SConstruct revision 9119:a8749b39f1f8
1# -*- mode:python -*- 2 3# Copyright (c) 2011 Advanced Micro Devices, Inc. 4# Copyright (c) 2009 The Hewlett-Packard Development Company 5# Copyright (c) 2004-2005 The Regents of The University of Michigan 6# All rights reserved. 7# 8# Redistribution and use in source and binary forms, with or without 9# modification, are permitted provided that the following conditions are 10# met: redistributions of source code must retain the above copyright 11# notice, this list of conditions and the following disclaimer; 12# redistributions in binary form must reproduce the above copyright 13# notice, this list of conditions and the following disclaimer in the 14# documentation and/or other materials provided with the distribution; 15# neither the name of the copyright holders nor the names of its 16# contributors may be used to endorse or promote products derived from 17# this software without specific prior written permission. 18# 19# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 22# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 23# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 24# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 25# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 29# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30# 31# Authors: Steve Reinhardt 32# Nathan Binkert 33 34################################################### 35# 36# SCons top-level build description (SConstruct) file. 37# 38# While in this directory ('gem5'), just type 'scons' to build the default 39# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 40# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 41# the optimized full-system version). 42# 43# You can build gem5 in a different directory as long as there is a 44# 'build/<CONFIG>' somewhere along the target path. The build system 45# expects that all configs under the same build directory are being 46# built for the same host system. 47# 48# Examples: 49# 50# The following two commands are equivalent. The '-u' option tells 51# scons to search up the directory tree for this SConstruct file. 52# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 53# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 54# 55# The following two commands are equivalent and demonstrate building 56# in a directory outside of the source tree. The '-C' option tells 57# scons to chdir to the specified directory to find this SConstruct 58# file. 59# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 60# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 61# 62# You can use 'scons -H' to print scons options. If you're in this 63# 'gem5' directory (or use -u or -C to tell scons where to find this 64# file), you can use 'scons -h' to print all the gem5-specific build 65# options as well. 66# 67################################################### 68 69# Check for recent-enough Python and SCons versions. 70try: 71 # Really old versions of scons only take two options for the 72 # function, so check once without the revision and once with the 73 # revision, the first instance will fail for stuff other than 74 # 0.98, and the second will fail for 0.98.0 75 EnsureSConsVersion(0, 98) 76 EnsureSConsVersion(0, 98, 1) 77except SystemExit, e: 78 print """ 79For more details, see: 80 http://gem5.org/Dependencies 81""" 82 raise 83 84# We ensure the python version early because we have stuff that 85# requires python 2.4 86try: 87 EnsurePythonVersion(2, 4) 88except SystemExit, e: 89 print """ 90You can use a non-default installation of the Python interpreter by 91either (1) rearranging your PATH so that scons finds the non-default 92'python' first or (2) explicitly invoking an alternative interpreter 93on the scons script. 94 95For more details, see: 96 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 97""" 98 raise 99 100# Global Python includes 101import os 102import re 103import subprocess 104import sys 105 106from os import mkdir, environ 107from os.path import abspath, basename, dirname, expanduser, normpath 108from os.path import exists, isdir, isfile 109from os.path import join as joinpath, split as splitpath 110 111# SCons includes 112import SCons 113import SCons.Node 114 115extra_python_paths = [ 116 Dir('src/python').srcnode().abspath, # gem5 includes 117 Dir('ext/ply').srcnode().abspath, # ply is used by several files 118 ] 119 120sys.path[1:1] = extra_python_paths 121 122from m5.util import compareVersions, readCommand 123from m5.util.terminal import get_termcap 124 125help_texts = { 126 "options" : "", 127 "global_vars" : "", 128 "local_vars" : "" 129} 130 131Export("help_texts") 132 133 134# There's a bug in scons in that (1) by default, the help texts from 135# AddOption() are supposed to be displayed when you type 'scons -h' 136# and (2) you can override the help displayed by 'scons -h' using the 137# Help() function, but these two features are incompatible: once 138# you've overridden the help text using Help(), there's no way to get 139# at the help texts from AddOptions. See: 140# http://scons.tigris.org/issues/show_bug.cgi?id=2356 141# http://scons.tigris.org/issues/show_bug.cgi?id=2611 142# This hack lets us extract the help text from AddOptions and 143# re-inject it via Help(). Ideally someday this bug will be fixed and 144# we can just use AddOption directly. 