1#! /usr/bin/env python
2
3# Copyright (c) 2011 ARM Limited
4# All rights reserved
5#
6# The license below extends only to copyright in the software and shall
7# not be construed as granting a license to any other intellectual
8# property including but not limited to intellectual property relating
9# to a hardware implementation of the functionality of the software
10# licensed hereunder. You may use the software subject to the license
11# terms below provided that you ensure that this notice is replicated
12# unmodified and in its entirety in all distributions of the software,
13# modified or unmodified, in source code or in binary form.
14#
15# Redistribution and use in source and binary forms, with or without
16# modification, are permitted provided that the following conditions are
17# met: redistributions of source code must retain the above copyright
18# notice, this list of conditions and the following disclaimer;
19# redistributions in binary form must reproduce the above copyright
20# notice, this list of conditions and the following disclaimer in the
21# documentation and/or other materials provided with the distribution;
22# neither the name of the copyright holders nor the names of its
23# contributors may be used to endorse or promote products derived from
24# this software without specific prior written permission.
25#
26# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
27# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
28# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
29# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
30# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
31# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
32# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
36# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37#
38# Authors: Giacomo Gabrielli
39
40# Pipeline activity viewer for the O3 CPU model.
41
42import optparse
43import os
44import sys
| 1#! /usr/bin/env python
2
3# Copyright (c) 2011 ARM Limited
4# All rights reserved
5#
6# The license below extends only to copyright in the software and shall
7# not be construed as granting a license to any other intellectual
8# property including but not limited to intellectual property relating
9# to a hardware implementation of the functionality of the software
10# licensed hereunder. You may use the software subject to the license
11# terms below provided that you ensure that this notice is replicated
12# unmodified and in its entirety in all distributions of the software,
13# modified or unmodified, in source code or in binary form.
14#
15# Redistribution and use in source and binary forms, with or without
16# modification, are permitted provided that the following conditions are
17# met: redistributions of source code must retain the above copyright
18# notice, this list of conditions and the following disclaimer;
19# redistributions in binary form must reproduce the above copyright
20# notice, this list of conditions and the following disclaimer in the
21# documentation and/or other materials provided with the distribution;
22# neither the name of the copyright holders nor the names of its
23# contributors may be used to endorse or promote products derived from
24# this software without specific prior written permission.
25#
26# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
27# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
28# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
29# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
30# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
31# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
32# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
33# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
34# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
35# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
36# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
37#
38# Authors: Giacomo Gabrielli
39
40# Pipeline activity viewer for the O3 CPU model.
41
42import optparse
43import os
44import sys
|
| 45import copy
|
45
| 46
|
| 47# Temporary storage for instructions. The queue is filled in out-of-order
48# until it reaches 'max_threshold' number of instructions. It is then
49# sorted out and instructions are printed out until their number drops to
50# 'min_threshold'.
51# It is assumed that the instructions are not out of order for more then
52# 'min_threshold' places - otherwise they will appear out of order.
53insts = {
54 'queue': [] , # Instructions to print.
55 'max_threshold':2000, # Instructions are sorted out and printed when
56 # their number reaches this threshold.
57 'min_threshold':1000, # Printing stops when this number is reached.
58 'sn_start':0, # The first instruction seq. number to be printed.
59 'sn_stop':0, # The last instruction seq. number to be printed.
60 'tick_start':0, # The first tick to be printed
61 'tick_stop':0, # The last tick to be printed
62 'tick_drift':2000, # Used to calculate the start and the end of main
63 # loop. We assume here that the instructions are not
64 # out of order for more then 2000 CPU ticks,
65 # otherwise the print may not start/stop
66 # at the time specified by tick_start/stop.
67 'only_committed':0 # Set if only committed instructions are printed.
