SConstruct revision 2665
1# -*- mode:python -*-
2
3# Copyright (c) 2004-2005 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29# Authors: Steve Reinhardt
30
31###################################################
32#
33# SCons top-level build description (SConstruct) file.
34#
35# While in this directory ('m5'), just type 'scons' to build the default
36# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
37# to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for
38# the optimized full-system version).
39#
40# You can build M5 in a different directory as long as there is a
41# 'build/<CONFIG>' somewhere along the target path.  The build system
42# expdects that all configs under the same build directory are being
43# built for the same host system.
44#
45# Examples:
46#   These two commands are equivalent.  The '-u' option tells scons to
47#   search up the directory tree for this SConstruct file.
48#   % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug
49#   % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug
50#   These two commands are equivalent and demonstrate building in a
51#   directory outside of the source tree.  The '-C' option tells scons
52#   to chdir to the specified directory to find this SConstruct file.
53#   % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug
54#   % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug
55#
56# You can use 'scons -H' to print scons options.  If you're in this
57# 'm5' directory (or use -u or -C to tell scons where to find this
58# file), you can use 'scons -h' to print all the M5-specific build
59# options as well.
60#
61###################################################
62
63# Python library imports
64import sys
65import os
66
67# Check for recent-enough Python and SCons versions.  If your system's
68# default installation of Python is not recent enough, you can use a
69# non-default installation of the Python interpreter by either (1)
70# rearranging your PATH so that scons finds the non-default 'python'
71# first or (2) explicitly invoking an alternative interpreter on the
72# scons script, e.g., "/usr/local/bin/python2.4 `which scons` [args]".
73EnsurePythonVersion(2,4)
74
75# Ironically, SCons 0.96 dies if you give EnsureSconsVersion a
76# 3-element version number.
77min_scons_version = (0,96,91)
78try:
79    EnsureSConsVersion(*min_scons_version)
80except:
81    print "Error checking current SCons version."
82    print "SCons", ".".join(map(str,min_scons_version)), "or greater required."
83    Exit(2)
84    
85
86# The absolute path to the current directory (where this file lives).
87ROOT = Dir('.').abspath
88
89# Paths to the M5 and external source trees.
90SRCDIR = os.path.join(ROOT, 'src')
91
92# tell python where to find m5 python code
93sys.path.append(os.path.join(ROOT, 'src/python'))
94
95###################################################
96#
97# Figure out which configurations to set up based on the path(s) of
98# the target(s).
99#
100###################################################
101
102# Find default configuration & binary.
103Default(os.environ.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug'))
104
105# Ask SCons which directory it was invoked from.
106launch_dir = GetLaunchDir()
107
108# Make targets relative to invocation directory
109abs_targets = map(lambda x: os.path.normpath(os.path.join(launch_dir, str(x))),
110                  BUILD_TARGETS)
111
112# helper function: find last occurrence of element in list
113def rfind(l, elt, offs = -1):
114    for i in range(len(l)+offs, 0, -1):
115        if l[i] == elt:
116            return i
117    raise ValueError, "element not found"
118
119# Each target must have 'build' in the interior of the path; the
120# directory below this will determine the build parameters.  For
121# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
122# recognize that ALPHA_SE specifies the configuration because it
123# follow 'build' in the bulid path.
124
125# Generate a list of the unique build roots and configs that the
126# collected targets reference.
127build_paths = []
128build_root = None
129for t in abs_targets:
130    path_dirs = t.split('/')
131    try:
132        build_top = rfind(path_dirs, 'build', -2)
133    except:
134        print "Error: no non-leaf 'build' dir found on target path", t
135        Exit(1)
136    this_build_root = os.path.join('/',*path_dirs[:build_top+1])
137    if not build_root:
138        build_root = this_build_root
139    else:
140        if this_build_root != build_root:
141            print "Error: build targets not under same build root\n"\
142                  "  %s\n  %s" % (build_root, this_build_root)
143            Exit(1)
144    build_path = os.path.join('/',*path_dirs[:build_top+2])
145    if build_path not in build_paths:
146        build_paths.append(build_path)
147
148###################################################
149#
150# Set up the default build environment.  This environment is copied
151# and modified according to each selected configuration.
