SConstruct revision 11798
1# -*- mode:python -*- 2 3# Copyright (c) 2013, 2015, 2016 ARM Limited 4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81# Check for recent-enough Python and SCons versions. 82try: 83 # Really old versions of scons only take two options for the 84 # function, so check once without the revision and once with the 85 # revision, the first instance will fail for stuff other than 86 # 0.98, and the second will fail for 0.98.0 87 EnsureSConsVersion(0, 98) 88 EnsureSConsVersion(0, 98, 1) 89except SystemExit, e: 90 print """ 91For more details, see: 92 http://gem5.org/Dependencies 93""" 94 raise 95 96# We ensure the python version early because because python-config 97# requires python 2.5 98try: 99 EnsurePythonVersion(2, 5) 100except SystemExit, e: 101 print """ 102You can use a non-default installation of the Python interpreter by 103rearranging your PATH so that scons finds the non-default 'python' and 104'python-config' first. 105 106For more details, see: 107 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 108""" 109 raise 110 111# Global Python includes 112import itertools 113import os 114import re 115import shutil 116import subprocess 117import sys 118 119from os import mkdir, environ 120from os.path import abspath, basename, dirname, expanduser, normpath 121from os.path import exists, isdir, isfile 122from os.path import join as joinpath, split as splitpath 123 124# SCons includes 125import SCons 126import SCons.Node 127 128extra_python_paths = [ 129 Dir('src/python').srcnode().abspath, # gem5 includes 130 Dir('ext/ply').srcnode().abspath, # ply is used by several files 131 ] 132 133sys.path[1:1] = extra_python_paths 134 135from m5.util import compareVersions, readCommand 136from m5.util.terminal import get_termcap 137 138help_texts = { 139 "options" : "", 140 "global_vars" : "", 141 "local_vars" : "" 142} 143 144Export("help_texts") 145 146 147# There's a bug in scons in that (1) by default, the help texts from 148# AddOption() are supposed to be displayed when you type 'scons -h' 149# and (2) you can override the help displayed by 'scons -h' using the 150# Help() function, but these two features are incompatible: once 151# you've overridden the help text using Help(), there's no way to get 152# at the help texts from AddOptions. See: 153# http://scons.tigris.org/issues/show_bug.cgi?id=2356 154# http://scons.tigris.org/issues/show_bug.cgi?id=2611 155# This hack lets us extract the help text from AddOptions and 156# re-inject it via Help(). Ideally someday this bug will be fixed and 157# we can just use AddOption directly. 158def AddLocalOption(*args, **kwargs): 159 col_width = 30 160 161 help = " " + ", ".join(args) 162 if "help" in kwargs: 163 length = len(help) 164 if length >= col_width: 165 help += "\n" + " " * col_width 166 else: 167 help += " " * (col_width - length) 168 help += kwargs["help"] 169 help_texts["options"] += help + "\n" 170 171 AddOption(*args, **kwargs) 172 173AddLocalOption('--colors', dest='use_colors', action='store_true', 174 help="Add color to abbreviated scons output") 175AddLocalOption('--no-colors', dest='use_colors', action='store_false', 176 help="Don't add color to abbreviated scons output") 177AddLocalOption('--with-cxx-config', dest='with_cxx_config', 178 action='store_true', 179 help="Build with support for C++-based configuration") 180AddLocalOption('--default', dest='default', type='string', action='store', 181 help='Override which build_opts file to use for defaults') 182AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 183 help='Disable style checking hooks') 184AddLocalOption('--no-lto', dest='no_lto', action='store_true', 185 help='Disable Link-Time Optimization for fast') 186AddLocalOption('--update-ref', dest='update_ref', action='store_true', 187 help='Update test reference outputs') 188AddLocalOption('--verbose', dest='verbose', action='store_true', 189 help='Print full tool command lines') 190AddLocalOption('--without-python', dest='without_python', 191 action='store_true', 192 help='Build without Python configuration support') 193AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 194 action='store_true', 195 help='Disable linking against tcmalloc') 196AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 197 help='Build with Undefined Behavior Sanitizer if available') 198AddLocalOption('--with-asan', dest='with_asan', action='store_true', 199 help='Build with Address Sanitizer if available') 200 201termcap = get_termcap(GetOption('use_colors')) 202 203######################################################################## 204# 205# Set up the main build environment. 206# 207######################################################################## 208 209# export TERM so that clang reports errors in color 210use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 211 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC', 212 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ]) 213 214use_prefixes = [ 215 "ASAN_", # address sanitizer symbolizer path and settings 216 "CCACHE_", # ccache (caching compiler wrapper) configuration 217 "CCC_", # clang static analyzer configuration 218 "DISTCC_", # distcc (distributed compiler wrapper) configuration 219 "INCLUDE_SERVER_", # distcc pump server settings 220 "M5", # M5 configuration (e.g., path to kernels) 221 ] 222 223use_env = {} 224for key,val in sorted(os.environ.iteritems()): 225 if key in use_vars or \ 226 any([key.startswith(prefix) for prefix in use_prefixes]): 227 use_env[key] = val 228 229# Tell scons to avoid implicit command dependencies to avoid issues 230# with the param wrappes being compiled twice (see 231# http://scons.tigris.org/issues/show_bug.cgi?id=2811) 232main = Environment(ENV=use_env, IMPLICIT_COMMAND_DEPENDENCIES=0) 233main.Decider('MD5-timestamp') 234main.root = Dir(".") # The current directory (where this file lives). 235main.srcdir = Dir("src") # The source directory 236 237main_dict_keys = main.Dictionary().keys() 238 239# Check that we have a C/C++ compiler 240if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 241 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)" 242 Exit(1) 243 244# Check that swig is present 245if not 'SWIG' in main_dict_keys: 246 print "swig is not installed (package swig on Ubuntu and RedHat)" 247 Exit(1) 248 249# add useful python code PYTHONPATH so it can be used by subprocesses 250# as well 251main.AppendENVPath('PYTHONPATH', extra_python_paths) 252 253######################################################################## 254# 255# Mercurial Stuff. 256# 257# If the gem5 directory is a mercurial repository, we should do some 258# extra things. 