1[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
| 1Booting Linux on physical CPU 0x0
|
2
| 2
|
3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
| 3Initializing cgroup subsys cpuset
|
4
| 4
|
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
| 5Linux version 3.13.0-rc2 (tony@vamp) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Mon Oct 13 15:09:23 EDT 2014
|
6
| 6
|
7[ 0.000000] Machine: ARM-RealView PBX
| 7Kernel was built at commit id ''
|
8
| 8
|
9[ 0.000000] Ignoring unrecognised tag 0x00000000
| 9CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
|
10
| 10
|
11[ 0.000000] bootconsole [earlycon0] enabled
| 11CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
12
| 12
|
13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
| 13Machine model: V2P-CA15
|
14
| 14
|
15[ 0.000000] On node 0 totalpages: 32768
| 15bootconsole [earlycon0] enabled
|
16
| 16
|
17[ 0.000000] DMA zone: 256 pages used for memmap
| 17Memory policy: Data cache writealloc
|
18
| 18
|
19[ 0.000000] DMA zone: 0 pages reserved
| 19kdebugv2m: Following are test values to confirm proper working
|
20
| 20
|
21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
| 21kdebugv2m: Ranges 42000000 0
|
22
| 22
|
23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
| 23kdebugv2m: Regs 30000000 1000000
|
24
| 24
|
25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
| 25kdebugv2m: Virtual-Reg f0000000
|
26
| 26
|
27[ 0.000000] pcpu-alloc: [0] 0
| 27kdebugv2m: pci node addr_cells 3
|
28
| 28
|
29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
| 29kdebugv2m: pci node size_cells 2
|
30
| 30
|
31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
| 31kdebugv2m: motherboard addr_cells 2
|
32
| 32
|
33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
| 33On node 0 totalpages: 65536
|
34
| 34
|
35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
| 35free_area_init_node: node 0, pgdat 8072dcc0, node_mem_map 8078f000
|
36
| 36
|
37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
| 37 Normal zone: 512 pages used for memmap
|
38
| 38
|
39[ 0.000000] Memory: 128MB = 128MB total
| 39 Normal zone: 0 pages reserved
|
40
| 40
|
41[ 0.000000] Memory: 125408k/125408k available, 5664k reserved, 0K highmem
| 41 Normal zone: 65536 pages, LIFO batch:15
|
42
| 42
|
43[ 0.000000] Virtual kernel memory layout:
| 43sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
|
44
| 44
|
45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
| 45PERCPU: Embedded 8 pages/cpu @80996000 s11648 r8192 d12928 u32768
|
46
| 46
|
47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
| 47pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096
|
48
| 48
|
49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
| 49pcpu-alloc: [0] 0
|
50
| 50
|
51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
| 51Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
|
52
| 52
|
53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
| 53Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=256MB root=/dev/sda1
|
54
| 54
|
55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
| 55PID hash table entries: 1024 (order: 0, 4096 bytes)
|
56
| 56
|
57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
| 57Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
|
58
| 58
|
59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
| 59Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
|
60
| 60
|
61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
| 61Memory: 235688K/262144K available (5248K kernel code, 249K rwdata, 1540K rodata, 295K init, 368K bss, 26456K reserved, 0K highmem)
|
62
| 62
|
63[ 0.000000] Hierarchical RCU implementation.
| 63Virtual kernel memory layout:
|
64
| 64
|
65[ 0.000000] RCU-based detection of stalled CPUs is disabled.
| 65 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
66
| 66
|
67[ 0.000000] NR_IRQS:128
| 67 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
|
68
| 68
|
69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
| 69 vmalloc : 0x90800000 - 0xff000000 (1768 MB)
|
70
| 70
|
71[ 0.000000] Console: colour dummy device 80x30
| 71 lowmem : 0x80000000 - 0x90000000 ( 256 MB)
|
72
| 72
|
73[ 0.000190] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
| 73 pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
|
74
| 74
|
75[ 0.000273] pid_max: default: 32768 minimum: 301
| 75 modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
|
76
| 76
|
77[ 0.000492] Mount-cache hash table entries: 512
| 77 .text : 0x80008000 - 0x806a942c (6790 kB)
|
78
| 78
|
79[ 0.000841] CPU: Testing write buffer coherency: ok
| 79 .init : 0x806aa000 - 0x806f3d80 ( 296 kB)
|
80
| 80
|
81[ 0.001127] Brought up 1 CPUs
| 81 .data : 0x806f4000 - 0x80732754 ( 250 kB)
|
82
| 82
|
83[ 0.001161] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
| 83 .bss : 0x80732754 - 0x8078e9d8 ( 369 kB)
|
84
| 84
|
85[ 0.001346] devtmpfs: initialized
| 85SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
86
| 86
|
87[ 0.002764] NET: Registered protocol family 16
| 87Preemptible hierarchical RCU implementation.
