35,41c35,41
< [ 0.000023] Console: colour dummy device 80x25
< [ 0.000025] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
< [ 0.000027] pid_max: default: 32768 minimum: 301
< [ 0.000038] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
< [ 0.000039] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
< [ 0.000155] hw perfevents: no hardware support available
< [ 0.060041] CPU1: Booted secondary processor
---
> [ 0.000024] Console: colour dummy device 80x25
> [ 0.000027] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
> [ 0.000028] pid_max: default: 32768 minimum: 301
> [ 0.000039] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> [ 0.000040] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
> [ 0.000160] hw perfevents: no hardware support available
> [ 0.060042] CPU1: Booted secondary processor
43,45c43,45
< [ 2.100151] CPU3: failed to come online
< [ 2.100154] Brought up 2 CPUs
< [ 2.100155] SMP: Total of 2 processors activated.
---
> [ 2.100148] CPU3: failed to come online
> [ 2.100151] Brought up 2 CPUs
> [ 2.100152] SMP: Total of 2 processors activated.
47,158c47,158
< [ 2.100722] atomic64_test: passed
< [ 2.100767] regulator-dummy: no parameters
< [ 2.101110] NET: Registered protocol family 16
< [ 2.101240] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
< [ 2.101248] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
< [ 2.101651] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
< [ 2.101655] Serial: AMBA PL011 UART driver
< [ 2.101841] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
< [ 2.101878] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
< [ 2.102452] console [ttyAMA0] enabled
< [ 2.102605] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
< [ 2.102668] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
< [ 2.102733] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
< [ 2.102790] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
< [ 2.140329] 3V3: 3300 mV
< [ 2.140389] vgaarb: loaded
< [ 2.140455] SCSI subsystem initialized
< [ 2.140504] libata version 3.00 loaded.
< [ 2.140588] usbcore: registered new interface driver usbfs
< [ 2.140613] usbcore: registered new interface driver hub
< [ 2.140641] usbcore: registered new device driver usb
< [ 2.140687] pps_core: LinuxPPS API ver. 1 registered
< [ 2.140698] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
< [ 2.140722] PTP clock support registered
< [ 2.140900] Switched to clocksource arch_sys_counter
< [ 2.142431] NET: Registered protocol family 2
< [ 2.142518] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
< [ 2.142535] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
< [ 2.142552] TCP: Hash tables configured (established 2048 bind 2048)
< [ 2.142574] TCP: reno registered
< [ 2.142581] UDP hash table entries: 256 (order: 1, 8192 bytes)
< [ 2.142593] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
< [ 2.142627] NET: Registered protocol family 1
< [ 2.142670] RPC: Registered named UNIX socket transport module.
< [ 2.142681] RPC: Registered udp transport module.
< [ 2.142689] RPC: Registered tcp transport module.
< [ 2.142698] RPC: Registered tcp NFSv4.1 backchannel transport module.
< [ 2.142710] PCI: CLS 0 bytes, default 64
< [ 2.142942] futex hash table entries: 1024 (order: 4, 65536 bytes)
< [ 2.143052] HugeTLB registered 2 MB page size, pre-allocated 0 pages
< [ 2.145204] fuse init (API version 7.23)
< [ 2.145320] msgmni has been set to 469
< [ 2.145427] io scheduler noop registered
< [ 2.145479] io scheduler cfq registered (default)
< [ 2.145859] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
< [ 2.145872] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
< [ 2.145883] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
< [ 2.145896] pci_bus 0000:00: root bus resource [bus 00-ff]
< [ 2.145906] pci_bus 0000:00: scanning bus
< [ 2.145917] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
< [ 2.145930] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
< [ 2.145945] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
< [ 2.145979] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
< [ 2.145991] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
< [ 2.146002] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
< [ 2.146013] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
< [ 2.146024] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
< [ 2.146035] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
< [ 2.146046] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
< [ 2.146081] pci_bus 0000:00: fixups for bus
< [ 2.146089] pci_bus 0000:00: bus scan returning with max=00
< [ 2.146101] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
< [ 2.146121] pci 0000:00:00.0: fixup irq: got 33
< [ 2.146129] pci 0000:00:00.0: assigning IRQ 33
< [ 2.146140] pci 0000:00:01.0: fixup irq: got 34
< [ 2.146149] pci 0000:00:01.0: assigning IRQ 34
< [ 2.146160] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
< [ 2.146173] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
< [ 2.146186] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
< [ 2.146199] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
< [ 2.146211] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
< [ 2.146222] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
< [ 2.146234] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
< [ 2.146245] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
< [ 2.146902] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
< [ 2.147174] ata_piix 0000:00:01.0: version 2.13
< [ 2.147184] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
< [ 2.147208] ata_piix 0000:00:01.0: enabling bus mastering
< [ 2.147469] scsi0 : ata_piix
< [ 2.147563] scsi1 : ata_piix
< [ 2.147592] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
< [ 2.147605] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
< [ 2.147706] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
< [ 2.147719] e1000: Copyright (c) 1999-2006 Intel Corporation.
