arch, base, cpu, gpu, sim: Merge getMemProxy and getVirtProxy.

These two functions were performing the same function but had two
different names for historical reasons. This change merges them
together, keeping the getVirtProxy name to be consistent with the
getPhysProxy method used to get a non-translating proxy port.

Change-Id: Idd83c6b899f9343795075b030ccbc723a79e52a4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18581
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, base, sim: Demote (SE|FS)TranslatingPortProxy &s to PortProxy &s.

Al(most) all of the interesting differences between the two classes
have been removed. There are some control methods which are still
specific to each type which may require treating them as their true
type, but most code that consumes them doesn't need to worry about
which is which.

Change-Id: Ie592676f1e496c7940605b66e55cd7fae18e59d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18577
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, base, sim: Replace Copy(String)?(In|Out) with equivalent code.

This expands those functions into code which extracts the virt proxy
and then uses the appropriate method on it. This has two benefits.
First, the Copy* functions where mostly redundant wrappers around the
methods the proxy port already had. Second, using them forced a
particular port which might not actually be what the user wanted.

Change-Id: I62084631dd080061e3c74997125164f40da2d77c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18575
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: add a release parameter to Process.py

Set the default release to that single value for all ISAs.

glibc has checks for the kernel version based on uname, and refuses
to start any syscall emulation programs if those checks don't pass with
error:

FATAL: kernel too old

The ideal solution to this problem is to actually implement all missing
system calls for the required kernel version and bumping the release
accordingly.

However, it is very hard to implement all missing syscalls and verify
compliance.

Previously, we have simply bumped the version manually from time to
time when major glibc versions started breaking.

This commit alleviates the problem in two ways.

Firstly, having a single kernel version for all versions means that it is
easier to bump all versions at once.

Secondly, it makes it is possible to set the release with a parameter,
which in turn can be set from the command line with:

se.py --param 'system.cpu[:].workload[:].release = "4.18.0"'

Change-Id: I9e3c31073bfe68735f7b0775c8e299aa62b98222
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17849
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, base, dev, sim: Remove now unnecessary casts from PortProxy methods.

Change-Id: Ia73b2d86a10d02fa09c924a4571477bb5f200eb7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18572
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim-se: change syscall function signature

The system calls had four parameters. One of the parameters
is ThreadContext and another is Process. The ThreadContext
holds the value of the current process so the Process parameter
is redundant since the system call functions already have
indirect access.

With the old API, it is possible to call into the functions with
the wrong supplied Process which could end up being a confusing
error.

This patch removes the redundancy by forcing access through the
ThreadContext field within each system call.

Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mips: Add an object file loader for linux.

Change-Id: Icae6430a210076117cf2ceadce52d6efbe58a5f3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18586
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Stop using TheISA within the ISAs.

We know for sure what the ISA is, so there's no need for the
indirection.

Change-Id: I73ff04c50890d40a4c7f40caeee746b68b846cb3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18488
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mips: Implement readRegOtherThread and setRegOtherThread directly.

These accessors can be implemented as helper functions within MIPS
without having to plumb them through a bunch of common interfaces.
There are a few problems with the way they were implemented which are
carried forward to this new implementation as well. That includes
hiding the register accesses from the ISA parser and therefore the
CPU's dependency tracking, potentially panicing or accessing a non
existent thread based on a possible set of input values, and modifying
register values even if an instruction is being executed speculatively.

Fixing these problems would be fairly involved and require changing how
dependencies are tracked in all the CPUs so that they can act across
threads, and also how registers are handled in the ISA description
itself.

The original implementation just punted on making this work in CPUs
other than the minor CPU (and potentially one or more CPU models that
were not and/or are not in the code base). Where as that implementation
might have paniced if these methods were called, this will attempt to
work, but may have incorrect behavior based on the limitations
described above. I'd consider this an acceptable tradeoff, at least for
the time being.

Change-Id: I94adceafb9812a8641c76ea3518c3285c31baf51
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18435
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, sim: Simplify the AuxVector type.

The AuxVector type has a bunch of accessors which just give access to
the underlying variables through references. We might as well just make
those members accessible directly.

