arch-arm: PSTATE.PAN changes should inval cached regs in TLB

Change-Id: Id94e355fec345d2e952539a7dce7fbd21ed220c6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20983
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix Data Abort ISS when caused by Atomic operation

Data Aborts caused by an atomic instruction have a special rule for
their syndrome:
From a ISS point of view they count as read if a read to that address
would generate a fault; they count as writes otherwise (ISS.WnR bit)
This patch is implementing this in the TLB. For permission faults we
need to explicitly check if a read would trigger a fault
(e.g. checking for the AP bits) since permissions can allow read-only
accesses.
For other MMU exceptions (like translation faults) we are confident the
nature of the access doesn't affect the genration of a fault.
This means that if the access is atomic, we treat it as a read from an
ISS.WnR point of view.

Change-Id: Ia524aa6ae07f81513cdc26c516b5fd9b01a931c3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20981
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: ISV bit in DataAbort should check for translation stage

According to the ESR spec, the ISV bit is set to 1 only for stage 2
aborts.

Change-Id: Id524ef36e82184f741e968ddba04ca8ccdd4ad58
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20980
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: PSTATE.PAN affecting EL2 only when HCR_EL2.E2H=1

Change-Id: I6df0cdcbadca17f30d3de3bed887f75c739b00f0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20979
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_IGRPEN1_EL1 using AA64 banking

Change-Id: Ic08ac1e7f3ebef408a83aa068ce15e9dfe2aa3cd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20628
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_AP1R0_EL1 using AA64 banking

Change-Id: Ide93464f62288fbe8f409f718487a15512c01295
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20627
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_CTLR_EL1 using AA64 banking

Change-Id: Ib1691f1cba08251a36ceb959849b61c33cc3e93b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20626
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: MISCREG_ICC_BPR1_EL1 using AA64 banking

Change-Id: Ib30c7a49490f05f88ddfd7572dd360cb92647f81
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20625
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add explicit AArch64 MiscReg banking

Change-Id: I89836d14491a51b1573f45c8012e3ad12b107d24
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20623
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Use same template across all MSR inst

Change-Id: Ifb9f1db288e401761b71ccf426e370c475e5663f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20622
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: SySDC64 Instructions (CMO) using MiscRegIndex

Change-Id: Ia66d6abf965b1d33579e8fa048608d99c93ff2ce
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20621
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: fix GDB stub after SVE

The SVE patches made registers longer by increasing NumVecElemPerVecReg,
but the GDB XML was not updated to account for that, and as a result GDB
connections were failing with:

Remote 'g' packet reply is too long

This commit introduces NumVecElemPerSimdVecReg which counts only the SIMD
register sizes to get it back working. SVE GDB support is not added here.

Change-Id: I4191b9f1999ae02b0308863db4cc9b5b16a27d6d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20468
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: SGI registers undecoded in AArch32

Change-Id: I64d3e639e1beaa507263637d59499aafeb5a19f8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20612
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix read/setMiscReg for AArch32 GICv3 ICC regs

The readMiscReg/setMiscReg methods were not forwarding register
reads/writes to the cpu interface when in AArch32.

Change-Id: Ide983e793b8033a88d31fe6ea87eaeffe9b093f5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20611
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm,kvm: Fix python imports from global namespace

Change-Id: I31bd3563c2427efd7e520f714b1ca6f480fa4e85
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20491
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, cpu: fix ARM ubsan build on GCC 7.4.0

In src/cpu/reg_class.hh, numPinnedWrites was unset because the
constructors were not well factored out.

Change-Id: Ib2fc8d34a1adf5c48826d257a31dd24dfa64a08a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20048
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix implicit fallthrough build errors

1942b21713 introduced implicit-fallthrough errors when compiled with
GCC 8. This change adds M5_UNREACHABLE in the default case.

Change-Id: I220f2b3fe39b5c3a65c0dd390915bffeafb28962
Signed-off-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20268
Reviewed-by: Jordi Vaquero <jordi.vaquero@metempsy.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Replace occ of opModeToEL(currOpMode/cpsr) with currEL

Change-Id: I739a9be03ea5caa63540c62fd110eee86a058c4c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20252
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Replace direct use cpsr.el with currEL helper

The patch is replacing it in places where the current EL could be using
AArch32, hence leading to an incorrect ExceptionLevel.

Change-Id: I99b75af2668f2c38fd88bec62e985ab7dbea80dc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20251
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Overload currEL helper with CPSR argument

Change-Id: I1edabc61637ecb9d30bca34b5dbcf1de12b35fe0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20250
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Rewrite the currEL helper method to use opModeToEL

Direct use of cpsr.el should be discouraged: it should be used when
in AArch64 only; when in AArch32 it won't return the matching EL.

Eg: when in Supervisor Mode (EL1), CPSR.M<3,0> (mode) is 0b0011,
and cpsr.el will return 0 (EL0)

Change-Id: I5504bd1f59980f79b2607cce435ea09245de12e5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20249
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Added LD/ST<op> atomic instruction family and SWP instrs

Adding LD/ST/SWP family of instructions, LD/ST include a set of
operations like ADD/CLR/EOR/SET/UMAX/UMIN/SMAX/SMIN
This commit includes:
+ Instruction decode
+ Instruction functional code
+ New set of skeletons for Ex/Com/Ini/Constructor and declaration.

Change-Id: Ieea8d4256807e004d2f8aca8f421b3df8d76b116
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19812
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Adding CAS/CASP AMO instr including new TypedAtomic func

CAS/CASP atomic instruction implementation
This change includes:
+ Instructions decode
+ new amo64.isa file where CAS/CASP main functional code is implemented
+ mem64.isa include Execute/complete/initiatie skeletons,
contructor and declarator
+ Added TypedAtomic function for pair register CASP instruction

Change-Id: I4a4acdec4ab1c8b888f10ef5dc1e896be8c432bf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19811
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Add TypeAtomicOp class to be used by new atomic instructions

Creating a new object TypeAtomicOp that will be used by the atomic
instructions following gem5 AMO feature.

Change-Id: If082b596fb37d7a1cb569a4320c23505591df6a5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19810
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: adding register control flags enabling LSE implementation

Added changes on arch-arm architecture to accept Atomic instructions
following ARM v8.1 documentation. That includes enabling atomic bit
in ID registers and add have_lse variable into arm system.

Change-Id: Ic28d3215d74ff129142fb51cb2fa217d3b1482de
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19809
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Implement ARMv8.1-PAN, Privileged access never

ARMv8.1-PAN adds a new bit to PSTATE. When the value of this PAN state
bit is 1, any privileged data access from EL1 or EL2 to a virtual memory
address that is accessible at EL0 generates a Permission fault.
This feature is mandatory in ARMv8.1 implementations.
This feature is supported in AArch64 and AArch32 states.
The ID_AA64MMFR1_EL1.PAN, ID_MMFR3_EL1.PAN, and ID_MMFR3.PAN fields
identify the support for ARMv8.1-PAN.

Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Change-Id: I94a76311711739dd2394c72944d88ba9321fd159
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19729
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Rewrite MSR immediate instruction class

MSR <pstatefield>, #imm is used for setting a PSTATE field using an
immediate. Current implementation has the following flaws:

* There is no base MSR immediate definition: all the existing
PSTATE fields have a different class definition
* Those implementation make use of a generic data64 base class
which results in a wrong disassembly (pstate register is printed as an
integer register).

This patch is fixing this by defining a new base class (MiscRegImmOp64)
and new related templates. In this way, we aim to ease addition of new
PSTATE fields (in ARMv8.x)

Change-Id: I71b630ff32abe1b105bbb3ab5781c6589b67d419
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19728
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix reg dependency for SVE gather microops

The first microop of an SVE gather creates a copy of the
source vecreg into AA64FpUreg0. The subsequent microops
must refer to this copy as a source in order to establish
the correct register dependencies.

Change-Id: I84d8c331f9f9ebca609948a15f686a7cde67dc31
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19172
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix tracing code for SVE gather

Printing the entire contents of the dest vecreg for each gather
microop is suboptimal as it creates false positive differences
between Atomic and O3 traces. This fix prints only the memory
data which a microop loads from memory.

Change-Id: Idd8e0b26a96f9c9cc0b69360174bedf6a9f6dcb5
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19171
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add SVE LD1RQ[BHWD]

Add both scalar+scalar and scalar+immediate versions.

Change-Id: If5fa1a71ab0dab93f9d35b544ea0899ece858bea
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19170
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix decoding for SVE memory instructions

Some SVE memory instructions are missing the makeSP function for
register operands that can be the SP register. This leads to
segmentation faults on the application side as the wrong register is
decoded.

Change-Id: Ic71abc845e0786a60d665231b5f7b024d2955f4b
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19169
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Add support for SVE load/store structures

Change-Id: I4d9cde18dfc3d478eacc156de6a4a9721eb9e2ff
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13524
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Implement ARMv8.1-HPD, Hierarchical permission disable

According to the armarm:
ARMv8.1-HPD introduces the facility to disable the hierarchical
attributes, APTable, PXNTable, and UXNTable, in the translation tables.
This disable has no effect on the NSTable bit. This feature is
mandatory in ARMv8.1 implementations.

This feature is added only to the VMSAv8-64 translation regimes. ARMv8.2
extends this to the AArch32 translation regimes, see ARMv8.2-AA32HPD.

The ID_AA64MMFR1_EL1.HPDS field identifies the support for ARMv8.1-HPD.

