SConstruct revision 2635:47ee03367e30
1# -*- mode:python -*- 2 3# Copyright (c) 2004-2005 The Regents of The University of Michigan 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions are 8# met: redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer; 10# redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution; 13# neither the name of the copyright holders nor the names of its 14# contributors may be used to endorse or promote products derived from 15# this software without specific prior written permission. 16# 17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 29################################################### 30# 31# SCons top-level build description (SConstruct) file. 32# 33# While in this directory ('m5'), just type 'scons' to build the default 34# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 35# to build some other configuration (e.g., 'build/ALPHA_FS/m5.opt' for 36# the optimized full-system version). 37# 38# You can build M5 in a different directory as long as there is a 39# 'build/<CONFIG>' somewhere along the target path. The build system 40# expdects that all configs under the same build directory are being 41# built for the same host system. 42# 43# Examples: 44# These two commands are equivalent. The '-u' option tells scons to 45# search up the directory tree for this SConstruct file. 46# % cd <path-to-src>/m5 ; scons build/ALPHA_FS/m5.debug 47# % cd <path-to-src>/m5/build/ALPHA_FS; scons -u m5.debug 48# These two commands are equivalent and demonstrate building in a 49# directory outside of the source tree. The '-C' option tells scons 50# to chdir to the specified directory to find this SConstruct file. 51# % cd <path-to-src>/m5 ; scons /local/foo/build/ALPHA_FS/m5.debug 52# % cd /local/foo/build/ALPHA_FS; scons -C <path-to-src>/m5 m5.debug 53# 54# You can use 'scons -H' to print scons options. If you're in this 55# 'm5' directory (or use -u or -C to tell scons where to find this 56# file), you can use 'scons -h' to print all the M5-specific build 57# options as well. 58# 59################################################### 60 61# Python library imports 62import sys 63import os 64 65# Check for recent-enough Python and SCons versions 66EnsurePythonVersion(2,3) 67EnsureSConsVersion(0,96,91) 68 69# The absolute path to the current directory (where this file lives). 70ROOT = Dir('.').abspath 71 72# Paths to the M5 and external source trees. 73SRCDIR = os.path.join(ROOT, 'src') 74 75# tell python where to find m5 python code 76sys.path.append(os.path.join(ROOT, 'src/python')) 77 78################################################### 79# 80# Figure out which configurations to set up based on the path(s) of 81# the target(s). 82# 83################################################### 84 85# Find default configuration & binary. 86Default(os.environ.get('M5_DEFAULT_BINARY', 'build/ALPHA_SE/m5.debug')) 87 88# Ask SCons which directory it was invoked from. 89launch_dir = GetLaunchDir() 90 91# Make targets relative to invocation directory 92abs_targets = map(lambda x: os.path.normpath(os.path.join(launch_dir, str(x))), 93 BUILD_TARGETS) 94 95# helper function: find last occurrence of element in list 96def rfind(l, elt, offs = -1): 97 for i in range(len(l)+offs, 0, -1): 98 if l[i] == elt: 99 return i 100 raise ValueError, "element not found" 101 102# Each target must have 'build' in the interior of the path; the 103# directory below this will determine the build parameters. For 104# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 105# recognize that ALPHA_SE specifies the configuration because it 106# follow 'build' in the bulid path. 107 108# Generate a list of the unique build roots and configs that the 109# collected targets reference. 