Also, the AuxVector doesn't need to handle endianness flips itself. We
can tell the byteswap mechanism how to flip an AuxVector, and let it
handle that for us.

This gets rid of the entire .cc file which was complicated by trying
to both hide the ISA specific endianness translations, and instantiate
templated functions in a .cc.

Change-Id: I433cd61e73e0b067b6d628fba31be4a4ec1c4cf0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18373
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove the ISA specialized versions of port proxy's read/write.

These selected their behavior based on ifdefs and had to be disabled
when on the NULL ISA. The versions which take an explicit endianness
have been renamed to just read/write instead of readGtoH and writeHtoG
since the direction of the translation is obvious from context.

Change-Id: I6cfbfda6c4481962d442d3370534e50532d41814
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18372
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Removed inconsistency in O3* debug msgs

Added consistency in the DEBUG message form, to allow a better parsing.
Fixed sn/tid type parameter.
Removed some annoying newlines

Change-Id: I4761c49fc12b874a7d8b46779475b606865cad4b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17248
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

python: Don't assume SimObjects live in the global namespace

The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.

Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-mips: Remove unused Python file

Change-Id: I7155915fccdec1d9f116f2a8617474188a91165b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16302
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu, arch: Replace the CCReg type with RegVal.

Most architectures weren't using the CCReg type, and in x86 and arm
it was already a uint64_t.

Change-Id: I0b3d5e690e6b31db6f2627f449c89bde0f6750a6
Reviewed-on: https://gem5-review.googlesource.com/c/14515
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

mips: Stop using architecture specific register types.

Change-Id: I764f6eea214ba4e03cc0fe19a21abcb0ebd04408
Reviewed-on: https://gem5-review.googlesource.com/c/14462
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: cpu: Rename *FloatRegBits* to *FloatReg*.

Now that there's no plain FloatReg, there's no reason to distinguish
FloatRegBits with a special suffix since it's the only way to read or
write FP registers.

Change-Id: I3a60168c1d4302aed55223ea8e37b421f21efded
Reviewed-on: https://gem5-review.googlesource.com/c/14460
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

base: arch: Get rid of the now unused FloatRegVal type.

This type is no longer used since FP registers are accessed as integer
bit patterns.

Change-Id: I1070f9443d6247165fd64c6bc041811c28287e9f
Reviewed-on: https://gem5-review.googlesource.com/c/14459
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: cpu: Stop passing around misc registers by reference.

These values are all basic integers (specifically uint64_t now), and
so passing them by const & is actually less efficient since there's a
extra level of indirection and an extra value, and the same sized value
(a 64 bit pointer vs. a 64 bit int) is being passed around.

Change-Id: Ie9956b8dc4c225068ab1afaba233ec2b42b76da3
Reviewed-on: https://gem5-review.googlesource.com/c/13626
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

sim-se: add syscalls related to polling

Fix poll so that it will use the syscall retry capability
instead of causing a blocking call.

Add the accept and wait4 system calls.

Add polling to read to remove deadlocks that occur in the
event queue that are caused by blocking system calls.

Modify the write system call to return an error number in
case of error.

Change-Id: I0b4091a2e41e4187ebf69d63e0088f988f37d5da
Reviewed-on: https://gem5-review.googlesource.com/c/12115
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch: Make the ISA register types aliases for the global types.

The ISA specific types can thus be phased out.

Change-Id: I8ea531a099fad140a4ec9c91cd972fe044111d60
Reviewed-on: https://gem5-review.googlesource.com/c/13623
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch, cpu: Remove float type accessors.

Use the binary accessors instead.

Change-Id: Iff1877e92c79df02b3d13635391a8c2f025776a2
Reviewed-on: https://gem5-review.googlesource.com/c/14457
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch, base, cpu, gpu, mem: Replace assert(0 or false with panic.

Neither assert(0) nor assert(false) give any hint as to why control
getting to them is bad, and their more descriptive versions,
assert(0 && "description") and assert(false && "description"), jury
rig assert to add an error message when the utility function panic()
already does that directly with better formatting options.

This change replaces that flavor of call to assert with panic, except
in the actual code which processes the formatting that panic uses (to
avoid infinitely recurring error handling), and in some *.sm files
since I don't know what rules those have to follow and don't want to
accidentaly break them.

