SConstruct revision 11408
1# -*- mode:python -*- 2 3# Copyright (c) 2013, 2015, 2016 ARM Limited 4# All rights reserved. 5# 6# The license below extends only to copyright in the software and shall 7# not be construed as granting a license to any other intellectual 8# property including but not limited to intellectual property relating 9# to a hardware implementation of the functionality of the software 10# licensed hereunder. You may use the software subject to the license 11# terms below provided that you ensure that this notice is replicated 12# unmodified and in its entirety in all distributions of the software, 13# modified or unmodified, in source code or in binary form. 14# 15# Copyright (c) 2011 Advanced Micro Devices, Inc. 16# Copyright (c) 2009 The Hewlett-Packard Development Company 17# Copyright (c) 2004-2005 The Regents of The University of Michigan 18# All rights reserved. 19# 20# Redistribution and use in source and binary forms, with or without 21# modification, are permitted provided that the following conditions are 22# met: redistributions of source code must retain the above copyright 23# notice, this list of conditions and the following disclaimer; 24# redistributions in binary form must reproduce the above copyright 25# notice, this list of conditions and the following disclaimer in the 26# documentation and/or other materials provided with the distribution; 27# neither the name of the copyright holders nor the names of its 28# contributors may be used to endorse or promote products derived from 29# this software without specific prior written permission. 30# 31# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 34# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 36# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 37# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 38# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 39# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 40# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 41# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 42# 43# Authors: Steve Reinhardt 44# Nathan Binkert 45 46################################################### 47# 48# SCons top-level build description (SConstruct) file. 49# 50# While in this directory ('gem5'), just type 'scons' to build the default 51# configuration (see below), or type 'scons build/<CONFIG>/<binary>' 52# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for 53# the optimized full-system version). 54# 55# You can build gem5 in a different directory as long as there is a 56# 'build/<CONFIG>' somewhere along the target path. The build system 57# expects that all configs under the same build directory are being 58# built for the same host system. 59# 60# Examples: 61# 62# The following two commands are equivalent. The '-u' option tells 63# scons to search up the directory tree for this SConstruct file. 64# % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug 65# % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug 66# 67# The following two commands are equivalent and demonstrate building 68# in a directory outside of the source tree. The '-C' option tells 69# scons to chdir to the specified directory to find this SConstruct 70# file. 71# % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug 72# % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug 73# 74# You can use 'scons -H' to print scons options. If you're in this 75# 'gem5' directory (or use -u or -C to tell scons where to find this 76# file), you can use 'scons -h' to print all the gem5-specific build 77# options as well. 78# 79################################################### 80 81# Check for recent-enough Python and SCons versions. 82try: 83 # Really old versions of scons only take two options for the 84 # function, so check once without the revision and once with the 85 # revision, the first instance will fail for stuff other than 86 # 0.98, and the second will fail for 0.98.0 87 EnsureSConsVersion(0, 98) 88 EnsureSConsVersion(0, 98, 1) 89except SystemExit, e: 90 print """ 91For more details, see: 92 http://gem5.org/Dependencies 93""" 94 raise 95 96# We ensure the python version early because because python-config 97# requires python 2.5 98try: 99 EnsurePythonVersion(2, 5) 100except SystemExit, e: 101 print """ 102You can use a non-default installation of the Python interpreter by 103rearranging your PATH so that scons finds the non-default 'python' and 104'python-config' first. 105 106For more details, see: 107 http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation 108""" 109 raise 110 111# Global Python includes 112import itertools 113import os 114import re 115import shutil 116import subprocess 117import sys 118 119from os import mkdir, environ 120from os.path import abspath, basename, dirname, expanduser, normpath 121from os.path import exists, isdir, isfile 122from os.path import join as joinpath, split as splitpath 123 124# SCons includes 125import SCons 126import SCons.Node 127 128extra_python_paths = [ 129 Dir('src/python').srcnode().abspath, # gem5 includes 130 Dir('ext/ply').srcnode().abspath, # ply is used by several files 131 ] 132 133sys.path[1:1] = extra_python_paths 134 135from m5.util import compareVersions, readCommand 136from m5.util.terminal import get_termcap 137 138help_texts = { 139 "options" : "", 140 "global_vars" : "", 141 "local_vars" : "" 142} 143 144Export("help_texts") 145 146 147# There's a bug in scons in that (1) by default, the help texts from 148# AddOption() are supposed to be displayed when you type 'scons -h' 149# and (2) you can override the help displayed by 'scons -h' using the 150# Help() function, but these two features are incompatible: once 151# you've overridden the help text using Help(), there's no way to get 152# at the help texts from AddOptions. See: 153# http://scons.tigris.org/issues/show_bug.cgi?id=2356 154# http://scons.tigris.org/issues/show_bug.cgi?id=2611 155# This hack lets us extract the help text from AddOptions and 156# re-inject it via Help(). Ideally someday this bug will be fixed and 157# we can just use AddOption directly. 158def AddLocalOption(*args, **kwargs): 159 col_width = 30 160 161 help = " " + ", ".join(args) 162 if "help" in kwargs: 163 length = len(help) 164 if length >= col_width: 165 help += "\n" + " " * col_width 166 else: 167 help += " " * (col_width - length) 168 help += kwargs["help"] 169 help_texts["options"] += help + "\n" 170 171 AddOption(*args, **kwargs) 172 173AddLocalOption('--colors', dest='use_colors', action='store_true', 174 help="Add color to abbreviated scons output") 175AddLocalOption('--no-colors', dest='use_colors', action='store_false', 176 help="Don't add color to abbreviated scons output") 177AddLocalOption('--with-cxx-config', dest='with_cxx_config', 178 action='store_true', 179 help="Build with support for C++-based configuration") 180AddLocalOption('--default', dest='default', type='string', action='store', 181 help='Override which build_opts file to use for defaults') 182AddLocalOption('--ignore-style', dest='ignore_style', action='store_true', 183 help='Disable style checking hooks') 184AddLocalOption('--no-lto', dest='no_lto', action='store_true', 185 help='Disable Link-Time Optimization for fast') 186AddLocalOption('--update-ref', dest='update_ref', action='store_true', 187 help='Update test reference outputs') 188AddLocalOption('--verbose', dest='verbose', action='store_true', 189 help='Print full tool command lines') 190AddLocalOption('--without-python', dest='without_python', 191 action='store_true', 192 help='Build without Python configuration support') 193AddLocalOption('--without-tcmalloc', dest='without_tcmalloc', 194 action='store_true', 195 help='Disable linking against tcmalloc') 196AddLocalOption('--with-ubsan', dest='with_ubsan', action='store_true', 197 help='Build with Undefined Behavior Sanitizer if available') 198AddLocalOption('--with-asan', dest='with_asan', action='store_true', 199 help='Build with Address Sanitizer if available') 200 201termcap = get_termcap(GetOption('use_colors')) 202 203######################################################################## 204# 205# Set up the main build environment. 