110build_paths = [] 111build_roots = [] 112for t in abs_targets: 113 path_dirs = t.split('/') 114 try: 115 build_top = rfind(path_dirs, 'build', -2) 116 except: 117 print "Error: no non-leaf 'build' dir found on target path", t 118 Exit(1) 119 build_root = os.path.join('/',*path_dirs[:build_top+1]) 120 if build_root not in build_roots: 121 build_roots.append(build_root) 122 build_path = os.path.join('/',*path_dirs[:build_top+2]) 123 if build_path not in build_paths: 124 build_paths.append(build_path) 125 126################################################### 127# 128# Set up the default build environment. This environment is copied 129# and modified according to each selected configuration. 130# 131################################################### 132 133env = Environment(ENV = os.environ, # inherit user's environment vars 134 ROOT = ROOT, 135 SRCDIR = SRCDIR) 136 137env.SConsignFile("sconsign") 138 139# I waffle on this setting... it does avoid a few painful but 140# unnecessary builds, but it also seems to make trivial builds take 141# noticeably longer. 142if False: 143 env.TargetSignatures('content') 144 145# M5_PLY is used by isa_parser.py to find the PLY package. 146env.Append(ENV = { 'M5_PLY' : Dir('ext/ply') }) 147 148# Set up default C++ compiler flags 149env.Append(CCFLAGS='-pipe') 150env.Append(CCFLAGS='-fno-strict-aliasing') 151env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef')) 152if sys.platform == 'cygwin': 153 # cygwin has some header file issues... 154 env.Append(CCFLAGS=Split("-Wno-uninitialized")) 155env.Append(CPPPATH=[Dir('ext/dnet')]) 156 157# Default libraries 158env.Append(LIBS=['z']) 159 160# Platform-specific configuration 161conf = Configure(env) 162 163# Check for <fenv.h> (C99 FP environment control) 164have_fenv = conf.CheckHeader('fenv.h', '<>') 165if not have_fenv: 166 print "Warning: Header file <fenv.h> not found." 167 print " This host has no IEEE FP rounding mode control." 168 169# Check for mysql. 170mysql_config = WhereIs('mysql_config') 171have_mysql = mysql_config != None 172 173# Check MySQL version. 174if have_mysql: 175 mysql_version = os.popen(mysql_config + ' --version').read() 176 mysql_version = mysql_version.split('.') 177 mysql_major = int(mysql_version[0]) 178 mysql_minor = int(mysql_version[1]) 179 # This version check is probably overly conservative, but it deals 180 # with the versions we have installed. 181 if mysql_major < 4 or (mysql_major == 4 and mysql_minor < 1): 182 print "Warning: MySQL v4.1 or newer required." 183 have_mysql = False 184 185# Set up mysql_config commands. 186if have_mysql: 187 mysql_config_include = mysql_config + ' --include' 188 if os.system(mysql_config_include + ' > /dev/null') != 0: 189 # older mysql_config versions don't support --include, use 190 # --cflags instead 191 mysql_config_include = mysql_config + ' --cflags | sed s/\\\'//g' 192 # This seems to work in all versions 193 mysql_config_libs = mysql_config + ' --libs' 194 195env = conf.Finish() 196 197# Define the universe of supported ISAs 198env['ALL_ISA_LIST'] = ['alpha', 'sparc', 'mips'] 199 200# Define the universe of supported CPU models 201env['ALL_CPU_LIST'] = ['AtomicSimpleCPU', 'TimingSimpleCPU', 202 'FastCPU', 'FullCPU', 'AlphaFullCPU'] 203 204# Sticky options get saved in the options file so they persist from 205# one invocation to the next (unless overridden, in which case the new 206# value becomes sticky). 207sticky_opts = Options(args=ARGUMENTS) 208sticky_opts.AddOptions( 209 EnumOption('TARGET_ISA', 'Target ISA', 'alpha', env['ALL_ISA_LIST']), 210 BoolOption('FULL_SYSTEM', 'Full-system support', False), 211 # There's a bug in scons 0.96.1 that causes ListOptions with list 212 # values (more than one value) not to be able to be restored from 213 # a saved option file. If this causes trouble then upgrade to 214 # scons 0.96.90 or later. 