cpu, mem: Changing AtomicOpFunctor* for unique_ptr<AtomicOpFunctor>

This change is based on modify the way we move the AtomicOpFunctor*
through gem5 in order to mantain proper ownership of the object and
ensuring its destruction when it is no longer used.

Doing that we fix at the same time a memory leak in Request.hh
where we were assigning a new AtomicOpFunctor* without destroying the
previous one.

This change creates a new type AtomicOpFunctor_ptr as a
std::unique_ptr<AtomicOpFunctor> and move its ownership as needed. Except
for its only usage when AtomicOpFunc() is called.

Change-Id: Ic516f9d8217cb1ae1f0a19500e5da0336da9fd4f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20919
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Make get(Data|Inst)Port return a Port and not a MasterPort.

No caller uses any of the MasterPort specific properties of these
function's return values, so we can instead return a reference to the
base Port class. This makes it possible for the data and inst ports
to be of any port type, not just gem5 style MasterPorts. This makes
life simpler for, for example, systemc based CPUs which might have TLM
ports.

It also makes it possible for any two CPUs which have compatible ports
to be switched between, as long as the ports they use support being
unbound. Unfortunately that does not include TLM or systemc ports which
are bound permanently.

Change-Id: I98fce5a16d2ef1af051238e929dd96d57a4ac838
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20240
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu: Add first-/non-faulting load support to Minor and O3

Some architectures allow masking faults of memory load instructions in
some specific circumstances (e.g. first-faulting and non-faulting
loads in Arm SVE). This patch adds support for such loads in the Minor
and O3 CPU models.

Change-Id: I264a81a078f049127779aa834e89f0e693ba0bea
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

Revert "cpu: fix how a thread starts up in MinorCPU"

This reverts commit 02dafc5498750d9734ba8f2a1608a846f90b71d1.
The commit was part of a patchset which broke MinorCPU regressions
(switcheroo)

Change-Id: I0a8098fc71abe5838014e587dbe372b258d8aa9f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18604
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

Revert "cpu: stop scheduling suspended threads in MinorCPU"

This reverts commit 6a6668bbc4b038b98eb3ee64ffb034719316afd9.
The commit was part of a patchset which broke MinorCPU regressions
(switcheroo)

Change-Id: I3c16a6478ba44b9d27cdd3d64a710a356999df05
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18603
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

Revert "cpu: fix branching when thread is suspended in MinorCPU"

This reverts commit e437086341712f1435db655b3527ea29b3311f4e.
The commit was part of a patchset which broke MinorCPU regressions
(switcheroo)

Change-Id: Ib8482034c2402008ccfa552325a8eb31e731b619
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18602
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu,mem: Add support for partial loads/stores and wide mem. accesses

This changeset adds support for partial (or masked) loads/stores, i.e.
loads/stores that can disable accesses to individual bytes within the
target address range. In addition, this changeset extends the code to
crack memory accesses across most CPU models (TimingSimpleCPU still
TBD), so that arbitrarily wide memory accesses are supported. These
changes are required for supporting ISAs with wide vectors.

Additional authors:
- Gabor Dozsa <gabor.dozsa@arm.com>
- Tiago Muck <tiago.muck@arm.com>

Change-Id: Ibad33541c258ad72925c0b1d5abc3e5e8bf92d92
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13518
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

cpu: Add a memory access predicate

This changeset introduces a new predicate to guard memory accesses.
The most immediate use for this is to allow proper handling of
predicated-false vector contiguous loads and predicated-false
micro-ops of vector gather loads (added in separate changesets).

Change-Id: Ice6894fe150faec2f2f7ab796a00c99ac843810a
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17991
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradley Wang <radwang@ucdavis.edu>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

cpu: alpha: Delete all occurrances of the simPalCheck function.

This is now handled within the ISA description.

Change-Id: Ie409bb46d102e59d4eb41408d9196fe235626d32
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18434
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Remove hwrei from the generic interfaces.

This mechanism is specific to Alpha and doesn't belong sprinkled around
the CPU's generic mechanisms.

Change-Id: I87904d1a08df2b03eb770205e2c4b94db25201a1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18432
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Get rid of the (read|set)RegOtherThread methods.

These are implemented by MIPS internally now.

Change-Id: If7465e1666e51e1314968efb56a5a814e62ee2d1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18436
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Added a probe to notify the address of retired instructions

A probe is added to notify the address of each retired instruction.