206# 207######################################################################## 208 209# export TERM so that clang reports errors in color 210use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH', 211 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PROTOC', 212 'PYTHONPATH', 'RANLIB', 'SWIG', 'TERM' ]) 213 214use_prefixes = [ 215 "ASAN_", # address sanitizer symbolizer path and settings 216 "CCACHE_", # ccache (caching compiler wrapper) configuration 217 "CCC_", # clang static analyzer configuration 218 "DISTCC_", # distcc (distributed compiler wrapper) configuration 219 "INCLUDE_SERVER_", # distcc pump server settings 220 "M5", # M5 configuration (e.g., path to kernels) 221 ] 222 223use_env = {} 224for key,val in sorted(os.environ.iteritems()): 225 if key in use_vars or \ 226 any([key.startswith(prefix) for prefix in use_prefixes]): 227 use_env[key] = val 228 229# Tell scons to avoid implicit command dependencies to avoid issues 230# with the param wrappes being compiled twice (see 231# http://scons.tigris.org/issues/show_bug.cgi?id=2811) 232main = Environment(ENV=use_env, IMPLICIT_COMMAND_DEPENDENCIES=0) 233main.Decider('MD5-timestamp') 234main.root = Dir(".") # The current directory (where this file lives). 235main.srcdir = Dir("src") # The source directory 236 237main_dict_keys = main.Dictionary().keys() 238 239# Check that we have a C/C++ compiler 240if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys): 241 print "No C++ compiler installed (package g++ on Ubuntu and RedHat)" 242 Exit(1) 243 244# Check that swig is present 245if not 'SWIG' in main_dict_keys: 246 print "swig is not installed (package swig on Ubuntu and RedHat)" 247 Exit(1) 248 249# add useful python code PYTHONPATH so it can be used by subprocesses 250# as well 251main.AppendENVPath('PYTHONPATH', extra_python_paths) 252 253######################################################################## 254# 255# Mercurial Stuff. 256# 257# If the gem5 directory is a mercurial repository, we should do some 258# extra things. 259# 260######################################################################## 261 262hgdir = main.root.Dir(".hg") 263gitdir = main.root.Dir(".git") 264 265 266style_message = """ 267You're missing the gem5 style hook, which automatically checks your code 268against the gem5 style rules on hg commit and qrefresh commands. This 269script will now install the hook in your %s. 270Press enter to continue, or ctrl-c to abort: """ 271 272mercurial_style_message = style_message % ".hg/hgrc file" 273git_style_message = style_message % ".git/hooks/ directory" 274 275mercurial_style_upgrade_message = """ 276Your Mercurial style hooks are not up-to-date. This script will now 277try to automatically update them. A backup of your hgrc will be saved 278in .hg/hgrc.old. 279Press enter to continue, or ctrl-c to abort: """ 280 281mercurial_style_hook = """ 282# The following lines were automatically added by gem5/SConstruct 283# to provide the gem5 style-checking hooks 284[extensions] 285hgstyle = %s/util/hgstyle.py 286 287[hooks] 288pretxncommit.style = python:hgstyle.check_style 289pre-qrefresh.style = python:hgstyle.check_style 290# End of SConstruct additions 291 292""" % (main.root.abspath) 293 294mercurial_lib_not_found = """ 295Mercurial libraries cannot be found, ignoring style hook. If 296you are a gem5 developer, please fix this and run the style 297hook. It is important. 298""" 299 300# Check for style hook and prompt for installation if it's not there. 301# Skip this if --ignore-style was specified, there's no interactive 302# terminal to prompt, or no recognized revision control system can be 303# found. 304ignore_style = GetOption('ignore_style') or not sys.stdin.isatty() 305 306# Try wire up Mercurial to the style hooks 307if not ignore_style and hgdir.exists(): 308 style_hook = True 309 style_hooks = tuple() 310 hgrc = hgdir.File('hgrc') 311 hgrc_old = hgdir.File('hgrc.old') 312 try: 313 from mercurial import ui 314 ui = ui.ui() 315 ui.readconfig(hgrc.abspath) 316 style_hooks = (ui.config('hooks', 'pretxncommit.style', None), 317 ui.config('hooks', 'pre-qrefresh.style', None)) 318 style_hook = all(style_hooks) 319 style_extension = ui.config('extensions', 'style', None) 320 except ImportError: 321 print mercurial_lib_not_found 322 323 if "python:style.check_style" in style_hooks: 324 # Try to upgrade the style hooks 325 print mercurial_style_upgrade_message 326 # continue unless user does ctrl-c/ctrl-d etc. 327 try: 328 raw_input() 329 except: 330 print "Input exception, exiting scons.\n" 331 sys.exit(1) 332 shutil.copyfile(hgrc.abspath, hgrc_old.abspath) 333 re_style_hook = re.compile(r"^([^=#]+)\.style\s*=\s*([^#\s]+).*") 334 re_style_extension = re.compile("style\s*=\s*([^#\s]+).*") 335 with open(hgrc_old.abspath, 'r') as old, \ 336 open(hgrc.abspath, 'w') as new: 337 338 for l in old: 339 m_hook = re_style_hook.match(l) 340 m_ext = re_style_extension.match(l) 341 if m_hook: 342 hook, check = m_hook.groups() 343 if check != "python:style.check_style": 344 print "Warning: %s.style is using a non-default " \ 345 "checker: %s" % (hook, check) 346 if hook not in ("pretxncommit", "pre-qrefresh"): 347 print "Warning: Updating unknown style hook: %s" % hook 348 349 l = "%s.style = python:hgstyle.check_style\n" % hook 350 elif m_ext and m_ext.group(1) == style_extension: 351 l = "hgstyle = %s/util/hgstyle.py\n" % main.root.abspath 352 353 new.write(l) 354 elif not style_hook: 355 print mercurial_style_message, 356 # continue unless user does ctrl-c/ctrl-d etc. 357 try: 358 raw_input() 359 except: 360 print "Input exception, exiting scons.\n" 361 sys.exit(1) 362 hgrc_path = '%s/.hg/hgrc' % main.root.abspath 363 print "Adding style hook to", hgrc_path, "\n" 364 try: 365 with open(hgrc_path, 'a') as f: 366 f.write(mercurial_style_hook) 367 except: 368 print "Error updating", hgrc_path 369 sys.exit(1) 370 371# Try to wire up git to the style hooks 372git_pre_commit_hook = gitdir.File("hooks/pre-commit") 373if not ignore_style and gitdir.exists() and not git_pre_commit_hook.exists(): 374 git_style_script = File("util/git-pre-commit.py") 375 376 print git_style_message, 377 try: 378 raw_input() 379 except: 380 print "Input exception, exiting scons.