215 ListOption('CPU_MODELS', 'CPU models', 'AtomicSimpleCPU,TimingSimpleCPU', 216 env['ALL_CPU_LIST']), 217 BoolOption('ALPHA_TLASER', 218 'Model Alpha TurboLaser platform (vs. Tsunami)', False), 219 BoolOption('NO_FAST_ALLOC', 'Disable fast object allocator', False), 220 BoolOption('EFENCE', 'Link with Electric Fence malloc debugger', 221 False), 222 BoolOption('SS_COMPATIBLE_FP', 223 'Make floating-point results compatible with SimpleScalar', 224 False), 225 BoolOption('USE_SSE2', 226 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 227 False), 228 BoolOption('STATS_BINNING', 'Bin statistics by CPU mode', have_mysql), 229 BoolOption('USE_MYSQL', 'Use MySQL for stats output', have_mysql), 230 BoolOption('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 231 ('CC', 'C compiler', os.environ.get('CC', env['CC'])), 232 ('CXX', 'C++ compiler', os.environ.get('CXX', env['CXX'])), 233 BoolOption('BATCH', 'Use batch pool for build and tests', False), 234 ('BATCH_CMD', 'Batch pool submission command name', 'qdo') 235 ) 236 237# Non-sticky options only apply to the current build. 238nonsticky_opts = Options(args=ARGUMENTS) 239nonsticky_opts.AddOptions( 240 BoolOption('update_ref', 'Update test reference outputs', False) 241 ) 242 243# These options get exported to #defines in config/*.hh (see m5/SConscript). 244env.ExportOptions = ['FULL_SYSTEM', 'ALPHA_TLASER', 'USE_FENV', \ 245 'USE_MYSQL', 'NO_FAST_ALLOC', 'SS_COMPATIBLE_FP', \ 246 'STATS_BINNING'] 247 248# Define a handy 'no-op' action 249def no_action(target, source, env): 250 return 0 251 252env.NoAction = Action(no_action, None) 253 254################################################### 255# 256# Define a SCons builder for configuration flag headers. 257# 258################################################### 259 260# This function generates a config header file that #defines the 261# option symbol to the current option setting (0 or 1). The source 262# operands are the name of the option and a Value node containing the 263# value of the option. 264def build_config_file(target, source, env): 265 (option, value) = [s.get_contents() for s in source] 266 f = file(str(target[0]), 'w') 267 print >> f, '#define', option, value 268 f.close() 269 return None 270 271# Generate the message to be printed when building the config file. 272def build_config_file_string(target, source, env): 273 (option, value) = [s.get_contents() for s in source] 274 return "Defining %s as %s in %s." % (option, value, target[0]) 275 276# Combine the two functions into a scons Action object. 277config_action = Action(build_config_file, build_config_file_string) 278 279# The emitter munges the source & target node lists to reflect what 280# we're really doing. 281def config_emitter(target, source, env): 282 # extract option name from Builder arg 283 option = str(target[0]) 284 # True target is config header file 285 target = os.path.join('config', option.lower() + '.hh') 286 # Force value to 0/1 even if it's a Python bool 287 val = int(eval(str(env[option]))) 288 # Sources are option name & value (packaged in SCons Value nodes) 289 return ([target], [Value(option), Value(val)]) 290 291config_builder = Builder(emitter = config_emitter, action = config_action) 292 293env.Append(BUILDERS = { 'ConfigFile' : config_builder }) 294 295# base help text 296help_text = ''' 297Usage: scons [scons options] [build options] [target(s)] 298 299''' 300 301################################################### 302# 303# Define build environments for selected configurations. 304# 305################################################### 306 307# rename base env 308base_env = env 309 310# Spme things (just libelf currently) are shared across all configs in 311# a "build root". Need to define how to build these just once for 312# each referenced root. 313build_root_env = {} 314for build_root in build_roots: 315 env = base_env.Copy() 316 env.SConscript('ext/libelf/SConscript', 317 build_dir = os.path.join(build_root, 'libelf'), 318 exports = 'env') 319 build_root_env[build_root] = env 320 321for build_path in build_paths: 322 print "Building in", build_path 323 # build_dir is the tail component of build path, and is used to 324 # determine the build parameters (e.g., 'ALPHA_SE') 325 (build_root, build_dir) = os.path.split(build_path) 326 # Make a copy of the build-root environment to use for this config. 