SConstruct revision 11982:a17ad156c01e
110259SAndrew.Bardsley@arm.com# -*- mode:python -*- 210259SAndrew.Bardsley@arm.com 310259SAndrew.Bardsley@arm.com# Copyright (c) 2013, 2015, 2016 ARM Limited 410259SAndrew.Bardsley@arm.com# All rights reserved. 510259SAndrew.Bardsley@arm.com# 610259SAndrew.Bardsley@arm.com# The license below extends only to copyright in the software and shall 710259SAndrew.Bardsley@arm.com# not be construed as granting a license to any other intellectual 810259SAndrew.Bardsley@arm.com# property including but not limited to intellectual property relating 910259SAndrew.Bardsley@arm.com# to a hardware implementation of the functionality of the software 1010259SAndrew.Bardsley@arm.com# licensed hereunder. You may use the software subject to the license 1110259SAndrew.Bardsley@arm.com# terms below provided that you ensure that this notice is replicated 1210259SAndrew.Bardsley@arm.com# unmodified and in its entirety in all distributions of the software, 1310259SAndrew.Bardsley@arm.com# modified or unmodified, in source code or in binary form. 1410259SAndrew.Bardsley@arm.com# 1510259SAndrew.Bardsley@arm.com# Copyright (c) 2011 Advanced Micro Devices, Inc. 1610259SAndrew.Bardsley@arm.com# Copyright (c) 2009 The Hewlett-Packard Development Company 1710259SAndrew.Bardsley@arm.com# Copyright (c) 2004-2005 The Regents of The University of Michigan 1810259SAndrew.Bardsley@arm.com# All rights reserved. 1910259SAndrew.Bardsley@arm.com# 2010259SAndrew.Bardsley@arm.com# Redistribution and use in source and binary forms, with or without 2110259SAndrew.Bardsley@arm.com# modification, are permitted provided that the following conditions are 2210259SAndrew.Bardsley@arm.com# met: redistributions of source code must retain the above copyright 2310259SAndrew.Bardsley@arm.com# notice, this list of conditions and the following disclaimer; 2410259SAndrew.Bardsley@arm.com# redistributions in binary form must reproduce the above copyright 2510259SAndrew.Bardsley@arm.com# notice, this list of conditions and the following disclaimer in the 2610259SAndrew.Bardsley@arm.com# documentation and/or other materials provided with the distribution; 2710259SAndrew.Bardsley@arm.com# neither the name of the copyright holders nor the names of its 2810259SAndrew.Bardsley@arm.com# contributors may be used to endorse or promote products derived from 2910259SAndrew.Bardsley@arm.com# this software without specific prior written permission. 3010259SAndrew.Bardsley@arm.com# 3110259SAndrew.Bardsley@arm.com# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 3210259SAndrew.Bardsley@arm.com# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 3310259SAndrew.Bardsley@arm.com# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 3410259SAndrew.Bardsley@arm.com# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 3510259SAndrew.Bardsley@arm.com# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 3610259SAndrew.Bardsley@arm.com# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 3710259SAndrew.Bardsley@arm.com# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 3810259SAndrew.Bardsley@arm.com# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 3910259SAndrew.Bardsley@arm.com# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 4010259SAndrew.Bardsley@arm.com# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 4110259SAndrew.Bardsley@arm.com# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 4210259SAndrew.Bardsley@arm.com# 4310259SAndrew.Bardsley@arm.com# Authors: Steve Reinhardt 4410259SAndrew.Bardsley@arm.com# Nathan Binkert 4510259SAndrew.Bardsley@arm.com 4610259SAndrew.Bardsley@arm.com################################################### 4710259SAndrew.Bardsley@arm.com# 4810259SAndrew.Bardsley@arm.com# SCons top-level build description (SConstruct) file. 4910259SAndrew.Bardsley@arm.com# 5010259SAndrew.Bardsley@arm.com# While in this directory ('gem5'), just type 'scons' to build the default 5110259SAndrew.Bardsley@arm.com# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 5210259SAndrew.Bardsley@arm.com# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 5310259SAndrew.Bardsley@arm.com# the optimized full-system version). 5410259SAndrew.Bardsley@arm.com# 5510259SAndrew.Bardsley@arm.com# You can build gem5 in a different directory as long as there is a 5610259SAndrew.Bardsley@arm.com# 'build/<CONFIG>' somewhere along the target path. The build system 5710259SAndrew.Bardsley@arm.com# expects that all configs under the same build directory are being 5810259SAndrew.Bardsley@arm.com# built for the same host system. 5910259SAndrew.Bardsley@arm.com# 6010259SAndrew.Bardsley@arm.com# Examples: 6110259SAndrew.Bardsley@arm.com# 6210259SAndrew.Bardsley@arm.com# The following two commands are equivalent. The '-u' option tells 6310259SAndrew.Bardsley@arm.com# scons to search up the directory tree for this SConstruct file. 6410259SAndrew.Bardsley@arm.com# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 6510259SAndrew.Bardsley@arm.com# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 6610259SAndrew.Bardsley@arm.com# 6710259SAndrew.Bardsley@arm.com# The following two commands are equivalent and demonstrate building 6810259SAndrew.Bardsley@arm.com# in a directory outside of the source tree. The '-C' option tells 6910259SAndrew.Bardsley@arm.com# scons to chdir to the specified directory to find this SConstruct 7010259SAndrew.Bardsley@arm.com# file. 7110259SAndrew.Bardsley@arm.com# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 7210259SAndrew.Bardsley@arm.com# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 7310259SAndrew.Bardsley@arm.com# 7410259SAndrew.Bardsley@arm.com# You can use 'scons -H' to print scons options. If you're in this 7510259SAndrew.Bardsley@arm.com# 'gem5' directory (or use -u or -C to tell scons where to find this 7610259SAndrew.Bardsley@arm.com# file), you can use 'scons -h' to print all the gem5-specific build 7710259SAndrew.Bardsley@arm.com# options as well. 7810259SAndrew.Bardsley@arm.com# 7910259SAndrew.Bardsley@arm.com################################################### 8010259SAndrew.Bardsley@arm.com 8110259SAndrew.Bardsley@arm.com# Check for recent-enough Python and SCons versions. 8210259SAndrew.Bardsley@arm.comtry: 8310259SAndrew.Bardsley@arm.com # Really old versions of scons only take two options for the 8410259SAndrew.Bardsley@arm.com # function, so check once without the revision and once with the 8510259SAndrew.Bardsley@arm.com # revision, the first instance will fail for stuff other than 8610259SAndrew.Bardsley@arm.com # 0.98, and the second will fail for 0.98.0 8710259SAndrew.Bardsley@arm.com EnsureSConsVersion(0, 98) 8810259SAndrew.Bardsley@arm.com EnsureSConsVersion(0, 98, 1) 8910259SAndrew.Bardsley@arm.comexcept SystemExit, e: 9010259SAndrew.Bardsley@arm.com print """ 9110259SAndrew.Bardsley@arm.comFor more details, see: 9210259SAndrew.Bardsley@arm.com http://gem5.org/Dependencies 9310259SAndrew.Bardsley@arm.com""" 9410259SAndrew.Bardsley@arm.com raise 9510259SAndrew.Bardsley@arm.com 9610259SAndrew.Bardsley@arm.com# We ensure the python version early because because python-config 9710259SAndrew.Bardsley@arm.com# requires python 2.5 9810259SAndrew.Bardsley@arm.comtry: 9910259SAndrew.Bardsley@arm.com EnsurePythonVersion(2, 5) 10010259SAndrew.Bardsley@arm.comexcept SystemExit, e: 10110259SAndrew.Bardsley@arm.com print """ 10210259SAndrew.Bardsley@arm.comYou can use a non-default installation of the Python interpreter by 10310259SAndrew.Bardsley@arm.comrearranging your PATH so that scons finds the non-default 'python' and 10410259SAndrew.Bardsley@arm.com'python-config' first. 