\n" 381 sys.exit(1) 382 383 try: 384 rel_style_script = os.path.relpath( 385 git_style_script.get_abspath(), 386 git_pre_commit_hook.Dir(".").get_abspath()) 387 os.symlink(rel_style_script, git_pre_commit_hook.get_abspath()) 388 except: 389 print "Error updating git pre-commit hook" 390 raise 391 sys.exit(1) 392 393################################################### 394# 395# Figure out which configurations to set up based on the path(s) of 396# the target(s). 397# 398################################################### 399 400# Find default configuration & binary. 401Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug')) 402 403# helper function: find last occurrence of element in list 404def rfind(l, elt, offs = -1): 405 for i in range(len(l)+offs, 0, -1): 406 if l[i] == elt: 407 return i 408 raise ValueError, "element not found" 409 410# Take a list of paths (or SCons Nodes) and return a list with all 411# paths made absolute and ~-expanded. Paths will be interpreted 412# relative to the launch directory unless a different root is provided 413def makePathListAbsolute(path_list, root=GetLaunchDir()): 414 return [abspath(joinpath(root, expanduser(str(p)))) 415 for p in path_list] 416 417# Each target must have 'build' in the interior of the path; the 418# directory below this will determine the build parameters. For 419# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we 420# recognize that ALPHA_SE specifies the configuration because it 421# follow 'build' in the build path. 422 423# The funky assignment to "[:]" is needed to replace the list contents 424# in place rather than reassign the symbol to a new list, which 425# doesn't work (obviously!). 426BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS) 427 428# Generate a list of the unique build roots and configs that the 429# collected targets reference. 430variant_paths = [] 431build_root = None 432for t in BUILD_TARGETS: 433 path_dirs = t.split('/') 434 try: 435 build_top = rfind(path_dirs, 'build', -2) 436 except: 437 print "Error: no non-leaf 'build' dir found on target path", t 438 Exit(1) 439 this_build_root = joinpath('/',*path_dirs[:build_top+1]) 440 if not build_root: 441 build_root = this_build_root 442 else: 443 if this_build_root != build_root: 444 print "Error: build targets not under same build root\n"\ 445 " %s\n %s" % (build_root, this_build_root) 446 Exit(1) 447 variant_path = joinpath('/',*path_dirs[:build_top+2]) 448 if variant_path not in variant_paths: 449 variant_paths.append(variant_path) 450 451# Make sure build_root exists (might not if this is the first build there) 452if not isdir(build_root): 453 mkdir(build_root) 454main['BUILDROOT'] = build_root 455 456Export('main') 457 458main.SConsignFile(joinpath(build_root, "sconsign")) 459 460# Default duplicate option is to use hard links, but this messes up 461# when you use emacs to edit a file in the target dir, as emacs moves 462# file to file~ then copies to file, breaking the link. Symbolic 463# (soft) links work better. 464main.SetOption('duplicate', 'soft-copy') 465 466# 467# Set up global sticky variables... these are common to an entire build 468# tree (not specific to a particular build like ALPHA_SE) 469# 470 471global_vars_file = joinpath(build_root, 'variables.global') 472 473global_vars = Variables(global_vars_file, args=ARGUMENTS) 474 475global_vars.AddVariables( 476 ('CC', 'C compiler', environ.get('CC', main['CC'])), 477 ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])), 478 ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])), 479 ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')), 480 ('BATCH', 'Use batch pool for build and tests', False), 481 ('BATCH_CMD', 'Batch pool submission command name', 'qdo'), 482 ('M5_BUILD_CACHE', 'Cache built objects in this directory', False), 483 ('EXTRAS', 'Add extra directories to the compilation', '') 484 ) 485 486# Update main environment with values from ARGUMENTS & global_vars_file 487global_vars.Update(main) 488help_texts["global_vars"] += global_vars.GenerateHelpText(main) 489 490# Save sticky variable settings back to current variables file 491global_vars.Save(global_vars_file, main) 492 493# Parse EXTRAS variable to build list of all directories where we're 494# look for sources etc. This list is exported as extras_dir_list. 495base_dir = main.srcdir.abspath 496if main['EXTRAS']: 497 extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':')) 498else: 499 extras_dir_list = [] 500 501Export('base_dir') 502Export('extras_dir_list') 503 504# the ext directory should be on the #includes path 505main.Append(CPPPATH=[Dir('ext')]) 506 507def strip_build_path(path, env): 508 path = str(path) 509 variant_base = env['BUILDROOT'] + os.path.sep 510 if path.startswith(variant_base): 511 path = path[len(variant_base):] 512 elif path.startswith('build/'): 513 path = path[6:] 514 return path 515 516# Generate a string of the form: 517# common/path/prefix/src1, src2 -> tgt1, tgt2 518# to print while building. 519class Transform(object): 520 # all specific color settings should be here and nowhere else 521 tool_color = termcap.Normal 522 pfx_color = termcap.Yellow 523 srcs_color = termcap.Yellow + termcap.Bold 524 arrow_color = termcap.Blue + termcap.Bold 525 tgts_color = termcap.Yellow + termcap.Bold 526 527 def __init__(self, tool, max_sources=99): 528 self.format = self.tool_color + (" [%8s] " % tool) \ 529 + self.pfx_color + "%s" \ 530 + self.srcs_color + "%s" \ 531 + self.arrow_color + " -> " \ 532 + self.tgts_color + "%s" \ 533 + termcap.Normal 534 self.max_sources = max_sources 535 536 def __call__(self, target, source, env, for_signature=None): 537 # truncate source list according to max_sources param 538 source = source[0:self.max_sources] 539 def strip(f): 540 return strip_build_path(str(f), env) 541 if len(source) > 0: 542 srcs = map(strip, source) 543 else: 544 srcs = [''] 545 tgts = map(strip, target) 546 # surprisingly, os.path.commonprefix is a dumb char-by-char string 547 # operation that has nothing to do with paths. 548 com_pfx = os.path.commonprefix(srcs + tgts) 549 com_pfx_len = len(com_pfx) 550 if com_pfx: 551 # do some cleanup and sanity checking on common prefix 552 if com_pfx[-1] == ".": 553 # prefix matches all but file extension: ok 554 # back up one to change 'foo.cc -> o' to 'foo.cc -> .o' 555 com_pfx = com_pfx[0:-1] 556 elif com_pfx[-1] == "/": 557 # common prefix is directory path: OK 558 pass 559 else: 560 src0_len = len(srcs[0]) 561 tgt0_len = len(tgts[0]) 562 if src0_len == com_pfx_len: 563 # source is a substring of target, OK 564 pass 565 elif tgt0_len == com_pfx_len: 566 # target is a substring of source, need to back up to 567 # avoid empty string on RHS of arrow 568 sep_idx = com_pfx.rfind(".") 