259# 260######################################################################## 261 262hgdir = main.root.Dir(".hg") 263 264 265style_message = """ 266You're missing the gem5 style hook, which automatically checks your code 267against the gem5 style rules on %s. 268This script will now install the hook in your %s. 269Press enter to continue, or ctrl-c to abort: """ 270 271mercurial_style_message = style_message % ("hg commit and qrefresh commands", 272 ".hg/hgrc file") 273git_style_message = style_message % ("'git commit'", 274 ".git/hooks/ directory") 275 276mercurial_style_upgrade_message = """ 277Your Mercurial style hooks are not up-to-date. This script will now 278try to automatically update them. A backup of your hgrc will be saved 279in .hg/hgrc.old. 280Press enter to continue, or ctrl-c to abort: """ 281 282mercurial_style_hook = """ 283# The following lines were automatically added by gem5/SConstruct 284# to provide the gem5 style-checking hooks 285[extensions] 286hgstyle = %s/util/hgstyle.py 287 288[hooks] 289pretxncommit.style = python:hgstyle.check_style 290pre-qrefresh.style = python:hgstyle.check_style 291# End of SConstruct additions 292 293""" % (main.root.abspath) 294 295mercurial_lib_not_found = """ 296Mercurial libraries cannot be found, ignoring style hook. If 297you are a gem5 developer, please fix this and run the style 298hook. It is important. 299""" 300 301# Check for style hook and prompt for installation if it's not there. 302# Skip this if --ignore-style was specified, there's no interactive 303# terminal to prompt, or no recognized revision control system can be 304# found. 305ignore_style = GetOption('ignore_style') or not sys.stdin.isatty() 306 307# Try wire up Mercurial to the style hooks 308if not ignore_style and hgdir.exists(): 309 style_hook = True 310 style_hooks = tuple() 311 hgrc = hgdir.File('hgrc') 312 hgrc_old = hgdir.File('hgrc.old') 313 try: 314 from mercurial import ui 315 ui = ui.ui() 316 ui.readconfig(hgrc.abspath) 317 style_hooks = (ui.config('hooks', 'pretxncommit.style', None), 318 ui.config('hooks', 'pre-qrefresh.style', None)) 319 style_hook = all(style_hooks) 320 style_extension = ui.config('extensions', 'style', None) 321 except ImportError: 322 print mercurial_lib_not_found 323 324 if "python:style.check_style" in style_hooks: 325 # Try to upgrade the style hooks 326 print mercurial_style_upgrade_message 327 # continue unless user does ctrl-c/ctrl-d etc. 328 try: 329 raw_input() 330 except: 331 print "Input exception, exiting scons.\n" 332 sys.exit(1) 333 shutil.copyfile(hgrc.abspath, hgrc_old.abspath) 334 re_style_hook = re.compile(r"^([^=#]+)\.style\s*=\s*([^#\s]+).*") 335 re_style_extension = re.compile("style\s*=\s*([^#\s]+).*") 336 old, new = open(hgrc_old.abspath, 'r'), open(hgrc.abspath, 'w') 337 for l in old: 338 m_hook = re_style_hook.match(l) 339 m_ext = re_style_extension.match(l) 340 if m_hook: 341 hook, check = m_hook.groups() 342 if check != "python:style.check_style": 343 print "Warning: %s.style is using a non-default " \ 344 "checker: %s" % (hook, check) 345 if hook not in ("pretxncommit", "pre-qrefresh"): 346 print "Warning: Updating unknown style hook: %s" % hook 347 348 l = "%s.style = python:hgstyle.check_style\n" % hook 349 elif m_ext and m_ext.group(1) == style_extension: 350 l = "hgstyle = %s/util/hgstyle.py\n" % main.root.abspath 351 352 new.write(l) 353 elif not style_hook: 354 print mercurial_style_message, 355 # continue unless user does ctrl-c/ctrl-d etc. 356 try: 357 raw_input() 358 except: 359 print "Input exception, exiting scons.\n" 360 sys.exit(1) 361 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 362 print "Adding style hook to", hgrc_path, "\n" 363 try: 364 with open(hgrc_path, 'a') as f: 365 f.write(mercurial_style_hook) 366 except: 367 print "Error updating", hgrc_path 368 sys.exit(1) 369 370def install_git_style_hooks(): 371 try: 372 gitdir = Dir(readCommand( 373 ["git", "rev-parse", "--git-dir"]).strip("\n")) 374 except Exception, e: 375 print "Warning: Failed to find git repo directory: %s" % e 376 return 377 378 git_hooks = gitdir.Dir("hooks") 379 git_pre_commit_hook = git_hooks.File("pre-commit") 380 git_style_script = File("util/git-pre-commit.py") 381 382 if git_pre_commit_hook.exists(): 383 return 384 385 print git_style_message, 386 try: 387 raw_input() 388 except: 389 print "Input exception, exiting scons.\n" 390 sys.exit(1) 391 392 if not git_hooks.exists(): 393 mkdir(git_hooks.get_abspath()) 394 395 # Use a relative symlink if the hooks live in the source directory 396 if git_pre_commit_hook.is_under(main.root): 397 script_path = os.path.relpath( 398 git_style_script.get_abspath(), 399 git_pre_commit_hook.Dir(".").get_abspath()) 400 else: 401 script_path = git_style_script.get_abspath() 402 403 try: 404 os.symlink(script_path, git_pre_commit_hook.get_abspath()) 405 except: 406 print "Error updating git pre-commit hook" 407 raise 408 409# Try to wire up git to the style hooks 410if not ignore_style and main.root.Entry(".git").exists(): 411 install_git_style_hooks() 412 413################################################### 414# 415# Figure out which configurations to set up based on the path(s) of 416# the target(s). 417# 418################################################### 419 420# Find default configuration & binary. 421Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 422 423# helper function: find last occurrence of element in list 424def rfind(l, elt, offs = -1): 425 for i in range(len(l)+offs, 0, -1): 426 if l[i] == elt: 427 return i 428 raise ValueError, "element not found" 429 430# Take a list of paths (or SCons Nodes) and return a list with all 431# paths made absolute and ~-expanded. Paths will be interpreted 432# relative to the launch directory unless a different root is provided 433def makePathListAbsolute(path_list, root=GetLaunchDir()): 434 return [abspath(joinpath(root, expanduser(str(p)))) 435 for p in path_list] 436 437# Each target must have 'build' in the interior of the path; the 438# directory below this will determine the build parameters. For 439# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 440# recognize that ALPHA_SE specifies the configuration because it 441# follow 'build' in the build path. 442 443# The funky assignment to "[:]" is needed to replace the list contents 444# in place rather than reassign the symbol to a new list, which 445# doesn't work (obviously!). 446BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 447 448# Generate a list of the unique build roots and configs that the 449# collected targets reference. 