152#
153###################################################
154
155env = Environment(ENV = os.environ,  # inherit user's environment vars
156                  ROOT = ROOT,
157                  SRCDIR = SRCDIR)
158
159env.SConsignFile("sconsign")
160
161# I waffle on this setting... it does avoid a few painful but
162# unnecessary builds, but it also seems to make trivial builds take
163# noticeably longer.
164if False:
165    env.TargetSignatures('content')
166
167# M5_PLY is used by isa_parser.py to find the PLY package.
168env.Append(ENV = { 'M5_PLY' : Dir('ext/ply') })
169
170# Set up default C++ compiler flags
171env.Append(CCFLAGS='-pipe')
172env.Append(CCFLAGS='-fno-strict-aliasing')
173env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
174if sys.platform == 'cygwin':
175    # cygwin has some header file issues...
176    env.Append(CCFLAGS=Split("-Wno-uninitialized"))
177env.Append(CPPPATH=[Dir('ext/dnet')])
178
179# Find Python include and library directories for embedding the
180# interpreter.  For consistency, we will use the same Python
181# installation used to run scons (and thus this script).  If you want
182# to link in an alternate version, see above for instructions on how
183# to invoke scons with a different copy of the Python interpreter.
184
185# Get brief Python version name (e.g., "python2.4") for locating
186# include & library files
187py_version_name = 'python' + sys.version[:3]
188
189# include path, e.g. /usr/local/include/python2.4
190env.Append(CPPPATH = os.path.join(sys.exec_prefix, 'include', py_version_name))
191env.Append(LIBS = py_version_name)
192# add library path too if it's not in the default place
193if sys.exec_prefix != '/usr':
194    env.Append(LIBPATH = os.path.join(sys.exec_prefix, 'lib'))
195
196# Other default libraries
197env.Append(LIBS=['z'])
198
199# Platform-specific configuration.  Note again that we assume that all
200# builds under a given build root run on the same host platform.
201conf = Configure(env,
202                 conf_dir = os.path.join(build_root, '.scons_config'),
203                 log_file = os.path.join(build_root, 'scons_config.log'))
204
205# Check for <fenv.h> (C99 FP environment control)
206have_fenv = conf.CheckHeader('fenv.h', '<>')
207if not have_fenv:
208    print "Warning: Header file <fenv.h> not found."
209    print "         This host has no IEEE FP rounding mode control."
210
211# Check for mysql.
212mysql_config = WhereIs('mysql_config')
213have_mysql = mysql_config != None
214
215# Check MySQL version.
216if have_mysql:
217    mysql_version = os.popen(mysql_config + ' --version').read()
218    mysql_version = mysql_version.split('.')
219    mysql_major = int(mysql_version[0])
220    mysql_minor = int(mysql_version[1])
221    # This version check is probably overly conservative, but it deals
222    # with the versions we have installed.
223    if mysql_major < 4 or (mysql_major == 4 and mysql_minor < 1):
224        print "Warning: MySQL v4.1 or newer required."
225        have_mysql = False
226
227# Set up mysql_config commands.
228if have_mysql:
229    mysql_config_include = mysql_config + ' --include'
230    if os.system(mysql_config_include + ' > /dev/null') != 0:
231        # older mysql_config versions don't support --include, use
232        # --cflags instead
233        mysql_config_include = mysql_config + ' --cflags | sed s/\\\'//g'
234    # This seems to work in all versions
235    mysql_config_libs = mysql_config + ' --libs'
236
237env = conf.Finish()
238
239# Define the universe of supported ISAs
240env['ALL_ISA_LIST'] = ['alpha', 'sparc', 'mips']
241
242# Define the universe of supported CPU models
243env['ALL_CPU_LIST'] = ['AtomicSimpleCPU', 'TimingSimpleCPU',
244                       'FullCPU', 'AlphaFullCPU']
245
246# Sticky options get saved in the options file so they persist from
247# one invocation to the next (unless overridden, in which case the new
248# value becomes sticky).
249sticky_opts = Options(args=ARGUMENTS)
250sticky_opts.AddOptions(
251    EnumOption('TARGET_ISA', 'Target ISA', 'alpha', env['ALL_ISA_LIST']),
252    BoolOption('FULL_SYSTEM', 'Full-system support', False),
253    # There's a bug in scons 0.96.1 that causes ListOptions with list
254    # values (more than one value) not to be able to be restored from
255    # a saved option file.  If this causes trouble then upgrade to
256    # scons 0.96.90 or later.
