1[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
| 1Booting Linux on physical CPU 0x0
|
2
| 2
|
3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
| 3Initializing cgroup subsys cpuset
|
4
| 4
|
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
| 5Linux version 3.13.0-rc2 (tony@vamp) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Mon Oct 13 15:09:23 EDT 2014
|
6
| 6
|
7[ 0.000000] Machine: ARM-RealView PBX
| 7Kernel was built at commit id ''
|
8
| 8
|
9[ 0.000000] Ignoring unrecognised tag 0x00000000
| 9CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
|
10
| 10
|
11[ 0.000000] bootconsole [earlycon0] enabled
| 11CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
12
| 12
|
13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
| 13Machine model: V2P-CA15
|
14
| 14
|
15[ 0.000000] On node 0 totalpages: 32768
| 15bootconsole [earlycon0] enabled
|
16
| 16
|
17[ 0.000000] DMA zone: 256 pages used for memmap
| 17Memory policy: Data cache writealloc
|
18
| 18
|
19[ 0.000000] DMA zone: 0 pages reserved
| 19kdebugv2m: Following are test values to confirm proper working
|
20
| 20
|
21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
| 21kdebugv2m: Ranges 42000000 0
|
22
| 22
|
23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
| 23kdebugv2m: Regs 30000000 1000000
|
24
| 24
|
25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
| 25kdebugv2m: Virtual-Reg f0000000
|
26
| 26
|
27[ 0.000000] pcpu-alloc: [0] 0 [0] 1
| 27kdebugv2m: pci node addr_cells 3
|
28
| 28
|
29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
| 29kdebugv2m: pci node size_cells 2
|
30
| 30
|
31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
| 31kdebugv2m: motherboard addr_cells 2
|
32
| 32
|
33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
| 33On node 0 totalpages: 65536
|
34
| 34
|
35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
| 35free_area_init_node: node 0, pgdat 8072dcc0, node_mem_map 8078f000
|
36
| 36
|
37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
| 37 Normal zone: 512 pages used for memmap
|
38
| 38
|
39[ 0.000000] Memory: 128MB = 128MB total
| 39 Normal zone: 0 pages reserved
|
40
| 40
|
41[ 0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem
| 41 Normal zone: 65536 pages, LIFO batch:15
|
42
| 42
|
43[ 0.000000] Virtual kernel memory layout:
| 43sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
|
44
| 44
|
45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
| 45PERCPU: Embedded 8 pages/cpu @80996000 s11648 r8192 d12928 u32768
|
46
| 46
|
47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
| 47pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096
|
48
| 48
|
49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
| 49pcpu-alloc: [0] 0 [0] 1
|
50
| 50
|
51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
| 51Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
|
52
| 52
|
53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
| 53Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=256MB root=/dev/sda1
|
54
| 54
|
55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
| 55PID hash table entries: 1024 (order: 0, 4096 bytes)
|
56
| 56
|
57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
| 57Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
|
58
| 58
|
59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
| 59Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
|
60
| 60
|
61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
| 61Memory: 235656K/262144K available (5248K kernel code, 249K rwdata, 1540K rodata, 295K init, 368K bss, 26488K reserved, 0K highmem)
|
62
| 62
|
63[ 0.000000] Hierarchical RCU implementation.
| 63Virtual kernel memory layout:
|
64
| 64
|
65[ 0.000000] RCU-based detection of stalled CPUs is disabled.
| 65 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
66
| 66
|
67[ 0.000000] NR_IRQS:128
| 67 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
|
68
| 68
|
69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
| 69 vmalloc : 0x90800000 - 0xff000000 (1768 MB)
|
70
| 70
|
71[ 0.000000] Console: colour dummy device 80x30
| 71 lowmem : 0x80000000 - 0x90000000 ( 256 MB)
|
72
| 72
|
73[ 0.000061] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
| 73 pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
|
74
| 74
|
75[ 0.000069] pid_max: default: 32768 minimum: 301
| 75 modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
|
76
| 76
|
77[ 0.000130] Mount-cache hash table entries: 512
| 77 .text : 0x80008000 - 0x806a942c (6790 kB)
|
78
| 78
|
79[ 0.000234] CPU: Testing write buffer coherency: ok
| 79 .init : 0x806aa000 - 0x806f3d80 ( 296 kB)
|
80
| 80
|
81[ 0.000253] Calibrating local timer... 1000.00MHz.
