system.terminal (11570:4aac82f10951) system.terminal (11680:b4d943429dc6)
1[ 0.000000] Initializing cgroup subsys cpu
2[ 0.000000] Linux version 3.16.0-rc6 (tony@vamp) (gcc version 4.8.2 20140110 (prerelease) [ibm/gcc-4_8-branch merged from gcc-4_8-branch, revision 205847] (Ubuntu/Linaro 4.8.2-13ubuntu1) ) #1 SMP PREEMPT Wed Oct 1 14:39:23 EDT 2014
3[ 0.000000] CPU: AArch64 Processor [410fc0f0] revision 0
4[ 0.000000] No Cache Writeback Granule information, assuming cache line size 64
5[ 0.000000] Memory limited to 256MB
6[ 0.000000] cma: CMA: reserved 16 MiB at 8f000000
7[ 0.000000] On node 0 totalpages: 65536
8[ 0.000000] DMA zone: 896 pages used for memmap

--- 18 unchanged lines hidden (view full) ---

27[ 0.000000] .data : 0xffffffc0006c7000 - 0xffffffc0007141e0 ( 309 kB)
28[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
29[ 0.000000] Preemptible hierarchical RCU implementation.
30[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
31[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
32[ 0.000000] NR_IRQS:64 nr_irqs:64 0
33[ 0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
34[ 0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns
1[ 0.000000] Initializing cgroup subsys cpu
2[ 0.000000] Linux version 3.16.0-rc6 (tony@vamp) (gcc version 4.8.2 20140110 (prerelease) [ibm/gcc-4_8-branch merged from gcc-4_8-branch, revision 205847] (Ubuntu/Linaro 4.8.2-13ubuntu1) ) #1 SMP PREEMPT Wed Oct 1 14:39:23 EDT 2014
3[ 0.000000] CPU: AArch64 Processor [410fc0f0] revision 0
4[ 0.000000] No Cache Writeback Granule information, assuming cache line size 64
5[ 0.000000] Memory limited to 256MB
6[ 0.000000] cma: CMA: reserved 16 MiB at 8f000000
7[ 0.000000] On node 0 totalpages: 65536
8[ 0.000000] DMA zone: 896 pages used for memmap

--- 18 unchanged lines hidden (view full) ---

27[ 0.000000] .data : 0xffffffc0006c7000 - 0xffffffc0007141e0 ( 309 kB)
28[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
29[ 0.000000] Preemptible hierarchical RCU implementation.
30[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
31[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
32[ 0.000000] NR_IRQS:64 nr_irqs:64 0
33[ 0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
34[ 0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns
35[ 0.000027] Console: colour dummy device 80x25
36[ 0.000030] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
37[ 0.000032] pid_max: default: 32768 minimum: 301
38[ 0.000045] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
39[ 0.000047] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
40[ 0.000186] hw perfevents: no hardware support available
41[ 0.060051] CPU1: Booted secondary processor
42[ 1.080095] CPU2: failed to come online
43[ 2.100183] CPU3: failed to come online
44[ 2.100186] Brought up 2 CPUs
45[ 2.100188] SMP: Total of 2 processors activated.
46[ 2.100259] devtmpfs: initialized
47[ 2.100898] atomic64_test: passed
48[ 2.100952] regulator-dummy: no parameters
49[ 2.101389] NET: Registered protocol family 16
50[ 2.101557] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
51[ 2.101563] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
52[ 2.102363] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
53[ 2.102366] Serial: AMBA PL011 UART driver
54[ 2.102592] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
55[ 2.102637] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
56[ 2.103214] console [ttyAMA0] enabled
57[ 2.103383] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
58[ 2.103459] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
59[ 2.103535] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
60[ 2.103603] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
61[ 2.130362] 3V3: 3300 mV
62[ 2.130420] vgaarb: loaded
63[ 2.130477] SCSI subsystem initialized
64[ 2.130513] libata version 3.00 loaded.
