3c3
< [ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
---
> [ 0.000000] CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7f
31c31
< [ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
---
> [ 0.000000] Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
75c75
< [ 0.000173] pid_max: default: 32768 minimum: 301
---
> [ 0.000174] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000293] Mount-cache hash table entries: 512
---
> [ 0.000294] Mount-cache hash table entries: 512
79c79
< [ 0.000462] CPU: Testing write buffer coherency: ok
---
> [ 0.000464] CPU: Testing write buffer coherency: ok
81c81
< [ 0.000625] Brought up 1 CPUs
---
> [ 0.000626] Brought up 1 CPUs
83c83
< [ 0.000652] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
---
> [ 0.000653] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
85c85
< [ 0.000757] devtmpfs: initialized
---
> [ 0.000758] devtmpfs: initialized
87c87
< [ 0.001409] NET: Registered protocol family 16
---
> [ 0.001414] NET: Registered protocol family 16
89c89
< [ 0.002023] Serial: AMBA PL011 UART driver
---
> [ 0.002026] Serial: AMBA PL011 UART driver
91c91
< [ 0.002075] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.002078] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
93,94c93,94
< [ 0.002139] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.002139] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.002141] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.002141] console [ttyAMA0] enabled, bootconsole disabled
96,125c96,125
< [ 0.004213] bio: create slab <bio-0> at 0
< [ 0.004542] SCSI subsystem initialized
< [ 0.004669] libata version 3.00 loaded.
< [ 0.004940] Switching to clocksource timer3
< [ 0.008421] NET: Registered protocol family 2
< [ 0.008486] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.008621] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008688] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008747] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.008785] TCP reno registered
< [ 0.008807] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008848] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008946] NET: Registered protocol family 1
< [ 0.009453] msgmni has been set to 244
< [ 0.009484] io scheduler noop registered (default)
< [ 0.010835] CLCD: RealView hardware, XVGA display
< [ 0.042080] Console: switching to colour frame buffer device 128x48
< [ 0.047025] brd: module loaded
< [ 0.047888] loop: module loaded
< [ 0.048358] scsi0 : pata_platform
< [ 0.048476] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
< [ 0.048797] slram: not enough parameters.
< [ 0.049061] mousedev: PS/2 mouse device common for all mice
< [ 0.049222] TCP cubic registered
< [ 0.049244] NET: Registered protocol family 17
< [ 0.049274] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
< [ 0.200173] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 0.200205] ata1.00: 1048320 sectors, multi 0: LBA
< [ 0.200237] ata1.00: configured for PIO
< [ 0.200339] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
---
> [ 0.004209] bio: create slab <bio-0> at 0
> [ 0.004536] SCSI subsystem initialized
> [ 0.004662] libata version 3.00 loaded.
> [ 0.004931] Switching to clocksource timer3
> [ 0.008397] NET: Registered protocol family 2
> [ 0.008461] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.008595] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008662] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008720] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.008758] TCP reno registered
> [ 0.008780] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008820] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008919] NET: Registered protocol family 1
> [ 0.009420] msgmni has been set to 244
> [ 0.009450] io scheduler noop registered (default)
> [ 0.010869] CLCD: RealView hardware, XVGA display
> [ 0.042079] Console: switching to colour frame buffer device 128x48
> [ 0.047020] brd: module loaded
> [ 0.047884] loop: module loaded
> [ 0.048351] scsi0 : pata_platform
> [ 0.048468] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
> [ 0.048788] slram: not enough parameters.