|
88
| 88
|
89[ 0.003964] Serial: AMBA PL011 UART driver
| 89 RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
|
90
| 90
|
91[ 0.004042] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
| 91NR_IRQS:16 nr_irqs:16 16
|
92
| 92
|
93[ 0.004116] console [ttyAMA0] enabled, bootconsole disabled
94[ 0.004116] console [ttyAMA0] enabled, bootconsole disabled
| 93Architected cp15 timer(s) running at 25.16MHz (phys).
|
95
| 94
|
96[ 0.008382] bio: create slab <bio-0> at 0
97[ 0.009076] SCSI subsystem initialized
98[ 0.009316] libata version 3.00 loaded.
99[ 0.009872] Switching to clocksource timer3
100[ 0.017485] NET: Registered protocol family 2
101[ 0.017602] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
102[ 0.017864] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
103[ 0.018020] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
104[ 0.018166] TCP: Hash tables configured (established 4096 bind 4096)
105[ 0.018211] TCP reno registered
106[ 0.018238] UDP hash table entries: 128 (order: 0, 4096 bytes)
107[ 0.018303] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
108[ 0.018528] NET: Registered protocol family 1
109[ 0.019574] msgmni has been set to 244
110[ 0.019617] io scheduler noop registered (default)
111[ 0.022390] CLCD: RealView hardware, XVGA display
112[ 0.069884] Console: switching to colour frame buffer device 128x48
113[ 0.095901] brd: module loaded
114[ 0.098342] loop: module loaded
115[ 0.099406] scsi0 : pata_platform
116[ 0.099658] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
117[ 0.100559] slram: not enough parameters.
118[ 0.101122] mousedev: PS/2 mouse device common for all mice
119[ 0.101438] TCP cubic registered
120[ 0.101464] NET: Registered protocol family 17
121[ 0.101501] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
122 [ 0.250198] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
123[ 0.250238] ata1.00: 1048320 sectors, multi 0: LBA
124[ 0.250278] ata1.00: configured for PIO
125[ 0.250483] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
126[ 0.250963] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
127[ 0.251128] sd 0:0:0:0: [sda] Write Protect is off
128[ 0.251166] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
129[ 0.251251] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
130[ 0.252448] sda: sda1
131[ 0.252627] sd 0:0:0:0: Attached scsi generic sg0 type 0
132[ 0.253053] sd 0:0:0:0: [sda] Attached SCSI disk
133[ 0.700298] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
134[ 2.300258] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
135[ 2.321157] VFS: Mounted root (ext2 filesystem) on device 8:1.
136[ 2.321633] devtmpfs: mounted
137[ 2.321685] Freeing init memory: 132K
| 95sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
|
138
| 96
|
| 97Switching to timer-based delay loop
98
99Console: colour dummy device 80x30
100
101Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
102
103pid_max: default: 32768 minimum: 301
104
105Mount-cache hash table entries: 512
106
107CPU: Testing write buffer coherency: ok
108
109CPU0: update cpu_power 1024
110
111CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
112
113Setting up static identity map for 0x804fee68 - 0x804fee9c
114
115Brought up 1 CPUs
116
117SMP: Total of 1 processors activated.
118
119CPU: All CPU(s) started in SVC mode.
120
121VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
122
123NET: Registered protocol family 16
124
125DMA: preallocated 256 KiB pool for atomic coherent allocations
126
127of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
128
129of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/aaci@040000
130
131of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/mmci@050000
132
133of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
134
135of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
136
137of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
138
139of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
140
141hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
142
143hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
144
145hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
146
147hw-breakpoint: CPU 0 failed to disable vector catch
148
149Serial: AMBA PL011 UART driver
150
1511c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
152
153console [ttyAMA0] enabled
154console [ttyAMA0] enabled
155
156bootconsole [earlycon0] disabled
157bootconsole [earlycon0] disabled
158
159PCI host bridge to bus 0000:00
160pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
161pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
162pci_bus 0000:00: root bus resource [bus 00-ff]
163pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
164pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
165pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
166pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
167pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
168pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
169pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
170pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
171pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
172pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
173PCI: bus0: Fast back to back transfers disabled
174pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
175pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
176pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
177pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
178pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
179pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
180pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
181pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
182pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
183pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
184PCI map irq: slot 0, pin 1, devslot 0, irq: 68
185PCI map irq: slot 1, pin 2, devslot 1, irq: 69
186bio: create slab <bio-0> at 0
187vgaarb: loaded
188SCSI subsystem initialized
189libata version 3.00 loaded.