Change-Id: Iefc1b09d74b3aa0aa5773b17ba637bf51f5a59c9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17632
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm,cpu: Add initial support for Arm SVE

This changeset adds initial support for the Arm Scalable Vector Extension
(SVE) by implementing:
- support for most data-processing instructions (no loads/stores yet);
- basic system-level support.

Additional authors:
- Javier Setoain <javier.setoain@arm.com>
- Gabor Dozsa <gabor.dozsa@arm.com>
- Giacomo Travaglini <giacomo.travaglini@arm.com>

Thanks to Pau Cabre for his contribution of bugfixes.

Change-Id: I1808b5ff55b401777eeb9b99c9a1129e0d527709
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13515
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

python: Make iterator handling Python 3 compatible

Many functions that used to return lists (e.g., dict.items()) now
return iterators and their iterator counterparts (e.g.,
dict.iteritems()) have been removed. Switch calls to the Python 2.7
iterator methods to use the Python 3 equivalent and add explicit list
conversions where necessary.

Change-Id: I0c18114955af8f4932d81fb689a0adb939dafaba
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15992
Reviewed-by: Juha Jäykkä <juha.jaykka@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

python: Don't assume SimObjects live in the global namespace

The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.

Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

cpu: support atomic memory request type with AtomicOpFunctor

This patch enables all 4 CPU models (AtomicSimpleCPU, TimingSimpleCPU,
MinorCPU and DerivO3CPU) to issue atomic memory (AMO) requests to memory
system.

Atomic memory instruction is treated as a special store instruction in
all CPU models.

In simple CPUs, an AMO request with an associated AtomicOpFunctor is
simply sent to L1 dcache.

In MinorCPU, an AMO request bypasses store buffer and waits for any
conflicting store request(s) currently in the store buffer to retire
before the AMO request is sent to the cache. AMO requests are not buffered
in the store buffer, so their effects appear immediately in the cache.

In DerivO3CPU, an AMO request is inserted in the store buffer so that it
is delivered to the cache only after all previous stores are issued to
the cache. Data forwarding between between an outstanding AMO in the
store buffer and a subsequent load is not allowed since the AMO request
does not hold valid data until it's executed in the cache.

This implementation assumes that a target ISA implementation must insert
enough memory fences as micro-ops around an atomic instruction to
enforce a correct order of memory instructions with respect to its
memory consistency model. Without extra memory fences, this implementation
can allow AMOs and other memory instructions that do not conflict
(i.e., not target the same address) to reorder.

This implementation also assumes that atomic instructions execute within
a cache line boundary since the cache for now is not able to execute an
operation on two different cache lines in one single step. Therefore,
ISAs like x86 that require multi-cache-line atomic instructions need to
either use a pair of locking load and unlocking store or change the
cache implementation to guarantee the atomicity of an atomic
instruction.

Change-Id: Ib8a7c81868ac05b98d73afc7d16eb88486f8cf9a
Reviewed-on: https://gem5-review.googlesource.com/c/8188
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: fix how branching is handled when a thread is suspended in MinorCPU

When a thread is suspended, all instructions after the suspension need
to be discarded since the thread will take a different execution stream
when it wakes up.

To do that, in MinorCPU, whenever a thread gets suspended, we change the
current execution stream by updating the current branch with
BranchData::SuspendThread reason.

Change-Id: I7cdcda22c1cf6e8ac8db8800b7d9ec052433fdf3
Reviewed-on: https://gem5-review.googlesource.com/c/9626
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: stop scheduling suspended threads in all stages of MinorCPU

This patch makes suspended threads non-schedulable in Fetch1, Fetch2,
Decode and Execute stages in MinorCPU.

Change-Id: Ie79857e13b7b782d9c58c32310993a132b609cf9
Reviewed-on: https://gem5-review.googlesource.com/c/9625
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: fix how a thread starts up in MinorCPU

When a thread is activated by another thread calling a clone system
call, the child thread's context is initialized in the middle of the
clone system call and before the context is fully initialized.
Therefore, the child thread starts fetching an unitialized PC, which
could lead to a page fault.

This patch adds a pipeline wakeup event that is scheduled later in the
cycle when the thread is activated. This event ensures that the first
fetch only happens after the thread context is fully initialized
(e.g., in case of clone syscall, it is when the parent thread copies
its context over to the child thread).

