with device-tree-"\ 247 "enabled kernels") 248 parser.add_option("--enable-context-switch-stats-dump", \ 249 action="store_true", help="Enable stats dump at context "\ 250 "switches and dump tasks file (required for Streamline)") 251 252 # Benchmark options 253 parser.add_option("--dual", action="store_true", 254 help="Simulate two systems attached with an ethernet link") 255 parser.add_option("-b", "--benchmark", action="store", type="string", 256 dest="benchmark", 257 help="Specify the benchmark to run. Available benchmarks: %s"\ 258 % DefinedBenchmarks) 259 260 # Metafile options 261 parser.add_option("--etherdump", action="store", type="string", dest="etherdump", 262 help="Specify the filename to dump a pcap capture of the" \ 263 "ethernet traffic") 264 265 # Disk Image Options 266 parser.add_option("--disk-image", action="store", type="string", default=None, 267 help="Path to the disk image to use.") 268