SConstruct revision 9537
1# -*- mode:python -*-
2
3# Copyright (c) 2011 Advanced Micro Devices, Inc.
4# Copyright (c) 2009 The Hewlett-Packard Development Company
5# Copyright (c) 2004-2005 The Regents of The University of Michigan
6# All rights reserved.
7#
8# Redistribution and use in source and binary forms, with or without
9# modification, are permitted provided that the following conditions are
10# met: redistributions of source code must retain the above copyright
11# notice, this list of conditions and the following disclaimer;
12# redistributions in binary form must reproduce the above copyright
13# notice, this list of conditions and the following disclaimer in the
14# documentation and/or other materials provided with the distribution;
15# neither the name of the copyright holders nor the names of its
16# contributors may be used to endorse or promote products derived from
17# this software without specific prior written permission.
18#
19# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
20# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
21# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
22# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
23# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
24# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
25# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
27# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
29# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30#
31# Authors: Steve Reinhardt
32#          Nathan Binkert
33
34###################################################
35#
36# SCons top-level build description (SConstruct) file.
37#
38# While in this directory ('gem5'), just type 'scons' to build the default
39# configuration (see below), or type 'scons build/<CONFIG>/<binary>'
40# to build some other configuration (e.g., 'build/ALPHA/gem5.opt' for
41# the optimized full-system version).
42#
43# You can build gem5 in a different directory as long as there is a
44# 'build/<CONFIG>' somewhere along the target path.  The build system
45# expects that all configs under the same build directory are being
46# built for the same host system.
47#
48# Examples:
49#
50#   The following two commands are equivalent.  The '-u' option tells
51#   scons to search up the directory tree for this SConstruct file.
52#   % cd <path-to-src>/gem5 ; scons build/ALPHA/gem5.debug
53#   % cd <path-to-src>/gem5/build/ALPHA; scons -u gem5.debug
54#
55#   The following two commands are equivalent and demonstrate building
56#   in a directory outside of the source tree.  The '-C' option tells
57#   scons to chdir to the specified directory to find this SConstruct
58#   file.
59#   % cd <path-to-src>/gem5 ; scons /local/foo/build/ALPHA/gem5.debug
60#   % cd /local/foo/build/ALPHA; scons -C <path-to-src>/gem5 gem5.debug
61#
62# You can use 'scons -H' to print scons options.  If you're in this
63# 'gem5' directory (or use -u or -C to tell scons where to find this
64# file), you can use 'scons -h' to print all the gem5-specific build
65# options as well.
66#
67###################################################
68
69# Check for recent-enough Python and SCons versions.
70try:
71    # Really old versions of scons only take two options for the
72    # function, so check once without the revision and once with the
73    # revision, the first instance will fail for stuff other than
74    # 0.98, and the second will fail for 0.98.0
75    EnsureSConsVersion(0, 98)
76    EnsureSConsVersion(0, 98, 1)
77except SystemExit, e:
78    print """
79For more details, see:
80    http://gem5.org/Dependencies
81"""
82    raise
83
84# We ensure the python version early because we have stuff that
85# requires python 2.4
86try:
87    EnsurePythonVersion(2, 4)
88except SystemExit, e:
89    print """
90You can use a non-default installation of the Python interpreter by
91either (1) rearranging your PATH so that scons finds the non-default
92'python' first or (2) explicitly invoking an alternative interpreter
93on the scons script.
94
95For more details, see:
96    http://gem5.org/wiki/index.php/Using_a_non-default_Python_installation
97"""
98    raise
99
100# Global Python includes
101import os
102import re
103import subprocess
104import sys
105
106from os import mkdir, environ
107from os.path import abspath, basename, dirname, expanduser, normpath
108from os.path import exists,  isdir, isfile
109from os.path import join as joinpath, split as splitpath
110
111# SCons includes
112import SCons
113import SCons.Node
114
115extra_python_paths = [
116    Dir('src/python').srcnode().abspath, # gem5 includes
117    Dir('ext/ply').srcnode().abspath, # ply is used by several files
118    ]
119
120sys.path[1:1] = extra_python_paths
121
122from m5.util import compareVersions, readCommand
123from m5.util.terminal import get_termcap
124
125help_texts = {
126    "options" : "",
127    "global_vars" : "",
128    "local_vars" : ""
129}
130
131Export("help_texts")
132
133
134# There's a bug in scons in that (1) by default, the help texts from
135# AddOption() are supposed to be displayed when you type 'scons -h'
136# and (2) you can override the help displayed by 'scons -h' using the
137# Help() function, but these two features are incompatible: once
138# you've overridden the help text using Help(), there's no way to get
139# at the help texts from AddOptions.  See:
140#     http://scons.tigris.org/issues/show_bug.cgi?id=2356
141#     http://scons.tigris.org/issues/show_bug.cgi?id=2611
142# This hack lets us extract the help text from AddOptions and
143# re-inject it via Help().  Ideally someday this bug will be fixed and
144# we can just use AddOption directly.
145def AddLocalOption(*args, **kwargs):
146    col_width = 30
147
148    help = "  " + ", ".join(args)
149    if "help" in kwargs:
150        length = len(help)
151        if length >= col_width:
152            help += "\n" + " " * col_width
153        else:
154            help += " " * (col_width - length)
155        help += kwargs["help"]
156    help_texts["options"] += help + "\n"
157
158    AddOption(*args, **kwargs)
159
160AddLocalOption('--colors', dest='use_colors', action='store_true',
161               help="Add color to abbreviated scons output")
162AddLocalOption('--no-colors', dest='use_colors', action='store_false',
163               help="Don't add color to abbreviated scons output")
164AddLocalOption('--default', dest='default', type='string', action='store',
165               help='Override which build_opts file to use for defaults')
166AddLocalOption('--ignore-style', dest='ignore_style', action='store_true',
167               help='Disable style checking hooks')
168AddLocalOption('--no-lto', dest='no_lto', action='store_true',
169               help='Disable Link-Time Optimization for fast')
170AddLocalOption('--update-ref', dest='update_ref', action='store_true',
171               help='Update test reference outputs')
172AddLocalOption('--verbose', dest='verbose', action='store_true',
173               help='Print full tool command lines')
174
175termcap = get_termcap(GetOption('use_colors'))
176
177########################################################################
178#
179# Set up the main build environment.