Change-Id: I8addfbfaf77eaed94ec8191f2ae4efb477cefdd0
Reviewed-on: https://gem5-review.googlesource.com/c/14636
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mips: Change the integer and fp register widths to be 64 bits.

This makes them more consistent with the other architectures, helping
to facilitate having a single, unified type across ISAs in the future.

Change-Id: I65efb10e39d453281b8429eeedbb46fa6b023a2b
Reviewed-on: https://gem5-review.googlesource.com/c/13620
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mips: Clean up type overrides for operands.

For operands which default to uw (uint32_t), there's no reason to
explicitly specify that all over the place. Also, when assigning to a
32 bit value which is supposed to be the full width of the resulting
register, there's no reason to override the value to be signed. If the
value is expanded into a larger value, then extra bits may get set
unintentionally through sign extension. Even if an instruction
produces a value which should be interpreted as signed, it will still
only produce a value of a certain predefined width, even if that answer
ends up stored in a larger variable.

Change-Id: I048d68c5dd08a1d40e8117ae9d36d70e05ec21c8
Reviewed-on: https://gem5-review.googlesource.com/c/13618
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

mips: Explicitly truncate the syscall return value down to 32 bits.

The IntReg type is 32 bits, and using it to cast the syscall return
value is appropriate, but we're attempting to get rid of the ISA
specific register types.

Change-Id: I42496dd2cc086a6b718e1ce087fef81bb897d02f
Reviewed-on: https://gem5-review.googlesource.com/c/13619
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch: Get rid of the unused type AnyReg.

This type is defined for all the ISAs but isn't used by anything.

Change-Id: I659a0c5abc7883d82fedd1cac2cd103612d315c8
Reviewed-on: https://gem5-review.googlesource.com/c/13539
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mips: Use little endian packet accessors.

We know data is little endian, so we can use those accessors
explicitly.

Change-Id: I6220a543686b1d45d26973391b028dc04ce85dd2
Reviewed-on: https://gem5-review.googlesource.com/c/13460
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

syscall_emul: expand AuxVector class

The AuxVector class is responsible for holding Process data.
The data that it holds is normally setup by an OS kernel in
the process address space. The purpose behind doing this is
to pass in information that the process will need for various
reasons. (Check out the enum in the header file for an idea of
what the AuxVector holds.)

The AuxVector struct was changed into a class and encapsulation
methods were added to protect access to the member variables.

The host ISA may have a different endianness than the simulated
ISA. Since data is passed between the process address space and
the simulator for auxiliary vectors, we need to worry about
maintaining endianness for the right context.

Change-Id: I32c5ac4b679559886e1efeb4b5483b92dfc94af9
Reviewed-on: https://gem5-review.googlesource.com/12109
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

misc: Substitute pointer to Request with aliased RequestPtr

Every usage of Request* in the code has been replaced with the
RequestPtr alias. This is a preparing patch for when RequestPtr will be
the typdefed to a smart pointer to Request rather then a raw pointer to
Request.

Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10995
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch: Fix all override related warnings.

Clang has started(?) reporting override related warnings, something gcc
apparently did before, but was disabled in the SConstruct. Rather than
disable the warnings in for clang as well, this change fixes the
warnings. A future change will re-enable the warnings for gcc.

Change-Id: I3cc79e45749b2ae0f9bebb1acadc56a3d3a942da
Reviewed-on: https://gem5-review.googlesource.com/9343
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: Add a virtual asBytes function to the StaticInst class.

This function takes a pointer to a buffer and the current size of the
buffer as a pass by reference argument. If the size of the buffer is
sufficient, the function stores a binary representation of itself
(generally the ISA defined instruction encoding) in the buffer, and
sets the size argument to how much space it used. This could be used
by ISAs which have two instruction sizes (ARM and thumb, for example).
If the buffer size isn't sufficient, then the size parameter should be
set to what size is required, and then the function should return
without modifying the buffer.

The buffer itself should be aligned to the same standard as memory
returned by new, specifically "The pointer returned shall be suitably
aligned so that it can be converted to a pointer of any complete object
type and then used to access the object or array in the storage
allocated...". This will avoid having to memcpy buffers to avoid
unaligned accesses.