65[ 2.130567] usbcore: registered new interface driver usbfs
66[ 2.130587] usbcore: registered new interface driver hub
67[ 2.130614] usbcore: registered new device driver usb
68[ 2.130645] pps_core: LinuxPPS API ver. 1 registered
69[ 2.130654] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
70[ 2.130674] PTP clock support registered
71[ 2.130822] Switched to clocksource arch_sys_counter
72[ 2.132478] NET: Registered protocol family 2
73[ 2.132574] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
74[ 2.132593] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
75[ 2.132613] TCP: Hash tables configured (established 2048 bind 2048)
76[ 2.132642] TCP: reno registered
77[ 2.132649] UDP hash table entries: 256 (order: 1, 8192 bytes)
78[ 2.132663] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
79[ 2.132704] NET: Registered protocol family 1
80[ 2.132763] RPC: Registered named UNIX socket transport module.
81[ 2.132774] RPC: Registered udp transport module.
82[ 2.132782] RPC: Registered tcp transport module.
83[ 2.132791] RPC: Registered tcp NFSv4.1 backchannel transport module.
84[ 2.132804] PCI: CLS 0 bytes, default 64
85[ 2.133012] futex hash table entries: 1024 (order: 4, 65536 bytes)
86[ 2.133128] HugeTLB registered 2 MB page size, pre-allocated 0 pages
87[ 2.135205] fuse init (API version 7.23)
88[ 2.135350] msgmni has been set to 469
89[ 2.135656] io scheduler noop registered
90[ 2.135718] io scheduler cfq registered (default)
91[ 2.136286] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
92[ 2.136300] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
93[ 2.136311] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
94[ 2.136324] pci_bus 0000:00: root bus resource [bus 00-ff]
95[ 2.136335] pci_bus 0000:00: scanning bus
96[ 2.136346] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
97[ 2.136360] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
98[ 2.136375] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
99[ 2.136416] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
100[ 2.136429] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
101[ 2.136440] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
102[ 2.136452] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
103[ 2.136463] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
104[ 2.136474] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
105[ 2.136486] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
106[ 2.136527] pci_bus 0000:00: fixups for bus
107[ 2.136536] pci_bus 0000:00: bus scan returning with max=00
108[ 2.136548] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
109[ 2.136569] pci 0000:00:00.0: fixup irq: got 33
110[ 2.136578] pci 0000:00:00.0: assigning IRQ 33
111[ 2.136589] pci 0000:00:01.0: fixup irq: got 34
112[ 2.136598] pci 0000:00:01.0: assigning IRQ 34
113[ 2.136609] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
114[ 2.136623] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
115[ 2.136636] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
116[ 2.136650] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
117[ 2.136662] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
118[ 2.136674] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
119[ 2.136686] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
120[ 2.136698] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
121[ 2.137491] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
122[ 2.137826] ata_piix 0000:00:01.0: version 2.13
123[ 2.137837] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
124[ 2.137864] ata_piix 0000:00:01.0: enabling bus mastering
125[ 2.138204] scsi0 : ata_piix
126[ 2.138329] scsi1 : ata_piix
127[ 2.138380] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
128[ 2.138393] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
129[ 2.138543] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
130[ 2.138556] e1000: Copyright (c) 1999-2006 Intel Corporation.
131[ 2.138573] e1000 0000:00:00.0: enabling device (0000 -> 0002)
132[ 2.138585] e1000 0000:00:00.0: enabling bus mastering
133[ 2.280852] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
134[ 2.280862] ata1.00: 2096640 sectors, multi 0: LBA
135[ 2.280892] ata1.00: configured for UDMA/33
136[ 2.280951] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
137[ 2.281082] sd 0:0:0:0: Attached scsi generic sg0 type 0
138[ 2.281116] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
139[ 2.281160] sd 0:0:0:0: [sda] Write Protect is off
140[ 2.281170] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
141[ 2.281192] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
142[ 2.281337] sda: sda1
143[ 2.281470] sd 0:0:0:0: [sda] Attached SCSI disk
144[ 2.401164] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
145[ 2.401177] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
146[ 2.401211] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
147[ 2.401224] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
148[ 2.401253] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
149[ 2.401268] igb: Copyright (c) 2007-2014 Intel Corporation.