10510259SAndrew.Bardsley@arm.com 10610259SAndrew.Bardsley@arm.comFor more details, see: 10710259SAndrew.Bardsley@arm.com http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 10810259SAndrew.Bardsley@arm.com""" 10910259SAndrew.Bardsley@arm.com raise 11010259SAndrew.Bardsley@arm.com 11110259SAndrew.Bardsley@arm.com# Global Python includes 11210259SAndrew.Bardsley@arm.comimport itertools 11310259SAndrew.Bardsley@arm.comimport os 11410259SAndrew.Bardsley@arm.comimport re 11510259SAndrew.Bardsley@arm.comimport shutil 11610259SAndrew.Bardsley@arm.comimport subprocess 11710259SAndrew.Bardsley@arm.comimport sys 11810259SAndrew.Bardsley@arm.com 11910259SAndrew.Bardsley@arm.comfrom os import mkdir, environ 12010259SAndrew.Bardsley@arm.comfrom os.path import abspath, basename, dirname, expanduser, normpath 12110259SAndrew.Bardsley@arm.comfrom os.path import exists, isdir, isfile 12210259SAndrew.Bardsley@arm.comfrom os.path import join as joinpath, split as splitpath 12310259SAndrew.Bardsley@arm.com 12410259SAndrew.Bardsley@arm.com# SCons includes 12510259SAndrew.Bardsley@arm.comimport SCons 12610259SAndrew.Bardsley@arm.comimport SCons.Node 12710259SAndrew.Bardsley@arm.com 12810259SAndrew.Bardsley@arm.comextra_python_paths = [ 12910259SAndrew.Bardsley@arm.com Dir('src/python').srcnode().abspath, # gem5 includes 13010259SAndrew.Bardsley@arm.com Dir('ext/ply').srcnode().abspath, # ply is used by several files 13110259SAndrew.Bardsley@arm.com ] 13210259SAndrew.Bardsley@arm.com 13310259SAndrew.Bardsley@arm.comsys.path[1:1] = extra_python_paths 13410259SAndrew.Bardsley@arm.com 13510259SAndrew.Bardsley@arm.comfrom m5.util import compareVersions, readCommand 13610259SAndrew.Bardsley@arm.comfrom m5.util.terminal import get_termcap 13710259SAndrew.Bardsley@arm.com 13810259SAndrew.Bardsley@arm.comhelp_texts = { 13910259SAndrew.Bardsley@arm.com "options" : "", 14010259SAndrew.Bardsley@arm.com "global_vars" : "", 14110259SAndrew.Bardsley@arm.com "local_vars" : "" 14210259SAndrew.Bardsley@arm.com} 14310259SAndrew.Bardsley@arm.com 14410259SAndrew.Bardsley@arm.comExport("help_texts") 14510259SAndrew.Bardsley@arm.com 14610259SAndrew.Bardsley@arm.com 14710259SAndrew.Bardsley@arm.com# There's a bug in scons in that (1) by default, the help texts from 14810259SAndrew.Bardsley@arm.com# AddOption() are supposed to be displayed when you type 'scons -h' 14910259SAndrew.Bardsley@arm.com# and (2) you can override the help displayed by 'scons -h' using the 15010259SAndrew.Bardsley@arm.com# Help() function, but these two features are incompatible: once 15110259SAndrew.Bardsley@arm.com# you've overridden the help text using Help(), there's no way to get 15210259SAndrew.Bardsley@arm.com# at the help texts from AddOptions. See: 15310259SAndrew.Bardsley@arm.com# http://scons.tigris.org/issues/show_bug.cgi?id=2356 15410259SAndrew.Bardsley@arm.com# http://scons.tigris.org/issues/show_bug.cgi?id=2611 155# This hack lets us extract the help text from AddOptions and 156# re-inject it via Help(). Ideally someday this bug will be fixed and 157# we can just use AddOption directly. 158def AddLocalOption(*args, **kwargs): 159 col_width = 30 160 161 help = " " + ", ".join(args) 162 if "help" in kwargs: 163 length = len(help) 164 if length >= col_width: 165 help += "\n" + " " * col_width 166 else: 167 help += " " * (col_width - length) 168 help += kwargs["help"] 169 help_texts["options"] += help + "\n" 170 171 AddOption(*args, **kwargs) 172 173AddLocalOption('--colors', dest='use_colors', action='store_true', 174 help="Add color to abbreviated scons output") 175AddLocalOption('--no-colors', dest='use_colors', action='store_false', 176 help="Don't add color to abbreviated scons output") 177AddLocalOption('--with-cxx-config', dest='with_cxx_config', 178 action='store_true', 179 help="Build with support for C++-based configuration") 180AddLocalOption('--default', dest='default', type='string', action='store', 181 help='Override which build_opts file to use for defaults') 182AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 183 help='Disable style checking hooks') 184AddLocalOption('--no-lto', dest='no_lto', action='store_true', 185 help='Disable Link-Time Optimization for fast') 186AddLocalOption('--update-ref', dest='update_ref', action='store_true', 187 help='Update test reference outputs') 188AddLocalOption('--verbose', dest='verbose', action='store_true', 189 help='Print full tool command lines') 190AddLocalOption('--without-python', dest='without_python', 191 action='store_true', 192 help='Build without Python configuration support') 193AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 194 action='store_true', 195 help='Disable linking against tcmalloc') 196AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 197 help='Build with Undefined Behavior Sanitizer if available') 198AddLocalOption('--with-asan', dest='with_asan', action='store_true', 199 help='Build with Address Sanitizer if available') 200 201termcap = get_termcap(GetOption('use_colors')) 202 203######################################################################## 204# 205# Set up the main build environment. 206# 207######################################################################## 208 209# export TERM so that clang reports errors in color 210use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 211 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC', 212 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ]) 213 214use_prefixes = [ 215 "ASAN_", # address sanitizer symbolizer path and settings 216 "CCACHE_", # ccache (caching compiler wrapper) configuration 217 "CCC_", # clang static analyzer configuration 218 "DISTCC_", # distcc (distributed compiler wrapper) configuration 219 "INCLUDE_SERVER_", # distcc pump server settings 220 "M5", # M5 configuration (e.g., path to kernels) 221 ] 222 223use_env = {} 224for key,val in sorted(os.environ.iteritems()): 225 if key in use_vars or \ 226 any([key.startswith(prefix) for prefix in use_prefixes]): 227 use_env[key] = val 228 229# Tell scons to avoid implicit command dependencies to avoid issues 230# with the param wrappes being compiled twice (see 231# http://scons.tigris.org/issues/show_bug.cgi?id=2811) 232main = Environment(ENV=use_env, IMPLICIT_COMMAND_DEPENDENCIES=0) 233main.Decider('MD5-timestamp') 234main.root = Dir(".") # The current directory (where this file lives). 235main.srcdir = Dir("src") # The source directory 236 237main_dict_keys = main.Dictionary().keys() 238 239# Check that we have a C/C++ compiler 240if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 241 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)" 242 Exit(1) 243 244# Check that swig is present 245if not 'SWIG' in main_dict_keys: 246 print "swig is not installed (package swig on Ubuntu and RedHat)" 247 Exit(1) 248 249# add useful python code PYTHONPATH so it can be used by subprocesses 250# as well 251main.AppendENVPath('PYTHONPATH', extra_python_paths) 252 253######################################################################## 254# 255# Mercurial Stuff. 256# 257# If the gem5 directory is a mercurial repository, we should do some 258# extra things. 259# 260######################################################################## 261 262hgdir = main.root.Dir(".hg") 263 264 265style_message = """ 266You're missing the gem5 style hook, which automatically checks your code 267against the gem5 style rules on %s. 268This script will now install the hook in your %s. 269Press enter to continue, or ctrl-c to abort: """ 270 271mercurial_style_message = """ 272You're missing the gem5 style hook, which automatically checks your code 273against the gem5 style rules on hg commit and qrefresh commands. 274This script will now install the hook in your .hg/hgrc file. 275Press enter to continue, or ctrl-c to abort: """ 276 277git_style_message = """ 278You're missing the gem5 style or commit message hook. These hooks help 279to ensure that your code follows gem5's style rules on git commit. 280This script will now install the hook in your .git/hooks/ directory. 281Press enter to continue, or ctrl-c to abort: """ 282 283mercurial_style_upgrade_message = """ 284Your Mercurial style hooks are not up-to-date. This script will now 285try to automatically update them. A backup of your hgrc will be saved 286in .hg/hgrc.old. 287Press enter to continue, or ctrl-c to abort: """ 288 289mercurial_style_hook = """ 290# The following lines were automatically added by gem5/SConstruct 291# to provide the gem5 style-checking hooks 292[extensions] 293hgstyle = %s/util/hgstyle.py 294 295[hooks] 296pretxncommit.style = python:hgstyle.check_style 297pre-qrefresh.style = python:hgstyle.check_style 298# End of SConstruct additions 299 300""" % (main.root.abspath) 301 302mercurial_lib_not_found = """ 303Mercurial libraries cannot be found, ignoring style hook. If 304you are a gem5 developer, please fix this and run the style 305hook. It is important. 