SConstruct revision 1048
1# -*- mode:python -*-
2
3# Copyright (c) 2004 The Regents of The University of Michigan
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions are
8# met: redistributions of source code must retain the above copyright
9# notice, this list of conditions and the following disclaimer;
10# redistributions in binary form must reproduce the above copyright
11# notice, this list of conditions and the following disclaimer in the
12# documentation and/or other materials provided with the distribution;
13# neither the name of the copyright holders nor the names of its
14# contributors may be used to endorse or promote products derived from
15# this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
20# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
21# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
23# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28
29###################################################
30#
31# SCons top-level build description (SConstruct) file.
32#
33# To build M5, you need a directory with three things:
34# 1. A copy of this file (named SConstruct).
35# 2. A link named 'm5' to the top of the M5 simulator source tree.
36# 3. A link named 'ext' to the top of the M5 external source tree.
37#
38# Then type 'scons' to build the default configuration (see below), or
39# 'scons <CONFIG>/<binary>' to build some other configuration (e.g.,
40# 'KERNEL/m5.opt' for the optimized full-system version).
41#
42###################################################
43
44# Python library imports
45import sys
46import os
47
48# The absolute path to the current directory (where this file lives).
49ROOT = Dir('.').abspath
50
51# Paths to the M5 and external source trees (local symlinks).
52SRCDIR = os.path.join(ROOT, 'm5')
53EXT_SRCDIR = os.path.join(ROOT, 'ext')
54
55# Check for 'm5' and 'ext' links, die if they don't exist.
56if not os.path.isdir(SRCDIR):
57    print "Error: '%s' must be a link to the M5 source tree." % SRCDIR
58    sys.exit(1)
59
60if not os.path.isdir('ext'):
61    print "Error: '%s' must be a link to the M5 external source tree." \
62          % EXT_SRCDIR
63    sys.exit(1)
64
65
66###################################################
67#
68# Define Configurations
69#
70# The build system infers the build options from the subdirectory name
71# that the simulator is built under.  The subdirectory name must be of
72# the form <CONFIG>[.<OPT>]*, where <CONFIG> is a base configuration
73# (e.g., ALPHA or KERNEL) and OPT is an option (e.g., MYSQL).  The
74# following code defines the standard configurations and options.
75# Additional local configurations and options are read from the file
76# 'local_configs' if it exists.
77#
78# Each base configuration or option is defined in two steps: a
79# function that takes an SCons build environment and modifies it
80# appropriately for that config or option, and an entry in the
81# 'configs_map' or 'options_map' dictionary that maps the directory
82# name string to the function.  (The directory names are all upper
83# case, by convention.)
84#
85###################################################
86
87# Base non-full-system Alpha ISA configuration.
88def AlphaConfig(env):
89    env.Replace(TARGET_ISA = 'alpha')
90    env.Append(CPPDEFINES = 'SS_COMPATIBLE_FP')
91
92# Base full-system configuration.
93def KernelConfig(env):
94    env.Replace(TARGET_ISA = 'alpha')
95    env.Replace(FULL_SYSTEM = True)
96    env.Append(CPPDEFINES = ['FULL_SYSTEM', 'SYSTEM_EV5'])
97
98# Base configurations map.
99configs_map = {
100    'ALPHA' : AlphaConfig,
101    'KERNEL' : KernelConfig
102    }
103
104# Enable detailed full-system binning.
105def MeasureOpt(env):
106    env.Replace(USE_MYSQL = True)
107    env.Append(CPPDEFINES = 'FS_MEASURE')
108
109# Enable MySql database output for stats.
110def MySqlOpt(env):
111    env.Replace(USE_MYSQL = True)
112
113# Disable FastAlloc object allocation.
114def NoFastAllocOpt(env):
115    env.Append(CPPDEFINES = 'NO_FAST_ALLOC')
116
117# Configuration options map.
118options_map = {
119    'MEASURE' : MeasureOpt,
120    'MYSQL' : MySqlOpt,
121    'NO_FAST_ALLOC' : NoFastAllocOpt
122    }
123
124# The 'local_configs' file can be used to define additional base
125# configurations and/or options without changing this file.
126if os.path.isfile('local_configs'):
127    SConscript('local_configs', exports = ['configs_map', 'options_map'])
128
129# This function parses a directory name of the form <CONFIG>[.<OPT>]*
130# and sets up the build environment appropriately.  Returns True if
131# successful, False if the base config or any of the options were not
132# defined.
133def set_dir_options(dir, env):
134    parts = dir.split('.')
135    config = parts[0]
136    opts = parts[1:]
137    try:
138        configs_map[config](env)
139        map(lambda opt: options_map[opt](env), opts)
140        return True
141    except KeyError, key:
142        print "Config/option '%s' not found." % key
143        return False
144
145# Set the default configuration and binary.  The default target (if
146# scons is invoked at the top level with no command-line targets) is
147# 'ALPHA/m5.debug'.  If scons is invoked in a subdirectory with no
148# command-line targets, the configuration
149
150###################################################
151#
152# Figure out which configurations to set up.