Change-Id: Ibbf589b82f2c1e4437b43252f8f633e8f6fb0b80
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19610
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add HPD bit for TCR_EL2/EL3

This is controlling Hierarchical Permissions for EL3 and for EL2 when
HCR_EL2.E2H = 0.

Change-Id: I9d6615ff4980cc56a28dc32088cf1524155f0fa4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19609
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Clean Fault generation when processing Long Descriptor

A new shared method has been introduced: generateLongDescFault

Change-Id: I7eb6fa1347a6c2cf9cb11fd9f2137d983c4f7a40
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19608
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add first-/non-faulting load instructions

First-/non-faulting loads are part of Arm SVE.

Change-Id: I93dfd6d1d74791653927e99098ddb651150a8ef7
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19177
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Use ExceptionLevel type in TlbEntry

Replacing uint8_t with ExceptionLevel type in the arm TlbEntry. The
variable is representing the translation regime it is targeting.

Change-Id: Ifcd6e86c5d73f752e8476a2b7fda9ea74a0c7a3b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19488
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, arm: Update miscRegs in getTE

Normally, a translation will start via translateTiming/functional
which will check if the miscRegs have been updated and if so,
will update the TLB state accordingly. However, in a 2 stage
system, if there is a hit in stage 1, the resulting IPA will be
sent to the S2-TLB for translation via a getTE() function call
(via the stage2_lookup object). This will cause the state of the
S2-TLB to be out of sync.

Change-Id: I117e4032fc76d7d31f4f999887b5573a7e5811e6
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/14995
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Move the memacc_code before op_wb in fp loads

This is trying to fix the bug that arises when a memory exception
is generated during a fp flavoured load (A memory load targeting
a SIMD & FP register).
With the previous template a fault was not stopping the register
value to be modified (wrong)

if (fault == NoFault) {
fault = readMemAtomic(xc, traceData, EA, Mem, memAccessFlags);
%(memacc_code)s;
}

if (fault == NoFault) {
%(op_wb)s;
}

The patch introduces a Load64FpExecute template which is moving the
register write (memacc_code) just before the op_wb

Change-Id: I1c89c525dfa7a4ef489abe0872cd7baacdd6ce3c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19228
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: implement VMINNM scalar thumb

VMINNM was implemented at Iabbbca2932557cf6c98ce36690c385c3ddf39ed8 but
the thumb scalar encoding was missing. This patch implements it.

Change-Id: Ia29ec77dbd82f6be6b3d040a0e737794f52c33bf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19108
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix WalkerState,Descriptors default constructor

Those POD strutures are not initializing all members at construction.
This could lead to undefined behaviour

Change-Id: Iaa8afb126382b6bfbef686883a026262f24d5ca1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Javier Setoain <javier.setoain@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19149
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Fix decoding of CRC32 instructions in thumb32

The CRC32 and CRC32C instructions are incorrectly decoded in thumb32
mode according to the latest manual:
https://developer.arm.com/docs/ddi0597/latest/top-level-encodings-for-t32/16-bit#dpint_2r

Change-Id: I9c6684f1ec7fe14d3b4cdf13f117a9819e046578
Signed-off-by: Chun-Chen TK Hsu
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19028
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Treat SVE prefetch instructions as no-ops

Change-Id: Ife0424e274dd65d6dc4f6e5cc5e37d17b03be0d8
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13522
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add initial support for SVE gather/scatter loads/stores

Change-Id: I891623015b47a39f61ed616f8896f32a7134c8e2
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13521
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, base, cpu, gpu, sim: Merge getMemProxy and getVirtProxy.

These two functions were performing the same function but had two
different names for historical reasons. This change merges them
together, keeping the getVirtProxy name to be consistent with the
getPhysProxy method used to get a non-translating proxy port.

Change-Id: Idd83c6b899f9343795075b030ccbc723a79e52a4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18581
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, base, sim: Demote (SE|FS)TranslatingPortProxy &s to PortProxy &s.

Al(most) all of the interesting differences between the two classes
have been removed. There are some control methods which are still
specific to each type which may require treating them as their true
type, but most code that consumes them doesn't need to worry about
which is which.

Change-Id: Ie592676f1e496c7940605b66e55cd7fae18e59d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18577
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, base, sim: Replace Copy(String)?(In|Out) with equivalent code.

This expands those functions into code which extracts the virt proxy
and then uses the appropriate method on it. This has two benefits.
First, the Copy* functions where mostly redundant wrappers around the
methods the proxy port already had. Second, using them forced a
particular port which might not actually be what the user wanted.

Change-Id: I62084631dd080061e3c74997125164f40da2d77c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18575
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: add a release parameter to Process.py

Set the default release to that single value for all ISAs.

glibc has checks for the kernel version based on uname, and refuses
to start any syscall emulation programs if those checks don't pass with
error:

FATAL: kernel too old

The ideal solution to this problem is to actually implement all missing
system calls for the required kernel version and bumping the release
accordingly.

However, it is very hard to implement all missing syscalls and verify
compliance.

Previously, we have simply bumped the version manually from time to
time when major glibc versions started breaking.

This commit alleviates the problem in two ways.

Firstly, having a single kernel version for all versions means that it is
easier to bump all versions at once.

Secondly, it makes it is possible to set the release with a parameter,
which in turn can be set from the command line with:

se.py --param 'system.cpu[:].workload[:].release = "4.18.0"'

Change-Id: I9e3c31073bfe68735f7b0775c8e299aa62b98222
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17849
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, base, dev, sim: Remove now unnecessary casts from PortProxy methods.

Change-Id: Ia73b2d86a10d02fa09c924a4571477bb5f200eb7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18572
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm, mem: Move the SecurePortProxy subclass into it's own file.

The idea of a "secure" memory area/access is specific to ARM and
shouldn't be in the common mem directory, although it's built in to the
generic memory protocol at this point.

Regardless, it should minimially be in its own file like the virtual
and physical port proxy classes are.

Change-Id: I140d4566ee2deded784adb04bcf6f11755a85c0c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18569
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix fallthrough when trapping at EL2

This had been caused by the introduction of GICv3 registers trapping in
commit 32a23114c14cebc5ec0067ac739144b50e412219

Change-Id: I5073e2891f3ff5c5a9e05d3456dad6f4f8ffba0d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18909
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Trap virtual accesses to GICv3 SGI registers

According to GICv3 documentation, a virtual write (which means
HCR.IMO/FMO = 1) to ICC_SGI0R_EL1, ICC_SGI1R_EL1, ICC_ASGI1R_EL1 should
trap to EL2.

Change-Id: Ie7a952c2ff08590bb0c6e3854df567d714c2dc94
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17990
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Expose haveGicv3CPUInterface to the ISA interface

Change-Id: I36232b7618ad875983f34b741c51f12ddb9ae166
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17989
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Change mcrMrc15TrapToHyp signature

This patch is moving MiscRegs reading inside the mcrMrc15TrapToHyp
helper function. Rather than passing registers as arguments,
we are just passing a ThreadContext pointer

Change-Id: I6636dd3a4f92f757479d8a8d2c47de050a0b9eae
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17988
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: change syscall function signature

The system calls had four parameters. One of the parameters
is ThreadContext and another is Process. The ThreadContext
holds the value of the current process so the Process parameter
is redundant since the system call functions already have
indirect access.

With the old API, it is possible to call into the functions with
the wrong supplied Process which could end up being a confusing
error.

This patch removes the redundancy by forcing access through the
ThreadContext field within each system call.

Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Add an object file loader for linux and freebsd.

Change-Id: Ie5fd187a4897aa608ffc12278b23d3ee8c0f323c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18585
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: implement VMINNM and VMAXNM scalar version

ARMv8.2 16-bit versions have not yet been implemented, but a placeholders
were created for them.

Refactor the nearby decoding tree to closely match the ARM spec A32 decode
table.

That piece of the tree can also be called from thumb which decodes it in
the same way, although the thumb decode table has a different terminology

The old code didn't match neither A32 or T32 terminologies, so it is
better to at least match one of them to help verify correctness.

Change-Id: Iabbbca2932557cf6c98ce36690c385c3ddf39ed8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18690
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: implement VMINNM and VMAXNM SIMD version

This instruction is backported from aarch64.

In order to use the existing fplibMinNum backend, we first move
VMIN and VPMIN to use fplib. Adding VMINNM is then trivial.

Change-Id: I404daabeb6079f60e51a648a06d5b3e54f1c24a9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18689
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: rename operands to match spec in isa/formats/fp.isa

Matches ARM DDI 0487D.a decoding tables.

Change-Id: I48338ef956a04308d55d1022229ebe0962a8fe5d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18688
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Do not check MustBeOne flag for TLB requests from the prefetcher

Allow TLB requests generated from prefetchers to override the
MustBeOne arch flag. This allows the prefetchers to issue requests
without having to know architecutre-specific flags.

Change-Id: Id83e0c93f3d1a614da11c4f344ab4dc594423672
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18768
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add initial support for SVE contiguous loads/stores

Thanks to Pau Cabre and Adria Armejach Sanosa for their contribution
of bugfixes.

Change-Id: If8983cf85d95cddb187c90967a94ddfe2414bc46
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13519
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch: Stop using TheISA within the ISAs.

We know for sure what the ISA is, so there's no need for the
indirection.

Change-Id: I73ff04c50890d40a4c7f40caeee746b68b846cb3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18488
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Faults DebugFlag now printing inst opcode if available

This makes it easier to debug unimplemented instructions.

Change-Id: Iaaa288037326722f07251299fd68eacb2e295376
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18396
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Report real instruction encoding when Undefined

When dumping the opcode that caused an Undefined Instruction, we just
want to dump the real instruction encoding, and not the extended version
with metabits (like thumb, bigThumb etc). This was not appening when
panicking in SE mode.