306""" 307 308# Check for style hook and prompt for installation if it's not there. 309# Skip this if --ignore-style was specified, there's no interactive 310# terminal to prompt, or no recognized revision control system can be 311# found. 312ignore_style = GetOption('ignore_style') or not sys.stdin.isatty() 313 314# Try wire up Mercurial to the style hooks 315if not ignore_style and hgdir.exists(): 316 style_hook = True 317 style_hooks = tuple() 318 hgrc = hgdir.File('hgrc') 319 hgrc_old = hgdir.File('hgrc.old') 320 try: 321 from mercurial import ui 322 ui = ui.ui() 323 ui.readconfig(hgrc.abspath) 324 style_hooks = (ui.config('hooks', 'pretxncommit.style', None), 325 ui.config('hooks', 'pre-qrefresh.style', None)) 326 style_hook = all(style_hooks) 327 style_extension = ui.config('extensions', 'style', None) 328 except ImportError: 329 print mercurial_lib_not_found 330 331 if "python:style.check_style" in style_hooks: 332 # Try to upgrade the style hooks 333 print mercurial_style_upgrade_message 334 # continue unless user does ctrl-c/ctrl-d etc. 335 try: 336 raw_input() 337 except: 338 print "Input exception, exiting scons.\n" 339 sys.exit(1) 340 shutil.copyfile(hgrc.abspath, hgrc_old.abspath) 341 re_style_hook = re.compile(r"^([^=#]+)\.style\s*=\s*([^#\s]+).*") 342 re_style_extension = re.compile("style\s*=\s*([^#\s]+).*") 343 old, new = open(hgrc_old.abspath, 'r'), open(hgrc.abspath, 'w') 344 for l in old: 345 m_hook = re_style_hook.match(l) 346 m_ext = re_style_extension.match(l) 347 if m_hook: 348 hook, check = m_hook.groups() 349 if check != "python:style.check_style": 350 print "Warning: %s.style is using a non-default " \ 351 "checker: %s" % (hook, check) 352 if hook not in ("pretxncommit", "pre-qrefresh"): 353 print "Warning: Updating unknown style hook: %s" % hook 354 355 l = "%s.style = python:hgstyle.check_style\n" % hook 356 elif m_ext and m_ext.group(1) == style_extension: 357 l = "hgstyle = %s/util/hgstyle.py\n" % main.root.abspath 358 359 new.write(l) 360 elif not style_hook: 361 print mercurial_style_message, 362 # continue unless user does ctrl-c/ctrl-d etc. 363 try: 364 raw_input() 365 except: 366 print "Input exception, exiting scons.\n" 367 sys.exit(1) 368 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 369 print "Adding style hook to", hgrc_path, "\n" 370 try: 371 with open(hgrc_path, 'a') as f: 372 f.write(mercurial_style_hook) 373 except: 374 print "Error updating", hgrc_path 375 sys.exit(1) 376 377def install_git_style_hooks(): 378 try: 379 gitdir = Dir(readCommand( 380 ["git", "rev-parse", "--git-dir"]).strip("\n")) 381 except Exception, e: 382 print "Warning: Failed to find git repo directory: %s" % e 383 return 384 385 git_hooks = gitdir.Dir("hooks") 386 def hook_exists(hook_name): 387 hook = git_hooks.File(hook_name) 388 return hook.exists() 389 390 def hook_install(hook_name, script): 391 hook = git_hooks.File(hook_name) 392 if hook.exists(): 393 print "Warning: Can't install %s, hook already exists." % hook_name 394 return 395 396 if hook.islink(): 397 print "Warning: Removing broken symlink for hook %s." % hook_name 398 os.unlink(hook.get_abspath()) 399 400 if not git_hooks.exists(): 401 mkdir(git_hooks.get_abspath()) 402 git_hooks.clear() 403 404 abs_symlink_hooks = git_hooks.islink() and \ 405 os.path.isabs(os.readlink(git_hooks.get_abspath())) 406 407 # Use a relative symlink if the hooks live in the source directory, 408 # and the hooks directory is not a symlink to an absolute path. 409 if hook.is_under(main.root) and not abs_symlink_hooks: 410 script_path = os.path.relpath( 411 os.path.realpath(script.get_abspath()), 412 os.path.realpath(hook.Dir(".").get_abspath())) 413 else: 414 script_path = script.get_abspath() 415 416 try: 417 os.symlink(script_path, hook.get_abspath()) 418 except: 419 print "Error updating git %s hook" % hook_name 420 raise 421 422 if hook_exists("pre-commit") and hook_exists("commit-msg"): 423 return 424 425 print git_style_message, 426 try: 427 raw_input() 428 except: 429 print "Input exception, exiting scons.\n" 430 sys.exit(1) 431 432 git_style_script = File("util/git-pre-commit.py") 433 git_msg_script = File("ext/git-commit-msg") 434 435 hook_install("pre-commit", git_style_script) 436 hook_install("commit-msg", git_msg_script) 437 438# Try to wire up git to the style hooks 439if not ignore_style and main.root.Entry(".git").exists(): 440 install_git_style_hooks() 441 442################################################### 443# 444# Figure out which configurations to set up based on the path(s) of 445# the target(s). 446# 447################################################### 448 449# Find default configuration & binary. 450Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 451 452# helper function: find last occurrence of element in list 453def rfind(l, elt, offs = -1): 454 for i in range(len(l)+offs, 0, -1): 455 if l[i] == elt: 456 return i 457 raise ValueError, "element not found" 458 459# Take a list of paths (or SCons Nodes) and return a list with all 460# paths made absolute and ~-expanded. Paths will be interpreted 461# relative to the launch directory unless a different root is provided 462def makePathListAbsolute(path_list, root=GetLaunchDir()): 463 return [abspath(joinpath(root, expanduser(str(p)))) 464 for p in path_list] 465 466# Each target must have 'build' in the interior of the path; the 467# directory below this will determine the build parameters. For 468# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 469# recognize that ALPHA_SE specifies the configuration because it 470# follow 'build' in the build path. 471 472# The funky assignment to "[:]" is needed to replace the list contents 473# in place rather than reassign the symbol to a new list, which 474# doesn't work (obviously!). 475BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 476 477# Generate a list of the unique build roots and configs that the 478# collected targets reference. 479variant_paths = [] 480build_root = None 481for t in BUILD_TARGETS: 482 path_dirs = t.split('/') 483 try: 484 build_top = rfind(path_dirs, 'build', -2) 485 except: 486 print "Error: no non-leaf 'build' dir found on target path", t 487 Exit(1) 488 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 489 if not build_root: 490 build_root = this_build_root 491 else: 492 if this_build_root != build_root: 493 print "Error: build targets not under same build root\n"\ 494 " %s\n %s" % (build_root, this_build_root) 495 Exit(1) 496 variant_path = joinpath('/',*path_dirs[:build_top+2]) 497 if variant_path not in variant_paths: 498 variant_paths.append(variant_path) 499 500# Make sure build_root exists (might not if this is the first build there) 501if not isdir(build_root): 502 mkdir(build_root) 503main['BUILDROOT'] = build_root 504 505Export('main') 506 507main.SConsignFile(joinpath(build_root, "sconsign")) 508 509# Default duplicate option is to use hard links, but this messes up 510# when you use emacs to edit a file in the target dir, as emacs moves 511# file to file~ then copies to file, breaking the link. Symbolic 512# (soft) links work better. 