450variant_paths = [] 451build_root = None 452for t in BUILD_TARGETS: 453 path_dirs = t.split('/') 454 try: 455 build_top = rfind(path_dirs, 'build', -2) 456 except: 457 print "Error: no non-leaf 'build' dir found on target path", t 458 Exit(1) 459 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 460 if not build_root: 461 build_root = this_build_root 462 else: 463 if this_build_root != build_root: 464 print "Error: build targets not under same build root\n"\ 465 " %s\n %s" % (build_root, this_build_root) 466 Exit(1) 467 variant_path = joinpath('/',*path_dirs[:build_top+2]) 468 if variant_path not in variant_paths: 469 variant_paths.append(variant_path) 470 471# Make sure build_root exists (might not if this is the first build there) 472if not isdir(build_root): 473 mkdir(build_root) 474main['BUILDROOT'] = build_root 475 476Export('main') 477 478main.SConsignFile(joinpath(build_root, "sconsign")) 479 480# Default duplicate option is to use hard links, but this messes up 481# when you use emacs to edit a file in the target dir, as emacs moves 482# file to file~ then copies to file, breaking the link. Symbolic 483# (soft) links work better. 484main.SetOption('duplicate', 'soft-copy') 485 486# 487# Set up global sticky variables... these are common to an entire build 488# tree (not specific to a particular build like ALPHA_SE) 489# 490 491global_vars_file = joinpath(build_root, 'variables.global') 492 493global_vars = Variables(global_vars_file, args=ARGUMENTS) 494 495global_vars.AddVariables( 496 ('CC', 'C compiler', environ.get('CC', main['CC'])), 497 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 498 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 499 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 500 ('BATCH', 'Use batch pool for build and tests', False), 501 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 502 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 503 ('EXTRAS', 'Add extra directories to the compilation', '') 504 ) 505 506# Update main environment with values from ARGUMENTS & global_vars_file 507global_vars.Update(main) 508help_texts["global_vars"] += global_vars.GenerateHelpText(main) 509 510# Save sticky variable settings back to current variables file 511global_vars.Save(global_vars_file, main) 512 513# Parse EXTRAS variable to build list of all directories where we're 514# look for sources etc. This list is exported as extras_dir_list. 515base_dir = main.srcdir.abspath 516if main['EXTRAS']: 517 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 518else: 519 extras_dir_list = [] 520 521Export('base_dir') 522Export('extras_dir_list') 523 524# the ext directory should be on the #includes path 525main.Append(CPPPATH=[Dir('ext')]) 526 527def strip_build_path(path, env): 528 path = str(path) 529 variant_base = env['BUILDROOT'] + os.path.sep 530 if path.startswith(variant_base): 531 path = path[len(variant_base):] 532 elif path.startswith('build/'): 533 path = path[6:] 534 return path 535 536# Generate a string of the form: 537# common/path/prefix/src1, src2 -> tgt1, tgt2 538# to print while building. 539class Transform(object): 540 # all specific color settings should be here and nowhere else 541 tool_color = termcap.Normal 542 pfx_color = termcap.Yellow 543 srcs_color = termcap.Yellow + termcap.Bold 544 arrow_color = termcap.Blue + termcap.Bold 545 tgts_color = termcap.Yellow + termcap.Bold 546 547 def __init__(self, tool, max_sources=99): 548 self.format = self.tool_color + (" [%8s] " % tool) \ 549 + self.pfx_color + "%s" \ 550 + self.srcs_color + "%s" \ 551 + self.arrow_color + " -> " \ 552 + self.tgts_color + "%s" \ 553 + termcap.Normal 554 self.max_sources = max_sources 555 556 def __call__(self, target, source, env, for_signature=None): 557 # truncate source list according to max_sources param 558 source = source[0:self.max_sources] 559 def strip(f): 560 return strip_build_path(str(f), env) 561 if len(source) > 0: 562 srcs = map(strip, source) 563 else: 564 srcs = [''] 565 tgts = map(strip, target) 566 # surprisingly, os.path.commonprefix is a dumb char-by-char string 567 # operation that has nothing to do with paths. 568 com_pfx = os.path.commonprefix(srcs + tgts) 569 com_pfx_len = len(com_pfx) 570 if com_pfx: 571 # do some cleanup and sanity checking on common prefix 572 if com_pfx[-1] == ".": 573 # prefix matches all but file extension: ok 574 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 575 com_pfx = com_pfx[0:-1] 576 elif com_pfx[-1] == "/": 577 # common prefix is directory path: OK 578 pass 579 else: 580 src0_len = len(srcs[0]) 581 tgt0_len = len(tgts[0]) 582 if src0_len == com_pfx_len: 583 # source is a substring of target, OK 584 pass 585 elif tgt0_len == com_pfx_len: 586 # target is a substring of source, need to back up to 587 # avoid empty string on RHS of arrow 588 sep_idx = com_pfx.rfind(".") 589 if sep_idx != -1: 590 com_pfx = com_pfx[0:sep_idx] 591 else: 592 com_pfx = '' 593 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 594 # still splitting at file extension: ok 595 pass 596 else: 597 # probably a fluke; ignore it 598 com_pfx = '' 599 # recalculate length in case com_pfx was modified 600 com_pfx_len = len(com_pfx) 601 def fmt(files): 602 f = map(lambda s: s[com_pfx_len:], files) 603 return ', '.join(f) 604 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 605 606Export('Transform') 607 608# enable the regression script to use the termcap 609main['TERMCAP'] = termcap 610 611if GetOption('verbose'): 612 def MakeAction(action, string, *args, **kwargs): 613 return Action(action, *args, **kwargs) 614else: 615 MakeAction = Action 616 main['CCCOMSTR'] = Transform("CC") 617 main['CXXCOMSTR'] = Transform("CXX") 618 main['ASCOMSTR'] = Transform("AS") 619 main['SWIGCOMSTR'] = Transform("SWIG") 620 main['ARCOMSTR'] = Transform("AR", 0) 621 main['LINKCOMSTR'] = Transform("LINK", 0) 622 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 623 main['M4COMSTR'] = Transform("M4") 624 main['SHCCCOMSTR'] = Transform("SHCC") 625 main['SHCXXCOMSTR'] = Transform("SHCXX") 626Export('MakeAction') 627 628# Initialize the Link-Time Optimization (LTO) flags 629main['LTO_CCFLAGS'] = [] 630main['LTO_LDFLAGS'] = [] 631 632# According to the readme, tcmalloc works best if the compiler doesn't 633# assume that we're using the builtin malloc and friends. These flags 634# are compiler-specific, so we need to set them after we detect which 635# compiler we're using. 636main['TCMALLOC_CCFLAGS'] = [] 637 638CXX_version = readCommand([main['CXX'],'--version'], exception=False) 639CXX_V = readCommand([main['CXX'],'-V'], exception=False) 640 641main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 642main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 643if main['GCC'] + main['CLANG'] > 1: 644 print 'Error: How can we have two at the same time?' 645 Exit(1) 646 647# Set up default C++ compiler flags 648if main['GCC'] or main['CLANG']: 649 # As gcc and clang share many flags, do the common parts here 650 main.Append(CCFLAGS=['-pipe']) 651 main.Append(CCFLAGS=['-fno-strict-aliasing']) 652 # Enable -Wall and -Wextra and then disable the few warnings that 653 # we consistently violate 654 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 655 '-Wno-sign-compare', '-Wno-unused-parameter']) 656 # We always compile using C++11 657 main.Append(CXXFLAGS=['-std=c++11']) 658else: 659 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 660 print "Don't know what compiler options to use for your compiler." 