The patch is also replacing custom masking in the Unknown(64) disassembler
in favour of ArmStaticInstruction::encoding() helper.

Change-Id: I9eb6fd145d02b4b07bb51f0bd89ca014d6d5a6de
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18395
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, sim: Simplify the AuxVector type.

The AuxVector type has a bunch of accessors which just give access to
the underlying variables through references. We might as well just make
those members accessible directly.

Also, the AuxVector doesn't need to handle endianness flips itself. We
can tell the byteswap mechanism how to flip an AuxVector, and let it
handle that for us.

This gets rid of the entire .cc file which was complicated by trying
to both hide the ISA specific endianness translations, and instantiate
templated functions in a .cc.

Change-Id: I433cd61e73e0b067b6d628fba31be4a4ec1c4cf0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18373
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Remove the ISA specialized versions of port proxy's read/write.

These selected their behavior based on ifdefs and had to be disabled
when on the NULL ISA. The versions which take an explicit endianness
have been renamed to just read/write instead of readGtoH and writeHtoG
since the direction of the translation is obvious from context.

Change-Id: I6cfbfda6c4481962d442d3370534e50532d41814
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18372
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Minimize the use of MemObject.

MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.

Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-arm: updateMiscReg not setting isHyp in aarch64

The isHyp flag should be set for a TLB::NormalTran when in EL2. This
was happening in aarch32 only, where the CPSR mode is checked, while
aarch64 was only using it for explicit EL2 translations, like for AT
instructions.

Change-Id: I54605811e9dde75b5cf8868190b0f4c2a8d46570
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18394
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Factor some repetition out of the ProcessInfo constructor.

Change-Id: I34f952d1097886704d37304478de125a915b2615
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18371
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm: Fix some style issues in stacktrace.cc.

De-indent the ArmISA namespace, and wrap some overly long lines.

Change-Id: Idc02b025bdfda483ddbd27d662e2314a5cbcb23c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18370
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Remove un-needed hyp flag in TLBI operations

The hyp flag was probably a legacy pre-v8 flag distinguishing
invalidation targeting PL2 translation regime (hyp mode).
Since the introduction of target_el parameter, hyp boolean is not needed
anymore. The patch works by setting the hyp flag in the flush* methods
in the TLB automatically by checking if target_el == EL2.

Change-Id: I798009e09ff24a383dea871e348188bae2685e8e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18389
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Correct target EL field in TLBI operations

Some TLB Invalidation operations affecting the EL2 translation regime
were marked as targeting EL1 instead of EL2

Change-Id: I77821eec7a409e9df6a6814855f9a375832ffe74
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jan-Peter Larsson <jan-peter.larsson@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18388
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Enable PMSELR_EL0 read in PMU

Change-Id: Ic1ec1d03464a7ce42295cee8a9f4ebcd3e90def1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17948
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Make GICv3 maintenance interrupt an ArmInterrupt

Change-Id: I88e2b72849cdf3f69026c62517303837e7d3d551
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17629
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Correct cast of template parameter

Clang with -Wconstant-conversion is _very_ restrictive on casting.
The shift operator results in an incorrect promotion.

This patch add a compile-time static cast that remove the error
when clang is used.

Change-Id: I3aa1e77da2565799feadc32317d5faa111b2de86
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17308
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix use of bitwise operators on booleans

Change-Id: I3762b2921f1d00a9104d8dc11a19dc0a219581e5
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17288
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix index generation for VecElem operands

Current operand generation is not providing VecElems with the right
vector index and element index.
The bug was covered when registers were 128 bit wide, but with SVE we
have augmented the vector register size and the bug has been exposed.

E.g. With dest = 2,

FpDestP2 = (vec_index = 0, elem_index = 4)

whereas it should be

FpDestP2 = (vec_index = 1, elem_index = 0)

Change-Id: Iad02fb477afd0d3dd3d437bf2ca4338fbd142107
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17710

arch-arm: Add missing fall-through defaults

Change-Id: Ie64b83d754c4719a77c7788879be71304a9b786e
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17289
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andrea Mondelli <Andrea.Mondelli@ucf.edu>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

sim-se: Fixed initialization array size

Doubled the size of the zeroed auxiliary vector since 2 * intSize on
aarch64 > sizeof(uint64).

Change-Id: I5196b000a696e9ea3f2b5daa5d5bb071794369aa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17088
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

dev-arm: ambiguous use of getPort()

The recent introduction of getPort() creates a conflict with
the existing method used in arm MMU.

This patch rename the old getPort() in getDMAPort() according
to the returned value (DmaPort class type)

Change-Id: Ief3d83650fd6b08490522341631244be06e380ce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17469
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, cpu, dev, gpu, mem, sim, python: start using getPort.

Replace the getMasterPort, getSlavePort, and getEthPort functions
with getPort, and remove extraneous mechanisms that are no longer
necessary.

Change-Id: Iab7e3c02d2f3a0cf33e7e824e18c28646b5bc318
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17040
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm,cpu: Add initial support for Arm SVE

This changeset adds initial support for the Arm Scalable Vector Extension
(SVE) by implementing:
- support for most data-processing instructions (no loads/stores yet);
- basic system-level support.

Additional authors:
- Javier Setoain <javier.setoain@arm.com>
- Gabor Dozsa <gabor.dozsa@arm.com>
- Giacomo Travaglini <giacomo.travaglini@arm.com>

Thanks to Pau Cabre for his contribution of bugfixes.

Change-Id: I1808b5ff55b401777eeb9b99c9a1129e0d527709
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/13515
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fixing implicit fallthrough build errors

2c242d6 introduced implicit-fallthrough errors when building against
ARM.

Added "default: return new Unknown(machInst);" to offending switch
statements; please verify this is the corret behavior

Signed-off-by: Ryan Gambord

Change-Id: I5f5e3661ec562d4a3b2699e07d1195e6877ff959
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17071
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

mem-cache: alias to mem::getMasterPort in TLB class

TLB:getMasterPort is used to obtain the PageWalkMasterPort if present and
hides the BaseTLB::getMasterPort().

The TLB::getMasterPort() is renamed according to the expected behavior.

Change-Id: If4f61189094a706d59805cd10f4f814e5830eda8
Reviewed-on: https://gem5-review.googlesource.com/c/16648
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: implement floating point aarch32 VCVTA family

These instructions round floating point to integer, and were added to
aarch32 as an extension to ARMv7.

Change-Id: I62d1705badc95a4e8954a5ad62b2b6bc9e4ffe00
Reviewed-on: https://gem5-review.googlesource.com/c/16788
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Move GICv3 detection at startup time

At the moment the haveGicV3 parameter is used only to signal its
presence when reading the MISCREG_ID_AA64PFR0_EL1 register. It depends
on the system->getGIC pointing to a GICv3 model. However this pointer
is set in the System only at init time (after construction), which means
that the haveGICv3CPUInterface will always be false.
This patch is fixing this by moving the parameter initialization at
startup time, together with the cpu interface registration.

Change-Id: I8da6711ea741ecd0f78ec8ca60a8c3ae3bca2421
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16483
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim-se: update the arm kernel version

This change is needed to run cpu tests with ARM binaries
compiled with newer linux kernel headers

Change-Id: I6cbf132c38d4b18f971ee32272ddb6a5a791a625
Signed-off-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/15855
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

python: Don't assume SimObjects live in the global namespace

The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.

Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Fix Virtual interrupts in AArch64

Checking if cpsr.mode is equal to MODE_HYP doesn't work for AArch64.
This is because AArch64 is using different modes when in EL2, like EL2T
and EL2H.
This made Virtual Interrupts to be triggered even when executing in EL2
(hypervisor) whereas they should interrupt the scheduled VM only
(Non-Secure EL0 and EL1). This patch is fixing this by using the generic
currEL() helper for getting the exception level, which is working for
both AArch32 and AArch64.

Change-Id: I08640050ef06261f280ba1e63ca9f32c805af845
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16202
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix extra comma in b7ce897f1e9545785bde982f72d04830c19d9a30

Change-Id: I649f8507ccb6c814b46b0b9b7e39dc912ecd9006
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16242

arch-arm: Allow ArmPPI usage for PMU

Differently from ArmSPIs, ArmPPI interrupts need to be instantiated by
giving a ThreadContext pointer in the ArmPPIGen::get() method. Since the
PMU is registering the ThreadContext only at ISA startup time, ArmPPI
generation in deferred until the PMU has a non NULL pointer.

Change-Id: I17daa6f0e355363b8778d707b440cab9f75aaea2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16204
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix initialization of PMU counters

A version of Linux kernel initializes counters before enabling them.
Without this change, gem5 overwrites the value of counter, which causes
incorrect counter values derived by kernel.

Change-Id: If0c515111103018d5f65f74434d7711a67aeaee4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16203
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, arch: Replace the CCReg type with RegVal.

Most architectures weren't using the CCReg type, and in x86 and arm
it was already a uint64_t.

Change-Id: I0b3d5e690e6b31db6f2627f449c89bde0f6750a6
Reviewed-on: https://gem5-review.googlesource.com/c/14515
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: cpu: Rename *FloatRegBits* to *FloatReg*.

Now that there's no plain FloatReg, there's no reason to distinguish
FloatRegBits with a special suffix since it's the only way to read or
write FP registers.

Change-Id: I3a60168c1d4302aed55223ea8e37b421f21efded
Reviewed-on: https://gem5-review.googlesource.com/c/14460
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch,cpu: Add vector predicate registers

Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.

Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm, configs: Create single instance of DTB autogeneration

This patch is rewriting the DTB autogeneration functions available in
fs_bigLITTLE.py and fs.py as a single method in the GenericArmSystem
so that other configuration scripts can make use of it.

Change-Id: I492bbf77e6b0ac5c5fbdbc75c0eecba29bd63bda
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15958
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Remove floatReg operand type

Change-Id: I87553257ce9c42d0e2514d5a1f010bc6e2e7f21e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15604
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Use VecElem instead of FloatReg for FP instruction

SIMD & FP Operations use FloatRegs in AArch32 mode and VecRegs in
AArch64 mode. The usage of two different register pools breaks
interprocessing between A32 and A64. This patch is changing definition
of arm operands so that they are backed by VecElems in A32, which are
mapped to the same storage as A64 VecRegs.

Change-Id: I54e2ea0ef1ae61d29aca57ab09acb589d82c1217
Reviewed-on: https://gem5-review.googlesource.com/c/15603
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, arch, arch-arm: Wire unused VecElem code in the O3 model

VecElem code had been introduced in order to simulate change of renaming
for vector registers. Most of the work is happening on the rename_map
switchRenameMode. Change of renaming can happen after a squash in the
pipeline.
This patch is also changing the interface to the ISA part so that
a PCState is used instead of ISA in order to check if rename mode
has changed.

Change-Id: I8af795d771b958e0a0d459abfeceff5f16b4b5d4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15601

arch-arm: Inital vector rename mode depending on A32/A64

Change-Id: I6b99833641b0ab6534471d5ff3ca5d3791285481
Reviewed-on: https://gem5-review.googlesource.com/c/15599
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Remove unused float operands

Removing FaP1 and FDest2 since they are not currently used by any ARM
instruction.

Change-Id: I4251dfcdd3f4434caaf0bdab507c1c3bd53fb5d2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15596
Reviewed-by: Ciro Santilli <ciro.santilli@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Implement LoadAcquire/StoreRelease in AArch32

This patch is implementing LoadAcquire/StoreRelease instructions in
AArch32, which were added in ARMv8-A only and where not present in
ARMv7.

Change-Id: I5e26459971d0b183a955cd7b0c9c7eaffef453be
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15817
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: IsStoreConditional flag set depending on flavor

This patch is aligning A32 with A64 where the IsStoreConditional flag
doesn't have to be specified manually in the instruction implementation,
but will be automatically added to any exclusive store.

Change-Id: Id02ed6fc2beeca6d125017393714a7c6eb3d8a33
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15816
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Remove SWP and SWPB instructions

The SWP and SWPB instructions have been removed from AArch32. It was
previously (ARMv7) possible to enable them with the ID_ISAR0.Swap bits,
which are now hardcoded to 0b0000 (SWP and SWPB not implemented)

Change-Id: Ic32b534454a7e0f7494a6f0b5e11182c65b3fe24
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15815
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Replace MiscReg with RegVal in utility.(hh|cc).

These uses snuck in after the previous pass which made this switch in
the rest of these files.

Change-Id: Ie891c6ec393a65f1c57c54301f0a2bb920d38bb0
Reviewed-on: https://gem5-review.googlesource.com/c/15795
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: cpu: Stop passing around misc registers by reference.

These values are all basic integers (specifically uint64_t now), and
so passing them by const & is actually less efficient since there's a
extra level of indirection and an extra value, and the same sized value
(a 64 bit pointer vs. a 64 bit int) is being passed around.

Change-Id: Ie9956b8dc4c225068ab1afaba233ec2b42b76da3
Reviewed-on: https://gem5-review.googlesource.com/c/13626
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm: Get rid of some register type definitions.

These are IntReg, FloatReg, FloatRegBits, and MiscReg. These have been
supplanted by the global types RegVal and FloatRegVal.

Change-Id: Ief1cd85d0eff7156282ddb1ce168a2a5677f7435
Reviewed-on: https://gem5-review.googlesource.com/c/13625
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: implement the GDB XML target description for ARM

The supported registers are essentially the same as before this patch,
but it is now trivial to make new registers visible in future commits.

Change-Id: Id15b7aeccca824c342e49a626d2877179474f3d4
Reviewed-on: https://gem5-review.googlesource.com/c/15138
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Move AArch32 IMPLEMENTATION DEFINED registers

Moving AArch32 instruction accessing IMPLEMENTATION DEFINED registers
from pseudo.[cc/hh] to misc.[cc/hh] in order to symmetrically match
with AArch64 implementation.

Change-Id: I27b0d65925d7965589b765269ae54129426e4c88
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15735
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim-se: add syscalls related to polling

Fix poll so that it will use the syscall retry capability
instead of causing a blocking call.

Add the accept and wait4 system calls.

Add polling to read to remove deadlocks that occur in the
event queue that are caused by blocking system calls.

Modify the write system call to return an error number in
case of error.

Change-Id: I0b4091a2e41e4187ebf69d63e0088f988f37d5da
Reviewed-on: https://gem5-review.googlesource.com/c/12115
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch: Make the ISA register types aliases for the global types.

The ISA specific types can thus be phased out.

Change-Id: I8ea531a099fad140a4ec9c91cd972fe044111d60
Reviewed-on: https://gem5-review.googlesource.com/c/13623
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm: Make the fp register types 64 bits.

This matches the other ISAs.

Change-Id: I84de91efde2529f4aecc7b26b84266d97459738c
Reviewed-on: https://gem5-review.googlesource.com/c/13622
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Read VMPIDR instead of MPIDR when EL2 is Enabled

Trying to read MPIDR(_EL1) from EL1, should return the value of
VMPIDR_EL2 if EL2 is enabled. This patch is modifying the utility
function for reading MPIDR in order to match this behaviour for both
AArch32 and AArch64.

Change-Id: I32c2d4d5052f509e6e0542a5314844164221c6a3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Added TLBI_ALL EL2 instruction

This patch is adding TLBI_ALLE2(IS) operations to the arm ISA.

Change-Id: I8e35cff9a2cc414f4c5fbbc5aa0cfe5023a3f011
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15616
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix usage of RegId constructor for VecElem

RegId() constructor requires three arguments in case of a VecElem
register: the class, the vector index and the element index inside the
vector, otherwise it panics.

Change-Id: Ic842df4dcddaffa83b211aa6e1dd1953cafa4951
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15615
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Stop using the FloatReg and FloatRegBits types.

This will let us make those types 64 bits to be in line with the other
architectures.

Change-Id: I5aef5199f4d2d5bb1558afedac5c6c92bf95c021
Reviewed-on: https://gem5-review.googlesource.com/c/13621
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

sim-se, arch-arm: Add support for getdents64

Change-Id: Ib27950144d4c9802ffb842db98aec9e433ccbfc5
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15438
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm, sim-se: Add support for TLS in clone

Change-Id: I1f78dce05a48a2e3adfaf027cd38ab55507b9611
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15437
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

arch-arm, sim-se: Fix incorrect SP handling in clone

The clone syscall is currently broken on aarch64 since the aarch64
code uses an incorrect SP register. Fix this by storing the new stack
pointer in SP_EL0 instead of R13.

Change-Id: Ie17990b4f359608e3b53e5bf625eca53769a6653
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15436
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

sim-se: Refactor clone to avoid most ifdefs

Some parts of clone are architecture dependent. In some cases, we are
able to use architecture-specific helper functions or register
aliases. However, there is still some architecture-specific that is
protected by ifdefs in the common clone implementation.

Move these architecture-specific bits to the architecture-specific OS
class instead to avoid these ifdefs and make the code a bit more
readable.

Change-Id: Ia0903d738d0ba890863bddfa77e3b717db7f45de
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15435
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

arch-arm, sim-se: Wire up syscalls needed for pthreads

Change-Id: I8da5e3e0d7dc5d31ac82ed2045109d6d73cbf99d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15415
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

dev-arm: Add a GICv3 model

Change-Id: Ib0067fc743f84ff7be9f12d2fc33ddf63736bdd1
Reviewed-on: https://gem5-review.googlesource.com/c/13436
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Additional bits in misc ARM registers to use with the TLB and page walker

Change-Id: I71a6360709b35ad788d8c88fba1a7a2761233dbd
Reviewed-on: https://gem5-review.googlesource.com/c/14555
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: properly handle RES0/1 for SCTLRs

They were being treated as RAZ/RAO, which is incorrect.
Put the access masks in the register metadatabase now that we have one.

Also fix this for HVBAR.

Change-Id: I097c847e35be2d59fb8235fc621bb061ef514cfb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/10401
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, cpu: Remove float type accessors.

Use the binary accessors instead.

Change-Id: Iff1877e92c79df02b3d13635391a8c2f025776a2
Reviewed-on: https://gem5-review.googlesource.com/c/14457
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-arm: Add Crypto in SE mode

This patch is also enabling AArch32 crypto instructions by setting the
ID_ISAR5 register accordingly.

Change-Id: Id412585b39b78570a65bd3047199c84e9db76cda
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15155
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: correctly set floats from GDB on aarch64

aarch64 floating point registers are now stored as vector type, but this
was not updated in the stub.

Change-Id: I4a2bc1cea0eec9beeb5bbd49e2a868b9d5ed0a42
Reviewed-on: https://gem5-review.googlesource.com/c/14498
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: only change the pc address when GDB registers are set

The entire pcState was being reset, which made the simulation incorrectly
switch to aarch32 from aarch64.

Change-Id: I9ba7dd0ed95bc6120d94393bba272e0cb8c081c5
Reviewed-on: https://gem5-review.googlesource.com/c/14496
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: fix the aarch64 GDB stub

The main change is to remove vector registers from the GDB stub.