> [ 0.049051] mousedev: PS/2 mouse device common for all mice
> [ 0.049211] TCP cubic registered
> [ 0.049232] NET: Registered protocol family 17
> [ 0.049262] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
> [ 0.200174] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 0.200206] ata1.00: 1048320 sectors, multi 0: LBA
> [ 0.200238] ata1.00: configured for PIO
> [ 0.200340] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
127c127
< [ 0.200674] sd 0:0:0:0: [sda] Write Protect is off
---
> [ 0.200673] sd 0:0:0:0: [sda] Write Protect is off
130c130
< [ 0.201596] sda: sda1
---
> [ 0.201597] sda: sda1
132c132
< [ 0.201894] sd 0:0:0:0: [sda] Attached SCSI disk
---
> [ 0.201893] sd 0:0:0:0: [sda] Attached SCSI disk
134,137c134,137
< [ 2.240117] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
< [ 2.260919] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.261344] devtmpfs: mounted
< [ 2.261375] Freeing init memory: 132K
---
> [ 2.240116] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.260918] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.261343] devtmpfs: mounted
> [ 2.261374] Freeing init memory: 132K
< [ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
---
> [ 0.000000] CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7f
31c31
< [ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
---
> [ 0.000000] Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
75c75
< [ 0.000173] pid_max: default: 32768 minimum: 301
---
> [ 0.000174] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000293] Mount-cache hash table entries: 512
---
> [ 0.000294] Mount-cache hash table entries: 512
79c79
< [ 0.000462] CPU: Testing write buffer coherency: ok
---
> [ 0.000464] CPU: Testing write buffer coherency: ok
81c81
< [ 0.000625] Brought up 1 CPUs
---
> [ 0.000626] Brought up 1 CPUs
83c83
< [ 0.000652] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
---
> [ 0.000653] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
85c85
< [ 0.000757] devtmpfs: initialized
---
> [ 0.000758] devtmpfs: initialized
87c87
< [ 0.001409] NET: Registered protocol family 16
---
> [ 0.001414] NET: Registered protocol family 16
89c89
< [ 0.002023] Serial: AMBA PL011 UART driver
---
> [ 0.002026] Serial: AMBA PL011 UART driver
91c91
< [ 0.002075] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.002078] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
93,94c93,94
< [ 0.002139] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.002139] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.002141] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.002141] console [ttyAMA0] enabled, bootconsole disabled
96,125c96,125
< [ 0.004213] bio: create slab <bio-0> at 0
< [ 0.004542] SCSI subsystem initialized
< [ 0.004669] libata version 3.00 loaded.
< [ 0.004940] Switching to clocksource timer3
< [ 0.008421] NET: Registered protocol family 2
< [ 0.008486] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.008621] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008688] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008747] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.008785] TCP reno registered
< [ 0.008807] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008848] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008946] NET: Registered protocol family 1
< [ 0.009453] msgmni has been set to 244
< [ 0.009484] io scheduler noop registered (default)
< [ 0.010835] CLCD: RealView hardware, XVGA display
< [ 0.042080] Console: switching to colour frame buffer device 128x48
< [ 0.047025] brd: module loaded
< [ 0.047888] loop: module loaded
< [ 0.048358] scsi0 : pata_platform
< [ 0.048476] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
< [ 0.048797] slram: not enough parameters.
< [ 0.049061] mousedev: PS/2 mouse device common for all mice
< [ 0.049222] TCP cubic registered
< [ 0.049244] NET: Registered protocol family 17
< [ 0.049274] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
< [ 0.200173] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 0.200205] ata1.00: 1048320 sectors, multi 0: LBA
< [ 0.200237] ata1.00: configured for PIO
< [ 0.200339] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
---
> [ 0.004209] bio: create slab <bio-0> at 0
> [ 0.004536] SCSI subsystem initialized
> [ 0.004662] libata version 3.00 loaded.
> [ 0.004931] Switching to clocksource timer3
> [ 0.008397] NET: Registered protocol family 2
> [ 0.008461] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.008595] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008662] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008720] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.008758] TCP reno registered
> [ 0.008780] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008820] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008919] NET: Registered protocol family 1
> [ 0.009420] msgmni has been set to 244
> [ 0.009450] io scheduler noop registered (default)
> [ 0.010869] CLCD: RealView hardware, XVGA display
> [ 0.042079] Console: switching to colour frame buffer device 128x48
> [ 0.047020] brd: module loaded
> [ 0.047884] loop: module loaded
> [ 0.048351] scsi0 : pata_platform
> [ 0.048468] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
> [ 0.048788] slram: not enough parameters.
> [ 0.049051] mousedev: PS/2 mouse device common for all mice
> [ 0.049211] TCP cubic registered
> [ 0.049232] NET: Registered protocol family 17
> [ 0.049262] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
> [ 0.200174] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 0.200206] ata1.00: 1048320 sectors, multi 0: LBA
> [ 0.200238] ata1.00: configured for PIO
> [ 0.200340] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
127c127
< [ 0.200674] sd 0:0:0:0: [sda] Write Protect is off
---
> [ 0.200673] sd 0:0:0:0: [sda] Write Protect is off
130c130
< [ 0.201596] sda: sda1
---
> [ 0.201597] sda: sda1
132c132
< [ 0.201894] sd 0:0:0:0: [sda] Attached SCSI disk
---
> [ 0.201893] sd 0:0:0:0: [sda] Attached SCSI disk
134,137c134,137
< [ 2.240117] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
< [ 2.260919] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.261344] devtmpfs: mounted
< [ 2.261375] Freeing init memory: 132K
---
> [ 2.240116] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.260918] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.261343] devtmpfs: mounted
> [ 2.261374] Freeing init memory: 132K