661 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 662 print termcap.Yellow + ' version:' + termcap.Normal, 663 if not CXX_version: 664 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 665 termcap.Normal 666 else: 667 print CXX_version.replace('\n', '<nl>') 668 print " If you're trying to use a compiler other than GCC" 669 print " or clang, there appears to be something wrong with your" 670 print " environment." 671 print " " 672 print " If you are trying to use a compiler other than those listed" 673 print " above you will need to ease fix SConstruct and " 674 print " src/SConscript to support that compiler." 675 Exit(1) 676 677if main['GCC']: 678 # Check for a supported version of gcc. >= 4.8 is chosen for its 679 # level of c++11 support. See 680 # http://gcc.gnu.org/projects/cxx0x.html for details. 681 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 682 if compareVersions(gcc_version, "4.8") < 0: 683 print 'Error: gcc version 4.8 or newer required.' 684 print ' Installed version:', gcc_version 685 Exit(1) 686 687 main['GCC_VERSION'] = gcc_version 688 689 # gcc from version 4.8 and above generates "rep; ret" instructions 690 # to avoid performance penalties on certain AMD chips. Older 691 # assemblers detect this as an error, "Error: expecting string 692 # instruction after `rep'" 693 as_version_raw = readCommand([main['AS'], '-v', '/dev/null'], 694 exception=False).split() 695 696 # version strings may contain extra distro-specific 697 # qualifiers, so play it safe and keep only what comes before 698 # the first hyphen 699 as_version = as_version_raw[-1].split('-')[0] if as_version_raw else None 700 701 if not as_version or compareVersions(as_version, "2.23") < 0: 702 print termcap.Yellow + termcap.Bold + \ 703 'Warning: This combination of gcc and binutils have' + \ 704 ' known incompatibilities.\n' + \ 705 ' If you encounter build problems, please update ' + \ 706 'binutils to 2.23.' + \ 707 termcap.Normal 708 709 # Make sure we warn if the user has requested to compile with the 710 # Undefined Benahvior Sanitizer and this version of gcc does not 711 # support it. 712 if GetOption('with_ubsan') and \ 713 compareVersions(gcc_version, '4.9') < 0: 714 print termcap.Yellow + termcap.Bold + \ 715 'Warning: UBSan is only supported using gcc 4.9 and later.' + \ 716 termcap.Normal 717 718 # Add the appropriate Link-Time Optimization (LTO) flags 719 # unless LTO is explicitly turned off. Note that these flags 720 # are only used by the fast target. 721 if not GetOption('no_lto'): 722 # Pass the LTO flag when compiling to produce GIMPLE 723 # output, we merely create the flags here and only append 724 # them later 725 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 726 727 # Use the same amount of jobs for LTO as we are running 728 # scons with 729 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 730 731 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 732 '-fno-builtin-realloc', '-fno-builtin-free']) 733 734 # add option to check for undeclared overrides 735 if compareVersions(gcc_version, "5.0") > 0: 736 main.Append(CCFLAGS=['-Wno-error=suggest-override']) 737 738elif main['CLANG']: 739 # Check for a supported version of clang, >= 3.1 is needed to 740 # support similar features as gcc 4.8. See 741 # http://clang.llvm.org/cxx_status.html for details 742 clang_version_re = re.compile(".* version (\d+\.\d+)") 743 clang_version_match = clang_version_re.search(CXX_version) 744 if (clang_version_match): 745 clang_version = clang_version_match.groups()[0] 746 if compareVersions(clang_version, "3.1") < 0: 747 print 'Error: clang version 3.1 or newer required.' 748 print ' Installed version:', clang_version 749 Exit(1) 750 else: 751 print 'Error: Unable to determine clang version.' 752 Exit(1) 753 754 # clang has a few additional warnings that we disable, extraneous 755 # parantheses are allowed due to Ruby's printing of the AST, 756 # finally self assignments are allowed as the generated CPU code 757 # is relying on this 758 main.Append(CCFLAGS=['-Wno-parentheses', 759 '-Wno-self-assign', 760 # Some versions of libstdc++ (4.8?) seem to 761 # use struct hash and class hash 762 # interchangeably. 763 '-Wno-mismatched-tags', 764 ]) 765 766 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 767 768 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 769 # opposed to libstdc++, as the later is dated. 770 if sys.platform == "darwin": 771 main.Append(CXXFLAGS=['-stdlib=libc++']) 772 main.Append(LIBS=['c++']) 773 774else: 775 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 776 print "Don't know what compiler options to use for your compiler." 777 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 778 print termcap.Yellow + ' version:' + termcap.Normal, 779 if not CXX_version: 780 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 781 termcap.Normal 782 else: 783 print CXX_version.replace('\n', '<nl>') 784 print " If you're trying to use a compiler other than GCC" 785 print " or clang, there appears to be something wrong with your" 786 print " environment." 787 print " " 788 print " If you are trying to use a compiler other than those listed" 789 print " above you will need to ease fix SConstruct and " 790 print " src/SConscript to support that compiler." 791 Exit(1) 792 793# Set up common yacc/bison flags (needed for Ruby) 794main['YACCFLAGS'] = '-d' 795main['YACCHXXFILESUFFIX'] = '.hh' 796 797# Do this after we save setting back, or else we'll tack on an 798# extra 'qdo' every time we run scons. 799if main['BATCH']: 800 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 801 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 802 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 803 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 804 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 805 806if sys.platform == 'cygwin': 807 # cygwin has some header file issues... 808 main.Append(CCFLAGS=["-Wno-uninitialized"]) 809 810# Check for the protobuf compiler 811protoc_version = readCommand([main['PROTOC'], '--version'], 812 exception='').split() 813 814# First two words should be "libprotoc x.y.z" 815if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 816 print termcap.Yellow + termcap.Bold + \ 817 'Warning: Protocol buffer compiler (protoc) not found.\n' + \ 818 ' Please install protobuf-compiler for tracing support.' + \ 819 termcap.Normal 820 main['PROTOC'] = False 821else: 822 # Based on the availability of the compress stream wrappers, 823 # require 2.1.0 824 min_protoc_version = '2.1.0' 825 if compareVersions(protoc_version[1], min_protoc_version) < 0: 826 print termcap.Yellow + termcap.Bold + \ 827 'Warning: protoc version', min_protoc_version, \ 828 'or newer required.