180#
181########################################################################
182use_vars = set([ 'AS', 'AR', 'CC', 'CXX', 'HOME', 'LD_LIBRARY_PATH',
183                 'LIBRARY_PATH', 'PATH', 'PKG_CONFIG_PATH', 'PYTHONPATH',
184                 'RANLIB', 'SWIG' ])
185
186use_prefixes = [
187    "M5",           # M5 configuration (e.g., path to kernels)
188    "DISTCC_",      # distcc (distributed compiler wrapper) configuration
189    "CCACHE_",      # ccache (caching compiler wrapper) configuration
190    "CCC_",         # clang static analyzer configuration
191    ]
192
193use_env = {}
194for key,val in os.environ.iteritems():
195    if key in use_vars or \
196            any([key.startswith(prefix) for prefix in use_prefixes]):
197        use_env[key] = val
198
199main = Environment(ENV=use_env)
200main.Decider('MD5-timestamp')
201main.root = Dir(".")         # The current directory (where this file lives).
202main.srcdir = Dir("src")     # The source directory
203
204main_dict_keys = main.Dictionary().keys()
205
206# Check that we have a C/C++ compiler
207if not ('CC' in main_dict_keys and 'CXX' in main_dict_keys):
208    print "No C++ compiler installed (package g++ on Ubuntu and RedHat)"
209    Exit(1)
210
211# Check that swig is present
212if not 'SWIG' in main_dict_keys:
213    print "swig is not installed (package swig on Ubuntu and RedHat)"
214    Exit(1)
215
216# add useful python code PYTHONPATH so it can be used by subprocesses
217# as well
218main.AppendENVPath('PYTHONPATH', extra_python_paths)
219
220########################################################################
221#
222# Mercurial Stuff.
223#
224# If the gem5 directory is a mercurial repository, we should do some
225# extra things.
226#
227########################################################################
228
229hgdir = main.root.Dir(".hg")
230
231mercurial_style_message = """
232You're missing the gem5 style hook, which automatically checks your code
233against the gem5 style rules on hg commit and qrefresh commands.  This
234script will now install the hook in your .hg/hgrc file.
235Press enter to continue, or ctrl-c to abort: """
236
237mercurial_style_hook = """
238# The following lines were automatically added by gem5/SConstruct
239# to provide the gem5 style-checking hooks
240[extensions]
241style = %s/util/style.py
242
243[hooks]
244pretxncommit.style = python:style.check_style
245pre-qrefresh.style = python:style.check_style
246# End of SConstruct additions
247
248""" % (main.root.abspath)
249
250mercurial_lib_not_found = """
251Mercurial libraries cannot be found, ignoring style hook.  If
252you are a gem5 developer, please fix this and run the style
253hook. It is important.
254"""
255
256# Check for style hook and prompt for installation if it's not there.
257# Skip this if --ignore-style was specified, there's no .hg dir to
258# install a hook in, or there's no interactive terminal to prompt.
259if not GetOption('ignore_style') and hgdir.exists() and sys.stdin.isatty():
260    style_hook = True
261    try:
262        from mercurial import ui
263        ui = ui.ui()
264        ui.readconfig(hgdir.File('hgrc').abspath)
265        style_hook = ui.config('hooks', 'pretxncommit.style', None) and \
266                     ui.config('hooks', 'pre-qrefresh.style', None)
267    except ImportError:
268        print mercurial_lib_not_found
269
270    if not style_hook:
271        print mercurial_style_message,
272        # continue unless user does ctrl-c/ctrl-d etc.
273        try:
274            raw_input()
275        except:
276            print "Input exception, exiting scons.\n"
277            sys.exit(1)
278        hgrc_path = '%s/.hg/hgrc' % main.root.abspath
279        print "Adding style hook to", hgrc_path, "\n"
280        try:
281            hgrc = open(hgrc_path, 'a')
282            hgrc.write(mercurial_style_hook)
283            hgrc.close()
284        except:
285            print "Error updating", hgrc_path
286            sys.exit(1)
287
288
289###################################################
290#
291# Figure out which configurations to set up based on the path(s) of
292# the target(s).
293#
294###################################################
295
296# Find default configuration & binary.
297Default(environ.get('M5_DEFAULT_BINARY', 'build/ALPHA/gem5.debug'))
298
299# helper function: find last occurrence of element in list
300def rfind(l, elt, offs = -1):
301    for i in range(len(l)+offs, 0, -1):
302        if l[i] == elt:
303            return i
304    raise ValueError, "element not found"
305
306# Take a list of paths (or SCons Nodes) and return a list with all
307# paths made absolute and ~-expanded.  Paths will be interpreted
308# relative to the launch directory unless a different root is provided
309def makePathListAbsolute(path_list, root=GetLaunchDir()):
310    return [abspath(joinpath(root, expanduser(str(p))))
311            for p in path_list]
312
313# Each target must have 'build' in the interior of the path; the
314# directory below this will determine the build parameters.  For
315# example, for target 'foo/bar/build/ALPHA_SE/arch/alpha/blah.do' we
316# recognize that ALPHA_SE specifies the configuration because it
317# follow 'build' in the build path.
318
319# The funky assignment to "[:]" is needed to replace the list contents
320# in place rather than reassign the symbol to a new list, which
321# doesn't work (obviously!).
322BUILD_TARGETS[:] = makePathListAbsolute(BUILD_TARGETS)
323
324# Generate a list of the unique build roots and configs that the
325# collected targets reference.