Those registers were intended for SVE, which is a new architecture feature
and not yet treated by default on the GDB present in Ubuntu 18.04, and
possibly not even on GDB master.

As a result, aarch64 GDB stub connections would fail with:

Remote 'g' packet reply is too long

The correct way to support those registers is to send XML GDB target
description files to the client. This feature is not yet available for
any architecture, and should be implemented in future patches.

Other smaller fixes are:

* cpsr is uint32_t in aarch64 as well as arm
* use M5_ATTR_PACKED on the register structs since they are being cast and
sent as byte arrays

Change-Id: I77cd8a98e322ecc60799e5b11fe5cd414d893cc7
Reviewed-on: https://gem5-review.googlesource.com/c/14495
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Add missing template declaration

The lack of a template declaration for IllegalInstSetStateFault was
causing errors when compiling with clang.

Change-Id: If7f19d7e879330226c80df2baca73d88d818f673
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14618
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

cpu,arch-arm: Initialise data members

The value that is not initialized has a bogus value that manifests when
using some debug-flags what makes the usage of tracediff a bit more
challenging.

In addition, while debugging with other techniques, it introduces the
problem of understanding if the value of a field is 'intended' or just
an effect of the lack of initialisation.

Change-Id: Ied88caa77479c6f1d5166d80d1a1a057503cb106
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13125
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: clang compilation fixes

Fix 1: std::pair constructor is not a constexpr in clang implementation
Fix 2: static const templates need to be defined in their
translation unit

Change-Id: I3d9b9b47e1d148e44555f40e2e2aeff06707ff8f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14617
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch, base, cpu, gpu, mem: Replace assert(0 or false with panic.

Neither assert(0) nor assert(false) give any hint as to why control
getting to them is bad, and their more descriptive versions,
assert(0 && "description") and assert(false && "description"), jury
rig assert to add an error message when the utility function panic()
already does that directly with better formatting options.

This change replaces that flavor of call to assert with panic, except
in the actual code which processes the formatting that panic uses (to
avoid infinitely recurring error handling), and in some *.sm files
since I don't know what rules those have to follow and don't want to
accidentaly break them.

Change-Id: I8addfbfaf77eaed94ec8191f2ae4efb477cefdd0
Reviewed-on: https://gem5-review.googlesource.com/c/14636
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Print register name when warning on AT instructions

With this patch we don't print anymore the enum value when warning
on any AT instruction usage, but we print the sys reg name instead

Change-Id: Ic6831b98ad6b0582be69883dc9519a9d3324da30
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14316
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Deprecate usage of legacy bootloader patching

This patch is implicitly deprecating the usage of bootloader patching,
which is injecting instructions from gem5 into the bootloader
binary. This was probably meant to provide a dynamic bootloader
entry point.
This is not needed in ARMv8.0, since we can simply update the
ArmSystem::resetAddress with the bootloader entry point.

Change-Id: I0c469873b8d69f7b49a7383e0754468bc1f2bd72
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14001
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: ArmSystem::resetAddr64 renamed to be used in AArch32

ARMv8 differs from ARMv7 with the presence of RVBAR register, which
contains the implementation defined reset address when EL3 is not
implemented.
The entry 0x0 in the AArch32 vector table, once used for the Reset
Vector, is now marked as "Not used", stating that it is now IMPLEMENTATION
DEFINED. An implementation might still use this vector table entry to
hold the Reset vector, but having a Reset address != than the general
vector table (for any other exception) is allowed.

At the moment any Reset exception is still using 0 as a vector table
base address. This patch is extending the ArmSystem::resetAddr64 to
ArmSystem::resetAddr so that it can be used for initializing
MVBAR/RVBAR. In order to do so, we are providing a specialized behavior
for the Reset exception when evaluating the vector base address.

Change-Id: I051a730dc089e194db3b107bbed19251c661f87e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14000
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Implement AArch32 RVBAR

RVBAR has been added to the system register list since ARMv8.0-A. It is
implemented only if the highest Exception Level is different (minor)
than EL3. If that's not the case, MVBAR is used. Since the two
registers are mutually exclusive (depending on the presence of EL3),
they share the same coprocessor numbers:

p15, 0, c12, c0, 1

Rather than introducing a new register alias, we overload MVBAR so that
it is treated as RVBAR if ArmSystem::highestEL() < EL3. This patch is
changing the MiscReg info so that EL1 or EL2 access MVBAR (as RVBAR).

N.B MVBAR is RW, whereas RVBAR is RO

Change-Id: Ida3070413fd151ce79c446e99a2a389298d5f5bd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13999
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Remove SCTLR.VE bit

ARMv8 has removed SCTLR.VE bit which is now hardcoded to 0. We are
removing it from gem5 since we were not handling it anyway.

Change-Id: Ibde2db45c7f8add4a3188f2cb8c23701a6088d03
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13998
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Refactor ISA::clear by adding a ISA::clear32 method

The patch is also moving some initialization code to be used
by AArch64 as well since the registers are mapped to AArch64 ones.

Change-Id: I0089df25275434172c6e0e9cb125ee535c04d1b8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13997
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Remove MISCREG commented numbers

Having an enum number might be useful in case we wanted to know how many
miscregs we have, but on the other hand it makes it tedious to update
the register list, since every commented number must be bumped. This
patch is removing the comments holding the MISCREG numbers

Change-Id: Ic5aba93885e4b8d6cb3bd6a4c49900b9e5474276
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13996
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, arm: Return s1Req upon fault in s2Lookup

When a s2Lookup object is created, a new request is created, based
upon the original, stage 1 request sent out by the CPU. When a fault
occurs during the second stage of translation, this new request is
returned. This can lead to issues with the O3 CPU. The O3 fetch stage
will not acknowledge the fault as it is a different request than the
one it sent out and does not contain a contextID. This commit
rectifies this.

Change-Id: I21cb7377a59aed9d90d99f048b2106eaf219e93a
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13782
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, arm: Effect of AT instructions on descriptor handling

Some address translation instructions will stop translation after
the 1st stage and intercept the IPA, even in the presence of
stage 2 (eg AT S1E1). However, in the case of a TLB miss, the
table descriptors still need to be translated from IPA to PA to
avoid fetching the wrong addresses. This commit splits whether
IPA->PA translation is required for the VA and/or for the table
descriptors.

Change-Id: Ie53cdc00585f116150256f1d833460931b3bfb7d
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13781
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

syscall_emul: implement arm openat

This is especially important because the Ubuntu 18.04 packaged
arm-linux-gnueabihf-gcc uses the system call on the program initialization,
which leads all programs to fail with:

fatal: syscall openat (#322) unimplemented.

Change-Id: I5596162ad19644df7b6d21f2a46acc07030001ae
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13004
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: FIXUP for the add PRFM PST instruction commit

Change-Id: I898e5b565c6591f88ae732b24713aeae2c827cbd
Reviewed-on: https://gem5-review.googlesource.com/c/13815
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: We add PRFM PST instruction for arm

Note current PRFM supports only PLD, but PST (prefetch for store) is
also important for latency hiding. We also bug fix in disassembler to
display prfop correctly.

Change-Id: I9144e7233900aa2d555e1c1a6a2c2e41d837aa13
Signed-off-by: Yuetsu Kodama <yuetsu.kodama@riken.jp>
Reviewed-on: https://gem5-review.googlesource.com/c/13675
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: IMPDEF for SYS instruction with CRn = {11, 15}

According to the arm arm, a SYS instruction (op0 = 1) with CRn = (11 or
15) is implementation defined; this makes it trappable by having
HCR_EL2.TIDCP = 1.

Change-Id: Idd94ac345fee652ee6f8c0a7eb7b06ac75ec38ef
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13780
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: AArch64 Instruction for MISCREG_IMPDEF_UNIMPL

While there is a AArch32 class for instructions accessing implementation
defined registers, we are lacking for the AArch64 counterpart.
we were relying on FailUnimplemented, which is untrappable at EL2 (except
for HCR_EL2.TGE) since it is just raising Undefined Instruction.

Change-Id: I923cb914658ca958af031612cf005159707b0b4f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13779
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Refactor AArch64 MSR/MRS trapping

This patch refactors AArch64 MSR/MRS trapping, by moving the trapping
helpers in arch/arm/utility and in the isa code into a MiscRegOp64
class.

This class is the Base class for a generic AArch64 instruction which is
making use of system registers (MiscReg), like MSR,MRS,SYS. The common
denominator or those instruction is the chance that the system register
access is trapped to an upper Exception level. MiscRegOp64 is providing
that feature.

What do we gain? Other "pseudo" instructions, like access to
implementation defined registers can inherit from this class to make use
of the trapping functionalities even if there is no data movement
between GPRs and system register.

Change-Id: I0924354db100de04f1079a1ab43d4fd32039e08d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13778
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Trap to EL2 only if not in Secure State

MRS/MSR Instructions should trap to EL2 only if we are in non-Secure
state since at the current implementation (Armv8.0) there is no Secure
EL2.

Change-Id: I93af415fbcbd19a470752adf6afc92e520e9645d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13777
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix HVC trapping beahviour

This patch is fixing HVC trapping behaviour, reusing the pseudocode
implementation provided in the arm arm.

Change-Id: I0bc81478400b99d84534c1c8871f894722f547c5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13776
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: CPTR_EL3.TCPAC traps EL2 accesses to CPACR_EL1

According to the arm arm, CPTR_EL3.TCPAC traps EL2 accesses to the
CPTR_EL2 or HCPTR, and EL2 and EL1 accesses to the CPACR_EL1 or CPACR,
are trapped to EL3, unless they are trapped by CPTR_EL2.TCPAC.