\n' + \ 829 ' Installed version:', protoc_version[1], \ 830 termcap.Normal 831 main['PROTOC'] = False 832 else: 833 # Attempt to determine the appropriate include path and 834 # library path using pkg-config, that means we also need to 835 # check for pkg-config. Note that it is possible to use 836 # protobuf without the involvement of pkg-config. Later on we 837 # check go a library config check and at that point the test 838 # will fail if libprotobuf cannot be found. 839 if readCommand(['pkg-config', '--version'], exception=''): 840 try: 841 # Attempt to establish what linking flags to add for protobuf 842 # using pkg-config 843 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 844 except: 845 print termcap.Yellow + termcap.Bold + \ 846 'Warning: pkg-config could not get protobuf flags.' + \ 847 termcap.Normal 848 849# Check for SWIG 850if not main.has_key('SWIG'): 851 print 'Error: SWIG utility not found.' 852 print ' Please install (see http://www.swig.org) and retry.' 853 Exit(1) 854 855# Check for appropriate SWIG version 856swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 857# First 3 words should be "SWIG Version x.y.z" 858if len(swig_version) < 3 or \ 859 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 860 print 'Error determining SWIG version.' 861 Exit(1) 862 863min_swig_version = '2.0.4' 864if compareVersions(swig_version[2], min_swig_version) < 0: 865 print 'Error: SWIG version', min_swig_version, 'or newer required.' 866 print ' Installed version:', swig_version[2] 867 Exit(1) 868 869# Check for known incompatibilities. The standard library shipped with 870# gcc >= 4.9 does not play well with swig versions prior to 3.0 871if main['GCC'] and compareVersions(gcc_version, '4.9') >= 0 and \ 872 compareVersions(swig_version[2], '3.0') < 0: 873 print termcap.Yellow + termcap.Bold + \ 874 'Warning: This combination of gcc and swig have' + \ 875 ' known incompatibilities.\n' + \ 876 ' If you encounter build problems, please update ' + \ 877 'swig to 3.0 or later.' + \ 878 termcap.Normal 879 880# Set up SWIG flags & scanner 881swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 882main.Append(SWIGFLAGS=swig_flags) 883 884# Check for 'timeout' from GNU coreutils. If present, regressions will 885# be run with a time limit. We require version 8.13 since we rely on 886# support for the '--foreground' option. 887timeout_lines = readCommand(['timeout', '--version'], 888 exception='').splitlines() 889# Get the first line and tokenize it 890timeout_version = timeout_lines[0].split() if timeout_lines else [] 891main['TIMEOUT'] = timeout_version and \ 892 compareVersions(timeout_version[-1], '8.13') >= 0 893 894# filter out all existing swig scanners, they mess up the dependency 895# stuff for some reason 896scanners = [] 897for scanner in main['SCANNERS']: 898 skeys = scanner.skeys 899 if skeys == '.i': 900 continue 901 902 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 903 continue 904 905 scanners.append(scanner) 906 907# add the new swig scanner that we like better 908from SCons.Scanner import ClassicCPP as CPPScanner 909swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 910scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 911 912# replace the scanners list that has what we want 913main['SCANNERS'] = scanners 914 915# Add a custom Check function to test for structure members. 916def CheckMember(context, include, decl, member, include_quotes="<>"): 917 context.Message("Checking for member %s in %s..." % 918 (member, decl)) 919 text = """ 920#include %(header)s 921int main(){ 922 %(decl)s test; 923 (void)test.%(member)s; 924 return 0; 925}; 926""" % { "header" : include_quotes[0] + include + include_quotes[1], 927 "decl" : decl, 928 "member" : member, 929 } 930 931 ret = context.TryCompile(text, extension=".cc") 932 context.Result(ret) 933 return ret 934 935# Platform-specific configuration. Note again that we assume that all 936# builds under a given build root run on the same host platform. 937conf = Configure(main, 938 conf_dir = joinpath(build_root, '.scons_config'), 939 log_file = joinpath(build_root, 'scons_config.log'), 940 custom_tests = { 941 'CheckMember' : CheckMember, 942 }) 943 944# Check if we should compile a 64 bit binary on Mac OS X/Darwin 945try: 946 import platform 947 uname = platform.uname() 948 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 949 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 950 main.Append(CCFLAGS=['-arch', 'x86_64']) 951 main.Append(CFLAGS=['-arch', 'x86_64']) 952 main.Append(LINKFLAGS=['-arch', 'x86_64']) 953 main.Append(ASFLAGS=['-arch', 'x86_64']) 954except: 955 pass 956 957# Recent versions of scons substitute a "Null" object for Configure() 958# when configuration isn't necessary, e.g., if the "--help" option is 959# present. Unfortuantely this Null object always returns false, 960# breaking all our configuration checks. We replace it with our own 961# more optimistic null object that returns True instead. 962if not conf: 963 def NullCheck(*args, **kwargs): 964 return True 965 966 class NullConf: 967 def __init__(self, env): 968 self.env = env 969 def Finish(self): 970 return self.env 971 def __getattr__(self, mname): 972 return NullCheck 973 974 conf = NullConf(main) 975 976# Cache build files in the supplied directory. 977if main['M5_BUILD_CACHE']: 978 print 'Using build cache located at', main['M5_BUILD_CACHE'] 979 CacheDir(main['M5_BUILD_CACHE']) 980 981if not GetOption('without_python'): 982 # Find Python include and library directories for embedding the 983 # interpreter. We rely on python-config to resolve the appropriate 984 # includes and linker flags. ParseConfig does not seem to understand 985 # the more exotic linker flags such as -Xlinker and -export-dynamic so 986 # we add them explicitly below. If you want to link in an alternate 987 # version of python, see above for instructions on how to invoke 988 # scons with the appropriate PATH set. 989 # 990 # First we check if python2-config exists, else we use python-config 991 python_config = readCommand(['which', 'python2-config'], 992 exception='').strip() 993 if not os.path.exists(python_config): 994 python_config = readCommand(['which', 'python-config'], 995 exception='').strip() 996 py_includes = readCommand([python_config, '--includes'], 997 exception='').split() 998 # Strip the -I from the include folders before adding them to the 999 # CPPPATH 1000 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes)) 1001 1002 # Read the linker flags and split them into libraries and other link 1003 # flags. The libraries are added later through the call the CheckLib. 