< [ 2.147733] e1000 0000:00:00.0: enabling device (0000 -> 0002)
< [ 2.147745] e1000 0000:00:00.0: enabling bus mastering
< [ 2.290935] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 2.290946] ata1.00: 2096640 sectors, multi 0: LBA
< [ 2.290974] ata1.00: configured for UDMA/33
< [ 2.291028] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 2.291135] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
< [ 2.291142] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 2.291184] sd 0:0:0:0: [sda] Write Protect is off
< [ 2.291194] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 2.291214] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 2.291351] sda: sda1
< [ 2.291468] sd 0:0:0:0: [sda] Attached SCSI disk
< [ 2.411201] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
< [ 2.411215] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
< [ 2.411238] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
< [ 2.411249] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
< [ 2.411270] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
< [ 2.411282] igb: Copyright (c) 2007-2014 Intel Corporation.
< [ 2.411355] usbcore: registered new interface driver usb-storage
< [ 2.411408] mousedev: PS/2 mouse device common for all mice
< [ 2.411558] usbcore: registered new interface driver usbhid
< [ 2.411568] usbhid: USB HID core driver
< [ 2.411600] TCP: cubic registered
< [ 2.411608] NET: Registered protocol family 17
< [ 2.411950] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.411985] devtmpfs: mounted
< [ 2.412018] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
---
> [ 2.100728] atomic64_test: passed
> [ 2.100773] regulator-dummy: no parameters
> [ 2.101119] NET: Registered protocol family 16
> [ 2.101251] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
> [ 2.101259] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
> [ 2.101662] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
> [ 2.101665] Serial: AMBA PL011 UART driver
> [ 2.101855] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
> [ 2.101892] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
> [ 2.102468] console [ttyAMA0] enabled
> [ 2.102623] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
> [ 2.102687] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
> [ 2.102745] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
> [ 2.102803] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
> [ 2.140306] 3V3: 3300 mV
> [ 2.140354] vgaarb: loaded
> [ 2.140400] SCSI subsystem initialized
> [ 2.140435] libata version 3.00 loaded.
> [ 2.140482] usbcore: registered new interface driver usbfs
> [ 2.140500] usbcore: registered new interface driver hub
> [ 2.140526] usbcore: registered new device driver usb
> [ 2.140554] pps_core: LinuxPPS API ver. 1 registered
> [ 2.140564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 2.140583] PTP clock support registered
> [ 2.140715] Switched to clocksource arch_sys_counter
> [ 2.142179] NET: Registered protocol family 2
> [ 2.142255] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
> [ 2.142273] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
> [ 2.142290] TCP: Hash tables configured (established 2048 bind 2048)
> [ 2.142312] TCP: reno registered
> [ 2.142319] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 2.142331] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 2.142367] NET: Registered protocol family 1
> [ 2.142431] RPC: Registered named UNIX socket transport module.
> [ 2.142441] RPC: Registered udp transport module.
> [ 2.142450] RPC: Registered tcp transport module.