To standardize the representation of the data, it should be stored in
the buffer as little endian. Since most hosts (including ARM and x86
hosts) will be little endian, this will almost always be a no-op.

Change-Id: I2f31aa0b4f9c0126b44f47a881c2901243279bd6
Reviewed-on: https://gem5-review.googlesource.com/7562
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch, mem: Make the page table lookup function return a pointer.

This avoids having a copy in the lookup function itself, and the
declaration of a lot of temporary TLB entry pointers in callers. The
gpu TLB seems to have had the most dependence on the original signature
of the lookup function, partially because it was relying on a somewhat
unsafe copy to a TLB entry using a base class pointer type.

Change-Id: I8b1cf494468163deee000002d243541657faf57f
Reviewed-on: https://gem5-review.googlesource.com/7343
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim, arch, base: Refactor the base remote GDB class.

Fold the GDBListener class into the main BaseRemoteGDB class, move
around a bunch of functions, convert a lot of internal functions to
be private, move some functions into the .cc, make some functions
non-virtual which didn't really need to be overridden.

Change-Id: Id0832b730b0fdfb2eababa5067e72c66de1c147d
Reviewed-on: https://gem5-review.googlesource.com/7422
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch, mem, sim: Consolidate and rename the SE mode page table classes.

Now that Nothing inherits from PageTableBase directly, it can be
merged into FuncPageTable. This change also takes the opportunity to
rename the combined class to EmulationPageTable which lets you know
that it's specifically for SE mode.

Also remove the page table entry cache since it doesn't seem to
actually improve performance. The TLBs likely absorb the majority of
the locality, essentially acting like a cache like they would in real
hardware.

Change-Id: If1bcb91aed08686603bf7bee37298c0eee826e13
Reviewed-on: https://gem5-review.googlesource.com/7342
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: Fix a fatal_if in most of the arch's process classes.

When switching an assert to a fatal while addressing recent review
feedback, I forgot to reverse the polarity of the condition, making
the fatal fire in exactly the opposite of the conditions it was meant
to.

Change-Id: Icf49864ef449052bbb0d427dca786006166575c4
Reviewed-on: https://gem5-review.googlesource.com/7381
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch,mem: Remove the default value for page size.

This breaks one more architecture dependence outside of the ISAs.

Change-Id: I071f9ed73aef78e1cd1752247c183e30854b2d28
Reviewed-on: https://gem5-review.googlesource.com/6982
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>

arch,mem: Move page table construction into the arch classes.

This gets rid of an awkward NoArchPageTable class, and also gives the
arch a place to inject ISA specific parameters (specifically page size)
without having to have TheISA:: in the generic version of these types.

Change-Id: I1412f303460d5c43dafdb9b3cd07af81c908a441
Reviewed-on: https://gem5-review.googlesource.com/6981
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

style: change C/C++ source permissions to noexec

Several files in the repository were tracked with execute permissions
even though the files are just normal C/C++ files (and the one .isa).

Change-Id: I976b096acab4a1fc74c5699ef1f9b222c1e635c2
Reviewed-on: https://gem5-review.googlesource.com/7241
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

alpha,arm,mips,power,riscv,sparc,x86,cpu: Get rid of ISA_HAS_DELAY_SLOT.

This constant is, first, a #define, and second only used in one place.

In that one place, it appears that the code it guards is no longer
necessary in general. It was originally written to avoid refetching a
block of data that you're still in, even if you've moved slightly
farther in it because you're skipping the next instruction due to an
annulled branch delay slot. In reality however, in SPARC, the one ISA
I'm aware of which has this sort of branching behavior, the PC state
object will correctly determine that no branch is happening in these
cases. Code lower down in the loop will then recompute where fetching
should continue based on the next PC, automatically skipping the
annulled branch slot without misinterpretting the gap as a branch.

This change therefore also removes this block of code.

Change-Id: I820ebc9df10aeb4fcb69c12f6a784e9ec616743c
Reviewed-on: https://gem5-review.googlesource.com/6821
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

alpha,arm,mips,power,riscv,sparc,x86: Get rid of TheISA::NoopMachInst.

It's no longer used.