Change-Id: I637be35b29db39f044dda0c6cc4fe986c9620371
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13775
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: treat aarch64 hints as NOPs instead of panic

Change-Id: Ida2a746e6188171bd2e4da92a4efb33fcbaa2b69
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13476
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: update hint instruction decoding to match ARMv8.5

This fixes:

- unallocated hints that have since been allocated
- unallocated and unimplemented hint instructions being treated as
Unknown instead of the correct NOP
- missing encoding for DBG on A32

Unallocated and unimplemented hints give a warning if executed.

The most important fix was for the CSDB Spectre mitigation
instruction, which was added recently and previously unallocated and
treated as Unknown.

The Linux kernel v4.18 ARMv7 uses CSDB it and boot would
fail with "undefined instruction" since Linux commit
1d4238c56f9816ce0f9c8dbe42d7f2ad81cb6613

Change-Id: I283da3f08a9af4148edc6fb3ca2930cbb97126b8
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13475
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch: Get rid of the unused type AnyReg.

This type is defined for all the ISAs but isn't used by anything.

Change-Id: I659a0c5abc7883d82fedd1cac2cd103612d315c8
Reviewed-on: https://gem5-review.googlesource.com/c/13539
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

syscall_emul: update arm uname release to 3.7.0+

Trying to compile an ARM C hello world with arm-linux-gnueabihf-gcc from
Ubuntu 16.04 leads to a runtime failure with se.py:

FATAL: kernel too old

because the glibc tests if the kernel is at least 3.2.0, and gem5 was
reporting 3.0.0.

Furthermore, it is hard to obtain such toolchain at all: for example
crosstool-NG currently only allows for minimum kernels above 3.2.0.

3.7.0+ was chosen to match the aarch64 value, as it is likely that the
level of support will be very similar.

This commit does not guarantee that full 3.7.0 is supported, but it is
not likely that we had full 3.0.0 support previously either.

However, it is more likely that such support will be eventually achieved
if users can at least try out their programs and implement the missing
system calls as they are found.

Change-Id: I8df3763ae49788a6cb11cb0920e8202cd56b0f09
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12986
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add have_crypto System parameter

This patch adds the have_crypto ArmSystem parameter for enabling crypto
extension. This is done by modifying the AArch32/AArch64 ID registers
at startup time.

Change-Id: I6eefb7e6f6354802a14ea639ad53b75f8e1e11c5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13252
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-arm: AArch64 Crypto AES

This patch implements the AArch64 AES instructions
from the Crypto extension.

Change-Id: I9143041ec7e1c6a50dcad3f72d7d1b55d6f2d402
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13250
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: AArch64 Crypto SHA

This patch implements the AArch64 secure hashing instructions
from the Crypto extension.

Change-Id: I2cdfa81b994637c880f2523fe37cdc6596d05cb1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13249
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: AArch32 Crypto AES

This patch implements the AArch32 AES instructions
from the Crypto extension.

Change-Id: I51e6deda748b0c26135bcfe9d0c7128f3af91f3d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Matt Horsnell <matt.horsnell@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13248
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: AArch32 Crypto SHA

This patch implements the AArch32 secure hashing instructions
from the Crypto extension.

Change-Id: Iaba8424ab71800228a9aff039d93f5c35ee7d8e5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13247
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: remove the RealViewEB platform

This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.

Furthermore, trying to use it fails with:

object 'RealViewEB' has no attribute 'pci_host'

and the last commit in the class happened two years ago, which indicates
that no one has been using it.

Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Mark ArmProcess method as override

Allows compilation on clang3.5+ by fixing Winconsistent-missing-override

Change-Id: Ic0ebf3869fc2d9a29fcf7cf5a6535952f41714d0
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13227
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim-se: Set ArmProcess64 hwcaps depending on ID regs

ArmProcess64 needs to query AArch64 ID registers to check which hw
capability is going to report in the appropriate aux vector's entry.

Change-Id: I1e1294b831e902226f9b162f25e841e53b940454
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13164
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

sim-se: Different HWCAP for ArmProcess32/64

AArch32 and AArch64 have different HWCAP flags in Linux, but we are
currently using AArch32 HWCAP flags to initialize the aux vector of both
AArch32 and AArch64 binaries.

This patch also fixes a bug that was introduced by running in SE mode a
target binary compiled with glibc > 2.18. Using AArch32 flags
resulted on CPUID flag being set for AArch64. This incorrectly tells
libc that emulation of the midr_el1 is supported.
In FullSystem this might work, but since we are in Syscall Emulation
there is no OS behind emulating the mrs midr_el1 instruction.

By separating AArch32 flags from AArch64 flags we are turning off the
CPUID hwcap flag in SE mode.

Change-Id: I9f651957ba9d19dc2bc06606de070c6586f0f9fa
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12884
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

arch-arm: Add FP16 support introduced by Armv8.2-A

This changeset adds support for FP/SIMD instructions with
half-precision floating-point operands.

Change-Id: I4957f111c9c5e5d6a3747fe9d169d394d642fee8
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13084
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add FP16 support and other primitives to fplib

This changeset:
- extends fplib to support emulation of half-precision floating-point
(FP16) operations;
- extends fplib to support additional primitives introduced by the Arm
Scalable Vector Extension (SVE) (fplibExpa, fplibScale,
fplibTrigMAdd, fplibTrigSMul, fplibTrigSSel);
- adds the FZ16 bit to FPSCR;
- cleans up fplib code by replacing constants with preprocessor macros
and by adding inline functions to recognise NaNs and infinities.

Change-Id: If8fdb2a5824b478c8310bbc126ec60cc1105f135
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13044
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Implement AArch64 ID regs as bitunions

This patch is implementing the following AArch64 ID registers as
bitunions, so that it is easier to query for feature availability:

- ID_AA64DFR0_EL1
- ID_AA64ISAR0_EL1
- ID_AA64ISAR1_EL1
- ID_AA64MMFR1_EL1
- ID_AA64MMFR2_EL1
- ID_AA64PFR0_EL1

They are updated to the latest Armv8.5 arch release version.
RES0 only ID registers like ID_AA64AFR1_EL1 haven't been added.

Change-Id: Ied037abe3757421bcfc2834d397a8cf9a2b9f0a7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13067
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Implement AArch64 ID_AA64MMFR2_EL1 register

This patch implements AArch64 Memory Model Feature Register 2
(from ARMv8.2)

Change-Id: I16d9acaf620fac6d1206e208bd143daec1657daf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13066
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Move MiscReg BitUnions into a separate header file

As the number of MiscRegs increases there is the need of a cleaner
header file; this patch is separating miscreg.[cc,hh] where the miscreg
decoding/utility functions are defined/declared from the MiscReg
register types (BitUnion).

Change-Id: I815f53b117b50e47f93aa13d78356ef09d2a2541
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13065
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Init AArch64 ID registers in SE mode

One of the auxv vector's flag is the HWCAP, whose bits match the content
of several arm ID registers. This patch factors out AArch64 ID
registers init into a separate method and creates the symmetric AArch32
ID register init as well, so that we get a meaningful auxiliary vector
in SE mode.

Change-Id: I52bdb31b67508c4447558ebd7ca743733a69280e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/13064
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: raise/clear IRQ when writing to PMOVSCLR/SET

Writing a 1 to the Overflow Flag Status register should trigger an
interrupt raise/clear depending on the register we are currently using
(PMOVSCLR for clearing and PMOVSSET for raising).

Change-Id: I2091456685a245712045cf7a4932ac36b7dded1d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12531
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

syscall_emul: expand AuxVector class

The AuxVector class is responsible for holding Process data.
The data that it holds is normally setup by an OS kernel in
the process address space. The purpose behind doing this is
to pass in information that the process will need for various
reasons. (Check out the enum in the header file for an idea of
what the AuxVector holds.)

The AuxVector struct was changed into a class and encapsulation
methods were added to protect access to the member variables.

The host ISA may have a different endianness than the simulated
ISA. Since data is passed between the process address space and
the simulator for auxiliary vectors, we need to worry about
maintaining endianness for the right context.

Change-Id: I32c5ac4b679559886e1efeb4b5483b92dfc94af9
Reviewed-on: https://gem5-review.googlesource.com/12109
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

Fix SConstruct for asan build

Sometimes it's easier to debug gem5 built with ASan enabled. This CL fixes
some build error when using --with-asan.

Bug: None
Test: ./scripts/build_gem5 --with-asan --with-ubsan build/ARM/gem5.debug

Change-Id: Iaaaaebc3f25749e11f97bf454ddd0153b3de56e7
Reviewed-on: https://gem5-review.googlesource.com/12511
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch-arm: Correction for address size in EL1&0 translation

When doing EL0/1 translation in stage2, the
physical address size will be defined by the
hypervisor (via VTCR_EL2.ps, not TCR.ips).

See D10.2.121 of the ARM ARM.

Change-Id: Ic7df97c0f5950a648f7408cde3955a640b562c1d
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12552
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Correction to address size in EL2/EL3

This commit corrects how the address size is
determined in EL2/EL3. Previously, TCR_ELx.ips
was used but this should be TCR_ELx.ps.

Change-Id: I7e5a2f376335532a1d1c8c74d12a416617474ae2
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12551
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev-arm: rename Pl390 to GicV2

The Pl390 model has evolved and acquired a lot of the features from GICv2,
which means that the name is no longer appropriate. Rename it to GICv2
since this is more representative of the supported features.