513main.SetOption('duplicate', 'soft-copy') 514 515# 516# Set up global sticky variables... these are common to an entire build 517# tree (not specific to a particular build like ALPHA_SE) 518# 519 520global_vars_file = joinpath(build_root, 'variables.global') 521 522global_vars = Variables(global_vars_file, args=ARGUMENTS) 523 524global_vars.AddVariables( 525 ('CC', 'C compiler', environ.get('CC', main['CC'])), 526 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 527 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 528 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 529 ('BATCH', 'Use batch pool for build and tests', False), 530 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 531 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 532 ('EXTRAS', 'Add extra directories to the compilation', '') 533 ) 534 535# Update main environment with values from ARGUMENTS & global_vars_file 536global_vars.Update(main) 537help_texts["global_vars"] += global_vars.GenerateHelpText(main) 538 539# Save sticky variable settings back to current variables file 540global_vars.Save(global_vars_file, main) 541 542# Parse EXTRAS variable to build list of all directories where we're 543# look for sources etc. This list is exported as extras_dir_list. 544base_dir = main.srcdir.abspath 545if main['EXTRAS']: 546 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 547else: 548 extras_dir_list = [] 549 550Export('base_dir') 551Export('extras_dir_list') 552 553# the ext directory should be on the #includes path 554main.Append(CPPPATH=[Dir('ext')]) 555 556def strip_build_path(path, env): 557 path = str(path) 558 variant_base = env['BUILDROOT'] + os.path.sep 559 if path.startswith(variant_base): 560 path = path[len(variant_base):] 561 elif path.startswith('build/'): 562 path = path[6:] 563 return path 564 565# Generate a string of the form: 566# common/path/prefix/src1, src2 -> tgt1, tgt2 567# to print while building. 568class Transform(object): 569 # all specific color settings should be here and nowhere else 570 tool_color = termcap.Normal 571 pfx_color = termcap.Yellow 572 srcs_color = termcap.Yellow + termcap.Bold 573 arrow_color = termcap.Blue + termcap.Bold 574 tgts_color = termcap.Yellow + termcap.Bold 575 576 def __init__(self, tool, max_sources=99): 577 self.format = self.tool_color + (" [%8s] " % tool) \ 578 + self.pfx_color + "%s" \ 579 + self.srcs_color + "%s" \ 580 + self.arrow_color + " -> " \ 581 + self.tgts_color + "%s" \ 582 + termcap.Normal 583 self.max_sources = max_sources 584 585 def __call__(self, target, source, env, for_signature=None): 586 # truncate source list according to max_sources param 587 source = source[0:self.max_sources] 588 def strip(f): 589 return strip_build_path(str(f), env) 590 if len(source) > 0: 591 srcs = map(strip, source) 592 else: 593 srcs = [''] 594 tgts = map(strip, target) 595 # surprisingly, os.path.commonprefix is a dumb char-by-char string 596 # operation that has nothing to do with paths. 597 com_pfx = os.path.commonprefix(srcs + tgts) 598 com_pfx_len = len(com_pfx) 599 if com_pfx: 600 # do some cleanup and sanity checking on common prefix 601 if com_pfx[-1] == ".": 602 # prefix matches all but file extension: ok 603 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 604 com_pfx = com_pfx[0:-1] 605 elif com_pfx[-1] == "/": 606 # common prefix is directory path: OK 607 pass 608 else: 609 src0_len = len(srcs[0]) 610 tgt0_len = len(tgts[0]) 611 if src0_len == com_pfx_len: 612 # source is a substring of target, OK 613 pass 614 elif tgt0_len == com_pfx_len: 615 # target is a substring of source, need to back up to 616 # avoid empty string on RHS of arrow 617 sep_idx = com_pfx.rfind(".") 618 if sep_idx != -1: 619 com_pfx = com_pfx[0:sep_idx] 620 else: 621 com_pfx = '' 622 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 623 # still splitting at file extension: ok 624 pass 625 else: 626 # probably a fluke; ignore it 627 com_pfx = '' 628 # recalculate length in case com_pfx was modified 629 com_pfx_len = len(com_pfx) 630 def fmt(files): 631 f = map(lambda s: s[com_pfx_len:], files) 632 return ', '.join(f) 633 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 634 635Export('Transform') 636 637# enable the regression script to use the termcap 638main['TERMCAP'] = termcap 639 640if GetOption('verbose'): 641 def MakeAction(action, string, *args, **kwargs): 642 return Action(action, *args, **kwargs) 643else: 644 MakeAction = Action 645 main['CCCOMSTR'] = Transform("CC") 646 main['CXXCOMSTR'] = Transform("CXX") 647 main['ASCOMSTR'] = Transform("AS") 648 main['SWIGCOMSTR'] = Transform("SWIG") 649 main['ARCOMSTR'] = Transform("AR", 0) 650 main['LINKCOMSTR'] = Transform("LINK", 0) 651 main['SHLINKCOMSTR'] = Transform("SHLINK", 0) 652 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 653 main['M4COMSTR'] = Transform("M4") 654 main['SHCCCOMSTR'] = Transform("SHCC") 655 main['SHCXXCOMSTR'] = Transform("SHCXX") 656Export('MakeAction') 657 658# Initialize the Link-Time Optimization (LTO) flags 659main['LTO_CCFLAGS'] = [] 660main['LTO_LDFLAGS'] = [] 661 662# According to the readme, tcmalloc works best if the compiler doesn't 663# assume that we're using the builtin malloc and friends. These flags 664# are compiler-specific, so we need to set them after we detect which 665# compiler we're using. 666main['TCMALLOC_CCFLAGS'] = [] 667 668CXX_version = readCommand([main['CXX'],'--version'], exception=False) 669CXX_V = readCommand([main['CXX'],'-V'], exception=False) 670 671main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 672main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 673if main['GCC'] + main['CLANG'] > 1: 674 print 'Error: How can we have two at the same time?' 675 Exit(1) 676 677# Set up default C++ compiler flags 678if main['GCC'] or main['CLANG']: 679 # As gcc and clang share many flags, do the common parts here 680 main.Append(CCFLAGS=['-pipe']) 681 main.Append(CCFLAGS=['-fno-strict-aliasing']) 682 # Enable -Wall and -Wextra and then disable the few warnings that 683 # we consistently violate 684 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 685 '-Wno-sign-compare', '-Wno-unused-parameter']) 686 # We always compile using C++11 687 main.Append(CXXFLAGS=['-std=c++11']) 688 if sys.platform.startswith('freebsd'): 689 main.Append(CCFLAGS=['-I/usr/local/include']) 690 main.Append(CXXFLAGS=['-I/usr/local/include']) 691 692 main['FILTER_PSHLINKFLAGS'] = lambda x: str(x).replace(' -shared', '') 693 main['PSHLINKFLAGS'] = main.subst('${FILTER_PSHLINKFLAGS(SHLINKFLAGS)}') 694 main['PLINKFLAGS'] = main.subst('${LINKFLAGS}') 695 shared_partial_flags = ['-Wl,--relocatable', '-nostdlib'] 696 main.Append(PSHLINKFLAGS=shared_partial_flags) 697 main.Append(PLINKFLAGS=shared_partial_flags) 698else: 699 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 700 print "Don't know what compiler options to use for your compiler." 701 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 702 print termcap.Yellow + ' version:' + termcap.Normal, 703 if not CXX_version: 704 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 705 termcap.Normal 706 else: 707 print CXX_version.replace('\n', '<nl>') 708 print " If you're trying to use a compiler other than GCC" 709 print " or clang, there appears to be something wrong with your" 710 print " environment." 711 print " " 712 print " If you are trying to use a compiler other than those listed" 713 print " above you will need to ease fix SConstruct and " 714 print " src/SConscript to support that compiler." 715 Exit(1) 716 717if main['GCC']: 718 # Check for a supported version of gcc. >= 4.8 is chosen for its 719 # level of c++11 support. See 720 # http://gcc.gnu.org/projects/cxx0x.html for details. 721 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 722 if compareVersions(gcc_version, "4.8") < 0: 723 print 'Error: gcc version 4.8 or newer required.' 724 print ' Installed version:', gcc_version 725 Exit(1) 726 727 main['GCC_VERSION'] = gcc_version 728 729 # gcc from version 4.8 and above generates "rep; ret" instructions 730 # to avoid performance penalties on certain AMD chips. Older 731 # assemblers detect this as an error, "Error: expecting string 732 # instruction after `rep'" 733 as_version_raw = readCommand([main['AS'], '-v', '/dev/null', 734 '-o', '/dev/null'], 735 exception=False).split() 736 737 # version strings may contain extra distro-specific 738 # qualifiers, so play it safe and keep only what comes before 739 # the first hyphen 740 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None 741 742 if not as_version or compareVersions(as_version, "2.23") < 0: 743 print termcap.Yellow + termcap.Bold + \ 744 'Warning: This combination of gcc and binutils have' + \ 745 ' known incompatibilities.