145def AddLocalOption(*args, **kwargs): 146 col_width = 30 147 148 help = " " + ", ".join(args) 149 if "help" in kwargs: 150 length = len(help) 151 if length >= col_width: 152 help += "\n" + " " * col_width 153 else: 154 help += " " * (col_width - length) 155 help += kwargs["help"] 156 help_texts["options"] += help + "\n" 157 158 AddOption(*args, **kwargs) 159 160AddLocalOption('--colors', dest='use_colors', action='store_true', 161 help="Add color to abbreviated scons output") 162AddLocalOption('--no-colors', dest='use_colors', action='store_false', 163 help="Don't add color to abbreviated scons output") 164AddLocalOption('--default', dest='default', type='string', action='store', 165 help='Override which build_opts file to use for defaults') 166AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 167 help='Disable style checking hooks') 168AddLocalOption('--update-ref', dest='update_ref', action='store_true', 169 help='Update test reference outputs') 170AddLocalOption('--verbose', dest='verbose', action='store_true', 171 help='Print full tool command lines') 172 173termcap = get_termcap(GetOption('use_colors')) 174 175######################################################################## 176# 177# Set up the main build environment. 178# 179######################################################################## 180use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 181 'LIBRARY_PATH', 'PATH', 'PYTHONPATH', 'RANLIB', 'SWIG' ]) 182 183use_env = {} 184for key,val in os.environ.iteritems(): 185 if key in use_vars or key.startswith("M5"): 186 use_env[key] = val 187 188main = Environment(ENV=use_env) 189main.Decider('MD5-timestamp') 190main.root = Dir(".") # The current directory (where this file lives). 191main.srcdir = Dir("src") # The source directory 192 193# add useful python code PYTHONPATH so it can be used by subprocesses 194# as well 195main.AppendENVPath('PYTHONPATH', extra_python_paths) 196 197######################################################################## 198# 199# Mercurial Stuff. 200# 201# If the gem5 directory is a mercurial repository, we should do some 202# extra things. 203# 204######################################################################## 205 206hgdir = main.root.Dir(".hg") 207 208mercurial_style_message = """ 209You're missing the gem5 style hook, which automatically checks your code 210against the gem5 style rules on hg commit and qrefresh commands. This 211script will now install the hook in your .hg/hgrc file. 212Press enter to continue, or ctrl-c to abort: """ 213 214mercurial_style_hook = """ 215# The following lines were automatically added by gem5/SConstruct 216# to provide the gem5 style-checking hooks 217[extensions] 218style = %s/util/style.py 219 220[hooks] 221pretxncommit.style = python:style.check_style 222pre-qrefresh.style = python:style.check_style 223# End of SConstruct additions 224 225""" % (main.root.abspath) 226 227mercurial_lib_not_found = """ 228Mercurial libraries cannot be found, ignoring style hook. If 229you are a gem5 developer, please fix this and run the style 230hook. It is important. 231""" 232 233# Check for style hook and prompt for installation if it's not there. 234# Skip this if --ignore-style was specified, there's no .hg dir to 235# install a hook in, or there's no interactive terminal to prompt. 236if not GetOption('ignore_style') and hgdir.exists() and sys.stdin.isatty(): 237 style_hook = True 238 try: 239 from mercurial import ui 240 ui = ui.ui() 241 ui.readconfig(hgdir.File('hgrc').abspath) 242 style_hook = ui.config('hooks', 'pretxncommit.style', None) and \ 243 ui.config('hooks', 'pre-qrefresh.style', None) 244 except ImportError: 245 print mercurial_lib_not_found 246 247 if not style_hook: 248 print mercurial_style_message, 249 # continue unless user does ctrl-c/ctrl-d etc. 250 try: 251 raw_input() 252 except: 253 print "Input exception, exiting scons.\n" 254 sys.exit(1) 255 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 256 print "Adding style hook to", hgrc_path, "\n" 257 try: 258 hgrc = open(hgrc_path, 'a') 259 hgrc.write(mercurial_style_hook) 260 hgrc.close() 261 except: 262 print "Error updating", hgrc_path 263 sys.exit(1) 264 265 266################################################### 267# 268# Figure out which configurations to set up based on the path(s) of 269# the target(s). 