68}
|
46
47def process_trace(trace, outfile, cycle_time, width, color, timestamps,
| 69
70def process_trace(trace, outfile, cycle_time, width, color, timestamps,
|
48 start_tick, stop_tick, start_sn, stop_sn):
| 71 committed_only, start_tick, stop_tick, start_sn, stop_sn):
72 global insts
73
74 insts['sn_start'] = start_sn
75 insts['sn_stop'] = stop_sn
76 insts['tick_start'] = start_tick
77 insts['tick_stop'] = stop_tick
78 insts['tick_drift'] = insts['tick_drift'] * cycle_time
79 insts['only_committed'] = committed_only
|
49 line = None
50 fields = None
| 80 line = None
81 fields = None
|
51 # Skip lines up to region of interest
| 82
83 # Read the first line
84 line = trace.readline()
85 if not line: return
86 fields = line.split(':')
87
88 # Skip lines up to the starting tick
|
52 if start_tick != 0:
53 while True:
| 89 if start_tick != 0:
90 while True:
|
| 91 if fields[0] != 'O3PipeView': continue
92 if (int(fields[2]) > 0 and
93 int(fields[2]) >= start_tick-insts['tick_drift']): break
|
54 line = trace.readline()
55 if not line: return
56 fields = line.split(':')
| 94 line = trace.readline()
95 if not line: return
96 fields = line.split(':')
|
57 if fields[0] != 'O3PipeView': continue
58 if int(fields[2]) >= start_tick: break
59 elif start_sn != 0:
| 97
98 # Skip lines up to the starting sequence number
99 if start_sn != 0:
|
60 while True:
| 100 while True:
|
| 101 if fields[0] != 'O3PipeView': continue
102 if (fields[1] == 'fetch' and
103 int(fields[5]) >= (start_sn-insts['max_threshold'])):
104 break
|
61 line = trace.readline()
62 if not line: return
63 fields = line.split(':')
| 105 line = trace.readline()
106 if not line: return
107 fields = line.split(':')
|
64 if fields[0] != 'O3PipeView': continue
65 if fields[1] == 'fetch' and int(fields[5]) >= start_sn: break
66 else:
67 line = trace.readline()
68 if not line: return
69 fields = line.split(':')
| 108
|
70 # Skip lines up to next instruction fetch
71 while fields[0] != 'O3PipeView' or fields[1] != 'fetch':
72 line = trace.readline()
73 if not line: return
74 fields = line.split(':')
| 109 # Skip lines up to next instruction fetch
110 while fields[0] != 'O3PipeView' or fields[1] != 'fetch':
111 line = trace.readline()
112 if not line: return
113 fields = line.split(':')
|
| 114
|
75 # Print header
76 outfile.write('// f = fetch, d = decode, n = rename, p = dispatch, '
77 'i = issue, c = complete, r = retire\n\n')
78 outfile.write(' ' + 'timeline'.center(width) +
79 ' ' + 'tick'.center(15) +
80 ' ' + 'pc.upc'.center(12) +
81 ' ' + 'disasm'.ljust(25) +
82 ' ' + 'seq_num'.center(15))
83 if timestamps:
84 outfile.write('timestamps'.center(25))
85 outfile.write('\n')
| 115 # Print header
116 outfile.write('// f = fetch, d = decode, n = rename, p = dispatch, '
117 'i = issue, c = complete, r = retire\n\n')
118 outfile.write(' ' + 'timeline'.center(width) +
119 ' ' + 'tick'.center(15) +
120 ' ' + 'pc.upc'.center(12) +
121 ' ' + 'disasm'.ljust(25) +
122 ' ' + 'seq_num'.center(15))
123 if timestamps:
124 outfile.write('timestamps'.center(25))
125 outfile.write('\n')
|
| 126
|
86 # Region of interest