326variant_paths = []
327build_root = None
328for t in BUILD_TARGETS:
329    path_dirs = t.split('/')
330    try:
331        build_top = rfind(path_dirs, 'build', -2)
332    except:
333        print "Error: no non-leaf 'build' dir found on target path", t
334        Exit(1)
335    this_build_root = joinpath('/',*path_dirs[:build_top+1])
336    if not build_root:
337        build_root = this_build_root
338    else:
339        if this_build_root != build_root:
340            print "Error: build targets not under same build root\n"\
341                  "  %s\n  %s" % (build_root, this_build_root)
342            Exit(1)
343    variant_path = joinpath('/',*path_dirs[:build_top+2])
344    if variant_path not in variant_paths:
345        variant_paths.append(variant_path)
346
347# Make sure build_root exists (might not if this is the first build there)
348if not isdir(build_root):
349    mkdir(build_root)
350main['BUILDROOT'] = build_root
351
352Export('main')
353
354main.SConsignFile(joinpath(build_root, "sconsign"))
355
356# Default duplicate option is to use hard links, but this messes up
357# when you use emacs to edit a file in the target dir, as emacs moves
358# file to file~ then copies to file, breaking the link.  Symbolic
359# (soft) links work better.
360main.SetOption('duplicate', 'soft-copy')
361
362#
363# Set up global sticky variables... these are common to an entire build
364# tree (not specific to a particular build like ALPHA_SE)
365#
366
367global_vars_file = joinpath(build_root, 'variables.global')
368
369global_vars = Variables(global_vars_file, args=ARGUMENTS)
370
371global_vars.AddVariables(
372    ('CC', 'C compiler', environ.get('CC', main['CC'])),
373    ('CXX', 'C++ compiler', environ.get('CXX', main['CXX'])),
374    ('SWIG', 'SWIG tool', environ.get('SWIG', main['SWIG'])),
375    ('PROTOC', 'protoc tool', environ.get('PROTOC', 'protoc')),
376    ('BATCH', 'Use batch pool for build and tests', False),
377    ('BATCH_CMD', 'Batch pool submission command name', 'qdo'),
378    ('M5_BUILD_CACHE', 'Cache built objects in this directory', False),
379    ('EXTRAS', 'Add extra directories to the compilation', '')
380    )
381
382# Update main environment with values from ARGUMENTS & global_vars_file
383global_vars.Update(main)
384help_texts["global_vars"] += global_vars.GenerateHelpText(main)
385
386# Save sticky variable settings back to current variables file
387global_vars.Save(global_vars_file, main)
388
389# Parse EXTRAS variable to build list of all directories where we're
390# look for sources etc.  This list is exported as extras_dir_list.
391base_dir = main.srcdir.abspath
392if main['EXTRAS']:
393    extras_dir_list = makePathListAbsolute(main['EXTRAS'].split(':'))
394else:
395    extras_dir_list = []
396
397Export('base_dir')
398Export('extras_dir_list')
399
400# the ext directory should be on the #includes path
401main.Append(CPPPATH=[Dir('ext')])
402
403def strip_build_path(path, env):
404    path = str(path)
405    variant_base = env['BUILDROOT'] + os.path.sep
406    if path.startswith(variant_base):
407        path = path[len(variant_base):]
408    elif path.startswith('build/'):
409        path = path[6:]
410    return path
411
412# Generate a string of the form:
413#   common/path/prefix/src1, src2 -> tgt1, tgt2
414# to print while building.
415class Transform(object):
416    # all specific color settings should be here and nowhere else
417    tool_color = termcap.Normal
418    pfx_color = termcap.Yellow
419    srcs_color = termcap.Yellow + termcap.Bold
420    arrow_color = termcap.Blue + termcap.Bold
421    tgts_color = termcap.Yellow + termcap.Bold
422
423    def __init__(self, tool, max_sources=99):
424        self.format = self.tool_color + (" [%8s] " % tool) \
425                      + self.pfx_color + "%s" \
426                      + self.srcs_color + "%s" \
427                      + self.arrow_color + " -> " \
428                      + self.tgts_color + "%s" \
429                      + termcap.Normal
430        self.max_sources = max_sources
431
432    def __call__(self, target, source, env, for_signature=None):
433        # truncate source list according to max_sources param
434        source = source[0:self.max_sources]
435        def strip(f):
436            return strip_build_path(str(f), env)
437        if len(source) > 0:
438            srcs = map(strip, source)
439        else:
440            srcs = ['']
441        tgts = map(strip, target)
442        # surprisingly, os.path.commonprefix is a dumb char-by-char string
443        # operation that has nothing to do with paths.
444        com_pfx = os.path.commonprefix(srcs + tgts)
445        com_pfx_len = len(com_pfx)
446        if com_pfx:
447            # do some cleanup and sanity checking on common prefix
448            if com_pfx[-1] == ".":
449                # prefix matches all but file extension: ok
450                # back up one to change 'foo.cc -> o' to 'foo.cc -> .o'
451                com_pfx = com_pfx[0:-1]
452            elif com_pfx[-1] == "/":
453                # common prefix is directory path: OK
454                pass
455            else:
456                src0_len = len(srcs[0])
457                tgt0_len = len(tgts[0])
458                if src0_len == com_pfx_len:
459                    # source is a substring of target, OK
460                    pass
461                elif tgt0_len == com_pfx_len:
462                    # target is a substring of source, need to back up to
463                    # avoid empty string on RHS of arrow
464                    sep_idx = com_pfx.rfind(".")