1004 py_ld_flags = readCommand([python_config, '--ldflags'], 1005 exception='').split() 1006 py_libs = [] 1007 for lib in py_ld_flags: 1008 if not lib.startswith('-l'): 1009 main.Append(LINKFLAGS=[lib]) 1010 else: 1011 lib = lib[2:] 1012 if lib not in py_libs: 1013 py_libs.append(lib) 1014 1015 # verify that this stuff works 1016 if not conf.CheckHeader('Python.h', '<>'): 1017 print "Error: can't find Python.h header in", py_includes 1018 print "Install Python headers (package python-dev on Ubuntu and RedHat)" 1019 Exit(1) 1020 1021 for lib in py_libs: 1022 if not conf.CheckLib(lib): 1023 print "Error: can't find library %s required by python" % lib 1024 Exit(1) 1025 1026# On Solaris you need to use libsocket for socket ops 1027if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1028 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1029 print "Can't find library with socket calls (e.g. accept())" 1030 Exit(1) 1031 1032# Check for zlib. If the check passes, libz will be automatically 1033# added to the LIBS environment variable. 1034if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 1035 print 'Error: did not find needed zlib compression library '\ 1036 'and/or zlib.h header file.' 1037 print ' Please install zlib and try again.' 1038 Exit(1) 1039 1040# If we have the protobuf compiler, also make sure we have the 1041# development libraries. If the check passes, libprotobuf will be 1042# automatically added to the LIBS environment variable. After 1043# this, we can use the HAVE_PROTOBUF flag to determine if we have 1044# got both protoc and libprotobuf available. 1045main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 1046 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 1047 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 1048 1049# If we have the compiler but not the library, print another warning. 1050if main['PROTOC'] and not main['HAVE_PROTOBUF']: 1051 print termcap.Yellow + termcap.Bold + \ 1052 'Warning: did not find protocol buffer library and/or headers.\n' + \ 1053 ' Please install libprotobuf-dev for tracing support.' + \ 1054 termcap.Normal 1055 1056# Check for librt. 1057have_posix_clock = \ 1058 conf.CheckLibWithHeader(None, 'time.h', 'C', 1059 'clock_nanosleep(0,0,NULL,NULL);') or \ 1060 conf.CheckLibWithHeader('rt', 'time.h', 'C', 1061 'clock_nanosleep(0,0,NULL,NULL);') 1062 1063have_posix_timers = \ 1064 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 1065 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 1066 1067if not GetOption('without_tcmalloc'): 1068 if conf.CheckLib('tcmalloc'): 1069 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1070 elif conf.CheckLib('tcmalloc_minimal'): 1071 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1072 else: 1073 print termcap.Yellow + termcap.Bold + \ 1074 "You can get a 12% performance improvement by "\ 1075 "installing tcmalloc (libgoogle-perftools-dev package "\ 1076 "on Ubuntu or RedHat)." + termcap.Normal 1077 1078 1079# Detect back trace implementations. The last implementation in the 1080# list will be used by default. 1081backtrace_impls = [ "none" ] 1082 1083if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', 1084 'backtrace_symbols_fd((void*)0, 0, 0);'): 1085 backtrace_impls.append("glibc") 1086 1087if backtrace_impls[-1] == "none": 1088 default_backtrace_impl = "none" 1089 print termcap.Yellow + termcap.Bold + \ 1090 "No suitable back trace implementation found." + \ 1091 termcap.Normal 1092 1093if not have_posix_clock: 1094 print "Can't find library for POSIX clocks." 1095 1096# Check for <fenv.h> (C99 FP environment control) 1097have_fenv = conf.CheckHeader('fenv.h', '<>') 1098if not have_fenv: 1099 print "Warning: Header file <fenv.h> not found." 1100 print " This host has no IEEE FP rounding mode control." 1101 1102# Check if we should enable KVM-based hardware virtualization. The API 1103# we rely on exists since version 2.6.36 of the kernel, but somehow 1104# the KVM_API_VERSION does not reflect the change. We test for one of 1105# the types as a fall back. 1106have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 1107if not have_kvm: 1108 print "Info: Compatible header file <linux/kvm.h> not found, " \ 1109 "disabling KVM support." 1110 1111# x86 needs support for xsave. We test for the structure here since we 1112# won't be able to run new tests by the time we know which ISA we're 1113# targeting. 1114have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 1115 '#include <linux/kvm.h>') != 0 1116 1117# Check if the requested target ISA is compatible with the host 1118def is_isa_kvm_compatible(isa): 1119 try: 1120 import platform 1121 host_isa = platform.machine() 1122 except: 1123 print "Warning: Failed to determine host ISA." 1124 return False 1125 1126 if not have_posix_timers: 1127 print "Warning: Can not enable KVM, host seems to lack support " \ 1128 "for POSIX timers" 1129 return False 1130 1131 if isa == "arm": 1132 return host_isa in ( "armv7l", "aarch64" ) 1133 elif isa == "x86": 1134 if host_isa != "x86_64": 1135 return False 1136 1137 if not have_kvm_xsave: 1138 print "KVM on x86 requires xsave support in kernel headers." 1139 return False 1140 1141 return True 1142 else: 1143 return False 1144 1145 1146# Check if the exclude_host attribute is available. We want this to 1147# get accurate instruction counts in KVM. 1148main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 1149 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 1150 1151 1152###################################################################### 1153# 1154# Finish the configuration 1155# 1156main = conf.Finish() 1157 1158###################################################################### 1159# 1160# Collect all non-global variables 1161# 1162 1163# Define the universe of supported ISAs 1164all_isa_list = [ ] 1165all_gpu_isa_list = [ ] 1166Export('all_isa_list') 1167Export('all_gpu_isa_list') 1168 1169class CpuModel(object): 1170 '''The CpuModel class encapsulates everything the ISA parser needs to 1171 know about a particular CPU model.''' 1172 1173 # Dict of available CPU model objects. Accessible as CpuModel.dict. 1174 dict = {} 1175 1176 # Constructor. Automatically adds models to CpuModel.dict. 1177 def __init__(self, name, default=False): 1178 self.name = name # name of model 1179 1180 # This cpu is enabled by default 1181 self.default = default 1182 1183 # Add self to dict 1184 if name in CpuModel.dict: 1185 raise AttributeError, "CpuModel '%s' already registered" % name 1186 CpuModel.dict[name] = self 1187 1188Export('CpuModel') 1189 1190# Sticky variables get saved in the variables file so they persist from 1191# one invocation to the next (unless overridden, in which case the new 1192# value becomes sticky). 