257    ListOption('CPU_MODELS', 'CPU models', 'AtomicSimpleCPU,TimingSimpleCPU',
258               env['ALL_CPU_LIST']),
259    BoolOption('ALPHA_TLASER',
260               'Model Alpha TurboLaser platform (vs. Tsunami)', False),
261    BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False),
262    BoolOption('EFENCE', 'Link with Electric Fence malloc debugger',
263               False),
264    BoolOption('SS_COMPATIBLE_FP',
265               'Make floating-point results compatible with SimpleScalar',
266               False),
267    BoolOption('USE_SSE2',
268               'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
269               False),
270    BoolOption('STATS_BINNING', 'Bin statistics by CPU mode', have_mysql),
271    BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql),
272    BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
273    ('CC', 'C compiler', os.environ.get('CC', env['CC'])),
274    ('CXX', 'C++ compiler', os.environ.get('CXX', env['CXX'])),
275    BoolOption('BATCH', 'Use batch pool for build and tests', False),
276    ('BATCH_CMD', 'Batch pool submission command name', 'qdo')
277    )
278
279# Non-sticky options only apply to the current build.
280nonsticky_opts = Options(args=ARGUMENTS)
281nonsticky_opts.AddOptions(
282    BoolOption('update_ref', 'Update test reference outputs', False)
283    )
284
285# These options get exported to #defines in config/*.hh (see m5/SConscript).
286env.ExportOptions = ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \
287                     'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \
288                     'STATS_BINNING']
289
290# Define a handy 'no-op' action
291def no_action(target, source, env):
292    return 0
293
294env.NoAction = Action(no_action, None)
295
296###################################################
297#
298# Define a SCons builder for configuration flag headers.
299#
300###################################################
301
302# This function generates a config header file that #defines the
303# option symbol to the current option setting (0 or 1).  The source
304# operands are the name of the option and a Value node containing the
305# value of the option.
306def build_config_file(target, source, env):
307    (option, value) = [s.get_contents() for s in source]
308    f = file(str(target[0]), 'w')
309    print >> f, '#define', option, value
310    f.close()
311    return None
312
313# Generate the message to be printed when building the config file.
314def build_config_file_string(target, source, env):
315    (option, value) = [s.get_contents() for s in source]
316    return "Defining %s as %s in %s." % (option, value, target[0])
317
318# Combine the two functions into a scons Action object.
319config_action = Action(build_config_file, build_config_file_string)
320
321# The emitter munges the source & target node lists to reflect what
322# we're really doing.
323def config_emitter(target, source, env):
324    # extract option name from Builder arg
325    option = str(target[0])
326    # True target is config header file
327    target = os.path.join('config', option.lower() + '.hh')
328    # Force value to 0/1 even if it's a Python bool
329    val = int(eval(str(env[option])))
330    # Sources are option name & value (packaged in SCons Value nodes)
331    return ([target], [Value(option), Value(val)])
332
333config_builder = Builder(emitter = config_emitter, action = config_action)
334
335env.Append(BUILDERS = { 'ConfigFile' : config_builder })
336
337###################################################
338#
339# Define a SCons builder for copying files.  This is used by the
340# Python zipfile code in src/python/SConscript, but is placed up here
341# since it's potentially more generally applicable.
342#
343###################################################
344
345copy_builder = Builder(action = Copy("$TARGET", "$SOURCE"))
346
347env.Append(BUILDERS = { 'CopyFile' : copy_builder })
348
349###################################################
350#
351# Define a simple SCons builder to concatenate files.
352#
353# Used to append the Python zip archive to the executable.
354#
355###################################################
356
357concat_builder = Builder(action = Action(['cat $SOURCES > $TARGET',
358                                          'chmod +x $TARGET']))
359
360env.Append(BUILDERS = { 'Concat' : concat_builder })
361
362
363# base help text
364help_text = '''
365Usage: scons [scons options] [build options] [target(s)]
366
367'''
368
369# libelf build is shared across all configs in the build root.
370env.SConscript('ext/libelf/SConscript',
371               build_dir = os.path.join(build_root, 'libelf'),
372               exports = 'env')
373
374###################################################
375#
376# Define build environments for selected configurations.