| 81 .data : 0x806f4000 - 0x80732754 ( 250 kB)
|
82
| 82
|
83[ 0.060104] CPU1: Booted secondary processor
| 83 .bss : 0x80732754 - 0x8078e9d8 ( 369 kB)
|
84
| 84
|
85[ 0.060115] CPU1: Unknown IPI message 0x1
| 85SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
|
86
| 86
|
87[ 0.060127] Brought up 2 CPUs
| 87Preemptible hierarchical RCU implementation.
|
88
| 88
|
89[ 0.060133] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
| 89 RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
|
90
| 90
|
91[ 0.060180] devtmpfs: initialized
| 91NR_IRQS:16 nr_irqs:16 16
|
92
| 92
|
93[ 0.060720] NET: Registered protocol family 16
| 93Architected cp15 timer(s) running at 25.16MHz (phys).
|
94
| 94
|
95[ 0.061057] Serial: AMBA PL011 UART driver
| 95sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
|
96
| 96
|
97[ 0.061070] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
| 97Switching to timer-based delay loop
|
98
| 98
|
99[ 0.061076] console [ttyAMA0] enabled, bootconsole disabled
100[ 0.061076] console [ttyAMA0] enabled, bootconsole disabled
| 99Console: colour dummy device 80x30
|
101
| 100
|
102[ 0.062351] bio: create slab <bio-0> at 0
103[ 0.062557] SCSI subsystem initialized
104[ 0.062619] libata version 3.00 loaded.
105[ 0.062780] Switching to clocksource timer3
106[ 0.065082] NET: Registered protocol family 2
107[ 0.065112] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
108[ 0.065188] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
109[ 0.065217] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
110[ 0.065244] TCP: Hash tables configured (established 4096 bind 4096)
111[ 0.065248] TCP reno registered
112[ 0.065252] UDP hash table entries: 128 (order: 0, 4096 bytes)
113[ 0.065262] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
114[ 0.065332] NET: Registered protocol family 1
115[ 0.065648] msgmni has been set to 244
116[ 0.065656] io scheduler noop registered (default)
117[ 0.066116] CLCD: RealView hardware, XVGA display
118[ 0.093218] Console: switching to colour frame buffer device 128x48
119[ 0.098678] brd: module loaded
120[ 0.099561] loop: module loaded
121[ 0.099871] scsi0 : pata_platform
122[ 0.099946] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
123[ 0.100164] slram: not enough parameters.
124[ 0.100308] mousedev: PS/2 mouse device common for all mice
125[ 0.100402] TCP cubic registered
126[ 0.100404] NET: Registered protocol family 17
127[ 0.100409] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
128 [ 0.260218] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
129[ 0.260222] ata1.00: 1048320 sectors, multi 0: LBA
130[ 0.260228] ata1.00: configured for PIO
131[ 0.260282] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
132[ 0.260422] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
133[ 0.260465] sd 0:0:0:0: [sda] Write Protect is off
134[ 0.260470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
135[ 0.260473] sd 0:0:0:0: Attached scsi generic sg0 type 0
136[ 0.260494] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
137[ 0.260805] sda: sda1
138[ 0.260978] sd 0:0:0:0: [sda] Attached SCSI disk
139[ 0.700110] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
140[ 0.840517] VFS: Mounted root (ext2 filesystem) on device 8:1.
141[ 0.840715] devtmpfs: mounted
142[ 0.840727] Freeing init memory: 132K
| 101Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
|
143
| 102
|
| 103pid_max: default: 32768 minimum: 301
104
105Mount-cache hash table entries: 512
106
107CPU: Testing write buffer coherency: ok
108
109/cpus/cpu@1 missing clock-frequency property
110
111CPU0: update cpu_power 1024
112
113CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
114
115Setting up static identity map for 0x804fee68 - 0x804fee9c
116
117CPU1: Booted secondary processor
118
119CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
120
121Brought up 2 CPUs
122
123SMP: Total of 2 processors activated.
124
125CPU: All CPU(s) started in SVC mode.
126
127VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
128
129NET: Registered protocol family 16
130
131DMA: preallocated 256 KiB pool for atomic coherent allocations
132
133of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
134
135of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/aaci@040000
136
137of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/mmci@050000
138
139of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
140
141of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
142
143of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
144
145of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
146
147hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 1
148
149hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 1
150
151hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
152
153hw-breakpoint: CPU 1 failed to disable vector catch
154
155hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
156
157hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
158
159hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
160
161Serial: AMBA PL011 UART driver
162
1631c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
164
165console [ttyAMA0] enabled
166console [ttyAMA0] enabled
167
168bootconsole [earlycon0] disabled
169bootconsole [earlycon0] disabled
170
171PCI host bridge to bus 0000:00
172pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
173pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
174pci_bus 0000:00: root bus resource [bus 00-ff]
175pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
176pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
177pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
178pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
179pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
180pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
181pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
182pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
183pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
184pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
185PCI: bus0: Fast back to back transfers disabled
186pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
187pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
188pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
189pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
190pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
191pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
192pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
193pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
194pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
195pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
196PCI map irq: slot 0, pin 1, devslot 0, irq: 68
197PCI map irq: slot 1, pin 2, devslot 1, irq: 69
198bio: create slab <bio-0> at 0
199vgaarb: loaded
200SCSI subsystem initialized
201libata version 3.00 loaded.