465                    if sep_idx != -1:
466                        com_pfx = com_pfx[0:sep_idx]
467                    else:
468                        com_pfx = ''
469                elif src0_len > com_pfx_len and srcs[0][com_pfx_len] == ".":
470                    # still splitting at file extension: ok
471                    pass
472                else:
473                    # probably a fluke; ignore it
474                    com_pfx = ''
475        # recalculate length in case com_pfx was modified
476        com_pfx_len = len(com_pfx)
477        def fmt(files):
478            f = map(lambda s: s[com_pfx_len:], files)
479            return ', '.join(f)
480        return self.format % (com_pfx, fmt(srcs), fmt(tgts))
481
482Export('Transform')
483
484# enable the regression script to use the termcap
485main['TERMCAP'] = termcap
486
487if GetOption('verbose'):
488    def MakeAction(action, string, *args, **kwargs):
489        return Action(action, *args, **kwargs)
490else:
491    MakeAction = Action
492    main['CCCOMSTR']        = Transform("CC")
493    main['CXXCOMSTR']       = Transform("CXX")
494    main['ASCOMSTR']        = Transform("AS")
495    main['SWIGCOMSTR']      = Transform("SWIG")
496    main['ARCOMSTR']        = Transform("AR", 0)
497    main['LINKCOMSTR']      = Transform("LINK", 0)
498    main['RANLIBCOMSTR']    = Transform("RANLIB", 0)
499    main['M4COMSTR']        = Transform("M4")
500    main['SHCCCOMSTR']      = Transform("SHCC")
501    main['SHCXXCOMSTR']     = Transform("SHCXX")
502Export('MakeAction')
503
504# Initialize the Link-Time Optimization (LTO) flags
505main['LTO_CCFLAGS'] = []
506main['LTO_LDFLAGS'] = []
507
508CXX_version = readCommand([main['CXX'],'--version'], exception=False)
509CXX_V = readCommand([main['CXX'],'-V'], exception=False)
510
511main['GCC'] = CXX_version and CXX_version.find('g++') >= 0
512main['CLANG'] = CXX_version and CXX_version.find('clang') >= 0
513if main['GCC'] + main['CLANG'] > 1:
514    print 'Error: How can we have two at the same time?'
515    Exit(1)
516
517# Set up default C++ compiler flags
518if main['GCC']:
519    # Check for a supported version of gcc, >= 4.4 is needed for c++0x
520    # support. See http://gcc.gnu.org/projects/cxx0x.html for details
521    gcc_version = readCommand([main['CXX'], '-dumpversion'], exception=False)
522    if compareVersions(gcc_version, "4.4") < 0:
523        print 'Error: gcc version 4.4 or newer required.'
524        print '       Installed version:', gcc_version
525        Exit(1)
526
527    main['GCC_VERSION'] = gcc_version
528    main.Append(CCFLAGS=['-pipe'])
529    main.Append(CCFLAGS=['-fno-strict-aliasing'])
530    main.Append(CCFLAGS=['-Wall', '-Wno-sign-compare', '-Wundef'])
531    main.Append(CXXFLAGS=['-std=c++0x'])
532
533    # Check for versions with bugs
534    if not compareVersions(gcc_version, '4.4.1') or \
535       not compareVersions(gcc_version, '4.4.2'):
536        print 'Info: Tree vectorizer in GCC 4.4.1 & 4.4.2 is buggy, disabling.'
537        main.Append(CCFLAGS=['-fno-tree-vectorize'])
538
539    # LTO support is only really working properly from 4.6 and beyond
540    if compareVersions(gcc_version, '4.6') >= 0:
541        # Add the appropriate Link-Time Optimization (LTO) flags
542        # unless LTO is explicitly turned off. Note that these flags
543        # are only used by the fast target.
544        if not GetOption('no_lto'):
545            # Pass the LTO flag when compiling to produce GIMPLE
546            # output, we merely create the flags here and only append
547            # them later/
548            main['LTO_CCFLAGS'] = ['-flto=%d' % GetOption('num_jobs')]
549
550            # Use the same amount of jobs for LTO as we are running
551            # scons with, we hardcode the use of the linker plugin
552            # which requires either gold or GNU ld >= 2.21
553            main['LTO_LDFLAGS'] = ['-flto=%d' % GetOption('num_jobs'),
554                                   '-fuse-linker-plugin']
555
556elif main['CLANG']:
557    # Check for a supported version of clang, >= 2.9 is needed to
558    # support similar features as gcc 4.4. See
559    # http://clang.llvm.org/cxx_status.html for details
560    clang_version_re = re.compile(".* version (\d+\.\d+)")
561    clang_version_match = clang_version_re.match(CXX_version)
562    if (clang_version_match):
563        clang_version = clang_version_match.groups()[0]
564        if compareVersions(clang_version, "2.9") < 0:
565            print 'Error: clang version 2.9 or newer required.'
566            print '       Installed version:', clang_version
567            Exit(1)
568    else:
569        print 'Error: Unable to determine clang version.'
570        Exit(1)
571
572    main.Append(CCFLAGS=['-pipe'])
573    main.Append(CCFLAGS=['-fno-strict-aliasing'])
574    main.Append(CCFLAGS=['-Wall', '-Wno-sign-compare', '-Wundef'])
575    main.Append(CCFLAGS=['-Wno-tautological-compare'])
576    main.Append(CCFLAGS=['-Wno-self-assign'])
577    # Ruby makes frequent use of extraneous parantheses in the printing
578    # of if-statements
579    main.Append(CCFLAGS=['-Wno-parentheses'])
580    main.Append(CXXFLAGS=['-std=c++0x'])
581    # On Mac OS X/Darwin we need to also use libc++ (part of XCode) as
582    # opposed to libstdc++ to make the transition from TR1 to
583    # C++11. See http://libcxx.llvm.org. However, clang has chosen a
584    # strict implementation of the C++11 standard, and does not allow
585    # incomplete types in template arguments (besides unique_ptr and
586    # shared_ptr), and the libc++ STL containers create problems in
587    # combination with the current gem5 code. For now, we stick with
588    # libstdc++ and use the TR1 namespace.
589    # if sys.platform == "darwin":
590    #     main.Append(CXXFLAGS=['-stdlib=libc++'])
591
592else:
593    print termcap.Yellow + termcap.Bold + 'Error' + termcap.Normal,
594    print "Don't know what compiler options to use for your compiler."
595    print termcap.Yellow + '       compiler:' + termcap.Normal, main['CXX']
596    print termcap.Yellow + '       version:' + termcap.Normal,
597    if not CXX_version:
598        print termcap.Yellow + termcap.Bold + "COMMAND NOT FOUND!" +\
599               termcap.Normal
600    else:
601        print CXX_version.replace('\n', '<nl>')
602    print "       If you're trying to use a compiler other than GCC"
603    print "       or clang, there appears to be something wrong with your"
604    print "       environment."