150[ 2.401414] usbcore: registered new interface driver usb-storage
151[ 2.401486] mousedev: PS/2 mouse device common for all mice
152[ 2.401677] usbcore: registered new interface driver usbhid
153[ 2.401687] usbhid: USB HID core driver
154[ 2.401726] TCP: cubic registered
155[ 2.401734] NET: Registered protocol family 17
156[ 2.402177] VFS: Mounted root (ext2 filesystem) on device 8:1.
157[ 2.402215] devtmpfs: mounted
158[ 2.402270] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
35[ 0.000029] Console: colour dummy device 80x25
36[ 0.000031] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
37[ 0.000033] pid_max: default: 32768 minimum: 301
38[ 0.000047] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
39[ 0.000048] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
40[ 0.000190] hw perfevents: no hardware support available
41[ 0.060052] CPU1: Booted secondary processor
42[ 1.080092] CPU2: failed to come online
43[ 2.100178] CPU3: failed to come online
44[ 2.100181] Brought up 2 CPUs
45[ 2.100182] SMP: Total of 2 processors activated.
46[ 2.100254] devtmpfs: initialized
47[ 2.100899] atomic64_test: passed
48[ 2.100953] regulator-dummy: no parameters
49[ 2.101395] NET: Registered protocol family 16
50[ 2.101565] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
51[ 2.101572] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
52[ 2.102371] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
53[ 2.102374] Serial: AMBA PL011 UART driver
54[ 2.102603] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
55[ 2.102648] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
56[ 2.103226] console [ttyAMA0] enabled
57[ 2.103397] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
58[ 2.103474] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
59[ 2.103550] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
60[ 2.103618] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
61[ 2.130484] 3V3: 3300 mV
62[ 2.130542] vgaarb: loaded
63[ 2.130598] SCSI subsystem initialized
64[ 2.130640] libata version 3.00 loaded.
65[ 2.130696] usbcore: registered new interface driver usbfs
66[ 2.130716] usbcore: registered new interface driver hub
67[ 2.130745] usbcore: registered new device driver usb
68[ 2.130775] pps_core: LinuxPPS API ver. 1 registered
69[ 2.130785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
70[ 2.130805] PTP clock support registered
71[ 2.130963] Switched to clocksource arch_sys_counter
72[ 2.132610] NET: Registered protocol family 2
73[ 2.132708] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
74[ 2.132728] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
75[ 2.132748] TCP: Hash tables configured (established 2048 bind 2048)
76[ 2.132775] TCP: reno registered
77[ 2.132782] UDP hash table entries: 256 (order: 1, 8192 bytes)
78[ 2.132796] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
79[ 2.132838] NET: Registered protocol family 1
80[ 2.132904] RPC: Registered named UNIX socket transport module.
81[ 2.132915] RPC: Registered udp transport module.
82[ 2.132923] RPC: Registered tcp transport module.
83[ 2.132932] RPC: Registered tcp NFSv4.1 backchannel transport module.
84[ 2.132945] PCI: CLS 0 bytes, default 64
85[ 2.133141] futex hash table entries: 1024 (order: 4, 65536 bytes)
86[ 2.133256] HugeTLB registered 2 MB page size, pre-allocated 0 pages
87[ 2.135328] fuse init (API version 7.23)
88[ 2.135440] msgmni has been set to 469
89[ 2.135797] io scheduler noop registered
90[ 2.135862] io scheduler cfq registered (default)
91[ 2.136433] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
92[ 2.136447] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
93[ 2.136458] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
94[ 2.136472] pci_bus 0000:00: root bus resource [bus 00-ff]
95[ 2.136482] pci_bus 0000:00: scanning bus
96[ 2.136494] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
97[ 2.136508] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
98[ 2.136523] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
99[ 2.136564] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
100[ 2.136577] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
101[ 2.136588] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
102[ 2.136600] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
103[ 2.136611] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
104[ 2.136622] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
105[ 2.136634] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
106[ 2.136675] pci_bus 0000:00: fixups for bus
107[ 2.136684] pci_bus 0000:00: bus scan returning with max=00
108[ 2.136697] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
109[ 2.136718] pci 0000:00:00.0: fixup irq: got 33
110[ 2.136727] pci 0000:00:00.0: assigning IRQ 33
111[ 2.136739] pci 0000:00:01.0: fixup irq: got 34
112[ 2.136748] pci 0000:00:01.0: assigning IRQ 34
113[ 2.136760] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
114[ 2.136773] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
115[ 2.136787] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
116[ 2.136801] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
117[ 2.136813] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
118[ 2.136825] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
119[ 2.136837] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
120[ 2.136849] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
121[ 2.137426] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
122[ 2.137740] ata_piix 0000:00:01.0: version 2.13
123[ 2.137750] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
124[ 2.137778] ata_piix 0000:00:01.0: enabling bus mastering
125[ 2.138110] scsi0 : ata_piix
126[ 2.138200] scsi1 : ata_piix
127[ 2.138235] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
128[ 2.138247] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
129[ 2.138381] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
130[ 2.138393] e1000: Copyright (c) 1999-2006 Intel Corporation.