Change-Id: I4a71bcb214f1bb186b92ef50841eca635e6701c5
Reviewed-on: https://gem5-review.googlesource.com/6826
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch,cpu: "virtualize" the TLB interface.

CPUs have historically instantiated the architecture specific version
of the TLBs to avoid a virtual function call, making them a little bit
more dependent on what the current ISA is. Some simple performance
measurement, the x86 twolf regression on the atomic CPU, shows that
there isn't actually any performance benefit, and if anything the
simulator goes slightly faster (although still within margin of error)
when the TLB functions are virtual.

This change switches everything outside of the architectures themselves
to use the generic BaseTLB type, and then inside the ISA for them to
cast that to their architecture specific type to call into architecture
specific interfaces.

The ARM TLB needed the most adjustment since it was using non-standard
translation function signatures. Specifically, they all took an extra
"type" parameter which defaulted to normal, and translateTiming
returned a Fault. translateTiming actually doesn't need to return a
Fault because everywhere that consumed it just stored it into a
structure which it then deleted(?), and the fault is stored in the
Translation object when the translation is done.

A little more work is needed to fully obviate the arch/tlb.hh header,
so the TheISA::TLB type is still visible outside of the ISAs.
Specifically, the TlbEntry type is used in the generic PageTable which
lives in src/mem.

Change-Id: I51b68ee74411f9af778317eff222f9349d2ed575
Reviewed-on: https://gem5-review.googlesource.com/6921
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu,alpha,mips,power,riscv,sparc: Get rid of eaComp and memAccInst.

Neither of these were used, particularly memAccInst.

Change-Id: I4ac9e44cf624e5de42519d586d7b699f08a2cdfc
Reviewed-on: https://gem5-review.googlesource.com/6601
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Rename misc.(hh|cc) to logging.(hh|cc)

These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).

Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

alpha,arm,mips,power,riscv,sparc,x86: Merge exec decl templates.

In the ISA instruction definitions, some classes were declared with
execute, etc., functions outside of the main template because they
had CPU specific signatures and would need to be duplicated with
each CPU plugged into them. Now that the instructions always just
use an ExecContext, there's no reason for those templates to be
separate. This change folds those templates together.

Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa
Reviewed-on: https://gem5-review.googlesource.com/5401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

alpha,arm,mips,power,riscv,sparc,x86,isa: De-specialize ExecContexts.

The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.

Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.

Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Stop generating inc.d in the isa parser.

Generating dependency/build product information in the isa parser breaks scons
idea of how a build is supposed to work. Arm twisting it into working forced
a lot of false dependencies which slowed down the build.

Change-Id: Iadee8c930fd7c80136d200d69870df7672a6b3ca
Reviewed-on: https://gem5-review.googlesource.com/5081
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

mem: Signal the local monitor when clearing the global monitor

ARM systems require the coordination of the global and local
monitors. When the system is run without caches the global monitor is
implemented in the abstract memory object. This change adds a callback
from the abstract memory that notifies the local monitor when the
global monitor is cleared.

Additionally, for ARM systems the local monitor signals the event
register and wakes the thread context up. Subsequent wait-for-event
(WFE) instructions will be immediately signaled.

Change-Id: If6c038f3a6bea7239ba4258f07f39c7f9a30500b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3760
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

stats: Get rid of some kernel stats related cruft.

The kernel stat mechanism should really be refactored and moved somewhere
else, but in the mean time there's some old cruft that can be cleared away.

Change-Id: I21e725de590dda0d20bf3bc675bbe976c7b1bd86
Reviewed-on: https://gem5-review.googlesource.com/4600
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mips, x86: Refactor some Event subclasses into lambdas

Change-Id: I09570e569efe55f5502bc201e03456738999e714
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3920
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu: Added interface for vector reg file

This patch adds some more functionality to the cpu model and the arch to
interface with the vector register file.

This change consists mainly of augmenting ThreadContexts and ExecContexts
with calls to get/set full vectors, underlying microarchitectural elements
or lanes. Those are meant to interface with the vector register file. All
classes that implement this interface also get an appropriate implementation.

This requires implementing the vector register file for the different
models using the VecRegContainer class.