605    print "       "
606    print "       If you are trying to use a compiler other than those listed"
607    print "       above you will need to ease fix SConstruct and "
608    print "       src/SConscript to support that compiler."
609    Exit(1)
610
611# Set up common yacc/bison flags (needed for Ruby)
612main['YACCFLAGS'] = '-d'
613main['YACCHXXFILESUFFIX'] = '.hh'
614
615# Do this after we save setting back, or else we'll tack on an
616# extra 'qdo' every time we run scons.
617if main['BATCH']:
618    main['CC']     = main['BATCH_CMD'] + ' ' + main['CC']
619    main['CXX']    = main['BATCH_CMD'] + ' ' + main['CXX']
620    main['AS']     = main['BATCH_CMD'] + ' ' + main['AS']
621    main['AR']     = main['BATCH_CMD'] + ' ' + main['AR']
622    main['RANLIB'] = main['BATCH_CMD'] + ' ' + main['RANLIB']
623
624if sys.platform == 'cygwin':
625    # cygwin has some header file issues...
626    main.Append(CCFLAGS=["-Wno-uninitialized"])
627
628# Check for the protobuf compiler
629protoc_version = readCommand([main['PROTOC'], '--version'],
630                             exception='').split()
631
632# First two words should be "libprotoc x.y.z"
633if len(protoc_version) < 2 or protoc_version[0] != 'libprotoc':
634    print termcap.Yellow + termcap.Bold + \
635        'Warning: Protocol buffer compiler (protoc) not found.\n' + \
636        '         Please install protobuf-compiler for tracing support.' + \
637        termcap.Normal
638    main['PROTOC'] = False
639else:
640    # Based on the availability of the compress stream wrappers,
641    # require 2.1.0
642    min_protoc_version = '2.1.0'
643    if compareVersions(protoc_version[1], min_protoc_version) < 0:
644        print termcap.Yellow + termcap.Bold + \
645            'Warning: protoc version', min_protoc_version, \
646            'or newer required.\n' + \
647            '         Installed version:', protoc_version[1], \
648            termcap.Normal
649        main['PROTOC'] = False
650    else:
651        # Attempt to determine the appropriate include path and
652        # library path using pkg-config, that means we also need to
653        # check for pkg-config. Note that it is possible to use
654        # protobuf without the involvement of pkg-config. Later on we
655        # check go a library config check and at that point the test
656        # will fail if libprotobuf cannot be found.
657        if readCommand(['pkg-config', '--version'], exception=''):
658            try:
659                # Attempt to establish what linking flags to add for protobuf
660                # using pkg-config
661                main.ParseConfig('pkg-config --cflags --libs-only-L protobuf')
662            except:
663                print termcap.Yellow + termcap.Bold + \
664                    'Warning: pkg-config could not get protobuf flags.' + \
665                    termcap.Normal
666
667# Check for SWIG
668if not main.has_key('SWIG'):
669    print 'Error: SWIG utility not found.'
670    print '       Please install (see http://www.swig.org) and retry.'
671    Exit(1)
672
673# Check for appropriate SWIG version
674swig_version = readCommand([main['SWIG'], '-version'], exception='').split()
675# First 3 words should be "SWIG Version x.y.z"
676if len(swig_version) < 3 or \
677        swig_version[0] != 'SWIG' or swig_version[1] != 'Version':
678    print 'Error determining SWIG version.'
679    Exit(1)
680
681min_swig_version = '1.3.34'
682if compareVersions(swig_version[2], min_swig_version) < 0:
683    print 'Error: SWIG version', min_swig_version, 'or newer required.'
684    print '       Installed version:', swig_version[2]
685    Exit(1)
686
687# Set up SWIG flags & scanner
688swig_flags=Split('-c++ -python -modern -templatereduce $_CPPINCFLAGS')
689main.Append(SWIGFLAGS=swig_flags)
690
691# filter out all existing swig scanners, they mess up the dependency
692# stuff for some reason
693scanners = []
694for scanner in main['SCANNERS']:
695    skeys = scanner.skeys
696    if skeys == '.i':
697        continue
698
699    if isinstance(skeys, (list, tuple)) and '.i' in skeys:
700        continue
701
702    scanners.append(scanner)
703
704# add the new swig scanner that we like better
705from SCons.Scanner import ClassicCPP as CPPScanner
706swig_inc_re = '^[ \t]*[%,#][ \t]*(?:include|import)[ \t]*(<|")([^>"]+)(>|")'
707scanners.append(CPPScanner("SwigScan", [ ".i" ], "CPPPATH", swig_inc_re))
708
709# replace the scanners list that has what we want
710main['SCANNERS'] = scanners
711
712# Add a custom Check function to the Configure context so that we can
713# figure out if the compiler adds leading underscores to global
714# variables.  This is needed for the autogenerated asm files that we
715# use for embedding the python code.
716def CheckLeading(context):
717    context.Message("Checking for leading underscore in global variables...")
718    # 1) Define a global variable called x from asm so the C compiler
719    #    won't change the symbol at all.
720    # 2) Declare that variable.
721    # 3) Use the variable
722    #
723    # If the compiler prepends an underscore, this will successfully
724    # link because the external symbol 'x' will be called '_x' which
725    # was defined by the asm statement.  If the compiler does not
726    # prepend an underscore, this will not successfully link because
727    # '_x' will have been defined by assembly, while the C portion of
728    # the code will be trying to use 'x'
729    ret = context.TryLink('''
730        asm(".globl _x; _x: .byte 0");
731        extern int x;
732        int main() { return x; }
733        ''', extension=".c")
734    context.env.Append(LEADING_UNDERSCORE=ret)
735    context.Result(ret)
736    return ret
737
738# Platform-specific configuration.  Note again that we assume that all
739# builds under a given build root run on the same host platform.