When a thread first starts or wakes up, input queue to the Fetch2 stage
needs to be drained since the execution flow is likely to change and
previously fetched instructions in the queue may no longer be in the
correct flow. This patch dumps/drains all inputs in the input queue
of a thread context in the Fetch2 stage when the associated thread wakes
up.

Change-Id: Iad970638e435858b7289cd471158cc0afdbbb0e5
Reviewed-on: https://gem5-review.googlesource.com/c/8182
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

misc: added missing override specifier

Added missing specifier for various virtual functions.

Change-Id: I4783e92d78789a9ae182fad79aadceafb00b2458
Reviewed-on: https://gem5-review.googlesource.com/c/16103
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu, arch: Replace the CCReg type with RegVal.

Most architectures weren't using the CCReg type, and in x86 and arm
it was already a uint64_t.

Change-Id: I0b3d5e690e6b31db6f2627f449c89bde0f6750a6
Reviewed-on: https://gem5-review.googlesource.com/c/14515
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: cpu: Rename *FloatRegBits* to *FloatReg*.

Now that there's no plain FloatReg, there's no reason to distinguish
FloatRegBits with a special suffix since it's the only way to read or
write FP registers.

Change-Id: I3a60168c1d4302aed55223ea8e37b421f21efded
Reviewed-on: https://gem5-review.googlesource.com/c/14460
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu: Fix VecElemClass bugs in cpu models

This patch is:

* Adding a missing VecElemClass entry
* Fixing assertion in rename map which was checking the number of free
vector registers rather than free vector element registers
* Fixing assertion in read/setVecElemOperand APIs.
* Using the right register index in SimpleThread
* Using VecElem instead of VecReg on O3 readArchVecElem

Change-Id: I265320dcbe35eb47075991301dfc99333c5190c4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15598
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Add VecElem entries in MinorCPU Scoreboard

This patch is:
* Increasing the number of bits in the Scoreboard so that
it is keeping track of VecElemClass dependencies.
* Fixing VecElemClass entry in the scoreboard table so that it
correctly uses flatIndex rather than index.

Change-Id: Ie4877e5fe410b1437447adebbe289602a443f7c0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15597
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

arch: cpu: Stop passing around misc registers by reference.

These values are all basic integers (specifically uint64_t now), and
so passing them by const & is actually less efficient since there's a
extra level of indirection and an extra value, and the same sized value
(a 64 bit pointer vs. a 64 bit int) is being passed around.

Change-Id: Ie9956b8dc4c225068ab1afaba233ec2b42b76da3
Reviewed-on: https://gem5-review.googlesource.com/c/13626
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu: dev: sim: gpu-compute: Banish some ISA specific register types.

These types are IntReg, FloatReg, FloatRegBits, and MiscReg. There are
some remaining types, specifically the vector registers and the CCReg.
I'm less familiar with these new types of registers, and so will look
at getting rid of them at some later time.

Change-Id: Ide8f76b15c531286f61427330053b44074b8ac9b
Reviewed-on: https://gem5-review.googlesource.com/c/13624
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch, cpu: Remove float type accessors.

Use the binary accessors instead.

Change-Id: Iff1877e92c79df02b3d13635391a8c2f025776a2
Reviewed-on: https://gem5-review.googlesource.com/c/14457
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

base, sim: Add missing destructors

Derived classes with virtual functions need to define a virtual
destructor or a protected destructor otherwise calling the base class
destructor has undefined behavior. This change adds a virtual
distructor in the base class.

Change-Id: I1c855aa56dff6585ff99b9147bdb4eb9729a0a53
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14815
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch, base, cpu, gpu, mem: Replace assert(0 or false with panic.

Neither assert(0) nor assert(false) give any hint as to why control
getting to them is bad, and their more descriptive versions,
assert(0 && "description") and assert(false && "description"), jury
rig assert to add an error message when the utility function panic()
already does that directly with better formatting options.

This change replaces that flavor of call to assert with panic, except
in the actual code which processes the formatting that panic uses (to
avoid infinitely recurring error handling), and in some *.sm files
since I don't know what rules those have to follow and don't want to
accidentaly break them.

Change-Id: I8addfbfaf77eaed94ec8191f2ae4efb477cefdd0
Reviewed-on: https://gem5-review.googlesource.com/c/14636
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Fix the usage of const DynInstPtr

Summary: Usage of const DynInstPtr& when possible and introduction of
move operators to RefCountingPtr.