202usbcore: registered new interface driver usbfs
203usbcore: registered new interface driver hub
204usbcore: registered new device driver usb
205pps_core: LinuxPPS API ver. 1 registered
206pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
207PTP clock support registered
208Advanced Linux Sound Architecture Driver Initialized.
209Switched to clocksource arch_sys_counter
210NET: Registered protocol family 2
211TCP established hash table entries: 2048 (order: 1, 8192 bytes)
212TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
213TCP: Hash tables configured (established 2048 bind 2048)
214TCP: reno registered
215UDP hash table entries: 256 (order: 1, 8192 bytes)
216UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
217NET: Registered protocol family 1
218RPC: Registered named UNIX socket transport module.
219RPC: Registered udp transport module.
220RPC: Registered tcp transport module.
221RPC: Registered tcp NFSv4.1 backchannel transport module.
222PCI: CLS 64 bytes, default 64
223hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
224jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
225msgmni has been set to 460
226io scheduler noop registered (default)
227brd: module loaded
228loop: module loaded
229ata_piix 0000:00:01.0: version 2.13
230PCI: enabling device 0000:00:01.0 (0040 -> 0041)
231scsi0 : ata_piix
232scsi1 : ata_piix
233ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
234ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
235e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
236e100: Copyright(c) 1999-2006 Intel Corporation
237e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
238e1000: Copyright (c) 1999-2006 Intel Corporation.
239PCI: enabling device 0000:00:00.0 (0040 -> 0042)
240ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
241ata1.00: 1048320 sectors, multi 0: LBA
242ata1.00: configured for UDMA/33
243scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
244sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
245sd 0:0:0:0: [sda] Write Protect is off
246sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
247sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
248sd 0:0:0:0: Attached scsi generic sg0 type 0
249 sda: sda1
250sd 0:0:0:0: [sda] Attached SCSI disk
251e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
252e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
253e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
254e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
255igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
256igb: Copyright (c) 2007-2013 Intel Corporation.
257igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
258igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
259ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
260ixgbe: Copyright (c) 1999-2013 Intel Corporation.
261ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.11.3-k
262ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
263ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
264ixgb: Copyright (c) 1999-2008 Intel Corporation.
265smsc911x: Driver version 2008-10-21
266smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
267nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
268nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
269nxp-isp1760 1b000000.usb: Scratch test failed.
270nxp-isp1760 1b000000.usb: can't setup: -19
271nxp-isp1760 1b000000.usb: USB bus 1 deregistered
272usbcore: registered new interface driver usb-storage
273mousedev: PS/2 mouse device common for all mice
274rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
275usbcore: registered new interface driver usbhid
276usbhid: USB HID core driver
277ashmem: initialized
278logger: created 256K log 'log_main'
279logger: created 256K log 'log_events'
280logger: created 256K log 'log_radio'
281logger: created 256K log 'log_system'
282oprofile: using timer interrupt.
283TCP: cubic registered
284NET: Registered protocol family 10
285NET: Registered protocol family 17
286rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 12:00:00 UTC (1230811200)
287ALSA device list:
288 No soundcards found.
289 input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
290input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
291VFS: Mounted root (ext2 filesystem) on device 8:1.
292Freeing unused kernel memory: 292K (806aa000 - 806f3000)
293
|
144init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
145
| 294init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
295
|
146starting pid 333, tty '': '/etc/rc.d/rc.local'
| 296starting pid 680, tty '': '/etc/rc.d/rc.local'
|
147warning: can't open /etc/mtab: No such file or directory
| 297warning: can't open /etc/mtab: No such file or directory
|
148Thu Jan 1 00:00:00 UTC 1970
| 298Thu Jan 1 12:00:02 UTC 2009
|
149S: devpts
| 299S: devpts
|
150Thu Jan 1 00:00:00 UTC 1970
| 300Thu Jan 1 12:00:02 UTC 2009
|
| |