1[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
2
3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
4
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
6
7[ 0.000000] Machine: ARM-RealView PBX
8
9[ 0.000000] Ignoring unrecognised tag 0x00000000
10
11[ 0.000000] bootconsole [earlycon0] enabled
12
13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
14
15[ 0.000000] On node 0 totalpages: 32768
16
17[ 0.000000] DMA zone: 256 pages used for memmap
18
19[ 0.000000] DMA zone: 0 pages reserved
20
21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
22
23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
24
25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
26
27[ 0.000000] pcpu-alloc: [0] 0 [0] 1
28
29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
30
31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
32
33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
34
35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
36
37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
38
39[ 0.000000] Memory: 128MB = 128MB total
40
41[ 0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem
42
43[ 0.000000] Virtual kernel memory layout:
44
45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
46
47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
48
49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
50
51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
52
53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
54
55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
56
57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
58
59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
60
61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
62
63[ 0.000000] Hierarchical RCU implementation.
64
65[ 0.000000] RCU-based detection of stalled CPUs is disabled.
66
67[ 0.000000] NR_IRQS:128
68
69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
70
71[ 0.000000] Console: colour dummy device 80x30
72
73[ 0.000061] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
74
75[ 0.000069] pid_max: default: 32768 minimum: 301
76
77[ 0.000130] Mount-cache hash table entries: 512
78
79[ 0.000234] CPU: Testing write buffer coherency: ok
80
81[ 0.000253] Calibrating local timer... 1000.00MHz.
82
83[ 0.060104] CPU1: Booted secondary processor
84
85[ 0.060115] CPU1: Unknown IPI message 0x1
86
87[ 0.060127] Brought up 2 CPUs
88
89[ 0.060133] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
90
91[ 0.060180] devtmpfs: initialized
92
93[ 0.060720] NET: Registered protocol family 16
94
95[ 0.061057] Serial: AMBA PL011 UART driver
96
97[ 0.061070] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
98
99[ 0.061076] console [ttyAMA0] enabled, bootconsole disabled
100[ 0.061076] console [ttyAMA0] enabled, bootconsole disabled
101
102[ 0.062351] bio: create slab <bio-0> at 0
103[ 0.062557] SCSI subsystem initialized
104[ 0.062619] libata version 3.00 loaded.
105[ 0.062780] Switching to clocksource timer3
106[ 0.065082] NET: Registered protocol family 2
107[ 0.065112] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
108[ 0.065188] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
109[ 0.065217] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
110[ 0.065244] TCP: Hash tables configured (established 4096 bind 4096)
111[ 0.065248] TCP reno registered
112[ 0.065252] UDP hash table entries: 128 (order: 0, 4096 bytes)
113[ 0.065262] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
114[ 0.065332] NET: Registered protocol family 1
115[ 0.065648] msgmni has been set to 244
116[ 0.065656] io scheduler noop registered (default)
117[ 0.066116] CLCD: RealView hardware, XVGA display
118[ 0.093218] Console: switching to colour frame buffer device 128x48
119[ 0.098678] brd: module loaded
120[ 0.099561] loop: module loaded
121[ 0.099871] scsi0 : pata_platform
122[ 0.099946] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
123[ 0.100164] slram: not enough parameters.
124[ 0.100308] mousedev: PS/2 mouse device common for all mice
125[ 0.100402] TCP cubic registered
126[ 0.100404] NET: Registered protocol family 17
127[ 0.100409] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
128 [ 0.260218] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
129[ 0.260222] ata1.00: 1048320 sectors, multi 0: LBA
130[ 0.260228] ata1.00: configured for PIO
131[ 0.260282] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
132[ 0.260422] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
133[ 0.260465] sd 0:0:0:0: [sda] Write Protect is off
134[ 0.260470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
135[ 0.260473] sd 0:0:0:0: Attached scsi generic sg0 type 0
136[ 0.260494] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
137[ 0.260805] sda: sda1
138[ 0.260978] sd 0:0:0:0: [sda] Attached SCSI disk
139[ 0.700110] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
140[ 0.840517] VFS: Mounted root (ext2 filesystem) on device 8:1.