In many places, scoped references to dynamic instructions do a copy of
the DynInstPtr when a reference would do. This is detrimental to
performance. On top of that, in case there is a need for reference
tracking for debugging, the redundant copies make the process much more
painful than it already is.

Also, from the theoretical point of view, a function/method that
defines a convenience name to access an instruction should not be
considered an owner of the data, i.e., doing a copy and not a reference
is not justified.

On a related topic, C++11 introduces move semantics, and those are
useful when, for example, there is a class modelling a HW structure that
contains a list, and has a getHeadOfList function, to prevent doing a
copy to an internal variable -> update pointer, remove from the list ->
update pointer, return value making a copy to the assined variable ->
update pointer, destroy the returned value -> update pointer.

Change-Id: I3bb46c20ef23b6873b469fd22befb251ac44d2f6
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13105
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Fix MinorCPU executing Crypto Instructions

Crypto instruction classes added to the MinorDefaultFloatSimdFU.

Change-Id: I0cd4aa422bec74285595312a8cf01f5f425a82cd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13251
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu-minor: Remove redundant thread startup call

Don't call startup() twice on each of the threads.

Change-Id: Ibe3d1f25c4fdff291ee310abb9bcad3b184bab20
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11037

misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

misc: Substitute pointer to Request with aliased RequestPtr

Every usage of Request* in the code has been replaced with the
RequestPtr alias. This is a preparing patch for when RequestPtr will be
the typdefed to a smart pointer to Request rather then a raw pointer to
Request.

Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10995
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

scons: Switch from the print statement to the print function.

Starting with version 3, scons imposes using the print function instead
of the print statement in code it processes. To get things building
again, this change moves all python code within gem5 to use the
function version. Another change by another author separately made this
same change to the site_tools and site_init.py files.

Change-Id: I2de7dc3b1be756baad6f60574c47c8b7e80ea3b0
Reviewed-on: https://gem5-review.googlesource.com/8761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu: MinorCPU handling IsSquashAfter flag

MinorCPU was not handling IsSquashAfter flagged instructions. The
behaviour was to force a branch (hence enforcing refetching) for
SerializeAfter instructions only. This has now been extended to
SquashAfter in order to correctly support ISB barrier instruction
behaviour.

Change-Id: Ie525b23350b0de121372d3b98b433e36b097d5c4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5702
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, power: Get rid of the remnants of the EA computation insts.

Get rid of some remnants of a system which was intended to separate
address computation into its own instruction object.

Change-Id: I23f9ffd70fcb89a8ea5bbb934507fb00da9a0b7f
Reviewed-on: https://gem5-review.googlesource.com/7122
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: Updates for gcc7.2 for x86

GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:

* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878

Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>

cpu: Add support for CMOs in the cpu models

Cache maintenance operations go through the write channel of the
cpu. This changes makes sure that the cpu does not try to fill in the
packet with data.

Change-Id: Ic83205bb1cda7967636d88f15adcb475eb38d158
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5055
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

misc: Rename misc.(hh|cc) to logging.(hh|cc)

These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).

Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu-minor: Add missing instruction stats

Change-Id: I811b552989caf3601ac65a128dbee6b7bb405d7f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Updated to use IsVector instruction flag. ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5732
Reviewed-by: Gabe Black <gabeblack@google.com>

cpu, cpu, sim: move Cycle probe update

Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.

Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

pwr: Adds logic to enter power gating for the cpu model

If the CPU has been clock gated for a sufficient amount of time
(configurable via pwrGatingLatency), the CPU will go into the OFF
power state. This does not model hardware, just behaviour.

Change-Id: Ib3681d1ffa6ad25eba60f47b4020325f63472d43
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3969
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu-minor: Fix for addr range coverage calculation

Coverage was wrongly set to PartialAddrRangeCoverage in the case of
disjoint adjacent ranges

Change-Id: I29aaf5145e6cdcf5f0b8f4e009d57ee57bd4c944
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4640
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Refactor some Event subclasses to lambdas

Change-Id: If765c6100d67556f157e4e61aa33c2b7eeb8d2f0
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3923
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Added interface for vector reg file

This patch adds some more functionality to the cpu model and the arch to
interface with the vector register file.

This change consists mainly of augmenting ThreadContexts and ExecContexts
with calls to get/set full vectors, underlying microarchitectural elements
or lanes. Those are meant to interface with the vector register file. All
classes that implement this interface also get an appropriate implementation.

This requires implementing the vector register file for the different
models using the VecRegContainer class.