569 if sep_idx != -1: 570 com_pfx = com_pfx[0:sep_idx] 571 else: 572 com_pfx = '' 573 elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".": 574 # still splitting at file extension: ok 575 pass 576 else: 577 # probably a fluke; ignore it 578 com_pfx = '' 579 # recalculate length in case com_pfx was modified 580 com_pfx_len = len(com_pfx) 581 def fmt(files): 582 f = map(lambda s: s[com_pfx_len:], files) 583 return ', '.join(f) 584 return self.format % (com_pfx, fmt(srcs), fmt(tgts)) 585 586Export('Transform') 587 588# enable the regression script to use the termcap 589main['TERMCAP'] = termcap 590 591if GetOption('verbose'): 592 def MakeAction(action, string, *args, **kwargs): 593 return Action(action, *args, **kwargs) 594else: 595 MakeAction = Action 596 main['CCCOMSTR'] = Transform("CC") 597 main['CXXCOMSTR'] = Transform("CXX") 598 main['ASCOMSTR'] = Transform("AS") 599 main['SWIGCOMSTR'] = Transform("SWIG") 600 main['ARCOMSTR'] = Transform("AR", 0) 601 main['LINKCOMSTR'] = Transform("LINK", 0) 602 main['RANLIBCOMSTR'] = Transform("RANLIB", 0) 603 main['M4COMSTR'] = Transform("M4") 604 main['SHCCCOMSTR'] = Transform("SHCC") 605 main['SHCXXCOMSTR'] = Transform("SHCXX") 606Export('MakeAction') 607 608# Initialize the Link-Time Optimization (LTO) flags 609main['LTO_CCFLAGS'] = [] 610main['LTO_LDFLAGS'] = [] 611 612# According to the readme, tcmalloc works best if the compiler doesn't 613# assume that we're using the builtin malloc and friends. These flags 614# are compiler-specific, so we need to set them after we detect which 615# compiler we're using. 616main['TCMALLOC_CCFLAGS'] = [] 617 618CXX_version = readCommand([main['CXX'],'--version'], exception=False) 619CXX_V = readCommand([main['CXX'],'-V'], exception=False) 620 621main['GCC'] = CXX_version and CXX_version.find('g++') >= 0 622main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0 623if main['GCC'] + main['CLANG'] > 1: 624 print 'Error: How can we have two at the same time?' 625 Exit(1) 626 627# Set up default C++ compiler flags 628if main['GCC'] or main['CLANG']: 629 # As gcc and clang share many flags, do the common parts here 630 main.Append(CCFLAGS=['-pipe']) 631 main.Append(CCFLAGS=['-fno-strict-aliasing']) 632 # Enable -Wall and -Wextra and then disable the few warnings that 633 # we consistently violate 634 main.Append(CCFLAGS=['-Wall', '-Wundef', '-Wextra', 635 '-Wno-sign-compare', '-Wno-unused-parameter']) 636 # We always compile using C++11 637 main.Append(CXXFLAGS=['-std=c++11']) 638else: 639 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 640 print "Don't know what compiler options to use for your compiler." 641 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 642 print termcap.Yellow + ' version:' + termcap.Normal, 643 if not CXX_version: 644 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 645 termcap.Normal 646 else: 647 print CXX_version.replace('\n', '<nl>') 648 print " If you're trying to use a compiler other than GCC" 649 print " or clang, there appears to be something wrong with your" 650 print " environment." 651 print " " 652 print " If you are trying to use a compiler other than those listed" 653 print " above you will need to ease fix SConstruct and " 654 print " src/SConscript to support that compiler." 655 Exit(1) 656 657if main['GCC']: 658 # Check for a supported version of gcc. >= 4.7 is chosen for its 659 # level of c++11 support. See 660 # http://gcc.gnu.org/projects/cxx0x.html for details. 661 gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False) 662 if compareVersions(gcc_version, "4.7") < 0: 663 print 'Error: gcc version 4.7 or newer required.' 664 print ' Installed version:', gcc_version 665 Exit(1) 666 667 main['GCC_VERSION'] = gcc_version 668 669 # gcc from version 4.8 and above generates "rep; ret" instructions 670 # to avoid performance penalties on certain AMD chips. Older 671 # assemblers detect this as an error, "Error: expecting string 672 # instruction after `rep'" 673 if compareVersions(gcc_version, "4.8") > 0: 674 as_version_raw = readCommand([main['AS'], '-v', '/dev/null'], 675 exception=False).split() 676 677 # version strings may contain extra distro-specific 678 # qualifiers, so play it safe and keep only what comes before 679 # the first hyphen 680 as_version = as_version_raw[-1].split('-')[0] if as_version_raw \ 681 else None 682 683 if not as_version or compareVersions(as_version, "2.23") < 0: 684 print termcap.Yellow + termcap.Bold + \ 685 'Warning: This combination of gcc and binutils have' + \ 686 ' known incompatibilities.\n' + \ 687 ' If you encounter build problems, please update ' + \ 688 'binutils to 2.23.' + \ 689 termcap.Normal 690 691 # Make sure we warn if the user has requested to compile with the 692 # Undefined Benahvior Sanitizer and this version of gcc does not 693 # support it. 694 if GetOption('with_ubsan') and \ 695 compareVersions(gcc_version, '4.9') < 0: 696 print termcap.Yellow + termcap.Bold + \ 697 'Warning: UBSan is only supported using gcc 4.9 and later.' + \ 698 termcap.Normal 699 700 # Add the appropriate Link-Time Optimization (LTO) flags 701 # unless LTO is explicitly turned off. Note that these flags 702 # are only used by the fast target. 703 if not GetOption('no_lto'): 704 # Pass the LTO flag when compiling to produce GIMPLE 705 # output, we merely create the flags here and only append 706 # them later 707 main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 708 709 # Use the same amount of jobs for LTO as we are running 710 # scons with 711 main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs')] 712 713 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin-malloc', '-fno-builtin-calloc', 714 '-fno-builtin-realloc', '-fno-builtin-free']) 715 716elif main['CLANG']: 717 # Check for a supported version of clang, >= 3.1 is needed to 718 # support similar features as gcc 4.7. See 719 # http://clang.llvm.org/cxx_status.html for details 720 clang_version_re = re.compile(".* version (\d+\.\d+)") 721 clang_version_match = clang_version_re.search(CXX_version) 722 if (clang_version_match): 723 clang_version = clang_version_match.groups()[0] 724 if compareVersions(clang_version, "3.1") < 0: 725 print 'Error: clang version 3.1 or newer required.' 726 print ' Installed version:', clang_version 727 Exit(1) 728 else: 729 print 'Error: Unable to determine clang version.' 730 Exit(1) 731 732 # clang has a few additional warnings that we disable, extraneous 733 # parantheses are allowed due to Ruby's printing of the AST, 734 # finally self assignments are allowed as the generated CPU code 735 # is relying on this 736 main.Append(CCFLAGS=['-Wno-parentheses', 737 '-Wno-self-assign', 738 # Some versions of libstdc++ (4.8?) seem to 739 # use struct hash and class hash 740 # interchangeably. 741 '-Wno-mismatched-tags', 742 ]) 743 744 main.Append(TCMALLOC_CCFLAGS=['-fno-builtin']) 745 746 # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as 747 # opposed to libstdc++, as the later is dated. 748 if sys.platform == "darwin": 749 main.Append(CXXFLAGS=['-stdlib=libc++']) 750 main.Append(LIBS=['c++']) 751 752else: 753 print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal, 754 print "Don't know what compiler options to use for your compiler." 755 print termcap.Yellow + ' compiler:' + termcap.Normal, main['CXX'] 756 print termcap.Yellow + ' version:' + termcap.Normal, 757 if not CXX_version: 758 print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\ 759 termcap.Normal 760 else: 761 print CXX_version.replace('\n', '<nl>') 762 print " If you're trying to use a compiler other than GCC" 763 print " or clang, there appears to be something wrong with your" 764 print " environment." 