270# 271################################################### 272 273# Find default configuration & binary. 274Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 275 276# helper function: find last occurrence of element in list 277def rfind(l, elt, offs = -1): 278 for i in range(len(l)+offs, 0, -1): 279 if l[i] == elt: 280 return i 281 raise ValueError, "element not found" 282 283# Take a list of paths (or SCons Nodes) and return a list with all 284# paths made absolute and ~-expanded. Paths will be interpreted 285# relative to the launch directory unless a different root is provided 286def makePathListAbsolute(path_list, root=GetLaunchDir()): 287 return [abspath(joinpath(root, expanduser(str(p)))) 288 for p in path_list] 289 290# Each target must have 'build' in the interior of the path; the 291# directory below this will determine the build parameters. For 292# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 293# recognize that ALPHA_SE specifies the configuration because it 294# follow 'build' in the build path. 295 296# The funky assignment to "[:]" is needed to replace the list contents 297# in place rather than reassign the symbol to a new list, which 298# doesn't work (obviously!). 299BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 300 301# Generate a list of the unique build roots and configs that the 302# collected targets reference. 303variant_paths = [] 304build_root = None 305for t in BUILD_TARGETS: 306 path_dirs = t.split('/') 307 try: 308 build_top = rfind(path_dirs, 'build', -2) 309 except: 310 print "Error: no non-leaf 'build' dir found on target path", t 311 Exit(1) 312 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 313 if not build_root: 314 build_root = this_build_root 315 else: 316 if this_build_root != build_root: 317 print "Error: build targets not under same build root\n"\ 318 " %s\n %s" % (build_root, this_build_root) 319 Exit(1) 320 variant_path = joinpath('/',*path_dirs[:build_top+2]) 321 if variant_path not in variant_paths: 322 variant_paths.append(variant_path) 323 324# Make sure build_root exists (might not if this is the first build there) 325if not isdir(build_root): 326 mkdir(build_root) 327main['BUILDROOT'] = build_root 328 329Export('main') 330 331main.SConsignFile(joinpath(build_root, "sconsign")) 332 333# Default duplicate option is to use hard links, but this messes up 334# when you use emacs to edit a file in the target dir, as emacs moves 335# file to file~ then copies to file, breaking the link. Symbolic 336# (soft) links work better. 337main.SetOption('duplicate', 'soft-copy') 338 339# 340# Set up global sticky variables... these are common to an entire build 341# tree (not specific to a particular build like ALPHA_SE) 342# 343 344global_vars_file = joinpath(build_root, 'variables.global') 345 346global_vars = Variables(global_vars_file, args=ARGUMENTS) 347 348global_vars.AddVariables( 349 ('CC', 'C compiler', environ.get('CC', main['CC'])), 350 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 351 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 352 ('BATCH', 'Use batch pool for build and tests', False), 353 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 354 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 355 ('EXTRAS', 'Add extra directories to the compilation', '') 356 ) 357 358# Update main environment with values from ARGUMENTS & global_vars_file 359global_vars.Update(main) 360help_texts["global_vars"] += global_vars.GenerateHelpText(main) 361 362# Save sticky variable settings back to current variables file 363global_vars.Save(global_vars_file, main) 364 365# Parse EXTRAS variable to build list of all directories where we're 366# look for sources etc. This list is exported as extras_dir_list. 367base_dir = main.srcdir.abspath 368if main['EXTRAS']: 369 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 370else: 371 extras_dir_list = [] 372 373Export('base_dir') 374Export('extras_dir_list') 375 376# the ext directory should be on the #includes path 377main.Append(CPPPATH=[Dir('ext')]) 378 379def strip_build_path(path, env): 380 path = str(path) 381 variant_base = env['BUILDROOT'] + os.path.sep 382 if path.startswith(variant_base): 383 path = path[len(variant_base):] 384 elif path.startswith('build/'): 385 path = path[6:] 386 return path 387 388# Generate a string of the form: 389# common/path/prefix/src1, src2 -> tgt1, tgt2 390# to print while building. 