> [ 2.142458] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 2.142471] PCI: CLS 0 bytes, default 64
> [ 2.142634] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 2.142729] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 2.144357] fuse init (API version 7.23)
> [ 2.144445] msgmni has been set to 469
> [ 2.144792] io scheduler noop registered
> [ 2.144847] io scheduler cfq registered (default)
> [ 2.145229] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
> [ 2.145243] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> [ 2.145255] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
> [ 2.145268] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 2.145278] pci_bus 0000:00: scanning bus
> [ 2.145289] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
> [ 2.145303] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
> [ 2.145317] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
> [ 2.145353] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
> [ 2.145366] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
> [ 2.145377] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
> [ 2.145388] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
> [ 2.145399] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
> [ 2.145410] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
> [ 2.145421] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
> [ 2.145456] pci_bus 0000:00: fixups for bus
> [ 2.145464] pci_bus 0000:00: bus scan returning with max=00
> [ 2.145476] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
> [ 2.145496] pci 0000:00:00.0: fixup irq: got 33
> [ 2.145505] pci 0000:00:00.0: assigning IRQ 33
> [ 2.145516] pci 0000:00:01.0: fixup irq: got 34
> [ 2.145525] pci 0000:00:01.0: assigning IRQ 34
> [ 2.145537] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
> [ 2.145551] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
> [ 2.145564] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
> [ 2.145577] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
> [ 2.145589] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
> [ 2.145601] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
> [ 2.145612] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
> [ 2.145624] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
> [ 2.146092] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 2.146340] ata_piix 0000:00:01.0: version 2.13
> [ 2.146352] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
> [ 2.146375] ata_piix 0000:00:01.0: enabling bus mastering
> [ 2.146628] scsi0 : ata_piix
> [ 2.146701] scsi1 : ata_piix
> [ 2.146733] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
> [ 2.146746] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
> [ 2.146850] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> [ 2.146863] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [ 2.146877] e1000 0000:00:00.0: enabling device (0000 -> 0002)
> [ 2.146889] e1000 0000:00:00.0: enabling bus mastering
> [ 2.300748] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 2.300759] ata1.00: 2096640 sectors, multi 0: LBA
> [ 2.300788] ata1.00: configured for UDMA/33
> [ 2.300844] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 2.300954] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 2.300958] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
> [ 2.300986] sd 0:0:0:0: [sda] Write Protect is off
> [ 2.300996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.301021] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 2.301150] sda: sda1
> [ 2.301268] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.421014] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
> [ 2.421028] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
> [ 2.421050] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [ 2.421060] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> [ 2.421081] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
> [ 2.421093] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 2.421166] usbcore: registered new interface driver usb-storage
> [ 2.421232] mousedev: PS/2 mouse device common for all mice
> [ 2.421395] usbcore: registered new interface driver usbhid
> [ 2.421405] usbhid: USB HID core driver
> [ 2.421435] TCP: cubic registered
> [ 2.421443] NET: Registered protocol family 17
> [ 2.421846] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.421896] devtmpfs: mounted
> [ 2.421929] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
163c163
< [ 2.450547] udevd[609]: starting version 182
---
> [ 2.460465] udevd[609]: starting version 182
166c166
< [ 2.513635] random: dd urandom read with 17 bits of entropy available
---
> [ 2.543480] random: dd urandom read with 18 bits of entropy available
185c185
< [ 2.641130] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
---
> [ 2.670941] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
211,212d210
< Starting auto-serial-console: done
<
< [ 0.000023] Console: colour dummy device 80x25
< [ 0.000025] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
< [ 0.000027] pid_max: default: 32768 minimum: 301
< [ 0.000038] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
< [ 0.000039] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
< [ 0.000155] hw perfevents: no hardware support available
< [ 0.060041] CPU1: Booted secondary processor
---
> [ 0.000024] Console: colour dummy device 80x25
> [ 0.000027] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
> [ 0.000028] pid_max: default: 32768 minimum: 301
> [ 0.000039] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> [ 0.000040] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
> [ 0.000160] hw perfevents: no hardware support available
> [ 0.060042] CPU1: Booted secondary processor
43,45c43,45
< [ 2.100151] CPU3: failed to come online
< [ 2.100154] Brought up 2 CPUs
< [ 2.100155] SMP: Total of 2 processors activated.
---
> [ 2.100148] CPU3: failed to come online
> [ 2.100151] Brought up 2 CPUs
> [ 2.100152] SMP: Total of 2 processors activated.
47,158c47,158
< [ 2.100722] atomic64_test: passed
< [ 2.100767] regulator-dummy: no parameters
< [ 2.101110] NET: Registered protocol family 16
< [ 2.101240] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
< [ 2.101248] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
< [ 2.101651] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
< [ 2.101655] Serial: AMBA PL011 UART driver
< [ 2.101841] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
< [ 2.101878] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
< [ 2.102452] console [ttyAMA0] enabled
< [ 2.102605] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
< [ 2.102668] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
< [ 2.102733] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
< [ 2.102790] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
< [ 2.140329] 3V3: 3300 mV
< [ 2.140389] vgaarb: loaded
< [ 2.140455] SCSI subsystem initialized
< [ 2.140504] libata version 3.00 loaded.
< [ 2.140588] usbcore: registered new interface driver usbfs
< [ 2.140613] usbcore: registered new interface driver hub
< [ 2.140641] usbcore: registered new device driver usb
< [ 2.140687] pps_core: LinuxPPS API ver. 1 registered
< [ 2.140698] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
< [ 2.140722] PTP clock support registered
< [ 2.140900] Switched to clocksource arch_sys_counter
< [ 2.142431] NET: Registered protocol family 2
< [ 2.142518] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
< [ 2.142535] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
< [ 2.142552] TCP: Hash tables configured (established 2048 bind 2048)
< [ 2.142574] TCP: reno registered
< [ 2.142581] UDP hash table entries: 256 (order: 1, 8192 bytes)
< [ 2.142593] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
< [ 2.142627] NET: Registered protocol family 1
< [ 2.142670] RPC: Registered named UNIX socket transport module.