\n' + \ 746 ' If you encounter build problems, please update ' + \ 747 'binutils to 2.23.' + \ 748 termcap.Normal 749 750 # Make sure we warn if the user has requested to compile with the 751 # Undefined Benahvior Sanitizer and this version of gcc does not 752 # support it. 753 if GetOption('with_ubsan') and \ 754 compareVersions(gcc_version, '4.9') < 0: 755 print termcap.Yellow + termcap.Bold + \ 756 'Warning: UBSan is only supported using gcc 4.9 and later.' + \ 757 termcap.Normal 758 759 # Add the appropriate Link-Time Optimization (LTO) flags 760 # unless LTO is explicitly turned off. Note that these flags 761 # are only used by the fast target. 762 if not GetOption('no_lto'): 763 # Pass the LTO flag when compiling to produce GIMPLE 764 # output, we merely create the flags here and only append 765 # them later 766 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 767 768 # Use the same amount of jobs for LTO as we are running 769 # scons with 770 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 771 772 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 773 '-fno-builtin-realloc', '-fno-builtin-free']) 774 775 # add option to check for undeclared overrides 776 if compareVersions(gcc_version, "5.0") > 0: 777 main.Append(CCFLAGS=['-Wno-error=suggest-override']) 778 779elif main['CLANG']: 780 # Check for a supported version of clang, >= 3.1 is needed to 781 # support similar features as gcc 4.8. See 782 # http://clang.llvm.org/cxx_status.html for details 783 clang_version_re = re.compile(".* version (\d+\.\d+)") 784 clang_version_match = clang_version_re.search(CXX_version) 785 if (clang_version_match): 786 clang_version = clang_version_match.groups()[0] 787 if compareVersions(clang_version, "3.1") < 0: 788 print 'Error: clang version 3.1 or newer required.' 789 print ' Installed version:', clang_version 790 Exit(1) 791 else: 792 print 'Error: Unable to determine clang version.' 793 Exit(1) 794 795 # clang has a few additional warnings that we disable, extraneous 796 # parantheses are allowed due to Ruby's printing of the AST, 797 # finally self assignments are allowed as the generated CPU code 798 # is relying on this 799 main.Append(CCFLAGS=['-Wno-parentheses', 800 '-Wno-self-assign', 801 # Some versions of libstdc++ (4.8?) seem to 802 # use struct hash and class hash 803 # interchangeably. 804 '-Wno-mismatched-tags', 805 ]) 806 807 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 808 809 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 810 # opposed to libstdc++, as the later is dated. 811 if sys.platform == "darwin": 812 main.Append(CXXFLAGS=['-stdlib=libc++']) 813 main.Append(LIBS=['c++']) 814 815 # On FreeBSD we need libthr. 816 if sys.platform.startswith('freebsd'): 817 main.Append(LIBS=['thr']) 818 819else: 820 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 821 print "Don't know what compiler options to use for your compiler." 822 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 823 print termcap.Yellow + ' version:' + termcap.Normal, 824 if not CXX_version: 825 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 826 termcap.Normal 827 else: 828 print CXX_version.replace('\n', '<nl>') 829 print " If you're trying to use a compiler other than GCC" 830 print " or clang, there appears to be something wrong with your" 831 print " environment." 832 print " " 833 print " If you are trying to use a compiler other than those listed" 834 print " above you will need to ease fix SConstruct and " 835 print " src/SConscript to support that compiler." 836 Exit(1) 837 838# Set up common yacc/bison flags (needed for Ruby) 839main['YACCFLAGS'] = '-d' 840main['YACCHXXFILESUFFIX'] = '.hh' 841 842# Do this after we save setting back, or else we'll tack on an 843# extra 'qdo' every time we run scons. 844if main['BATCH']: 845 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 846 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 847 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 848 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 849 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 850 851if sys.platform == 'cygwin': 852 # cygwin has some header file issues... 853 main.Append(CCFLAGS=["-Wno-uninitialized"]) 854 855# Check for the protobuf compiler 856protoc_version = readCommand([main['PROTOC'], '--version'], 857 exception='').split() 858 859# First two words should be "libprotoc x.y.z" 860if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 861 print termcap.Yellow + termcap.Bold + \ 862 'Warning: Protocol buffer compiler (protoc) not found.\n' + \ 863 ' Please install protobuf-compiler for tracing support.' + \ 864 termcap.Normal 865 main['PROTOC'] = False 866else: 867 # Based on the availability of the compress stream wrappers, 868 # require 2.1.0 869 min_protoc_version = '2.1.0' 870 if compareVersions(protoc_version[1], min_protoc_version) < 0: 871 print termcap.Yellow + termcap.Bold + \ 872 'Warning: protoc version', min_protoc_version, \ 873 'or newer required.\n' + \ 874 ' Installed version:', protoc_version[1], \ 875 termcap.Normal 876 main['PROTOC'] = False 877 else: 878 # Attempt to determine the appropriate include path and 879 # library path using pkg-config, that means we also need to 880 # check for pkg-config. Note that it is possible to use 881 # protobuf without the involvement of pkg-config. Later on we 882 # check go a library config check and at that point the test 883 # will fail if libprotobuf cannot be found. 884 if readCommand(['pkg-config', '--version'], exception=''): 885 try: 886 # Attempt to establish what linking flags to add for protobuf 887 # using pkg-config 888 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 889 except: 890 print termcap.Yellow + termcap.Bold + \ 891 'Warning: pkg-config could not get protobuf flags.' + \ 892 termcap.Normal 893 894# Check for SWIG 895if not main.has_key('SWIG'): 896 print 'Error: SWIG utility not found.' 897 print ' Please install (see http://www.swig.org) and retry.' 898 Exit(1) 899 900# Check for appropriate SWIG version 901swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 902# First 3 words should be "SWIG Version x.y.z" 903if len(swig_version) < 3 or \ 904 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 905 print 'Error determining SWIG version.' 906 Exit(1) 907 908min_swig_version = '2.0.4' 909if compareVersions(swig_version[2], min_swig_version) < 0: 910 print 'Error: SWIG version', min_swig_version, 'or newer required.' 911 print ' Installed version:', swig_version[2] 912 Exit(1) 913 914# Check for known incompatibilities. The standard library shipped with 915# gcc >= 4.9 does not play well with swig versions prior to 3.0 916if main['GCC'] and compareVersions(gcc_version, '4.9') >= 0 and \ 917 compareVersions(swig_version[2], '3.0') < 0: 918 print termcap.Yellow + termcap.Bold + \ 919 'Warning: This combination of gcc and swig have' + \ 920 ' known incompatibilities.\n' + \ 921 ' If you encounter build problems, please update ' + \ 922 'swig to 3.0 or later.' + \ 923 termcap.Normal 924 925# Set up SWIG flags & scanner 926swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 927main.Append(SWIGFLAGS=swig_flags) 928 929# Check for 'timeout' from GNU coreutils. If present, regressions will 930# be run with a time limit. We require version 8.13 since we rely on 931# support for the '--foreground' option. 932if sys.platform.startswith('freebsd'): 933 timeout_lines = readCommand(['gtimeout', '--version'], 934 exception='').splitlines() 935else: 936 timeout_lines = readCommand(['timeout', '--version'], 937 exception='').splitlines() 938# Get the first line and tokenize it 939timeout_version = timeout_lines[0].split() if timeout_lines else [] 940main['TIMEOUT'] = timeout_version and \ 941 compareVersions(timeout_version[-1], '8.13') >= 0 942 943# filter out all existing swig scanners, they mess up the dependency 944# stuff for some reason 945scanners = [] 946for scanner in main['SCANNERS']: 947 skeys = scanner.skeys 948 if skeys == '.i': 949 continue 950 951 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 952 continue 953 954 scanners.append(scanner) 955 956# add the new swig scanner that we like better 957from SCons.Scanner import ClassicCPP as CPPScanner 958swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 959scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 960 961# replace the scanners list that has what we want 962main['SCANNERS'] = scanners 963 964# Add a custom Check function to test for structure members. 