This change set also updates the Result abstraction to contemplate the
possibility of having a vector as result.

The changes also affect how the remote_gdb connection works.

There are some (nasty) side effects, such as the need to define dummy
numPhysVecRegs parameter values for architectures that do not implement
vector extensions.

Nathanael Premillieu's work with an increasing number of fixes and
improvements of mine.

Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues and CC reg free list initialisation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2705

cpu: Simplify the rename interface and use RegId

With the hierarchical RegId there are a lot of functions that are
redundant now.

The idea behind the simplification is that instead of having the regId,
telling which kind of register read/write/rename/lookup/etc. and then
the function panic_if'ing if the regId is not of the appropriate type,
we provide an interface that decides what kind of register to read
depending on the register type of the given regId.

Change-Id: I7d52e9e21fc01205ae365d86921a4ceb67a57178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2702

arch, cpu: Architectural Register structural indexing

Replace the unified register mapping with a structure associating
a class and an index. It is now much easier to know which class of
register the index is referring to. Also, when adding a new class
there is no need to modify existing ones.

Change-Id: I55b3ac80763702aa2cd3ed2cbff0a75ef7620373
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2700

syscall_emul: [patch 13/22] add system call retry capability

This changeset adds functionality that allows system calls to retry without
affecting thread context state such as the program counter or register values
for the associated thread context (when system calls return with a retry
fault).

This functionality is needed to solve problems with blocking system calls
in multi-process or multi-threaded simulations where information is passed
between processes/threads. Blocking system calls can cause deadlock because
the simulator itself is single threaded. There is only a single thread
servicing the event queue which can cause deadlock if the thread hits a
blocking system call instruction.

To illustrate the problem, consider two processes using the producer/consumer
sharing model. The processes can use file descriptors and the read and write
calls to pass information to one another. If the consumer calls the blocking
read system call before the producer has produced anything, the call will
block the event queue (while executing the system call instruction) and
deadlock the simulation.

The solution implemented in this changeset is to recognize that the system
calls will block and then generate a special retry fault. The fault will
be sent back up through the function call chain until it is exposed to the
cpu model's pipeline where the fault becomes visible. The fault will trigger
the cpu model to replay the instruction at a future tick where the call has
a chance to succeed without actually going into a blocking state.

In subsequent patches, we recognize that a syscall will block by calling a
non-blocking poll (from inside the system call implementation) and checking
for events. When events show up during the poll, it signifies that the call
would not have blocked and the syscall is allowed to proceed (calling an
underlying host system call if necessary). If no events are returned from the
poll, we generate the fault and try the instruction for the thread context
at a distant tick. Note that retrying every tick is not efficient.

As an aside, the simulator has some multi-threading support for the event
queue, but it is not used by default and needs work. Even if the event queue
was completely multi-threaded, meaning that there is a hardware thread on
the host servicing a single simulator thread contexts with a 1:1 mapping
between them, it's still possible to run into deadlock due to the event queue
barriers on quantum boundaries. The solution of replaying at a later tick
is the simplest solution and solves the problem generally.

style: [patch 3/22] reduce include dependencies in some headers

Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.

style: [patch 1/22] use /r/3648/ to reorganize includes

cpu: disallow speculative update of branch predictor tables (o3)

The Minor and o3 cpu models share the branch prediction
code. Minor relies on the BPredUnit::squash() function
to update the branch predictor tables on a branch mispre-
diction. This is fine because Minor executes in-order, so
the update is on the correct path. However, this causes the
branch predictor to be updated on out-of-order branch
mispredictions when using the o3 model, which should not
be the case.

This patch guards against speculative update of the branch
prediction tables. On a branch misprediction, BPredUnit::squash()
calls BpredUnit::update(..., squashed = true). The underlying
branch predictor tests against the value of squashed. If it is
true, it restores any speculatively updated internal state
it might have (e.g., global/local branch history), then returns.
If false, it updates its prediction tables. Previously, exist-
ing predictors did not test against the "squashed" parameter.

To accomodate for this change, the Minor model must now call
BPredUnit::squash() then BPredUnit::update(..., squashed = false)
on branch mispredictions. Before, calling BpredUnit::squash()
performed the prediction tables update.

The effect is a slight MPKI improvement when using the o3
model. A further patch should perform the same modifications
for the indirect target predictor and BTB (less critical).

