/*
 * Copyright (c) 2004-2005 The Regents of The University of Michigan
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Ali Saidi
 *          Andrew Schultz
 *          Nathan Binkert
 */

/* @file
 * Interface for devices using PCI configuration
 */

#ifndef __DEV_PCIDEV_HH__
#define __DEV_PCIDEV_HH__

#include "dev/io_device.hh"
#include "dev/pcireg.h"
#include "dev/platform.hh"

#define BAR_IO_MASK 0x3
#define BAR_MEM_MASK 0xF
#define BAR_IO_SPACE_BIT 0x1
#define BAR_IO_SPACE(x) ((x) & BAR_IO_SPACE_BIT)
#define BAR_NUMBER(x) (((x) - PCI0_BASE_ADDR0) >> 0x2);


/**
 * This class encapulates the first 64 bytes of a singles PCI
 * devices config space that in configured by the configuration file.
 */
class PciConfigData : public SimObject
{
  public:
    /**
     * Constructor to initialize the devices config space to 0.
     */
    PciConfigData(const std::string &name)
        : SimObject(name)
    {
        memset(config.data, 0, sizeof(config.data));
        memset(BARAddrs, 0, sizeof(BARAddrs));
        memset(BARSize, 0, sizeof(BARSize));
    }

    /** The first 64 bytes */
    PCIConfig config;

    /** The size of the BARs */
    uint32_t BARSize[6];

    /** The addresses of the BARs */
    Addr BARAddrs[6];
};


/**
 * PCI device, base implemnation is only config space.
 */
class PciDev : public DmaDevice
{
    class PciConfigPort : public PioPort
    {
      protected:
        PciDev *device;

        virtual bool recvTiming(Packet *pkt);

        virtual Tick recvAtomic(Packet *pkt);

        virtual void recvFunctional(Packet *pkt) ;

        virtual void getDeviceAddressRanges(AddrRangeList &resp, AddrRangeList &snoop);

        int busId;
        int deviceId;
        int functionId;

        Addr configAddr;

      public:
        PciConfigPort(PciDev *dev, int busid, int devid, int funcid,
                Platform *p);

      friend class PioPort::SendEvent;
    };

  public:
    struct Params : public PioDevice::Params
    {
        /**
         * A pointer to the object that contains the first 64 bytes of
         * config space
         */
        PciConfigData *configData;

        /** The bus number we are on */
        uint32_t busNum;

        /** The device number we have */
        uint32_t deviceNum;

        /** The function number */
        uint32_t functionNum;

        /** The latency for pio accesses. */
        Tick pio_delay;

        /** The latency for a config access. */
        Tick config_delay;
    };

  public:
    const Params *params() const { return (const Params *)_params; }

  protected:
    /** The current config space. Unlike the PciConfigData this is
     * updated during simulation while continues to reflect what was
     * in the config file.
     */
    PCIConfig config;

    /** The size of the BARs */
    uint32_t BARSize[6];

    /** The current address mapping of the BARs */
    Addr BARAddrs[6];

    bool
    isBAR(Addr addr, int bar) const
    {
        assert(bar >= 0 && bar < 6);
        return BARAddrs[bar] <= addr && addr < BARAddrs[bar] + BARSize[bar];
    }

    int
    getBAR(Addr addr)
    {
        for (int i = 0; i <= 5; ++i)
            if (isBAR(addr, i))
                return i;

        return -1;
    }

    bool
    getBAR(Addr paddr, Addr &daddr, int &bar)
    {
        int b = getBAR(paddr);
        if (b < 0)
            return false;

        daddr = paddr - BARAddrs[b];
        bar = b;
        return true;
    }

  protected:
    Platform *plat;
    PciConfigData *configData;
    Tick pioDelay;
    Tick configDelay;
    PciConfigPort *configPort;

    /**
     * Write to the PCI config space data that is stored locally. This may be
     * overridden by the device but at some point it will eventually call this
     * for normal operations that it does not need to override.
     * @param pkt packet containing the write the offset into config space
     */
    virtual Tick writeConfig(Packet *pkt);


    /**
     * Read from the PCI config space data that is stored locally. This may be
     * overridden by the device but at some point it will eventually call this
     * for normal operations that it does not need to override.
     * @param pkt packet containing the write the offset into config space
     */
    virtual Tick readConfig(Packet *pkt);

  public:
    Addr pciToDma(Addr pciAddr) const
    { return plat->pciToDma(pciAddr); }

    void
    intrPost()
    { plat->postPciInt(letoh(configData->config.interruptLine)); }

    void
    intrClear()
    { plat->clearPciInt(letoh(configData->config.interruptLine)); }

    uint8_t
    interruptLine()
    { return letoh(configData->config.interruptLine); }

    /** return the address ranges that this device responds to.
     * @params range_list range list to populate with ranges
     */
    void addressRanges(AddrRangeList &range_list);

    /** Do a PCI Configspace memory access. */
    Tick recvConfig(Packet *pkt)
    { return pkt->isRead() ? readConfig(pkt) : writeConfig(pkt); }

    /**
     * Constructor for PCI Dev. This function copies data from the
     * config file object PCIConfigData and registers the device with
     * a PciConfigAll object.
     */
    PciDev(Params *params);

    virtual void init();

    /**
     * Serialize this object to the given output stream.
     * @param os The stream to serialize to.
     */
    virtual void serialize(std::ostream &os);

    /**
     * Reconstruct the state of this object from a checkpoint.
     * @param cp The checkpoint use.
     * @param section The section name of this object
     */
    virtual void unserialize(Checkpoint *cp, const std::string &section);

    virtual Port *getPort(const std::string &if_name, int idx = -1)
    {
        if (if_name == "config") {
            if (configPort != NULL)
                panic("pciconfig port already connected to.");
            configPort = new PciConfigPort(this, params()->busNum,
                    params()->deviceNum, params()->functionNum,
                    params()->platform);
            return configPort;
        }
        return DmaDevice::getPort(if_name, idx);
    }

};
#endif // __DEV_PCIDEV_HH__