377#
378###################################################
379
380# rename base env
381base_env = env
382
383for build_path in build_paths:
384    print "Building in", build_path
385    # build_dir is the tail component of build path, and is used to
386    # determine the build parameters (e.g., 'ALPHA_SE')
387    (build_root, build_dir) = os.path.split(build_path)
388    # Make a copy of the build-root environment to use for this config.
389    env = base_env.Copy()
390
391    # Set env options according to the build directory config.
392    sticky_opts.files = []
393    # Options for $BUILD_ROOT/$BUILD_DIR are stored in
394    # $BUILD_ROOT/options/$BUILD_DIR so you can nuke
395    # $BUILD_ROOT/$BUILD_DIR without losing your options settings.
396    current_opts_file = os.path.join(build_root, 'options', build_dir)
397    if os.path.isfile(current_opts_file):
398        sticky_opts.files.append(current_opts_file)
399        print "Using saved options file %s" % current_opts_file
400    else:
401        # Build dir-specific options file doesn't exist.
402
403        # Make sure the directory is there so we can create it later
404        opt_dir = os.path.dirname(current_opts_file)
405        if not os.path.isdir(opt_dir):
406            os.mkdir(opt_dir)
407
408        # Get default build options from source tree.  Options are
409        # normally determined by name of $BUILD_DIR, but can be
410        # overriden by 'default=' arg on command line.
411        default_opts_file = os.path.join('build_opts',
412                                         ARGUMENTS.get('default', build_dir))
413        if os.path.isfile(default_opts_file):
414            sticky_opts.files.append(default_opts_file)
415            print "Options file %s not found,\n  using defaults in %s" \
416                  % (current_opts_file, default_opts_file)
417        else:
418            print "Error: cannot find options file %s or %s" \
419                  % (current_opts_file, default_opts_file)
420            Exit(1)
421
422    # Apply current option settings to env
423    sticky_opts.Update(env)
424    nonsticky_opts.Update(env)
425
426    help_text += "Sticky options for %s:\n" % build_dir \
427                 + sticky_opts.GenerateHelpText(env) \
428                 + "\nNon-sticky options for %s:\n" % build_dir \
429                 + nonsticky_opts.GenerateHelpText(env)
430
431    # Process option settings.
432
433    if not have_fenv and env['USE_FENV']:
434        print "Warning: <fenv.h> not available; " \
435              "forcing USE_FENV to False in", build_dir + "."
436        env['USE_FENV'] = False
437
438    if not env['USE_FENV']:
439        print "Warning: No IEEE FP rounding mode control in", build_dir + "."
440        print "         FP results may deviate slightly from other platforms."
441
442    if env['EFENCE']:
443        env.Append(LIBS=['efence'])
444
445    if env['USE_MYSQL']:
446        if not have_mysql:
447            print "Warning: MySQL not available; " \
448                  "forcing USE_MYSQL to False in", build_dir + "."
449            env['USE_MYSQL'] = False
450        else:
451            print "Compiling in", build_dir, "with MySQL support."
452            env.ParseConfig(mysql_config_libs)
453            env.ParseConfig(mysql_config_include)
454
455    # Save sticky option settings back to current options file
456    sticky_opts.Save(current_opts_file, env)
457
458    # Do this after we save setting back, or else we'll tack on an
459    # extra 'qdo' every time we run scons.
460    if env['BATCH']:
461        env['CC']  = env['BATCH_CMD'] + ' ' + env['CC']
462        env['CXX'] = env['BATCH_CMD'] + ' ' + env['CXX']
463
464    if env['USE_SSE2']:
465        env.Append(CCFLAGS='-msse2')
466
467    # The m5/SConscript file sets up the build rules in 'env' according
468    # to the configured options.  It returns a list of environments,
469    # one for each variant build (debug, opt, etc.)
470    envList = SConscript('src/SConscript', build_dir = build_path,
471                         exports = 'env', duplicate = False)
472
473    # Set up the regression tests for each build.
474#    for e in envList:
475#        SConscript('m5-test/SConscript',
476#                   build_dir = os.path.join(build_dir, 'test', e.Label),
477#                   exports = { 'env' : e }, duplicate = False)
478
479Help(help_text)
480
481###################################################
482#
483# Let SCons do its thing.  At this point SCons will use the defined
484# build environments to build the requested targets.
485#
486###################################################
487
488