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>

cpu, arm: Distinguish Float* and SimdFloat*, create FloatMem* opClass

Modify the opClass assigned to AArch64 FP instructions from SimdFloat* to
Float*. Also create the FloatMemRead and FloatMemWrite opClasses, which
distinguishes writes to the INT and FP register banks.
Change the latency of (Simd)FloatMultAcc to 5, based on the Cortex-A72,
where the "latency" of FMADD is 3 if the next instruction is a FMADD and
has only the augend to destination dependency, otherwise it's 7 cycles.

Signed-off-by: Jason Lowe-Power <jason@lowepower.com>

cpu: Add missing override in Minor's exec context

Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Fixed clang errors. Added 'override' keyword for virtual functions.

Change-Id: Ic37311443ca11ee6d95bceffea599e054e7aa110
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, arch: fix the type used for the request flags

Change-Id: I183b9942929c873c3272ce6d1abd4ebc472c7132
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Fix Minor SMT WFI/drain interaction issues

The behavior of WFI is to cause minor to cease evaluating
pipeline logic until an interrupt is observed, however
a user may wish to drain the system while a core is sleeping
due to a WFI. This patch makes WFI drain. If an actual
drain occurs during a WFI, the CPU is already drained and will
immediately be ready for swapping, checkpointing, etc. This
should not negatively impact performance as WFI instructions
are 'stream-changing' (treated like unpredicted branches), so
all remaining instructions are wrong-path and will be squashed
rapidly.

Change-Id: I63833d5acb53d8dde78f9f0c9611de0ece385e45

cpu: Add SMT support to MinorCPU

This patch adds SMT support to the MinorCPU. Currently
RoundRobin or Random thread scheduling are supported.

Change-Id: I91faf39ff881af5918cca05051829fc6261f20e3

pwr: Low-power idle power state for idle CPUs

Add functionality to the BaseCPU that will put the entire CPU
into a low-power idle state whenever all threads in it are idle.

Change-Id: I984d1656eb0a4863c87ceacd773d2d10de5cfd2b

cpu: fix lastStopped unserialisation

MinorCPU fix for corrupt numCycles when resuming from a previous simulation.
---
src/cpu/minor/cpu.cc | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.

Revert power patch sets with unexpected interactions

The following patches had unexpected interactions with the current
upstream code and have been reverted for now:

e07fd01651f3: power: Add support for power models
831c7f2f9e39: power: Low-power idle power state for idle CPUs
4f749e00b667: power: Add power states to ClockedObject

Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

power: Low-power idle power state for idle CPUs

Add functionality to the BaseCPU that will put the entire CPU into a low-power
idle state whenever all threads in it are idle.

cpu: Add instruction opclass histogram to minor

cpu: Fix LLSC atomic CPU wakeup

Writes to locked memory addresses (LLSC) did not wake up the locking
CPU. This can lead to deadlocks on multi-core runs. In AtomicSimpleCPU,
recvAtomicSnoop was checking if the incoming packet was an invalidation
(isInvalidate) and only then handled a locked snoop. But, writes are
seen instead of invalidates when running without caches (fast-forward
configurations). As as simple fix, now handleLockedSnoop is also called
even if the incoming snoop packet are from writes.

misc: Add missing overrides to appease clang

Since the last round of fixes a few new issues have snuck in. We
should consider switching the regression runs to clang.

mem: Deduce if cache should forward snoops

This patch changes how the cache determines if snoops should be
forwarded from the memory side to the CPU side. Instead of having a
parameter, the cache now looks at the port connected on the CPU side,
and if it is a snooping port, then snoops are forwarded. Less error
prone, and less parameters to worry about.

The patch also tidies up the CPU classes to ensure that their I-side
port is not snooping by removing overrides to the snoop request
handler, such that snoop requests will panic via the default
MasterPort implement

style: fix missing spaces in control statements

Result of running 'hg m5style --skip-all --fix-control -a'.

cpu. arch: add initiateMemRead() to ExecContext interface

For historical reasons, the ExecContext interface had a single
function, readMem(), that did two different things depending on
whether the ExecContext supported atomic memory mode (i.e.,
AtomicSimpleCPU) or timing memory mode (all the other models).
In the former case, it actually performed a memory read; in the
latter case, it merely initiated a read access, and the read
completion did not happen until later when a response packet
arrived from the memory system.

This led to some confusing things, including timing accesses
being required to provide a pointer for the return data even
though that pointer was only used in atomic mode.

This patch splits this interface, adding a new initiateMemRead()
function to the ExecContext interface to replace the timing-mode
use of readMem().