This change set also updates the Result abstraction to contemplate the
possibility of having a vector as result.

The changes also affect how the remote_gdb connection works.

There are some (nasty) side effects, such as the need to define dummy
numPhysVecRegs parameter values for architectures that do not implement
vector extensions.

Nathanael Premillieu's work with an increasing number of fixes and
improvements of mine.

Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues and CC reg free list initialisation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2705

cpu: Simplify the rename interface and use RegId

With the hierarchical RegId there are a lot of functions that are
redundant now.

The idea behind the simplification is that instead of having the regId,
telling which kind of register read/write/rename/lookup/etc. and then
the function panic_if'ing if the regId is not of the appropriate type,
we provide an interface that decides what kind of register to read
depending on the register type of the given regId.

Change-Id: I7d52e9e21fc01205ae365d86921a4ceb67a57178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2702

arch, cpu: Architectural Register structural indexing

Replace the unified register mapping with a structure associating
a class and an index. It is now much easier to know which class of
register the index is referring to. Also, when adding a new class
there is no need to modify existing ones.

Change-Id: I55b3ac80763702aa2cd3ed2cbff0a75ef7620373
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2700

base, sim, arch: Fix clang 5.0 warnings

Compiling gem5 with recent version of clang (4 and 5) triggers
warnings that are treated as errors:

* Global templatized static functions result in a warning if they
are not used. These should either be declared as static inline or
without the static identifier to avoid the warning.

* Some templatized classes contain static variables. The
instantiated versions of these variables / templates need to be
explicitly declared to avoid a compiler warning.

Change-Id: Ie8261144836e94ebab7ea04ccccb90927672c257
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3420
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

base: Refactor the GDB code.

The new version modularizes the implementation of the various commands,
gets rid of dynamic allocation of the register cache, fixes some small
style problems, and uses exceptions to simplify error handling internal to
the GDB stub.

Change-Id: Iff3548373ce4adfb99106a810f5713b769df89b2
Reviewed-on: https://gem5-review.googlesource.com/3280
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

syscall-emul: Move memState into its own file

The Process class is full of implementation details and
structures related to SE Mode. This changeset factors out an
internal class from Process and moves it into a separate file.
The purpose behind doing this is to clean up the code and make
it a bit more modular.

Change-Id: Ic6941a1657751e8d51d5b6b1dcc04f1195884280
Reviewed-on: https://gem5-review.googlesource.com/2263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

syscall_emul: [PATCH 15/22] add clone/execve for threading and multiprocess simulations

Modifies the clone system call and adds execve system call. Requires allowing
processes to steal thread contexts from other processes in the same system
object and the ability to detach pieces of process state (such as MemState)
to allow dynamic sharing.

syscall_emul: [patch 13/22] add system call retry capability

This changeset adds functionality that allows system calls to retry without
affecting thread context state such as the program counter or register values
for the associated thread context (when system calls return with a retry
fault).

This functionality is needed to solve problems with blocking system calls
in multi-process or multi-threaded simulations where information is passed
between processes/threads. Blocking system calls can cause deadlock because
the simulator itself is single threaded. There is only a single thread
servicing the event queue which can cause deadlock if the thread hits a
blocking system call instruction.

To illustrate the problem, consider two processes using the producer/consumer
sharing model. The processes can use file descriptors and the read and write
calls to pass information to one another. If the consumer calls the blocking
read system call before the producer has produced anything, the call will
block the event queue (while executing the system call instruction) and
deadlock the simulation.

The solution implemented in this changeset is to recognize that the system
calls will block and then generate a special retry fault. The fault will
be sent back up through the function call chain until it is exposed to the
cpu model's pipeline where the fault becomes visible. The fault will trigger
the cpu model to replay the instruction at a future tick where the call has
a chance to succeed without actually going into a blocking state.

In subsequent patches, we recognize that a syscall will block by calling a
non-blocking poll (from inside the system call implementation) and checking
for events. When events show up during the poll, it signifies that the call
would not have blocked and the syscall is allowed to proceed (calling an
underlying host system call if necessary). If no events are returned from the
poll, we generate the fault and try the instruction for the thread context
at a distant tick. Note that retrying every tick is not efficient.