87 curr_inst = {}
88 while True:
89 if fields[0] == 'O3PipeView':
90 curr_inst[fields[1]] = int(fields[2])
91 if fields[1] == 'fetch':
| 127 # Region of interest
128 curr_inst = {}
129 while True:
130 if fields[0] == 'O3PipeView':
131 curr_inst[fields[1]] = int(fields[2])
132 if fields[1] == 'fetch':
|
92 if ((stop_tick > 0 and int(fields[2]) > stop_tick) or
93 (stop_sn > 0 and int(fields[5]) > stop_sn)):
| 133 if ((stop_tick > 0 and int(fields[2]) > stop_tick+insts['tick_drift']) or
134 (stop_sn > 0 and int(fields[5]) > (stop_sn+insts['max_threshold']))):
135 print_insts(outfile, cycle_time, width, color, timestamps, 0)
|
94 return
95 (curr_inst['pc'], curr_inst['upc']) = fields[3:5]
96 curr_inst['sn'] = int(fields[5])
97 curr_inst['disasm'] = ' '.join(fields[6][:-1].split())
98 elif fields[1] == 'retire':
| 136 return
137 (curr_inst['pc'], curr_inst['upc']) = fields[3:5]
138 curr_inst['sn'] = int(fields[5])
139 curr_inst['disasm'] = ' '.join(fields[6][:-1].split())
140 elif fields[1] == 'retire':
|
99 print_inst(outfile, curr_inst, cycle_time, width, color,
100 timestamps)
| 141 queue_inst(outfile, curr_inst, cycle_time, width, color, timestamps)
|
101 line = trace.readline()
102 if not line: return
103 fields = line.split(':')
104
105
| 142 line = trace.readline()
143 if not line: return
144 fields = line.split(':')
145
146
|
| 147#Sorts out instructions according to sequence number
148def compare_by_sn(a, b):
149 return cmp(a['sn'], b['sn'])
150
151# Puts new instruction into the print queue.
152# Sorts out and prints instructions when their number reaches threshold value
153def queue_inst(outfile, inst, cycle_time, width, color, timestamps):
154 global insts
155 l_copy = copy.deepcopy(inst)
156 insts['queue'].append(l_copy)
157 if len(insts['queue']) > insts['max_threshold']:
158 print_insts(outfile, cycle_time, width, color, timestamps, insts['min_threshold'])
159
160# Sorts out and prints instructions in print queue
161def print_insts(outfile, cycle_time, width, color, timestamps, lower_threshold):
162 global insts
163 insts['queue'].sort(compare_by_sn)
164 while len(insts['queue']) > lower_threshold:
165 print_item=insts['queue'].pop(0)
166 # As the instructions are processed out of order the main loop starts
167 # earlier then specified by start_sn/tick and finishes later then what
168 # is defined in stop_sn/tick.
169 # Therefore, here we have to filter out instructions that reside out of
170 # the specified boundaries.
171 if (insts['sn_start'] > 0 and print_item['sn'] < insts['sn_start']):
172 continue; # earlier then the starting sequence number
173 if (insts['sn_stop'] > 0 and print_item['sn'] > insts['sn_stop']):
174 continue; # later then the ending sequence number
175 if (insts['tick_start'] > 0 and print_item['fetch'] < insts['tick_start']):
176 continue; # earlier then the starting tick number
177 if (insts['tick_stop'] > 0 and print_item['fetch'] > insts['tick_stop']):
178 continue; # later then the ending tick number
179
180 if (insts['only_committed'] != 0 and print_item['retire'] == 0):
181 continue; # retire is set to zero if it hasn't been completed