740conf = Configure(main,
741                 conf_dir = joinpath(build_root, '.scons_config'),
742                 log_file = joinpath(build_root, 'scons_config.log'),
743                 custom_tests = { 'CheckLeading' : CheckLeading })
744
745# Check for leading underscores.  Don't really need to worry either
746# way so don't need to check the return code.
747conf.CheckLeading()
748
749# Check if we should compile a 64 bit binary on Mac OS X/Darwin
750try:
751    import platform
752    uname = platform.uname()
753    if uname[0] == 'Darwin' and compareVersions(uname[2], '9.0.0') >= 0:
754        if int(readCommand('sysctl -n hw.cpu64bit_capable')[0]):
755            main.Append(CCFLAGS=['-arch', 'x86_64'])
756            main.Append(CFLAGS=['-arch', 'x86_64'])
757            main.Append(LINKFLAGS=['-arch', 'x86_64'])
758            main.Append(ASFLAGS=['-arch', 'x86_64'])
759except:
760    pass
761
762# Recent versions of scons substitute a "Null" object for Configure()
763# when configuration isn't necessary, e.g., if the "--help" option is
764# present.  Unfortuantely this Null object always returns false,
765# breaking all our configuration checks.  We replace it with our own
766# more optimistic null object that returns True instead.
767if not conf:
768    def NullCheck(*args, **kwargs):
769        return True
770
771    class NullConf:
772        def __init__(self, env):
773            self.env = env
774        def Finish(self):
775            return self.env
776        def __getattr__(self, mname):
777            return NullCheck
778
779    conf = NullConf(main)
780
781# Find Python include and library directories for embedding the
782# interpreter.  For consistency, we will use the same Python
783# installation used to run scons (and thus this script).  If you want
784# to link in an alternate version, see above for instructions on how
785# to invoke scons with a different copy of the Python interpreter.
786from distutils import sysconfig
787
788py_getvar = sysconfig.get_config_var
789
790py_debug = getattr(sys, 'pydebug', False)
791py_version = 'python' + py_getvar('VERSION') + (py_debug and "_d" or "")
792
793py_general_include = sysconfig.get_python_inc()
794py_platform_include = sysconfig.get_python_inc(plat_specific=True)
795py_includes = [ py_general_include ]
796if py_platform_include != py_general_include:
797    py_includes.append(py_platform_include)
798
799py_lib_path = [ py_getvar('LIBDIR') ]
800# add the prefix/lib/pythonX.Y/config dir, but only if there is no
801# shared library in prefix/lib/.
802if not py_getvar('Py_ENABLE_SHARED'):
803    py_lib_path.append(py_getvar('LIBPL'))
804
805py_libs = []
806for lib in py_getvar('LIBS').split() + py_getvar('SYSLIBS').split():
807    if not lib.startswith('-l'):
808        # Python requires some special flags to link (e.g. -framework
809        # common on OS X systems), assume appending preserves order
810        main.Append(LINKFLAGS=[lib])
811    else:
812        lib = lib[2:]
813        if lib not in py_libs:
814            py_libs.append(lib)
815py_libs.append(py_version)
816
817main.Append(CPPPATH=py_includes)
818main.Append(LIBPATH=py_lib_path)
819
820# Cache build files in the supplied directory.
821if main['M5_BUILD_CACHE']:
822    print 'Using build cache located at', main['M5_BUILD_CACHE']
823    CacheDir(main['M5_BUILD_CACHE'])
824
825
826# verify that this stuff works
827if not conf.CheckHeader('Python.h', '<>'):
828    print "Error: can't find Python.h header in", py_includes
829    print "Install Python headers (package python-dev on Ubuntu and RedHat)"
830    Exit(1)
831
832for lib in py_libs:
833    if not conf.CheckLib(lib):
834        print "Error: can't find library %s required by python" % lib
835        Exit(1)
836
837# On Solaris you need to use libsocket for socket ops
838if not conf.CheckLibWithHeader(None, 'sys/socket.h', 'C++', 'accept(0,0,0);'):
839   if not conf.CheckLibWithHeader('socket', 'sys/socket.h', 'C++', 'accept(0,0,0);'):
840       print "Can't find library with socket calls (e.g. accept())"
841       Exit(1)
842
843# Check for zlib.  If the check passes, libz will be automatically
844# added to the LIBS environment variable.
845if not conf.CheckLibWithHeader('z', 'zlib.h', 'C++','zlibVersion();'):
846    print 'Error: did not find needed zlib compression library '\
847          'and/or zlib.h header file.'
848    print '       Please install zlib and try again.'
849    Exit(1)
850
851# If we have the protobuf compiler, also make sure we have the
852# development libraries. If the check passes, libprotobuf will be
853# automatically added to the LIBS environment variable. After
854# this, we can use the HAVE_PROTOBUF flag to determine if we have
855# got both protoc and libprotobuf available.
856main['HAVE_PROTOBUF'] = main['PROTOC'] and \
857    conf.CheckLibWithHeader('protobuf', 'google/protobuf/message.h',
858                            'C++', 'GOOGLE_PROTOBUF_VERIFY_VERSION;')
859
860# If we have the compiler but not the library, print another warning.
861if main['PROTOC'] and not main['HAVE_PROTOBUF']:
862    print termcap.Yellow + termcap.Bold + \
863        'Warning: did not find protocol buffer library and/or headers.\n' + \
864    '       Please install libprotobuf-dev for tracing support.' + \
865    termcap.Normal
866
867# Check for librt.
868have_posix_clock = \
869    conf.CheckLibWithHeader(None, 'time.h', 'C',
870                            'clock_nanosleep(0,0,NULL,NULL);') or \
871    conf.CheckLibWithHeader('rt', 'time.h', 'C',
872                            'clock_nanosleep(0,0,NULL,NULL);')
873
874if conf.CheckLib('tcmalloc_minimal'):
875    have_tcmalloc = True
876else:
877    have_tcmalloc = False
878    print termcap.Yellow + termcap.Bold + \
879          "You can get a 12% performance improvement by installing tcmalloc "\
880          "(libgoogle-perftools-dev package on Ubuntu or RedHat)." + \
881          termcap.Normal
882
883if not have_posix_clock:
884    print "Can't find library for POSIX clocks."