As an aside, the simulator has some multi-threading support for the event
queue, but it is not used by default and needs work. Even if the event queue
was completely multi-threaded, meaning that there is a hardware thread on
the host servicing a single simulator thread contexts with a 1:1 mapping
between them, it's still possible to run into deadlock due to the event queue
barriers on quantum boundaries. The solution of replaying at a later tick
is the simplest solution and solves the problem generally.

syscall_emul: [patch 8/22] refactor process class

Moves aux_vector into its own .hh and .cc files just to get it out of the
already crowded Process files. Arguably, it could stay there, but it's
probably better just to move it and give it files.

The changeset looks ugly around the Process header file, but the goal here is
to move methods and members around so that they're not defined randomly
throughout the entire header file. I expect this is likely one of the reasons
why I several unused variables related to this class. So, the methods are
declared first followed by members. I've tried to aggregate them together
so that similar entries reside near one another.

There are other changes coming to this code so this is by no means the
final product.

syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead

The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.

style: [patch 3/22] reduce include dependencies in some headers

Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.

syscall_emul: [patch 2/22] move SyscallDesc into its own .hh and .cc

The class was crammed into syscall_emul.hh which has tons of forward
declarations and template definitions. To clean it up a bit, moved the
class into separate files and commented the class with doxygen style
comments. Also, provided some encapsulation by adding some accessors and
a mutator.

The syscallreturn.hh file was renamed syscall_return.hh to make it consistent
with other similarly named files in the src/sim directory.

The DPRINTF_SYSCALL macro was moved into its own header file with the
include the Base and Verbose flags as well.

style: [patch 1/22] use /r/3648/ to reorganize includes

isa: Modify get/check interrupt routines

Make it so that getInterrupt *always* returns an interrupt if
checkInterrupts() returns true. This fixes/simplifies handling
of interrupts on the SMT FS CPUs (currently minor).

stats: Fixing regStats function for some SimObjects

Fixing an issue with regStats not calling the parent class method
for most SimObjects in Gem5. This causes issues if one adds new
stats in the base class (since they are never initialized properly!).

Change-Id: Iebc5aa66f58816ef4295dc8e48a357558d76a77c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove threadId from memory request class

In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.

This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.

Revert to 74c1e6513bd0 (sim: Thermal support for Linux)

power: Add power states to ClockedObject

Add 4 power states to the ClockedObject, provides necessary access functions
to check and update the power state. Default power state is UNDEFINED, it is
responsibility of the respective simulation model to provide the startup state
and any other logic for state change.

Add number of transition stat.
Add distribution of time spent in clock gated state.
Add power state residency stat.

Add dump call back function to allow stats update of distribution and residency
stats.

syscall_emul: remove mmapFlagTable

After all this it turns out we don't even use it.

syscall_emul: factor out flag tables into common file

The openFlagTable and mmapFlagTables for emulated Linux
platforms are basically identical, but are specified
repetitively for every platform. Use a common file
that gets included for each platform so that we only
have one copy, making them more consistent and simplifying
changes (like adding #ifdefs).

In the process, made some minor fixes that slipped through
due to previous inconsistencies, and added more #ifdefs
to try to fix building on alternative hosts.

base: support dynamic loading of Linux ELF objects in SE mode

syscall_emul: move mmapGrowsDown() to LiveProcess

The mmapGrowsDown() method was a static method on the OperatingSystem
class (and derived classes), which worked OK for the templated syscall
emulation methods, but made it hard to access elsewhere. This patch
moves the method to be a virtual function on the LiveProcess method,
where it can be overridden for specific platforms (for now, Alpha).

This patch also changes the value of mmapGrowsDown() from being false
by default and true only on X86Linux32 to being true by default and
false only on Alpha, which seems closer to reality (though in reality
most people use ASLR and this doesn't really matter anymore).