182 print_inst(outfile, print_item, cycle_time, width, color, timestamps)
183
184# Prints a single instruction
|
106def print_inst(outfile, inst, cycle_time, width, color, timestamps):
107 if color:
108 from m5.util.terminal import termcap
109 else:
110 from m5.util.terminal import no_termcap as termcap
111 # Pipeline stages
112 stages = [{'name': 'fetch',
113 'color': termcap.Blue + termcap.Reverse,
114 'shorthand': 'f'},
115 {'name': 'decode',
116 'color': termcap.Yellow + termcap.Reverse,
117 'shorthand': 'd'},
118 {'name': 'rename',
119 'color': termcap.Magenta + termcap.Reverse,
120 'shorthand': 'n'},
121 {'name': 'dispatch',
122 'color': termcap.Green + termcap.Reverse,
123 'shorthand': 'p'},
124 {'name': 'issue',
125 'color': termcap.Red + termcap.Reverse,
126 'shorthand': 'i'},
127 {'name': 'complete',
128 'color': termcap.Cyan + termcap.Reverse,
129 'shorthand': 'c'},
130 {'name': 'retire',
131 'color': termcap.Blue + termcap.Reverse,
132 'shorthand': 'r'}]
| 185def print_inst(outfile, inst, cycle_time, width, color, timestamps):
186 if color:
187 from m5.util.terminal import termcap
188 else:
189 from m5.util.terminal import no_termcap as termcap
190 # Pipeline stages
191 stages = [{'name': 'fetch',
192 'color': termcap.Blue + termcap.Reverse,
193 'shorthand': 'f'},
194 {'name': 'decode',
195 'color': termcap.Yellow + termcap.Reverse,
196 'shorthand': 'd'},
197 {'name': 'rename',
198 'color': termcap.Magenta + termcap.Reverse,
199 'shorthand': 'n'},
200 {'name': 'dispatch',
201 'color': termcap.Green + termcap.Reverse,
202 'shorthand': 'p'},
203 {'name': 'issue',
204 'color': termcap.Red + termcap.Reverse,
205 'shorthand': 'i'},
206 {'name': 'complete',
207 'color': termcap.Cyan + termcap.Reverse,
208 'shorthand': 'c'},
209 {'name': 'retire',
210 'color': termcap.Blue + termcap.Reverse,
211 'shorthand': 'r'}]
|
| 212
|
133 # Print
| 213 # Print
|
| 214
|
134 time_width = width * cycle_time
135 base_tick = (inst['fetch'] / time_width) * time_width
| 215 time_width = width * cycle_time
216 base_tick = (inst['fetch'] / time_width) * time_width
|
| 217
218 # Find out the time of the last event - it may not
219 # be 'retire' if the instruction is not comlpeted.
220 last_event_time = max(inst['fetch'], inst['decode'],inst['rename'],
221 inst['dispatch'],inst['issue'], inst['complete'], inst['retire'])
222
|
136 # Timeline shorter then time_width is printed in compact form where
137 # the print continues at the start of the same line.
| 223 # Timeline shorter then time_width is printed in compact form where
224 # the print continues at the start of the same line.
|
138 if ((inst['retire'] - inst['fetch']) < time_width):
| 225 if ((last_event_time - inst['fetch']) < time_width):
|
139 num_lines = 1 # compact form
140 else:
| 226 num_lines = 1 # compact form
227 else:
|
141 num_lines = ((inst['retire'] - base_tick) / time_width) + 1
| 228 num_lines = ((last_event_time - base_tick) / time_width) + 1
|
142
143 curr_color = termcap.Normal
| 229
230 curr_color = termcap.Normal
|
| 231
232 # This will visually distinguish completed and abandoned intructions.