327 env = build_root_env[build_root].Copy() 328 329 # Set env options according to the build directory config. 330 sticky_opts.files = [] 331 # Options for $BUILD_ROOT/$BUILD_DIR are stored in 332 # $BUILD_ROOT/options/$BUILD_DIR so you can nuke 333 # $BUILD_ROOT/$BUILD_DIR without losing your options settings. 334 current_opts_file = os.path.join(build_root, 'options', build_dir) 335 if os.path.isfile(current_opts_file): 336 sticky_opts.files.append(current_opts_file) 337 print "Using saved options file %s" % current_opts_file 338 else: 339 # Build dir-specific options file doesn't exist. 340 341 # Make sure the directory is there so we can create it later 342 opt_dir = os.path.dirname(current_opts_file) 343 if not os.path.isdir(opt_dir): 344 os.mkdir(opt_dir) 345 346 # Get default build options from source tree. Options are 347 # normally determined by name of $BUILD_DIR, but can be 348 # overriden by 'default=' arg on command line. 349 default_opts_file = os.path.join('build_opts', 350 ARGUMENTS.get('default', build_dir)) 351 if os.path.isfile(default_opts_file): 352 sticky_opts.files.append(default_opts_file) 353 print "Options file %s not found,\n using defaults in %s" \ 354 % (current_opts_file, default_opts_file) 355 else: 356 print "Error: cannot find options file %s or %s" \ 357 % (current_opts_file, default_opts_file) 358 Exit(1) 359 360 # Apply current option settings to env 361 sticky_opts.Update(env) 362 nonsticky_opts.Update(env) 363 364 help_text += "Sticky options for %s:\n" % build_dir \ 365 + sticky_opts.GenerateHelpText(env) \ 366 + "\nNon-sticky options for %s:\n" % build_dir \ 367 + nonsticky_opts.GenerateHelpText(env) 368 369 # Process option settings. 370 371 if not have_fenv and env['USE_FENV']: 372 print "Warning: <fenv.h> not available; " \ 373 "forcing USE_FENV to False in", build_dir + "." 374 env['USE_FENV'] = False 375 376 if not env['USE_FENV']: 377 print "Warning: No IEEE FP rounding mode control in", build_dir + "." 378 print " FP results may deviate slightly from other platforms." 379 380 if env['EFENCE']: 381 env.Append(LIBS=['efence']) 382 383 if env['USE_MYSQL']: 384 if not have_mysql: 385 print "Warning: MySQL not available; " \ 386 "forcing USE_MYSQL to False in", build_dir + "." 387 env['USE_MYSQL'] = False 388 else: 389 print "Compiling in", build_dir, "with MySQL support." 390 env.ParseConfig(mysql_config_libs) 391 env.ParseConfig(mysql_config_include) 392 393 # Save sticky option settings back to current options file 394 sticky_opts.Save(current_opts_file, env) 395 396 # Do this after we save setting back, or else we'll tack on an 397 # extra 'qdo' every time we run scons. 398 if env['BATCH']: 399 env['CC'] = env['BATCH_CMD'] + ' ' + env['CC'] 400 env['CXX'] = env['BATCH_CMD'] + ' ' + env['CXX'] 401 402 if env['USE_SSE2']: 403 env.Append(CCFLAGS='-msse2') 404 405 # The m5/SConscript file sets up the build rules in 'env' according 406 # to the configured options. It returns a list of environments, 407 # one for each variant build (debug, opt, etc.) 408 envList = SConscript('src/SConscript', build_dir = build_path, 409 exports = 'env', duplicate = False) 410 411 # Set up the regression tests for each build. 412# for e in envList: 413# SConscript('m5-test/SConscript', 414# build_dir = os.path.join(build_dir, 'test', e.Label), 415# exports = { 'env' : e }, duplicate = False) 416 417Help(help_text) 418 419################################################### 420# 421# Let SCons do its thing. At this point SCons will use the defined 422# build environments to build the requested targets. 423# 424################################################### 425 426