965def CheckMember(context, include, decl, member, include_quotes="<>"): 966 context.Message("Checking for member %s in %s..." % 967 (member, decl)) 968 text = """ 969#include %(header)s 970int main(){ 971 %(decl)s test; 972 (void)test.%(member)s; 973 return 0; 974}; 975""" % { "header" : include_quotes[0] + include + include_quotes[1], 976 "decl" : decl, 977 "member" : member, 978 } 979 980 ret = context.TryCompile(text, extension=".cc") 981 context.Result(ret) 982 return ret 983 984# Platform-specific configuration. Note again that we assume that all 985# builds under a given build root run on the same host platform. 986conf = Configure(main, 987 conf_dir = joinpath(build_root, '.scons_config'), 988 log_file = joinpath(build_root, 'scons_config.log'), 989 custom_tests = { 990 'CheckMember' : CheckMember, 991 }) 992 993# Check if we should compile a 64 bit binary on Mac OS X/Darwin 994try: 995 import platform 996 uname = platform.uname() 997 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 998 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 999 main.Append(CCFLAGS=['-arch', 'x86_64']) 1000 main.Append(CFLAGS=['-arch', 'x86_64']) 1001 main.Append(LINKFLAGS=['-arch', 'x86_64']) 1002 main.Append(ASFLAGS=['-arch', 'x86_64']) 1003except: 1004 pass 1005 1006# Recent versions of scons substitute a "Null" object for Configure() 1007# when configuration isn't necessary, e.g., if the "--help" option is 1008# present. Unfortuantely this Null object always returns false, 1009# breaking all our configuration checks. We replace it with our own 1010# more optimistic null object that returns True instead. 1011if not conf: 1012 def NullCheck(*args, **kwargs): 1013 return True 1014 1015 class NullConf: 1016 def __init__(self, env): 1017 self.env = env 1018 def Finish(self): 1019 return self.env 1020 def __getattr__(self, mname): 1021 return NullCheck 1022 1023 conf = NullConf(main) 1024 1025# Cache build files in the supplied directory. 1026if main['M5_BUILD_CACHE']: 1027 print 'Using build cache located at', main['M5_BUILD_CACHE'] 1028 CacheDir(main['M5_BUILD_CACHE']) 1029 1030if not GetOption('without_python'): 1031 # Find Python include and library directories for embedding the 1032 # interpreter. We rely on python-config to resolve the appropriate 1033 # includes and linker flags. ParseConfig does not seem to understand 1034 # the more exotic linker flags such as -Xlinker and -export-dynamic so 1035 # we add them explicitly below. If you want to link in an alternate 1036 # version of python, see above for instructions on how to invoke 1037 # scons with the appropriate PATH set. 1038 # 1039 # First we check if python2-config exists, else we use python-config 1040 python_config = readCommand(['which', 'python2-config'], 1041 exception='').strip() 1042 if not os.path.exists(python_config): 1043 python_config = readCommand(['which', 'python-config'], 1044 exception='').strip() 1045 py_includes = readCommand([python_config, '--includes'], 1046 exception='').split() 1047 # Strip the -I from the include folders before adding them to the 1048 # CPPPATH 1049 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes)) 1050 1051 # Read the linker flags and split them into libraries and other link 1052 # flags. The libraries are added later through the call the CheckLib. 1053 py_ld_flags = readCommand([python_config, '--ldflags'], 1054 exception='').split() 1055 py_libs = [] 1056 for lib in py_ld_flags: 1057 if not lib.startswith('-l'): 1058 main.Append(LINKFLAGS=[lib]) 1059 else: 1060 lib = lib[2:] 1061 if lib not in py_libs: 1062 py_libs.append(lib) 1063 1064 # verify that this stuff works 1065 if not conf.CheckHeader('Python.h', '<>'): 1066 print "Error: can't find Python.h header in", py_includes 1067 print "Install Python headers (package python-dev on Ubuntu and RedHat)" 1068 Exit(1) 1069 1070 for lib in py_libs: 1071 if not conf.CheckLib(lib): 1072 print "Error: can't find library %s required by python" % lib 1073 Exit(1) 1074 1075# On Solaris you need to use libsocket for socket ops 1076if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1077 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1078 print "Can't find library with socket calls (e.g. accept())" 1079 Exit(1) 1080 1081# Check for zlib. If the check passes, libz will be automatically 1082# added to the LIBS environment variable. 1083if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 1084 print 'Error: did not find needed zlib compression library '\ 1085 'and/or zlib.h header file.' 1086 print ' Please install zlib and try again.' 1087 Exit(1) 1088 1089# If we have the protobuf compiler, also make sure we have the 1090# development libraries. If the check passes, libprotobuf will be 1091# automatically added to the LIBS environment variable. After 1092# this, we can use the HAVE_PROTOBUF flag to determine if we have 1093# got both protoc and libprotobuf available. 1094main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 1095 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 1096 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 1097 1098# If we have the compiler but not the library, print another warning. 1099if main['PROTOC'] and not main['HAVE_PROTOBUF']: 1100 print termcap.Yellow + termcap.Bold + \ 1101 'Warning: did not find protocol buffer library and/or headers.\n' + \ 1102 ' Please install libprotobuf-dev for tracing support.' + \ 1103 termcap.Normal 1104 1105# Check for librt. 1106have_posix_clock = \ 1107 conf.CheckLibWithHeader(None, 'time.h', 'C', 1108 'clock_nanosleep(0,0,NULL,NULL);') or \ 1109 conf.CheckLibWithHeader('rt', 'time.h', 'C', 1110 'clock_nanosleep(0,0,NULL,NULL);') 1111 1112have_posix_timers = \ 1113 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 1114 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 1115 1116if not GetOption('without_tcmalloc'): 1117 if conf.CheckLib('tcmalloc'): 1118 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1119 elif conf.CheckLib('tcmalloc_minimal'): 1120 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1121 else: 1122 print termcap.Yellow + termcap.Bold + \ 1123 "You can get a 12% performance improvement by "\ 1124 "installing tcmalloc (libgoogle-perftools-dev package "\ 1125 "on Ubuntu or RedHat)." + termcap.Normal 1126 1127 1128# Detect back trace implementations. The last implementation in the 1129# list will be used by default. 1130backtrace_impls = [ "none" ] 1131 1132if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', 1133 'backtrace_symbols_fd((void*)0, 0, 0);'): 1134 backtrace_impls.append("glibc") 1135elif conf.CheckLibWithHeader('execinfo', 'execinfo.h', 'C', 1136 'backtrace_symbols_fd((void*)0, 0, 0);'): 1137 # NetBSD and FreeBSD need libexecinfo. 1138 backtrace_impls.append("glibc") 1139 main.Append(LIBS=['execinfo']) 1140 1141if backtrace_impls[-1] == "none": 1142 default_backtrace_impl = "none" 1143 print termcap.Yellow + termcap.Bold + \ 1144 "No suitable back trace implementation found." + \ 1145 termcap.Normal 1146 1147if not have_posix_clock: 1148 print "Can't find library for POSIX clocks." 1149 1150# Check for <fenv.h> (C99 FP environment control) 1151have_fenv = conf.CheckHeader('fenv.h', '<>') 1152if not have_fenv: 1153 print "Warning: Header file <fenv.h> not found." 1154 print " This host has no IEEE FP rounding mode control." 1155 1156# Check if we should enable KVM-based hardware virtualization. The API 1157# we rely on exists since version 2.6.36 of the kernel, but somehow 1158# the KVM_API_VERSION does not reflect the change. We test for one of 1159# the types as a fall back. 1160have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 1161if not have_kvm: 1162 print "Info: Compatible header file <linux/kvm.h> not found, " \ 1163 "disabling KVM support." 