391class Transform(object): 392 # all specific color settings should be here and nowhere else 393 tool_color = termcap.Normal 394 pfx_color = termcap.Yellow 395 srcs_color = termcap.Yellow + termcap.Bold 396 arrow_color = termcap.Blue + termcap.Bold 397 tgts_color = termcap.Yellow + termcap.Bold 398 399 def __init__(self, tool, max_sources=99): 400 self.format = self.tool_color + (" [%8s] " % tool) \ 401 + self.pfx_color + "%s" \ 402 + self.srcs_color + "%s" \ 403 + self.arrow_color + " -> " \ 404 + self.tgts_color + "%s" \ 405 + termcap.Normal 406 self.max_sources = max_sources 407 408 def __call__(self, target, source, env, for_signature=None): 409 # truncate source list according to max_sources param 410 source = source[0:self.max_sources] 411 def strip(f): 412 return strip_build_path(str(f), env) 413 if len(source) > 0: 414 srcs = map(strip, source) 415 else: 416 srcs = [''] 417 tgts = map(strip, target) 418 # surprisingly, os.path.commonprefix is a dumb char-by-char string 419 # operation that has nothing to do with paths. 420 com_pfx = os.path.commonprefix(srcs + tgts) 421 com_pfx_len = len(com_pfx) 422 if com_pfx: 423 # do some cleanup and sanity checking on common prefix 424 if com_pfx[-1] == ".": 425 # prefix matches all but file extension: ok 426 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 427 com_pfx = com_pfx[0:-1] 428 elif com_pfx[-1] == "/": 429 # common prefix is directory path: OK 430 pass 431 else: 432 src0_len = len(srcs[0]) 433 tgt0_len = len(tgts[0]) 434 if src0_len == com_pfx_len: 435 # source is a substring of target, OK 436 pass 437 elif tgt0_len == com_pfx_len: 438 # target is a substring of source, need to back up to 439 # avoid empty string on RHS of arrow 440 sep_idx = com_pfx.rfind(".") 441 if sep_idx != -1: 442 com_pfx = com_pfx[0:sep_idx] 443 else: 444 com_pfx = '' 445 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 446 # still splitting at file extension: ok 447 pass 448 else: 449 # probably a fluke; ignore it 450 com_pfx = '' 451 # recalculate length in case com_pfx was modified 452 com_pfx_len = len(com_pfx) 453 def fmt(files): 454 f = map(lambda s: s[com_pfx_len:], files) 455 return ', '.join(f) 456 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 457 458Export('Transform') 459 460# enable the regression script to use the termcap 461main['TERMCAP'] = termcap 462 463if GetOption('verbose'): 464 def MakeAction(action, string, *args, **kwargs): 465 return Action(action, *args, **kwargs) 466else: 467 MakeAction = Action 468 main['CCCOMSTR'] = Transform("CC") 469 main['CXXCOMSTR'] = Transform("CXX") 470 main['ASCOMSTR'] = Transform("AS") 471 main['SWIGCOMSTR'] = Transform("SWIG") 472 main['ARCOMSTR'] = Transform("AR", 0) 473 main['LINKCOMSTR'] = Transform("LINK", 0) 474 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 475 main['M4COMSTR'] = Transform("M4") 476 main['SHCCCOMSTR'] = Transform("SHCC") 477 main['SHCXXCOMSTR'] = Transform("SHCXX") 478Export('MakeAction') 479 480CXX_version = readCommand([main['CXX'],'--version'], exception=False) 481CXX_V = readCommand([main['CXX'],'-V'], exception=False) 482 483main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 484main['SUNCC'] = CXX_V and CXX_V.find('Sun C++') >= 0 485main['ICC'] = CXX_V and CXX_V.find('Intel') >= 0 486main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 487if main['GCC'] + main['SUNCC'] + main['ICC'] + main['CLANG'] > 1: 488 print 'Error: How can we have two at the same time?' 489 Exit(1) 490 491# Set up default C++ compiler flags 492if main['GCC']: 493 main.Append(CCFLAGS=['-pipe']) 494 main.Append(CCFLAGS=['-fno-strict-aliasing']) 495 main.Append(CCFLAGS=['-Wall', '-Wno-sign-compare', '-Wundef']) 496 # Read the GCC version to check for versions with bugs 497 # Note CCVERSION doesn't work here because it is run with the CC 498 # before we override it from the command line 499 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 500 main['GCC_VERSION'] = gcc_version 501 if not compareVersions(gcc_version, '4.4.1') or \ 502 not compareVersions(gcc_version, '4.4.2'): 503 print 'Info: Tree vectorizer in GCC 4.4.1 & 4.4.2 is buggy, disabling.' 504 main.Append(CCFLAGS=['-fno-tree-vectorize']) 505 if compareVersions(gcc_version, '4.6') >= 0: 506 main.Append(CXXFLAGS=['-std=c++0x']) 507elif main['ICC']: 508 pass #Fix me... add warning flags once we clean up icc warnings 509elif main['SUNCC']: 510 main.Append(CCFLAGS=['-Qoption ccfe']) 511 main.Append(CCFLAGS=['-features=gcc']) 512 main.Append(CCFLAGS=['-features=extensions']) 513 main.Append(CCFLAGS=['-library=stlport4']) 514 main.Append(CCFLAGS=['-xar']) 515 #main.Append(CCFLAGS=['-instances=semiexplicit']) 516elif main['CLANG']: 517 clang_version_re = re.compile(".* version (\d+\.\d+)") 518 clang_version_match = clang_version_re.match(CXX_version) 519 if (clang_version_match): 520 clang_version = clang_version_match.groups()[0] 521 if compareVersions(clang_version, "2.9") < 0: 522 print 'Error: clang version 2.9 or newer required.' 523 print ' Installed version:', clang_version 524 Exit(1) 525 else: 526 print 'Error: Unable to determine clang version.' 