233 if inst['retire'] == 0: dot = '=' # abandoned instruction
234 else: dot = '.' # completed instruction
235
|
144 for i in range(num_lines):
145 start_tick = base_tick + i * time_width
146 end_tick = start_tick + time_width
147 if num_lines == 1: # compact form
148 end_tick += (inst['fetch'] - base_tick)
149 events = []
150 for stage_idx in range(len(stages)):
151 tick = inst[stages[stage_idx]['name']]
| 236 for i in range(num_lines):
237 start_tick = base_tick + i * time_width
238 end_tick = start_tick + time_width
239 if num_lines == 1: # compact form
240 end_tick += (inst['fetch'] - base_tick)
241 events = []
242 for stage_idx in range(len(stages)):
243 tick = inst[stages[stage_idx]['name']]
|
152 if tick >= start_tick and tick < end_tick:
153 events.append((tick % time_width,
154 stages[stage_idx]['name'],
155 stage_idx))
| 244 if tick != 0:
245 if tick >= start_tick and tick < end_tick:
246 events.append((tick % time_width,
247 stages[stage_idx]['name'],
248 stage_idx, tick))
|
156 events.sort()
157 outfile.write('[')
158 pos = 0
159 if num_lines == 1 and events[0][2] != 0: # event is not fetch
160 curr_color = stages[events[0][2] - 1]['color']
161 for event in events:
162 if (stages[event[2]]['name'] == 'dispatch' and
163 inst['dispatch'] == inst['issue']):
164 continue
| 249 events.sort()
250 outfile.write('[')
251 pos = 0
252 if num_lines == 1 and events[0][2] != 0: # event is not fetch
253 curr_color = stages[events[0][2] - 1]['color']
254 for event in events:
255 if (stages[event[2]]['name'] == 'dispatch' and
256 inst['dispatch'] == inst['issue']):
257 continue
|
165 outfile.write(curr_color + '.' * ((event[0] / cycle_time) - pos))
| 258 outfile.write(curr_color + dot * ((event[0] / cycle_time) - pos))
|
166 outfile.write(stages[event[2]]['color'] +
167 stages[event[2]]['shorthand'])
| 259 outfile.write(stages[event[2]]['color'] +
260 stages[event[2]]['shorthand'])
|
168 if event[2] != len(stages) - 1: # event is not retire
| 261
262 if event[3] != last_event_time: # event is not the last one
|
169 curr_color = stages[event[2]]['color']
170 else:
171 curr_color = termcap.Normal
| 263 curr_color = stages[event[2]]['color']
264 else:
265 curr_color = termcap.Normal
|
| 266
|
172 pos = (event[0] / cycle_time) + 1
| 267 pos = (event[0] / cycle_time) + 1
|
173 outfile.write(curr_color + '.' * (width - pos) + termcap.Normal +
| 268 outfile.write(curr_color + dot * (width - pos) + termcap.Normal +
|
174 ']-(' + str(base_tick + i * time_width).rjust(15) + ') ')
175 if i == 0:
176 outfile.write('%s.%s %s [%s]' % (
177 inst['pc'].rjust(10),
178 inst['upc'],
179 inst['disasm'].ljust(25),
180 str(inst['sn']).rjust(15)))
181 if timestamps:
182 outfile.write(' f=%s, r=%s' % (inst['fetch'], inst['retire']))
183 outfile.write('\n')
184 else:
185 outfile.write('...'.center(12) + '\n')
186
187
188def validate_range(my_range):
189 my_range = [int(i) for i in my_range.split(':')]
190 if (len(my_range) != 2 or
191 my_range[0] < 0 or
192 my_range[1] > 0 and my_range[0] >= my_range[1]):
193 return None
194 return my_range
195
196
197def main():
198 # Parse options
199 usage = ('%prog [OPTION]... TRACE_FILE')
200 parser = optparse.OptionParser(usage=usage)
201 parser.add_option(
202 '-o',
203 dest='outfile',
204 default=os.path.join(os.getcwd(), 'o3-pipeview.out'),
205 help="output file (default: '%default')")
206 parser.add_option(
207 '-t',
208 dest='tick_range',
209 default='0:-1',
210 help="tick range (default: '%default'; -1 == inf.)")
211 parser.add_option(
212 '-i',
213 dest='inst_range',
214 default='0:-1',
215 help="instruction range (default: '%default'; -1 == inf.)")