1164 1165# x86 needs support for xsave. We test for the structure here since we 1166# won't be able to run new tests by the time we know which ISA we're 1167# targeting. 1168have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 1169 '#include <linux/kvm.h>') != 0 1170 1171# Check if the requested target ISA is compatible with the host 1172def is_isa_kvm_compatible(isa): 1173 try: 1174 import platform 1175 host_isa = platform.machine() 1176 except: 1177 print "Warning: Failed to determine host ISA." 1178 return False 1179 1180 if not have_posix_timers: 1181 print "Warning: Can not enable KVM, host seems to lack support " \ 1182 "for POSIX timers" 1183 return False 1184 1185 if isa == "arm": 1186 return host_isa in ( "armv7l", "aarch64" ) 1187 elif isa == "x86": 1188 if host_isa != "x86_64": 1189 return False 1190 1191 if not have_kvm_xsave: 1192 print "KVM on x86 requires xsave support in kernel headers." 1193 return False 1194 1195 return True 1196 else: 1197 return False 1198 1199 1200# Check if the exclude_host attribute is available. We want this to 1201# get accurate instruction counts in KVM. 1202main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 1203 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 1204 1205 1206###################################################################### 1207# 1208# Finish the configuration 1209# 1210main = conf.Finish() 1211 1212###################################################################### 1213# 1214# Collect all non-global variables 1215# 1216 1217# Define the universe of supported ISAs 1218all_isa_list = [ ] 1219all_gpu_isa_list = [ ] 1220Export('all_isa_list') 1221Export('all_gpu_isa_list') 1222 1223class CpuModel(object): 1224 '''The CpuModel class encapsulates everything the ISA parser needs to 1225 know about a particular CPU model.''' 1226 1227 # Dict of available CPU model objects. Accessible as CpuModel.dict. 1228 dict = {} 1229 1230 # Constructor. Automatically adds models to CpuModel.dict. 1231 def __init__(self, name, default=False): 1232 self.name = name # name of model 1233 1234 # This cpu is enabled by default 1235 self.default = default 1236 1237 # Add self to dict 1238 if name in CpuModel.dict: 1239 raise AttributeError, "CpuModel '%s' already registered" % name 1240 CpuModel.dict[name] = self 1241 1242Export('CpuModel') 1243 1244# Sticky variables get saved in the variables file so they persist from 1245# one invocation to the next (unless overridden, in which case the new 1246# value becomes sticky). 1247sticky_vars = Variables(args=ARGUMENTS) 1248Export('sticky_vars') 1249 1250# Sticky variables that should be exported 1251export_vars = [] 1252Export('export_vars') 1253 1254# For Ruby 1255all_protocols = [] 1256Export('all_protocols') 1257protocol_dirs = [] 1258Export('protocol_dirs') 1259slicc_includes = [] 1260Export('slicc_includes') 1261 1262# Walk the tree and execute all SConsopts scripts that wil add to the 1263# above variables 1264if GetOption('verbose'): 1265 print "Reading SConsopts" 1266for bdir in [ base_dir ] + extras_dir_list: 1267 if not isdir(bdir): 1268 print "Error: directory '%s' does not exist" % bdir 1269 Exit(1) 1270 for root, dirs, files in os.walk(bdir): 1271 if 'SConsopts' in files: 1272 if GetOption('verbose'): 1273 print "Reading", joinpath(root, 'SConsopts') 1274 SConscript(joinpath(root, 'SConsopts')) 1275 1276all_isa_list.sort() 1277all_gpu_isa_list.sort() 1278 1279sticky_vars.AddVariables( 1280 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 1281 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 1282 ListVariable('CPU_MODELS', 'CPU models', 1283 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 1284 sorted(CpuModel.dict.keys())), 1285 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 1286 False), 1287 BoolVariable('SS_COMPATIBLE_FP', 1288 'Make floating-point results compatible with SimpleScalar', 1289 False), 1290 BoolVariable('USE_SSE2', 1291 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1292 False), 1293 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1294 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1295 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 1296 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm), 1297 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1298 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1299 all_protocols), 1300 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1301 backtrace_impls[-1], backtrace_impls) 1302 ) 1303 1304# These variables get exported to #defines in config/*.hh (see src/SConscript). 1305export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1306 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 1307 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST'] 1308 1309################################################### 1310# 1311# Define a SCons builder for configuration flag headers. 1312# 1313################################################### 1314 1315# This function generates a config header file that #defines the 1316# variable symbol to the current variable setting (0 or 1). The source 1317# operands are the name of the variable and a Value node containing the 1318# value of the variable. 1319def build_config_file(target, source, env): 1320 (variable, value) = [s.get_contents() for s in source] 1321 f = file(str(target[0]), 'w') 1322 print >> f, '#define', variable, value 1323 f.close() 1324 return None 1325 1326# Combine the two functions into a scons Action object. 1327config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1328 1329# The emitter munges the source & target node lists to reflect what 1330# we're really doing. 1331def config_emitter(target, source, env): 1332 # extract variable name from Builder arg 1333 variable = str(target[0]) 1334 # True target is config header file 1335 target = joinpath('config', variable.lower() + '.hh') 1336 val = env[variable] 1337 if isinstance(val, bool): 1338 # Force value to 0/1 1339 val = int(val) 1340 elif isinstance(val, str): 1341 val = '"' + val + '"' 1342 1343 # Sources are variable name & value (packaged in SCons Value nodes) 1344 return ([target], [Value(variable), Value(val)]) 1345 1346config_builder = Builder(emitter = config_emitter, action = config_action) 1347 1348main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1349 1350################################################### 1351# 1352# Builders for static and shared partially linked object files. 1353# 1354################################################### 1355 1356partial_static_builder = Builder(action=SCons.Defaults.LinkAction, 1357 src_suffix='$OBJSUFFIX', 1358 src_builder=['StaticObject', 'Object'], 1359 LINKFLAGS='$PLINKFLAGS', 1360 LIBS='') 1361 1362def partial_shared_emitter(target, source, env): 1363 for tgt in target: 1364 tgt.attributes.shared = 1 1365 return (target, source) 1366partial_shared_builder = Builder(action=SCons.Defaults.ShLinkAction, 1367 emitter=partial_shared_emitter, 1368 src_suffix='$SHOBJSUFFIX', 1369 src_builder='SharedObject', 1370 SHLINKFLAGS='$PSHLINKFLAGS', 1371 LIBS='') 1372 1373main.Append(BUILDERS = { 'PartialShared' : partial_shared_builder, 1374 'PartialStatic' : partial_static_builder }) 1375 1376# builds in ext are shared across all configs in the build root. 1377ext_dir = abspath(joinpath(str(main.root), 'ext')) 1378for root, dirs, files in os.walk(ext_dir): 1379 if 'SConscript' in files: 1380 build_dir = os.path.relpath(root, ext_dir) 1381 main.SConscript(joinpath(root, 'SConscript'), 1382 variant_dir=joinpath(build_root, build_dir)) 1383 1384################################################### 1385# 1386# This function is used to set up a directory with switching headers 1387# 1388################################################### 1389 1390main['ALL_ISA_LIST'] = all_isa_list 1391main['ALL_GPU_ISA_LIST'] = all_gpu_isa_list 1392all_isa_deps = {} 1393def make_switching_dir(dname, switch_headers, env): 1394 # Generate the header. target[0] is the full path of the output 1395 # header to generate. 'source' is a dummy variable, since we get the 1396 # list of ISAs from env['ALL_ISA_LIST']. 