< [ 2.142681] RPC: Registered udp transport module.
< [ 2.142689] RPC: Registered tcp transport module.
< [ 2.142698] RPC: Registered tcp NFSv4.1 backchannel transport module.
< [ 2.142710] PCI: CLS 0 bytes, default 64
< [ 2.142942] futex hash table entries: 1024 (order: 4, 65536 bytes)
< [ 2.143052] HugeTLB registered 2 MB page size, pre-allocated 0 pages
< [ 2.145204] fuse init (API version 7.23)
< [ 2.145320] msgmni has been set to 469
< [ 2.145427] io scheduler noop registered
< [ 2.145479] io scheduler cfq registered (default)
< [ 2.145859] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
< [ 2.145872] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
< [ 2.145883] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
< [ 2.145896] pci_bus 0000:00: root bus resource [bus 00-ff]
< [ 2.145906] pci_bus 0000:00: scanning bus
< [ 2.145917] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
< [ 2.145930] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
< [ 2.145945] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
< [ 2.145979] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
< [ 2.145991] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
< [ 2.146002] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
< [ 2.146013] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
< [ 2.146024] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
< [ 2.146035] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
< [ 2.146046] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
< [ 2.146081] pci_bus 0000:00: fixups for bus
< [ 2.146089] pci_bus 0000:00: bus scan returning with max=00
< [ 2.146101] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
< [ 2.146121] pci 0000:00:00.0: fixup irq: got 33
< [ 2.146129] pci 0000:00:00.0: assigning IRQ 33
< [ 2.146140] pci 0000:00:01.0: fixup irq: got 34
< [ 2.146149] pci 0000:00:01.0: assigning IRQ 34
< [ 2.146160] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
< [ 2.146173] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
< [ 2.146186] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
< [ 2.146199] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
< [ 2.146211] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
< [ 2.146222] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
< [ 2.146234] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
< [ 2.146245] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
< [ 2.146902] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
< [ 2.147174] ata_piix 0000:00:01.0: version 2.13
< [ 2.147184] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
< [ 2.147208] ata_piix 0000:00:01.0: enabling bus mastering
< [ 2.147469] scsi0 : ata_piix
< [ 2.147563] scsi1 : ata_piix
< [ 2.147592] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
< [ 2.147605] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
< [ 2.147706] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
< [ 2.147719] e1000: Copyright (c) 1999-2006 Intel Corporation.
< [ 2.147733] e1000 0000:00:00.0: enabling device (0000 -> 0002)
< [ 2.147745] e1000 0000:00:00.0: enabling bus mastering
< [ 2.290935] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 2.290946] ata1.00: 2096640 sectors, multi 0: LBA
< [ 2.290974] ata1.00: configured for UDMA/33
< [ 2.291028] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 2.291135] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
< [ 2.291142] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 2.291184] sd 0:0:0:0: [sda] Write Protect is off
< [ 2.291194] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 2.291214] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 2.291351] sda: sda1
< [ 2.291468] sd 0:0:0:0: [sda] Attached SCSI disk
< [ 2.411201] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
< [ 2.411215] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
< [ 2.411238] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
< [ 2.411249] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
< [ 2.411270] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
< [ 2.411282] igb: Copyright (c) 2007-2014 Intel Corporation.
< [ 2.411355] usbcore: registered new interface driver usb-storage
< [ 2.411408] mousedev: PS/2 mouse device common for all mice
< [ 2.411558] usbcore: registered new interface driver usbhid
< [ 2.411568] usbhid: USB HID core driver
< [ 2.411600] TCP: cubic registered
< [ 2.411608] NET: Registered protocol family 17
< [ 2.411950] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.411985] devtmpfs: mounted
< [ 2.412018] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
---
> [ 2.100728] atomic64_test: passed
> [ 2.100773] regulator-dummy: no parameters
> [ 2.101119] NET: Registered protocol family 16
> [ 2.101251] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
> [ 2.101259] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
> [ 2.101662] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
> [ 2.101665] Serial: AMBA PL011 UART driver
> [ 2.101855] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
> [ 2.101892] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
> [ 2.102468] console [ttyAMA0] enabled
> [ 2.102623] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
> [ 2.102687] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
> [ 2.102745] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
> [ 2.102803] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
> [ 2.140306] 3V3: 3300 mV
> [ 2.140354] vgaarb: loaded
> [ 2.140400] SCSI subsystem initialized
> [ 2.140435] libata version 3.00 loaded.
