73c73
< [ 0.000088] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
---
> [ 0.000097] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
75c75
< [ 0.000132] pid_max: default: 32768 minimum: 301
---
> [ 0.000168] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000242] Mount-cache hash table entries: 512
---
> [ 0.000285] Mount-cache hash table entries: 512
79c79
< [ 0.000397] CPU: Testing write buffer coherency: ok
---
> [ 0.000443] CPU: Testing write buffer coherency: ok
81c81
< [ 0.000534] Brought up 1 CPUs
---
> [ 0.000592] Brought up 1 CPUs
83c83
< [ 0.000552] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
---
> [ 0.000619] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
85c85
< [ 0.000636] devtmpfs: initialized
---
> [ 0.000721] devtmpfs: initialized
87c87
< [ 0.001333] NET: Registered protocol family 16
---
> [ 0.001342] NET: Registered protocol family 16
89c89
< [ 0.001941] Serial: AMBA PL011 UART driver
---
> [ 0.001945] Serial: AMBA PL011 UART driver
91c91
< [ 0.001980] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.001996] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
93,94c93,94
< [ 0.002020] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.002020] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.002059] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.002059] console [ttyAMA0] enabled, bootconsole disabled
96,137c96,137
< [ 0.004155] bio: create slab <bio-0> at 0
< [ 0.004478] SCSI subsystem initialized
< [ 0.004596] libata version 3.00 loaded.
< [ 0.004866] Switching to clocksource timer3
< [ 0.008515] NET: Registered protocol family 2
< [ 0.008569] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.008690] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008734] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008775] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.008798] TCP reno registered
< [ 0.008812] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008839] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008927] NET: Registered protocol family 1
< [ 0.009432] msgmni has been set to 244
< [ 0.009454] io scheduler noop registered (default)
< [ 0.010401] CLCD: RealView hardware, XVGA display
< [ 0.043136] Console: switching to colour frame buffer device 128x48
< [ 0.049299] brd: module loaded
< [ 0.050257] loop: module loaded
< [ 0.050756] scsi0 : pata_platform
< [ 0.050874] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
< [ 0.051190] slram: not enough parameters.
< [ 0.051466] mousedev: PS/2 mouse device common for all mice
< [ 0.051625] TCP cubic registered
< [ 0.051639] NET: Registered protocol family 17
< [ 0.051660] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
< [ 0.210166] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 0.210186] ata1.00: 1048320 sectors, multi 0: LBA
< [ 0.210206] ata1.00: configured for PIO
< [ 0.210302] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 0.210523] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
< [ 0.210615] sd 0:0:0:0: [sda] Write Protect is off
< [ 0.210634] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 0.210680] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 0.211448] sda: sda1
< [ 0.211531] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 0.211744] sd 0:0:0:0: [sda] Attached SCSI disk
< [ 0.650122] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
< [ 2.250115] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
< [ 2.270859] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.271241] devtmpfs: mounted
< [ 2.271269] Freeing init memory: 132K
---
> [ 0.004119] bio: create slab <bio-0> at 0
> [ 0.004436] SCSI subsystem initialized
> [ 0.004559] libata version 3.00 loaded.
> [ 0.004824] Switching to clocksource timer3
> [ 0.008257] NET: Registered protocol family 2
> [ 0.008320] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.008450] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008512] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008566] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.008604] TCP reno registered
> [ 0.008625] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008665] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008762] NET: Registered protocol family 1
> [ 0.009253] msgmni has been set to 244
> [ 0.009283] io scheduler noop registered (default)
> [ 0.010427] CLCD: RealView hardware, XVGA display
> [ 0.042149] Console: switching to colour frame buffer device 128x48
> [ 0.047223] brd: module loaded
> [ 0.048101] loop: module loaded
> [ 0.048564] scsi0 : pata_platform
> [ 0.048681] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
> [ 0.049002] slram: not enough parameters.