For consistency and clarity, the readMemTiming() helper function
in the ISA definitions is renamed to initiateMemRead() as well.
For x86, where the access size is passed in explicitly, we can
also get rid of the data parameter at this level. For other ISAs,
where the access size is determined from the type of the data
parameter, we have to keep the parameter for that purpose.

misc: Add explicit overrides and fix other clang >= 3.5 issues

This patch adds explicit overrides as this is now required when using
"-Wall" with clang >= 3.5, the latter now part of the most recent
XCode. The patch consequently removes "virtual" for those methods
where "override" is added. The latter should be enough of an
indication.

As part of this patch, a few minor issues that clang >= 3.5 complains
about are also resolved (unused methods and variables).

misc: Remove redundant compiler-specific defines

This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.

cpu,isa,mem: Add per-thread wakeup logic

Changes wakeup functionality so that only specific threads on SMT
capable cpus are woken.

isa,cpu: Add support for FS SMT Interrupts

Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.

cpu: Add per-thread monitors

Adds per-thread address monitors to support FullSystem SMT.

mem: Reflect that packet address and size are always valid

This patch simplifies the packet, and removes the possibility of
creating a packet without a valid address and/or size. Under no
circumstances are these fields set at a later point, and thus they
really have to be provided at construction time.

The patch also fixes a case there the MinorCPU creates a packet
without a valid address and size, only to later delete it.

base: Declare a type for context IDs

Context IDs used to be declared as ad hoc (usually as int). This
changeset introduces a typedef for ContextIDs and a constant for
invalid context IDs.

cpu: Update debug message from Fetch1 isDrained() in Minor

Fix a spurious %s and include the state of the Fetch1 stage in the
debug printout.

cpu: Fix Minor drain issues when switched out

The Minor CPU currently doesn't drain properly when it is switched
out. This happens because Fetch 1 expects to be in the FetchHalted
state when it is drained. However, because the CPU is switched out, it
is stuck in the FetchWaitingForPC state. Fix this by ignoring drain
requests and returning DrainState::Drained from MinorCPU::drain() if
the CPU is switched out. This is always safe since a switched out CPU,
by definition, doesn't have any instructions in flight.

cpu: Only activate thread 0 in Minor if the CPU is active

Minor currently activates thread 0 in startup() to work around an
issue where activateContext() is called from LiveProcess before the
process entry point is known. When activateContext() is called, Minor
creates a branch instruction to the process's entry point. The first
time it is called, the branch points to an undefined location (0). The
call in startup() updates the branch to point to the actual entry
point.

When instantiating a switched out Minor CPU, it still tries to
activate thread 0. This is clearly incorrect since a switched out CPU
can't have any active threads. This changeset adds a check to ensure
that the thread is active before reactivating it.

cpu: Fix drain issues in the Minor CPU

The drain refactor patches introduced a couple of bugs in the way
Minor handles draining. This patch fixes an incorrect assert and a
case of infinite recursion when the CPU signals drain done.

revert 5af8f40d8f2c

cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.

sim: Refactor and simplify the drain API

The drain() call currently passes around a DrainManager pointer, which
is now completely pointless since there is only ever one global
DrainManager in the system. It also contains vestiges from the time
when SimObjects had to keep track of their child objects that needed
draining.

This changeset moves all of the DrainState handling to the Drainable
base class and changes the drain() and drainResume() calls to reflect
this. Particularly, the drain() call has been updated to take no
parameters (the DrainManager argument isn't needed) and return a
DrainState instead of an unsigned integer (there is no point returning
anything other than 0 or 1 any more). Drainable objects should return
either DrainState::Draining (equivalent to returning 1 in the old
system) if they need more time to drain or DrainState::Drained
(equivalent to returning 0 in the old system) if they are already in a
consistent state. Returning DrainState::Running is considered an
error.

Drain done signalling is now done through the signalDrainDone() method
in the Drainable class instead of using the DrainManager directly. The
new call checks if the state of the object is DrainState::Draining
before notifying the drain manager. This means that it is safe to call
signalDrainDone() without first checking if the simulator has
requested draining. The intention here is to reduce the code needed to
implement draining in simple objects.

sim: Make the drain state a global typed enum

The drain state enum is currently a part of the Drainable
interface. The same state machine will be used by the DrainManager to
identify the global state of the simulator. Make the drain state a
global typed enum to better cater for this usage scenario.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.

cpu: Fix a bug in counting issued instructions in MinorCPU

The MinorCPU would count bubbles in Execute::issue as part of
the num_insts_issued and so sometimes reach the instruction
issue limit incorrectly.