765 print " " 766 print " If you are trying to use a compiler other than those listed" 767 print " above you will need to ease fix SConstruct and " 768 print " src/SConscript to support that compiler." 769 Exit(1) 770 771# Set up common yacc/bison flags (needed for Ruby) 772main['YACCFLAGS'] = '-d' 773main['YACCHXXFILESUFFIX'] = '.hh' 774 775# Do this after we save setting back, or else we'll tack on an 776# extra 'qdo' every time we run scons. 777if main['BATCH']: 778 main['CC'] = main['BATCH_CMD'] + ' ' + main['CC'] 779 main['CXX'] = main['BATCH_CMD'] + ' ' + main['CXX'] 780 main['AS'] = main['BATCH_CMD'] + ' ' + main['AS'] 781 main['AR'] = main['BATCH_CMD'] + ' ' + main['AR'] 782 main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB'] 783 784if sys.platform == 'cygwin': 785 # cygwin has some header file issues... 786 main.Append(CCFLAGS=["-Wno-uninitialized"]) 787 788# Check for the protobuf compiler 789protoc_version = readCommand([main['PROTOC'], '--version'], 790 exception='').split() 791 792# First two words should be "libprotoc x.y.z" 793if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc': 794 print termcap.Yellow + termcap.Bold + \ 795 'Warning: Protocol buffer compiler (protoc) not found.\n' + \ 796 ' Please install protobuf-compiler for tracing support.' + \ 797 termcap.Normal 798 main['PROTOC'] = False 799else: 800 # Based on the availability of the compress stream wrappers, 801 # require 2.1.0 802 min_protoc_version = '2.1.0' 803 if compareVersions(protoc_version[1], min_protoc_version) < 0: 804 print termcap.Yellow + termcap.Bold + \ 805 'Warning: protoc version', min_protoc_version, \ 806 'or newer required.\n' + \ 807 ' Installed version:', protoc_version[1], \ 808 termcap.Normal 809 main['PROTOC'] = False 810 else: 811 # Attempt to determine the appropriate include path and 812 # library path using pkg-config, that means we also need to 813 # check for pkg-config. Note that it is possible to use 814 # protobuf without the involvement of pkg-config. Later on we 815 # check go a library config check and at that point the test 816 # will fail if libprotobuf cannot be found. 817 if readCommand(['pkg-config', '--version'], exception=''): 818 try: 819 # Attempt to establish what linking flags to add for protobuf 820 # using pkg-config 821 main.ParseConfig('pkg-config --cflags --libs-only-L protobuf') 822 except: 823 print termcap.Yellow + termcap.Bold + \ 824 'Warning: pkg-config could not get protobuf flags.' + \ 825 termcap.Normal 826 827# Check for SWIG 828if not main.has_key('SWIG'): 829 print 'Error: SWIG utility not found.' 830 print ' Please install (see http://www.swig.org) and retry.' 831 Exit(1) 832 833# Check for appropriate SWIG version 834swig_version = readCommand([main['SWIG'], '-version'], exception='').split() 835# First 3 words should be "SWIG Version x.y.z" 836if len(swig_version) < 3 or \ 837 swig_version[0] != 'SWIG' or swig_version[1] != 'Version': 838 print 'Error determining SWIG version.' 839 Exit(1) 840 841min_swig_version = '2.0.4' 842if compareVersions(swig_version[2], min_swig_version) < 0: 843 print 'Error: SWIG version', min_swig_version, 'or newer required.' 844 print ' Installed version:', swig_version[2] 845 Exit(1) 846 847# Check for known incompatibilities. The standard library shipped with 848# gcc >= 4.9 does not play well with swig versions prior to 3.0 849if main['GCC'] and compareVersions(gcc_version, '4.9') >= 0 and \ 850 compareVersions(swig_version[2], '3.0') < 0: 851 print termcap.Yellow + termcap.Bold + \ 852 'Warning: This combination of gcc and swig have' + \ 853 ' known incompatibilities.\n' + \ 854 ' If you encounter build problems, please update ' + \ 855 'swig to 3.0 or later.' + \ 856 termcap.Normal 857 858# Set up SWIG flags & scanner 859swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS') 860main.Append(SWIGFLAGS=swig_flags) 861 862# Check for 'timeout' from GNU coreutils. If present, regressions will 863# be run with a time limit. We require version 8.13 since we rely on 864# support for the '--foreground' option. 865timeout_lines = readCommand(['timeout', '--version'], 866 exception='').splitlines() 867# Get the first line and tokenize it 868timeout_version = timeout_lines[0].split() if timeout_lines else [] 869main['TIMEOUT'] = timeout_version and \ 870 compareVersions(timeout_version[-1], '8.13') >= 0 871 872# filter out all existing swig scanners, they mess up the dependency 873# stuff for some reason 874scanners = [] 875for scanner in main['SCANNERS']: 876 skeys = scanner.skeys 877 if skeys == '.i': 878 continue 879 880 if isinstance(skeys, (list, tuple)) and '.i' in skeys: 881 continue 882 883 scanners.append(scanner) 884 885# add the new swig scanner that we like better 886from SCons.Scanner import ClassicCPP as CPPScanner 887swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")' 888scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re)) 889 890# replace the scanners list that has what we want 891main['SCANNERS'] = scanners 892 893# Add a custom Check function to test for structure members. 894def CheckMember(context, include, decl, member, include_quotes="<>"): 895 context.Message("Checking for member %s in %s..." % 896 (member, decl)) 897 text = """ 898#include %(header)s 899int main(){ 900 %(decl)s test; 901 (void)test.%(member)s; 902 return 0; 903}; 904""" % { "header" : include_quotes[0] + include + include_quotes[1], 905 "decl" : decl, 906 "member" : member, 907 } 908 909 ret = context.TryCompile(text, extension=".cc") 910 context.Result(ret) 911 return ret 912 913# Platform-specific configuration. Note again that we assume that all 914# builds under a given build root run on the same host platform. 915conf = Configure(main, 916 conf_dir = joinpath(build_root, '.scons_config'), 917 log_file = joinpath(build_root, 'scons_config.log'), 918 custom_tests = { 919 'CheckMember' : CheckMember, 920 }) 921 922# Check if we should compile a 64 bit binary on Mac OS X/Darwin 923try: 924 import platform 925 uname = platform.uname() 926 if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0: 927 if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]): 928 main.Append(CCFLAGS=['-arch', 'x86_64']) 929 main.Append(CFLAGS=['-arch', 'x86_64']) 930 main.Append(LINKFLAGS=['-arch', 'x86_64']) 931 main.Append(ASFLAGS=['-arch', 'x86_64']) 932except: 933 pass 934 935# Recent versions of scons substitute a "Null" object for Configure() 936# when configuration isn't necessary, e.g., if the "--help" option is 937# present. Unfortuantely this Null object always returns false, 938# breaking all our configuration checks. We replace it with our own 939# more optimistic null object that returns True instead. 940if not conf: 941 def NullCheck(*args, **kwargs): 942 return True 943 944 class NullConf: 945 def __init__(self, env): 946 self.env = env 947 def Finish(self): 948 return self.env 949 def __getattr__(self, mname): 950 return NullCheck 951 952 conf = NullConf(main) 953 954# Cache build files in the supplied directory. 