> [ 2.140482] usbcore: registered new interface driver usbfs
> [ 2.140500] usbcore: registered new interface driver hub
> [ 2.140526] usbcore: registered new device driver usb
> [ 2.140554] pps_core: LinuxPPS API ver. 1 registered
> [ 2.140564] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 2.140583] PTP clock support registered
> [ 2.140715] Switched to clocksource arch_sys_counter
> [ 2.142179] NET: Registered protocol family 2
> [ 2.142255] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
> [ 2.142273] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
> [ 2.142290] TCP: Hash tables configured (established 2048 bind 2048)
> [ 2.142312] TCP: reno registered
> [ 2.142319] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 2.142331] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 2.142367] NET: Registered protocol family 1
> [ 2.142431] RPC: Registered named UNIX socket transport module.
> [ 2.142441] RPC: Registered udp transport module.
> [ 2.142450] RPC: Registered tcp transport module.
> [ 2.142458] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 2.142471] PCI: CLS 0 bytes, default 64
> [ 2.142634] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 2.142729] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 2.144357] fuse init (API version 7.23)
> [ 2.144445] msgmni has been set to 469
> [ 2.144792] io scheduler noop registered
> [ 2.144847] io scheduler cfq registered (default)
> [ 2.145229] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
> [ 2.145243] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> [ 2.145255] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
> [ 2.145268] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 2.145278] pci_bus 0000:00: scanning bus
> [ 2.145289] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
> [ 2.145303] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
> [ 2.145317] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
> [ 2.145353] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
> [ 2.145366] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
> [ 2.145377] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
> [ 2.145388] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
> [ 2.145399] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
> [ 2.145410] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
> [ 2.145421] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
> [ 2.145456] pci_bus 0000:00: fixups for bus
> [ 2.145464] pci_bus 0000:00: bus scan returning with max=00
> [ 2.145476] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
> [ 2.145496] pci 0000:00:00.0: fixup irq: got 33
> [ 2.145505] pci 0000:00:00.0: assigning IRQ 33
> [ 2.145516] pci 0000:00:01.0: fixup irq: got 34
> [ 2.145525] pci 0000:00:01.0: assigning IRQ 34
> [ 2.145537] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
> [ 2.145551] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
> [ 2.145564] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
> [ 2.145577] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
> [ 2.145589] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
> [ 2.145601] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
> [ 2.145612] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
> [ 2.145624] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
> [ 2.146092] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 2.146340] ata_piix 0000:00:01.0: version 2.13
> [ 2.146352] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
> [ 2.146375] ata_piix 0000:00:01.0: enabling bus mastering
> [ 2.146628] scsi0 : ata_piix
> [ 2.146701] scsi1 : ata_piix
> [ 2.146733] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
> [ 2.146746] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
> [ 2.146850] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
> [ 2.146863] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [ 2.146877] e1000 0000:00:00.0: enabling device (0000 -> 0002)
> [ 2.146889] e1000 0000:00:00.0: enabling bus mastering
> [ 2.300748] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 2.300759] ata1.00: 2096640 sectors, multi 0: LBA
> [ 2.300788] ata1.00: configured for UDMA/33
> [ 2.300844] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 2.300954] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 2.300958] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
> [ 2.300986] sd 0:0:0:0: [sda] Write Protect is off
> [ 2.300996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.301021] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 2.301150] sda: sda1
> [ 2.301268] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.421014] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
> [ 2.421028] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
> [ 2.421050] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
> [ 2.421060] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
> [ 2.421081] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
> [ 2.421093] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 2.421166] usbcore: registered new interface driver usb-storage
> [ 2.421232] mousedev: PS/2 mouse device common for all mice
> [ 2.421395] usbcore: registered new interface driver usbhid
> [ 2.421405] usbhid: USB HID core driver
> [ 2.421435] TCP: cubic registered
> [ 2.421443] NET: Registered protocol family 17
> [ 2.421846] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.421896] devtmpfs: mounted
> [ 2.421929] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
163c163
< [ 2.450547] udevd[609]: starting version 182
---
> [ 2.460465] udevd[609]: starting version 182
166c166
< [ 2.513635] random: dd urandom read with 17 bits of entropy available
---
> [ 2.543480] random: dd urandom read with 18 bits of entropy available
185c185
< [ 2.641130] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
---
> [ 2.670941] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
211,212d210
< Starting auto-serial-console: done
<