131[ 2.138410] e1000 0000:00:00.0: enabling device (0000 -> 0002)
132[ 2.138423] e1000 0000:00:00.0: enabling bus mastering
133[ 2.290984] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
134[ 2.290994] ata1.00: 2096640 sectors, multi 0: LBA
135[ 2.291024] ata1.00: configured for UDMA/33
136[ 2.291083] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
137[ 2.291212] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
138[ 2.291226] sd 0:0:0:0: Attached scsi generic sg0 type 0
139[ 2.291255] sd 0:0:0:0: [sda] Write Protect is off
140[ 2.291265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
141[ 2.291288] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
142[ 2.291434] sda: sda1
143[ 2.291570] sd 0:0:0:0: [sda] Attached SCSI disk
144[ 2.411274] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
145[ 2.411288] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
146[ 2.411313] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
147[ 2.411324] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
148[ 2.411348] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
149[ 2.411360] igb: Copyright (c) 2007-2014 Intel Corporation.
150[ 2.411448] usbcore: registered new interface driver usb-storage
151[ 2.411534] mousedev: PS/2 mouse device common for all mice
152[ 2.411744] usbcore: registered new interface driver usbhid
153[ 2.411754] usbhid: USB HID core driver
154[ 2.411794] TCP: cubic registered
155[ 2.411802] NET: Registered protocol family 17
156[ 2.412301] VFS: Mounted root (ext2 filesystem) on device 8:1.
157[ 2.412341] devtmpfs: mounted
158[ 2.412395] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
159
160INIT: version 2.88 booting
161
162Starting udev
159
160INIT: version 2.88 booting
161
162Starting udev
163[ 2.442337] udevd[608]: starting version 182
163[ 2.452586] udevd[609]: starting version 182
164Starting Bootlog daemon: bootlogd.
165
164Starting Bootlog daemon: bootlogd.
165
166[ 2.533997] random: dd urandom read with 18 bits of entropy available
166[ 2.534161] random: dd urandom read with 18 bits of entropy available
167Populating dev cache
168
169net.ipv4.conf.default.rp_filter = 1
170
171net.ipv4.conf.all.rp_filter = 1
172
173hwclock: can't open '/dev/misc/rtc': No such file or directory
174
175Mon Jan 27 08:00:00 UTC 2014
176
177hwclock: can't open '/dev/misc/rtc': No such file or directory
178
179
180INIT: Entering runlevel: 5
181
182
183Configuring network interfaces... udhcpc (v1.21.1) started
184
167Populating dev cache
168
169net.ipv4.conf.default.rp_filter = 1
170
171net.ipv4.conf.all.rp_filter = 1
172
173hwclock: can't open '/dev/misc/rtc': No such file or directory
174
175Mon Jan 27 08:00:00 UTC 2014
176
177hwclock: can't open '/dev/misc/rtc': No such file or directory
178
179
180INIT: Entering runlevel: 5
181
182
183Configuring network interfaces... udhcpc (v1.21.1) started
184
185[ 2.671053] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
185[ 2.671190] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
186Sending discover...
187
188Sending discover...
189
190Sending discover...
191
192No lease, forking to background
193

--- 17 unchanged lines hidden --- 		186Sending discover...
187
188Sending discover...
189
190Sending discover...
191
192No lease, forking to background
193

--- 17 unchanged lines hidden ---