1397 def gen_switch_hdr(target, source, env): 1398 fname = str(target[0]) 1399 isa = env['TARGET_ISA'].lower() 1400 try: 1401 f = open(fname, 'w') 1402 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1403 f.close() 1404 except IOError: 1405 print "Failed to create %s" % fname 1406 raise 1407 1408 # Build SCons Action object. 'varlist' specifies env vars that this 1409 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1410 # should get re-executed. 1411 switch_hdr_action = MakeAction(gen_switch_hdr, 1412 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 1413 1414 # Instantiate actions for each header 1415 for hdr in switch_headers: 1416 env.Command(hdr, [], switch_hdr_action) 1417 1418 isa_target = Dir('.').up().name.lower().replace('_', '-') 1419 env['PHONY_BASE'] = '#'+isa_target 1420 all_isa_deps[isa_target] = None 1421 1422Export('make_switching_dir') 1423 1424def make_gpu_switching_dir(dname, switch_headers, env): 1425 # Generate the header. target[0] is the full path of the output 1426 # header to generate. 'source' is a dummy variable, since we get the 1427 # list of ISAs from env['ALL_ISA_LIST']. 1428 def gen_switch_hdr(target, source, env): 1429 fname = str(target[0]) 1430 1431 isa = env['TARGET_GPU_ISA'].lower() 1432 1433 try: 1434 f = open(fname, 'w') 1435 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1436 f.close() 1437 except IOError: 1438 print "Failed to create %s" % fname 1439 raise 1440 1441 # Build SCons Action object. 'varlist' specifies env vars that this 1442 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1443 # should get re-executed. 1444 switch_hdr_action = MakeAction(gen_switch_hdr, 1445 Transform("GENERATE"), varlist=['ALL_ISA_GPU_LIST']) 1446 1447 # Instantiate actions for each header 1448 for hdr in switch_headers: 1449 env.Command(hdr, [], switch_hdr_action) 1450 1451Export('make_gpu_switching_dir') 1452 1453# all-isas -> all-deps -> all-environs -> all_targets 1454main.Alias('#all-isas', []) 1455main.Alias('#all-deps', '#all-isas') 1456 1457# Dummy target to ensure all environments are created before telling 1458# SCons what to actually make (the command line arguments). We attach 1459# them to the dependence graph after the environments are complete. 1460ORIG_BUILD_TARGETS = list(BUILD_TARGETS) # force a copy; gets closure to work. 1461def environsComplete(target, source, env): 1462 for t in ORIG_BUILD_TARGETS: 1463 main.Depends('#all-targets', t) 1464 1465# Each build/* switching_dir attaches its *-environs target to #all-environs. 1466main.Append(BUILDERS = {'CompleteEnvirons' : 1467 Builder(action=MakeAction(environsComplete, None))}) 1468main.CompleteEnvirons('#all-environs', []) 1469 1470def doNothing(**ignored): pass 1471main.Append(BUILDERS = {'Dummy': Builder(action=MakeAction(doNothing, None))}) 1472 1473# The final target to which all the original targets ultimately get attached. 1474main.Dummy('#all-targets', '#all-environs') 1475BUILD_TARGETS[:] = ['#all-targets'] 1476 1477################################################### 1478# 1479# Define build environments for selected configurations. 1480# 1481################################################### 1482 1483for variant_path in variant_paths: 1484 if not GetOption('silent'): 1485 print "Building in", variant_path 1486 1487 # Make a copy of the build-root environment to use for this config. 1488 env = main.Clone() 1489 env['BUILDDIR'] = variant_path 1490 1491 # variant_dir is the tail component of build path, and is used to 1492 # determine the build parameters (e.g., 'ALPHA_SE') 1493 (build_root, variant_dir) = splitpath(variant_path) 1494 1495 # Set env variables according to the build directory config. 1496 sticky_vars.files = [] 1497 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1498 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1499 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1500 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1501 if isfile(current_vars_file): 1502 sticky_vars.files.append(current_vars_file) 1503 if not GetOption('silent'): 1504 print "Using saved variables file %s" % current_vars_file 1505 else: 1506 # Build dir-specific variables file doesn't exist. 1507 1508 # Make sure the directory is there so we can create it later 1509 opt_dir = dirname(current_vars_file) 1510 if not isdir(opt_dir): 1511 mkdir(opt_dir) 1512 1513 # Get default build variables from source tree. Variables are 1514 # normally determined by name of $VARIANT_DIR, but can be 1515 # overridden by '--default=' arg on command line. 1516 default = GetOption('default') 1517 opts_dir = joinpath(main.root.abspath, 'build_opts') 1518 if default: 1519 default_vars_files = [joinpath(build_root, 'variables', default), 1520 joinpath(opts_dir, default)] 1521 else: 1522 default_vars_files = [joinpath(opts_dir, variant_dir)] 1523 existing_files = filter(isfile, default_vars_files) 1524 if existing_files: 1525 default_vars_file = existing_files[0] 1526 sticky_vars.files.append(default_vars_file) 1527 print "Variables file %s not found,\n using defaults in %s" \ 1528 % (current_vars_file, default_vars_file) 1529 else: 1530 print "Error: cannot find variables file %s or " \ 1531 "default file(s) %s" \ 1532 % (current_vars_file, ' or '.join(default_vars_files)) 1533 Exit(1) 1534 1535 # Apply current variable settings to env 1536 sticky_vars.Update(env) 1537 1538 help_texts["local_vars"] += \ 1539 "Build variables for %s:\n" % variant_dir \ 1540 + sticky_vars.GenerateHelpText(env) 1541 1542 # Process variable settings. 1543 1544 if not have_fenv and env['USE_FENV']: 1545 print "Warning: <fenv.h> not available; " \ 1546 "forcing USE_FENV to False in", variant_dir + "." 1547 env['USE_FENV'] = False 1548 1549 if not env['USE_FENV']: 1550 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1551 print " FP results may deviate slightly from other platforms." 1552 1553 if env['EFENCE']: 1554 env.Append(LIBS=['efence']) 1555 1556 if env['USE_KVM']: 1557 if not have_kvm: 1558 print "Warning: Can not enable KVM, host seems to lack KVM support" 1559 env['USE_KVM'] = False 1560 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1561 print "Info: KVM support disabled due to unsupported host and " \ 1562 "target ISA combination" 1563 env['USE_KVM'] = False 1564 1565 if env['BUILD_GPU']: 1566 env.Append(CPPDEFINES=['BUILD_GPU']) 1567 1568 # Warn about missing optional functionality 1569 if env['USE_KVM']: 1570 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1571 print "Warning: perf_event headers lack support for the " \ 1572 "exclude_host attribute. KVM instruction counts will " \ 1573 "be inaccurate." 1574 1575 # Save sticky variable settings back to current variables file 1576 sticky_vars.Save(current_vars_file, env) 1577 1578 if env['USE_SSE2']: 1579 env.Append(CCFLAGS=['-msse2']) 1580 1581 # The src/SConscript file sets up the build rules in 'env' according 1582 # to the configured variables. It returns a list of environments, 1583 # one for each variant build (debug, opt, etc.) 1584 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env') 1585 1586def pairwise(iterable): 1587 "s -> (s0,s1), (s1,s2), (s2, s3), ..." 1588 a, b = itertools.tee(iterable) 1589 b.next() 1590 return itertools.izip(a, b) 1591 1592# Create false dependencies so SCons will parse ISAs, establish 1593# dependencies, and setup the build Environments serially. Either 1594# SCons (likely) and/or our SConscripts (possibly) cannot cope with -j 1595# greater than 1. It appears to be standard race condition stuff; it 1596# doesn't always fail, but usually, and the behaviors are different. 1597# Every time I tried to remove this, builds would fail in some 1598# creative new way. So, don't do that. You'll want to, though, because 1599# tests/SConscript takes a long time to make its Environments. 1600for t1, t2 in pairwise(sorted(all_isa_deps.iterkeys())): 1601 main.Depends('#%s-deps' % t2, '#%s-deps' % t1) 1602 main.Depends('#%s-environs' % t2, '#%s-environs' % t1) 1603 1604# base help text 1605Help(''' 1606Usage: scons [scons options] [build variables] [target(s)] 1607 1608Extra scons options: 1609%(options)s 1610 1611Global build variables: 1612%(global_vars)s 1613 1614%(local_vars)s 1615''' % help_texts) 1616