216 parser.add_option(
217 '-w',
218 dest='width',
219 type='int', default=80,
220 help="timeline width (default: '%default')")
221 parser.add_option(
222 '--color',
223 action='store_true', default=False,
224 help="enable colored output (default: '%default')")
225 parser.add_option(
226 '-c', '--cycle-time',
227 type='int', default=1000,
228 help="CPU cycle time in ticks (default: '%default')")
229 parser.add_option(
230 '--timestamps',
231 action='store_true', default=False,
232 help="print fetch and retire timestamps (default: '%default')")
| 269 ']-(' + str(base_tick + i * time_width).rjust(15) + ') ')
270 if i == 0:
271 outfile.write('%s.%s %s [%s]' % (
272 inst['pc'].rjust(10),
273 inst['upc'],
274 inst['disasm'].ljust(25),
275 str(inst['sn']).rjust(15)))
276 if timestamps:
277 outfile.write(' f=%s, r=%s' % (inst['fetch'], inst['retire']))
278 outfile.write('\n')
279 else:
280 outfile.write('...'.center(12) + '\n')
281
282
283def validate_range(my_range):
284 my_range = [int(i) for i in my_range.split(':')]
285 if (len(my_range) != 2 or
286 my_range[0] < 0 or
287 my_range[1] > 0 and my_range[0] >= my_range[1]):
288 return None
289 return my_range
290
291
292def main():
293 # Parse options
294 usage = ('%prog [OPTION]... TRACE_FILE')
295 parser = optparse.OptionParser(usage=usage)
296 parser.add_option(
297 '-o',
298 dest='outfile',
299 default=os.path.join(os.getcwd(), 'o3-pipeview.out'),
300 help="output file (default: '%default')")
301 parser.add_option(
302 '-t',
303 dest='tick_range',
304 default='0:-1',
305 help="tick range (default: '%default'; -1 == inf.)")
306 parser.add_option(
307 '-i',
308 dest='inst_range',
309 default='0:-1',
310 help="instruction range (default: '%default'; -1 == inf.)")
311 parser.add_option(
312 '-w',
313 dest='width',
314 type='int', default=80,
315 help="timeline width (default: '%default')")
316 parser.add_option(
317 '--color',
318 action='store_true', default=False,
319 help="enable colored output (default: '%default')")
320 parser.add_option(
321 '-c', '--cycle-time',
322 type='int', default=1000,
323 help="CPU cycle time in ticks (default: '%default')")
324 parser.add_option(
325 '--timestamps',
326 action='store_true', default=False,
327 help="print fetch and retire timestamps (default: '%default')")
|
| 328 parser.add_option(
329 '--only_committed',
330 action='store_true', default=False,
331 help="display only committed (completed) instructions (default: '%default')")
|
233 (options, args) = parser.parse_args()
234 if len(args) != 1:
235 parser.error('incorrect number of arguments')
236 sys.exit(1)
237 tick_range = validate_range(options.tick_range)
238 if not tick_range:
239 parser.error('invalid range')
240 sys.exit(1)
241 inst_range = validate_range(options.inst_range)
242 if not inst_range:
243 parser.error('invalid range')
244 sys.exit(1)
245 # Process trace
246 print 'Processing trace... ',
247 with open(args[0], 'r') as trace:
248 with open(options.outfile, 'w') as out:
249 process_trace(trace, out, options.cycle_time, options.width,
250 options.color, options.timestamps,
| 332 (options, args) = parser.parse_args()
333 if len(args) != 1:
334 parser.error('incorrect number of arguments')
335 sys.exit(1)
336 tick_range = validate_range(options.tick_range)
337 if not tick_range:
338 parser.error('invalid range')
339 sys.exit(1)
340 inst_range = validate_range(options.inst_range)
341 if not inst_range:
342 parser.error('invalid range')
343 sys.exit(1)
344 # Process trace
345 print 'Processing trace... ',
346 with open(args[0], 'r') as trace:
347 with open(options.outfile, 'w') as out:
348 process_trace(trace, out, options.cycle_time, options.width,
349 options.color, options.timestamps,
|
251 *(tick_range + inst_range))
| 350 options.only_committed, *(tick_range + inst_range))
|
252 print 'done!'
253
254
255if __name__ == '__main__':
256 sys.path.append(os.path.join(
257 os.path.dirname(os.path.abspath(__file__)),
258 '..', 'src', 'python'))
259 main()
| 351 print 'done!'
352
353
354if __name__ == '__main__':
355 sys.path.append(os.path.join(
356 os.path.dirname(os.path.abspath(__file__)),
357 '..', 'src', 'python'))
358 main()
|