527 Exit(1) 528 529 main.Append(CCFLAGS=['-pipe']) 530 main.Append(CCFLAGS=['-fno-strict-aliasing']) 531 main.Append(CCFLAGS=['-Wall', '-Wno-sign-compare', '-Wundef']) 532 main.Append(CCFLAGS=['-Wno-tautological-compare']) 533 main.Append(CCFLAGS=['-Wno-self-assign']) 534 # Ruby makes frequent use of extraneous parantheses in the printing 535 # of if-statements 536 main.Append(CCFLAGS=['-Wno-parentheses']) 537 538 if compareVersions(clang_version, "3") >= 0: 539 main.Append(CXXFLAGS=['-std=c++0x']) 540else: 541 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 542 print "Don't know what compiler options to use for your compiler." 543 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 544 print termcap.Yellow + ' version:' + termcap.Normal, 545 if not CXX_version: 546 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 547 termcap.Normal 548 else: 549 print CXX_version.replace('\n', '<nl>') 550 print " If you're trying to use a compiler other than GCC, ICC, SunCC," 551 print " or clang, there appears to be something wrong with your" 552 print " environment." 553 print " " 554 print " If you are trying to use a compiler other than those listed" 555 print " above you will need to ease fix SConstruct and " 556 print " src/SConscript to support that compiler." 557 Exit(1) 558 559# Set up common yacc/bison flags (needed for Ruby) 560main['YACCFLAGS'] = '-d' 561main['YACCHXXFILESUFFIX'] = '.hh' 562 563# Do this after we save setting back, or else we'll tack on an 564# extra 'qdo' every time we run scons. 565if main['BATCH']: 566 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 567 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 568 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 569 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 570 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 571 572if sys.platform == 'cygwin': 573 # cygwin has some header file issues... 574 main.Append(CCFLAGS=["-Wno-uninitialized"]) 575 576# Check for SWIG 577if not main.has_key('SWIG'): 578 print 'Error: SWIG utility not found.' 579 print ' Please install (see http://www.swig.org) and retry.' 580 Exit(1) 581 582# Check for appropriate SWIG version 583swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 584# First 3 words should be "SWIG Version x.y.z" 585if len(swig_version) < 3 or \ 586 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 587 print 'Error determining SWIG version.' 588 Exit(1) 589 590min_swig_version = '1.3.34' 591if compareVersions(swig_version[2], min_swig_version) < 0: 592 print 'Error: SWIG version', min_swig_version, 'or newer required.' 593 print ' Installed version:', swig_version[2] 594 Exit(1) 595 596# Set up SWIG flags & scanner 597swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 598main.Append(SWIGFLAGS=swig_flags) 599 600# filter out all existing swig scanners, they mess up the dependency 601# stuff for some reason 602scanners = [] 603for scanner in main['SCANNERS']: 604 skeys = scanner.skeys 605 if skeys == '.i': 606 continue 607 608 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 609 continue 610 611 scanners.append(scanner) 612 613# add the new swig scanner that we like better 614from SCons.Scanner import ClassicCPP as CPPScanner 615swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 616scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 617 618# replace the scanners list that has what we want 619main['SCANNERS'] = scanners 620 621# Add a custom Check function to the Configure context so that we can 622# figure out if the compiler adds leading underscores to global 623# variables. This is needed for the autogenerated asm files that we 624# use for embedding the python code. 625def CheckLeading(context): 626 context.Message("Checking for leading underscore in global variables...") 627 # 1) Define a global variable called x from asm so the C compiler 628 # won't change the symbol at all. 629 # 2) Declare that variable. 630 # 3) Use the variable 631 # 632 # If the compiler prepends an underscore, this will successfully 633 # link because the external symbol 'x' will be called '_x' which 634 # was defined by the asm statement. If the compiler does not 635 # prepend an underscore, this will not successfully link because 636 # '_x' will have been defined by assembly, while the C portion of 637 # the code will be trying to use 'x' 638 ret = context.TryLink(''' 639 asm(".globl _x; _x: .byte 0"); 640 extern int x; 641 int main() { return x; } 642 ''', extension=".c") 643 context.env.Append(LEADING_UNDERSCORE=ret) 644 context.Result(ret) 645 return ret 646 647# Platform-specific configuration. Note again that we assume that all 648# builds under a given build root run on the same host platform. 