In the process, also got rid of the unused mmap_start field on
LiveProcess and OperatingSystem mmapGrowsUp variable.

syscall_emul: extend mmap system call to support file backed mmaps

For O3, which has a stat that counts reg reads, there is an additional
reg read per mmap() call since there's an arg we no longer ignore.
Otherwise, stats should not be affected.

syscall_emul: add many Linux kernel flags

syscall_emul: rename OpenFlagTransTable struct

The structure definition only had the open system call flag set in mind when
it was named, so we rename it here with the intention of using it to define
additional tables to translate flags for other system calls in the future.

scons: Add missing override to appease clang

Make clang happy...again.

style: fix missing spaces in control statements

Result of running 'hg m5style --skip-all --fix-control -a'.

style: remove trailing whitespace

Result of running 'hg m5style --skip-all --fix-white -a'.

cpu. arch: add initiateMemRead() to ExecContext interface

For historical reasons, the ExecContext interface had a single
function, readMem(), that did two different things depending on
whether the ExecContext supported atomic memory mode (i.e.,
AtomicSimpleCPU) or timing memory mode (all the other models).
In the former case, it actually performed a memory read; in the
latter case, it merely initiated a read access, and the read
completion did not happen until later when a response packet
arrived from the memory system.

This led to some confusing things, including timing accesses
being required to provide a pointer for the return data even
though that pointer was only used in atomic mode.

This patch splits this interface, adding a new initiateMemRead()
function to the ExecContext interface to replace the timing-mode
use of readMem().

For consistency and clarity, the readMemTiming() helper function
in the ISA definitions is renamed to initiateMemRead() as well.
For x86, where the access size is passed in explicitly, we can
also get rid of the data parameter at this level. For other ISAs,
where the access size is determined from the type of the data
parameter, we have to keep the parameter for that purpose.

arch: get rid of unused LargestRead typedef

scons: Enable -Wextra by default

Make best use of the compiler, and enable -Wextra as well as
-Wall. There are a few issues that had to be resolved, but they are
all trivial.

arm: remote GDB: rationalize structure of register offsets

Currently, the wire format of register values in g- and G-packets is
modelled using a union of uint8/16/32/64 arrays. The offset positions
of each register are expressed as a "register count" scaled according
to the width of the register in question. This results in counter-
intuitive and error-prone "register count arithmetic", and some
formats would even be altogether unrepresentable in such model, e.g.
a 64-bit register following a 32-bit one would have a fractional index
in the regs64 array.
Another difficulty is that the array is allocated before the actual
architecture of the workload is known (and therefore before the correct
size for the array can be calculated).

With this patch I propose a simpler mechanism for expressing the
register set structure. In the new code, GdbRegCache is an abstract
class; its subclasses contain straightforward structs reflecting the
register representation. The determination whether to use e.g. the
AArch32 vs. AArch64 register set (or SPARCv8 vs SPARCv9, etc.) is made
by polymorphically dispatching getregs() to the concrete subclass.
The subclass is not instantiated until it is needed for actual
g-/G-packet processing, when the mode is already known.

This patch is not meant to be merged in on its own, because it changes
the contract between src/base/remote_gdb.* and src/arch/*/remote_gdb.*,
so as it stands right now, it would break the other architectures.
In this patch only the base and the ARM code are provided for review;
once we agree on the structure, I will provide src/arch/*/remote_gdb.*
for the other architectures; those patches could then be merged in
together.

Review Request: http://reviews.gem5.org/r/3207/
Pushed by Joel Hestness <jthestness@gmail.com>

misc: Remove redundant compiler-specific defines

This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.

isa: Add parameter to pick different decoder inside ISA

The decoder is responsible for splitting instructions in micro
operations (uops). Given that different micro architectures may split
operations differently, this patch allows to specify which micro
architecture each isa implements, so different cores in the system can
split instructions differently, also decoupling uop splitting
(microArch) from ISA (Arch). This is done making the decodification
calls templates that receive a type 'DecoderFlavour' that maps the
name of the operation to the class that implements it. This way there
is only one selection point (converting the command line enum to the
appropriate DecodeFeatures object). In addition, there is no explicit
code replication: template instantiation hides that, and the compiler
should be able to resolve a number of things at compile-time.

revert 5af8f40d8f2c

cpu: implements vector registers

This adds a vector register type. The type is defined as a std::array of a
fixed number of uint64_ts. The isa_parser.py has been modified to parse vector
register operands and generate the required code. Different cpus have vector
register files now.

sim: Refactor the serialization base class

Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:

* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.

* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.

* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).

* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.

* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.