Fixed by checking for a bubble in one new place.

mem, cpu: Add a separate flag for strictly ordered memory

The Request::UNCACHEABLE flag currently has two different
functions. The first, and obvious, function is to prevent the memory
system from caching data in the request. The second function is to
prevent reordering and speculation in CPU models.

This changeset gives the order/speculation requirement a separate flag
(Request::STRICT_ORDER). This flag prevents CPU models from doing the
following optimizations:

* Speculation: CPU models are not allowed to issue speculative
loads.

* Write combining: CPU models and caches are not allowed to merge
writes to the same cache line.

Note: The memory system may still reorder accesses unless the
UNCACHEABLE flag is set. It is therefore expected that the
STRICT_ORDER flag is combined with the UNCACHEABLE flag to prevent
this behavior.

cpu: Work around gcc 4.9 issues with Num_OpClasses

This patch fixes a recent issue with gcc 4.9 (and possibly more) being
convinced that indices outside the array bounds are used when
initialising the FUPool members.

cpu: re-organizes the branch predictor structure.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>

cpu: fix system total instructions accounting

The totalInstructions counter is only incremented when the whole instruction is
commited and not on every microop. It was incorrectly reset in atomic and
timing cpus.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>"

mem: restructure Packet cmd initialization a bit more

Refactor the way that specific MemCmd values are generated for packets.
The new approach is a little more elegant in that we assign the right
value up front, and it's also more amenable to non-heap-allocated
Packet objects.

Also replaced the code in the Minor model that was still doing it the
ad-hoc way.

This is basically a refinement of http://repo.gem5.org/gem5/rev/711eb0e64249.

mem: Split port retry for all different packet classes

This patch fixes a long-standing isue with the port flow
control. Before this patch the retry mechanism was shared between all
different packet classes. As a result, a snoop response could get
stuck behind a request waiting for a retry, even if the send/recv
functions were split. This caused message-dependent deadlocks in
stress-test scenarios.

The patch splits the retry into one per packet (message) class. Thus,
sendTimingReq has a corresponding recvReqRetry, sendTimingResp has
recvRespRetry etc. Most of the changes to the code involve simply
clarifying what type of request a specific object was accepting.

The biggest change in functionality is in the cache downstream packet
queue, facing the memory. This queue was shared by requests and snoop
responses, and it is now split into two queues, each with their own
flow control, but the same physical MasterPort. These changes fixes
the previously seen deadlocks.

arch: Make readMiscRegNoEffect const throughout

Finally took the plunge and made this apply to all ISAs, not just ARM.

sim: Clean up InstRecord

Track memory size and flags as well as add some comments and consts.

cpu: Fix retry bug in MinorCPU LSQ

minor: fixed LSQ MasterPortID

Minor was reporting the data cache access as ".inst" accesses.
This just switches the MasterPortID to dataMasterPortId.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>

cpu: Fix retries on barrier/store in Minor's store buffer

This patch fixes a case where a store in Minor's store buffer never
leaves the store buffer as it is pre-maturely counted as having been
issued, leading to the store buffer idling.

LSQ::StoreBuffer::numUnissuedAccesses should count the number of accesses
either in memory, or still in the store buffer after being completed.

For stores which are also barriers, the store will stay in the store
buffer for a cycle after it is completed and will be cleaned up by the
barrier clearing code (to ensure that barriers are completed in-order).
To acheive this, numUnissuedAccesses is not decremented when a store-barrier
is issued to memory, but when its barrier effect is cleared.

Without this patch, the correct behaviour happens when a memory transaction
is immediately accepted, but not if it needs a retry.

cpu: Fix memoryIssueLimit checking in Minor

This patch fixes the checking of the number of memory instructions issued
per cycles in the Minor CPU.

mem: Assume all dynamic packet data is array allocated

This patch simplifies how we deal with dynamically allocated data in
the packet, always assuming that it is array allocated, and hence
should be array deallocated (delete[] as opposed to delete). The only
uses of dataDynamic was in the Ruby testers.

The ARRAY_DATA flag in the packet is removed accordingly. No
defragmentation of the flags is done at this point, leaving a gap in
the bit masks.

As the last part the patch, it renames dataDynamicArray to dataDynamic.