190usbcore: registered new interface driver usbfs
191usbcore: registered new interface driver hub
192usbcore: registered new device driver usb
193pps_core: LinuxPPS API ver. 1 registered
194pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
195PTP clock support registered
196Advanced Linux Sound Architecture Driver Initialized.
197Switched to clocksource arch_sys_counter
198NET: Registered protocol family 2
199TCP established hash table entries: 2048 (order: 1, 8192 bytes)
200TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
201TCP: Hash tables configured (established 2048 bind 2048)
202TCP: reno registered
203UDP hash table entries: 256 (order: 1, 8192 bytes)
204UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
205NET: Registered protocol family 1
206RPC: Registered named UNIX socket transport module.
207RPC: Registered udp transport module.
208RPC: Registered tcp transport module.
209RPC: Registered tcp NFSv4.1 backchannel transport module.
210PCI: CLS 64 bytes, default 64
211hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
212jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
213msgmni has been set to 460
214io scheduler noop registered (default)
215brd: module loaded
216loop: module loaded
217ata_piix 0000:00:01.0: version 2.13
218PCI: enabling device 0000:00:01.0 (0040 -> 0041)
219scsi0 : ata_piix
220scsi1 : ata_piix
221ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
222ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
223e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
224e100: Copyright(c) 1999-2006 Intel Corporation
225e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
226e1000: Copyright (c) 1999-2006 Intel Corporation.
227PCI: enabling device 0000:00:00.0 (0040 -> 0042)
228ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
229ata1.00: 1048320 sectors, multi 0: LBA
230ata1.00: configured for UDMA/33
231scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
232sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
233sd 0:0:0:0: [sda] Write Protect is off
234sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
235sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
236 sda: sda1
237sd 0:0:0:0: Attached scsi generic sg0 type 0
238sd 0:0:0:0: [sda] Attached SCSI disk
239e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
240e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
241e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
242e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
243igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
244igb: Copyright (c) 2007-2013 Intel Corporation.
245igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
246igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
247ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
248ixgbe: Copyright (c) 1999-2013 Intel Corporation.
249ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k
250ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
251ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
252ixgb: Copyright (c) 1999-2008 Intel Corporation.
253smsc911x: Driver version 2008-10-21
254smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
255nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
256nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
257nxp-isp1760 1b000000.usb: Scratch test failed.
258nxp-isp1760 1b000000.usb: can't setup: -19
259nxp-isp1760 1b000000.usb: USB bus 1 deregistered
260usbcore: registered new interface driver usb-storage
261mousedev: PS/2 mouse device common for all mice
262rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
263usbcore: registered new interface driver usbhid
264usbhid: USB HID core driver
265ashmem: initialized
266logger: created 256K log 'log_main'
267logger: created 256K log 'log_events'
268logger: created 256K log 'log_radio'
269logger: created 256K log 'log_system'
270oprofile: using timer interrupt.
271TCP: cubic registered
272NET: Registered protocol family 10
273NET: Registered protocol family 17
274rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 12:00:00 UTC (1230811200)
275ALSA device list:
276 No soundcards found.
277 input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
278input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
279VFS: Mounted root (ext2 filesystem) on device 8:1.
280Freeing unused kernel memory: 292K (806aa000 - 806f3000)
281
|
139init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
140
| 282init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
283
|
141starting pid 331, tty '': '/etc/rc.d/rc.local'
| 284starting pid 673, tty '': '/etc/rc.d/rc.local'
|
142warning: can't open /etc/mtab: No such file or directory
| 285warning: can't open /etc/mtab: No such file or directory
|
143Thu Jan 1 00:00:02 UTC 1970
| 286Thu Jan 1 12:00:02 UTC 2009
|
144S: devpts
| 287S: devpts
|
145Thu Jan 1 00:00:02 UTC 1970
| 288Thu Jan 1 12:00:02 UTC 2009
|
| |