153#
154#
155# It's prohibitive to do all the combinations of base configurations
156# and options, so we have to infer which ones the user wants.
157#
158# 1. If there are command-line targets, the configuration(s) are inferred
159#    from the directories of those targets.  If scons was invoked from a
160#    subdirectory (using 'scons -u'), those targets have to be
161#    interpreted relative to that subdirectory.
162#
163# 2. If there are no command-line targets, and scons was invoked from a
164#    subdirectory (using 'scons -u'), the configuration is inferred from
165#    the name of the subdirectory.
166#
167# 3. If there are no command-line targets and scons was invoked from
168#    the root build directory, a default configuration is used.  The
169#    built-in default is ALPHA, but this can be overridden by setting the
170#    M5_DEFAULT_CONFIG shell environment veriable.
171#
172# In cases 2 & 3, the specific file target defaults to 'm5.debug', but
173# this can be overridden by setting the M5_DEFAULT_BINARY shell
174# environment veriable.
175#
176###################################################
177
178# Find default configuration & binary.
179default_config = os.environ.get('M5_DEFAULT_CONFIG', 'ALPHA')
180default_binary = os.environ.get('M5_DEFAULT_BINARY', 'm5.debug')
181
182# Ask SCons which directory it was invoked from.  If you invoke SCons
183# from a subdirectory you must use the '-u' flag.
184launch_dir = GetLaunchDir()
185
186# Build a list 'my_targets' of all the targets relative to ROOT.
187if launch_dir == ROOT:
188    # invoked from root build dir
189    if len(COMMAND_LINE_TARGETS) != 0:
190        # easy: use specified targets as is
191        my_targets = COMMAND_LINE_TARGETS
192    else:
193        # default target (ALPHA/m5.debug, unless overridden)
194        target = os.path.join(default_config, default_binary)
195        my_targets = [target]
196        Default(target)
197else:
198    # invoked from subdirectory
199    if not launch_dir.startswith(ROOT):
200        print "Error: launch dir (%s) not a subdirectory of ROOT (%s)!" \
201              (launch_dir, ROOT)
202        sys.exit(1)
203    # make launch_dir relative to ROOT (strip ROOT plus slash off front)
204    launch_dir = launch_dir[len(ROOT)+1:]
205    if len(COMMAND_LINE_TARGETS) != 0:
206        # make specified targets relative to ROOT
207        my_targets = map(lambda x: os.path.join(launch_dir, x),
208                         COMMAND_LINE_TARGETS)
209    else:
210        # build default binary (m5.debug, unless overridden) using the
211        # config inferred by the invocation directory (the first
212        # subdirectory after ROOT)
213        target = os.path.join(launch_dir.split('/')[0], default_binary)
214        my_targets = [target]
215        Default(target)
216
217# Normalize target paths (gets rid of '..' in the middle, etc.)
218my_targets = map(os.path.normpath, my_targets)
219
220# Generate a list of the unique configs that the collected targets reference.
221build_dirs = []
222for t in my_targets:
223    dir = t.split('/')[0]
224    if dir not in build_dirs:
225        build_dirs.append(dir)
226
227###################################################
228#
229# Set up the default build environment.  This environment is copied
230# and modified according to each selected configuration.
231#
232###################################################
233
234default_env = Environment(ENV = os.environ,  # inherit user's enviroment vars
235                          ROOT = ROOT,
236                          SRCDIR = SRCDIR,
237                          EXT_SRCDIR = EXT_SRCDIR,
238                          CPPDEFINES = [],
239                          FULL_SYSTEM = False,
240                          USE_MYSQL = False)
241
242# M5_EXT is used by isa_parser.py to find the PLY package.
243default_env.Append(ENV = { 'M5_EXT' : EXT_SRCDIR })
244
245default_env.Append(CCFLAGS='-pipe')
246default_env.Append(CCFLAGS='-fno-strict-aliasing')
247default_env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
248
249# libelf build is described in its own SConscript file.  Using a
250# dictionary for exports lets us export "default_env" so the
251# SConscript will see it as "env".  SConscript-global is the build in
252# build/libelf shared among all configs.
253default_env.SConscript('m5/libelf/SConscript-global',
254                       exports={'env' : default_env})
255
256###################################################
257#
258# Define build environments for selected configurations.
259#
260###################################################
261
262for build_dir in build_dirs:
263    # Make a copy of the default environment to use for this config.
264    env = default_env.Copy()
265    # Modify 'env' according to the build directory config.
266    print "Configuring options for directory '%s'." % build_dir
267    if not set_dir_options(build_dir, env):
268        print "Skipping directory '%s'." % build_dir
269        continue
270
271    # The m5/SConscript file sets up the build rules in 'env' according
272    # to the configured options.
273    SConscript('m5/SConscript', build_dir = build_dir, exports = 'env',
274               duplicate=0)
275
276
277###################################################
278#
279# Let SCons do its thing.  At this point SCons will use the defined
280# build enviornments to build the requested targets.
281#
282###################################################
283
284