649conf = Configure(main, 650 conf_dir = joinpath(build_root, '.scons_config'), 651 log_file = joinpath(build_root, 'scons_config.log'), 652 custom_tests = { 'CheckLeading' : CheckLeading }) 653 654# Check for leading underscores. Don't really need to worry either 655# way so don't need to check the return code. 656conf.CheckLeading() 657 658# Check if we should compile a 64 bit binary on Mac OS X/Darwin 659try: 660 import platform 661 uname = platform.uname() 662 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 663 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 664 main.Append(CCFLAGS=['-arch', 'x86_64']) 665 main.Append(CFLAGS=['-arch', 'x86_64']) 666 main.Append(LINKFLAGS=['-arch', 'x86_64']) 667 main.Append(ASFLAGS=['-arch', 'x86_64']) 668except: 669 pass 670 671# Recent versions of scons substitute a "Null" object for Configure() 672# when configuration isn't necessary, e.g., if the "--help" option is 673# present. Unfortuantely this Null object always returns false, 674# breaking all our configuration checks. We replace it with our own 675# more optimistic null object that returns True instead. 676if not conf: 677 def NullCheck(*args, **kwargs): 678 return True 679 680 class NullConf: 681 def __init__(self, env): 682 self.env = env 683 def Finish(self): 684 return self.env 685 def __getattr__(self, mname): 686 return NullCheck 687 688 conf = NullConf(main) 689 690# Find Python include and library directories for embedding the 691# interpreter. For consistency, we will use the same Python 692# installation used to run scons (and thus this script). If you want 693# to link in an alternate version, see above for instructions on how 694# to invoke scons with a different copy of the Python interpreter. 695from distutils import sysconfig 696 697py_getvar = sysconfig.get_config_var 698 699py_debug = getattr(sys, 'pydebug', False) 700py_version = 'python' + py_getvar('VERSION') + (py_debug and "_d" or "") 701 702py_general_include = sysconfig.get_python_inc() 703py_platform_include = sysconfig.get_python_inc(plat_specific=True) 704py_includes = [ py_general_include ] 705if py_platform_include != py_general_include: 706 py_includes.append(py_platform_include) 707 708py_lib_path = [ py_getvar('LIBDIR') ] 709# add the prefix/lib/pythonX.Y/config dir, but only if there is no 710# shared library in prefix/lib/. 711if not py_getvar('Py_ENABLE_SHARED'): 712 py_lib_path.append(py_getvar('LIBPL')) 713 714py_libs = [] 715for lib in py_getvar('LIBS').split() + py_getvar('SYSLIBS').split(): 716 if not lib.startswith('-l'): 717 # Python requires some special flags to link (e.g. -framework 718 # common on OS X systems), assume appending preserves order 719 main.Append(LINKFLAGS=[lib]) 720 else: 721 lib = lib[2:] 722 if lib not in py_libs: 723 py_libs.append(lib) 724py_libs.append(py_version) 725 726main.Append(CPPPATH=py_includes) 727main.Append(LIBPATH=py_lib_path) 728 729# Cache build files in the supplied directory. 730if main['M5_BUILD_CACHE']: 731 print 'Using build cache located at', main['M5_BUILD_CACHE'] 732 CacheDir(main['M5_BUILD_CACHE']) 733 734 735# verify that this stuff works 736if not conf.CheckHeader('Python.h', '<>'): 737 print "Error: can't find Python.h header in", py_includes 738 Exit(1) 739 740for lib in py_libs: 741 if not conf.CheckLib(lib): 742 print "Error: can't find library %s required by python" % lib 743 Exit(1) 744 745# On Solaris you need to use libsocket for socket ops 746if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 747 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 748 print "Can't find library with socket calls (e.g. accept())" 749 Exit(1) 750 751# Check for zlib. If the check passes, libz will be automatically 752# added to the LIBS environment variable. 753if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 754 print 'Error: did not find needed zlib compression library '\ 755 'and/or zlib.h header file.' 756 print ' Please install zlib and try again.' 757 Exit(1) 758 759# Check for librt. 760have_posix_clock = \ 761 conf.CheckLibWithHeader(None, 'time.h', 'C', 762 'clock_nanosleep(0,0,NULL,NULL);') or \ 763 conf.CheckLibWithHeader('rt', 'time.h', 'C', 764 'clock_nanosleep(0,0,NULL,NULL);') 765 766if conf.CheckLib('tcmalloc_minimal'): 767 have_tcmalloc = True 768else: 769 have_tcmalloc = False 770 print termcap.Yellow + termcap.Bold + \ 771 "You can get a 12% performance improvement by installing tcmalloc "\ 772 "(libgoogle-perftools-dev package on Ubuntu or RedHat)." + \ 773 termcap.Normal 774 775if not have_posix_clock: 776 print "Can't find library for POSIX clocks." 777 778# Check for <fenv.h> (C99 FP environment control) 779have_fenv = conf.CheckHeader('fenv.h', '<>') 780if not have_fenv: 781 print "Warning: Header file <fenv.h> not found." 782 print " This host has no IEEE FP rounding mode control." 783 784###################################################################### 785# 786# Finish the configuration 787# 788main = conf.Finish() 789 790###################################################################### 791# 792# Collect all non-global variables 793# 794 795# Define the universe of supported ISAs 796all_isa_list = [ ] 797Export('all_isa_list') 798 799class CpuModel(object): 800 '''The CpuModel class encapsulates everything the ISA parser needs to 801 know about a particular CPU model.''' 