141[ 0.840715] devtmpfs: mounted
142[ 0.840727] Freeing init memory: 132K
143
144init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
145
146starting pid 333, tty '': '/etc/rc.d/rc.local'
147warning: can't open /etc/mtab: No such file or directory
148Thu Jan 1 00:00:00 UTC 1970
149S: devpts
150Thu Jan 1 00:00:00 UTC 1970
2
3[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
4
5[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
6
7[ 0.000000] Machine: ARM-RealView PBX
8
9[ 0.000000] Ignoring unrecognised tag 0x00000000
10
11[ 0.000000] bootconsole [earlycon0] enabled
12
13[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
14
15[ 0.000000] On node 0 totalpages: 32768
16
17[ 0.000000] DMA zone: 256 pages used for memmap
18
19[ 0.000000] DMA zone: 0 pages reserved
20
21[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
22
23[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
24
25[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
26
27[ 0.000000] pcpu-alloc: [0] 0 [0] 1
28
29[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
30
31[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
32
33[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
34
35[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
36
37[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
38
39[ 0.000000] Memory: 128MB = 128MB total
40
41[ 0.000000] Memory: 125376k/125376k available, 5696k reserved, 0K highmem
42
43[ 0.000000] Virtual kernel memory layout:
44
45[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
46
47[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
48
49[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
50
51[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
52
53[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
54
55[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
56
57[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
58
59[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
60
61[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
62
63[ 0.000000] Hierarchical RCU implementation.
64
65[ 0.000000] RCU-based detection of stalled CPUs is disabled.
66
67[ 0.000000] NR_IRQS:128
68
69[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
70
71[ 0.000000] Console: colour dummy device 80x30
72
73[ 0.000061] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
74
75[ 0.000069] pid_max: default: 32768 minimum: 301
76
77[ 0.000130] Mount-cache hash table entries: 512
78
79[ 0.000234] CPU: Testing write buffer coherency: ok
80
81[ 0.000253] Calibrating local timer... 1000.00MHz.
82
83[ 0.060104] CPU1: Booted secondary processor
84
85[ 0.060115] CPU1: Unknown IPI message 0x1
86
87[ 0.060127] Brought up 2 CPUs
88
89[ 0.060133] SMP: Total of 2 processors activated (7995.39 BogoMIPS).
90
91[ 0.060180] devtmpfs: initialized
92
93[ 0.060720] NET: Registered protocol family 16
94
95[ 0.061057] Serial: AMBA PL011 UART driver
96
97[ 0.061070] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
98
99[ 0.061076] console [ttyAMA0] enabled, bootconsole disabled
100[ 0.061076] console [ttyAMA0] enabled, bootconsole disabled
101
102[ 0.062351] bio: create slab <bio-0> at 0
103[ 0.062557] SCSI subsystem initialized
104[ 0.062619] libata version 3.00 loaded.
105[ 0.062780] Switching to clocksource timer3
106[ 0.065082] NET: Registered protocol family 2
107[ 0.065112] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
108[ 0.065188] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
109[ 0.065217] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
110[ 0.065244] TCP: Hash tables configured (established 4096 bind 4096)
111[ 0.065248] TCP reno registered
112[ 0.065252] UDP hash table entries: 128 (order: 0, 4096 bytes)
113[ 0.065262] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
114[ 0.065332] NET: Registered protocol family 1
115[ 0.065648] msgmni has been set to 244
116[ 0.065656] io scheduler noop registered (default)
117[ 0.066116] CLCD: RealView hardware, XVGA display
118[ 0.093218] Console: switching to colour frame buffer device 128x48
119[ 0.098678] brd: module loaded
120[ 0.099561] loop: module loaded
121[ 0.099871] scsi0 : pata_platform
122[ 0.099946] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
123[ 0.100164] slram: not enough parameters.
124[ 0.100308] mousedev: PS/2 mouse device common for all mice
125[ 0.100402] TCP cubic registered
126[ 0.100404] NET: Registered protocol family 17
127[ 0.100409] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
128 [ 0.260218] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
129[ 0.260222] ata1.00: 1048320 sectors, multi 0: LBA
130[ 0.260228] ata1.00: configured for PIO
131[ 0.260282] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
132[ 0.260422] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
133[ 0.260465] sd 0:0:0:0: [sda] Write Protect is off
134[ 0.260470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
135[ 0.260473] sd 0:0:0:0: Attached scsi generic sg0 type 0
136[ 0.260494] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
137[ 0.260805] sda: sda1
138[ 0.260978] sd 0:0:0:0: [sda] Attached SCSI disk
139[ 0.700110] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
140[ 0.840517] VFS: Mounted root (ext2 filesystem) on device 8:1.
141[ 0.840715] devtmpfs: mounted
142[ 0.840727] Freeing init memory: 132K
143
144init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
145
146starting pid 333, tty '': '/etc/rc.d/rc.local'
147warning: can't open /etc/mtab: No such file or directory
148Thu Jan 1 00:00:00 UTC 1970
149S: devpts
150Thu Jan 1 00:00:00 UTC 1970