1193sticky_vars = Variables(args=ARGUMENTS) 1194Export('sticky_vars') 1195 1196# Sticky variables that should be exported 1197export_vars = [] 1198Export('export_vars') 1199 1200# For Ruby 1201all_protocols = [] 1202Export('all_protocols') 1203protocol_dirs = [] 1204Export('protocol_dirs') 1205slicc_includes = [] 1206Export('slicc_includes') 1207 1208# Walk the tree and execute all SConsopts scripts that wil add to the 1209# above variables 1210if GetOption('verbose'): 1211 print "Reading SConsopts" 1212for bdir in [ base_dir ] + extras_dir_list: 1213 if not isdir(bdir): 1214 print "Error: directory '%s' does not exist" % bdir 1215 Exit(1) 1216 for root, dirs, files in os.walk(bdir): 1217 if 'SConsopts' in files: 1218 if GetOption('verbose'): 1219 print "Reading", joinpath(root, 'SConsopts') 1220 SConscript(joinpath(root, 'SConsopts')) 1221 1222all_isa_list.sort() 1223all_gpu_isa_list.sort() 1224 1225sticky_vars.AddVariables( 1226 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 1227 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 1228 ListVariable('CPU_MODELS', 'CPU models', 1229 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 1230 sorted(CpuModel.dict.keys())), 1231 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 1232 False), 1233 BoolVariable('SS_COMPATIBLE_FP', 1234 'Make floating-point results compatible with SimpleScalar', 1235 False), 1236 BoolVariable('USE_SSE2', 1237 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1238 False), 1239 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1240 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1241 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 1242 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm), 1243 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1244 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1245 all_protocols), 1246 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1247 backtrace_impls[-1], backtrace_impls) 1248 ) 1249 1250# These variables get exported to #defines in config/*.hh (see src/SConscript). 1251export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1252 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 1253 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST'] 1254 1255################################################### 1256# 1257# Define a SCons builder for configuration flag headers. 1258# 1259################################################### 1260 1261# This function generates a config header file that #defines the 1262# variable symbol to the current variable setting (0 or 1). The source 1263# operands are the name of the variable and a Value node containing the 1264# value of the variable. 1265def build_config_file(target, source, env): 1266 (variable, value) = [s.get_contents() for s in source] 1267 f = file(str(target[0]), 'w') 1268 print >> f, '#define', variable, value 1269 f.close() 1270 return None 1271 1272# Combine the two functions into a scons Action object. 1273config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1274 1275# The emitter munges the source & target node lists to reflect what 1276# we're really doing. 1277def config_emitter(target, source, env): 1278 # extract variable name from Builder arg 1279 variable = str(target[0]) 1280 # True target is config header file 1281 target = joinpath('config', variable.lower() + '.hh') 1282 val = env[variable] 1283 if isinstance(val, bool): 1284 # Force value to 0/1 1285 val = int(val) 1286 elif isinstance(val, str): 1287 val = '"' + val + '"' 1288 1289 # Sources are variable name & value (packaged in SCons Value nodes) 1290 return ([target], [Value(variable), Value(val)]) 1291 1292config_builder = Builder(emitter = config_emitter, action = config_action) 1293 1294main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1295 1296# libelf build is shared across all configs in the build root. 1297main.SConscript('ext/libelf/SConscript', 1298 variant_dir = joinpath(build_root, 'libelf')) 1299 1300# iostream3 build is shared across all configs in the build root. 1301main.SConscript('ext/iostream3/SConscript', 1302 variant_dir = joinpath(build_root, 'iostream3')) 1303 1304# libfdt build is shared across all configs in the build root. 1305main.SConscript('ext/libfdt/SConscript', 1306 variant_dir = joinpath(build_root, 'libfdt')) 1307 1308# fputils build is shared across all configs in the build root. 1309main.SConscript('ext/fputils/SConscript', 1310 variant_dir = joinpath(build_root, 'fputils')) 1311 1312# DRAMSim2 build is shared across all configs in the build root. 1313main.SConscript('ext/dramsim2/SConscript', 1314 variant_dir = joinpath(build_root, 'dramsim2')) 1315 1316# DRAMPower build is shared across all configs in the build root. 1317main.SConscript('ext/drampower/SConscript', 1318 variant_dir = joinpath(build_root, 'drampower')) 1319 1320# nomali build is shared across all configs in the build root. 1321main.SConscript('ext/nomali/SConscript', 1322 variant_dir = joinpath(build_root, 'nomali')) 1323 1324################################################### 1325# 1326# This function is used to set up a directory with switching headers 1327# 1328################################################### 1329 1330main['ALL_ISA_LIST'] = all_isa_list 1331main['ALL_GPU_ISA_LIST'] = all_gpu_isa_list 1332all_isa_deps = {} 1333def make_switching_dir(dname, switch_headers, env): 1334 # Generate the header. target[0] is the full path of the output 1335 # header to generate. 'source' is a dummy variable, since we get the 1336 # list of ISAs from env['ALL_ISA_LIST']. 1337 def gen_switch_hdr(target, source, env): 1338 fname = str(target[0]) 1339 isa = env['TARGET_ISA'].lower() 1340 try: 1341 f = open(fname, 'w') 1342 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1343 f.close() 1344 except IOError: 1345 print "Failed to create %s" % fname 1346 raise 1347 1348 # Build SCons Action object. 'varlist' specifies env vars that this 1349 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1350 # should get re-executed. 1351 switch_hdr_action = MakeAction(gen_switch_hdr, 1352 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 1353 1354 # Instantiate actions for each header 1355 for hdr in switch_headers: 1356 env.Command(hdr, [], switch_hdr_action) 1357 1358 isa_target = Dir('.').up().name.lower().replace('_', '-') 1359 env['PHONY_BASE'] = '#'+isa_target 1360 all_isa_deps[isa_target] = None 1361 1362Export('make_switching_dir') 1363 1364def make_gpu_switching_dir(dname, switch_headers, env): 1365 # Generate the header. target[0] is the full path of the output 1366 # header to generate. 'source' is a dummy variable, since we get the 1367 # list of ISAs from env['ALL_ISA_LIST']. 1368 def gen_switch_hdr(target, source, env): 1369 fname = str(target[0]) 1370 1371 isa = env['TARGET_GPU_ISA'].lower() 1372 1373 try: 1374 f = open(fname, 'w') 1375 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1376 f.close() 1377 except IOError: 1378 print "Failed to create %s" % fname 1379 raise 1380 1381 # Build SCons Action object. 