802 803 # Dict of available CPU model objects. Accessible as CpuModel.dict. 804 dict = {} 805 list = [] 806 defaults = [] 807 808 # Constructor. Automatically adds models to CpuModel.dict. 809 def __init__(self, name, filename, includes, strings, default=False): 810 self.name = name # name of model 811 self.filename = filename # filename for output exec code 812 self.includes = includes # include files needed in exec file 813 # The 'strings' dict holds all the per-CPU symbols we can 814 # substitute into templates etc. 815 self.strings = strings 816 817 # This cpu is enabled by default 818 self.default = default 819 820 # Add self to dict 821 if name in CpuModel.dict: 822 raise AttributeError, "CpuModel '%s' already registered" % name 823 CpuModel.dict[name] = self 824 CpuModel.list.append(name) 825 826Export('CpuModel') 827 828# Sticky variables get saved in the variables file so they persist from 829# one invocation to the next (unless overridden, in which case the new 830# value becomes sticky). 831sticky_vars = Variables(args=ARGUMENTS) 832Export('sticky_vars') 833 834# Sticky variables that should be exported 835export_vars = [] 836Export('export_vars') 837 838# Walk the tree and execute all SConsopts scripts that wil add to the 839# above variables 840if not GetOption('verbose'): 841 print "Reading SConsopts" 842for bdir in [ base_dir ] + extras_dir_list: 843 if not isdir(bdir): 844 print "Error: directory '%s' does not exist" % bdir 845 Exit(1) 846 for root, dirs, files in os.walk(bdir): 847 if 'SConsopts' in files: 848 if GetOption('verbose'): 849 print "Reading", joinpath(root, 'SConsopts') 850 SConscript(joinpath(root, 'SConsopts')) 851 852all_isa_list.sort() 853 854sticky_vars.AddVariables( 855 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 856 ListVariable('CPU_MODELS', 'CPU models', 857 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 858 sorted(CpuModel.list)), 859 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 860 False), 861 BoolVariable('SS_COMPATIBLE_FP', 862 'Make floating-point results compatible with SimpleScalar', 863 False), 864 BoolVariable('USE_SSE2', 865 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 866 False), 867 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 868 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 869 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 870 ) 871 872# These variables get exported to #defines in config/*.hh (see src/SConscript). 873export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 874 'TARGET_ISA', 'CP_ANNOTATE', 'USE_POSIX_CLOCK' ] 875 876################################################### 877# 878# Define a SCons builder for configuration flag headers. 879# 880################################################### 881 882# This function generates a config header file that #defines the 883# variable symbol to the current variable setting (0 or 1). The source 884# operands are the name of the variable and a Value node containing the 885# value of the variable. 886def build_config_file(target, source, env): 887 (variable, value) = [s.get_contents() for s in source] 888 f = file(str(target[0]), 'w') 889 print >> f, '#define', variable, value 890 f.close() 891 return None 892 893# Combine the two functions into a scons Action object. 894config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 895 896# The emitter munges the source & target node lists to reflect what 897# we're really doing. 898def config_emitter(target, source, env): 899 # extract variable name from Builder arg 900 variable = str(target[0]) 901 # True target is config header file 902 target = joinpath('config', variable.lower() + '.hh') 903 val = env[variable] 904 if isinstance(val, bool): 905 # Force value to 0/1 906 val = int(val) 907 elif isinstance(val, str): 908 val = '"' + val + '"' 909 910 # Sources are variable name & value (packaged in SCons Value nodes) 911 return ([target], [Value(variable), Value(val)]) 912 913config_builder = Builder(emitter = config_emitter, action = config_action) 914 915main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 916 917# libelf build is shared across all configs in the build root. 918main.SConscript('ext/libelf/SConscript', 919 variant_dir = joinpath(build_root, 'libelf')) 920 921# gzstream build is shared across all configs in the build root. 922main.SConscript('ext/gzstream/SConscript', 923 variant_dir = joinpath(build_root, 'gzstream')) 924 925################################################### 926# 927# This function is used to set up a directory with switching headers 928# 929################################################### 930 931main['ALL_ISA_LIST'] = all_isa_list 932def make_switching_dir(dname, switch_headers, env): 933 # Generate the header. target[0] is the full path of the output 934 # header to generate. 