GICv2 is backwards compatible with the older Pl390, so we decided to
simply rename the class to represent both GICv2 and older interfaces such
as the instead of creating a new separate one.

Change-Id: I1c05fba8b3cb5841c66480e9f05b8c873eba3229
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12492
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Factory SimObject for generating ArmInterruptPin

With this patch the python ArmInterruptPin SimObject matches to the
C++ ArmInterruptPinGen. The latter is in charge of generating
the ArmInterruptPin (which is not a SimObject anymore).
This is meant to ease the generation of ArmInterruptPins: by
not being SimObjects we are not forced to instantiate them
in the configuration script; we can generate them dynamically
instead throughout simulation.

Change-Id: I917d73a26168447221f5993c8ae975ee3771e3bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12401
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Use the interrupt adaptor in the PMU

Rewrite interrupt handling in the PMU model to use the new interrupt
adaptor.

Change-Id: I2cbb99580c46d3e21a1335b897843b7b6e41f10c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12400
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

arm: Add support for tracking TCs in ISA devices

ISA devices typically need to keep track of the thread context they
are associated with. Among other things, this is required for
interrupt delivery. Add a BaseISADevice:setThreadContext() method to
wire such models to the right thread context.

Change-Id: Iad354d176c0c4c4e34c6ab8b5acaee0b69da0406
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12399
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

arm: Add support for RCpc load-acquire instructions (ARMv8.3)

Please note that at the moment these instructions behave like the
existing load-acquire instructions, which follow the more conservative
RCsc consistency model. This means that the new instructions are
_functionally_ correct, but the potential performance improvements
enabled by the RCpc model will not be experienced in timing
simulations.

Change-Id: I04c786ad2941072bf28feba7d2ec6e142c8b74cb
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11989
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Don't fail to initialise PMU if BP is missing

The branch predictor currently assumes that each CPU has a branch
predictor. This isn't true in some cases (e.g., KVM, Atomic).

Change-Id: I61e80dca940c2dadba1b812449691c9dba1c06d9
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11520
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Introduce ARMv8.1 Virtual Timer System Registers

Adding CNTHV_CTL_EL2, CNTHV_CVAL_EL2, CNTHV_TVAL_EL2 System Registers
into the decode tree. They are currently implemented as a generic timer
and produces a warning if accessed.

Change-Id: I1a23035d67f95eeac49d890283e9a0d58426d504
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11592
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Introduce RAS System Registers

Adding RAS Extension System Registers into the decode tree. They are
currently unimplemented and produce a warning (not failure) if accessed.

Change-Id: I4baeded822c9582a2cb9d5277409b029eb00a962
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11591
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix incorrect t{0,1}sz field in TTBCR

The t0sz and t1sz fields in TTBCR only are only three bits wide unlike
aarch64 which has a 6-bit wide field. The higher bits of the
aarch64-equivalent should be treated as RES0.

Change-Id: I60df73105c34500c0348a44a491c117e9b28f18f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11589
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: AArch32 execution triggering AArch64 SW Break

AArch32 Software Breakpoint (BKPT) can trigger an AArch64 fault when
interprocessing if the trapping conditions are met.

Change-Id: I485852ed19429f9cd928a6447a95eb6f471f189c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11197
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: BadMode checking if corresponding EL is implemented

The old utility function called badMode was only checking if the mode
passed as an argument was a recognized mode. It was not checking if the
corresponding mode/EL was implemented. That function has been renamed to
unknownMode and a new badMode has been introduced. This is used by the
cpsrWriteByInstruction function. In this way any try to change the
execution mode won't succeed if the mode hasn't been implemented.

Change-Id: Ibfe385c5465b904acc0d2eb9647710891d72c9df
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11196
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Adapting IllegalExecution fault for AArch32

The Illegal Execution fault triggered by the setting of processor state
PSTATE.IL happens in AArch32 as well and takes the form of UNDEFINED
exception fault. We are hence copying the UndefinedInstruction AArch32
fields into the IllegalInstSetStateFault.

Change-Id: Ibb7424397c2030ea5d010577c530277a27036aea
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10814
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add Illegal Execution flag to PCState

This patch moves the detection of the Illegal Execution flag (PSTATE.IL)
from the tlb translation stage (fetch) to the decoding stage. This is
done by adding the illegalExecution field to the PCState.

Change-Id: I9c1c4e9c6bd5ded905c1d56b3034e4e9322582fa
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10813
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Read APSR in User Mode

This patch substitutes reads to the CPSR in user mode (MRS CPSR) to
reads to APSR (Application Program Status Register).
This is the user level alias for the CPSR. The APSR is a subset of the
CPSR.

Change-Id: I18a70693aef6fd305a4c4cb3c6f81f331bc60a2d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10602
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix missing Request allocation

This patch is fixing a missing allocation for a Request buffer
in the Stage2Translation class.

Change-Id: I9ce7b85d3527c5b3cc895eb83e9a39641793b0bd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11095
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Using smart pointers for memory Requests

This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.

Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

misc: Substitute pointer to Request with aliased RequestPtr

Every usage of Request* in the code has been replaced with the
RequestPtr alias. This is a preparing patch for when RequestPtr will be
the typdefed to a smart pointer to Request rather then a raw pointer to
Request.

Change-Id: I73cbaf2d96ea9313a590cdc731a25662950cd51a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10995
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch-arm: Remove dead doingStage2 variable in PT walker

Change-Id: Iab5ecec56120c725847b2e462fd4793cfac87d3c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10815

arch-arm: Perform stage 2 lookups using the EL2 state

Change-Id: Ic56b694f22a26e9c208a10e5703d4b5b0900070f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10507
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Respect EL from translation type

There are cases where instructions request translations in the context
of a lower EL. This is currently not respected in the TLB and the page
table walker. Fix that.

Change-Id: Icd59657a1ecfd8bd75a001bb1a4e41a6f4808a36
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10506
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Fix page size handling when merging stage 1 and 2

The current code to merge translation entries from stage 1 and stage 2
doesn't handle cases where the page sizes at the different stages
differ. This change fixes both the case when the hypervisor has a
larger page size and when it has a smaller page size.

Change-Id: Icdf289005bf1e4de4d91d54643924a38d9d77796
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10505
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

dev, arm: Add support for HYP & secure timers

Change-Id: I1a4849283f9bd5b1856e1378f7cefc33fc14eebd
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10023
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Adjust breakpoint EC depending on source state

The software breakpoint exception class needs to be adjusted depending
on the source EL's execution state. This change fixes an incorrect
exception class when taking a breakpoint from aarch64.

Change-Id: I99d87a04be6bf9ce3a69f6b19969fa006cfd63a4
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10809
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: ISA param for treating MISCREG_IMPDEF_UNIMPL as NOP

In the Arm ISA there are some sys reg numbers which are reserved for
implementation defined registers. The default behaviour is to to treat
them as unimplemented registers. It is now possible to change this
behaviour at runtime and treat them as NOP. In this way an access to
those register won't make simulation fail.

Change-Id: I0d108299a6d5aa81fcdabdaef04eafe46df92343
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10504
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Remove unusued MISCREG_A64_UNIMPL

In case the decoder fails to find a suitable MiscReg during a MSR/MRS
in AArch64, MISCREG_UNKNOWN is used, so there is no need for an extra
MISCREG_A64_UNIMPL register.

Change-Id: I7c709fc554e554b39d765dffb7ceb90e33b7c15f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10503
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: MPIDR.MT = 1 in a multithreaded system

MPIDR.MT Indicates whether the lowest level of affinity consists of
logical PEs that are implemented using a multithreading type approach

Change-Id: Ia5e6e65577729c7826227c4574ce690f76454edc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10502
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: S3_<op1>_<Cn>_<Cm>_<op2> are Implementation defined

In the AArch64 ISA, S3_<op1>_<Cn>_<Cm>_<op2> refers to a pool
of implementation defined registers, provided that reg numbers
are in the following range:

<op1> is in the range 0 - 7
<CRn> can take the values 11, 15
<CRm> is in the range 0 - 15
<op2> is in the range 0 - 7

Change-Id: I7edd013e5cea4887f5e4c5a81f4835b7de93bd50
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10501
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Implement ARMv8.1 TTBR1_EL2 register

This patch implements the ARMv8.1 TTBR1_EL2 register, which is used for
getting the translation table base address when a Host Operating System
is running at EL2. (HCR_EL2.E2H = 1)

Change-Id: Ic0ab351cae3fd64855eda7c18c8757da0d7b8663
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10382
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add E2H bit to HCR_EL2 System register

This patch adds the EL2 Host bit to the HCR_EL2 register. Enables a
configuration where a Host Operating System is running in EL2, and the
Host Operating System's applications are running in EL0.

Change-Id: I92d21ed9f8958c58f135dca1b6a97460ba4c02f9
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10381
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix semihosting arg count for SYS_GET_CMDLINE

SYS_GET_CMDLINE was declared as having 1 parameter when it is really
supposed to have two parameters.

Change-Id: Ia364abb4b34834f4d5e598b5adee9585e0815ac8
Reported-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10022
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Add support for semihosting STDIO redirection

The Arm Semihosting layer currently assumes that the guest application
shares STDIO with gem5. This makes it hard to distinguish application
output from gem5's output and makes it impossible to redirect STDIN
when running in interactive mode. Add support for custom STDIO
redirection when instantiating the Semihosting model.

Change-Id: I3411a6b9bfb008ffc3087d8837f59be72bd1e8ae
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10021
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Map ID_x_EL1 registers to AArch32 version

AArch64 ID_x_EL1 registers map to AArch32 ID_x counterparts. Those
registers must be initialized even when the highest Exception Level is
using AArch64.