'varlist' specifies env vars that this 1382 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1383 # should get re-executed. 1384 switch_hdr_action = MakeAction(gen_switch_hdr, 1385 Transform("GENERATE"), varlist=['ALL_ISA_GPU_LIST']) 1386 1387 # Instantiate actions for each header 1388 for hdr in switch_headers: 1389 env.Command(hdr, [], switch_hdr_action) 1390 1391Export('make_gpu_switching_dir') 1392 1393# all-isas -> all-deps -> all-environs -> all_targets 1394main.Alias('#all-isas', []) 1395main.Alias('#all-deps', '#all-isas') 1396 1397# Dummy target to ensure all environments are created before telling 1398# SCons what to actually make (the command line arguments). We attach 1399# them to the dependence graph after the environments are complete. 1400ORIG_BUILD_TARGETS = list(BUILD_TARGETS) # force a copy; gets closure to work. 1401def environsComplete(target, source, env): 1402 for t in ORIG_BUILD_TARGETS: 1403 main.Depends('#all-targets', t) 1404 1405# Each build/* switching_dir attaches its *-environs target to #all-environs. 1406main.Append(BUILDERS = {'CompleteEnvirons' : 1407 Builder(action=MakeAction(environsComplete, None))}) 1408main.CompleteEnvirons('#all-environs', []) 1409 1410def doNothing(**ignored): pass 1411main.Append(BUILDERS = {'Dummy': Builder(action=MakeAction(doNothing, None))}) 1412 1413# The final target to which all the original targets ultimately get attached. 1414main.Dummy('#all-targets', '#all-environs') 1415BUILD_TARGETS[:] = ['#all-targets'] 1416 1417################################################### 1418# 1419# Define build environments for selected configurations. 1420# 1421################################################### 1422 1423for variant_path in variant_paths: 1424 if not GetOption('silent'): 1425 print "Building in", variant_path 1426 1427 # Make a copy of the build-root environment to use for this config. 1428 env = main.Clone() 1429 env['BUILDDIR'] = variant_path 1430 1431 # variant_dir is the tail component of build path, and is used to 1432 # determine the build parameters (e.g., 'ALPHA_SE') 1433 (build_root, variant_dir) = splitpath(variant_path) 1434 1435 # Set env variables according to the build directory config. 1436 sticky_vars.files = [] 1437 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1438 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1439 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1440 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1441 if isfile(current_vars_file): 1442 sticky_vars.files.append(current_vars_file) 1443 if not GetOption('silent'): 1444 print "Using saved variables file %s" % current_vars_file 1445 else: 1446 # Build dir-specific variables file doesn't exist. 1447 1448 # Make sure the directory is there so we can create it later 1449 opt_dir = dirname(current_vars_file) 1450 if not isdir(opt_dir): 1451 mkdir(opt_dir) 1452 1453 # Get default build variables from source tree. Variables are 1454 # normally determined by name of $VARIANT_DIR, but can be 1455 # overridden by '--default=' arg on command line. 1456 default = GetOption('default') 1457 opts_dir = joinpath(main.root.abspath, 'build_opts') 1458 if default: 1459 default_vars_files = [joinpath(build_root, 'variables', default), 1460 joinpath(opts_dir, default)] 1461 else: 1462 default_vars_files = [joinpath(opts_dir, variant_dir)] 1463 existing_files = filter(isfile, default_vars_files) 1464 if existing_files: 1465 default_vars_file = existing_files[0] 1466 sticky_vars.files.append(default_vars_file) 1467 print "Variables file %s not found,\n using defaults in %s" \ 1468 % (current_vars_file, default_vars_file) 1469 else: 1470 print "Error: cannot find variables file %s or " \ 1471 "default file(s) %s" \ 1472 % (current_vars_file, ' or '.join(default_vars_files)) 1473 Exit(1) 1474 1475 # Apply current variable settings to env 1476 sticky_vars.Update(env) 1477 1478 help_texts["local_vars"] += \ 1479 "Build variables for %s:\n" % variant_dir \ 1480 + sticky_vars.GenerateHelpText(env) 1481 1482 # Process variable settings. 1483 1484 if not have_fenv and env['USE_FENV']: 1485 print "Warning: <fenv.h> not available; " \ 1486 "forcing USE_FENV to False in", variant_dir + "." 1487 env['USE_FENV'] = False 1488 1489 if not env['USE_FENV']: 1490 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1491 print " FP results may deviate slightly from other platforms." 1492 1493 if env['EFENCE']: 1494 env.Append(LIBS=['efence']) 1495 1496 if env['USE_KVM']: 1497 if not have_kvm: 1498 print "Warning: Can not enable KVM, host seems to lack KVM support" 1499 env['USE_KVM'] = False 1500 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1501 print "Info: KVM support disabled due to unsupported host and " \ 1502 "target ISA combination" 1503 env['USE_KVM'] = False 1504 1505 if env['BUILD_GPU']: 1506 env.Append(CPPDEFINES=['BUILD_GPU']) 1507 1508 # Warn about missing optional functionality 1509 if env['USE_KVM']: 1510 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1511 print "Warning: perf_event headers lack support for the " \ 1512 "exclude_host attribute. KVM instruction counts will " \ 1513 "be inaccurate." 1514 1515 # Save sticky variable settings back to current variables file 1516 sticky_vars.Save(current_vars_file, env) 1517 1518 if env['USE_SSE2']: 1519 env.Append(CCFLAGS=['-msse2']) 1520 1521 # The src/SConscript file sets up the build rules in 'env' according 1522 # to the configured variables. It returns a list of environments, 1523 # one for each variant build (debug, opt, etc.) 1524 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env') 1525 1526def pairwise(iterable): 1527 "s -> (s0,s1), (s1,s2), (s2, s3), ..." 1528 a, b = itertools.tee(iterable) 1529 b.next() 1530 return itertools.izip(a, b) 1531 1532# Create false dependencies so SCons will parse ISAs, establish 1533# dependencies, and setup the build Environments serially. Either 1534# SCons (likely) and/or our SConscripts (possibly) cannot cope with -j 1535# greater than 1. It appears to be standard race condition stuff; it 1536# doesn't always fail, but usually, and the behaviors are different. 1537# Every time I tried to remove this, builds would fail in some 1538# creative new way. So, don't do that. You'll want to, though, because 1539# tests/SConscript takes a long time to make its Environments. 1540for t1, t2 in pairwise(sorted(all_isa_deps.iterkeys())): 1541 main.Depends('#%s-deps' % t2, '#%s-deps' % t1) 1542 main.Depends('#%s-environs' % t2, '#%s-environs' % t1) 1543 1544# base help text 1545Help(''' 1546Usage: scons [scons options] [build variables] [target(s)] 1547 1548Extra scons options: 1549%(options)s 1550 1551Global build variables: 1552%(global_vars)s 1553 1554%(local_vars)s 1555''' % help_texts) 1556