'source' is a dummy variable, since we get the 935 # list of ISAs from env['ALL_ISA_LIST']. 936 def gen_switch_hdr(target, source, env): 937 fname = str(target[0]) 938 f = open(fname, 'w') 939 isa = env['TARGET_ISA'].lower() 940 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 941 f.close() 942 943 # Build SCons Action object. 'varlist' specifies env vars that this 944 # action depends on; when env['ALL_ISA_LIST'] changes these actions 945 # should get re-executed. 946 switch_hdr_action = MakeAction(gen_switch_hdr, 947 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 948 949 # Instantiate actions for each header 950 for hdr in switch_headers: 951 env.Command(hdr, [], switch_hdr_action) 952Export('make_switching_dir') 953 954################################################### 955# 956# Define build environments for selected configurations. 957# 958################################################### 959 960for variant_path in variant_paths: 961 print "Building in", variant_path 962 963 # Make a copy of the build-root environment to use for this config. 964 env = main.Clone() 965 env['BUILDDIR'] = variant_path 966 967 # variant_dir is the tail component of build path, and is used to 968 # determine the build parameters (e.g., 'ALPHA_SE') 969 (build_root, variant_dir) = splitpath(variant_path) 970 971 # Set env variables according to the build directory config. 972 sticky_vars.files = [] 973 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 974 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 975 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 976 current_vars_file = joinpath(build_root, 'variables', variant_dir) 977 if isfile(current_vars_file): 978 sticky_vars.files.append(current_vars_file) 979 print "Using saved variables file %s" % current_vars_file 980 else: 981 # Build dir-specific variables file doesn't exist. 982 983 # Make sure the directory is there so we can create it later 984 opt_dir = dirname(current_vars_file) 985 if not isdir(opt_dir): 986 mkdir(opt_dir) 987 988 # Get default build variables from source tree. Variables are 989 # normally determined by name of $VARIANT_DIR, but can be 990 # overridden by '--default=' arg on command line. 991 default = GetOption('default') 992 opts_dir = joinpath(main.root.abspath, 'build_opts') 993 if default: 994 default_vars_files = [joinpath(build_root, 'variables', default), 995 joinpath(opts_dir, default)] 996 else: 997 default_vars_files = [joinpath(opts_dir, variant_dir)] 998 existing_files = filter(isfile, default_vars_files) 999 if existing_files: 1000 default_vars_file = existing_files[0] 1001 sticky_vars.files.append(default_vars_file) 1002 print "Variables file %s not found,\n using defaults in %s" \ 1003 % (current_vars_file, default_vars_file) 1004 else: 1005 print "Error: cannot find variables file %s or " \ 1006 "default file(s) %s" \ 1007 % (current_vars_file, ' or '.join(default_vars_files)) 1008 Exit(1) 1009 1010 # Apply current variable settings to env 1011 sticky_vars.Update(env) 1012 1013 help_texts["local_vars"] += \ 1014 "Build variables for %s:\n" % variant_dir \ 1015 + sticky_vars.GenerateHelpText(env) 1016 1017 # Process variable settings. 1018 1019 if not have_fenv and env['USE_FENV']: 1020 print "Warning: <fenv.h> not available; " \ 1021 "forcing USE_FENV to False in", variant_dir + "." 1022 env['USE_FENV'] = False 1023 1024 if not env['USE_FENV']: 1025 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1026 print " FP results may deviate slightly from other platforms." 1027 1028 if env['EFENCE']: 1029 env.Append(LIBS=['efence']) 1030 1031 # Save sticky variable settings back to current variables file 1032 sticky_vars.Save(current_vars_file, env) 1033 1034 if env['USE_SSE2']: 1035 env.Append(CCFLAGS=['-msse2']) 1036 1037 if have_tcmalloc: 1038 env.Append(LIBS=['tcmalloc_minimal']) 1039 1040 # The src/SConscript file sets up the build rules in 'env' according 1041 # to the configured variables. It returns a list of environments, 1042 # one for each variant build (debug, opt, etc.) 1043 envList = SConscript('src/SConscript', variant_dir = variant_path, 1044 exports = 'env') 1045 1046 # Set up the regression tests for each build. 1047 for e in envList: 1048 SConscript('tests/SConscript', 1049 variant_dir = joinpath(variant_path, 'tests', e.Label), 1050 exports = { 'env' : e }, duplicate = False) 1051 1052# base help text 1053Help(''' 1054Usage: scons [scons options] [build variables] [target(s)] 1055 1056Extra scons options: 1057%(options)s 1058 1059Global build variables: 1060%(global_vars)s 1061 1062%(local_vars)s 1063''' % help_texts) 1064