Change-Id: Iccc9b6f631f5fac288116eb1ef2ad1d30c03de7b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10361
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim,cpu,mem,arch: Introduced MasterInfo data structure

With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.

Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch-arm: Add ARMv8.1 TTBR1_EL2 register

This patch adds ARMv8.1 TTBR1_EL2 register into the decodeAArch64SysReg
table, but stil leaving it unimplemented (Accessing it through MSR/MRS
causes an exception)

Change-Id: I463b86cc544233aa1ee5b2fcba689d6b9f2a874b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10063
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix Unknown Instruction disassemble

Do not print the entire ExtMachInst when disassembling an Unknown
Instruction.

Change-Id: Icd5908ec0fa430090165b2426372bdeb43c2a155
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10062
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Change disassemble when MSR to UNKNOWN register

This patch changes the fault being thrown when MSR/MRS to an unknown
Misc register in AArch64. While previously the instruction was decoded
as an Unknown instruction (hence not printing any information), it is
now decoded as a FailUnimplemented and the unrecognized System register
numbers (CRn, op0...) are printed.

Change-Id: I205ff7adcde5934231c77e8d2250db69a34581fc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10061
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix masking in CPACR_EL1

Some bits in CPACR_EL1 are RES0 but not RAZ/WI. For instance, bit
CPACR_EL1[31] is RES0 but should be made stateful, since it allows
programing of CPACR.ASEDIS. Therefore the masking of CPACR_EL1
is removed.

Change-Id: If1fa3fa1e06bc38495b8afce2c635f3ddf76ce32
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10046
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Mask out unsupported trapped exception handling bits

Floating-point trapped exception handlings are not currently
supported in gem5, therefore the corresponding bits are RAZ/WI in
FCPR.

Change-Id: Ica43af62d5f3bbc095e8dd872f0bd365231a5b5f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10045
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix FPEXC32_EL2 to FPEXC mapping

The mapping between MISCREG_FPEXC32_EL2 and MISCREG_FPEXC was
missing, this patch adds the mapping.

Change-Id: I2e7fa0456b73662ff9f950deb5c7e648a1bdd9ca
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10043
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Adding MiscReg Priv (EL1) global flag

This patch introduces a single global flag for setting RW access
permission at EL1 level, in either secure and non-secure mode.

Change-Id: I35df66a73349044ca996b5c04c5a2476f3a7abdf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10042
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Correct masking of cp10 and cp11 in CPACR

This patch fixes the masking of cp10 and cp11 in CPACR according to
NSACR.cp10 / NSACR.cp11 by adding the condition "in Non-secure state,
if EL3 is implemented and is using AArch32...", which is specified in
ARM ARM.

Change-Id: Id00e7bf04d6a985e27dbf1028677da0746b79924
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10044
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Using explicit invalidation in TLB

When setting TLB related MiscRegs, using explicit TLB regs invalidation
rather than implicit switch-case fallthrough

Change-Id: Ia1a7358b6d54dda3811be1c5ce5d676f8c518c4d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10041
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix secure MiscReg access when EL3 is not AArch32

When EL3 is not implemented or it is running on AArch64, Secure banking
does not apply and there is only one flatten register version. In this
scenario gem5 is using the _NS (Non-secure) version as a default backing
storage location: secure mode software must be able to access the
non-secure register.

Change-Id: I5086e6228a5cba4d18c632543a2bcf80ffb069a8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9941
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix mrc,mcr to cop14 disassemble

This patch fixes the disassemble for AArch32 mcr/mrc p14 instructions.

Change-Id: If5d7c2d7c726f040ae20053bf1d70f4405b34d0e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9681
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add support for Tarmac trace generation

This patch introduces the TarmacTracer: an instruction tracer which
allows to dump a gem5 execution trace in Tarmac format [1]. The new
tracer is supporting either Tarmac and TarmacV8 format specifications.
Not every traceable information has been implemented:

Implemented Trace Type:
Instruction Trace
Register Trace
Processor Memory Access Trace

Unimplemented Trace Type:
Program Flow Trace
Event Trace
Memory Bus Trace

[1]: https://developer.arm.com/docs/dui0845/f/tarmac-trace-file-format

Change-Id: I8799d8e5852e868673f728971db3fe8c63961f5e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9382
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add support for Tarmac trace-based simulation

A new InstTracer (TarmacParser) has been implemented. This tracer is
parsing a pre-existing Tarmac trace file [1] while gem5 is running; it
is comparing execution data together with trace data and it is dumping
differences.
This allows to use Tarmac format as a glue between heterogeneous
simuators speaking the same Tarmac language.

Kudos to Giacomo Gabrielli for writing the original tracer.

[1]: https://developer.arm.com/docs/dui0845/f/tarmac-trace-file-format

Change-Id: I9b92204a149813166166adba4a7c61a248bdcac3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix AArch32 branch instructions disassemble

This patch adds the generateDisassembly method for BranchReg, BranchImm
and BranchRegReg Base classes used by AArch32 branch instructions.

Change-Id: I6de015cc213335556d5187df3d4fcd765876262c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9503
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix secure write of SCTLR when EL3 is AArch64

MiscRegisters are not banked between secure and non-secure mode if EL3
is not implemented or if EL3 is using AArch64 (highestELIs64). In this
scenario a unique register is used and it is mapped to the NS version
(see snsBankedIndex implementation), so that a secure world read/write
should access the non secure storage.

Change-Id: Ica4182e3cdf4021d2bd1db23e477ce2bbf055926
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9502
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Correct mcrr,mrrc disassemble

This patch is fixing AArch32 mcrr,mrrc instruction disassemble by
printing the correct source/destination registers

Change-Id: I3fcffa0349aeee466e7c60ba4d1244824fb65d91
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9501
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch: Fix all override related warnings.

Clang has started(?) reporting override related warnings, something gcc
apparently did before, but was disabled in the SConstruct. Rather than
disable the warnings in for clang as well, this change fixes the
warnings. A future change will re-enable the warnings for gcc.

Change-Id: I3cc79e45749b2ae0f9bebb1acadc56a3d3a942da
Reviewed-on: https://gem5-review.googlesource.com/9343
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch: Add a virtual asBytes function to the StaticInst class.

This function takes a pointer to a buffer and the current size of the
buffer as a pass by reference argument. If the size of the buffer is
sufficient, the function stores a binary representation of itself
(generally the ISA defined instruction encoding) in the buffer, and
sets the size argument to how much space it used. This could be used
by ISAs which have two instruction sizes (ARM and thumb, for example).
If the buffer size isn't sufficient, then the size parameter should be
set to what size is required, and then the function should return
without modifying the buffer.

The buffer itself should be aligned to the same standard as memory
returned by new, specifically "The pointer returned shall be suitably
aligned so that it can be converted to a pointer of any complete object
type and then used to access the object or array in the storage
allocated...". This will avoid having to memcpy buffers to avoid
unaligned accesses.

To standardize the representation of the data, it should be stored in
the buffer as little endian. Since most hosts (including ARM and x86
hosts) will be little endian, this will almost always be a no-op.

Change-Id: I2f31aa0b4f9c0126b44f47a881c2901243279bd6
Reviewed-on: https://gem5-review.googlesource.com/7562
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-arm: Distinguish IS TLBI from non-IS

TLBI broadcasting was the default implementation of most of TLBI
instructions. This patch applies the broadcasting behaviour only to the
Inner-Shareable subset, while simpler TLB invalidation instructions only
affect the PE that executes them.

Change-Id: Idb01d0d4f593131f657e8fc9668112de8e4ccdcb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9182
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Created function for TLB ASID Invalidation

This patch is intended to avoid code duplication and extends the set of
TLBI ISA functions adding the entry invalidation by ASID match.

Change-Id: I9bcb498059ea480dd2118639c7b3c64fea80a5e1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9181
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, arm: Fix implicit-fallthrough GCC warnings

GCC 7 generates spurious fallthrough warnings in nested switch blocks
where the inner switch block return. There is already a GCC fix [1]
submitted for review but, until it is merged into GCC trunk, GEM5 will
not build with GCC 7 due to these fallthrough warnings. This patch
silences the spurious fallthrough warnings by appending a M5_UNREACHABLE
statement in the outer switch cases.

Note there is another GEM5 patch [2] to fix other fallthrough warnings.

[1] https://gcc.gnu.org/ml/gcc-patches/2018-02/msg01105.html
[2] https://gem5-review.googlesource.com/c/public/gem5/+/8541

Change-Id: I97cd8bfa90a88e93cee60cf27a8c93611d11a242
Signed-off-by: Chun-Chen Hsu <chunchenhsu@google.com>
Reviewed-on: https://gem5-review.googlesource.com/9101
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arm: Fix implicit-fallthrough warnings when building with gcc-7+

gcc 7 onwards have additional heuristics to detect implicit
fallthroughs and it fails the build with warnings for ARM as a result.
There was one gcc bug[1] that I fixed but the rest are cases that gcc
cannot detect due to the point at which it does the fallthrough check.
Most of this patch adds __builtin_unreachable() hints in places that throw
this warning to indicate to gcc that the fallthrough will never
happen.

The remaining cases are actually possible fallthroughs due to
incorrect code running on the simulator; in which case an Unknown
instruction is returned.

[1] https://gcc.gnu.org/ml/gcc-patches/2018-02/msg01105.html

Change-Id: I1baa9fa0ed15181c10c755c0bd777f88b607c158
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/8541
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>