955if main['M5_BUILD_CACHE']: 956 print 'Using build cache located at', main['M5_BUILD_CACHE'] 957 CacheDir(main['M5_BUILD_CACHE']) 958 959if not GetOption('without_python'): 960 # Find Python include and library directories for embedding the 961 # interpreter. We rely on python-config to resolve the appropriate 962 # includes and linker flags. ParseConfig does not seem to understand 963 # the more exotic linker flags such as -Xlinker and -export-dynamic so 964 # we add them explicitly below. If you want to link in an alternate 965 # version of python, see above for instructions on how to invoke 966 # scons with the appropriate PATH set. 967 # 968 # First we check if python2-config exists, else we use python-config 969 python_config = readCommand(['which', 'python2-config'], 970 exception='').strip() 971 if not os.path.exists(python_config): 972 python_config = readCommand(['which', 'python-config'], 973 exception='').strip() 974 py_includes = readCommand([python_config, '--includes'], 975 exception='').split() 976 # Strip the -I from the include folders before adding them to the 977 # CPPPATH 978 main.Append(CPPPATH=map(lambda inc: inc[2:], py_includes)) 979 980 # Read the linker flags and split them into libraries and other link 981 # flags. The libraries are added later through the call the CheckLib. 982 py_ld_flags = readCommand([python_config, '--ldflags'], 983 exception='').split() 984 py_libs = [] 985 for lib in py_ld_flags: 986 if not lib.startswith('-l'): 987 main.Append(LINKFLAGS=[lib]) 988 else: 989 lib = lib[2:] 990 if lib not in py_libs: 991 py_libs.append(lib) 992 993 # verify that this stuff works 994 if not conf.CheckHeader('Python.h', '<>'): 995 print "Error: can't find Python.h header in", py_includes 996 print "Install Python headers (package python-dev on Ubuntu and RedHat)" 997 Exit(1) 998 999 for lib in py_libs: 1000 if not conf.CheckLib(lib): 1001 print "Error: can't find library %s required by python" % lib 1002 Exit(1) 1003 1004# On Solaris you need to use libsocket for socket ops 1005if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1006 if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'): 1007 print "Can't find library with socket calls (e.g. accept())" 1008 Exit(1) 1009 1010# Check for zlib. If the check passes, libz will be automatically 1011# added to the LIBS environment variable. 1012if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'): 1013 print 'Error: did not find needed zlib compression library '\ 1014 'and/or zlib.h header file.' 1015 print ' Please install zlib and try again.' 1016 Exit(1) 1017 1018# If we have the protobuf compiler, also make sure we have the 1019# development libraries. If the check passes, libprotobuf will be 1020# automatically added to the LIBS environment variable. After 1021# this, we can use the HAVE_PROTOBUF flag to determine if we have 1022# got both protoc and libprotobuf available. 1023main['HAVE_PROTOBUF'] = main['PROTOC'] and \ 1024 conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h', 1025 'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;') 1026 1027# If we have the compiler but not the library, print another warning. 1028if main['PROTOC'] and not main['HAVE_PROTOBUF']: 1029 print termcap.Yellow + termcap.Bold + \ 1030 'Warning: did not find protocol buffer library and/or headers.\n' + \ 1031 ' Please install libprotobuf-dev for tracing support.' + \ 1032 termcap.Normal 1033 1034# Check for librt. 1035have_posix_clock = \ 1036 conf.CheckLibWithHeader(None, 'time.h', 'C', 1037 'clock_nanosleep(0,0,NULL,NULL);') or \ 1038 conf.CheckLibWithHeader('rt', 'time.h', 'C', 1039 'clock_nanosleep(0,0,NULL,NULL);') 1040 1041have_posix_timers = \ 1042 conf.CheckLibWithHeader([None, 'rt'], [ 'time.h', 'signal.h' ], 'C', 1043 'timer_create(CLOCK_MONOTONIC, NULL, NULL);') 1044 1045if not GetOption('without_tcmalloc'): 1046 if conf.CheckLib('tcmalloc'): 1047 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1048 elif conf.CheckLib('tcmalloc_minimal'): 1049 main.Append(CCFLAGS=main['TCMALLOC_CCFLAGS']) 1050 else: 1051 print termcap.Yellow + termcap.Bold + \ 1052 "You can get a 12% performance improvement by "\ 1053 "installing tcmalloc (libgoogle-perftools-dev package "\ 1054 "on Ubuntu or RedHat)." + termcap.Normal 1055 1056 1057# Detect back trace implementations. The last implementation in the 1058# list will be used by default. 1059backtrace_impls = [ "none" ] 1060 1061if conf.CheckLibWithHeader(None, 'execinfo.h', 'C', 1062 'backtrace_symbols_fd((void*)0, 0, 0);'): 1063 backtrace_impls.append("glibc") 1064 1065if backtrace_impls[-1] == "none": 1066 default_backtrace_impl = "none" 1067 print termcap.Yellow + termcap.Bold + \ 1068 "No suitable back trace implementation found." + \ 1069 termcap.Normal 1070 1071if not have_posix_clock: 1072 print "Can't find library for POSIX clocks." 1073 1074# Check for <fenv.h> (C99 FP environment control) 1075have_fenv = conf.CheckHeader('fenv.h', '<>') 1076if not have_fenv: 1077 print "Warning: Header file <fenv.h> not found." 1078 print " This host has no IEEE FP rounding mode control." 1079 1080# Check if we should enable KVM-based hardware virtualization. The API 1081# we rely on exists since version 2.6.36 of the kernel, but somehow 1082# the KVM_API_VERSION does not reflect the change. We test for one of 1083# the types as a fall back. 1084have_kvm = conf.CheckHeader('linux/kvm.h', '<>') 1085if not have_kvm: 1086 print "Info: Compatible header file <linux/kvm.h> not found, " \ 1087 "disabling KVM support." 1088 1089# x86 needs support for xsave. We test for the structure here since we 1090# won't be able to run new tests by the time we know which ISA we're 1091# targeting. 1092have_kvm_xsave = conf.CheckTypeSize('struct kvm_xsave', 1093 '#include <linux/kvm.h>') != 0 1094 1095# Check if the requested target ISA is compatible with the host 1096def is_isa_kvm_compatible(isa): 1097 try: 1098 import platform 1099 host_isa = platform.machine() 1100 except: 1101 print "Warning: Failed to determine host ISA." 1102 return False 1103 1104 if not have_posix_timers: 1105 print "Warning: Can not enable KVM, host seems to lack support " \ 1106 "for POSIX timers" 1107 return False 1108 1109 if isa == "arm": 1110 return host_isa in ( "armv7l", "aarch64" ) 1111 elif isa == "x86": 1112 if host_isa != "x86_64": 1113 return False 1114 1115 if not have_kvm_xsave: 1116 print "KVM on x86 requires xsave support in kernel headers." 1117 return False 1118 1119 return True 1120 else: 1121 return False 1122 1123 1124# Check if the exclude_host attribute is available. We want this to 1125# get accurate instruction counts in KVM. 1126main['HAVE_PERF_ATTR_EXCLUDE_HOST'] = conf.CheckMember( 1127 'linux/perf_event.h', 'struct perf_event_attr', 'exclude_host') 1128 1129 1130###################################################################### 1131# 1132# Finish the configuration 1133# 1134main = conf.Finish() 1135 1136###################################################################### 1137# 1138# Collect all non-global variables 1139# 1140 1141# Define the universe of supported ISAs 1142all_isa_list = [ ] 1143all_gpu_isa_list = [ ] 1144Export('all_isa_list') 1145Export('all_gpu_isa_list') 1146 1147class CpuModel(object): 1148 '''The CpuModel class encapsulates everything the ISA parser needs to 1149 know about a particular CPU model.''' 