885
886# Check for <fenv.h> (C99 FP environment control)
887have_fenv = conf.CheckHeader('fenv.h', '<>')
888if not have_fenv:
889    print "Warning: Header file <fenv.h> not found."
890    print "         This host has no IEEE FP rounding mode control."
891
892######################################################################
893#
894# Finish the configuration
895#
896main = conf.Finish()
897
898######################################################################
899#
900# Collect all non-global variables
901#
902
903# Define the universe of supported ISAs
904all_isa_list = [ ]
905Export('all_isa_list')
906
907class CpuModel(object):
908    '''The CpuModel class encapsulates everything the ISA parser needs to
909    know about a particular CPU model.'''
910
911    # Dict of available CPU model objects.  Accessible as CpuModel.dict.
912    dict = {}
913    list = []
914    defaults = []
915
916    # Constructor.  Automatically adds models to CpuModel.dict.
917    def __init__(self, name, filename, includes, strings, default=False):
918        self.name = name           # name of model
919        self.filename = filename   # filename for output exec code
920        self.includes = includes   # include files needed in exec file
921        # The 'strings' dict holds all the per-CPU symbols we can
922        # substitute into templates etc.
923        self.strings = strings
924
925        # This cpu is enabled by default
926        self.default = default
927
928        # Add self to dict
929        if name in CpuModel.dict:
930            raise AttributeError, "CpuModel '%s' already registered" % name
931        CpuModel.dict[name] = self
932        CpuModel.list.append(name)
933
934Export('CpuModel')
935
936# Sticky variables get saved in the variables file so they persist from
937# one invocation to the next (unless overridden, in which case the new
938# value becomes sticky).
939sticky_vars = Variables(args=ARGUMENTS)
940Export('sticky_vars')
941
942# Sticky variables that should be exported
943export_vars = []
944Export('export_vars')
945
946# For Ruby
947all_protocols = []
948Export('all_protocols')
949protocol_dirs = []
950Export('protocol_dirs')
951slicc_includes = []
952Export('slicc_includes')
953
954# Walk the tree and execute all SConsopts scripts that wil add to the
955# above variables
956if not GetOption('verbose'):
957    print "Reading SConsopts"
958for bdir in [ base_dir ] + extras_dir_list:
959    if not isdir(bdir):
960        print "Error: directory '%s' does not exist" % bdir
961        Exit(1)
962    for root, dirs, files in os.walk(bdir):
963        if 'SConsopts' in files:
964            if GetOption('verbose'):
965                print "Reading", joinpath(root, 'SConsopts')
966            SConscript(joinpath(root, 'SConsopts'))
967
968all_isa_list.sort()
969
970sticky_vars.AddVariables(
971    EnumVariable('TARGET_ISA', 'Target ISA', 'alpha', all_isa_list),
972    ListVariable('CPU_MODELS', 'CPU models',
973                 sorted(n for n,m in CpuModel.dict.iteritems() if m.default),
974                 sorted(CpuModel.list)),
975    BoolVariable('EFENCE', 'Link with Electric Fence malloc debugger',
976                 False),
977    BoolVariable('SS_COMPATIBLE_FP',
978                 'Make floating-point results compatible with SimpleScalar',
979                 False),
980    BoolVariable('USE_SSE2',
981                 'Compile for SSE2 (-msse2) to get IEEE FP on x86 hosts',
982                 False),
983    BoolVariable('USE_POSIX_CLOCK', 'Use POSIX Clocks', have_posix_clock),
984    BoolVariable('USE_FENV', 'Use <fenv.h> IEEE mode control', have_fenv),
985    BoolVariable('CP_ANNOTATE', 'Enable critical path annotation capability', False),
986    EnumVariable('PROTOCOL', 'Coherence protocol for Ruby', 'None',
987                  all_protocols),
988    )
989
990# These variables get exported to #defines in config/*.hh (see src/SConscript).
991export_vars += ['USE_FENV', 'SS_COMPATIBLE_FP', 'TARGET_ISA', 'CP_ANNOTATE',
992                'USE_POSIX_CLOCK', 'PROTOCOL', 'HAVE_PROTOBUF']
993
994###################################################
995#
996# Define a SCons builder for configuration flag headers.
997#
998###################################################
999
1000# This function generates a config header file that #defines the
1001# variable symbol to the current variable setting (0 or 1).  The source
1002# operands are the name of the variable and a Value node containing the
1003# value of the variable.
1004def build_config_file(target, source, env):
1005    (variable, value) = [s.get_contents() for s in source]
1006    f = file(str(target[0]), 'w')
1007    print >> f, '#define', variable, value
1008    f.close()
1009    return None
1010
1011# Combine the two functions into a scons Action object.
1012config_action = MakeAction(build_config_file, Transform("CONFIG H", 2))
1013
1014# The emitter munges the source & target node lists to reflect what
1015# we're really doing.
1016def config_emitter(target, source, env):
1017    # extract variable name from Builder arg
1018    variable = str(target[0])
1019    # True target is config header file
1020    target = joinpath('config', variable.lower() + '.hh')
1021    val = env[variable]
1022    if isinstance(val, bool):
1023        # Force value to 0/1
1024        val = int(val)
1025    elif isinstance(val, str):
1026        val = '"' + val + '"'
1027
1028    # Sources are variable name & value (packaged in SCons Value nodes)
1029    return ([target], [Value(variable), Value(val)])
1030
1031config_builder = Builder(emitter = config_emitter, action = config_action)
1032
1033main.Append(BUILDERS = { 'ConfigFile' : config_builder })
1034
1035# libelf build is shared across all configs in the build root.