> [ 0.049270] mousedev: PS/2 mouse device common for all mice
> [ 0.049430] TCP cubic registered
> [ 0.049451] NET: Registered protocol family 17
> [ 0.049481] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
> [ 0.200169] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 0.200202] ata1.00: 1048320 sectors, multi 0: LBA
> [ 0.200233] ata1.00: configured for PIO
> [ 0.200327] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 0.200556] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
> [ 0.200660] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.200691] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.200746] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.201569] sda: sda1
> [ 0.201652] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.201866] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.640119] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
> [ 2.240116] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.260914] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.261336] devtmpfs: mounted
> [ 2.261368] Freeing init memory: 132K
< [ 0.000088] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
---
> [ 0.000097] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
75c75
< [ 0.000132] pid_max: default: 32768 minimum: 301
---
> [ 0.000168] pid_max: default: 32768 minimum: 301
77c77
< [ 0.000242] Mount-cache hash table entries: 512
---
> [ 0.000285] Mount-cache hash table entries: 512
79c79
< [ 0.000397] CPU: Testing write buffer coherency: ok
---
> [ 0.000443] CPU: Testing write buffer coherency: ok
81c81
< [ 0.000534] Brought up 1 CPUs
---
> [ 0.000592] Brought up 1 CPUs
83c83
< [ 0.000552] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
---
> [ 0.000619] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
85c85
< [ 0.000636] devtmpfs: initialized
---
> [ 0.000721] devtmpfs: initialized
87c87
< [ 0.001333] NET: Registered protocol family 16
---
> [ 0.001342] NET: Registered protocol family 16
89c89
< [ 0.001941] Serial: AMBA PL011 UART driver
---
> [ 0.001945] Serial: AMBA PL011 UART driver
91c91
< [ 0.001980] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
---
> [ 0.001996] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
93,94c93,94
< [ 0.002020] console [ttyAMA0] enabled, bootconsole disabled
< [ 0.002020] console [ttyAMA0] enabled, bootconsole disabled
---
> [ 0.002059] console [ttyAMA0] enabled, bootconsole disabled
> [ 0.002059] console [ttyAMA0] enabled, bootconsole disabled
96,137c96,137
< [ 0.004155] bio: create slab <bio-0> at 0
< [ 0.004478] SCSI subsystem initialized
< [ 0.004596] libata version 3.00 loaded.
< [ 0.004866] Switching to clocksource timer3
< [ 0.008515] NET: Registered protocol family 2
< [ 0.008569] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
< [ 0.008690] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008734] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
< [ 0.008775] TCP: Hash tables configured (established 4096 bind 4096)
< [ 0.008798] TCP reno registered
< [ 0.008812] UDP hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008839] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
< [ 0.008927] NET: Registered protocol family 1
< [ 0.009432] msgmni has been set to 244
< [ 0.009454] io scheduler noop registered (default)
< [ 0.010401] CLCD: RealView hardware, XVGA display
< [ 0.043136] Console: switching to colour frame buffer device 128x48
< [ 0.049299] brd: module loaded
< [ 0.050257] loop: module loaded
< [ 0.050756] scsi0 : pata_platform
< [ 0.050874] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
< [ 0.051190] slram: not enough parameters.
< [ 0.051466] mousedev: PS/2 mouse device common for all mice
< [ 0.051625] TCP cubic registered
< [ 0.051639] NET: Registered protocol family 17
< [ 0.051660] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
< [ 0.210166] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
< [ 0.210186] ata1.00: 1048320 sectors, multi 0: LBA
< [ 0.210206] ata1.00: configured for PIO
< [ 0.210302] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
< [ 0.210523] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
< [ 0.210615] sd 0:0:0:0: [sda] Write Protect is off
< [ 0.210634] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
< [ 0.210680] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
< [ 0.211448] sda: sda1
< [ 0.211531] sd 0:0:0:0: Attached scsi generic sg0 type 0
< [ 0.211744] sd 0:0:0:0: [sda] Attached SCSI disk
< [ 0.650122] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
< [ 2.250115] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
< [ 2.270859] VFS: Mounted root (ext2 filesystem) on device 8:1.
< [ 2.271241] devtmpfs: mounted
< [ 2.271269] Freeing init memory: 132K
---
> [ 0.004119] bio: create slab <bio-0> at 0
> [ 0.004436] SCSI subsystem initialized
> [ 0.004559] libata version 3.00 loaded.
> [ 0.004824] Switching to clocksource timer3
> [ 0.008257] NET: Registered protocol family 2
> [ 0.008320] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.008450] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008512] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.008566] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.008604] TCP reno registered
> [ 0.008625] UDP hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008665] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
> [ 0.008762] NET: Registered protocol family 1
> [ 0.009253] msgmni has been set to 244
> [ 0.009283] io scheduler noop registered (default)
> [ 0.010427] CLCD: RealView hardware, XVGA display
> [ 0.042149] Console: switching to colour frame buffer device 128x48
> [ 0.047223] brd: module loaded
> [ 0.048101] loop: module loaded
> [ 0.048564] scsi0 : pata_platform
> [ 0.048681] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
> [ 0.049002] slram: not enough parameters.
> [ 0.049270] mousedev: PS/2 mouse device common for all mice
> [ 0.049430] TCP cubic registered
> [ 0.049451] NET: Registered protocol family 17
> [ 0.049481] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
> [ 0.200169] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
> [ 0.200202] ata1.00: 1048320 sectors, multi 0: LBA
> [ 0.200233] ata1.00: configured for PIO
> [ 0.200327] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
> [ 0.200556] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
> [ 0.200660] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.200691] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.200746] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.201569] sda: sda1
> [ 0.201652] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.201866] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.640119] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
> [ 2.240116] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
> [ 2.260914] VFS: Mounted root (ext2 filesystem) on device 8:1.
> [ 2.261336] devtmpfs: mounted
> [ 2.261368] Freeing init memory: 132K