1150 1151 # Dict of available CPU model objects. Accessible as CpuModel.dict. 1152 dict = {} 1153 1154 # Constructor. Automatically adds models to CpuModel.dict. 1155 def __init__(self, name, default=False): 1156 self.name = name # name of model 1157 1158 # This cpu is enabled by default 1159 self.default = default 1160 1161 # Add self to dict 1162 if name in CpuModel.dict: 1163 raise AttributeError, "CpuModel '%s' already registered" % name 1164 CpuModel.dict[name] = self 1165 1166Export('CpuModel') 1167 1168# Sticky variables get saved in the variables file so they persist from 1169# one invocation to the next (unless overridden, in which case the new 1170# value becomes sticky). 1171sticky_vars = Variables(args=ARGUMENTS) 1172Export('sticky_vars') 1173 1174# Sticky variables that should be exported 1175export_vars = [] 1176Export('export_vars') 1177 1178# For Ruby 1179all_protocols = [] 1180Export('all_protocols') 1181protocol_dirs = [] 1182Export('protocol_dirs') 1183slicc_includes = [] 1184Export('slicc_includes') 1185 1186# Walk the tree and execute all SConsopts scripts that wil add to the 1187# above variables 1188if GetOption('verbose'): 1189 print "Reading SConsopts" 1190for bdir in [ base_dir ] + extras_dir_list: 1191 if not isdir(bdir): 1192 print "Error: directory '%s' does not exist" % bdir 1193 Exit(1) 1194 for root, dirs, files in os.walk(bdir): 1195 if 'SConsopts' in files: 1196 if GetOption('verbose'): 1197 print "Reading", joinpath(root, 'SConsopts') 1198 SConscript(joinpath(root, 'SConsopts')) 1199 1200all_isa_list.sort() 1201all_gpu_isa_list.sort() 1202 1203sticky_vars.AddVariables( 1204 EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list), 1205 EnumVariable('TARGET_GPU_ISA', 'Target GPU ISA', 'hsail', all_gpu_isa_list), 1206 ListVariable('CPU_MODELS', 'CPU models', 1207 sorted(n for n,m in CpuModel.dict.iteritems() if m.default), 1208 sorted(CpuModel.dict.keys())), 1209 BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger', 1210 False), 1211 BoolVariable('SS_COMPATIBLE_FP', 1212 'Make floating-point results compatible with SimpleScalar', 1213 False), 1214 BoolVariable('USE_SSE2', 1215 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts', 1216 False), 1217 BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock), 1218 BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv), 1219 BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False), 1220 BoolVariable('USE_KVM', 'Enable hardware virtualized (KVM) CPU models', have_kvm), 1221 BoolVariable('BUILD_GPU', 'Build the compute-GPU model', False), 1222 EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None', 1223 all_protocols), 1224 EnumVariable('BACKTRACE_IMPL', 'Post-mortem dump implementation', 1225 backtrace_impls[-1], backtrace_impls) 1226 ) 1227 1228# These variables get exported to #defines in config/*.hh (see src/SConscript). 1229export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'TARGET_GPU_ISA', 1230 'CP_ANNOTATE', 'USE_POSIX_CLOCK', 'USE_KVM', 'PROTOCOL', 1231 'HAVE_PROTOBUF', 'HAVE_PERF_ATTR_EXCLUDE_HOST'] 1232 1233################################################### 1234# 1235# Define a SCons builder for configuration flag headers. 1236# 1237################################################### 1238 1239# This function generates a config header file that #defines the 1240# variable symbol to the current variable setting (0 or 1). The source 1241# operands are the name of the variable and a Value node containing the 1242# value of the variable. 1243def build_config_file(target, source, env): 1244 (variable, value) = [s.get_contents() for s in source] 1245 f = file(str(target[0]), 'w') 1246 print >> f, '#define', variable, value 1247 f.close() 1248 return None 1249 1250# Combine the two functions into a scons Action object. 1251config_action = MakeAction(build_config_file, Transform("CONFIG H", 2)) 1252 1253# The emitter munges the source & target node lists to reflect what 1254# we're really doing. 1255def config_emitter(target, source, env): 1256 # extract variable name from Builder arg 1257 variable = str(target[0]) 1258 # True target is config header file 1259 target = joinpath('config', variable.lower() + '.hh') 1260 val = env[variable] 1261 if isinstance(val, bool): 1262 # Force value to 0/1 1263 val = int(val) 1264 elif isinstance(val, str): 1265 val = '"' + val + '"' 1266 1267 # Sources are variable name & value (packaged in SCons Value nodes) 1268 return ([target], [Value(variable), Value(val)]) 1269 1270config_builder = Builder(emitter = config_emitter, action = config_action) 1271 1272main.Append(BUILDERS = { 'ConfigFile' : config_builder }) 1273 1274# libelf build is shared across all configs in the build root. 1275main.SConscript('ext/libelf/SConscript', 1276 variant_dir = joinpath(build_root, 'libelf')) 1277 1278# iostream3 build is shared across all configs in the build root. 1279main.SConscript('ext/iostream3/SConscript', 1280 variant_dir = joinpath(build_root, 'iostream3')) 1281 1282# libfdt build is shared across all configs in the build root. 1283main.SConscript('ext/libfdt/SConscript', 1284 variant_dir = joinpath(build_root, 'libfdt')) 1285 1286# fputils build is shared across all configs in the build root. 1287main.SConscript('ext/fputils/SConscript', 1288 variant_dir = joinpath(build_root, 'fputils')) 1289 1290# DRAMSim2 build is shared across all configs in the build root. 1291main.SConscript('ext/dramsim2/SConscript', 1292 variant_dir = joinpath(build_root, 'dramsim2')) 1293 1294# DRAMPower build is shared across all configs in the build root. 1295main.SConscript('ext/drampower/SConscript', 1296 variant_dir = joinpath(build_root, 'drampower')) 1297 1298# nomali build is shared across all configs in the build root. 1299main.SConscript('ext/nomali/SConscript', 1300 variant_dir = joinpath(build_root, 'nomali')) 1301 1302################################################### 1303# 1304# This function is used to set up a directory with switching headers 1305# 1306################################################### 1307 1308main['ALL_ISA_LIST'] = all_isa_list 1309main['ALL_GPU_ISA_LIST'] = all_gpu_isa_list 1310all_isa_deps = {} 1311def make_switching_dir(dname, switch_headers, env): 1312 # Generate the header. target[0] is the full path of the output 1313 # header to generate. 'source' is a dummy variable, since we get the 1314 # list of ISAs from env['ALL_ISA_LIST']. 1315 def gen_switch_hdr(target, source, env): 1316 fname = str(target[0]) 1317 isa = env['TARGET_ISA'].lower() 1318 try: 1319 f = open(fname, 'w') 1320 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1321 f.close() 1322 except IOError: 1323 print "Failed to create %s" % fname 1324 raise 1325 1326 # Build SCons Action object. 'varlist' specifies env vars that this 1327 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1328 # should get re-executed. 1329 switch_hdr_action = MakeAction(gen_switch_hdr, 1330 Transform("GENERATE"), varlist=['ALL_ISA_LIST']) 1331 1332 # Instantiate actions for each header 1333 for hdr in switch_headers: 1334 env.Command(hdr, [], switch_hdr_action) 1335 1336 isa_target = Dir('.').up().name.lower().replace('_', '-') 1337 env['PHONY_BASE'] = '#'+isa_target 1338 all_isa_deps[isa_target] = None 1339 1340Export('make_switching_dir') 1341 1342def make_gpu_switching_dir(dname, switch_headers, env): 1343 # Generate the header. target[0] is the full path of the output 1344 # header to generate. 