1036main.SConscript('ext/libelf/SConscript',
1037                variant_dir = joinpath(build_root, 'libelf'))
1038
1039# gzstream build is shared across all configs in the build root.
1040main.SConscript('ext/gzstream/SConscript',
1041                variant_dir = joinpath(build_root, 'gzstream'))
1042
1043# libfdt build is shared across all configs in the build root.
1044main.SConscript('ext/libfdt/SConscript',
1045                variant_dir = joinpath(build_root, 'libfdt'))
1046
1047###################################################
1048#
1049# This function is used to set up a directory with switching headers
1050#
1051###################################################
1052
1053main['ALL_ISA_LIST'] = all_isa_list
1054def make_switching_dir(dname, switch_headers, env):
1055    # Generate the header.  target[0] is the full path of the output
1056    # header to generate.  'source' is a dummy variable, since we get the
1057    # list of ISAs from env['ALL_ISA_LIST'].
1058    def gen_switch_hdr(target, source, env):
1059        fname = str(target[0])
1060        f = open(fname, 'w')
1061        isa = env['TARGET_ISA'].lower()
1062        print >>f, '#include "%s/%s/%s"' % (dname, isa, basename(fname))
1063        f.close()
1064
1065    # Build SCons Action object. 'varlist' specifies env vars that this
1066    # action depends on; when env['ALL_ISA_LIST'] changes these actions
1067    # should get re-executed.
1068    switch_hdr_action = MakeAction(gen_switch_hdr,
1069                          Transform("GENERATE"), varlist=['ALL_ISA_LIST'])
1070
1071    # Instantiate actions for each header
1072    for hdr in switch_headers:
1073        env.Command(hdr, [], switch_hdr_action)
1074Export('make_switching_dir')
1075
1076###################################################
1077#
1078# Define build environments for selected configurations.
1079#
1080###################################################
1081
1082for variant_path in variant_paths:
1083    print "Building in", variant_path
1084
1085    # Make a copy of the build-root environment to use for this config.
1086    env = main.Clone()
1087    env['BUILDDIR'] = variant_path
1088
1089    # variant_dir is the tail component of build path, and is used to
1090    # determine the build parameters (e.g., 'ALPHA_SE')
1091    (build_root, variant_dir) = splitpath(variant_path)
1092
1093    # Set env variables according to the build directory config.
1094    sticky_vars.files = []
1095    # Variables for $BUILD_ROOT/$VARIANT_DIR are stored in
1096    # $BUILD_ROOT/variables/$VARIANT_DIR so you can nuke
1097    # $BUILD_ROOT/$VARIANT_DIR without losing your variables settings.
1098    current_vars_file = joinpath(build_root, 'variables', variant_dir)
1099    if isfile(current_vars_file):
1100        sticky_vars.files.append(current_vars_file)
1101        print "Using saved variables file %s" % current_vars_file
1102    else:
1103        # Build dir-specific variables file doesn't exist.
1104
1105        # Make sure the directory is there so we can create it later
1106        opt_dir = dirname(current_vars_file)
1107        if not isdir(opt_dir):
1108            mkdir(opt_dir)
1109
1110        # Get default build variables from source tree.  Variables are
1111        # normally determined by name of $VARIANT_DIR, but can be
1112        # overridden by '--default=' arg on command line.
1113        default = GetOption('default')
1114        opts_dir = joinpath(main.root.abspath, 'build_opts')
1115        if default:
1116            default_vars_files = [joinpath(build_root, 'variables', default),
1117                                  joinpath(opts_dir, default)]
1118        else:
1119            default_vars_files = [joinpath(opts_dir, variant_dir)]
1120        existing_files = filter(isfile, default_vars_files)
1121        if existing_files:
1122            default_vars_file = existing_files[0]
1123            sticky_vars.files.append(default_vars_file)
1124            print "Variables file %s not found,\n  using defaults in %s" \
1125                  % (current_vars_file, default_vars_file)
1126        else:
1127            print "Error: cannot find variables file %s or " \
1128                  "default file(s) %s" \
1129                  % (current_vars_file, ' or '.join(default_vars_files))
1130            Exit(1)
1131
1132    # Apply current variable settings to env
1133    sticky_vars.Update(env)
1134
1135    help_texts["local_vars"] += \
1136        "Build variables for %s:\n" % variant_dir \
1137                 + sticky_vars.GenerateHelpText(env)
1138
1139    # Process variable settings.
1140
1141    if not have_fenv and env['USE_FENV']:
1142        print "Warning: <fenv.h> not available; " \
1143              "forcing USE_FENV to False in", variant_dir + "."
1144        env['USE_FENV'] = False
1145
1146    if not env['USE_FENV']:
1147        print "Warning: No IEEE FP rounding mode control in", variant_dir + "."
1148        print "         FP results may deviate slightly from other platforms."
1149
1150    if env['EFENCE']:
1151        env.Append(LIBS=['efence'])
1152
1153    # Save sticky variable settings back to current variables file
1154    sticky_vars.Save(current_vars_file, env)
1155
1156    if env['USE_SSE2']:
1157        env.Append(CCFLAGS=['-msse2'])
1158
1159    if have_tcmalloc:
1160        env.Append(LIBS=['tcmalloc_minimal'])
1161
1162    # The src/SConscript file sets up the build rules in 'env' according
1163    # to the configured variables.  It returns a list of environments,
1164    # one for each variant build (debug, opt, etc.)
1165    envList = SConscript('src/SConscript', variant_dir = variant_path,
1166                         exports = 'env')
1167
1168    # Set up the regression tests for each build.
1169    for e in envList:
1170        SConscript('tests/SConscript',
1171                   variant_dir = joinpath(variant_path, 'tests', e.Label),
1172                   exports = { 'env' : e }, duplicate = False)
1173
1174# base help text
1175Help('''
1176Usage: scons [scons options] [build variables] [target(s)]
1177
1178Extra scons options:
1179%(options)s
1180
1181Global build variables:
1182%(global_vars)s
1183
1184%(local_vars)s
1185''' % help_texts)
1186