'source' is a dummy variable, since we get the 1345 # list of ISAs from env['ALL_ISA_LIST']. 1346 def gen_switch_hdr(target, source, env): 1347 fname = str(target[0]) 1348 1349 isa = env['TARGET_GPU_ISA'].lower() 1350 1351 try: 1352 f = open(fname, 'w') 1353 print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname)) 1354 f.close() 1355 except IOError: 1356 print "Failed to create %s" % fname 1357 raise 1358 1359 # Build SCons Action object. 'varlist' specifies env vars that this 1360 # action depends on; when env['ALL_ISA_LIST'] changes these actions 1361 # should get re-executed. 1362 switch_hdr_action = MakeAction(gen_switch_hdr, 1363 Transform("GENERATE"), varlist=['ALL_ISA_GPU_LIST']) 1364 1365 # Instantiate actions for each header 1366 for hdr in switch_headers: 1367 env.Command(hdr, [], switch_hdr_action) 1368 1369Export('make_gpu_switching_dir') 1370 1371# all-isas -> all-deps -> all-environs -> all_targets 1372main.Alias('#all-isas', []) 1373main.Alias('#all-deps', '#all-isas') 1374 1375# Dummy target to ensure all environments are created before telling 1376# SCons what to actually make (the command line arguments). We attach 1377# them to the dependence graph after the environments are complete. 1378ORIG_BUILD_TARGETS = list(BUILD_TARGETS) # force a copy; gets closure to work. 1379def environsComplete(target, source, env): 1380 for t in ORIG_BUILD_TARGETS: 1381 main.Depends('#all-targets', t) 1382 1383# Each build/* switching_dir attaches its *-environs target to #all-environs. 1384main.Append(BUILDERS = {'CompleteEnvirons' : 1385 Builder(action=MakeAction(environsComplete, None))}) 1386main.CompleteEnvirons('#all-environs', []) 1387 1388def doNothing(**ignored): pass 1389main.Append(BUILDERS = {'Dummy': Builder(action=MakeAction(doNothing, None))}) 1390 1391# The final target to which all the original targets ultimately get attached. 1392main.Dummy('#all-targets', '#all-environs') 1393BUILD_TARGETS[:] = ['#all-targets'] 1394 1395################################################### 1396# 1397# Define build environments for selected configurations. 1398# 1399################################################### 1400 1401for variant_path in variant_paths: 1402 if not GetOption('silent'): 1403 print "Building in", variant_path 1404 1405 # Make a copy of the build-root environment to use for this config. 1406 env = main.Clone() 1407 env['BUILDDIR'] = variant_path 1408 1409 # variant_dir is the tail component of build path, and is used to 1410 # determine the build parameters (e.g., 'ALPHA_SE') 1411 (build_root, variant_dir) = splitpath(variant_path) 1412 1413 # Set env variables according to the build directory config. 1414 sticky_vars.files = [] 1415 # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in 1416 # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke 1417 # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings. 1418 current_vars_file = joinpath(build_root, 'variables', variant_dir) 1419 if isfile(current_vars_file): 1420 sticky_vars.files.append(current_vars_file) 1421 if not GetOption('silent'): 1422 print "Using saved variables file %s" % current_vars_file 1423 else: 1424 # Build dir-specific variables file doesn't exist. 1425 1426 # Make sure the directory is there so we can create it later 1427 opt_dir = dirname(current_vars_file) 1428 if not isdir(opt_dir): 1429 mkdir(opt_dir) 1430 1431 # Get default build variables from source tree. Variables are 1432 # normally determined by name of $VARIANT_DIR, but can be 1433 # overridden by '--default=' arg on command line. 1434 default = GetOption('default') 1435 opts_dir = joinpath(main.root.abspath, 'build_opts') 1436 if default: 1437 default_vars_files = [joinpath(build_root, 'variables', default), 1438 joinpath(opts_dir, default)] 1439 else: 1440 default_vars_files = [joinpath(opts_dir, variant_dir)] 1441 existing_files = filter(isfile, default_vars_files) 1442 if existing_files: 1443 default_vars_file = existing_files[0] 1444 sticky_vars.files.append(default_vars_file) 1445 print "Variables file %s not found,\n using defaults in %s" \ 1446 % (current_vars_file, default_vars_file) 1447 else: 1448 print "Error: cannot find variables file %s or " \ 1449 "default file(s) %s" \ 1450 % (current_vars_file, ' or '.join(default_vars_files)) 1451 Exit(1) 1452 1453 # Apply current variable settings to env 1454 sticky_vars.Update(env) 1455 1456 help_texts["local_vars"] += \ 1457 "Build variables for %s:\n" % variant_dir \ 1458 + sticky_vars.GenerateHelpText(env) 1459 1460 # Process variable settings. 1461 1462 if not have_fenv and env['USE_FENV']: 1463 print "Warning: <fenv.h> not available; " \ 1464 "forcing USE_FENV to False in", variant_dir + "." 1465 env['USE_FENV'] = False 1466 1467 if not env['USE_FENV']: 1468 print "Warning: No IEEE FP rounding mode control in", variant_dir + "." 1469 print " FP results may deviate slightly from other platforms." 1470 1471 if env['EFENCE']: 1472 env.Append(LIBS=['efence']) 1473 1474 if env['USE_KVM']: 1475 if not have_kvm: 1476 print "Warning: Can not enable KVM, host seems to lack KVM support" 1477 env['USE_KVM'] = False 1478 elif not is_isa_kvm_compatible(env['TARGET_ISA']): 1479 print "Info: KVM support disabled due to unsupported host and " \ 1480 "target ISA combination" 1481 env['USE_KVM'] = False 1482 1483 # Warn about missing optional functionality 1484 if env['USE_KVM']: 1485 if not main['HAVE_PERF_ATTR_EXCLUDE_HOST']: 1486 print "Warning: perf_event headers lack support for the " \ 1487 "exclude_host attribute. KVM instruction counts will " \ 1488 "be inaccurate." 1489 1490 # Save sticky variable settings back to current variables file 1491 sticky_vars.Save(current_vars_file, env) 1492 1493 if env['USE_SSE2']: 1494 env.Append(CCFLAGS=['-msse2']) 1495 1496 # The src/SConscript file sets up the build rules in 'env' according 1497 # to the configured variables. It returns a list of environments, 1498 # one for each variant build (debug, opt, etc.) 1499 SConscript('src/SConscript', variant_dir = variant_path, exports = 'env') 1500 1501def pairwise(iterable): 1502 "s -> (s0,s1), (s1,s2), (s2, s3), ..." 1503 a, b = itertools.tee(iterable) 1504 b.next() 1505 return itertools.izip(a, b) 1506 1507# Create false dependencies so SCons will parse ISAs, establish 1508# dependencies, and setup the build Environments serially. Either 1509# SCons (likely) and/or our SConscripts (possibly) cannot cope with -j 1510# greater than 1. It appears to be standard race condition stuff; it 1511# doesn't always fail, but usually, and the behaviors are different. 1512# Every time I tried to remove this, builds would fail in some 1513# creative new way. So, don't do that. You'll want to, though, because 1514# tests/SConscript takes a long time to make its Environments. 1515for t1, t2 in pairwise(sorted(all_isa_deps.iterkeys())): 1516 main.Depends('#%s-deps' % t2, '#%s-deps' % t1) 1517 main.Depends('#%s-environs' % t2, '#%s-environs' % t1) 1518 1519# base help text 1520Help(''' 1521Usage: scons [scons options] [build variables] [target(s)] 1522 1523Extra scons options: 1524%(options)s 1525 1526Global build variables: 1527%(global_vars)s 1528 1529%(local_vars)s 1530''' % help_texts) 1531